For int16 imm values Subu would emit addiu with -imm value, but doing
this with min_int16 would overflow and produce incorrect result. This is
fixed by checking if -imm is int16. A test for this case is created.
An optimization is also added for values imm where we cannot just emit
addiu and loading -imm to a register takes one instruction using ori.
Then instead of loading imm with lui;ori and subtracting with subu, we
can load -imm with ori and add with addu.
BUG=
TEST=cctest/test-assembler-mips/Subu
Review-Url: https://codereview.chromium.org/2845043002
Cr-Commit-Position: refs/heads/master@{#44932}
For MIPS32, instructions ldc1 and sdc1 are moved into macro-assembler
and renamed as Ldc1 and Sdc1. The reason for placing them into
macro-assembler is that they emmit two or three instructions.
TEST=test/cctest/test-assembler-mips,
test/cctest/test-code-stubs-mips,
test/cctest/test-macro-assembler-mips
BUG=
Review-Url: https://codereview.chromium.org/2751973002
Cr-Commit-Position: refs/heads/master@{#43977}
Cleanup CHECK_EQ order and simplify CHECK_EQ(true/false).
Cleanup callorder for negative numbers
Cleanup callorder order for capital letter constants.
Cleanup callorder for test.x checks.
BUG=
Review-Url: https://codereview.chromium.org/2677183002
Cr-Commit-Position: refs/heads/master@{#42997}
Tests were falling in qemu because of inexact computation in tests.
After correcting tests, simulator also had to be fixed.
Review-Url: https://codereview.chromium.org/2539133002
Cr-Commit-Position: refs/heads/master@{#41447}
Enabled big endian testing for MIPS32 and MIPS64. The tests are also
adapted for big endian variant.
TEST=cctest/test-assembler-mips[64]
BUG=
Review URL: https://codereview.chromium.org/1867503002
Cr-Commit-Position: refs/heads/master@{#35369}
Use macro instructions for min, max ops to get the same functionality on
pre-r6 and r6 targets.
BUG=
TEST=mjsunit/math-min-max, cctest/test-macro-assembler-mips64/min_max_nan, cctest/test-macro-assembler-mips/min_max_nan, cctest/test-assembler-mips64/min_max, cctest/test-assembler-mips/min_max
Review URL: https://codereview.chromium.org/1694833002
Cr-Commit-Position: refs/heads/master@{#35073}
Make the low level assembler implementation exact and protected to disallow explicit usage.
BUG=
Review URL: https://codereview.chromium.org/1749263002
Cr-Commit-Position: refs/heads/master@{#34673}
Fix failures on MIPS simulator because incomplete
handling of MTHC1 and MFHC1 in Fp32 mode
Fix failures on older kernels that have problems with
MTHC1 and MFHC1 in kernel FPU emulation
Original issue's description:
> Revert of MIPS: Add FPXX support to MIPS32R2 (patchset #3
> id:40001 of https://codereview.chromium.org/1586223004/ )
>
> Reason for revert:
> Revert patch due to a number of failures appearing on the > MIPS v8 simulator
>
> Original issue's description:
>> MIPS: Add FPXX support to MIPS32R2
>>
>> The JIT code generated by V8 is FPXX compliant
>> when v8 compiled with FPXX flag. This allows the code to
>> run in both FP=1 and FP=0 mode. It also alows v8 to be used
>> as a library by both FP32 and FP64 binaries.
>>
>> BUG=
>>
>> Committed: https://crrev.com/95110dde666158a230a823fd50a68558ad772320
>> Cr-Commit-Position: refs/heads/master@{#33576}
BUG=
Review URL: https://codereview.chromium.org/1659883002
Cr-Commit-Position: refs/heads/master@{#33808}
Reason for revert:
Revert patch due to a number of failures appearing on the MIPS v8 simulator
Original issue's description:
> MIPS: Add FPXX support to MIPS32R2
>
> The JIT code generated by V8 is FPXX compliant
> when v8 compiled with FPXX flag. This allows the code to
> run in both FP=1 and FP=0 mode. It also alows v8 to be used
> as a library by both FP32 and FP64 binaries.
>
> BUG=
>
> Committed: https://crrev.com/95110dde666158a230a823fd50a68558ad772320
> Cr-Commit-Position: refs/heads/master@{#33576}
TBR=paul.lind@imgtec.com,gergely.kis@imgtec.com,akos.palfi@imgtec.com,ilija.pavlovic@imgtec.com,marija.antic@imgtec.com,miran.karic@imgtec.com,balazs.kilvady@imgtec.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1646813003
Cr-Commit-Position: refs/heads/master@{#33583}
The JIT code generated by V8 is FPXX compliant
when v8 compiled with FPXX flag. This allows the code to
run in both FP=1 and FP=0 mode. It also alows v8 to be used
as a library by both FP32 and FP64 binaries.
BUG=
Review URL: https://codereview.chromium.org/1586223004
Cr-Commit-Position: refs/heads/master@{#33576}
Per request in https://codereview.chromium.org/1047213002/
These files will continue to have a lot of churn in next two months
as we finish support for MIPS r6 instruction set. When things settle
down, we will do a clang-format --full to clean them up. For now,
we'd prefer to be able to do easy diffs, and will do incremental
re-formats as we make changes.
BUG=
Review URL: https://codereview.chromium.org/1546973003
Cr-Commit-Position: refs/heads/master@{#33038}
After Cvt_d_uw macro, upper 32 bits of the output remain
unitnitialized which caused flaky failures on some tests on
MIPS32R6
TEST=cctest/test-assembler-mips/MIPS13,mjsunit/asm/int32-umod
BUG=
Review URL: https://codereview.chromium.org/1537973002
Cr-Commit-Position: refs/heads/master@{#32983}
The test expectations should fail consistently in both release and debug
builds. DCHECK is only meant for debug-only checks in production code.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1506753002
Cr-Commit-Position: refs/heads/master@{#32639}
MIPS R6 introduced new behavior for handling of NaN values
for TRUNC, FLOOR, CEIL and CVT instructions. Adding support for
the new behavior in MIPS and MIPS64 simulators. Fixing tests
for MIPS and MIPS64 to align them with the new behavior.
BUG=
Review URL: https://codereview.chromium.org/1488613007
Cr-Commit-Position: refs/heads/master@{#32499}
Fixing failures in cctest/test-assembler-mips/CVT on Mips32R2 without
FP64 support
BUG=
Review URL: https://codereview.chromium.org/1459763003
Cr-Commit-Position: refs/heads/master@{#32121}
Remove incorrect usage of callee-saved FPU regs (f20 and above).
Also remove unnecessary push/pop which were occasionally unpaired,
and caused crash.
TEST=cctest/test-assembler-mips[64]
BUG=
Review URL: https://codereview.chromium.org/1338713004
Cr-Commit-Position: refs/heads/master@{#30729}
Also clean up variable naming in min_max and other tests. Fix class_fmt in mips64 assembler test for proper NaN checking
Review URL: https://codereview.chromium.org/1276813004
Cr-Commit-Position: refs/heads/master@{#30073}
In simulator data trace, DSLL did not print result and
BAL/BGEZAL omitted result from an instruction executed
in delay slot.
TEST=cctest/test-assembler-mips[64]
BUG=
Review URL: https://codereview.chromium.org/1245173002
Cr-Commit-Position: refs/heads/master@{#29796}
Disabling rsqrt and recip for mips32r1 in assembler, disassembler and simulator
Review URL: https://codereview.chromium.org/1221663006
Cr-Commit-Position: refs/heads/master@{#29425}
The remaining uses need some non-mechanical work:
* non-standard-layout type, probably due to mixed access control
* extended field designators
Review URL: https://codereview.chromium.org/1173343006
Cr-Commit-Position: refs/heads/master@{#29071}
On Mac for the requested minimal version (10.5) only old stl (from gcc 4.2.1) can be used so unfortunately we can't use numeric_limits<>::lowest() which were added in 874c54e05e
BUG=
TEST=cctest/test-assembler-mips64, cctest/test-assembler-mips
Review URL: https://codereview.chromium.org/1175463003
Cr-Commit-Position: refs/heads/master@{#28907}
Implement assembler, disassembler tests for all instructions for mips32 and mips64. Additionally, add missing single precision float instructions for r2 and r6 architecture variants in assembler, simulator and disassembler with corresponding tests.
Review URL: https://codereview.chromium.org/1145223002
Cr-Commit-Position: refs/heads/master@{#28595}
Implement assembler, disassembler tests for all instructions for mips32 and mips64. Additionally, add missing single precision float instructions for r2 and r6 architecture variants in assembler, simulator and disassembler with corresponding tests.
Review URL: https://codereview.chromium.org/1147493002
Cr-Commit-Position: refs/heads/master@{#28472}
Reason for revert:
Simulator test failures in RunChangeFloat64ToInt.., RunChangeTaggedToInt32,
div-mul-minus-one
Original issue's description:
> Implement assembler, disassembler tests for all instructions for mips32
> and mips64. Additionally, add missing single precision float instructions
> for r2 and r6 architecture variants in assembler, simulator and disassembler
> with corresponding tests.
BUG=
Review URL: https://codereview.chromium.org/1143473003
Cr-Commit-Position: refs/heads/master@{#28404}
Implement assembler, disassembler tests for all instructions for mips32 and mips64. Additionally, add missing single precision float instructions for r2 and r6 architecture variants in assembler, simulator and disassembler with corresponding tests.
Review URL: https://codereview.chromium.org/1119203003
Cr-Commit-Position: refs/heads/master@{#28402}
Added rounding according to fcsr, CVT_W_D and RINT.D instruction in assembler, dissasembler and simulator and wrote appropiate tests.
BUG=
Review URL: https://codereview.chromium.org/1108583003
Cr-Commit-Position: refs/heads/master@{#28143}
- Fixed single float register type instruction en[de]coding in assembler and disassembler.
- Added max and min instructions for r6 and corresponding tests.
- Fixed selection instruction for boundary cases in simulator.
- Update assembler tests to be more thorough wrt boundary cases.
TEST=cctest/test-assembler-mips64/MIPS17, MIPS18
cctest/test-disasm-mips64/Type1
cctest/test-assembler-mips/MIPS16, MIPS17
cctest/test-disasm-mips/Type1
BUG=
Review URL: https://codereview.chromium.org/1057323002
Cr-Commit-Position: refs/heads/master@{#27601}
Add missing parts of the port to MIPS/MIPS64 implementations.
BUG=
Review URL: https://codereview.chromium.org/1047213002
Cr-Commit-Position: refs/heads/master@{#27551}
