Ideally we would have a dedicated MachineRepresentation for Smis during
representation selection and use that to properly optimize ObjectIsSmi
(and other ObjectIs<Type> predicates), but that will take some time to
get that done. So in the meantime we can just do simple (local) strength
reduction on ObjectIsSmi to avoid Smi checks in the simplest cases at
least.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2047213002
Cr-Commit-Position: refs/heads/master@{#36809}
This is mostly about DCHECKs. Enabling some requires a few
changes to tests that were not careful about types.
BUG=
Review-Url: https://codereview.chromium.org/2033703002
Cr-Commit-Position: refs/heads/master@{#36734}
- Adds names for float registers to RegisterConfiguration and uses them
when we have the MachineRepresentation.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2030143002
Cr-Commit-Position: refs/heads/master@{#36712}
These speculative binary operators are simplified operators and should
not need a frame state themselves. These eager bailout points can by now
be found via checkpoints in the graph, whereas frame states attached to
nodes directly should always represent lazy bailout points.
R=jarin@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2037673002
Cr-Commit-Position: refs/heads/master@{#36705}
Introduce a dedicated Float64Log machine operator, that is either
implemented by a direct C call or by platform specific code, i.e.
using the FPU on x64 and ia32.
This operator is used to implement Math.log as a proper TurboFan
builtin on top of the CodeStubAssembler.
Also introduce a NumberLog simplified operator on top of Float64Log
and use that for the fast inline path of Math.log inside TurboFan
optimized code.
BUG=v8:5065
Review-Url: https://codereview.chromium.org/2029413005
Cr-Commit-Position: refs/heads/master@{#36703}
This removes the frame state input representing the before-state from
nodes performing property accesses. These frame states can by now be
found via checkpoints in the graph.
R=jarin@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2034673002
Cr-Commit-Position: refs/heads/master@{#36699}
This introduces optimized number operations based on type feedback.
Summary of changes:
1. Typed lowering produces SpeculativeNumberAdd/Subtract for JSAdd/Subtract if
there is suitable feedback. The speculative nodes are connected to both the
effect chain and the control chain and they retain the eager frame state.
2. Simplified lowering now executes in three phases:
a. Propagation phase computes truncations by traversing the graph from uses to
definitions until checkpoint is reached. It also records type-check decisions
for later typing phase, and computes representation.
b. The typing phase computes more precise types base on the speculative types (and recomputes
representation for affected nodes).
c. The lowering phase performs lowering and inserts representation changes and/or checks.
3. Effect-control linearization lowers the checks to machine graphs.
Notes:
- SimplifiedLowering will be refactored to have handling of each operation one place and
with clearer input/output protocol for each sub-phase. I would prefer to do this once
we have more operations implemented, and the pattern is clearer.
- The check operations (Checked<A>To<B>) should have some flags that would affect
the kind of truncations that they can handle. E.g., if we know that a node produces
a number, we can omit the oddball check in the CheckedTaggedToFloat64 lowering.
- In future, we want the typer to reuse the logic from OperationTyper.
BUG=v8:4583
LOG=n
Review-Url: https://codereview.chromium.org/1921563002
Cr-Commit-Position: refs/heads/master@{#36674}
This removes the frame state input representing the before-state from
nodes having the {JSCallFunction} or {JSCallConstruct} operator. These
frame states can by now be found via checkpoints in the graph.
R=bmeurer@chromium.org
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2025573003
Cr-Commit-Position: refs/heads/master@{#36669}
We use StringFromCharCode to optimize calls to String.fromCharCode with
a single Number argument for now. We will use it to also implement the
charAt method on the String prototype.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2037453003
Cr-Commit-Position: refs/heads/master@{#36668}
This adds a very simplistic reduction of {CheckPoint} nodes via the new
{CheckpointElimination}, eliminating redundant check points that appear
in an effect chain of operations that are all {kNoWrite}. Such a chain
allows an arbitrary check point to be chosen. The current approach will
end up choosing the first one for all deopts in the chain.
R=bmeurer@chromium.org
TEST=unittests/CheckpointEliminationTest.CheckPointChain
BUG=v8:5021
Review-Url: https://codereview.chromium.org/2022913003
Cr-Commit-Position: refs/heads/master@{#36634}
This patch enables the following transformations in the instruction
selector:
| Before | After |
|------------------+------------------------|
| and x3, x1, #0x1 | tb{,n}z w1, #0, #+0x78 |
| cmp x3, #0x0 | |
| b.{eq,ne} #+0x80 | |
|------------------+------------------------|
| cmp x0, #0x0 | cb{,n}z x0, #+0x48 |
| b.{eq,ne} #+0x4c | |
I have not seen these patterns beeing generated by turbofan, however the
stubs hit these cases frequently. A particular reason is that we are
turning operations that check for a Smi into a single `tbz`.
As a concequence, the interpreter is affected thanks to inlining
turbofan stubs into it's bytecode handlers. I have noticed the size of
the interpreter was reduced by 200 instructions.
BUG=
Review-Url: https://codereview.chromium.org/2022073002
Cr-Commit-Position: refs/heads/master@{#36632}
Rename some methods to reflect the fact that there are multiple FP
machine representations.
LOG=N
BUG=v8:4124
Review-Url: https://codereview.chromium.org/2013193002
Cr-Commit-Position: refs/heads/master@{#36552}
Adding optional operators for FNeg for WebAssembly, as the current implementation was significantly suboptimal for ARM.
Review-Url: https://codereview.chromium.org/2011303002
Cr-Commit-Position: refs/heads/master@{#36544}
Caching nodes with mutable inputs is a bad idea and already blew up
twice now, so in order to avoid further breakage, let's kill the
EmptyFrameState caching on JSGraph completely and only cache the empty
state values there.
We can remove the hacking from JSTypedLowering completely once we have
the PlainPrimitiveToNumber in action.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2006423003
Cr-Commit-Position: refs/heads/master@{#36511}
This fixes the SharedFunctionInfo::num_literals field for global builtin
functions (e.g. {Object} and friends) to be accurate. The field was not
being updated by Runtime_SetCode. It also removes the dangerous and by
now obsolete JSFunction::NumberOfLiterals accessor.
R=mvstanton@chromium.org
Review-Url: https://codereview.chromium.org/2007943002
Cr-Commit-Position: refs/heads/master@{#36480}
This patch is a follow up to https://codereview.chromium.org/1972103002/
adding support for the `Operand_R_LSL_I` addressing mode to loads and
stores for ARM.
Just as the ARM64 implementation, the shift + load/store pattern is only
really relevant to the interpreter. For this reason, this patch does not
add support for the other addressing modes (`R_LSR_I`, `R_ASR_I` and
`R_ROR_I`) as I haven't seen those pattern being generated. Additionally,
the optimization is restricted 32 bit loads and stores.
kind = BYTECODE_HANDLER
name = Star
compiler = turbofan
Instructions (size = 40)
0x22a5f860 0 e2851001 add r1, r5, #1
0x22a5f864 4 e19610d1 ldrsb r1, [r6, +r1]
0x22a5f868 8 e1a0200b mov r2, fp
0x22a5f86c 12 e7820101 str r0, [r2, +r1, lsl #2]
^^^^^^^^^^^^^^^^^^^^^^^^^
0x22a5f870 16 e2855002 add r5, r5, #2
0x22a5f874 20 e7d61005 ldrb r1, [r6, +r5]
0x22a5f878 24 e7981101 ldr r1, [r8, +r1, lsl #2]
^^^^^^^^^^^^^^^^^^^^^^^^^
0x22a5f87c 28 e12fff11 bx r1
BUG=
Review-Url: https://codereview.chromium.org/1974263002
Cr-Commit-Position: refs/heads/master@{#36381}
The MLS instruction is available in all ARMv7 devices, and in no ARMv6
devices, aside from the usual ARMv6T2 caveat. We don't need a separate
feature flag for it.
BUG=
Review-Url: https://codereview.chromium.org/1988133004
Cr-Commit-Position: refs/heads/master@{#36378}
Remove dead code to optimize Int64Constants as branch/select conditions,
because we either have tagged booleans or bits represented as word32.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1994533002
Cr-Commit-Position: refs/heads/master@{#36308}
The type guard should never be used after the effect/control
linearization pass, so making it a simplified operator better
expresses the intended use. Also this way none of the common
operators actually has any dependency on the type system.
Drive-by-fix: Properly print the type parameter to a TypeGuard operator.
BUG=chromium:612142
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1994503002
Cr-Commit-Position: refs/heads/master@{#36304}
This adds back the instanceof operator support in the backends and
introduces a @@hasInstance protector cell on the isolate that guards the
fast path for the InstanceOfStub. This way we recover the ~10%
regression on Octane EarleyBoyer in Crankshaft and greatly improve
TurboFan and Ignition performance of instanceof.
R=ishell@chromium.orgTBR=hpayer@chromium.org,rossberg@chromium.org
BUG=chromium:597249, v8:4447
LOG=n
Review-Url: https://codereview.chromium.org/1980483003
Cr-Commit-Position: refs/heads/master@{#36275}
This patch adds support for the `Operand2_R_LSL_I` addressing mode to
loads and stores. This allows merging a shift instruction into a
MemoryOperand. Since the shift immediate is restricted to the log2 of
the operation width, the opportunities to hit this are slim. However,
Ignition's bytecode handlers hit this case all the time:
kind = BYTECODE_HANDLER
name = Star
compiler = turbofan
Instructions (size = 44)
0x23e67280 0 add x1, x19, #0x1 (1)
0x23e67284 4 ldrsb x1, [x20, x1]
0x23e67288 8 sxtw x1, w1
0x23e6728c 12 mov x2, fp
0x23e67290 16 str x0, [x2, x1, lsl #3]
^^^^^^^^^^^^^^^^^^^^^
0x23e67294 20 add x19, x19, #0x2 (2)
0x23e67298 24 ldrb w1, [x20, x19]
0x23e6729c 28 ldr x1, [x21, x1, lsl #3]
^^^^^^^^^^^^^^^^^^^^^
0x23e672a0 32 br x1
Additionally, I noticed the optimisation occurs once in both the
`StringPrototypeCharAt` and `StringPrototypeCharCodeAt` turbofan stubs.
BUG=
Review-Url: https://codereview.chromium.org/1972103002
Cr-Commit-Position: refs/heads/master@{#36227}
We eagerly inserted Int32Mul for Math.imul during builtin lowering and
messed up with the types, which confused the representation selection.
This adds a proper NumberImul operator, and fixes the builtin reducer to
do the right thing according to the spec.
R=mstarzinger@chromium.org
BUG=v8:5006
LOG=n
Review-Url: https://codereview.chromium.org/1971163002
Cr-Commit-Position: refs/heads/master@{#36219}
Up until now we had two places where we did the function prototype
folding, once in the Typer and once in JSTypedLowering. Put this logic
into JSNativeContextSpecialization instead.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1965293002
Cr-Commit-Position: refs/heads/master@{#36157}
Make JSCreateArguments eliminatable, and remove the need for frame
states on JSCreateArguments nodes being lowered to (optimized) stub
calls. Only the runtime fallback needs a frame state, because in that
case we need to ask the deoptimizer for arguments to inlined functions.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1965013005
Cr-Commit-Position: refs/heads/master@{#36154}
This adds a new pass MemoryOptimizer that walks over the effect chain
from Start and lowers all Allocate, LoadField, StoreField, LoadElement,
and StoreElement nodes, trying to fold allocations into allocation
groups and eliminate write barriers on StoreField and StoreElement if
possible (i.e. if the object belongs to the current allocation group and
that group allocates in new space).
R=hpayer@chromium.org, jarin@chromium.org
BUG=v8:4931, chromium:580959
LOG=n
Review-Url: https://codereview.chromium.org/1963583004
Cr-Commit-Position: refs/heads/master@{#36128}
This operator was initially designed to handle arbitrary effect merging
for effect relaxation, but we don't do that (at least currently). So no
need to keep the dead operator around.
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/1954983002
Cr-Commit-Position: refs/heads/master@{#36063}
A load instruction will implicitely clear the top 32 bits when writing to a W
register. This patch avoids generating a `mov` instruction to zero-extend the
result in this case.
For example, this occurs in the generated code for dispatching to the next
bytecode in the interpreter:
kind = BYTECODE_HANDLER
name = LdaZero
compiler = turbofan
Instructions (size = 36)
0x32e64c60 0 add x19, x19, #0x1 (1)
0x32e64c64 4 ldrb w0, [x20, x19]
0x32e64c68 8 mov w0, w0
^^^^^^^^^^
0x32e64c6c 12 lsl x0, x0, #3
0x32e64c70 16 ldr x1, [x21, x0]
0x32e64c74 20 movz x0, #0x0
0x32e64c78 24 br x1
BUG=
Review-Url: https://codereview.chromium.org/1950013003
Cr-Commit-Position: refs/heads/master@{#36038}
Now that everything is properly wired to the effect chain when we get to
ChangeLowering, we can safely inline the allocation fast path and only
need to consule the slow path stub fallback when bump pointer allocation
fails.
R=jarin@chromium.org
BUG=v8:4931
LOG=n
Review-Url: https://codereview.chromium.org/1951853002
Cr-Commit-Position: refs/heads/master@{#36022}
When storing an immediate integer or floating point zero, use the zero register
as the source value. This avoids the need to sometimes allocate a new register.
BUG=
Review-Url: https://codereview.chromium.org/1945783002
Cr-Commit-Position: refs/heads/master@{#36013}
Now ChangeLowering is only concerned with lowering memory access and
allocation operations, and all changes are consistently lowered during
the effect/control linearization pass. The next step is to move the
left over lowerings to a pass dedicated to eliminate redundant loads and
stores, eliminate write barriers, fold and inline allocations.
Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
ChangeInt31ToTaggedSigned for consistency.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
Committed: https://crrev.com/ceca5ae308bddda166651c654f96d71d74f617d0
Cr-Commit-Position: refs/heads/master@{#35924}
Review-Url: https://codereview.chromium.org/1941673002
Cr-Commit-Position: refs/heads/master@{#35929}
Reason for revert:
[Sheriff] Breaks mac gc stress:
https://build.chromium.org/p/client.v8/builders/V8%20Mac%20GC%20Stress/builds/5821
Original issue's description:
> [turbofan] Remove left-over change bits from ChangeLowering.
>
> Now ChangeLowering is only concerned with lowering memory access and
> allocation operations, and all changes are consistently lowered during
> the effect/control linearization pass. The next step is to move the
> left over lowerings to a pass dedicated to eliminate redundant loads and
> stores, eliminate write barriers, fold and inline allocations.
>
> Also remove the atomic regions now that we wire everything into the
> effect chain properly. This is an important step towards allocation
> inlining.
>
> Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
> ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
> ChangeInt31ToTaggedSigned for consistency.
>
> CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
>
> Committed: https://crrev.com/ceca5ae308bddda166651c654f96d71d74f617d0
> Cr-Commit-Position: refs/heads/master@{#35924}
TBR=ishell@chromium.org,bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/1942733002
Cr-Commit-Position: refs/heads/master@{#35927}
Now ChangeLowering is only concerned with lowering memory access and
allocation operations, and all changes are consistently lowered during
the effect/control linearization pass. The next step is to move the
left over lowerings to a pass dedicated to eliminate redundant loads and
stores, eliminate write barriers, fold and inline allocations.
Also remove the atomic regions now that we wire everything into the
effect chain properly. This is an important step towards allocation
inlining.
Drive-by-fix: Rename ChangeBitToBool to ChangeBitToTagged,
ChangeBoolToBit to ChangeTaggedToBit, and ChangeInt31ToTagged to
ChangeInt31ToTaggedSigned for consistency.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
Review-Url: https://codereview.chromium.org/1941673002
Cr-Commit-Position: refs/heads/master@{#35924}
These also lower to subgraphs that have to be connected to the effect
and control chains, otherwise removing the atomic regions around heap
allocations would still be unsound.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1916763003
Cr-Commit-Position: refs/heads/master@{#35762}
This allows us to get rid of the "push TruncateFloat64ToInt32 into Phi"
trick that was used in the MachineOperatorReducer to combine the
ChangeTaggedToFloat64 and TruncateFloat64ToInt32 operations. Instead of
doing that later, we can just introduce the proper operator during the
representation selection directly.
Also separate the TruncateFloat64ToInt32 machine operator, which had two
different meanings depending on a flag (either JavaScript truncation or
C++ style round to zero). Now there's a TruncateFloat64ToWord32 which
represents the JavaScript truncation (implemented via TruncateDoubleToI
macro + code stub) and the RoundFloat64ToInt32, which implements the C++
round towards zero operation (in the same style as the other WebAssembly
driven Round* machine operators).
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1919513002
Cr-Commit-Position: refs/heads/master@{#35743}
Get rid of further typing checks from ChangeLowering and put them into
the representation selection pass instead (encoding the information in
the operator instead).
Drive-by-change: Rename ChangeSmiToInt32 to ChangeTaggedSignedToInt32
for consistency about naming Tagged, TaggedSigned and TaggedPointer.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1909343002
Cr-Commit-Position: refs/heads/master@{#35723}
If we have to convert a float64 value to tagged representation and we
already know that the value is either in Signed31/Signed32 or
Unsigned32 range, then we can just convert the float64 to word32 and
use the fast word32 to tagged conversion. Doing this in
ChangeLowering (or the effect linearization pass) would be unsound, as
the types on the nodes are no longer usable.
This removes all Type uses from effect linearization. There's still some
work to be done for ChangeLowering tho.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1908093002
Cr-Commit-Position: refs/heads/master@{#35713}
Removes the register file machine register from the interpreter and
replaces it will loads from the parent frame pointer. As part of this
change the raw operand values for register values changes to enable the
interpreter to keep using the operand value as the offset from the
parent frame pointer.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1894063002
Cr-Commit-Position: refs/heads/master@{#35618}
This introduces a compiler pass that schedules the graph and re-wires effect chain according to the schedule. It also connects allocating representation changes to the effect chain, and removes the BeginRegion and EndRegion nodes - they should not be needed anymore because all effectful nodes should be already wired-in.
This is an intermediate CL - the next step is to move lowering of the Change*ToTaggedEffect nodes to StateEffectIntroduction so that we do not have to introduce the effectful versions of nodes.
Review URL: https://codereview.chromium.org/1849603002
Cr-Commit-Position: refs/heads/master@{#35565}
These operators are really pure on the JavaScript level, and were only
part of the effect chain to make sure we don't accidentially schedule
them right after raw allocations, which is no longer an issue since we
now have the concept of atomic regions.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1893543004
Cr-Commit-Position: refs/heads/master@{#35552}
This changes closure creation to lower to inline allocations when
possible instead of going through the FastNewClosureStub. It allows us
to leverage all advantages of inline allocations on closures. Note that
it is only safe to embed the raw entry point of the compile lazy stub
into the code, because that stub is immortal and immovable.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1573153002
Cr-Commit-Position: refs/heads/master@{#35499}
This allows us to remove the turbofan bailout that we introduced
as a response to crbug.com/589792.
BUG=chromium:589792
LOG=n
Review URL: https://codereview.chromium.org/1884713003
Cr-Commit-Position: refs/heads/master@{#35493}
At some point we thought about using this instead of JSToNumber, but now
there doesn't seem to be any reason for this anymore.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1890763002
Cr-Commit-Position: refs/heads/master@{#35469}
In simplified numbering, we make sanity checks based on types (e.g.,
NumberSubtract should take numbers as inputs), but this can be
violated if optimization passes make types less precise.
In this CL, we fix load elimination to make sure that types are
smaller in the store -> load elimination by taking an intersection
of the load's type with the store value's type and inserting a guard
with that type. Note that the load type comes from type feedback, so
it can be disjoint from the stored value type (in that case, this
must be dead code because the map chack for the load should prevent
us from using the stored value).
BUG=chromium:599412
LOG=n
Review URL: https://codereview.chromium.org/1857133003
Cr-Commit-Position: refs/heads/master@{#35259}
The background here is that graphs generated from WASM are not trimmed.
That means there can be some floating control diamonds that are not
reachable from end. An assertion in the scheduler for phis from floating
diamonds checks that the use edge in this situation is the control edge,
but in general, any edge could cause this.
Scheduling still works without this assertion. The longer term fix
is to either trim the graphs (more compile time overhead for WASM)
or improve the scheduler's handling of dead code in the graph. Currently
it does not schedule dead code but the potential use positions of
dead code are used in the computation of the common dominator of uses. We could
recognize dead nodes in PrepareUses() and check in GetBlockForUse()
as per TODO.
R=bradnelson@chromium.org, mstarzinger@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1846933002
Cr-Commit-Position: refs/heads/master@{#35245}
This allows us to remove the troublesome %_MathClz32 intrinsic and also
allows us to utilize the functionality that is already available in
TurboFan. Also introduce a proper NumberClz32 operator so we don't need
to introduce a machine operator at the JS level.
R=epertoso@chromium.org
Review URL: https://codereview.chromium.org/1852553003
Cr-Commit-Position: refs/heads/master@{#35208}
We expect that the majority of malloc'd memory held by V8 is allocated
in Zone objects. Introduce an Allocator class that is used by Zones to
manage memory, and allows for querying the current usage.
BUG=none
R=titzer@chromium.org,bmeurer@chromium.org,jarin@chromium.org
LOG=n
TBR=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1847543002
Cr-Commit-Position: refs/heads/master@{#35196}
Int64Mul is lowered to a new turbofan operator, Int32MulPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the multiplication.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1807273002
Cr-Commit-Position: refs/heads/master@{#35131}
The new implementation deals with cycles in the TF graph in two steps:
1) The lowering of phis is delayed to avoid cyclic dependencies.
2) The replacement nodes of phis are created already when the phi is
pushed onto the stack so that other nodes can use these replacements
for their lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1844553002
Cr-Commit-Position: refs/heads/master@{#35126}
This way we avoid the second deoptimization for the Math.floor and
Math.ceil builtins when -0 is involved. We still deoptimize the inlined
Crankshaft version in various cases, that's a separate issue.
The algorithm used for implement CodeStubAssembler::Float64Floor is
vaguely based on the fast math version used in the libm of various BSDs,
but had to be reengineered to match the EcmaScript specification.
R=epertoso@chromium.org
BUG=v8:2890, v8:4059
LOG=n
Review URL: https://codereview.chromium.org/1828253002
Cr-Commit-Position: refs/heads/master@{#35083}
This CL adds support for builtins with JavaScript linkage written using
the TurboFan CodeStubAssembler, but with a JSCall descriptor (which was
already supported thanks to a previous patch by Ben Smith). As a first
example, we convert the Math.sqrt builtin and thereby get rid of the
%_MathSqrt intrinsic, which causes trouble for the representation
selection pass in the JavaScript pipeline.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1824993002
Cr-Commit-Position: refs/heads/master@{#34989}
The CL also add guard nodes to places where we assume that certain
values are numbers.
Review URL: https://codereview.chromium.org/1821133002
Cr-Commit-Position: refs/heads/master@{#34977}
This new intrinsic is used by the desugared ES6 instanceof implementation for
the cases when the F[@@hasInstance] property is null or undefined.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1809993002
Cr-Commit-Position: refs/heads/master@{#34866}
Int64Sub is lowered to a new turbofan operator, Int32SubPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the subtraction.
The implementation is very similar to the implementation of Int64Add.
@v8-arm-ports: please take a careful look at the implementation of sbc
in the simulator.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778893005
Cr-Commit-Position: refs/heads/master@{#34808}
Word64Popcnt is lowered to Word32Popcnt(low-word) + Word32Popcnt(high_word).
Since the optional Word64Popcnt operator does not exist on 32 bit platforms,
I introduced a new operator "Word64PopcntPlaceholder" which is generated
in the WasmCompiler and then lowered in the Int64Lowering.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1803453003
Cr-Commit-Position: refs/heads/master@{#34777}
Int64Add is lowered to a new turbofan operator, Int32AddPair. The new
operator takes 4 inputs an generates 2 outputs. The inputs are the low
word of the left input, high word of the left input, the low word of the
right input, and high word of the right input. The ouputs are the low
and high word of the result of the addition.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1778493004
Cr-Commit-Position: refs/heads/master@{#34747}
I64Shl is lowered to a new turbofan operator, WasmWord64Shl. The new
operator takes 3 inputs, the low-word input, the high-word input, and
the shift, and produces 2 output, the low-word output and the high-word
output.
At the moment I implemented the lowering only for ia32, but I think the
CL is already big enough. I will add the other platforms in separate
CLs.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1756863002
Cr-Commit-Position: refs/heads/master@{#34546}
Reason for revert:
Tanks benchmarks (e.g., Octane box2d TF).
Original issue's description:
> [turbofan] Connect ObjectIsNumber to effect and control chains.
>
> In theory, we could connect the nodes when doing
> the schedule-in-the-middle pass, but that would require creating two
> versions of the operator (effectful and pure). I believe we do not
> lose anything by wiring the node up eagerly.
>
> Committed: https://crrev.com/2894e80a0a4a51a0d72e72aa48fcd01968f7949f
> Cr-Commit-Position: refs/heads/master@{#34141}
TBR=bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1718483002
Cr-Commit-Position: refs/heads/master@{#34147}
In theory, we could connect the nodes when doing
the schedule-in-the-middle pass, but that would require creating two
versions of the operator (effectful and pure). I believe we do not
lose anything by wiring the node up eagerly.
Review URL: https://codereview.chromium.org/1709093002
Cr-Commit-Position: refs/heads/master@{#34141}
This reducer doesn't really add value, because:
(a) it is only concerned with JSCallFunction and JSToNumber, but when
we get to it, all JSCallFunction nodes will have been replaced by
Call nodes, and in the not so far future, we will also have
replaced almost all JSToNumber nodes with better code,
(b) and the reducer tries to be smart and use one of the outermost
contexts, but that might not be beneficial always; actually it
might even create longer live ranges and lead to more spilling
in some cases.
But most importantly, the JSContextRelaxation currently blocks inlining
based on SharedFunctionInfo, because it requires the inliner to check
the native context, which in turn requires JSFunction knowledge. So I'm
removing this reducer for now to unblock the more important inliner
changes.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1715633002
Cr-Commit-Position: refs/heads/master@{#34139}
This removes the language mode parameter from all JSCall operators. The
information is no longer used anywhere and is not threaded through the
interpreter bytecode. We should only thread it through the bytecode if
it has a semantic impact on the compilation.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1709493002
Cr-Commit-Position: refs/heads/master@{#34073}
Drive-by-fix: Remove the (now) unused %_SetValueOf and %_JSValueGetValue
intrinsics from the various compilers and the runtime.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1698343002
Cr-Commit-Position: refs/heads/master@{#34037}
Support SBFX in the instruction selector for sign-extension patterns like
Sar(Shl(x, a), b), where a and b are immediate values.
BUG=
Review URL: https://codereview.chromium.org/1695293002
Cr-Commit-Position: refs/heads/master@{#34029}
Passing floating point params to/from C has never quite worked correctly,
but we've never enforced the restriction early in the CallDescriptor
creation process because of unittests. Fix unittests to make their own
simple call descriptors and not rely on the C ones.
R=bmeurer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1701593003
Cr-Commit-Position: refs/heads/master@{#33993}
Improve instruction selector for mask and shift operations by using cheaper
instructions where possible, in preference to UBFX.
Reverted because it was suspected of causing a couple of flaky tests to fail,
but investigation suggests this is unlikely.
Original review: https://codereview.chromium.org/1677023002
BUG=
Review URL: https://codereview.chromium.org/1684073006
Cr-Commit-Position: refs/heads/master@{#33988}
This adds initial support for inline allocation of object and array
literals to the JSCreateLowering pass. It's basically identical to
what Crankshaft does.
This also unstages the TurboFan escape analysis, as the lowering seems
to trigger a bunch of bugs in it; those bugs will be fixed separately,
and we will re-enable escape analysis afterwards.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1698783002
Cr-Commit-Position: refs/heads/master@{#33972}
This was causing code like:
REX.W cmpq r9,r8
setzl r8l
movzxbl r8,r8
REX.W cmpq r8,0x0
jz 185
(note the cmpq instead of cmpl above) on x64 instead of:
REX.W cmpq r9,r8
jnz 149
http://crrev.com/1677503002 is now obsolete and has been reverted.
Review URL: https://codereview.chromium.org/1685183003
Cr-Commit-Position: refs/heads/master@{#33934}
The FastNewStrictArgumentsStub is very similar to the recently added
FastNewRestParameterStub, it's actually almost a copy of it, except that
it doesn't have the fast case we have for the empty rest parameter. This
patch improves strict arguments in TurboFan and fullcodegen by up to 10x
compared to the previous version.
Also introduce proper JSSloppyArgumentsObject and JSStrictArgumentsObject
for the in-object properties instead of having them as constants in the
Heap class.
Drive-by-fix: Use this stub and the FastNewRestParameterStub in the
interpreter to avoid the runtime call overhead for strict arguments
and rest parameter creation.
R=jarin@chromium.orgTBR=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1693513002
Cr-Commit-Position: refs/heads/master@{#33925}
Moves InterpreterAssembler out of the compiler directory and into the
interpreter directory. Makes InterpreterAssembler as subclass of
CodeStubAssembler.
As part of this change, the special bytecode dispatch linkage type
is removed and instead we use a InterfaceDispatchDescriptor and
a normal CodeStub linkage type.
Removes a bunch of duplicated logic in InterpreterAssembler and
instead uses the CodeStubAssembler logic. Refactors Interpreter
with these changes.
Modifies CodeStubAssembler to add the extra operations required
by the Interpreter (extra call types, raw memory access and some extra
binary ops). Also adds the ability for subclasses to add extra
prologue and epilogue operations around calls, which is required
for the Interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1673333004
Cr-Commit-Position: refs/heads/master@{#33873}
Reason for revert:
Possibly causing Mozilla test failures - will investigate.
Original issue's description:
> [turbofan] ARM: Improve AND instruction selection
>
> Improve instruction selector for mask and shift operations by using cheaper
> instructions where possible, in preference to UBFX.
>
> BUG=
>
> Committed: https://crrev.com/53d9c12977f07f55b6f2a72128b8d02c4c857845
> Cr-Commit-Position: refs/heads/master@{#33843}
TBR=bmeurer@chromium.org,jarin@chromium.org,danno@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1681953003
Cr-Commit-Position: refs/heads/master@{#33850}
Improve instruction selector for mask and shift operations by using cheaper
instructions where possible, in preference to UBFX.
BUG=
Review URL: https://codereview.chromium.org/1677023002
Cr-Commit-Position: refs/heads/master@{#33843}
This moves the JSCreate related functionality from JSTypedLowering into
a dedicated JSCreateLowering reducer. This is in preparation of landing
the support for optimized literals in TurboFan, which would blow up
JSTypedLowering quite seriously otherwise.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1678833002
Cr-Commit-Position: refs/heads/master@{#33813}
Replace the somewhat awkward RestParamAccessStub, which would always
call into the runtime anyway with a proper FastNewRestParameterStub,
which is basically based on the code that was already there for strict
arguments object materialization. But for rest parameters we could
optimize even further (leading to 8-10x improvements for functions with
rest parameters), by fixing the internal formal parameter count:
Every SharedFunctionInfo has a formal_parameter_count field, which
specifies the number of formal parameters, and is used to decide whether
we need to create an arguments adaptor frame when calling a function
(i.e. if there's a mismatch between the actual and expected parameters).
Previously the formal_parameter_count included the rest parameter, which
was sort of unfortunate, as that meant that calling a function with only
the non-rest parameters still required an arguments adaptor (plus some
other oddities). Now with this CL we fix, so that we do no longer
include the rest parameter in that count. Thereby checking for rest
parameters is very efficient, as we only need to check whether there is
an arguments adaptor frame, and if not create an empty array, otherwise
check whether the arguments adaptor frame has more parameters than
specified by the formal_parameter_count.
The FastNewRestParameterStub is written in a way that it can be directly
used by Ignition as well, and with some tweaks to the TurboFan backends
and the CodeStubAssembler, we should be able to rewrite it as
TurboFanCodeStub in the near future.
Drive-by-fix: Refactor and unify the CreateArgumentsType which was
different in TurboFan and Ignition; now we have a single enum class
which is used in both TurboFan and Ignition.
R=jarin@chromium.org, rmcilroy@chromium.orgTBR=rossberg@chromium.org
BUG=v8:2159
LOG=n
Review URL: https://codereview.chromium.org/1676883002
Cr-Commit-Position: refs/heads/master@{#33809}
Reason for revert:
Must revert for now due to chromium api natives issues.
Original issue's description:
> Type Feedback Vector lives in the closure
>
> (RELAND: the problem before was a missing write barrier for adding the code
> entry to the new closure. It's been addressed with a new macro instruction
> and test. The only change to this CL is the addition of two calls to
> __ RecordWriteCodeEntryField() in the platform CompileLazy builtin.)
>
> We get less "pollution" of type feedback if we have one vector per native
> context, rather than one for the whole system. This CL moves the vector
> appropriately.
>
> We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
> vector actually lives in the first slot of the literals array (indeed there is
> great commonality between those arrays, they can be thought of as the same
> thing). So we make greater effort to ensure there is a valid literals array
> after compilation.
>
> This meant, for performance reasons, that we needed to extend
> FastNewClosureStub to support creating closures with literals. And ultimately,
> it drove us to move the optimized code map lookup out of FastNewClosureStub
> and into the compile lazy builtin.
>
> The heap change is trivial so I TBR Hannes for it...
> Also, Yang has had a look at the debugger changes already and approved 'em. So he is TBR style too.
> And Benedikt reviewed it as well.
>
> TBR=hpayer@chromium.org, yangguo@chromium.org, bmeurer@chromium.org
>
> BUG=
>
> Committed: https://crrev.com/bb31db3ad6de16f86a61f6c7bbfd3274e3d957b5
> Cr-Commit-Position: refs/heads/master@{#33741}
TBR=bmeurer@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1670813005
Cr-Commit-Position: refs/heads/master@{#33766}
(RELAND: the problem before was a missing write barrier for adding the code
entry to the new closure. It's been addressed with a new macro instruction
and test. The only change to this CL is the addition of two calls to
__ RecordWriteCodeEntryField() in the platform CompileLazy builtin.)
We get less "pollution" of type feedback if we have one vector per native
context, rather than one for the whole system. This CL moves the vector
appropriately.
We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
vector actually lives in the first slot of the literals array (indeed there is
great commonality between those arrays, they can be thought of as the same
thing). So we make greater effort to ensure there is a valid literals array
after compilation.
This meant, for performance reasons, that we needed to extend
FastNewClosureStub to support creating closures with literals. And ultimately,
it drove us to move the optimized code map lookup out of FastNewClosureStub
and into the compile lazy builtin.
The heap change is trivial so I TBR Hannes for it...
Also, Yang has had a look at the debugger changes already and approved 'em. So he is TBR style too.
And Benedikt reviewed it as well.
TBR=hpayer@chromium.org, yangguo@chromium.org, bmeurer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1668103002
Cr-Commit-Position: refs/heads/master@{#33741}
So far, we've been moving down gaps wholesale. This change moves
individual move operations instead. This improves some benchmarks,
and should overall reduce code size, because it improves the chance of
reducing the number of moves.
For example, there are improvements on x64 in Emscripten (Bullet, in
particular) , JetStream geomean, Embenchen (zlib).
In the process of making this change, I noticed we can separate the
tasks performed by the move optimizer, as follows:
- group gaps into 1
- push gaps down, jumping instructions (these 2 were together before)
- merge blocks (and then push gaps down)
- finalize
We can do without a finalization list. This avoids duplicating storage -
we already have the list of instructions; it also simplifies the logic, since,
with this change, we may process an instruction's gap twice.
Compile time doesn't regress much (see pathological cases), but we
may want to avoid the allocations of the few sets used in the new code.
I'll do that in a subsequent change.
BUG=
Review URL: https://codereview.chromium.org/1634093002
Cr-Commit-Position: refs/heads/master@{#33715}
Move all the code that deals with falling back to object creation via
stubs to JSGenericLowering, where we can already deal well with stub
calls. This includes JSCreateLiteralArray, JSCreateLiteralObject,
JSCreateClosure, JSCreateFunctionContext and JSCreateArray.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1653353002
Cr-Commit-Position: refs/heads/master@{#33682}
Avoid the hacking in JSIntrinsicLowering and provide a proper simplified
operator ObjectIsReceiver instead that is used to implement %_IsJSReceiver
which is used by our JavaScript builtins and the JSInliner.
R=jarin@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1657863004
Cr-Commit-Position: refs/heads/master@{#33675}
There's no point in having %_IsFunction as inline intrinsic, as it
is only used in non performance critical code, which is already full
of runtime calls anyway, so %IsFunction will do the trick as well.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1658123002
Cr-Commit-Position: refs/heads/master@{#33660}
This CL removes the Config templatization from the types. It is not
necessary anymore, after the HeapTypes have been removed.
The CL also changes the type hierarchy - the specific type kinds are
not inner classes of the Type class and they do not inherit from Type.
This is partly because it seems impossible to make this work without
templates. Instead, a new TypeBase class is introduced and all the
structural (i.e., non-bitset) types inherit from it.
The bitset type still requires the bit-munging hack and some nasty
reinterpret-casts to pretend bitsets are of type Type*. Additionally,
there is now the same hack for TypeBase - all pointers to the sub-types
of TypeBase are reinterpret-casted to Type*. This is to keep the type
constructors in inline method definitions (although it is unclear how
much that actually buys us).
In future, we would like to move to a model where we encapsulate Type*
into a class (or possibly use Type where we used to use Type*). This
would loosen the coupling between bitset size and pointer size, and
eventually we would be able to have more bits.
TBR=bradnelson@chromium.org
Review URL: https://codereview.chromium.org/1655833002
Cr-Commit-Position: refs/heads/master@{#33656}
Reason for revert:
problems on Mac64
Original issue's description:
> [turbofan] Add the StackSlot operator to turbofan.
>
> The StackSlot operator allows to allocate a spill slot on the stack. We
> are going to use this operator to pass floats through pointers to c
> functions, which we need for floating point rounding in the case where
> the architecture does not provide rounding instructions.
>
> R=titzer@chromium.org, v8-arm-ports@googlegroups.com, v8-ppc-ports@googlegroups.com, v8-mips-ports@googlegroups.com
>
> Committed: https://crrev.com/7a693437787090d62d937b862e29521debcc5223
> Cr-Commit-Position: refs/heads/master@{#33600}
TBR=titzer@chromium.org,v8-arm-ports@googlegroups.com,v8-mips-ports@googlegroups.com,v8-ppc-ports@googlegroups.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1644283002
Cr-Commit-Position: refs/heads/master@{#33601}
Reason for revert:
Bug: failing to use write barrier when writing code entry into closure.
Original issue's description:
> Reland of Type Feedback Vector lives in the closure
>
> (Fixed a bug found by nosnap builds.)
>
> We get less "pollution" of type feedback if we have one vector per native
> context, rather than one for the whole system. This CL moves the vector
> appropriately.
>
> We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
> vector actually lives in the first slot of the literals array (indeed there is
> great commonality between those arrays, they can be thought of as the same
> thing). So we make greater effort to ensure there is a valid literals array
> after compilation.
>
> This meant, for performance reasons, that we needed to extend
> FastNewClosureStub to support creating closures with literals. And ultimately,
> it drove us to move the optimized code map lookup out of FastNewClosureStub
> and into the compile lazy builtin.
>
> The heap change is trivial so I TBR Hannes for it...
>
> TBR=hpayer@chromium.org
> BUG=
>
> Committed: https://crrev.com/d984b3b0ce91e55800f5323b4bb32a06f8a5aab1
> Cr-Commit-Position: refs/heads/master@{#33548}
TBR=bmeurer@chromium.org,yangguo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1643533003
Cr-Commit-Position: refs/heads/master@{#33556}
(Fixed a bug found by nosnap builds.)
We get less "pollution" of type feedback if we have one vector per native
context, rather than one for the whole system. This CL moves the vector
appropriately.
We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
vector actually lives in the first slot of the literals array (indeed there is
great commonality between those arrays, they can be thought of as the same
thing). So we make greater effort to ensure there is a valid literals array
after compilation.
This meant, for performance reasons, that we needed to extend
FastNewClosureStub to support creating closures with literals. And ultimately,
it drove us to move the optimized code map lookup out of FastNewClosureStub
and into the compile lazy builtin.
The heap change is trivial so I TBR Hannes for it...
TBR=hpayer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1642613002
Cr-Commit-Position: refs/heads/master@{#33548}
Introduces the concept of transfer direction to register operands. This
enables the register translator to emit exactly the moves that a
bytecode having it's register operands translated needs.
BUG=v8:4280,v8:4675
LOG=N
Review URL: https://codereview.chromium.org/1633153002
Cr-Commit-Position: refs/heads/master@{#33544}
Reason for revert:
FAilure on win32 bot, need to investigate webkit failures.
Original issue's description:
> Type Feedback Vector lives in the closure
>
> We get less "pollution" of type feedback if we have one vector per native
> context, rather than one for the whole system. This CL moves the vector
> appropriately.
>
> We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
> vector actually lives in the first slot of the literals array (indeed there is
> great commonality between those arrays, they can be thought of as the same
> thing). So we make greater effort to ensure there is a valid literals array
> after compilation.
>
> This meant, for performance reasons, that we needed to extend
> FastNewClosureStub to support creating closures with literals. And ultimately,
> it drove us to move the optimized code map lookup out of FastNewClosureStub
> and into the compile lazy builtin.
>
> The heap change is trivial so I TBR Hannes for it...
>
> TBR=hpayer@chromium.org
>
> BUG=
>
> Committed: https://crrev.com/a5200f7ed4d11c6b882fa667da7a1864226544b4
> Cr-Commit-Position: refs/heads/master@{#33518}
TBR=bmeurer@chromium.org,akos.palfi@imgtec.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1632993003
Cr-Commit-Position: refs/heads/master@{#33520}
We get less "pollution" of type feedback if we have one vector per native
context, rather than one for the whole system. This CL moves the vector
appropriately.
We rely more heavily on the Optimized Code Map in the SharedFunctionInfo. The
vector actually lives in the first slot of the literals array (indeed there is
great commonality between those arrays, they can be thought of as the same
thing). So we make greater effort to ensure there is a valid literals array
after compilation.
This meant, for performance reasons, that we needed to extend
FastNewClosureStub to support creating closures with literals. And ultimately,
it drove us to move the optimized code map lookup out of FastNewClosureStub
and into the compile lazy builtin.
The heap change is trivial so I TBR Hannes for it...
TBR=hpayer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1563213002
Cr-Commit-Position: refs/heads/master@{#33518}
* Add caching to handling of dangling loads
* Add two unittests for load elimination on escaped objects
BUG=v8:4586
LOG=n
Review URL: https://codereview.chromium.org/1619103004
Cr-Commit-Position: refs/heads/master@{#33498}
moves, we move those to the node, and remove them from the
predecessors ("merge" them to the common node).
If only some of the moves are common, we don't do anything. This is
what this change addresses.
The bug linked below should be addressed by this change. The only
difference in codegen before/after the change that introduced the bug
was un-merged moves.
BUG=chromium:549262
LOG=N
Review URL: https://codereview.chromium.org/1527203002
Cr-Commit-Position: refs/heads/master@{#33481}
Change the interpreter to always store the current context in the frame's
context slot instead of the function context. This makes it possible to
restore the correct context during deopt.
BUG=v8:4678,v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1604923002
Cr-Commit-Position: refs/heads/master@{#33477}
* Treat Select nodes as escaping
* Correctly void virtual field information
after a store to a non-const index
* Add a shortcut if all allocates escape
* Add a shortcut if no allocates are discovered
* Only reduce FrameState/StateValues nodes if they
have virtual allocates as input (transitively)
* Fix bug in FrameState/StateValues duplication
* Add check to verifier: First 3 inputs of FrameState
must be StateValues
R=mstarzinger@chromium.org
BUG=v8:4586
LOG=n
Review URL: https://codereview.chromium.org/1583213003
Cr-Commit-Position: refs/heads/master@{#33406}
o Adds wide variants of bytecodes that have operands describing ranges
of registers. The upcoming wide register support does not suppport
re-mapping ranges.
o Adds kRegPair16 and kRegTriple16 operands required for new wide
bytecodes and renames Count8/Count16 operands to RegCount8/RegCount16.
o Removes Exchange bytecodes
BUG=v8:4675
LOG=NO
Review URL: https://codereview.chromium.org/1595103006
Cr-Commit-Position: refs/heads/master@{#33389}
Make ForInPrepare take a kRegTriple8 operand and ForInNext take kRegPair8
operand for cache state. This is to ensure that the cache state output of
ForInPrepare is in consecutive registers to allow us to deopt the
ForInPrepare node from TF->Ignition (to be done in a followup CL).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1584813002
Cr-Commit-Position: refs/heads/master@{#33357}
This bug improves performance of escape analysis.
* A allocation discovery phase (EscapeAnalysis::AssignAliases)
ensures compact representation of virtual state
* Node revisiting in EscapeStatusAnalysis has been improved
* Escape analysis no longer requires a trimmed graph
BUG=v8:4586
LOG=n
Review URL: https://codereview.chromium.org/1559123003
Cr-Commit-Position: refs/heads/master@{#33267}
Adds support for calling runtime functions which return a pair of
values. Adds the bytecode CallRuntimePair. Also adds support to TurboFan
for calling stubs which return multiple values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1568493002
Cr-Commit-Position: refs/heads/master@{#33181}
Deopt support is added on two levels. On the IR level,
a new ObjectState node is added, which represenents an
object to be materialized. ObjectState nodes appear as
inputs of FrameState and StateValues nodes. On the
instruction select/code-generation level, the
FrameStateDescriptor class handles the nesting
introduced by ObjectState, and ensures that deopt code
with CAPTURED_OBJECT/DUPLICATED_OBJECT entries are
generated similarly to what crankshaft's escape
analysis does.
Two unittests test correctness of the IR level implementation.
Correctness for instruction selection / code generation
is tested by mjsunit tests.
R=jarin@chromium.org,mstarzinger@chromium.org
BUG=v8:4586
LOG=n
Review URL: https://codereview.chromium.org/1485183002
Cr-Commit-Position: refs/heads/master@{#33115}
New bytecodes for making registers with indicies wider than 1-byte
accessible.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1555713002
Cr-Commit-Position: refs/heads/master@{#33091}
According to the ES2015 specification, bound functions are exotic
objects, and thus don't need to be implemented as JSFunctions. So
we introduce a new JSBoundFunction type to represent bound functions
and make them optimizable. This already improves the performance of
calling or constructing bound functions by 10-100x depending on the
use case because we avoid the crazy dance between JavaScript and C++
that was implemented in v8natives.js previously.
There's still room for improvement in the performance of actually
creating bound functions, which is also relevant in practice, but
we already have a plan how to accomplish that later.
The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
BUG=chromium:535408, chromium:571299, v8:4629
LOG=n
Committed: https://crrev.com/ca8623eaa468cba65a5adafcdfb4615966f43ce2
Cr-Commit-Position: refs/heads/master@{#33042}
Review URL: https://codereview.chromium.org/1542963002
Cr-Commit-Position: refs/heads/master@{#33044}
Reason for revert:
Breaks arm64 sim nosnap: https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20nosnap%20-%20debug/builds/805/steps/Check/logs/function-bind
Original issue's description:
> [runtime] Introduce dedicated JSBoundFunction to represent bound functions.
>
> According to the ES2015 specification, bound functions are exotic
> objects, and thus don't need to be implemented as JSFunctions. So
> we introduce a new JSBoundFunction type to represent bound functions
> and make them optimizable. This already improves the performance of
> calling or constructing bound functions by 10-100x depending on the
> use case because we avoid the crazy dance between JavaScript and C++
> that was implemented in v8natives.js previously.
>
> There's still room for improvement in the performance of actually
> creating bound functions, which is also relevant in practice, but
> we already have a plan how to accomplish that later.
>
> The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
>
> CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
> BUG=chromium:535408, chromium:571299, v8:4629
> LOG=n
>
> Committed: https://crrev.com/ca8623eaa468cba65a5adafcdfb4615966f43ce2
> Cr-Commit-Position: refs/heads/master@{#33042}
TBR=cbruni@chromium.org,hpayer@chromium.org,yangguo@chromium.org,akos.palfi@imgtec.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:535408, chromium:571299, v8:4629
Review URL: https://codereview.chromium.org/1552473002
Cr-Commit-Position: refs/heads/master@{#33043}
According to the ES2015 specification, bound functions are exotic
objects, and thus don't need to be implemented as JSFunctions. So
we introduce a new JSBoundFunction type to represent bound functions
and make them optimizable. This already improves the performance of
calling or constructing bound functions by 10-100x depending on the
use case because we avoid the crazy dance between JavaScript and C++
that was implemented in v8natives.js previously.
There's still room for improvement in the performance of actually
creating bound functions, which is also relevant in practice, but
we already have a plan how to accomplish that later.
The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
BUG=chromium:535408, chromium:571299, v8:4629
LOG=n
Review URL: https://codereview.chromium.org/1542963002
Cr-Commit-Position: refs/heads/master@{#33042}
Move replacements out of virtual object. Replacements are
global to the graph and are not dependent on the virtual
state (after they are discovered).
R=mstarzinger@chromium.org
BUG=v8:4586
LOG=n
Review URL: https://codereview.chromium.org/1527533002
Cr-Commit-Position: refs/heads/master@{#32838}
Removes the dummy control and effect edges from the RMA Call nodes. This
requires a change to the node matchers to allow them to cope with nodes
which don't have control or effect matchers.
Review URL: https://codereview.chromium.org/1518673002
Cr-Commit-Position: refs/heads/master@{#32752}
Nowadays, representation inference and simplified lowering can insert the
right truncations based on the use.
Review URL: https://codereview.chromium.org/1512243002
Cr-Commit-Position: refs/heads/master@{#32747}
MachineType is now a class with two enum fields:
- MachineRepresentation
- MachineSemantic
Both enums are usable on their own, and this change switches some places from using MachineType to use just MachineRepresentation. Most notably:
- register allocator now uses just the representation.
- Phi and Select nodes only refer to representations.
Review URL: https://codereview.chromium.org/1513543003
Cr-Commit-Position: refs/heads/master@{#32738}
Extract ToBoolean hints from the fullcodegen code object and put them
into the ToBoolean nodes created by the AstGraphBuilder. We currently
do not yet consume this feedback, that will be done in a followup CL.
R=mstarzinger@chromium.org
BUG=v8:4583
LOG=n
Review URL: https://codereview.chromium.org/1494973002
Cr-Commit-Position: refs/heads/master@{#32576}
