This change replaces the bitwise masking of uses by storing the most general truncation for all uses.
Review URL: https://codereview.chromium.org/1464763003
Cr-Commit-Position: refs/heads/master@{#32248}
The first bug was that there are two different "initialization positions"
passed into PatternRewriter::DeclareAndInitializeVariables, and we weren't
setting them all properly for this case.
After further code review, it became clear that we weren't even recording
the correct position (the end of the initializer expression).
The combination of those two bugs caused the hole check elimination code
in full-codegen to skip emitting a hole check.
This patch takes care of both of those things. A follow-up will try
to reduce the number of "initializer positions" we track in the
variable declaration code.
R=littledan@chromium.org
BUG=v8:4568
LOG=n
Review URL: https://codereview.chromium.org/1468143004
Cr-Commit-Position: refs/heads/master@{#32237}
For web compat reasons, we support an initializer in the declaration
part of a for-in loop. But we should disallow this for destructured
declarations (just as we do for lexical declarations). In fact, without
disallowing it, we crash.
Also fix up the PreParser to have the same restrictions here as the parser
(the lexical check was missing there), verified by running the message tests
with --min-preparse-length=0.
In fixing the logic I've also cleaned up the code a bit, removing the
only-called-once DeclarationParsingResult::SingleName method.
BUG=v8:811
LOG=n
Review URL: https://codereview.chromium.org/1471973003
Cr-Commit-Position: refs/heads/master@{#32236}
Don't replace `TruncateFloat64ToInt32(RoundInt64ToFloat64(value))` with
`value`. Generally, `value` may have a range bigger than the one that
could fit into Int32. Replace it with `TruncateInt64ToInt32(value)`
instead, and only if the `value` fits into Float64 without precision
loss.
Add missing mjsunit test for 52bit multiplication/division optimization
that has landed in refs/heads/master@{#31899}.
BUG=
R=titzer@google.com
Review URL: https://codereview.chromium.org/1433353006
Cr-Commit-Position: refs/heads/master@{#32227}
Reason for revert:
Fails on V8 Fuzzer: https://build.chromium.org/p/client.v8/builders/V8%20Fuzzer/builds/6028
Original issue's description:
> Move --harmony-destructuring-bind to shipping
>
> Also fix CheckConflictingVarDeclarations() to properly handle
> legacy const bindings. Without that change enabling the flag
> causes code like:
>
> function f() { const x; var x; }
>
> to throw an early error, rather than wait to throw the error
> until f is invoked.
>
> BUG=v8:811
> LOG=y
> CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
>
> Committed: https://crrev.com/515093630a4a925a66d550561e38293d49633f10
> Cr-Commit-Position: refs/heads/master@{#32222}
TBR=rossberg@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:811
Review URL: https://codereview.chromium.org/1470333002
Cr-Commit-Position: refs/heads/master@{#32226}
Adds code and tests to support CreateClosure bytecode when building
graphs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1458603012
Cr-Commit-Position: refs/heads/master@{#32224}
Also fix CheckConflictingVarDeclarations() to properly handle
legacy const bindings. Without that change enabling the flag
causes code like:
function f() { const x; var x; }
to throw an early error, rather than wait to throw the error
until f is invoked.
BUG=v8:811
LOG=y
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1451843002
Cr-Commit-Position: refs/heads/master@{#32222}
Change the runtime entries and their associated code stubs for object
and array literal creation to take the closure instead of the raw
literals pointer. This is way easier to deal with (and cleaner) in
TurboFan.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1469833005
Cr-Commit-Position: refs/heads/master@{#32220}
Makes it possible for the the inline allocation observers to be sample the
actual object allocation on which the notification triggers.
R=hpayer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1460063006
Cr-Commit-Position: refs/heads/master@{#32209}
Put the constant parts of the CreateLiteralArray and CreateLiteralObject
operators into CreateLiteralParameters and properly use them everywhere.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1475613002
Cr-Commit-Position: refs/heads/master@{#32207}
This patch removes Promise functions and methods which are absent
from the ES2015 specification when the --es-staging flag is on.
BUG=v8:3237
R=rossberg
LOG=Y
Review URL: https://codereview.chromium.org/1469543003
Cr-Commit-Position: refs/heads/master@{#32194}
In a function expression, 'yield' is allowed, even if the expression
occurs inside a generator. Similarly, even in a non-generator,
a generator expression's name must not be 'yield'.
BUG=v8:3983
LOG=n
Review URL: https://codereview.chromium.org/1460393003
Cr-Commit-Position: refs/heads/master@{#32188}
This simplifies the layout of dependent code array and optimizes it for sparse dependency groups.
BUG=chromium:554488
LOG=NO
Review URL: https://codereview.chromium.org/1435313002
Cr-Commit-Position: refs/heads/master@{#32170}
We should not be counting the bump pointer allocations done during scavenge as
the objects are copied. The inline allocation observers were getting unnecessary
notifications.
R=hpayer@chromium.org, ulan@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1465633002
Cr-Commit-Position: refs/heads/master@{#32153}
* Adds a PrepareForTailCall instruction that bumps the stack in the case that
the number of parameters passed to the callee causes the stack to exceed the
calleer's frame size.
* Uses the gap resolver to move the saved caller return address and frame
pointer to the approprate location in the tail-called frame.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1455833004
Cr-Commit-Position: refs/heads/master@{#32151}
This change introduces register re-mapping to avoid assignment hazards
in binary expressions. Expressions that cause problems typically have
the form y = x + (x = 4);. The problem occurs because the lhs value
evaluates to the register holding x. The rhs updates that register and
then applying the operation would use the new value as the lhs.
By tracking loads and stores in binary expressions the generator is now
able to detect when condition occurs and uses a temporary register for
the rhs value. When the binary expression evaluation is complete the
variable is updated with the latest temporary.
A new bytecode Mov performs this update without touching the
accumulator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412683011
Cr-Commit-Position: refs/heads/master@{#32141}
Adds support for the New, CallRuntime and CallJSRuntime bytecodes in
BytecodeGraphBuilder. Also adds BuildLoadObjectField,
BuildLoadGlobalObject and BuildLoadNativeContextField helpers.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456483002
Cr-Commit-Position: refs/heads/master@{#32136}
The TruncateFloat64ToUint64 operator converts a float64 to an uint64 using
round-to-zero rounding mode (truncate). If the input value is outside uint64
range, then the result depends on the architecture. I provide an implementation for x64 and arm64.
@v8-ppc-ports and @v8-mips-ports, can you do the implementations for ppc64 and mips64?
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1457373002
Cr-Commit-Position: refs/heads/master@{#32127}
Following logic is using for getting function name in JSFunction::GetDebugName:
1. if function has displayName and its type is string then use it
2. if function has defined property Function.name as value and its type string then use it
3. otherwise use SharedFunctionInfo::DebugName as functionName.
JSFunction::GetDebugName is exposed in V8 API and in FunctionMirror interface.
BUG=chromium:17356
R=yangguo@chromium.org,mstarzinger@chromium.org
LOG=Y
Review URL: https://codereview.chromium.org/1449473005
Cr-Commit-Position: refs/heads/master@{#32124}
Fixing failures in cctest/test-assembler-mips/CVT on Mips32R2 without
FP64 support
BUG=
Review URL: https://codereview.chromium.org/1459763003
Cr-Commit-Position: refs/heads/master@{#32121}
This adds an explicit parameter to the call descriptor having kind
kJSCallFunction representing the new.target value. Note that for now
this parameter is not yet passed in and hence cannot be used yet. Also
contains some refactoring of how parameter index value are calculated,
establishing Linkage as the central point for such index computations.
This is a preparatory CL to allows us passing new.target in a register
instead of via a side-channel through the construct stub frame.
R=bmeurer@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1461973002
Cr-Commit-Position: refs/heads/master@{#32112}
The ChangeFloat64ToInt64 operator changes the representation of a
float64 input value to int64 if the input value can be represented
exactly on int64. Otherwise the result is currently undefined.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1455983002
Cr-Commit-Position: refs/heads/master@{#32102}
We currently assume that all prototype maps are stable, which is
not guaranteed for certain keyed access patterns. So we explicitly
disallow optimizing the element access there for now.
BUG=chromium:557807, v8:4470
R=jarin@chromium.org
LOG=n
Review URL: https://codereview.chromium.org/1456973004
Cr-Commit-Position: refs/heads/master@{#32101}
This is in preparation for the addition of --harmony-destructuring-assignment.
BUG=v8:811
LOG=n
Review URL: https://codereview.chromium.org/1450193002
Cr-Commit-Position: refs/heads/master@{#32098}
Now that we no longer require AllocationInfo::limit to be aligned [1], we can do
more accurate inline-allocation-observation. This lets us get notified when the
next allocation that crosses the step-size boundary is allocated.
Fixed the test-cases. They make significantly more sense now given the step
sizes and the number of times we get notifications. For example, with a step
size of 512, an allocation of 16kb results in 32 notifications instead of 30
now.
[1] https://codereview.chromium.org/1444883003R=hpayer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1448913003
Cr-Commit-Position: refs/heads/master@{#32091}
This fixes undefined behavior with the OpParameter helper in some of our
node matchers. There was a constness mismatch of the template parameter.
R=oth@chromium.org,mythria@chromium.org
Review URL: https://codereview.chromium.org/1453973004
Cr-Commit-Position: refs/heads/master@{#32087}
When adding properties to the result object, that object's prototype chain should be ignored.
Review URL: https://codereview.chromium.org/1458873002
Cr-Commit-Position: refs/heads/master@{#32085}
This fixes the array literal expression stack tracking in the presence
of spread expressions. Deoptimization within a spread expression was
borked.
R=bmeurer@chromium.org
TEST=mjsunit/regress/regress-deopt-in-array-literal-spread
Review URL: https://codereview.chromium.org/1455953002
Cr-Commit-Position: refs/heads/master@{#32079}
...based on the 2-lock algorithm by M. Scott and M. Michael (1992).
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1448283004
Cr-Commit-Position: refs/heads/master@{#32078}
If the input type does not help us, we are conservative and truncate (rather than guessing signed).
Review URL: https://codereview.chromium.org/1455103002
Cr-Commit-Position: refs/heads/master@{#32075}
With do-expressions any expression used within literals can turn into an
OSR entry-point. This means the literal object being constructed is then
renamed to an OSR value and needs to be reloaded from the environment.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-osr-in-literal
Review URL: https://codereview.chromium.org/1453733002
Cr-Commit-Position: refs/heads/master@{#32050}
Adds support for the LdaGlobal and StaGlobal bytecodes to the
BytecodeGraphBuilder. Also fixes a bug in the context node's parameter
index and start node inputs.
Landed on behalf of rmcilroy.
TBR=bmeuer@chromium.org,mythria@chromium.org
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1449373002
Cr-Commit-Position: refs/heads/master@{#32049}
With do-expressions any expression used within literals can turn into an
OSR entry-point. This means the literal object being constructed is then
renamed to an OSR value and needs to be reloaded from the environment.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-osr-in-literal
Review URL: https://codereview.chromium.org/1452193003
Cr-Commit-Position: refs/heads/master@{#32048}
With do-expressions any expression used within literals can turn into an
OSR entry-point. This means the literal object being constructed is then
renamed to an OSR value and needs to be reloaded from the environment.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-osr-in-literal
Review URL: https://codereview.chromium.org/1451423002
Cr-Commit-Position: refs/heads/master@{#32047}
Several changes are included here:
1. Each resolution callback references shared data indicating whether
it has already been resolved or not, as described in 25.4.1.3
http://tc39.github.io/ecma262/#sec-createresolvingfunctions.
Previously this was handled exclusively by the Promise's status,
which does not work correctly with the current chaining behaviour.
2. During fulfillment, When a Promise is resolved with a thenable, the
spec chains the promises together by invoking the thenable's `then`
function with the original Promise's resolve and reject methods (per
section 25.4.2.2, or
http://tc39.github.io/ecma262/#sec-promiseresolvethenablejob, on the
next tick, regardless of whether or not there are pending tasks.
3. Adds a spec compliance fix to ensure that the Promise constructor
is only loaded once when `then()` is called, solving v8:4539 as well.
This involves refactoring PromiseChain to accept a constructor
argument. PromiseChain/PromiseDeferred will hopefully be removed soon,
simplifying the process.
BUG=v8:4162, v8:4539, v8:3237
LOG=N
R=rossberg@chromium.org, littledan@chromium.org, adamk@chromium.org
Review URL: https://codereview.chromium.org/1394463003
Cr-Commit-Position: refs/heads/master@{#32046}
Adds support for visiting the Call bytecode to the bytecode graph builder.
This change also adds the call type feedback slot to the Call bytecode.
This is not currently used by the interpreter, but is used by the
graph builder.
Also adds a CallWide varient of the Call bytecode, and adds the kCount16
operand type.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456453002
Cr-Commit-Position: refs/heads/master@{#32033}
Adds implementation and tests for following operators in bytecode graph builder:
-VisitLoadICSloppy
-VisitLoadICStrict
-VisitLoadICSloppyWide
-VisitLoadICStrictWide
The current implementation introduces empty frame states for frame state inputs expected by these operations.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419373007
Cr-Commit-Position: refs/heads/master@{#32026}
This is the first part to refactoring the JSNativeContextSpecialization
class, which has grown way too big recently.
Also don't collect cross context feedback for the CallIC in general.
Neither TurboFan nor Crankshaft can make any use of cross context
JSFunction feedback that is collected by the CallIC, so there's no
point in gathering that feedback at all (it just complicates the
checking that is necessary in the compilers). What we should do
instead at some point (when Crankshaft becomes less important) is
to collect the SharedFunctionInfo as feedback for those cases.
R=yangguo@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1451273002
Cr-Commit-Position: refs/heads/master@{#32022}
- Removed PASS/FAIL line for arrow/rest params test which should now pass.
- Moved soon-to-be-changed tests about built-in prototypes as plain objects
to INVALID section (and noted that they'll be fixed with the
next test262 roll).
R=littledan@chromium.org
Review URL: https://codereview.chromium.org/1450243002
Cr-Commit-Position: refs/heads/master@{#32020}
The TiesEven rounding mode rounds float64 numbers to the nearest
integer. If there are two nearest integers, then the number is rounded
to the even one. This is the default rounding mode according to
IEEE~754.
I implemented the operator on ia32, x64, arm, arm64, mips, and mips64.
I think there is a bug in the current implementation of the ppc
simulator, which kept me from implementing the operator on ppc.
According to my understanding of the ppc instruction manual, the FRIN
instruction provides the right behavior for Float64RoundTiesEven. In the
simulator, however, FRIN provides a different semantics. If there are
two nearest integers, then the simulator returns the one which is
further away form 0.
Review URL: https://codereview.chromium.org/1440293002
Cr-Commit-Position: refs/heads/master@{#32005}
This change binds each {Cancelable} task to a so-called {CancelableTaskManager},
which is then used to handle concurrent cancelation as well as synchronizing
shutdown for already running tasks. Since ownership of tasks is transferred to
the platform executing a task (destructor), handling in the manager uses integer
ids. Note that this also mitigates (modulo integer size) the ABA problem.
All handling of {Cancelable} tasks is now encapsulated into the corresponding
manager, which is instantiated for each isolate.
R=hpayer@chromium.org
BUG=chromium:524425
LOG=N
CQ_EXTRA_TRYBOTS=tryserver.v8:v8_linux_arm64_gc_stress_dbg;tryserver.v8:v8_linux_gc_stress_dbg;tryserver.v8:v8_mac_gc_stress_dbg;tryserver.v8:v8_linux64_msan_rel;tryserver.v8:v8_linux64_tsan_rel;tryserver.v8:v8_mac64_asan_rel
Review URL: https://codereview.chromium.org/1409993012
Cr-Commit-Position: refs/heads/master@{#31997}
The previous code did not properly check for harmony const when
doing the dynamic redeclaration check. This was masked in the
test because each eval had an initializer, and the initializer was what
triggered the exception.
This patch tightens the test by removing initializers and fixes the bug in
DeclareLookupSlot.
Also change the test to use assertThrows where possible.
BUG=v8:4550
LOG=n
Review URL: https://codereview.chromium.org/1437003006
Cr-Commit-Position: refs/heads/master@{#31995}
* Limit triggering of tail calls to explicit use of a new inline runtime
function %_TailCall. %_TailCall works just like %_Call except for using
tail-calling mechanics (currently only in TF).
* Remove hack that recognized some specific usages of %_Call and converted them
into tail calls.
* Support tail calls for all calls where the number of callee stack parameters
is less than or equal to the number of caller stack parameters.
* Use the gap resolver to swizzle parameters and registers to tail calls.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1439613003
Cr-Commit-Position: refs/heads/master@{#31987}
With do-expressions any expression used as a case label can turn into an
OSR entry-point. This means the value being switched over is renamed to
an OSR value and needs to be reloaded from the environment at each case.
R=rossberg@chromium.org
TEST=mjsunit/regress/regress-osr-in-case-label
Review URL: https://codereview.chromium.org/1438123007
Cr-Commit-Position: refs/heads/master@{#31986}
Adds an optimization to omit generating Ldar/Star if the same register
is loaded or stored from the accumulator in the earlier instruction.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1435283002
Cr-Commit-Position: refs/heads/master@{#31984}
This makes sure that inlining a constructor call to a function which
cannot be used as a constructor (e.g. strong mode function) still does
throw correctly when the implicit receiver is created.
R=bmeurer@chromium.org
TEST=mjsunit/regress/regress-inline-strong-as-construct
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1447443002
Cr-Commit-Position: refs/heads/master@{#31982}
This aligns the naming of "new target" with the spec text throughout
TurboFan and the stack frame walker. The goal is to avoid unnecessary
confusion for people familiar with the spec.
R=verwaest@chromium.org
Review URL: https://codereview.chromium.org/1442643002
Cr-Commit-Position: refs/heads/master@{#31978}
This is necessary to allow more optimizations to take place between
the representation inference and change lowering. Perhaps we want
to rename SimplifiedLowering -> RepresentationInference and
ChangeLowering -> SimplifiedLowering.
Review URL: https://codereview.chromium.org/1439473003
Cr-Commit-Position: refs/heads/master@{#31976}
The least significant bit of the input value may affect the result of
the conversion through rounding. We OR the least significant with the
second least significant bit to preserve it over the SHR instruction.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1435203003
Cr-Commit-Position: refs/heads/master@{#31969}
This adds initial support for fast inline allocations of JSObject
instances. It currently has exactly the same limitations as Crankshaft.
R=mstarzinger@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1441573004
Cr-Commit-Position: refs/heads/master@{#31957}
This passes both, the actual constructor and the original constructor,
to nodes having the {JSCreate} operator. This is required for allocating
properly subclassed implicit receiver objects.
R=verwaest@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1434873004
Cr-Commit-Position: refs/heads/master@{#31955}
This implements a first version of support for constructor call inlining
in the inlining machinery. For now we can only inline calls where the
actual constructor and the original constructor coincide (i.e. no super
constructor calls). Note that the target of a super constructor call is
loaded with a runtime call, so there is no way for it to be constant
promoted at the moment.
R=bmeurer@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1435873002
Cr-Commit-Position: refs/heads/master@{#31954}
Presently the inline allocation step is a static value defined to be the minimum
of the step sizes over all the observers. The step occur every (approx.) step
byte. This is unfair to observers whose steps are not evenly divisible by the
min step size. For example, consider two observers with steps sizes of 512 and
576 bytes. Across 16kb allocated, you would expect the first observer to be hit
approximately 32 times, and the second observer to be hit approximately 28
times.
In reality, the observers get notified 30 and 15 times respectively. The reason
is that each step is 512 bytes, and since 576 is not evenly divisible by 512,
it gets notified much less frequently.
This CL fixes the problem by making the next step size be the minimum (over all
observers) of the remaining bytes to get to the step, making the steps fair.
BUG=
R=hpayer@chromium.org,ulan@chromium.org
Review URL: https://codereview.chromium.org/1427973006
Cr-Commit-Position: refs/heads/master@{#31948}
Popcnt is implemented as an optional operator, which is only implementd by x64
at the moment.
Review URL: https://codereview.chromium.org/1424173006
Cr-Commit-Position: refs/heads/master@{#31928}
Jic and jialc compact branch ops are fixed as they does not have 'forbidden slot' restriction. Also COP1 branches (CTI instructions) added to IsForbiddenAfterBranchInstr().
TEST=cctest/test-disasm-mips/Type0
BUG=
Review URL: https://codereview.chromium.org/1423493006
Cr-Commit-Position: refs/heads/master@{#31922}
Generated code performs distinct floating multiply and add/subtract
operations. Tests fail when GCC uses fmadd/fmsub to calculate the
expected result since these instructions provide higher accuracy due
to the lack of an intermediate round.
R=machenbach@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1416123007
Cr-Commit-Position: refs/heads/master@{#31918}
This patch extends the typed lowering with a specialized version of 'instanceof' that is used if the "class", i.e. the constructor function, is a known constant.
Unittests check that replacement occurs as intended. Functional correctness is ensured by extensive unit tests covering instanceof already in the testsuite.
TESTS=unittests/JSTypedLoweringTest.{JSInstanceOfSpecializationWithSmiCheck,JSInstanceOfSpecializationWithoutSmiCheck,JSInstanceOfNoSpecialization}
Review URL: https://codereview.chromium.org/1407413014
Cr-Commit-Position: refs/heads/master@{#31916}
RegExp.prototye[@@split] is not yet implement to spec regarding creating
new RegExp object with the SpeciesConstructor.
R=littledan@chromium.org
BUG=v8:4345
LOG=N
Review URL: https://codereview.chromium.org/1427573005
Cr-Commit-Position: refs/heads/master@{#31911}
Reason for revert: failed tests on a Windows build.
TBR=rossberg,cbruni,neis
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1426943007
Cr-Commit-Position: refs/heads/master@{#31907}
I improved the tests for Word32Clz, Word32Ctz, and Word32Popcnt, and ported
some tests to the BufferedRawMachineAssemblerTester.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1437493002
Cr-Commit-Position: refs/heads/master@{#31896}
Remove some non-standard code that doesn't do anything anyways.
While FireFox uses this to set the default value for the multiline flag,
it is nonstandard and slated for removal. The matching behaviour has
never been implemented in either JSC or V8, so there is little
web-compat risk.
The only possible risk could be someone depending on the ToBoolean()
behaviour of the flag, but this seems unlikely.
BUG=v8:3870
LOG=N
R=adamk@chromium.org, littledan@chromium.org, yangguo@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1417733012
Cr-Commit-Position: refs/heads/master@{#31882}
While working on frame elision, I wanted to disassemble codegen in the
debugger, as the code generation is progressing. I discovered we had a
"Print" member on the x64 assembler, without any implementation. I
pulled it up to AssemblerBase and gave it an implementation that
should work for the other architectures.
Also checked that ia32, x87, arm and arm64 assemblers didn't have
such an implementation - free Print.
Arm64 has a naming conflict with the v8::internal::Disassembler. I
renamed the arm64 type with a more specific name.
Opportunistically fixed a bug in the name converter. This debug-time
printer doesn't provide a Code object, which should be OK with the
name converters, by the looks of other APIs there. All this means is that
when using the Print() API, we just get addresses dumped without any
context (like what this address may be - a stub maybe, etc). This seems
fine for the scenario.
There may be other places that assume a Code object. Since this is
a diagnostics-only scenario, for codegen developers, I feel it is
reasonable to fix such other places as we find them.
Review URL: https://codereview.chromium.org/1431933003
Cr-Commit-Position: refs/heads/master@{#31869}
JSRegExp's properties backing stores must not be shared.
BUG=chromium:548580
LOG=N
Review URL: https://codereview.chromium.org/1429743006
Cr-Commit-Position: refs/heads/master@{#31867}
Use compare-negate instruction if the right-hand input to a compare is a
negate operation.
BUG=
Review URL: https://codereview.chromium.org/1410123009
Cr-Commit-Position: refs/heads/master@{#31866}
Adds a blacklist of tests which are currently unsupported or broken in Ignition to
the mjsunit and test262 test status.
Also removes --ignition-script-filter flag, and adds a
--ignition_fallback_on_eval_and_catch flag which fallsback to fullcodegen for
functions which call eval or contain a catch block.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1420963009
Cr-Commit-Position: refs/heads/master@{#31864}
This fixes a corner case where optimized code could still be reachable
through the optimized code map, even though unoptimized code for any
inlined function might have long been flushed.
R=ulan@chromium.org
TEST=cctest/test-heap/Regress513496
BUG=chromium:513496
LOG=n
Review URL: https://codereview.chromium.org/1415683011
Cr-Commit-Position: refs/heads/master@{#31857}
We forgot to add the number of arguments parameter in
JSFrameSpecialization, which was added before the context.
R=jarin@chromium.org
BUG=chromium:552304
LOG=n
Review URL: https://codereview.chromium.org/1429233004
Cr-Commit-Position: refs/heads/master@{#31856}
Adds a test that the receiver for sloppy mode functions is replaced with
the global proxy when called with an undefined receiever.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410113008
Cr-Commit-Position: refs/heads/master@{#31854}
This change does not change how the BufferedRawMachineAssemblerTester is
used in tests, but it makes its construction in other constructors (e.g.
in the WasmRunner) cleaner.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1414203009
Cr-Commit-Position: refs/heads/master@{#31850}
It was originally shipped in https://crrev.com/eef2b9b09723ba1dae3ec0172341e93e9030ada0,
but was reverted due to poor interaction with Blink.
That interaction seems to be fixed thanks to changes to the V8 API
and to @@toStringTag handling on access-checked objects.
BUG=v8:3502
LOG=y
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.v8:v8_linux_nosnap_rel;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1406293011
Cr-Commit-Position: refs/heads/master@{#31846}
On MIPS arch, all memory accesses (including halfword)
must be aligned to their native size or an alignment exception occurs.
The kernel will fix this up, but with performance penalty.
TEST=test-bytecode-generator/CallRuntime
BUG=
Review URL: https://codereview.chromium.org/1423373004
Cr-Commit-Position: refs/heads/master@{#31845}
Since enabling destructuring already implies enabling default parameters,
there's not a good way to separate these two. Luckily, they're both
feature-complete (save for destructuring assignment).
This causes us to pass an additional 24 test262 tests.
BUG=v8:811, v8:2160
LOG=y
Review URL: https://codereview.chromium.org/1407393009
Cr-Commit-Position: refs/heads/master@{#31844}
This patch adds UseCounters for the various language modes. This may
be useful for helping us to prioritize future optimization and
language design decisions.
R=adamk
CC=seththompson
BUG=none
Review URL: https://codereview.chromium.org/1429173002
Cr-Commit-Position: refs/heads/master@{#31841}
This fixes receiver conversion since the Call builtin does it correctly.
BUG=v8:4526
LOG=n
Review URL: https://codereview.chromium.org/1407373007
Cr-Commit-Position: refs/heads/master@{#31823}
The %_CallFunction doesn't implement the call sequence properly, it
doesn't do the receiver wrapping, nor does it check for
classConstructor. Also the eager deoptimization for %_CallFunction was
seriously b0rked (we must have been lucky with TurboFan so far).
R=yangguo@chromium.org
BUG=v8:4413
LOG=n
Review URL: https://codereview.chromium.org/1419813010
Cr-Commit-Position: refs/heads/master@{#31821}
TurboFan didn't fully support the relevant ES6 type conversion
intrinsics like %_ToNumber, %_ToLength, %_ToName, %_ToString and
%_ToInteger until now, we always went to the runtime instead. These
intrinsics are now well supported in TurboFan, and we are even able to
generate quite decent code in some cases.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1428243003
Cr-Commit-Position: refs/heads/master@{#31820}
Fix an earlier regression which forbid non-VariableProxy LHS from being
used in for-of loops. Like for-in loops, the spec allows any LHS to be used,
with the sole exception that ObjectLiterals and ArrayLiterals must be valid
AssignmentPatterns.
Also fixes a bug in TurboFan which resulted in incorrectly replacing a variable load with a constant value in some instances, due to the AstLoopAssignmentAnalyzer failing to record the assignment to ForOfStatement's value.
BUG=v8:4418, v8:2720
LOG=N
R=wingo@igalia.com, littledan@chromium.org, adamk@chromium.org, bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1411873004
Cr-Commit-Position: refs/heads/master@{#31816}
Expose the steps for incremental marking and idle scavenge more directly in
NewSpace. Adjust the NewSpace and Heap interfaces to allow callers to be more
clear about how they are interacting with inline allocation steps. This refactor
prepares the ground for more consumers of inline allocation steps (e.g. sampling
heap profiler.)
R=hpayer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1404523002
Cr-Commit-Position: refs/heads/master@{#31814}
This patch moves ES2015 ToLength semantics on array operations, etc
to from staging to shipping.
R=adamk
BUG=v8:3087
LOG=Y
Review URL: https://codereview.chromium.org/1433473003
Cr-Commit-Position: refs/heads/master@{#31810}
The CL https://codereview.chromium.org/1409013004 added / changed some test cases.
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result
check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function, those inlined
functions has different behavior comparing with GCC ia32 build and x87 build. The major
difference is sse float register still has single precision rounding semantic. While X87
register has no such rounding precsion semantic when directly use register value. The V8
turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type case to keep the same precision.
float expect = *i * *j; // *i + *j, etc.
For test case "RunFloat64MulAndFloat64Add1 / RunFloat64MulAndFloat64Add2 / RunFloat64MulAndFloat64Sub1
/ RunFloat64MulAndFloat64Sub2", the expected result calcaulated by GCC has difference precsion
when comparing with V8 turbofan result for X87 platform. (Turbofan X87 result is the same as
IA32 GCC and IA32 Turbofan). So we have to disable those four cases for X87 port.
BUG=
Review URL: https://codereview.chromium.org/1430943002
Cr-Commit-Position: refs/heads/master@{#31808}
This deprecates the ability of the raw machine assembler to utilize the
CallFunctionStub in preparation of the stub itself being deprecated. We
only used this to test instruction selection of calls to stubs that can
deoptimize, the test has been adapted.
R=verwaest@chromium.org
TEST=unittests/InstructionSelectorTest
Review URL: https://codereview.chromium.org/1408193006
Cr-Commit-Position: refs/heads/master@{#31799}
Reason for revert:
MSAN errors on arm64: http://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/builds/5123/
Original issue's description:
> [es6] Implement destructuring binding in try/catch
>
> The approach is to desugar
>
> try { ... }
> catch ({x, y}) { ... }
>
> into
>
> try { ... }
> catch (.catch) {
> let x = .catch.x;
> let y = .catch.y;
> ...
> }
>
> using the PatternRewriter's normal facilities. This has the side benefit
> of throwing the appropriate variable conflict errors for declarations
> made inside the catch block.
>
> No change is made to non-destructured cases, which will hopefully save
> us some work if https://github.com/tc39/ecma262/issues/150 is adopted
> in the spec.
>
> There's one big problem with this patch, which is a lack of PreParser
> support for the redeclaration errors. But it seems we're already lacking
> good PreParser support for such errors, so I'm not sure that should
> block this moving forward.
>
> BUG=v8:811
> LOG=y
>
> Committed: https://crrev.com/a316db995e6e4253664920652ed4e5a38b2caeba
> Cr-Commit-Position: refs/heads/master@{#31797}
TBR=rossberg@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:811
Review URL: https://codereview.chromium.org/1408063013
Cr-Commit-Position: refs/heads/master@{#31798}
The approach is to desugar
try { ... }
catch ({x, y}) { ... }
into
try { ... }
catch (.catch) {
let x = .catch.x;
let y = .catch.y;
...
}
using the PatternRewriter's normal facilities. This has the side benefit
of throwing the appropriate variable conflict errors for declarations
made inside the catch block.
No change is made to non-destructured cases, which will hopefully save
us some work if https://github.com/tc39/ecma262/issues/150 is adopted
in the spec.
There's one big problem with this patch, which is a lack of PreParser
support for the redeclaration errors. But it seems we're already lacking
good PreParser support for such errors, so I'm not sure that should
block this moving forward.
BUG=v8:811
LOG=y
Review URL: https://codereview.chromium.org/1417483014
Cr-Commit-Position: refs/heads/master@{#31797}
Use the Call builtin instead, which does the right thing(TM)
always, especially since the CallFunctionStub is going away.
R=jarin@chromium.org
BUG=v8:4413
LOG=n
Review URL: https://codereview.chromium.org/1410853007
Cr-Commit-Position: refs/heads/master@{#31794}
This removes several methods from JSFunction that just delegate to
SharedFunctionInfo. These methods are especially dangerous when they
hide the fact that they potentially affect all function instances
deriving from the same underlying SharedFunctionInfo.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1417213005
Cr-Commit-Position: refs/heads/master@{#31792}
