- Changes min and max sequences to propagate NaNs and signed
zeroes.
- Note that NaN propagation must preserve canonical NaNs. This is
achieved by always returning canonical NaNs. This is also
consistent with the WebAssembly scalar math spec.
Bug: v8:8639
Change-Id: I04fdefabc54ea60f4d02e2081c32444a02dd6a83
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1524634
Commit-Queue: Bill Budge <bbudge@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60414}
Most of the mjsunit/wasm/table-copy.js tests have been ported to
cctests, so they can be tested with all execution tiers.
Bug: v8:8965
Change-Id: I448719be30a4b2bddb9e2cffb4c74d3134db2f50
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1529548
Commit-Queue: Ben Smith <binji@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60396}
Said instructions look like ChangeTaggedXXXToCompressedXXX and
ChangeCompressedXXXToTaggedXXX for XXX in ("", "Pointer", "Signed").
This change only affects 64 bit architectures (both for x64 and arm64).
Also added tests for the machine operators.
Cq-Include-Trybots: luci.v8.try:v8_linux64_pointer_compression_rel_ng,v8_linux64_arm64_pointer_compression_rel_ng
Bug: v8:8977
Change-Id: I239d9de7f214424852e75b5d56996e8dfdacd400
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1526009
Commit-Queue: Santiago Aboy Solanes <solanes@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60393}
FixedArray object in LO space are processed incrementally in ranges of slots
size kProgressBarScanningChunk to reduce latency when returning to the
processing loop is critical. A progress bar stores how much slots have been
processed already.
In the case of regular concurrent marking there was a guarantee that the
object was only processed by one thread (main *or* concurrent marking
thread) at the same time.
However, some optimizations that avoid write barriers for each
individual write operation emit a batched write barrier that requires
re-visiting the FixedArray for the marking barrier. In such cases, the
progress bar would be reset using relaxed stores which is problematic as
the concurrent marking thread could race on setting its own progress on the
progress bar. As a result, the array would only be re-scanned partially.
The fix involves using CAS to set the progress bar and bail out in the
case an inconsistent state was observed.
In the following:
MT... main thread
CM... concurrent marking thread
The interesting cases are:
1. MT *or* CM processes the array without interfering: Progress bar is
updated monotonically without failing.
3. MT interferes with itself: The progress bar is just reset and the main
thread will restart scanning from index 0. The object is added twice to
the marking worklist and processed each time one of the entries is
retrieved from the worklist.
4. MT interferes with CM:
4.a.: CM processes a range of slots and re-adds the left overs by
setting the progress bar and re-adding the array to the worklist. In
this case CM *and* MT process the array from index 0. The first time
the CAS for setting the progress bar fails on either of the threads,
the looser will bail out and leave processing for the winner.
4.b.: CM is interrupted while processing a range of the array and
fails in setting the progress bar for the left overs. In this case
the CM bails out right away and the main thread starts processing
from index 0.
In addition, there is a transition from index 0 to the index of the
first actual slot. This transition makes it possible to observe a reset
while processing the first actual chunk of slots.
Bug: chromium:942699
Change-Id: I0b06f47ee075030dadfc959528cd77b6b69bbec2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1532325
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60385}
The reason for the revert was that Liftoff did not bail out on indirect
calls to tables other than table 0. Whenever the Liftoff code got
executed, the test would fail.
Original message:
With this CL it is possible to use any anyfunc table in call-indirect,
not just the first table.
The current implementation is based on runtime calls. This is just an
initial implementation which should be replaced by a
dispatch-table-based eventually. However, this implementation allows
us to move forward with the anyref proposal implementation.
R=mstarzinger@chromium.org
Bug: v8:7581
Change-Id: Iedd56ee7acb281441bca32ffd3dc7157203ee1ac
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1532072
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Auto-Submit: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60382}
When running wasm tests, the interpreter previously used a static
collection of function indexes stored in WasmTable to perform
call_indirect calls internal to that module. This has the wrong behavior
if the table is changed (via WasmTableObject::Set, `table.copy`, or
`table.init`).
This CL changes the cctests to always generate an intepreter entry for
all functions, and stores those entries in the dispatch table. This
allows us to use the same execution path as for non-testing code.
The interpreter entry compiler needed to be changed to support
multi-value returns too, since a 64-bit integer return value may be
lowered to two 32-bit integer returns.
Bug: v8:9016
Change-Id: I277df21ffde5c2eee0b691fcc9bab2b1a43eeffc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1531137
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60380}
This reverts commit 3cda21de77.
Reason for revert: Breaks the roll on Windows (see https://cr-buildbucket.appspot.com/build/8918477701097622400)
Original change's description:
> V8 x64 backend doesn't emit ABI compliant stack frames
>
> On 64 bit Windows, the OS stack walking does not work because the V8 x64
> backend doesn't emit unwinding info and also because it doesn't emit ABI
> compliant stack frames. See
> https://docs.google.com/document/d/1-wf50jFlii0c_Pr52lm2ZU-49m220nhYMrHDi3vXnh0/edit
> for more details.
>
> This problem can be fixed by observing that V8 frames usually all have the same
> prolog and epilog:
>
> push rbp,
> mov rbp, rsp
> ...
> pop rbp
> ret N
>
> and that it is possible to define XDATA (UNWIND_CODEs) that specify how Windows
> should walk through V8 frames. Furthermore, since V8 Code objects are all
> allocated in the same code-range for an Isolate, it is possible to register a
> single PDATA/XDATA entry to cover stack walking for all the code generated
> inside that code-range.
>
> This PR contains changes required to enable stack walking on Win64:
>
> EmbeddedFileWriter now adds assembler directives to the builtins
> snapshot source file (embedded.cc) to emit additional entries in the .pdata and
> in the .xdata section of the V8 executable. This takes care of stack walking
> for embedded builtins. (The case of non-embedded builtins is not supported).
> The x64 Assembler has been modified to collect the information required to emit
> this unwind info for builtins.
>
> Stack walking for jitted code is handled is Isolate.cpp, by registering
> dynamically PDATA/XDATA for the whole code-range address space every time a new
> Isolate is initialized, and by unregistering them when the Isolate is
> destroyed.
>
> Stack walking for WASM jitted code is handled is the same way in
> wasm::NativeModule (wasm/wasm-code-manager.cpp).
>
> It is important to note that Crashpad and Breakpad are already registering
> PDATA/XDATA to manage and report unhandled exceptions (but not for embedded
> builtins). Since it is not possible to register multiple PDATA entries for the
> same address range, a new function is added to the V8 API:
> SetUnhandledExceptionCallback() can be used by an embedder to register its own
> unhandled exception handler for exceptions that arise in v8-generated code.
> V8 embedders should be modified accordingly (code for this is in a separate PR
> in the Chromium repository:
> https://chromium-review.googlesource.com/c/chromium/src/+/1474703).
>
> All these changes are experimental, behind:
>
> the 'v8_win64_unwinding_info' build flag, and
> the '--win64-unwinding-info' runtime flag.
>
> Bug: v8:3598
> Change-Id: Iea455ab6d0e2bf1c556aa1cf870841d44ab6e4b1
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1469329
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Commit-Queue: Paolo Severini <paolosev@microsoft.com>
> Cr-Commit-Position: refs/heads/master@{#60330}
TBR=bbudge@chromium.org,ulan@chromium.org,mvstanton@chromium.org,mstarzinger@chromium.org,gdeepti@chromium.org,jgruber@chromium.org,paolosev@microsoft.com
Change-Id: If8470da94c58df8c800cbe8887f9f86236e43353
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:3598
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1532321
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60372}
This prepares a refactoring to add and publish compilation results in
batches. For this, we need to separate the two phases, so that we can
lock the module, allocate all the code space, release the lock, copy
the code, lock the module, publish the code, and release the lock
again.
In particular, this CL does the following:
1) It removes the {AddOwnedCode} method. The functionality of creating
the {WasmCode} and memcpy'ing the instruction into that is done in
the other {Add*Code} methods. Adding to {owned_code_} is done in
{PublishCode}.
2) {PublishInterpreterEntry} is now functionally equivalent to
{PublishCode}, so it's removed.
3) After {AddCode}, the caller has to call {PublishCode}. In a
follow-up CL, this will be called in batches (first {AddCode} them
all, then {PublishCode} them all).
4) {AddCompiledCode} now assumes that the {WasmCompilationResult}
succeeded. Otherwise, the caller should directly call {SetError} on
the {CompilationState}.
5) {PublishCode} is now the chokepoint for installing code to the code
table, the owned code vector, the jump table, and setting interpreter
redirections. It replaces previous direct calls to {InstallCode} or
explicitly adding to {owned_code_}.
6) Increasing the {generated_code_size_} counter is now done in
{AllocateForCode}, which is the chokepoint for allocating space for
generated code. This way, we will only increase this counter once
once we allocate in batches.
R=titzer@chromium.org
Bug: v8:8916
Change-Id: I71e02e3a838f21797915cee3ebd373804fb12237
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1530817
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60369}
This reverts commit 9d167f57e0.
Reason for revert: There is a crash on https://ci.chromium.org/p/v8/builders/ci/V8%20Win32/20026
Original change's description:
> [wasm][anyref] Add support of call-indirect for multiple tables
>
> With this CL it is possible to use any anyfunc table in call-indirect,
> not just the first table.
>
> The current implementation is based on runtime calls. This is just an
> initial implementation which should be replaced by a
> dispatch-table-based eventually. However, this implementation allows
> us to move forward with the anyref proposal implementation.
>
> R=mstarzinger@chromium.org
>
> Bug: v8:7581
> Change-Id: I57d09b18add7f525555bf7c949aef17a64b0e7c5
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1530801
> Commit-Queue: Andreas Haas <ahaas@chromium.org>
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#60360}
TBR=mstarzinger@chromium.org,ahaas@chromium.org
Change-Id: Iba4b84078aa070498be7e79212970b94595f5757
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7581
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1532069
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60362}
With this CL it is possible to use any anyfunc table in call-indirect,
not just the first table.
The current implementation is based on runtime calls. This is just an
initial implementation which should be replaced by a
dispatch-table-based eventually. However, this implementation allows
us to move forward with the anyref proposal implementation.
R=mstarzinger@chromium.org
Bug: v8:7581
Change-Id: I57d09b18add7f525555bf7c949aef17a64b0e7c5
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1530801
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60360}
This is a reland of f8962ae1a2
Original change's description:
> Preparing v8 to use with python3 /test
>
> There are now less that 400 days until the end of life
> of Python 2(aka _legacy_ Python) https://pythonclock.org/ .
> The code compatibility check for python2 and python3
> used the following tools: futurize, flake8
> You can see the reports here: https://travis-ci.com/bmsdave/v8/builds
>
> This CL was uploaded by git cl split.
>
> Bug: v8:8594
> Change-Id: Idbf467daf629a4e808345a6a88036c2a3f259138
> Reviewed-on: https://chromium-review.googlesource.com/c/1470121
> Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Reviewed-by: Sergiy Belozorov <sergiyb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59679}
Bug: v8:8594
Change-Id: I8c1a8d6593a4a927d56d37dada2c704062e842cc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1484300
Reviewed-by: Tamer Tas <tmrts@chromium.org>
Reviewed-by: Sergiy Belozorov <sergiyb@chromium.org>
Commit-Queue: Tamer Tas <tmrts@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60354}
Omit user roots when raw heap snapshots are used, i.e., when
the gn flag v8_enable_raw_heap_snapshots is enabled. For regular
Chrome production builds this is not the case.
Blink CL: https://crrev.com/c/1529096
Bug: chromium:936797
Change-Id: I5ae0ec1ecfab9a76352d8ce927d1c40e707262cc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1528994
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60351}
WasmRunner provides CheckCallViaJS, which calls a wasm function through
JS and checks its result.
There are currently two overloads, one that takes a variable number of
arguments, and another more general 4-argument version that takes an
array of arguments. This means if you run code like:
r.CheckCallViaJS(0, 0, 0, 0);
The overload resolution kicks in, and chooses the general version, which
will always segfault.
This CL renames the general version to `CheckCallApplyViaJS` so the
above example will call the variable-argument version instead.
Change-Id: I14a742c467692e09e84f03504cec2306a794fc24
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1529990
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Ben Smith <binji@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60345}
On 64 bit Windows, the OS stack walking does not work because the V8 x64
backend doesn't emit unwinding info and also because it doesn't emit ABI
compliant stack frames. See
https://docs.google.com/document/d/1-wf50jFlii0c_Pr52lm2ZU-49m220nhYMrHDi3vXnh0/edit
for more details.
This problem can be fixed by observing that V8 frames usually all have the same
prolog and epilog:
push rbp,
mov rbp, rsp
...
pop rbp
ret N
and that it is possible to define XDATA (UNWIND_CODEs) that specify how Windows
should walk through V8 frames. Furthermore, since V8 Code objects are all
allocated in the same code-range for an Isolate, it is possible to register a
single PDATA/XDATA entry to cover stack walking for all the code generated
inside that code-range.
This PR contains changes required to enable stack walking on Win64:
EmbeddedFileWriter now adds assembler directives to the builtins
snapshot source file (embedded.cc) to emit additional entries in the .pdata and
in the .xdata section of the V8 executable. This takes care of stack walking
for embedded builtins. (The case of non-embedded builtins is not supported).
The x64 Assembler has been modified to collect the information required to emit
this unwind info for builtins.
Stack walking for jitted code is handled is Isolate.cpp, by registering
dynamically PDATA/XDATA for the whole code-range address space every time a new
Isolate is initialized, and by unregistering them when the Isolate is
destroyed.
Stack walking for WASM jitted code is handled is the same way in
wasm::NativeModule (wasm/wasm-code-manager.cpp).
It is important to note that Crashpad and Breakpad are already registering
PDATA/XDATA to manage and report unhandled exceptions (but not for embedded
builtins). Since it is not possible to register multiple PDATA entries for the
same address range, a new function is added to the V8 API:
SetUnhandledExceptionCallback() can be used by an embedder to register its own
unhandled exception handler for exceptions that arise in v8-generated code.
V8 embedders should be modified accordingly (code for this is in a separate PR
in the Chromium repository:
https://chromium-review.googlesource.com/c/chromium/src/+/1474703).
All these changes are experimental, behind:
the 'v8_win64_unwinding_info' build flag, and
the '--win64-unwinding-info' runtime flag.
Bug: v8:3598
Change-Id: Iea455ab6d0e2bf1c556aa1cf870841d44ab6e4b1
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1469329
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Paolo Severini <paolosev@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#60330}
This makes it easier to publish them in batches. Function index and
requested compilation tier are duplicated from the WasmCompilationUnit.
R=titzer@chromium.org
Bug: v8:8916
Change-Id: I87852670be029b1d729f98f01729362ca379fb50
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1529009
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60325}
We should use 'constant pool' to allow concurrent patching of
the jump table like arm. For now just skip the test to make CI
mips bot green.
Bug: v8:8974
Change-Id: Iaf2b0245128fdcf2c8ed964f796781134570c889
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1524755
Commit-Queue: Yu Yin <xwafish@gmail.com>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60323}
This change significantly improves the performance of string
concatenation in optimized code for the case where the resulting string
is represented as a ConsString. On the relevant test cases we go from
serializeNaive: 10762 ms.
serializeClever: 7813 ms.
serializeConcat: 10271 ms.
to
serializeNaive: 10278 ms.
serializeClever: 5533 ms.
serializeConcat: 10310 ms.
which represents a 30% improvement on the "clever" benchmark, which
tests specifically the ConsString creation performance.
This was accomplished via a couple of different steps, which are briefly
outlined here:
1. The empty_string gets its own map, so that we can easily recognize
and handle it appropriately in the TurboFan type system. This
allows us to express (and assert) that the inputs to NewConsString
are non-empty strings, making sure that TurboFan no longer creates
"crippled ConsStrings" with empty left or right hand sides.
2. Further split the existing String types in TurboFan to be able to
distinguish between OneByte and TwoByte strings on the type system
level. This allows us to avoid having to dynamically lookup the
resulting ConsString map in case of ConsString creation (i.e. when
we know that both input strings are OneByte strings or at least
one of the input strings is TwoByte).
3. We also introduced more finegrained feedback for the Add bytecode
in the interpreter, having it collect feedback about ConsStrings,
specifically ConsOneByteString and ConsTwoByteString. This feedback
can be used by TurboFan to only inline the relevant code for what
was seen so far. This allows us to remove the Octane/Splay specific
magic in JSTypedLowering to detect ConsString creation, and instead
purely rely on the feedback of what was seen so far (also making it
possible to change the semantics of NewConsString to be a low-level
operator, which is only introduced in SimplifiedLowering by looking
at the input types of StringConcat).
4. On top of the before mentioned type and interpreter changes we added
new operators CheckNonEmptyString, CheckNonEmptyOneByteString, and
CheckNonEmptyTwoByteString, which perform the appropriate (dynamic)
checks.
There are several more improvements that are possible based on this, but
since the change was already quite big, we decided not to put everything
into the first change, but do some follow up tweaks to the type system,
and builtin optimizations later.
Tbr: mstarzinger@chromium.org
Bug: v8:8834, v8:8931, v8:8939, v8:8951
Change-Id: Ia24e17c6048bf2b04df966d3cd441f0edda05c93
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Doc: https://bit.ly/fast-string-concatenation-in-javascript
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1499497
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60318}
Consumers can use this to derive the full stack from sampled leaf nodes
without having to flatten the tree.
Bug: v8:8999
Change-Id: I42c638dd2c757837b0c03514c204be0182653291
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1525877
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60309}
Even in streaming mode we want to generate deterministic compile
errors, in particular they should contain the function name.
This CL adds a test to check that the name is present in the error
message even if the blob containing the function names is not present
at the time the compile error is detected.
R=ahaas@chromium.org
Bug: v8:8814
Change-Id: I17eb1b3bca48ee2b58b462089c140c30a3511be8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1526001
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60302}
On LoadCodeObjectEntry check for IsOffHeapTrampoline instead of
BuiltinIndexOffset so LoadCodeObjectEntry can correctly jump to the
on-heap trampoline when we use --interpreted-frames-native-stack.
R=jgruber@chromium.org, yangguo@google.com
Bug: v8:8911
Change-Id: I172d4735671726d32328de246990b513106e3a7f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1516692
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60288}
This CL only provides the implementation of memory.{init,copy,fill} and
data.drop.
Bug: v8:8965
Change-Id: I439f2520bfee8f147e4b0d1d31f954aaad2e14ad
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1510575
Commit-Queue: Ben Smith <binji@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60253}
Since StreamedSource takes ownership of the ExternalSourceStream
passed into it, it should take it by unique_ptr rather than raw
pointer to signal this transfer of ownership. The old constructor
is now deprecated.
Change-Id: I24681926c2f3141f7dd3664f72019a4c6deabfd7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1520713
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60232}
This enables things like simple DCHECKs in functions that do not have
access to isolate or heap.
Change-Id: I7962c28f0c6a4928ee880f1373501f29e45ae1f8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1517886
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Dan Elphick <delphick@chromium.org>
Commit-Queue: Maciej Goszczycki <goszczycki@google.com>
Cr-Commit-Position: refs/heads/master@{#60222}
The JSONTraceWriter didn't write the "flow_in", "flow_out" and "bind_id"
fields, which are necessary to support TRACE_EVENT_WITH_FLOW and
friends. This just mirrors the logic from trace_event_impl.cc in Chrome.
Bug: v8:8991
Change-Id: I496db587fbb74d3c7205bbab4c23ec41c63fa715
Document: http://bit.ly/v8-tracing-signals
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1521108
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60218}
Enable cross-origin frame filtering by exposing this bit from
ScriptOriginOptions.
Bug: v8:8956
Change-Id: I109eec9db8b3d42d68d32abc5edd437b1c91a9b8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1493294
Commit-Queue: Yang Guo <yangguo@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60205}
We need to ensure that the NativeModule stays alive while any
{BackgroundCompileScope} exists, because during that time we hold
shared ownership of the mutex in the {BackgroundCompileToken}. If the
{NativeModule} dies during that period, we would need to get exclusive
ownership of the mutex and deadlock.
This change requires holding a {std::weak_ptr<NativeModule>} in the
BackgroundCompileToken instead of a raw pointer, hence it can only be
initialized after the NativeModule was created. This is done via a
separate {InitCompilationState} method.
R=ahaas@chromium.org
Bug: v8:8979
Change-Id: Ia14bd272ea0bc47aec547024da6020608418c9d2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1518178
Auto-Submit: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60203}
We want to allocate feedback vectors lazily in lite mode. To do that,
we should create closures with the correct feedback cell. This cl
allocates feedback cell arrays to hold these feedback cells in lite mode.
This cl also modifies the compile lazy to builtin to expect these arrays
in the feedback cell.
Drive-by fix: InterpreterEntryTrampoline no longer has argument count in
a register. So updated comments and removed unnecessary push/pop of this
register.
Bug: v8:8394
Change-Id: I10d8ca67cebce61a284f0c80b200e1f0c24577a2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1511274
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Mythri Alle <mythria@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60189}
... similar to how we do this in native irregexp code, i.e. handle
interrupts on each backtrack. Unhandlified references into the code
ByteArray and the subject String object are updated after a potential
GC.
Since interrupts may change the subject string's representation, the
interpreter is now called in a loop to handle retries.
Bug: v8:8724
Change-Id: Ic34de8d69ccc56d4656b8ed080c2c168c212ebfc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1511477
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60187}
Added a new compilation unit for Wasm interpreter in order to make it
a first-class tier in the future. Adapted Wasm interpreter usage to
work with the new interface. The new compilation unit is currently
not used.
Change-Id: Ib9e1d0dc6ca1b03467cc43059f03ce153bb96400
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1514734
Commit-Queue: Frederik Gossen <frgossen@google.com>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60183}
This is a pre-work for allocating feedback vectors lazily. Feedback cells
are required to share the feedback vectors across the different closures
of the same function. Currently, they are held in the CreateClosureSlot
in the feedback vector. With lazy feedback vector allocation, we may not
have a feedback vector. However, we still need a place to store the
feedback cells, so if feedback vector is allocated in future it can still
be shared across closures.
Here is the detailed design doc:
https://docs.google.com/document/d/1m2PTNChrlJqw9MiwK_xEJfqbFHAgEHmgGqmIN49PaBY/edit
BUG=v8:8394
Change-Id: Ib406d862b2809b1293bfecdcfcf8dea3127cb1c7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1503753
Commit-Queue: Mythri Alle <mythria@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60147}
The {id_} stored in {ThreadId} should not be atomic. Only getting a new
id for the current thread needs to be atomic. If any user of {ThreadId}
needs atomicity, that user should wrap {ThreadId} in a {std::atomic}
instead.
Drive-by: Remove {Equals} method, use {operator==} instead.
Drive-by: Move static methods after member methods.
R=ishell@chromium.org
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel
Bug: v8:8834
Change-Id: Id0470eb2fa907948843ac1153e2dc5dcd9a8fbc8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1494006
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60146}
v8::EmbedderHeapTracer::TracePrologue may call back into V8 during
StartMarking. In this case we expect that the write barriers are set up and
consistent, i.e., global flag matches page flag.
Blink calls back into V8 in a corner case where sweeping is finalized on
incremental marking start which may trigger resettting a V8 Value which may
trigger DescriptorArray re-shuffling.
Bug: chromium:940003
Change-Id: Ia15c798d0faaab802df1c3b569b5b6a323a4fe59
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1514492
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60145}
- Converts most integer vector tests to use globals (except Select)
so results can be checked in C++ code.
- Remove integer vector result checking macros.
- Add specializations of test CompareOps for floats, so we can use
BinOps for integer vector compare opcodes.
- Remove Run#format#CompareOpTests helper functions for integer vector
types. Use Run#BinOpTests helper function instead.
Bug: v8:6020
Change-Id: I968a71c874b028a750e1118cf51f6678cae90091
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1496281
Commit-Queue: Bill Budge <bbudge@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60111}
This is a reland of 821bc64951
Original change's description:
> [wasm simd] Fix F32x4 Min and Max
>
> - Fix F32x4 tests to save results in globals, so they can be checked
> in C++ code. Perform correct checks in case of NaNs.
> - Fix ia32, x64 implementations of F32x4Min, F32x4Max to correctly
> deal with NaNs.
> - Enable tests for all float values on all platforms, except skip
> denormalized results on ARM, and skip extreme values for reciprocal,
> reciprocal square root approximation opcodes.
> - Disable Min, Max test for interpreter (see v8:8425) since it doesn't
> handle NaNs correctly.
> - Fix vmin, vmax implementations in ARM simulator.
>
> Bug: v8:8639
> Change-Id: I87e188e3cb078f09fdacfd9955f426c20a11bf64
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1495897
> Commit-Queue: Bill Budge <bbudge@chromium.org>
> Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#60021}
Bug: v8:8639
Change-Id: Ic557aa1d323693eabf5885ff5eddc15e3174079b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1501279
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60109}
When running mksnapshot standalone, no callback is registered to
serialize embedder fields. In this case they are most probably empty as
there is no embedder to set them, so provide a default serialization
that keeps them as nullptr.
Bug: v8:8822
Change-Id: I9219f2755488aa1473959c3ee75e9d4f47202359
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1507677
Auto-Submit: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60094}
Most test-log tests create their own isolates, so initializing the cctest
isolate is not necessary.
Bug: v8:7464
Change-Id: Icc3cd9d5053c4070833709cbe28e5bde2cee9708
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1507719
Reviewed-by: Dan Elphick <delphick@chromium.org>
Commit-Queue: Maciej Goszczycki <goszczycki@google.com>
Cr-Commit-Position: refs/heads/master@{#60093}
This makes sure an exception raised while compiling a module via the
embedder API is properly returned as a "scheduled exception" and hence
propagates to surrounding {v8::TryCatch} scopes.
R=clemensh@chromium.org
TEST=cctest/test-api/WasmModuleObjectCompileFailure
BUG=v8:8908
Change-Id: I52b21fbe5a4548aa346fd6c9b5bac061613db487
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1507673
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60092}
... and fix header includes to please the respective bot.
Drive-by-fix: decompression implementation is now MSVC friendly.
Bug: v8:7703, v8:8834
Change-Id: Iaf589138e5bafb32b0d9feab5cf074b71f241a3c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1505579
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60074}
This piggy-backs off similar support for lite mode, which silently skips
tests that require optimization in lite (and now jitless) modes.
Bug: v8:7777,v8:8778, v8:8885
Change-Id: I666d92685ca71682224028743f02d0cce3723135
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1503758
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60057}
... when pointer compression is enabled and some number of cleanups.
Bug: v8:7703
Change-Id: If7344abf68a1c4d54e4a79d066dc185f25055d7d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1477737
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Auto-Submit: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60056}
Yu Yin is working for company that is willing to maintain MIPS ports
therefore I am transferring ownership to Yu Yin.
No-Presubmit: true
TBR=mstarzinger@chromium.org
NOTRY=true
Change-Id: Ibb534165a1a67ad65a58ea85f5885a70b59302be
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1505454
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Predrag Rudic <prudic@wavecomp.com>
Commit-Queue: Predrag Rudic <prudic@wavecomp.com>
Cr-Commit-Position: refs/heads/master@{#60054}
This adds overloads of v8::Isolate::{Add,Remove}MicrotaskCompletedCallback,
that use MicrotasksCompletedCallbackWithData, and marks the original one
as V8_DEPRECATE_SOON for transition.
Bug: v8:8124
Change-Id: I124c3108545e1a2b29cd95620f36901431663c65
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1493766
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Taiju Tsuiki <tzik@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60045}
Port 9c7b6e1e8a
Original Commit Message:
This is the implementation of crrev.com/c/766371 for arm.
Original description:
Add the ability to return (multiple) return values on the stack:
- Extend stack frames with a new buffer region for return slots.
This region is located at the end of a caller's frame such that
its slots can be indexed as caller frame slots in a callee
(located beyond its parameters) and assigned return values.
- Adjust stack frame constructon and deconstruction accordingly.
- Extend linkage computation to support register plus stack returns.
- Reserve return slots in caller frame when respective calls occur.
- Introduce and generate architecture instructions ('peek') for
reading back results from return slots in the caller.
- Aggressive tests.
- Some minor clean-up.
R=ahaas@chromium.org, joransiu@ca.ibm.com, michael_dawson@ca.ibm.com, miladfar@ca.ibm.com
BUG=
LOG=N
Change-Id: I83df1af8c49f6d6c5b529db599fce61a1da2490d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1496549
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Junliang Yan <jyan@ca.ibm.com>
Cr-Commit-Position: refs/heads/master@{#60032}
The `TurboAssembler::CallRecordWriteStub()` method which generates out-of-line
code to call the write barrier would push and pop arguments to move them to
different registers. Let's use `mov` instructions instead, making sure we handle
overlapping registers.
Change-Id: Ideb654cd558e984ccb90c7cf44b1c2c49f1c5b50
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1499496
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60026}
This reverts commit 821bc64951.
Reason for revert: Fails on ARM hardware :(
https://ci.chromium.org/p/v8/builders/ci/V8%20Arm%20-%20debug/9271
Original change's description:
> [wasm simd] Fix F32x4 Min and Max
>
> - Fix F32x4 tests to save results in globals, so they can be checked
> in C++ code. Perform correct checks in case of NaNs.
> - Fix ia32, x64 implementations of F32x4Min, F32x4Max to correctly
> deal with NaNs.
> - Enable tests for all float values on all platforms, except skip
> denormalized results on ARM, and skip extreme values for reciprocal,
> reciprocal square root approximation opcodes.
> - Disable Min, Max test for interpreter (see v8:8425) since it doesn't
> handle NaNs correctly.
> - Fix vmin, vmax implementations in ARM simulator.
>
> Bug: v8:8639
> Change-Id: I87e188e3cb078f09fdacfd9955f426c20a11bf64
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1495897
> Commit-Queue: Bill Budge <bbudge@chromium.org>
> Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#60021}
TBR=bbudge@chromium.org,gdeepti@chromium.org
Change-Id: Ib0dc8395ff86263fe0c02faa53d90c7da46b50a6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8639
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1501732
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60022}
- Fix F32x4 tests to save results in globals, so they can be checked
in C++ code. Perform correct checks in case of NaNs.
- Fix ia32, x64 implementations of F32x4Min, F32x4Max to correctly
deal with NaNs.
- Enable tests for all float values on all platforms, except skip
denormalized results on ARM, and skip extreme values for reciprocal,
reciprocal square root approximation opcodes.
- Disable Min, Max test for interpreter (see v8:8425) since it doesn't
handle NaNs correctly.
- Fix vmin, vmax implementations in ARM simulator.
Bug: v8:8639
Change-Id: I87e188e3cb078f09fdacfd9955f426c20a11bf64
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1495897
Commit-Queue: Bill Budge <bbudge@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60021}
Moving to gtest allows negative test cases as the current parser
implementation exits the process on a parser error. The CL adds two
small negative tests. The idea is less to get full coverage, but to
have a place for regression tests.
Drive-by-change: Lexer errors need a valid source position scope and
Json parser needs a valid SourceId, otherwise we read OOB when the
error message is generated.
R=petermarshall@chromium.org
Bug: v8:8880
Change-Id: I56c4b9e0a29c8333b2e5e44f8116e5178552d2f0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1498472
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60014}
... by skipping over them. Such variables appear in the case of direct
namespace exports and default exports. (Actually, the name used for
default exports used to be "*default*" which is not recognized as
synthetic, so I'm renaming it here to ".default").
Bug: chromium:932111
Change-Id: I0554dae9614334fdc02e78606f2db47e92196429
Reviewed-on: https://chromium-review.googlesource.com/c/1494010
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60012}
I thought about potentially adding the identifer ref to the error but
that would require allocating a new string or at the very least
increasing the size of the resulting cons string. Given that the
parser is pretty performance sensitive, I've decided to not display
the identifier.
Previously, the error was:
_test.js:3: Error
a[foo].c = () => { throw Error(); };
^
Error
at a.(anonymous function).c (_test.js:3:26)
at _test.js:5:1
With this patch, the error becomes:
_test.js:3: Error
a[foo].c = () => { throw Error(); };
^
Error
at a.<computed>.c (_test.js:3:26)
at _test.js:5:1
Bug: v8:8823
Change-Id: I557b3517e317652c447ca06c5a400e9625353d9b
Reviewed-on: https://chromium-review.googlesource.com/c/1495017
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Mathias Bynens <mathias@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59985}
Instead of accessing JsonValue struct fields directly, typed
accessors check that the tag matches with the type access.
Drive-by: The factory methods are now static methods on the JsonValue
type itself, making call-sites more readable.
R=tebbi@chromium.org
Bug: v8:8880
Change-Id: I49b37b3ba8eaf1153b8aa93ea08913077c923fdc
Reviewed-on: https://chromium-review.googlesource.com/c/1495559
Commit-Queue: Simon Zünd <szuend@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59968}
The interpreter is set up specially in cctests to allow more direct
testing. This requires sometimes to write special testing code in the
interpreter which is different than production code. This CL fixes one
instance of testing code which deals with indirect calls.
In production code, indirect calls go through the indirect function
table which can change over time. In cctests, however, the indirect
function table is not set up completely. In cctests the interpreter
uses information from the module instead to acquire the target of an
indirect call. In that testing code, calls to imported JS functions
were not handled. This handling gets added with this CL.
CC=fgm@chromium.orgR=titzer@chromium.org
Bug: v8:7431
Change-Id: I3b90d4ea8fec2633c010dd8359814440c7988509
Reviewed-on: https://chromium-review.googlesource.com/c/1495560
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59965}
Design Doc: https://goo.gl/9G9d9k
The initial prototype consists of a few parts:
The VS Code extension is now built using TypeScript. The build artifact
is checked-in along side the extension. The extension now starts up
the language server when it is activated. The path to the LS
executable is configurable via VS Code settings.
The language server is a separate executable. It adds a light-weight
object model on top of a Json Parser for reading/writing LSP requests
and responses. The current server is very much bare-bones featurewise:
- Tell the client that the server can handle "goto definition"
- Recompile when Torque files change
- Goto definition support for Macros/Builtins, local variables
and arguments.
R=mathias@chromium.org, mvstanton@chromium.org, tebbi@chromium.org
Bug: v8:8880
Change-Id: Ie9b433e64ee63e9aa757b6bf71e5d52beb15b079
Reviewed-on: https://chromium-review.googlesource.com/c/1494354
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Mathias Bynens <mathias@chromium.org>
Commit-Queue: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59960}
This pooling introduces severe lock contention for Liftoff compilation,
since each compilation uses its own Zone which does at least one
segment allocation.
It's also unclear whether pooling improves performance, since {malloc}
should implement a similar pooling mechanism, but better optimized for
multithreaded uses.
Feel free to revert if this introduces significant regressions.
R=verwaest@chromium.org
Bug: v8:8916
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel
Change-Id: Iaf988bed898e35700f5f7f3310df8e01918de4c9
Reviewed-on: https://chromium-review.googlesource.com/c/1491632
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59959}
The original was reverted for breaking webkit layout tests:
https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8-Blink%20Linux%2064/30270
It also caused the following clusterfuzz failures:
chromium:935832
This was a correctness bug due to not properly handling the case of arrays with prototypes other
than Array.prototype. Accesses that were TheHole were not being handled property, both in bounds
holes in holey arrays and out of bounds on either holey or packed arrays. Handling was incorrect
both in access-assembler and in Turbofan.
chromium:935932
This bug was that there was no handling for Has checks on the global object. Turbofan was emitting
code for a store (the 'else' condition on 'access_mode == AccessMode::kLoad'). It hit a DCHECK in
debug builds but in release could show up in different places. This is the bug that caused the
webkit layout test failure that led to the revert.
Both bugs are fixed by in CL, and tests are added for those cases.
Bug: v8:8733, chromium:935932, chromium:935832
Change-Id: Iba0dfcfce6e15d2c0815a7670ece67bc13ba1925
Reviewed-on: https://chromium-review.googlesource.com/c/1493132
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Matt Gardner <magardn@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#59958}
This provides a single point where read-only space sharing will be
controlled. Eventually ReadOnlyDeserializer will take ReadOnlyHeap
instead of Isolate, first steps include
https://chromium-review.googlesource.com/c/v8/v8/+/1483054
Bug: v8:7464
Change-Id: I213819aeca6fca335235025c9195edf474230eda
Reviewed-on: https://chromium-review.googlesource.com/c/1489087
Commit-Queue: Maciej Goszczycki <goszczycki@google.com>
Reviewed-by: Dan Elphick <delphick@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59954}
This is a reland of 35269f77f8
Switches on an expression that unconditionally throws would have all their
case statements dead, causing a DCHECK error in the SwitchBuilder. This
fixes up the DCHECK to allow dead labels.
Original change's description:
> [ignition] Skip binding dead labels
>
> BytecodeLabels for forward jumps may create a dead basic block if their
> corresponding jump was elided (due to it dead code elimination). We can
> avoid generating such dead basic blocks by skipping the label bind when
> no corresponding jump has been observed. This works because all jumps
> except JumpLoop are forward jumps, so we only have to special case one
> Bind for loop headers to bind unconditionally.
>
> Since Binds are now conditional on a jump existing, we can no longer rely
> on using Bind to get the current offset (e.g. at the beginning of a try
> block). Instead, we now expose the current offset in the bytecode array
> writer. Conveniently, this means that we can be a bit smarter about basic
> blocks around these statements.
>
> As a drive-by, remove the unused Bind(target,label) function.
>
> Bug: chromium:934166
> Change-Id: I532aa452fb083560d07b90da99caca0b1d082aa3
> Reviewed-on: https://chromium-review.googlesource.com/c/1488763
> Commit-Queue: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59942}
TBR=rmcilroy@chromium.org
Bug: chromium:934166
Change-Id: If6eab4162106717ce64a2dc477000c6a76354cb4
Reviewed-on: https://chromium-review.googlesource.com/c/1494535
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59948}
This reverts commit 35269f77f8.
Reason for revert: Fuzzer unhappy: https://ci.chromium.org/p/v8/builders/ci/V8%20Fuzzer/29792
Original change's description:
> [ignition] Skip binding dead labels
>
> BytecodeLabels for forward jumps may create a dead basic block if their
> corresponding jump was elided (due to it dead code elimination). We can
> avoid generating such dead basic blocks by skipping the label bind when
> no corresponding jump has been observed. This works because all jumps
> except JumpLoop are forward jumps, so we only have to special case one
> Bind for loop headers to bind unconditionally.
>
> Since Binds are now conditional on a jump existing, we can no longer rely
> on using Bind to get the current offset (e.g. at the beginning of a try
> block). Instead, we now expose the current offset in the bytecode array
> writer. Conveniently, this means that we can be a bit smarter about basic
> blocks around these statements.
>
> As a drive-by, remove the unused Bind(target,label) function.
>
> Bug: chromium:934166
> Change-Id: I532aa452fb083560d07b90da99caca0b1d082aa3
> Reviewed-on: https://chromium-review.googlesource.com/c/1488763
> Commit-Queue: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59942}
TBR=rmcilroy@chromium.org,leszeks@chromium.org
Change-Id: I8118e54e0afa5e08b0a0a874c952f8a01f1c3242
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:934166
Reviewed-on: https://chromium-review.googlesource.com/c/1494534
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59947}
BytecodeLabels for forward jumps may create a dead basic block if their
corresponding jump was elided (due to it dead code elimination). We can
avoid generating such dead basic blocks by skipping the label bind when
no corresponding jump has been observed. This works because all jumps
except JumpLoop are forward jumps, so we only have to special case one
Bind for loop headers to bind unconditionally.
Since Binds are now conditional on a jump existing, we can no longer rely
on using Bind to get the current offset (e.g. at the beginning of a try
block). Instead, we now expose the current offset in the bytecode array
writer. Conveniently, this means that we can be a bit smarter about basic
blocks around these statements.
As a drive-by, remove the unused Bind(target,label) function.
Bug: chromium:934166
Change-Id: I532aa452fb083560d07b90da99caca0b1d082aa3
Reviewed-on: https://chromium-review.googlesource.com/c/1488763
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59942}
Implement the ReturnCall functionality for the interpreter.
Note that some tests have had to be deferred to the implementation
of ReturnCall for TurboFan.
This a reland of https://chromium-review.googlesource.com/c/v8/v8/+/1467343
Bug: v8:7431
Change-Id: Iac9392a6a81995e30009dac74035e4d728ac3dbb
Cq-Include-Trybots: luci.v8.try:v8_linux64_ubsan_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/c/1484905
Commit-Queue: Francis McCabe <fgm@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59925}
This merges the check if a protector is intact with the recording of
the dependency on it, at least in many cases.
Also introduce convenience functions to avoid the heap broker clutter.
Change-Id: I35508c4685a2f0df77819bf81075dd14a30e7e4f
Reviewed-on: https://chromium-review.googlesource.com/c/1487491
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59924}
This will allow the devtools UI to display private fields on the scope
panel.
Instead of extending GetInternalProperties, we expose a separate
GetPrivateFields method on the debug interface. This allows us to do
better type checking, for example, we can directly cast to a
v8::Private as this can only contain private fields.
This also allows us to have better constraints on the input type --
v8::Object, as opposed to a v8::Value.
The KeyAccumulator is extended to collect private names for the
PRIVATE_NAMES_ONLY PropertyFilter.
Bug: v8:8773
Change-Id: Id47c551186c59dae9a06721074ef78144f25892f
Reviewed-on: https://chromium-review.googlesource.com/c/1475664
Commit-Queue: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Dmitry Gozman <dgozman@chromium.org>
Reviewed-by: Daniel Ehrenberg <littledan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59920}
This is a reland of 71d29f7892
Original change's description:
> [nojit] Don't flush the icache in jitless mode
>
> We don't allocate executable memory in jitless mode hence there's no
> need to flush the icache.
>
> Bug: v8:7777
> Change-Id: I70a1884e6c9f11405465f5741f2eccd4f7a273fb
> Reviewed-on: https://chromium-review.googlesource.com/c/1488765
> Commit-Queue: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59887}
Bug: v8:7777
Change-Id: Id48455cf4e6d28ad2a0b753580ca51cbe0e983d3
Reviewed-on: https://chromium-review.googlesource.com/c/1491601
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59916}
This reverts commit 9215ac2c2a.
Reason for revert: Turns out it fails on windows too: https://logs.chromium.org/logs/v8/buildbucket/cr-buildbucket.appspot.com/8920360960120786848/+/steps/Check_-_extra__flakes_/0/logs/SampleWhenFrameIsNotS../0
Original change's description:
> [cpu-profiler] Disable failing tests on arm simulator only
>
> These tests still fail on arm simulators and don't appear easily fixable
> but are low priority. Let's still run them on other build configs.
>
> Bug: v8:8917
> Change-Id: If0a2f44b746eff5e82eb750103304e788dfbbfb5
> Reviewed-on: https://chromium-review.googlesource.com/c/1491593
> Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> Commit-Queue: Peter Marshall <petermarshall@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59903}
TBR=sigurds@chromium.org,petermarshall@chromium.org
Change-Id: Ic77791ddfd37e67307af6ec7b064e31e2db92039
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8917
Reviewed-on: https://chromium-review.googlesource.com/c/1491604
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59911}
Includes various fixes and cleanups here and there.
Bug: v8:7703, v8:8852
Change-Id: I603eb0212cab3fecabfa15dceb70ee23b81cdb5a
Reviewed-on: https://chromium-review.googlesource.com/c/1491595
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59909}
A small refactoring to reduce complexity. It also moves the call to
{RegisterTrapHandlerData} out of the mutex to reduce the time in this
critical section.
R=mstarzinger@chromium.org
Bug: v8:8916
Change-Id: I644f03db6099ebef22b2e33b607a2dc038b36423
Reviewed-on: https://chromium-review.googlesource.com/c/1478196
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59907}
Also enable test runner to differentiate between clang and gcc.
Bug: v8:8919
Change-Id: Icdcae0aba3644a1b1b9ddc6c037eabde27d717f7
Reviewed-on: https://chromium-review.googlesource.com/c/1491634
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Sergiy Belozorov <sergiyb@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59906}
These tests still fail on arm simulators and don't appear easily fixable
but are low priority. Let's still run them on other build configs.
Bug: v8:8917
Change-Id: If0a2f44b746eff5e82eb750103304e788dfbbfb5
Reviewed-on: https://chromium-review.googlesource.com/c/1491593
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59903}
Moved CoverageMode and TypeProfileMode enums to interface-types.h
to save one include in isolate.h. This reduces the expanded lines of code
count by ~45k.
Bug: v8:8834
R=yangguo@chromium.org
Change-Id: I399fe8cf66b1aec79bcb5831afd46a74e358244d
Reviewed-on: https://chromium-review.googlesource.com/c/1489072
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59886}
I can't reproduce any of these flakes anymore on windows or linux.
Some are confirmed fixed with the same root cause as crbug.com/v8/8883.
Others are not reproducible anymore and were probably fixed by other
de-flaking and bugfixes in the last 6 months.
Bug: v8:5193, v8:7054
Change-Id: I23ce47a98f11f3637ccf4baf01ffab5c461a0ebd
Reviewed-on: https://chromium-review.googlesource.com/c/1489074
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59873}
This reverts commit 32fc0acfef.
Reason for revert:
https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8-Blink%20Linux%2064/30270
layout test breakage:
https://test-results.appspot.com/data/layout_results/V8-Blink_Linux_64/30270/webkit_layout_tests%20%28with%20patch%29/layout-test-results/results.html
There is a dead node arriving in representation selection, which might indicate that the problem is not in this CL, but that this CL stirs up the node soup in such a way that dead code elimination gets confused.
Original change's description:
> Optimize `in` operator
>
> This change implements optimizations for the `in` operator for packed array
> elements and object properties. It adds a new feedback slot kind and an IC
> path similar to KeyedLoadIC for handling the lookups. TurboFan uses the
> feedback to optimize based on the maps and keys.
>
> For more details see:
> https://docs.google.com/document/d/1tIfzywY8AeNVcy_sen-5Xev21MeZwjcU8QhSdzHvXig
>
> This can provide 10x performance improvements of on loops of the form:
>
> for (let i = 0; i < ary.length; ++i) {
> if (i in ary) {
> ...
> }
> }
>
>
> Bug: v8:8733
> Change-Id: I766bf865a547a059e5bce5399bb6112e5d9a85c8
> Reviewed-on: https://chromium-review.googlesource.com/c/1432598
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
> Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Commit-Queue: Matt Gardner <magardn@microsoft.com>
> Cr-Commit-Position: refs/heads/master@{#59843}
TBR=ulan@chromium.org,rmcilroy@chromium.org,jkummerow@chromium.org,jarin@chromium.org,ishell@chromium.org,bmeurer@chromium.org,verwaest@chromium.org,magardn@microsoft.com
Change-Id: Ib2db974e5bed4c4a2b6b450f796bdc4b0b8fd562
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:8733
Reviewed-on: https://chromium-review.googlesource.com/c/1488761
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59857}
This CL contains a basic Json parser used to read and write the
Json-RPC messages of the language server protocol.
This CL is part of the initial language server implementation but
submitted separately for easier review.
R=tebbi@chromium.org
Bug: v8:8880
Change-Id: Icea040975e1ed1d587954c3342d8d876e01c26b8
Reviewed-on: https://chromium-review.googlesource.com/c/1479956
Commit-Queue: Simon Zünd <szuend@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59848}
This change implements optimizations for the `in` operator for packed array
elements and object properties. It adds a new feedback slot kind and an IC
path similar to KeyedLoadIC for handling the lookups. TurboFan uses the
feedback to optimize based on the maps and keys.
For more details see:
https://docs.google.com/document/d/1tIfzywY8AeNVcy_sen-5Xev21MeZwjcU8QhSdzHvXig
This can provide 10x performance improvements of on loops of the form:
for (let i = 0; i < ary.length; ++i) {
if (i in ary) {
...
}
}
Bug: v8:8733
Change-Id: I766bf865a547a059e5bce5399bb6112e5d9a85c8
Reviewed-on: https://chromium-review.googlesource.com/c/1432598
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Matt Gardner <magardn@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#59843}
When calling the `bitmap(chunk)` method of the various *MarkingState accessors
we would receive a raw `Bitmap` pointer which does not tell you if accesses to
markbits should be made atomically or not. As a result, we would default to
doing atomic operation when in fact it may not be necessary.
Here we're introducing a templated `ConcurrentBitmap` class that wraps
operations done on the markbits and allows them to be made non-atomic.
Additionaly, some of the `Bitmap` methods were only used to verify the heap and
in the tests so they do not need atomic implementations. Using them in a
concurrent context should now fail to link to make sure they're not mis-used in
the future.
Change-Id: Ifb55f8522c8bf0c87d65da9227864ee428d21bbd
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel
Reviewed-on: https://chromium-review.googlesource.com/c/1482916
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Cr-Commit-Position: refs/heads/master@{#59836}
When calling a known function from optimized code, where the number of
actual arguments does not match the number of expected arguments,
TurboFan has to call indirectly via the arguments adaptor trampoline,
which creates an argument adaptor frame underneath the activation record
for the callee. This is done so that the callee can still get to the
actual arguments, using either
1. the arguments object, or
2. rest parameters (to get to superfluous arguments), or
3. the non-standard Function.arguments accessor (for sloppy mode
functions), or
4. direct eval(), where we don't know whether there's a use of the
arguments object hiding somewhere in the string.
However going through the arguments adaptor trampoline is quite
expensive usually, it seems to be responsible for over 60% of the
call overhead in those cases.
So this adds a fast path for the case of calling strict mode functions
where we have an arguments mismatch, but where we are sure that the
callee cannot observe the actual arguments. We use a bit on the
SharedFunctionInfo to indicate that this is safe, which is controlled
by hints from the Parser which knows whether the callee uses either
arguments object or rest parameters.
In those cases we use a direct call from optimized code, passing the
expected arguments instead of the actual arguments. This improves the
benchmark on the document below by around 60-65%, which is exactly
the overhead of the arguments adaptor trampoline that we save in this
case.
This also adds a runtime flag --fast_calls_with_arguments_mismatches,
which can be used to turn off the new behavior. This might be handy
for checking the performance impact via Finch.
Bug: v8:8895
Change-Id: Idea51dba7ee6cb989e86e0742eaf3516e5afe3c4
Cq-Include-Trybots: luci.chromium.try:linux-blink-rel
Doc: http://bit.ly/v8-faster-calls-with-arguments-mismatch
Reviewed-on: https://chromium-review.googlesource.com/c/1482735
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59825}
This means ReadOnlyDeserializer can be made isolate independent. Without
this Isolate is needed for rehashing read-only space.
Bug: v8:7464
Change-Id: Id2c9968a0ecfa2362f499ded6c7e0f7b2be00dfb
Reviewed-on: https://chromium-review.googlesource.com/c/1483054
Commit-Queue: Maciej Goszczycki <goszczycki@google.com>
Reviewed-by: Dan Elphick <delphick@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59823}
Field representation tracking is only used by TurboFan.
Bug: v8:7777
Change-Id: I0d930f8dc0b68ff030111f12092b183c4c257ac6
Reviewed-on: https://chromium-review.googlesource.com/c/1481218
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59820}
When using a shared WebAssembly.Memory, always try to reserve up to the
maximum to avoid having to move the buffer. If after multiple retries
it is not possible to reserve the maximum, fall back to initial size
reservation.
- Add new methods to allocate a Shared WebAssemblyMemory.buffer
- Use these to reserve upto the mazimum for a Shared WebAssembly.Memory
- Cleanup js-api so actual allocation is done inside the constructor
BUG: v8:8564
Change-Id: I97815c7c94a2b84416cd867fb23b3c815d7f0f12
Reviewed-on: https://chromium-review.googlesource.com/c/1480910
Reviewed-by: Ben Smith <binji@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59805}
Implement the ReturnCall functionality for the interpreter.
Note that some tests have had to be deferred to the implementation
of ReturnCall for TurboFan.
Bug: v8:7431
Change-Id: I091528e72f9113ddf1929bd1a5650b490bc8cc0c
Reviewed-on: https://chromium-review.googlesource.com/c/1467343
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Francis McCabe <fgm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59803}
... which will work for 32-bit kTaggedSize but we are not there yet.
Bug: v8:7703
Change-Id: Iaceb126ba316f37532221597cbd4f7e85ceb4fb9
Reviewed-on: https://chromium-review.googlesource.com/c/1482917
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59797}
With 32-bit kTaggedSize small strings may be not externalizable.
Bug: v8:7703
Change-Id: I34002568214742dadb2358fca97dfb4b92a5342a
Reviewed-on: https://chromium-review.googlesource.com/c/1480373
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59770}
It's only used in tests, and for some reason v8 refers to a macro defined
in src.git, so I need to remove this in v8 first before I can remove it
in Chromium.
Bug: chromium:934255
Change-Id: I31ea32aa43cf7a5f518def7b91dce99dcb268709
Reviewed-on: https://chromium-review.googlesource.com/c/1480911
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Nico Weber <thakis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59769}
The default TracingController (used by d8 and Node) has some concurrency
issues. The new test flushes these out, when a second thread logs trace
events while the main thread calls StopTracing().
- Use an acquire load in UpdateCategoryGroupEnabledFlags() because this
was racing with GetCategoryGroupEnabled() where a new category is
added in the slow path. g_category_groups is append-only, but
reads/writes to g_category_index need to be correctly ordered so that
new categories are added and only then is the change to the index
visible. The relaxed load ignored this and caused unsynchronized
read/write.
- Use a relaxed load in ~ScopedTracer() to access category_group_enabled
as this previously used a non-atomic operation which caused a race
with UpdateCategoryGroupEnabledFlag() which does a relaxed store.
- Replace TracingController::mode_ with an atomic bool as read/writes to
mode_ were not synchronized and caused TSAN errors. It only has two
states and it doesn't seem like we will extend this so just convert it
to bool.
- Take the lock around calling trace_object->Initialize in
AddTraceEvent(), and around trace_buffer_->Flush() in StopTracing().
These two raced previously as the underlying TraceBufferRingBuffer
passes out pointers to TraceObjects in a synchronized way, but the
caller (AddTraceEvent) then writes into the object without
synchronization. This leads to races when Flush() is called, at which
time TraceBufferRingBuffer assumes that all the pointers it handed out
are to valid, initialized TraceObjects - which is not true because
AddTraceEvent may still be calling Initialize on them. This could be
the cause of issues in Node.js where the last line of tracing/logging
sometimes gets cut off. This is kind of a band-aid solution - access
to the TraceObjects handed out by the ring buffer really needs proper
synchronization which at this point would require redesign. It's quite
likely we will replace this with Perfetto in the near future so not
much point investing in this code right now.
- Enable TracingCpuProfiler test which was flaky due to these bugs.
Bug: v8:8821
Change-Id: I141296800c6906ac0e7f3f21dd16d861b07dae62
Reviewed-on: https://chromium-review.googlesource.com/c/1477283
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ali Ijaz Sheikh <ofrobots@google.com>
Cr-Commit-Position: refs/heads/master@{#59752}
In the Crankshaft days we (mis)used the Representation to also express
the various internal representations that the compiler understands. But
with TurboFan we now have proper MachineRepresentation and MachineType,
which do that independently. So there's no need to have this in the
Representation class anymore, and instead the Representation class only
needs to deal with the field representations.
Bug: v8:8749, v8:8834, v8:8865
Change-Id: I34ea9558b5fdf20d6c7939b52762eaffd4316b06
Reviewed-on: https://chromium-review.googlesource.com/c/1479954
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59750}
I missed this one in my previous CL.
R=jarin@chromium.org
Change-Id: Ie4b912ee7e3367da48c0d4b092ad09e3f81de788
Reviewed-on: https://chromium-review.googlesource.com/c/1477677
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59743}
This extends the "test-jump-table-assembler" stress test to supported
architectures. Note that on both PPC and S390 the tests flushes out the
race during jump table patching pretty reliably. Fixing this issue is
outside the scope of this change, this just ensures test coverage exists
but keeps the test in question disabled.
R=clemensh@chromium.org
TEST=cctest/test-jump-table-assembler
BUG=v8:8018
Change-Id: Ia299ed2a42f9858019627270a25026b53f3628d3
Reviewed-on: https://chromium-review.googlesource.com/c/1478200
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59738}
This reverts commit f8962ae1a2.
Reason for revert: breaks Arm bots, e.g. https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Arm/9655, task: https://chromium-swarm.appspot.com/task?d=true&id=431dfa503db16d10
Original change's description:
> Preparing v8 to use with python3 /test
>
> There are now less that 400 days until the end of life
> of Python 2(aka _legacy_ Python) https://pythonclock.org/ .
> The code compatibility check for python2 and python3
> used the following tools: futurize, flake8
> You can see the reports here: https://travis-ci.com/bmsdave/v8/builds
>
> This CL was uploaded by git cl split.
>
> Bug: v8:8594
> Change-Id: Idbf467daf629a4e808345a6a88036c2a3f259138
> Reviewed-on: https://chromium-review.googlesource.com/c/1470121
> Commit-Queue: Michael Achenbach <machenbach@chromium.org>
> Reviewed-by: Michael Achenbach <machenbach@chromium.org>
> Reviewed-by: Sergiy Belozorov <sergiyb@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59679}
TBR=machenbach@chromium.org,sergiyb@chromium.org,herhut@chromium.org,bmsdave@gmail.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:8594
Change-Id: I17a0a7b203fa2c0ab0f965240ee1415b7513e1cf
Reviewed-on: https://chromium-review.googlesource.com/c/1478692
Reviewed-by: Sergiy Belozorov <sergiyb@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Sergiy Belozorov <sergiyb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59725}
Also disables tests in Lite mode that currently fail with lazy source
positions.
Bug: v8:8510
Change-Id: Id27b7cb31682559173b137ef51eaf06d517ee9ec
Reviewed-on: https://chromium-review.googlesource.com/c/1477129
Commit-Queue: Dan Elphick <delphick@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59700}
This allows non-monolithic embedders to always allocate memory
for ArrayBuffer instances using the right allocation method.
This is based on a patch that Electron is currently using.
Refs: 1898f91620/patches/common/v8/array_buffer.patch
Change-Id: I39a614343118a0594aab48699a99cc2aad5b7ba9
Reviewed-on: https://chromium-review.googlesource.com/c/1462003
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59697}
Fixes cctest/test-cpu-profiler/DetailedSourcePositionAPI by ensuring
that source positions are available when starting an optimize job when
NeedsDetailedOptimizedCodeLineInfo is set. Also collects source
positions when inlining functions and adds a new test for this.
Bug: v8:8510
Change-Id: I9d84e37f3c8b638db080f6ec4b6633cdd7e3ee2f
Reviewed-on: https://chromium-review.googlesource.com/c/1472634
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Commit-Queue: Dan Elphick <delphick@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59685}
There are now less that 400 days until the end of life
of Python 2(aka _legacy_ Python) https://pythonclock.org/ .
The code compatibility check for python2 and python3
used the following tools: futurize, flake8
You can see the reports here: https://travis-ci.com/bmsdave/v8/builds
This CL was uploaded by git cl split.
Bug: v8:8594
Change-Id: Idbf467daf629a4e808345a6a88036c2a3f259138
Reviewed-on: https://chromium-review.googlesource.com/c/1470121
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Sergiy Belozorov <sergiyb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59679}
When setting up the initial map for a (class or function) constructor,
we always over-allocate a bunch of in-object properties, in case not
all property assignments happen as `this.prop = val` assignments in
the constructor. However this over-allocation was a bit too aggressive
and added a slack of 8 to each class constructor (plus a minimum of
two, when there was no `this.prop = val` assignment). So in total this
would yield an object with initially 40 in-object property slots in
case of a simple class hierarchy like this:
```js
class A {};
class B extends A {};
class C extends B {};
class D extends C {};
new D;
```
While the slack tracking takes care of eventually shrinking the objects
to appropriate sizes, this aggressive over-allocation is still going to
hurt performance quite a bit in the beginning, and will also lead to
more traffic on the minor GC for now good reason.
Instead of the above, we now allocate a minimum of 2 in-object
properties per class (in a hierarchy) and then add a slack of 8 in the
end. Meaning for the example above we end up with 16 initial in-object
property slots, which seems sensible.
Bug: v8:8853
Change-Id: I4a11e35a8612ceef1d776ca2f0543a26c8c2a2bf
Reviewed-on: https://chromium-review.googlesource.com/c/1477276
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59670}
Signal a condition variable when profiling thread shutdown should occur,
waking up a profiling thread that's currently waiting for the next tick.
Mitigates the case where if a high sample interval is specified (e.g.
60s), the main thread is blocked until the next sample occurs due to a
Sleep() call.
Bug: v8:8843
Change-Id: Ied6b0bfb5c47a072ade17870911b961f5091f613
Reviewed-on: https://chromium-review.googlesource.com/c/1470953
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59648}
This replaces Heap::InNewSpace with Heap::InYoungGeneration and
fixes tests that are sensitive to page size.
Bug: chromium:852420
Change-Id: I32b1eafb45813ea3bdcbda075f9e6156aaf4c5e3
Reviewed-on: https://chromium-review.googlesource.com/c/1475766
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59647}
This is a step towards making gn check pass on v8 without third_party
Change-Id: I6a256d65159695e2ba2a5d44c0437cac9b28aa3a
Bug: v8:8834, v8:8855
Reviewed-on: https://chromium-review.googlesource.com/c/1475460
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59641}
Escaped contextual keywords are simply valid identifiers if they do not occur
in the context where they are a keyword. Escape sequences of the form \uNNNN
or \u{NNNNNN} must be consumed as part of the identifier.
If such escaped contextual keywords do occur in a context where they are a
keyword, they are a syntax error. In that case we manually check locally
whether they are escaped.
Bug: v8:6543, v8:6541
Change-Id: I7e1557963883e722310b9078d7d7636ec94aa603
Reviewed-on: https://chromium-review.googlesource.com/c/1473293
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59628}
Also drive-by cleanup the TestMemoryAllocatorScope class so that it
takes ownership of the old allocator while it holds onto it, and so
that the MemoryAllocator for testing is constructed inside the scope
rather than passed into it. This means users don't need to explicitly
call TearDown() and delete the allocator as the scope does it for them.
Change-Id: Id7da3c074618a376d2edfe3385bb185ba8287cea
Reviewed-on: https://chromium-review.googlesource.com/c/1392194
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59627}
This changes the behavior of overload resolution to not consider if the
call happens in a branching context (i.e., with implicit True and False
labels from a conditional operator or statement).
That way, it is not possible to get different behavior accidentially
by using an operator in the wrong context. Instead, there will be a
compile error because the call happened in a non-branching context, or
because it is ambiguous without this information.
The test doesn't perfectly fit the issue (impossible until we have
negative tests), but instead tests that equality on HeapNumber's works
in boolean contexts, which is something Peter fixed already in
https://crrev.com/c/1432596.
Bug: v8:8737 v8:7793
Change-Id: I08a3801891587aac705dc93b1c65b0c6cf164107
Reviewed-on: https://chromium-review.googlesource.com/c/1456093
Reviewed-by: Peter Wong <peter.wm.wong@gmail.com>
Reviewed-by: Daniel Clifford <danno@chromium.org>
Commit-Queue: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59625}
This takes heap-inl.h out of the "Giant Include Cluster".
Naturally, that means adding a bunch of explicit includes
in a bunch of places that relied on transitively including
them before.
As of this patch, no header file outside src/heap/ includes
heap-inl.h.
Bug: v8:8562,v8:8499
Change-Id: I65fa763f90e66afc30d105b9277792721f05a6d4
Reviewed-on: https://chromium-review.googlesource.com/c/1459659
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59617}
HeapNumbers and MutableHeapNumber requires alignment for their double
value field but for now this field can be misaligned on 32-bit platforms.
According to code in Heap::GetFillToAlign() function, kDoubleUnaligned
doesn't actually mean "unaligned" but "aligned to half of double".
This CL fixes this misalignment.
Change-Id: I9b9c58d580bb287e7dad44bc96cd6b4593707b5e
Reviewed-on: https://chromium-review.googlesource.com/c/1470113
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59599}
If enable_omit_source_positions is true (defaults to false), source
position tables are not generated when compiling bytecode. They will
then be regenerated when exceptions are thrown.
This adds a new function Compiler::CollectSourcePositions which given a
SharedFunctionInfo with bytecode but no source position table re-parses
and regenerates the bytecode but this time with source positions
collection enabled. Note this will reparse all inner functions that
have previously been compiled since the preparse data is no longer
available.
With the flag enabled there still 18 test failures mostly related to
debugging.
v8: 8510
Change-Id: I46dff9818d8a89c901ba8ae8df94dcaca83aa658
Reviewed-on: https://chromium-review.googlesource.com/c/1385165
Commit-Queue: Dan Elphick <delphick@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59595}
This is a reland of c79a63e634
Original change's description:
> [nojit] Don't expose wasm in jitless mode
>
> Wasm currently still creates executable memory even in
> interpreter-only mode, and is thus unsupported in jitless mode. This
> hides wasm completely, which will help e.g. fuzzers that attempt to
> run wasm code (and currently crash on the CHECK in AddOwnedCode).
>
> Bug: v8:7777,chromium:931068
> Change-Id: Iee692cb947d482ba16fb0f4da32490d42d5daef8
> Reviewed-on: https://chromium-review.googlesource.com/c/1470124
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Commit-Queue: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59561}
Tbr: mstarzinger@chromium.org
Bug: v8:7777, chromium:931068
Change-Id: I535c3f598c90cd5c4072a73544cc33c5bf5460c1
Reviewed-on: https://chromium-review.googlesource.com/c/1470132
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59571}
This reverts commit c79a63e634.
Reason for revert: Needs addtl test skips: https://chromium-review.googlesource.com/c/1470124
Original change's description:
> [nojit] Don't expose wasm in jitless mode
>
> Wasm currently still creates executable memory even in
> interpreter-only mode, and is thus unsupported in jitless mode. This
> hides wasm completely, which will help e.g. fuzzers that attempt to
> run wasm code (and currently crash on the CHECK in AddOwnedCode).
>
> Bug: v8:7777,chromium:931068
> Change-Id: Iee692cb947d482ba16fb0f4da32490d42d5daef8
> Reviewed-on: https://chromium-review.googlesource.com/c/1470124
> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
> Commit-Queue: Jakob Gruber <jgruber@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#59561}
TBR=mstarzinger@chromium.org,jgruber@chromium.org
Change-Id: Ic242db3efe73ef362e0f0c3efde90682db6de4a8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7777, chromium:931068
Reviewed-on: https://chromium-review.googlesource.com/c/1470131
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59570}
They did the same thing.
Change-Id: I6b63762352dae2dce58fb3a6182af52cd0aadef6
Reviewed-on: https://chromium-review.googlesource.com/c/1470126
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59566}
Wasm currently still creates executable memory even in
interpreter-only mode, and is thus unsupported in jitless mode. This
hides wasm completely, which will help e.g. fuzzers that attempt to
run wasm code (and currently crash on the CHECK in AddOwnedCode).
Bug: v8:7777,chromium:931068
Change-Id: Iee692cb947d482ba16fb0f4da32490d42d5daef8
Reviewed-on: https://chromium-review.googlesource.com/c/1470124
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59561}
For macros expanding to function definitions, I removed the spurious ; after
macro invocations. For macros expandign to function declarations, I made the ;
required and consistently inserted it.
No behavior change.
Bug: chromium:926235
Change-Id: Ib8085d85d913d74307e3481f7fee4b7dc78c7549
Reviewed-on: https://chromium-review.googlesource.com/c/1467545
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Nico Weber <thakis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59558}
They didn't take the new premonomorphic state into account. My bad.
Bug: chromium:931424
Change-Id: I74ad1f0f8ce0eb764d63c2a3527e597962baca6d
Reviewed-on: https://chromium-review.googlesource.com/c/1470125
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59552}
Sets an atomic field on each sampler when it requests a sample, to be
checked when the SIGPROF handler is executed. A counter is not used
since signals may be coalesced.
Prior to this change, all samplers attached to an isolate received
samples when other samplers sent SIGPROF to the VM thread. This change
alters the behaviour of different CpuProfiler instances on the same
isolate to be in line with the Windows / Fuchsia behaviour.
Bug: v8:8835
Change-Id: I0caaa845b596efc9d8b1cd7716c067d9a6359c57
Reviewed-on: https://chromium-review.googlesource.com/c/1468941
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Alexei Filippov <alph@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59545}
Implemented branching and merging of Environments to facilitate handling of
conditional and unconditional jumps in the SerializerForBackgroundCompilation.
Added tests and printing helpers for the Environment. The internal structure
of the hints was changed to ZoneSet to support avoiding of duplicates.
Alternative implementation considerations were documented here:
https://docs.google.com/document/d/1vCQYhtFPqXafSMweSnGD8l0TKEIB6cPV5UGMHJtpy8k/edit?ts=5bf7d341#heading=h.jx4br0df5qzmR=neis@chromium.org
Bug: v8:7790
Change-Id: Ib929c75ddb7f7fb290a5ca28d4422680a1514a4f
Reviewed-on: https://chromium-review.googlesource.com/c/1451847
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59534}
... as there's no search involved and there are never multiple names.
Change-Id: Ice88c4d98195e74f6540926b0a1199df62b42da2
Reviewed-on: https://chromium-review.googlesource.com/c/1466645
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59532}
Most of the users of InNewSpace actually mean InYoungGeneration.
Subsequent CL will remove InNewSpace to avoid confusion.
Bug: chromium:852420
Tbr: mlippautz@chromium.org
Change-Id: I6234d162d51c215787972e7ada1cd5b804b60fda
Reviewed-on: https://chromium-review.googlesource.com/c/1463521
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59523}
This avoids confusion with the code that is being generated.
R=sigurds@chromium.org
Change-Id: Icb5bd417ca8502553af201654cca1419b9eac87d
Reviewed-on: https://chromium-review.googlesource.com/c/1462001
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59522}
Currently, PRIVATE_NAME / PrivateIdentifier is not valid in
ObjectLiterals or other places expecting the PropertyName production.
A SyntaxError here prevents an access violation later on when attempting
to dereference a null property key
BUG=v8:8808
R=gsathya@chromium.org, littledan@chromium.org
Change-Id: Idde9c669cb48c1595b83115351a8fe0caed40eef
Reviewed-on: https://chromium-review.googlesource.com/c/1461161
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Caitlin Potter <caitp@igalia.com>
Cr-Commit-Position: refs/heads/master@{#59515}
The line number is associated with each sample along with pointer
to the ProfileNode and timeDelta. Once collected line numbers are
streamed as an array of integers in "ProfileChunk" trace events.
If all the line numbers are zero, the array may be omitted. Otherwise
the array length matches length of samples and timeDeltas arrays.
BUG=chromium:925089
Change-Id: I1ef5cd1b208b03bb127f4d17b1efa74c01959542
Reviewed-on: https://chromium-review.googlesource.com/c/1459739
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Alexei Filippov <alph@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59514}
Fixes a segfault that occurs when v8::CpuProfilers are restarted caused
by the reuse of a stale CodeEventObserver.
Bug: chromium:929928
Change-Id: I5d5f7eaf5cd903910130cdb0cfec8c3fd6608edd
Reviewed-on: https://chromium-review.googlesource.com/c/1459740
Reviewed-by: Alexei Filippov <alph@chromium.org>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#59506}
