Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memcpy also apply to mempcpy and memmove
where they share code. Optimizations for memset also apply
to bzero as they share code.
For memcpy/mempcpy/memmove, performance comparison with niagara4 code:
Long word aligned data
0-127 bytes - minimal changes
128-1023 bytes - 7-30% gain
1024+ bytes - 1-7% gain (in cache); 30-100% gain (out of cache)
Word aligned data
0-127 bytes - 50%+ gain
128-1023 bytes - 10-200% gain
1024+ bytes - 0-15% gain (in cache); 5-50% gain (out of cache)
Unaligned data
0-127 bytes - 0-70%+ gain
128-447 bytes - 40-80%+ gain
448-511 bytes - 1-3% loss
512-4096 bytes - 2-3% gain (in cache); 0-20% gain (out of cache)
4096+ bytes - ± 3% (in cache); 20-50% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memcpy-memmove-niagara7 and memmove-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdeps_routines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-memmove-niagara7.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __memcpy_niagara7, __mempcpy_niagara7,
and __memmove_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h (IFUNC_SELECTOR):
Add niagara7 option.
* sysdeps/sparc/sparc64/multiarch/memmove.c: New file.
* sysdeps/sparc/sparc64/multiarch/ifunc-memmove.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-memmove-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memmove-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/rtld-memmove.c: Likewise.
Tested in sparcv9-*-* and sparc64-*-* targets in both non-multi-arch and
multi-arch configurations.
* sysdeps/sparc/sparc32/sparcv9/memmove.S: New file.
* sysdeps/sparc/sparc32/sparcv9/rtld-memmove.c: Likewise.
* sysdeps/sparc/sparc64/memmove.S: Likewise.
* sysdeps/sparc/sparc64/rtld-memmove.c: Likewise.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds support for the ADP (also known as adi) hardware
capability, as reported by the kernel sparc port when running on M7
machines.
Tested in both sparcv9-*-* and sparc64-*-* targets.
* sysdeps/sparc/bits/hwcap.h (HWCAP_SPARC_ADP): Defined.
* sysdeps/sparc/dl-procinfo.c: Added "adp" to the
_dl_sparc_cap_flags array.
* sysdeps/sparc/dl-procinfo.h (_DL_HWCAP_COUNT): Increment.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Now that all SPARC ifunc converted to C implementation there is no need
for both C and assembly macros. This patch removes the assembly ones.
Checked on sparcv9-linux-gnu and sparc64-linux-gnu.
* sysdeps/sparc/sparc-ifunc.h (SPARC_ASM_IFUNC_DFLT,
SPARC_ASM_IFUNC1, SPARC_ASM_IFUNC2, SET, SPARC_ASM_VIS2_IFUNC,
SPARC_ASM_VIS3_IFUNC, SPARC_ASM_VIS3_VIS2_IFUNC): Remove macros.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_nearbyint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_nearbyintf-generic and
s_nearbyint-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-generic.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.c:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S: Remove
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S:
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_rint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_rintf-generic and s_rint-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_llrint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_llrintf-generic and s_llrint-generic.
* sysdeps/sparc/sparcv9/fpu/multiarch/s_llrint-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_fabs{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_fabsf-generic and s_fabs-generic.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs-generic.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc32 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_copysign{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
(sysdep_calls): New rule.
(sysdep_routines): Use sysdep_calls as base.
(libm-sysdep_routines): Add generic rule for symbols shared with
libc. Add s_copysign-generic and s_copysign-generic objects.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign-generic.S:
New file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf-generic.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
add_n-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add add_n-generic.
* sysdeps/sparc/sparc64/multiarch/add_n-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/add_n.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/add_n.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
submul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add submul_1-generic.
* sysdeps/sparc/sparc64/multiarch/submul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/submul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
addmul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add addmul_1-generic.
* sysdeps/sparc/sparc64/multiarch/addmul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/addmul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
sub_n-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add sub_n-generic.
* sysdeps/sparc/sparc64/multiarch/sub_n-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/sub_n.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
mul_1-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdep_routines):
Add mul_1-generic.
* sysdeps/sparc/sparc64/multiarch/mul_1-generic.S: New file.
* sysdeps/sparc/sparc64/multiarch/mul_1.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The sparc32/sparcv9/fpu/multiarch implementations of llrint / llrintf
have aliases lllrint / lllrintf. No such function is exported from or
used in libm and these aliases should not be there; I expect they
arose accidentally in the course of converting a 64-bit implementation
(where lrint and llrint can be aliases) to a 32-bit llrint
implementation. This patch removes those spurious aliases.
Tested (compilation only) with build-many-glibcs.py for
sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S
(__lllrint): Remove alias.
(lllrint): Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S
(__lllrintf): Likewise.
(lllrintf): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes sparc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py for all its sparc configurations that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/sparc/sparc32/fpu/s_copysignf.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/fpu/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysignf.S:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.c: Include
<libm-alias-float.h>.
(fdimf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf.S:
Include <libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_lrintf.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf.c: Include
<libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.c: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.c: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.c: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_copysignf.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_fabsf.c: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_lrintf.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
(llrintf): Likewise.
* sysdeps/sparc/sparc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/sparc/sparc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes sparc libm function implementations use
libm_alias_double to define function aliases (with consequent
simplification where compat symbol handling is now done by those
macros rather than locally in architecture-specific code).
Tested with build-many-glibcs.py for all its sparc configurations that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/sparc/sparc32/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc32/fpu/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S:
Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Include
<libm-alias-double.h>.
(fdim): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint.S:
Include <libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fabs.S: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma.c: Include
<libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.c: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.c: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.c: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_fabs.c: Include
<libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
(llrint): Likewise.
* sysdeps/sparc/sparc64/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/sparc/sparc64/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
The --disable-multi-arch case of sparcv9 libm is missing a fabsl
compat symbol for when long double had the same ABI as double. This
patch adds the missing compat symbol to this implementation. As my
fix for other instances of this missing compat symbol postdates the
last release, I'm considering this as being part of bug 22229 that was
missing from my previous fix rather than as a separate issue, and so
as not needing a new bug report in Bugzilla.
Tested (compilation only) with build-many-glibcs.py for
sparcv9-linux-gnu --disable-multi-arch.
[BZ #22229]
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fabs.S: Include
<math_ldbl_opt.h>.
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_rint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_rintf-generic and s_rint-generic
objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_rintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_lrint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_lrint-generic and s_lrint-generic
objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_lrintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_nearbyint{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
(libm-sysdep_routines): Add s_nearbyint-generic and
s_nearbyintf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyint.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_nearbyintf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_finite{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add s_finitef-generic and s_finite-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finite.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_finitef.S: Remove file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
s_isinf{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add isinff-generic and s_isinf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinf.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isinff.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
(s_isnan{f}-generic.S).
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdeps_calls):
Add s_isnanf-generic and s_isnan-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan-generic.S: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnan.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_isnanf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactors the sparc64 ifunc selector to a C implementation.
Also, the generic symbol is moved to its own implementation file
(s_signbit{f}-generic.S).
It also simplifies the multiarch Makefile by moving the common objects
from libm-sysdeps_routines and sysdeps_routines to a new sysdeps_call
rule and including it where required with the correct prefix.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc-ifunc.h (sparc_libm_ifunc_redirected): New
macro.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile (sysdep_calls): New
rule.
(sysdep_routines): Use sysdep_calls as base.
(libm-sysdep_routines): Add generic rule for symbols shared with
libc. Add s_signbit-generic and s_signbitf-generic objects.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf-generic.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S: Remove file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch assumes VIS3 support by binutils, which is supported since
version 2.22. This leads to some code simplification, mostly on
multiarch build where there is only one variant instead of previously
two (whether binutils supports VIS3 instructions or not).
For multiarch files where HAVE_AS_VIS3_SUPPORT was checked and
the default implementation was built with a different name, a new
file with (implementation with -generic appended) is added.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
* config.h.in (HAVE_AS_VIS3_SUPPORT): Remove check for VIS3 support.
* sysdeps/sparc/configure.ac (HAVE_AS_VIS3_SUPPORT): Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c: Likewise.
* sysdeps//sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h [!HAVE_AS_VIS3_SUPPORT]
(SPARC_ASM_VIS3_IFUNC, SPARC_ASM_VIS3_VIS2_IFUNC): Remove macros.
* sysdeps/sparc/sparc32/sparcv9/Makefile [$(have-as-vis3) != yes]
(ASFLAGS.o, ASFLAGS-.os, ASFLAGS-.op, ASFLAGS-.oS): Remove rules.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
($(have-as-vis3) == yes): Remove conditional.
* sysdeps/sparc/sparc64/Makefile (($(have-as-vis3) == yes)):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma-generic.c: New
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fmaf-generic.c: New
file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fma-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_fmaf-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-generic.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-generic.c: New file.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch refactor the SPARC64 ifunc selector to a C implementation.
The x86_64 implementation is used as default, which resulted in common
definitions (ifunc-init.h) used on both architectures. No functional
change is expected, including ifunc resolution rules.
Checked on sparc64-linux-gnu, sparcv9-linux-gnu and x86_64-linux-gnu.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy-ultra1.S: New
file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-memcpy.h: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy-ultra1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/memcpy.c: Likewise.
* sysdeps/sparc/sparc64/multiarch/mempcpy.c: Likewise.
* sysdeps/sparc/sparc-ifunc.h (sparc_libc_ifunc_redirected): New
macro.
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
[$(subdir) = string] (sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/Makefile [$(subdir) = string]
(sysdep_routines): Add memcpy-ultra1.
* sysdeps/sparc/sparc64/multiarch/memcpy.S: Remove file.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memcpy.S: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
sysdeps/sparc/sparc64/soft-fp has files s_frexpl.c, s_scalblnl.c and
s_scalbnl.c that are never used because the ldbl-128 versions always
come first in the sysdeps directory ordering. This patch removes the
unused files.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged by this patch.
* sysdeps/sparc/sparc64/soft-fp/s_frexpl.c: Remove file.
* sysdeps/sparc/sparc64/soft-fp/s_scalblnl.c: Likewise.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c: Likewise.
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new build test to check for internal fields
offsets for user visible internal field. Although currently
the only field which is statically initialized to a non zero value
is pthread_mutex_t.__data.__kind value, the tests also check the
offset of __kind, __spins, __elision (if supported), and __list
internal member. A internal header (pthread-offset.h) is added
to each major ABI with the reference value.
Checked on x86_64-linux-gnu and with a build check for all affected
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu,
mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu,
s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu,
sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32,
tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32).
* nptl/pthreadP.h (ASSERT_PTHREAD_STRING,
ASSERT_PTHREAD_INTERNAL_OFFSET): New macro.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time
checks for internal pthread_mutex_t offsets.
* sysdeps/aarch64/nptl/pthread-offsets.h
(__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET,
__PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET,
__PTHREAD_MUTEX_LIST_OFFSET): New macro.
* sysdeps/alpha/nptl/pthread-offsets.h: Likewise.
* sysdeps/arm/nptl/pthread-offsets.h: Likewise.
* sysdeps/hppa/nptl/pthread-offsets.h: Likewise.
* sysdeps/i386/nptl/pthread-offsets.h: Likewise.
* sysdeps/ia64/nptl/pthread-offsets.h: Likewise.
* sysdeps/m68k/nptl/pthread-offsets.h: Likewise.
* sysdeps/microblaze/nptl/pthread-offsets.h: Likewise.
* sysdeps/mips/nptl/pthread-offsets.h: Likewise.
* sysdeps/nios2/nptl/pthread-offsets.h: Likewise.
* sysdeps/powerpc/nptl/pthread-offsets.h: Likewise.
* sysdeps/s390/nptl/pthread-offsets.h: Likewise.
* sysdeps/sh/nptl/pthread-offsets.h: Likewise.
* sysdeps/sparc/nptl/pthread-offsets.h: Likewise.
* sysdeps/tile/nptl/pthread-offsets.h: Likewise.
* sysdeps/x86_64/nptl/pthread-offsets.h: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Normally, TLS relocations against local symbols are optimised by the linker
to be absolute. However, gold does not do this, and so it is possible to
end up with, for example, R_SPARC_TLS_DTPMOD64 referring to a local symbol.
Since sym_map is left as null in elf_machine_rela for the special local
symbol case, the relocation handling thinks it has nothing to do, and so
the module gets left as 0. Havoc then ensues when the variable in question
is accessed.
Before this fix, the main_local_gold program would receive a SIGBUS on
sparc64, and SIGSEGV on powerpc32. With this fix applied, that test now
passes like the rest of them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Assign sym_map to be map for local symbols, as TLS relocations
use sym_map to determine whether the symbol is defined and to
extract the TLS information.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise.
This patch makes SPARC fabsl implementation use libm_alias_ldouble, to
prepare them for also defining _Float128 function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries (sparc64-linux-gnu and sparcv9-linux-gnu) are unchanged by
the patch.
* sysdeps/sparc/sparc32/fpu/s_fabsl.c: Include
<libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
* sysdeps/sparc/sparc64/fpu/s_fabsl.c: Include
<libm-alias-ldouble.h>.
(fabsl): Define using libm_alias_ldouble.
This patch makes dbl-64 fma use libm_alias_double. The ldbl-opt
version is removed. The sparc32 version no longer needs to handle
compat symbols, while alpha needs a new wrapper to avoid getting the
ldbl-128 version (where ldbl-opt is earlier in the list of sysdeps
directories, so previously fma came from there).
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/dbl-64/s_fma.c: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/ieee754/ldbl-opt/s_fma.c: Remove file.
* sysdeps/sparc/sparc32/fpu/s_fma.c: Do not include
<math_ldbl_opt.h>.
(fmal): Do not define as compat symbol here.
* sysdeps/alpha/fpu/s_fma.c: New file.
32-bit SPARC libm should have compat symbols for copysignl
(GLIBC_2.0), fabsl (GLIBC_2.0), fmal (GLIBC_2.1), pointing to the
double functions; they were present in glibc 2.8, for example, but are
now missing, probably when optimized SPARC function implementations
were added without appropriate compat symbol handling. The same
applies to copysignl in libc. This patch restores those compat
symbols.
Tested with build-many-glibcs.py for sparcv9-linux-gnu.
[BZ #22229]
* sysdeps/sparc/sparc32/fpu/s_copysign.S: Include
<math_ldbl_opt.h>
(copysignl): Define as compat symbol at version GLIBC_2_0 for libm
and libc.
* sysdeps/sparc/sparc32/fpu/s_fabs.S: Include <math_ldbl_opt.h>.
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
* sysdeps/sparc/sparc32/fpu/s_fma.c: Include <math_ldbl_opt.h>.
(fmal): Define as compat symbol at version GLIBC_2_1 for libm.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_copysign.S:
Include <math_ldbl_opt.h>
(copysignl): Define as compat symbol at version GLIBC_2_0 for libm
and libc.
(compat_symbol): Undefine and redefine.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fabs.S: Include
<math_ldbl_opt.h>
(fabsl): Define as compat symbol at version GLIBC_2_0 for libm.
(compat_symbol): Undefine and redefine.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fma.c
[HAVE_AS_VIS3_SUPPORT]: Include <math_ldbl_opt.h>.
[HAVE_AS_VIS3_SUPPORT] (fmal): Define as compat symbol at version
GLIBC_2_1 for libm.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Add
GLIBC_2.0 copysignl symbol.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Add
GLIBC_2.0 copysignl and fabsl and GLIBC_2.1 fmal symbols.
Simplify the C99 isgreater macros. Although some support was added
in GCC 2.97, not all targets added support until GCC 3.1. Therefore
only use the builtins in math.h from GCC 3.1 onwards, and defer to
generic macros otherwise. Improve the generic isunordered macro
to use compares rather than call fpclassify twice - this is not only
faster but also correct for signaling NaNs.
* math/math.h: Improve handling of C99 isgreater macros.
* sysdeps/alpha/fpu/bits/mathinline.h: Remove isgreater macros.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h: Likewise.
* sysdeps/powerpc/bits/mathinline.h: Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
glibc fails to build with GCC mainline for SPARC because of the use of
manually-created IFUNCs, which fail the tests of compatibility of
function alias types. This patch changes sparc-ifunc.h to use the
generic __ifunc in defining sparc_libm_ifunc. The generic __ifunc can
use the GCC ifunc attribute when available, so ensuring
type-correctness as well as better debug info than when setting symbol
types in asm statements.
Note that for this to fix the build with GCC mainline the GCC patch
<https://gcc.gnu.org/ml/gcc-patches/2017-09/msg01779.html>, or
building GCC with --enable-gnu-indirect-function, is also needed.
Tested (compilation only) with build-many-glibcs.py (sparc64-linux-gnu
and sparcv9-linux-gnu, with GCC 8 with the above patch, and also with
GCC 7).
* sysdeps/sparc/sparc-ifunc.h [!__ASSEMBLER__] (sparc_libm_ifunc):
Define using __ifunc.
Add unwind info to __libc_start_main so that unwinding continues one
extra level to _start. Similarly add unwind info to backtrace.
Given many targets require this, do this in a general way.
* csu/Makefile: Add -funwind-tables to libc-start.c.
* debug/Makefile: Add -funwind-tables to backtrace.c.
* sysdeps/aarch64/Makefile: Remove CFLAGS-backtrace.c.
* sysdeps/arm/Makefile: Likewise.
* sysdeps/i386/Makefile: Likewise.
* sysdeps/m68k/Makefile: Likewise.
* sysdeps/mips/Makefile: Likewise.
* sysdeps/nios2/Makefile: Likewise.
* sysdeps/sh/Makefile: Likewise.
* sysdeps/sparc/Makefile: Likewise.
Continuing the process of setting up common macros for libm function
aliases, with a view to using them to define _FloatN / _FloatNx
aliases in future, this patch adds a libm_alias_double macro and uses
it in the type-generic templates.
This macro handles defining aliases for double, and for long double in
the NO_LONG_DOUBLE case. It also handles defining compat symbols for
long double = double for architectures that changed their long double
format. By so doing, it eliminates the need for the
M_LIBM_NEED_COMPAT and declare_mgen_libm_compat macros; the single
declare_mgen_alias call in each template now suffices to define all
required compat symbols. When used for more double functions (not
based on type-generic templates), I expect it will eliminate the need
for most ldbl-opt wrappers for such functions.
A few special cases are needed. __clog10l is a public symbol (for
historical reasons) so needs to be given appropriate compat versions
for architectures that changed their long double format, but is not
defined as an alias using the normal macros since __clog10* are *not*
public symbols for _FloatN / _FloatNx types. For scalbn, scalbln and
log1p, the changes adding errno setting support for those functions
left compat symbols pointing directly to the non-errno-setting
implementations. There is no requirement for the compat symbols not
to set errno; that just made for the simplest patches at that time.
Now, with these common macros, it's natural to redirect the compat
symbols to the errno-setting wrappers, which I intend to do in a
separate patch.
Tested for x86_64, and with build-many-glibcs.py. For ldbl-opt
platforms the stripped libm.so binaries are changed (disassembly
unchanged) because the details of how the clog10l compat symbol is
created mean it ceases to be weak as it was before; for other
platforms, stripped libm.so binaries are unchanged.
2017-09-13 Joseph Myers <joseph@codesourcery.com>
* sysdeps/generic/libm-alias-double.h: New file.
* sysdeps/ieee754/ldbl-opt/libm-alias-double.h: Likewise.
* sysdeps/generic/math-type-macros-double.h: Include
<libm-alias-double.h>.
[declare_mgen_alias] (declare_mgen_alias): Define to use
libm_alias_double.
* sysdeps/generic/math-type-macros.h [!M_LIBM_NEED_COMPAT]
(M_LIBM_NEED_COMPAT): Remove macro.
[!M_LIBM_NEED_COMPAT] (declare_mgen_libm_compat): Likewise.
* sysdeps/ieee754/ldbl-opt/math-type-macros-double.h: Remove.
* math/cabs_template.c [M_LIBM_NEED_COMPAT]: Remove conditional
code.
* math/carg_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/cimag_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/conj_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/creal_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cacos_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cacosh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_casin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_casinh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_catan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_catanh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ccos_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ccosh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cexp_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_clog10_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_clog_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cpow_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_cproj_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_csin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_csinh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_csqrt_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ctan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_ctanh_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_fdim_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_fmax_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_fmin_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/s_nan_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* math/w_ilogb_template.c [M_LIBM_NEED_COMPAT]: Likewise.
* sysdeps/ieee754/ldbl-opt/s_clog10.c: New file.
* sysdeps/ieee754/ldbl-opt/s_ldexp.c (M_LIBM_NEED_COMPAT): Remove
macro.
(declare_mgen_alias): New macro.
* sysdeps/ieee754/ldbl-opt/w_log1p.c: New file.
* sysdeps/ieee754/ldbl-opt/w_scalbln.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c
(M_LIBM_NEED_COMPAT): Remove macro.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c
[HAVE_AS_VIS3_SUPPORT]: Include <math_ldbl_opt.h> and
<first-versions.h>.
[HAVE_AS_VIS3_SUPPORT && LONG_DOUBLE_COMPAT (libm,
FIRST_VERSION_libm_fdiml)]: Define fdiml as compat symbol.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
There are various bits/huge_val*.h headers to define HUGE_VAL and
related macros. All of them use __builtin_huge_val etc. for GCC 3.3
and later. Then there are various fallbacks, such as using a large
hex float constant for GCC 2.96 and later, or using unions (with or
without compound literals) to construct the bytes of an infinity, with
this last being the reason for having architecture-specific files.
Supporting TS 18661-3 _FloatN / _FloatNx types that have the same
format as other supported types will mean adding more such macros;
needing to add more headers for them doesn't seem very desirable.
The fallbacks based on bytes of the representation of an infinity do
not meet the standard requirements for a constant expression. At
least one of them is also wrong: sysdeps/sh/bits/huge_val.h is
producing a mixed-endian representation which does not match what GCC
does.
This patch eliminates all those headers, defining the macros directly
in math.h. For GCC 3.3 and later, the built-in functions are used as
now. For other compilers, a large constant 1e10000 (with appropriate
suffix) is used. This is like the fallback for GCC 2.96 and later,
but without using hex floats (which have no apparent advantage here).
It is unambiguously valid standard C for all floating-point formats
with infinities, which covers all formats supported by glibc or likely
to be supported by glibc in future (C90 DR#025 said that if a
floating-point format represents infinities, all real values lie
within the range of representable values, so the constraints for
constant expressions are not violated), but may generate compiler
warnings and wouldn't handle the TS 18661-1 FENV_ROUND pragma
correctly. If someone is actually using a compiler with glibc that
does not claim to be GCC 3.3 or later, but which has a better way to
define the HUGE_VAL macros, we can always add compiler conditionals in
with alternative definitions.
I intend to make similar changes for INF and NAN. The SNAN macros
already just use __builtin_nans etc. with no fallback for compilers
not claiming to be GCC 3.3 or later.
Tested for x86_64.
* math/math.h: Do not include bits/huge_val.h, bits/huge_valf.h,
bits/huge_vall.h or bits/huge_val_flt128.h.
(HUGE_VAL): Define directly here.
[__USE_ISOC99] (HUGE_VALF): Likewise.
[__USE_ISOC99] (HUGE_VALL): Likewise.
[__HAVE_FLOAT128 && __GLIBC_USE (IEC_60559_TYPES_EXT)]
(HUGE_VAL_F128): Likewise.
* math/Makefile (headers): Remove bits/huge_val.h,
bits/huge_valf.h, bits/huge_vall.h and bits/huge_val_flt128.h.
* bits/huge_val.h: Remove.
* bits/huge_val_flt128.h: Likewise.
* bits/huge_valf.h: Likewise.
* bits/huge_vall.h: Likewise.
* sysdeps/ia64/bits/huge_vall.h: Likewise.
* sysdeps/ieee754/bits/huge_val.h: Likewise.
* sysdeps/ieee754/bits/huge_valf.h: Likewise.
* sysdeps/m68k/m680x0/bits/huge_vall.h: Likewise.
* sysdeps/sh/bits/huge_val.h: Likewise.
* sysdeps/sparc/bits/huge_vall.h: Likewise.
* sysdeps/x86/bits/huge_vall.h: Likewise.
This patch removes the SPARC-specific wrappers for sqrt and sqrtf.
These wrappers, by adding architecture-specific uses of _LIB_VERSION
and __kernel_standard, unnecessarily complicate cleanups of libm error
handling. They also do not serve a useful optimization purpose. GCC
knows about sqrt as a built-in function, and can generate direct calls
to a hardware square root instruction, either on its own, in the
-fno-math-errno case, or together with an inline check for the
argument being negative and a call to the out-of-line sqrt function
for error handling only in that case (and has been able to do so for a
long time). Thus in practice the wrapper will only be called only in
the case of negative arguments, which is not a case it is useful to
optimize for.
The removal of the wrappers also uncovers, and fixes, an old bug.
32-bit SPARC libm used (checked with glibc 2.8 binaries) to have a
sqrtl compat symbol, version GLIBC_2.0, for old binaries when sqrtl
was an alias of sqrt (I don't have pre-glibc-2.4 binaries for SPARC to
hand to check for the sqrtl symbol in those). This disappeared,
probably with:
commit 8847f03770
Author: David S. Miller <davem@davemloft.net>
Date: Tue Feb 28 22:37:58 2012 -0800
Add sparc optimized sqrt{,f}.
Removing the wrappers brings back the generic ldbl-opt logic for
creating such compat symbols, and so restores the compat symbol that
should be there. This could of course also be fixed in the wrappers -
but as noted above, the wrappers are optimizing a case it's not useful
to optimize, so the bug of the missing compat symbol serves to
illustrate the risks involved with the extra complexity of
architecture-specific function versions where not needed.
Tested with build-many-glibcs.py.
[BZ #21973]
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Remove file.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S : Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Add
GLIBC_2.0 sqrtl symbol.
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling. matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.
The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).
Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used. If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).
I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).
Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128. This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly. Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.
I intend to move to the new wrappers for static libm and new ports in
followup patches. I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed. GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed). Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for. But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.
Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).
As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
[__USE_MISC] (_LIB_VERSION): Likewise.
[__USE_MISC] (struct exception): Likewise.
[__USE_MISC] (matherr): Likewise.
[__USE_MISC] (DOMAIN): Likewise.
[__USE_MISC] (SING): Likewise.
[__USE_MISC] (OVERFLOW): Likewise.
[__USE_MISC] (UNDERFLOW): Likewise.
[__USE_MISC] (TLOSS): Likewise.
[__USE_MISC] (PLOSS): Likewise.
[__USE_MISC] (HUGE): Likewise.
[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
* math/math-svid-compat.h: New file.
* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
and matherrl.
* include/math.h [!_ISOMAC] (__matherr): Remove.
* manual/arith.texi (FP Exceptions): Do not document matherr.
* math/Makefile (tests): Change test-matherr to test-matherr-3.
(tests-internal): New variable.
(install-lib): Do not add libieee.a.
(non-lib.a): Likewise.
(extra-objs): Do not add libieee.a and ieee-math.o.
(CPPFLAGS-s_lib_version.c): Remove variable.
($(objpfx)libieee.a): Remove rule.
($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
* math/ieee-math.c: Remove.
* math/libm-test-support.c (matherr): Remove.
* math/test-matherr.c: Use <support/test-driver.c>. Add copyright
and license notices. Include <math-svid-compat.h> and
<shlib-compat.h>.
(matherr): Undefine as macro. Use compat_symbol_reference.
(_LIB_VERSION): Likewise.
* math/test-matherr-2.c: New file.
* math/test-matherr-3.c: Likewise.
* sysdeps/generic/math_private.h (__kernel_standard): Remove
declaration.
(__kernel_standard_f): Likewise.
(__kernel_standard_l): Likewise.
* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(_LIB_VERSION): Undefine as macro.
(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define
only if [LIBM_SVID_COMPAT || !defined SHARED]. If
[LIBM_SVID_COMPAT], use compat_symbol.
* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(matherr): Undefine as macro.
(__matherr): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
compat_symbol_reference.
[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
(MATHERR_D): Remove declaration.
[!_LIBC] (_LIB_VERSION_TYPE): Likewise
[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
[LIBM_BUILD] (pmatherrf): Likewise.
[LIBM_BUILD] (pmatherr): Likewise.
[LIBM_BUILD] (pmatherrl): Likewise.
(DOMAIN): Likewise.
(SING): Likewise.
(OVERFLOW): Likewise.
(UNDERFLOW): Likewise.
(TLOSS): Likewise.
(PLOSS): Likewise.
* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
(__matherrf): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
(__matherrl): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* math/lgamma-compat.h: Include <math-svid-compat.h>.
* math/w_acos_compat.c: Likewise.
* math/w_acosf_compat.c: Likewise.
* math/w_acosh_compat.c: Likewise.
* math/w_acoshf_compat.c: Likewise.
* math/w_acoshl_compat.c: Likewise.
* math/w_acosl_compat.c: Likewise.
* math/w_asin_compat.c: Likewise.
* math/w_asinf_compat.c: Likewise.
* math/w_asinl_compat.c: Likewise.
* math/w_atan2_compat.c: Likewise.
* math/w_atan2f_compat.c: Likewise.
* math/w_atan2l_compat.c: Likewise.
* math/w_atanh_compat.c: Likewise.
* math/w_atanhf_compat.c: Likewise.
* math/w_atanhl_compat.c: Likewise.
* math/w_cosh_compat.c: Likewise.
* math/w_coshf_compat.c: Likewise.
* math/w_coshl_compat.c: Likewise.
* math/w_exp10_compat.c: Likewise.
* math/w_exp10f_compat.c: Likewise.
* math/w_exp10l_compat.c: Likewise.
* math/w_exp2_compat.c: Likewise.
* math/w_exp2f_compat.c: Likewise.
* math/w_exp2l_compat.c: Likewise.
* math/w_fmod_compat.c: Likewise.
* math/w_fmodf_compat.c: Likewise.
* math/w_fmodl_compat.c: Likewise.
* math/w_hypot_compat.c: Likewise.
* math/w_hypotf_compat.c: Likewise.
* math/w_hypotl_compat.c: Likewise.
* math/w_j0_compat.c: Likewise.
* math/w_j0f_compat.c: Likewise.
* math/w_j0l_compat.c: Likewise.
* math/w_j1_compat.c: Likewise.
* math/w_j1f_compat.c: Likewise.
* math/w_j1l_compat.c: Likewise.
* math/w_jn_compat.c: Likewise.
* math/w_jnf_compat.c: Likewise.
* math/w_jnl_compat.c: Likewise.
* math/w_lgamma_main.c: Likewise.
* math/w_lgamma_r_compat.c: Likewise.
* math/w_lgammaf_main.c: Likewise.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_main.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* math/w_log10_compat.c: Likewise.
* math/w_log10f_compat.c: Likewise.
* math/w_log10l_compat.c: Likewise.
* math/w_log2_compat.c: Likewise.
* math/w_log2f_compat.c: Likewise.
* math/w_log2l_compat.c: Likewise.
* math/w_log_compat.c: Likewise.
* math/w_logf_compat.c: Likewise.
* math/w_logl_compat.c: Likewise.
* math/w_pow_compat.c: Likewise.
* math/w_powf_compat.c: Likewise.
* math/w_powl_compat.c: Likewise.
* math/w_remainder_compat.c: Likewise.
* math/w_remainderf_compat.c: Likewise.
* math/w_remainderl_compat.c: Likewise.
* math/w_scalb_compat.c: Likewise.
* math/w_scalbf_compat.c: Likewise.
* math/w_scalbl_compat.c: Likewise.
* math/w_sinh_compat.c: Likewise.
* math/w_sinhf_compat.c: Likewise.
* math/w_sinhl_compat.c: Likewise.
* math/w_sqrt_compat.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* math/w_tgamma_compat.c: Likewise.
* math/w_tgammaf_compat.c: Likewise.
* math/w_tgammal_compat.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/k_standard.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
These machine-dependent inline string functions have never been on by
default, and even if they were a good idea at the time they were
introduced, they haven't really been touched in ten to fifteen years
and probably aren't a good idea on current-gen processors. Current
thinking is that this class of optimization is best left to the
compiler.
* bits/string.h, string/bits/string.h
* sysdeps/aarch64/bits/string.h
* sysdeps/m68k/m680x0/m68020/bits/string.h
* sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h
* sysdeps/x86/bits/string.h: Delete file.
* string/string.h: Don't include bits/string.h.
* string/bits/string3.h: Rename to bits/string_fortified.h.
No need to undef various symbols that the removed headers
might have defined as macros.
* string/Makefile (headers): Remove bits/string.h, change
bits/string3.h to bits/string_fortified.h.
* string/string-inlines.c: Update commentary. Remove definitions
of various macros that nothing looks at anymore. Don't directly
include bits/string.h. Set _STRING_INLINE_unaligned here, based on
compiler-predefined macros.
* string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY
_is_ defined, provide internal hidden alias __strncat.
* include/string.h: Declare internal hidden alias __strncat.
Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is
not defined.
* include/bits/string3.h: Rename to bits/string_fortified.h,
update to match above.
* sysdeps/i386/string-inlines.c: Define compat symbols for
everything formerly defined by sysdeps/x86/bits/string.h.
Make existing definitions into compat symbols as well.
Remove some no-longer-necessary messing around with macros.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
* sysdeps/s390/multiarch/mempcpy.c
No need to define _HAVE_STRING_ARCH_mempcpy.
Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT.
* sysdeps/i386/i686/multiarch/strncat-c.c
* sysdeps/s390/multiarch/strncat-c.c
* sysdeps/x86_64/multiarch/strncat-c.c
Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
The LD_HWCAP_MASK environment variable was ignored in static binaries,
which is inconsistent with the behaviour of dynamically linked
binaries. This seems to have been because of the inability of
ld_hwcap_mask being read early enough to influence anything but now
that it is in tunables, the mask is usable in static binaries as well.
This feature is important for aarch64, which relies on HWCAP_CPUID
being masked out to disable multiarch. A sanity test on x86_64 shows
that there are no failures. Likewise for aarch64.
* elf/dl-hwcaps.h [HAVE_TUNABLES]: Always read hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h [HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Always set
up hwcap and hwcap_mask.
Drop _dl_hwcap_mask when building with tunables. This completes the
transition of hwcap_mask reading from _dl_hwcap_mask to tunables.
* elf/dl-hwcaps.h: New file.
* elf/dl-hwcaps.c: Include it.
(_dl_important_hwcaps)[HAVE_TUNABLES]: Read and update
glibc.tune.hwcap_mask.
* elf/dl-cache.c: Include dl-hwcaps.h.
(_dl_load_cache_lookup)[HAVE_TUNABLES]: Read
glibc.tune.hwcap_mask.
* sysdeps/sparc/sparc32/dl-machine.h: Likewise.
* elf/dl-support.c (_dl_hwcap2)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
* elf/rtld.c (rtld_global_ro)[HAVE_TUNABLES]: Drop
_dl_hwcap_mask.
(process_envvars)[HAVE_TUNABLES]: Likewise.
* sysdeps/generic/ldsodefs.h (rtld_global_ro)[HAVE_TUNABLES]:
Likewise.
* sysdeps/x86/cpu-features.c (init_cpu_features): Don't
initialize dl_hwcap_mask when tunables are enabled.
This patch optimizes the generic spinlock code.
The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int. This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.
The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it. The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.
I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free. Without the hint, there is an additional jump if the lock is free.
I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.
The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS. This is defined in atomic-machine.h for all architectures.
The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too! Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one. Thus there is now no option to
do so.
Architectures are now using the generic spinlock automatically if they
do not provide an own implementation. Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.
ChangeLog:
* NEWS: Mention new spinlock implementation.
* include/atomic.h:
(__atomic_val_bysize): Cast type to omit volatile qualifier.
(atomic_exchange_acq): Likewise.
(atomic_load_relaxed): Likewise.
(ATOMIC_EXCHANGE_USES_CAS): Check definition.
* nptl/pthread_spin_init.c (pthread_spin_init):
Use atomic_store_relaxed.
* nptl/pthread_spin_lock.c (pthread_spin_lock):
Use C11-like atomic macros.
* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Use atomic_store_release.
* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
* sysdeps/alpha/atomic-machine.h: Likewise.
* sysdeps/arm/atomic-machine.h: Likewise.
* sysdeps/i386/atomic-machine.h: Likewise.
* sysdeps/ia64/atomic-machine.h: Likewise.
* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
* sysdeps/microblaze/atomic-machine.h: Likewise.
* sysdeps/mips/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
* sysdeps/s390/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
* sysdeps/x86_64/atomic-machine.h: Likewise.
David Miller has not been shot yet AFAIK (yes, I googled for any news
that may seem relevant and I poked him on twitter some days ago) so
either nobody uses SPARC or the code is correct or nobody read the
instructions in the comment to shoot him. In all of those cases the
comment is clearly not useful, so getting rid of it.
The SPARC implementations of __signbit* functions have aliases
signbit, signbitf, signbitl. These are useless, as they aren't
exported from the shared libraries (only the __signbit* functions are
exported, to be used by the type-generic signbit macro with older
compilers). This patch removes the useless aliases.
Tested (compilation only) with build-many-glibcs.py for
sparc64-linux-gnu and sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/fpu/s_signbit.S (signbit): Remove alias.
(signbitf): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbit.S (signbit):
Likewise.
(signbitl): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_signbitf.S (signbitf):
Likewise.
* sysdeps/sparc/sparc64/fpu/s_signbit.S (signbit): Likewise.
(signbitl): Likewise.
* sysdeps/sparc/sparc64/fpu/s_signbitf.S (signbitf): Likewise.
This patch removes all the replicated pthread definition accross the
architectures and consolidates it on shared headers. The new
organization is as follow:
* Architecture specific definition (such as pthread types sizes) are
place in the new pthreadtypes-arch.h header in arch specific path.
* All shared structure definition are moved to a common NPTL header
at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch
specific one for internal definitions).
* Also, for C11 future thread support, both mutex and condition
definition are placed in a common header at
sysdeps/nptl/bits/thread-shared-types.h.
It is also a refactor patch without expected functional changes.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).
* posix/Makefile (headers): Add pthreadtypes-arch.h and
thread-shared-types.h.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch
specific thread definition.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nptl/bits/thread-shared-types.h: New file: shared
thread definition between POSIX and C11.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file.
* sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nptl/bits/pthreadtypes.h: New file: common thread
definitions shared across all architectures.
The Studio compiler generates relocation types which are not supported
in glibc. Handle these relocs.
Tested in sparc64-linux-gnu. No regressions.
BZ #21179]
* sysdeps/sparc/sparc64/dl-machine.h: Handle R_SPARC_DISP64 and
R_SPARC_REGISTER relocations.
With the removal of divdi3 object from sparcv9-linux-gnu build, its
definition came from libgcc and its functions internall calls .udiv.
Since glibc also exports these symbols for compatibility reasons, it
will end up creating PLT calls internally in libc.so.
To avoid it, this patch uses the linker option --wrap to replace all
the internal libc.so .udiv calls to the wrapper __wrap_.udiv. Along
with strong alias in the udiv implementations, it makes linker do
local calls.
Checked on sparcv9-linux-gnu.
* sysdeps/sparc/sparc32/Makefile (libc.so-gnulib): New rule.
* sysdeps/sparc/sparc32/sparcv8/udiv.S (.udiv): Make a strong_alias
to __wrap_.udiv.
* sysdeps/sparc/sparc32/sparcv9/udiv.S (.udiv): Likewise.
* sysdeps/sparc/sparc32/udiv.S (.udiv): Likewise.
sysdeps/unix/sysv/linux/sparc/bits/setjmp.h defines 64-bit __jmp_buf
with a load of identifiers that are not part of any standard
namespace, resulting in conform/ tests failing. This patch fixes this
by moving those identifiers to the implementation namespace, so
enabling the conform/ tests to pass for sparc64.
Tested (compilation only) for sparc64 with build-many-glibcs.py.
[BZ #21261]
* sysdeps/unix/sysv/linux/sparc/bits/setjmp.h
[__WORDSIZE == 64 && !_ASM] (__sparc64_jmp_buf): Use reserved
names for all fields.
* sysdeps/sparc/sparc64/jmpbuf-unwind.h (_JMPBUF_UNWINDS): Update
for jmp_buf field renaming.
(_JMPBUF_UNWINDS_ADJ): Likewise.
This commit moves one step towards the deprecation of wrappers that
use _LIB_VERSION / matherr / __kernel_standard functionality, by
adding the suffix '_compat' to their filenames and adjusting Makefiles
and #includes accordingly.
New template wrappers that do not use such functionality will be added
by future patches and will be first used by the float128 wrappers.
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.
There are only two possible values of each of those macros permitted
by ISO C. TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way. Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.
This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.
The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.
Tested for x86_64 and x86. Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).
* bits/fp-logb.h: New file.
* sysdeps/ia64/bits/fp-logb.h: Likewise.
* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
* sysdeps/x86/bits/fp-logb.h: Likewise.
* math/Makefile (headers): Add bits/fp-logb.h.
* math/math.h: Include <bits/fp-logb.h>.
[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
* bits/mathdef.h (FP_ILOGB0): Remove.
(FP_ILOGBNAN): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.
For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs. Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.
This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t. The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).
To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics. At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.
Architecture maintainer notes:
* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But
actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It
might make sense to make the header prefer to base things on
__FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
the choices of these types more accurate (with a NEWS entry as for
the other changes to these types on particular architectures).
* s390: sysdeps/s390/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As
previously discussed, it might make sense in coordination with GCC
to eliminate the historic mistake, avoid excess precision in the
-fexcess-precision=standard case and make the typedefs match (with a
NEWS entry, again).
Tested for x86-64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/flt-eval-method.h: New file.
* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
* sysdeps/s390/bits/flt-eval-method.h: Likewise.
* sysdeps/x86/bits/flt-eval-method.h: Likewise.
* math/Makefile (headers): Add bits/flt-eval-method.h.
* math/math.h: Include <bits/flt-eval-method.h>.
[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
[__USE_ISOC99] (double_t): Likewise.
* bits/mathdef.h (float_t): Remove.
(double_t): Likewise.
* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual). This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.
This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file. The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.
Tested for x86_64.
[BZ #14139]
* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
(find_files): Obtain platform name from libm-test-ulps-name and
store in %pplatforms.
(canonicalize_platform): Remove.
(print_platforms): Use $pplatforms directly.
(by_platforms): Do not allow for platforms missing from
%pplatforms.
* sysdeps/aarch64/libm-test-ulps-name: New file.
* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
* sysdeps/arm/libm-test-ulps-name: Likewise.
* sysdeps/generic/libm-test-ulps-name: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
* sysdeps/microblaze/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
* sysdeps/nios2/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
* sysdeps/sh/libm-test-ulps-name: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/tile/libm-test-ulps-name: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
This was used by --enable-omitfp, and the bulk of it was removed in this
commit:
commit bdeba1354b
Author: Ulrich Drepper <drepper@gmail.com>
Date: Sat Jan 7 11:29:31 2012 -0500
Remove --enable-omitfp support
Current sparc32 sem_init and default one only differ on sem.newsem.pad
initialization. This patch removes sparc32 and sparc32v9 sem_init arch
specific implementation and set sparc32 to use nptl default one.
The default implementation sets the required sem.newsem.pad to 0 (which
is ununsed in other architectures).
I checked on i686 and a sparc32v9 build.
* nptl/sem_init.c (sem_init): Init pad value to 0.
* sysdeps/sparc/sparc32/sem_init.c: Remove file.
* sysdeps/sparc/sparc32/sparcv9/sem_init.c: Likewise.
This patch removes the sparc32 sem_wait.c implementation since it is
identical to default nptl one. The sparcv9 is no longer required with
the removal.
Checked with a sparcv9 build.
* sysdeps/sparc/sparc32/sem_wait.c: Remove file.
* sysdeps/sparc/sparc32/sparcv9/sem_wait.c: Likewise.
Current sparc32 sem_open and default one only differ on:
1. Default one contains a 'futex_supports_pshared' check.
2. sem.newsem.pad is initialized to zero.
This patch removes sparc32 and sparc32v9 sem_open arch specific
implementation and instead set sparc32 to use nptl default one.
Using 1. is fine since it should always evaluate 0 for Linux
(an optimized away by the compiler). Adding 2. to default
implementation should be ok since 'pad' field is used mainly
on sparc32 code.
I checked on i686 and checked a sparc32v9 build.
* nptl/sem_open.c (sem_open): Init pad value to 0.
* sysdeps/sparc/sparc32/sem_open.c: Remove file.
* sysdeps/sparc/sparc32/sparcv9/sem_open.c: Likewise.
This patch adds SPARC versions of fegetmode and fesetmode. Untested.
* sysdeps/sparc/fpu/fegetmode.c: New file.
* sysdeps/sparc/fpu/fesetmode.c: Likewise.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
The only difference is the usage of math_narrow_eval when
building s_fdiml.c. This should be harmless for long double,
but I did observe some code generation changes on m68k, but
lack the resources to test it.
Likewise, to more easily support overriding symbol generation,
the aliasing macros are always conditionally defined on their
absence to reduce boilerplate.
I also ran builds for i486, ppc64, sparcv9, aarch64,
s390x and observed no changes to s_fdim* objects.
sparc32 passes floating point values in the integer registers. VIS3
instructions gives access to the movwtos instruction to directly
transfer a value from an integer register to a floating point register.
Therefore it makes sense to provide a VIS3 version consisting in the
generic version compiled with -mvis3.
Changelog:
* math/s_fdim.c: Avoid alias renamed.
* math/s_fdimf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_fdimf-vis3, s_fdim-vis3.
(CFLAGS-s_fdimf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_fdim-vis3.c): Likewise.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c: New file.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
The fdim and fdimf functions on sparc do not fully follow the standard
and do not set errno to ERANGE when the result overflows. Since glibc
2.24 this causes the two following tests to fail:
Failure: fdim (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
Failure: fdim_upward (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
It happens that using GCC with the generic C code generates very similar
code to the sparc specific implementations. Therefore this patches
remove them. Note it might still worth adding a vis3 specific version of
fdim on sparc32/sparcv9, this is done in a following patch to ease
backporting.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Remove s_fdimf-vis3, s_fdim-vis3.
* sysdeps/sparc/sparc32/fpu/s_fdim.S: Delete file.
* sysdeps/sparc/sparc32/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_fdimf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdim.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_fdimf.S: Likewise.
When building for sparc32/sparcv9 or sparc64, we assume that VIS
instructions are available and use them in the sparc specific assembly
code. However we do not tell GCC to use such instructions, resulting in
slightly suboptimal code.
Fix that by passing -Wa,-Av9a -mvis to GCC.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/Makefile (sysdep-CFLAGS): Add -mvis.
* sysdeps/sparc/sparc64/Makefile (sysdep-CFLAGS): New. Define to
-Wa,-Av9a -mvis.
sparc64 passes floating point values in the floating point registers.
As the the generic ceil, floor and trunc functions use integer
instructions, it makes sense to provide a VIS3 version consisting in
the the generic version compiled with -mvis3. GCC will then use
movdtox, movxtod, movwtos and movstow instructions.
sparc32 passes the floating point values in the integer registers, so it
doesn't make sense to do the same.
Changelog:
* sysdeps/ieee754/dbl-64/s_trunc.c: Avoid alias renamed.
* sysdeps/ieee754/dbl-64/wordsize-64/s_trunc.c: Likewise.
* sysdeps/ieee754/flt-32/s_truncf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
s_truncf-vis3, s_trunc-vis3.
(CFLAGS-s_ceilf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_ceil-vis3.c): Likewise.
(CFLAGS-s_floorf-vis3.c): Likewise.
(CFLAGS-s_floor-vis3.c): Likewise.
(CFLAGS-s_truncf-vis3.c): Likewise.
(CFLAGS-s_trunc-vis3.c): Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.c: New file.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.c: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.c: Likewise.
The ceil, floor and trunc functions on sparc do not fully follow the
standard and trigger an inexact exception when presented a value which
is not an integer. Since glibc 2.24 this causes a few tests to fail,
for instance:
testing double (without inline functions)
Failure: ceil (lit_pi): Exception "Inexact" set
Failure: ceil (-lit_pi): Exception "Inexact" set
Failure: ceil (min_subnorm_value): Exception "Inexact" set
Failure: ceil (min_value): Exception "Inexact" set
Failure: ceil (0.1): Exception "Inexact" set
Failure: ceil (0.25): Exception "Inexact" set
Failure: ceil (0.625): Exception "Inexact" set
Failure: ceil (-min_subnorm_value): Exception "Inexact" set
Failure: ceil (-min_value): Exception "Inexact" set
Failure: ceil (-0.1): Exception "Inexact" set
Failure: ceil (-0.25): Exception "Inexact" set
Failure: ceil (-0.625): Exception "Inexact" set
I tried to fix that by using the same strategy than used on other
architectures, that is by saving the FSR register at the beginning
and restoring it at the end of the function. When doing so I noticed
a comment that this operation might be very costly, so I decided to
do some benchmarks.
The benchmarks below represent the time required to run each of the
function 60 millions of times with different input value. I have done
that in the basic V9 code, the VIS2 code, and using the default C
implementation of the libc, for both sparc32 and sparc64, on a Niagara
T1 based machine and an UltraSparc IIIi. Given I don't have access to a
more recent machine), I haven't been able to test the VIS3 version. Also
it should be noted that it doesn't make sense to do this benchmark for
V8 or earlier as in that case we use the default C implementation. The
results are available in the table below, the "+ fix" version correspond
to the one saving and restoring the FSR.
Niagara T1 / sparc32
--------------------
ceilf ceil floorf floor truncf trunc
V9 19.10 22.48 19.10 22.48 16.59 19.27
V9 + fix 19.77 23.34 19.77 23.33 17.27 20.12
VIS2 16.87 19.62 16.87 19.62
VIS2 + fix 17.55 20.47 17.55 20.47
C impl 11.39 13.80 11.40 13.80 10.88 10.84
Niagara T1 / sparc64
--------------------
ceilf ceil floorf floor truncf trunc
V9 18.14 22.23 18.14 22.23 15.64 19.02
V9 + fix 18.82 23.08 18.82 23.08 16.32 19.87
VIS2 15.92 19.37 15.92 19.37
VIS2 + fix 16.59 20.22 16.59 20.22
C impl 11.39 13.60 11.39 15.36 10.88 12.65
UltraSparc IIIi / sparc32
-------------------------
ceilf ceil floorf floor truncf trunc
V9 4.81 7.09 6.61 11.64 4.91 7.05
V9 + fix 7.20 10.42 7.14 10.54 6.76 9.47
VIS2 4.81 7.03 4.76 7.13
VIS2 + fix 6.76 9.51 6.71 9.63
C impl 3.88 8.62 3.90 9.45 3.57 6.62
UltraSparc IIIi / sparc64
-------------------------
ceilf ceil floorf floor truncf trunc
V9 3.48 4.39 3.48 4.41 3.01 3.85
V9 + fix 4.76 5.90 4.76 5.90 4.86 6.26
VIS2 2.95 3.61 2.95 3.61
VIS2 + fix 4.24 5.37 4.30 7.97
C impl 3.63 4.89 3.62 6.38 3.33 4.03
The first thing that should be noted is that the C implementation is
always faster on the Niagara T1 based machine. On the UltraSparc IIIi
the float version on sparc32 is also faster.
Coming back about the fix saving and restoring the FSR, it appears
it has a big impact as expected. In that case the C implementation is
always faster than the fixed implementations.
This patch therefore removes the sparc specific implementations in
favor of the generic ones.
Changelog:
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math] (libm-sysdep_routines): Remove.
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Remove s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
s_truncf-vis3, s_trunc-vis3.
* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis2.S: Delete
file.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis2.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis2.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: Likewise.
* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_ceil.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_ceilf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_floor.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_floorf.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_trunc.S: Likewise.
* sysdeps/sparc/sparc64/fpu/s_truncf.S: Likewise.
nearbyint and nearbyintf should not trigger inexact exceptions, but
should still trigger an invalid exception for a sNaN input.
The SPARC specific implementations of these functions save the FSR at
the beginning of the function and restore it at the end to not trigger
an inexact exception. This however doesn't work for an sNaN input which
need to trigger an invalid exception. Fix that by adding a fcmp
instruction using the input value before saving FSR, so that an invalid
exception is triggered for a sNaN input.
This fixes the math/test-nearbyint-except test on SPARC.
Changelog:
* sparc/sparc32/sparcv9/fpu/s_nearbyint.S (__nearbyint): Trigger an
invalid exception for a sNaN input.
* sparc/sparc32/sparcv9/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyint-vis3.S
(__nearbyint_vis3): Likewise
* sparc/sparc32/sparcv9/fpu/multiarch/s_nearbyintf-vis3.S
(__nearbyintf_vis3): Likewise
* sparc/sparc64/fpu/s_nearbyint.S (__nearbyint): Likewise.
* sparc/sparc64/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sparc/sparc64/fpu/multiarch/s_nearbyint-vis3.S (__nearbyint_vis3):
Likewise.
* sparc/sparc64/fpu/multiarch/s_nearbyintf-vis3.S (__nearbyintf_vis3):
Likewise.
As discussed in
https://sourceware.org/ml/libc-alpha/2015-10/msg00403.html
the setting of _STRING_ARCH_unaligned currently controls the external
GLIBC ABI as well as selecting the use of unaligned accesses withing
GLIBC.
Since _STRING_ARCH_unaligned was recently changed for AArch64, this
would potentially break the ABI in GLIBC 2.23, so split the uses and add
_STRING_INLINE_unaligned to select the string ABI. This setting must be
fixed for each target, while _STRING_ARCH_unaligned may be changed from
release to release. _STRING_ARCH_unaligned is used unconditionally in
glibc. But <bits/string.h>, which defines _STRING_ARCH_unaligned, isn't
included with -Os. Since _STRING_ARCH_unaligned is internal to glibc and
may change between glibc releases, it should be made private to glibc.
_STRING_ARCH_unaligned should defined in the new string_private.h heade
file which is included unconditionally from internal <string.h> for glibc
build.
[BZ #19462]
* bits/string.h (_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* include/string.h: Include <string_private.h>.
* string/bits/string2.h: Replace _STRING_ARCH_unaligned with
_STRING_INLINE_unaligned.
* sysdeps/aarch64/bits/string.h (_STRING_ARCH_unaligned): Removed.
(_STRING_INLINE_unaligned): New.
* sysdeps/aarch64/string_private.h: New file.
* sysdeps/generic/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/string_private.h: Likewise.
* sysdeps/s390/string_private.h: Likewise.
* sysdeps/x86/string_private.h: Likewise.
* sysdeps/m68k/m680x0/m68020/bits/string.h
(_STRING_ARCH_unaligned): Renamed to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/s390/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/sparc/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
* sysdeps/x86/bits/string.h (_STRING_ARCH_unaligned): Renamed
to ...
(_STRING_INLINE_unaligned): This.
The previous barrier implementation did not fulfill the POSIX requirements
for when a barrier can be destroyed. Specifically, it was possible that
threads that haven't noticed yet that their round is complete still access
the barrier's memory, and that those accesses can happen after the barrier
has been legally destroyed.
The new algorithm does not have this issue, and it avoids using a lock
internally.
As noted in bug 6803, scalbn fails to set errno on overflow and
underflow. This patch fixes this by making scalbn an alias of ldexp,
which has exactly the same semantics (for floating-point types with
radix 2) and already has wrappers that deal with setting errno,
instead of an alias of the internal __scalbn (which ldexp calls).
Notes:
* Where compat symbols were defined for scalbn functions, I didn't
change what they point to (to keep the patch minimal), so such
compat symbols continue to go directly to the non-errno-setting
functions.
* Mike, I didn't do anything with the IA64 versions of these
functions, where I think both the ldexp and scalbn functions already
deal with setting errno. As a cleanup (not needed to fix this bug)
however you might want to make those functions into aliases for
IA64; there is no need for them to be separate function
implementations at all.
* This concludes the fix for bug 6803 since the scalb and scalbln
cases of that bug were fixed some time ago.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6803]
* math/s_ldexp.c (scalbn): Define as weak alias of __ldexp.
[NO_LONG_DOUBLE] (scalbnl): Define as weak alias of __ldexp.
* math/s_ldexpf.c (scalbnf): Define as weak alias of __ldexpf.
* math/s_ldexpl.c (scalbnl): Define as weak alias of __ldexpl.
* sysdeps/i386/fpu/s_scalbn.S (scalbn): Remove alias.
* sysdeps/i386/fpu/s_scalbnf.S (scalbnf): Likewise.
* sysdeps/i386/fpu/s_scalbnl.S (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/s_scalbn.c (scalbn): Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/dbl-64/wordsize-64/s_scalbn.c (scalbn):
Likewise.
[NO_LONG_DOUBLE] (scalbnl): Likewise.
* sysdeps/ieee754/flt-32/s_scalbnf.c (scalbnf): Likewise.
* sysdeps/ieee754/ldbl-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c (scalbnl): Remove
long_double_symbol calls.
* sysdeps/ieee754/ldbl-64-128/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/ieee754/ldbl-opt/s_ldexpl.c (__ldexpl_2): Define as
strong alias of __ldexpl.
(scalbnl): Define using long_double_symbol.
* sysdeps/m68k/m680x0/fpu/s_scalbn.c (__CONCATX(scalbn,suffix)):
Remove alias.
* sysdeps/sparc/sparc64/soft-fp/s_scalbnl.c (scalbnl): Likewise.
* sysdeps/x86_64/fpu/s_scalbnl.S (scalbnl): Likewise.
* math/libm-test.inc (scalbn_test_data): Add errno expectations.
(scalbln_test_data): Add more errno expectations.
It was noted in
<https://sourceware.org/ml/libc-alpha/2012-09/msg00305.html> that the
bits/*.h naming scheme should only be used for installed headers.
This patch renames bits/atomic.h to atomic-machine.h to follow that
convention.
This is the only change in this series that needs to change the
filename rather than simply removing a directory level (because both
atomic.h and bits/atomic.h exist at present).
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch).
[BZ #14912]
* sysdeps/aarch64/bits/atomic.h: Move to ...
* sysdeps/aarch64/atomic-machine.h: ...here.
(_AARCH64_BITS_ATOMIC_H): Rename macro to
_AARCH64_ATOMIC_MACHINE_H.
* sysdeps/alpha/bits/atomic.h: Move to ...
* sysdeps/alpha/atomic-machine.h: ...here.
* sysdeps/arm/bits/atomic.h: Move to ...
* sysdeps/arm/atomic-machine.h: ...here. Update comments.
* bits/atomic.h: Move to ...
* sysdeps/generic/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/i386/bits/atomic.h: Move to ...
* sysdeps/i386/atomic-machine.h: ...here.
* sysdeps/ia64/bits/atomic.h: Move to ...
* sysdeps/ia64/atomic-machine.h: ...here.
* sysdeps/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/m68k/m680x0/m68020/bits/atomic.h: Move to ...
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: ...here.
* sysdeps/microblaze/bits/atomic.h: Move to ...
* sysdeps/microblaze/atomic-machine.h: ...here.
* sysdeps/mips/bits/atomic.h: Move to ...
* sysdeps/mips/atomic-machine.h: ...here.
(_MIPS_BITS_ATOMIC_H): Rename macro to _MIPS_ATOMIC_MACHINE_H.
* sysdeps/powerpc/bits/atomic.h: Move to ...
* sysdeps/powerpc/atomic-machine.h: ...here. Update comments.
* sysdeps/powerpc/powerpc32/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc32/atomic-machine.h: ...here. Update
comments. Include <atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/powerpc/powerpc64/bits/atomic.h: Move to ...
* sysdeps/powerpc/powerpc64/atomic-machine.h: ...here. Include
<atomic-machine.h> instead of <bits/atomic.h>.
* sysdeps/s390/bits/atomic.h: Move to ...
* sysdeps/s390/atomic-machine.h: ...here.
* sysdeps/sparc/sparc32/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: ...here.
* sysdeps/sparc/sparc64/bits/atomic.h: Move to ...
* sysdeps/sparc/sparc64/atomic-machine.h: ...here.
* sysdeps/tile/bits/atomic.h: Move to ...
* sysdeps/tile/atomic-machine.h: ...here.
* sysdeps/tile/tilegx/bits/atomic.h: Move to ...
* sysdeps/tile/tilegx/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/tile/tilepro/bits/atomic.h: Move to ...
* sysdeps/tile/tilepro/atomic-machine.h: ...here. Include
<sysdeps/tile/atomic-machine.h> instead of
<sysdeps/tile/bits/atomic.h>.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/arm/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/arm/atomic-machine.h: ...here. Include
<sysdeps/arm/atomic-machine.h> instead of
<sysdeps/arm/bits/atomic.h>.
* sysdeps/unix/sysv/linux/hppa/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/m68k/coldfire/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: ...here.
(_BITS_ATOMIC_H): Rename macro to _ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/nios2/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: ...here.
(_NIOS2_BITS_ATOMIC_H): Rename macro to _NIOS2_ATOMIC_MACHINE_H.
* sysdeps/unix/sysv/linux/sh/bits/atomic.h: Move to ...
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: ...here.
* sysdeps/x86_64/bits/atomic.h: Move to ...
* sysdeps/x86_64/atomic-machine.h: ...here.
* include/atomic.h: Include <atomic-machine.h> instead of
<bits/atomic.h>.
This adds new functions for futex operations, starting with wait,
abstimed_wait, reltimed_wait, wake. They add documentation and error
checking according to the current draft of the Linux kernel futex manpage.
Waiting with absolute or relative timeouts is split into separate functions.
This allows for removing a few cases of code duplication in pthreads code,
which uses absolute timeouts; also, it allows us to put platform-specific
code to go from an absolute to a relative timeout into the platform-specific
futex abstractions..
Futex operations that can be canceled are also split out into separate
functions suffixed by "_cancelable".
There are separate versions for both Linux and NaCl; while they currently
differ only slightly, my expectation is that the separate versions of
lowlevellock-futex.h will eventually be merged into futex-internal.h
when we get to move the lll_ functions over to the new futex API.
This patch combines BUSY_WAIT_NOP and atomic_delay into a new
atomic_spin_nop function and adjusts all clients. The new function is
put into atomic.h because what is best done in a spin loop is
architecture-specific, and atomics must be used for spinning. The
function name is meant to tell users that this has no effect on
synchronization semantics but is a performance aid for spinning.
mq_notify (present in POSIX by 1996) brings in references to
pthread_barrier_init and pthread_barrier_wait (new in the 2001 edition
of POSIX). This patch fixes this by making those functions into weak
aliases of __pthread_barrier_*, exporting the __pthread_barrier_*
names at version GLIBC_PRIVATE and using them in mq_notify.
Tested for x86_64 and x86 (testsuite, and comparison of installed
stripped shared libraries). Changes in addresses from dynamic symbol
table / PLT changes render most comparisons not particularly useful,
but when the addresses of subsequent code don't change there's no sign
of unexpected changes there. This patch does not remove any
linknamespace XFAILs because of other namespace issues remaining with
mqueue.h functions.
[BZ #18544]
* nptl/pthread_barrier_init.c (pthread_barrier_init): Rename to
__pthread_barrier_init and define as weak alias of
__pthread_barrier_init.
* sysdeps/sparc/nptl/pthread_barrier_init.c
(pthread_barrier_init): Likewise.
* nptl/pthread_barrier_wait.c (pthread_barrier_wait): Rename to
__pthread_barrier_wait and define as weak alias of
__pthread_barrier_wait.
* sysdeps/sparc/nptl/pthread_barrier_wait.c
(pthread_barrier_wait): Likewise.
* sysdeps/sparc/sparc32/pthread_barrier_wait.c
(pthread_barrier_wait): Likewise.
* sysdeps/unix/sysv/linux/i386/i486/pthread_barrier_wait.S
(pthread_barrier_wait): Likewise.
* sysdeps/unix/sysv/linux/x86_64/pthread_barrier_wait.S
(pthread_barrier_wait): Likewise.
* nptl/Versions (libpthread): Export __pthread_barrier_init and
__pthread_barrier_wait at version GLIBC_PRIVATE.
* include/pthread.h (__pthread_barrier_init): Declare.
(__pthread_barrier_wait): Likewise.
* sysdeps/unix/sysv/linux/mq_notify.c (notification_function):
Call __pthread_barrier_wait instead of pthread_barrier_wait.
(helper_thread): Likewise.
(init_mq_netlink): Call __pthread_barrier_init instead of
pthread_barrier_init.
The sem_* functions bring in references to tdelete, tfind, tsearch and
twalk. But the t* functions are XSI-shaded, while sem_* aren't. This
patch fixes this by using __t* instead, exporting those functions from
libc at version GLIBC_PRIVATE (since sem_* are in libpthread) and
using libc_hidden_* for the benefit of calls within libc.
Tested for x86_64 and x86 (testsuite, and comparison of disassembly of
installed stripped shared libraries). libpthread gets changes from
PLT reordering; addresses in libc change because of PLT / dynamic
symbol table changes.
[BZ #18536]
* misc/tsearch.c (__tsearch): Use libc_hidden_def.
(__tfind): Likewise.
(__tdelete): Likewise.
(__twalk): Likewise.
* misc/Versions (libc): Add __tdelete, __tfind, __tsearch and
__twalk to GLIBC_PRIVATE.
* include/search.h (__tsearch): Use libc_hidden_proto.
(__tfind): Likewise.
(__tdelete): Likewise.
(__twalk): Likewise.
* nptl/sem_close.c (sem_close): Call __twalk instead of twalk.
Call __tdelete instead of tdelete.
* nptl/sem_open.c (check_add_mapping): Call __tfind instead of
tfind. Call __tsearch instead of tsearch.
* sysdeps/sparc/sparc32/sem_open.c (check_add_mapping): Likewise.
* conform/Makefile (test-xfail-POSIX/semaphore.h/linknamespace):
Remove variable.
(test-xfail-POSIX2008/semaphore.h/linknamespace): Likewise.
* sysdeps/sparc/sparc32/bits/atomic.h
(__sparc32_atomic_do_unlock24): Put the memory barrier before the
unlock not after it.
(__v9_compare_and_exchange_val_32_acq): Use unions to avoid getting
volatile register usage warnings from the compiler.
Concluding the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of feupdateenv by making it a weak alias for
__feupdateenv and making the affected code call __feupdateenv.
Tested for x86_64 (testsuite, and that installed stripped shared
libraries are unchanged by the patch). Also tested for ARM
(soft-float) that the math.h linknamespace tests now pass.
[BZ #17748]
* include/fenv.h (__feupdateenv): Use libm_hidden_proto.
* math/feupdateenv.c (__feupdateenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/arm/feupdateenv.c (feupdateenv): Rename to __feupdateenv
and define as weak alias of __feupdateenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/powerpc/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feupdateenv.c
(__feupdateenv): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Rename to
__feupdateenv and define as weak alias of __feupdateenv. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/tile/math_private.h (__feupdateenv): New inline
function.
* sysdeps/x86_64/fpu/feupdateenv.c (__feupdateenv): Use
libm_hidden_def.
* sysdeps/generic/math_private.h (default_libc_feupdateenv): Call
__feupdateenv instead of feupdateenv.
(default_libc_feupdateenv_test): Likewise.
(libc_feresetround_ctx): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fesetround by making it a weak alias of
__fesetround and making the affected code call __fesetround. An
existing __fesetround function in fenv_libc.h for powerpc is renamed
to __fesetround_inline.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fesetround failures disappear from the linknamespace
test results (feupdateenv remains to be addressed to complete fixing
bug 17748).
[BZ #17748]
* include/fenv.h (__fesetround): Declare. Use libm_hidden_proto.
* math/fesetround.c (fesetround): Rename to __fesetround and
define as weak alias of __fesetround. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/alpha/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/arm/fesetround.c (fesetround): Likewise.
* sysdeps/hppa/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/i386/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/ia64/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/m68k/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/mips/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/powerpc/fpu/fenv_libc.h (__fesetround): Rename to
__fesetround_inline.
* sysdeps/powerpc/fpu/fenv_private.h (libc_fesetround_ppc): Call
__fesetround_inline instead of __fesetround.
* sysdeps/powerpc/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak. Call __fesetround_inline instead of
__fesetround.
* sysdeps/powerpc/nofpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/powerpc/powerpc32/e500/nofpu/fesetround.c (fesetround):
Likewise.
* sysdeps/s390/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sh/sh4/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/sparc/fpu/fesetround.c (fesetround): Likewise.
* sysdeps/tile/math_private.h (__fesetround): New inline function.
* sysdeps/x86_64/fpu/fesetround.c (fesetround): Rename to
__fesetround and define as weak alias of __fesetround. Use
libm_hidden_weak.
* sysdeps/generic/math_private.h (default_libc_fesetround): Call
__fesetround instead of fesetround.
(default_libc_feholdexcept_setround): Likewise.
(libc_feholdsetround_ctx): Likewise.
(libc_feholdsetround_noex_ctx): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fesetenv by making it a weak alias of
__fesetenv and making the affected code (including various copies of
feupdateenv which also gets called from C90 functions) call
__fesetenv.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fesetenv failures disappear from the linknamespace
test results (fsetround and feupdateenv remain to be addressed to
complete fixing bug 17748).
[BZ #17748]
* include/fenv.h (__fesetenv): Use libm_hidden_proto.
* math/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv
and define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/alpha/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/arm/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/fesetenv.c (fesetenv): Likewise.
* sysdeps/i386/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/ia64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/m68k/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/mips/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/powerpc/fpu/fesetenv.c (__fesetenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fesetenv.c (__fesetenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fesetenv.c (__fesetenv):
Likewise.
* sysdeps/s390/fpu/fesetenv.c (fesetenv): Rename to __fesetenv and
define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fesetenv.c (fesetenv): Likewise.
* sysdeps/sparc/fpu/fesetenv.c (__fesetenv): Use libm_hidden_def.
* sysdeps/tile/math_private.h (__fesetenv): New inline function.
* sysdeps/x86_64/fpu/fesetenv.c (fesetenv): Rename to __fesetenv
and define as weak alias of __fesetenv. Use libm_hidden_weak.
* sysdeps/generic/math_private.h (default_libc_fesetenv): Use
__fesetenv instead of fesetenv.
(libc_feresetround_noex_ctx): Likewise.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/hppa/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/i386/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/powerpc/nofpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feupdateenv.c
(__feupdateenv): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/x86_64/fpu/feupdateenv.c (__feupdateenv): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of feholdexcept by making it a weak alias of
__feholdexcept and making the affected code call __feholdexcept.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that feholdexcept failures disappear from the
linknamespace test failures (fesetenv, fsetround and feupdateenv
remain to be addressed to complete fixing bug 17748).
[BZ #17748]
* include/fenv.h (__feholdexcept): Declare. Use
libm_hidden_proto.
* math/feholdexcpt.c (feholdexcept): Rename to __feholdexcept and
define as weak alias of __feholdexcept. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/alpha/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/arm/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/hppa/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/i386/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/ia64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/m68k/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/mips/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/nofpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/feholdexcpt.c
(feholdexcept): Likewise.
* sysdeps/s390/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/sh/sh4/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/sparc/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/x86_64/fpu/feholdexcpt.c (feholdexcept): Likewise.
* sysdeps/generic/math_private.h (default_libc_feholdexcept): Use
__feholdexcept instead of feholdexcept.
(default_libc_feholdexcept_setround): Likewise.
Continuing the fixes for C90 libm functions calling C99 fe* functions,
this patch fixes the case of fegetround by making it a weak alias of
__fegetround and making the affected code call __fegetround.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fegetround failures disappear from the linknamespace
test failures (feholdexcept, fesetenv, fesetround and feupdateenv
remain to be addressed before bug 17748 is fully fixed, although this
patch may suffice to fix the failures in some cases, when the libc_fe*
functions are implemented but there is no architecture-specific sqrt
implementation in use so there were failures from fegetround used by
sqrt but no other such failures).
[BZ #17748]
* include/fenv.h (__fegetround): Declare. Use libm_hidden_proto.
* math/fegetround.c (fegetround): Rename to __fegetround and
define as weak alias of __fegetround. Use libm_hidden_weak.
* sysdeps/aarch64/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/alpha/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/arm/fegetround.c (fegetround): Likewise.
* sysdeps/hppa/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/i386/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/ia64/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/m68k/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/mips/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/powerpc/fpu/fegetround.c (fegetround): Likewise.
Undefine after rather than before function definition; use
parentheses around function name in definition.
(__fegetround): Also undefine macro after function definition.
* sysdeps/powerpc/nofpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak. Do not undefine as macro.
* sysdeps/powerpc/powerpc32/e500/nofpu/fegetround.c (fegetround):
Likewise.
* sysdeps/s390/fpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/sparc/fpu/fegetround.c (fegetround): Likewise.
* sysdeps/tile/math_private.h (__fegetround): New inline function.
* sysdeps/x86_64/fpu/fegetround.c (fegetround): Rename to
__fegetround and define as weak alias of __fegetround. Use
libm_hidden_weak.
* sysdeps/ieee754/dbl-64/e_sqrt.c (__ieee754_sqrt): Use
__fegetround instead of fegetround.
Some C90 libm functions call fegetenv via libc_feholdsetround*
functions in math_private.h. This patch makes them call __fegetenv
instead, making fegetenv into a weak alias for __fegetenv as needed.
Tested for x86_64 (testsuite, and that disassembly of installed shared
libraries is unchanged by the patch). Also tested for ARM
(soft-float) that fegetenv failures disappear from the linknamespace
test failures (however, similar fixes will also be needed for
fegetround, feholdexcept, fesetenv, fesetround and feupdateenv before
this set of namespace issues covered by bug 17748 is fully fixed and
those linknamespace tests start passing).
[BZ #17748]
* include/fenv.h (__fegetenv): Use libm_hidden_proto.
* math/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv
and define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/alpha/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/arm/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/hppa/fpu/fegetenv.c (fegetenv): Likewise.
* sysdeps/i386/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/ia64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/m68k/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/mips/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/powerpc/fpu/fegetenv.c (__fegetenv): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fegetenv.c (__fegetenv): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fegetenv.c (__fegetenv):
Likewise.
* sysdeps/s390/fpu/fegetenv.c (fegetenv): Rename to __fegetenv and
define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fegetenv.c (fegetenv): Likewise.
* sysdeps/sparc/fpu/fegetenv.c (__fegetenv): Use libm_hidden_def.
* sysdeps/tile/math_private.h (__fegetenv): New inline function.
* sysdeps/x86_64/fpu/fegetenv.c (fegetenv): Rename to __fegetenv
and define as weak alias of __fegetenv. Use libm_hidden_weak.
* sysdeps/generic/math_private.h (libc_feholdsetround_ctx): Use
__fegetenv instead of fegetenv.
(libc_feholdsetround_noex_ctx): Likewise.
Various C90 and UNIX98 libm functions call feraiseexcept, which is not
in those standards. This causes linknamespace test failures - except
on x86 / x86_64, where feraiseexcept is inline (for the relevant
constant arguments) in bits/fenv.h.
This patch fixes this by making those functions call __feraiseexcept
instead. All changes are applied to all architectures rather than
considering the possibility that some might not be needed in some
cases (e.g. x86) as it seems most maintainable to keep architectures
consistent.
Where __feraiseexcept does not exist, it is added, with feraiseexcept
made a weak alias; where it is a strong alias, it is made weak.
libm_hidden_def / libm_hidden_proto are used with __feraiseexcept
(this might in some cases improve code generation for existing calls
to __feraiseexcept in some code on some architectures). Where there
are dummy feraiseexcept macros (on architectures without
floating-point exceptions support, to avoid compile errors from
references to undefined FE_* macros), corresponding dummy
__feraiseexcept macros are added. And on x86, to ensure
__feraiseexcept calls still get inlined, the inline function in
bits/fenv.h is refactored so that most of it can be reused in an
inline __feraiseexcept in a separate include/bits/fenv.h.
Calls are changed in C90/UNIX98 functions, but generally not in
functions missing from those standards. They are also changed in
libc_fe* functions (on the basis that those might be used in any libm
function), and in feupdateenv (on the same basis - may be used, via
default libc_*, in any libm function - of course feupdateenv will need
changing to __feupdateenv in a subsequent patch to make that fully
namespace-clean).
No __feraiseexcept is added corresponding to the feraiseexcept in
powerpc bits/fenvinline.h, because that macro definition is
conditional on !defined __NO_MATH_INLINES, and glibc libm is built
with -D__NO_MATH_INLINES, so changing internal calls to use
__feraiseexcept should make no difference.
Tested for x86_64 (testsuite; the only change in disassembly of
installed shared libraries is a slight code reordering in clog10, of
no apparent significance). Also tested for MIPS, where (in the
configuration tested) it eliminates math.h linknamespace failures for
n32 and n64 (some for o32 remain because of other issues).
[BZ #17723]
* include/fenv.h (__feraiseexcept): Use libm_hidden_proto.
* math/fraiseexcpt.c (__feraiseexcept): Use libm_hidden_def.
* sysdeps/aarch64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/arm/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/hppa/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/i386/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/ia64/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/m68k/coldfire/fpu/fraiseexcpt.c (feraiseexcept):
Likewise.
* sysdeps/microblaze/math_private.h (__feraiseexcept): New macro.
* sysdeps/mips/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/powerpc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/powerpc/nofpu/fraiseexcpt.c (__feraiseexcept): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fraiseexcpt.c
(__feraiseexcept): Likewise.
* sysdeps/s390/fpu/fraiseexcpt.c (feraiseexcept): Rename to
__feraiseexcept and define as weak alias of __feraiseexcept. Use
libm_hidden_weak.
* sysdeps/sh/sh4/fpu/fraiseexcpt.c (feraiseexcept): Likewise.
* sysdeps/sparc/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
* sysdeps/tile/math_private.h (__feraiseexcept): New macro.
* sysdeps/unix/sysv/linux/alpha/fraiseexcpt.S (__feraiseexcept):
Use libm_hidden_def.
* sysdeps/x86_64/fpu/fraiseexcpt.c (__feraiseexcept): Use
libm_hidden_def.
(feraiseexcept): Define as weak not strong alias. Use
libm_hidden_weak.
* sysdeps/x86/fpu/bits/fenv.h (__feraiseexcept_invalid_divbyzero):
New inline function. Factored out of ...
(feraiseexcept): ... here. Use __feraiseexcept_invalid_divbyzero.
* sysdeps/x86/fpu/include/bits/fenv.h: New file.
* math/e_scalb.c (invalid_fn): Call __feraiseexcept instead of
feraiseexcept.
* math/w_acos.c (__acos): Likewise.
* math/w_asin.c (__asin): Likewise.
* math/w_ilogb.c (__ilogb): Likewise.
* math/w_j0.c (y0): Likewise.
* math/w_j1.c (y1): Likewise.
* math/w_jn.c (yn): Likewise.
* math/w_log.c (__log): Likewise.
* math/w_log10.c (__log10): Likewise.
* sysdeps/aarch64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/aarch64/fpu/math_private.h
(libc_feupdateenv_test_aarch64): Likewise.
* sysdeps/alpha/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/arm/fenv_private.h (libc_feupdateenv_test_vfp): Likewise.
* sysdeps/arm/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/ia64/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/m68k/fpu/feupdateenv.c (__feupdateenv): Likewise.
* sysdeps/mips/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/powerpc/fpu/e_sqrt.c (__slow_ieee754_sqrt): Likewise.
* sysdeps/s390/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sh/sh4/fpu/feupdateenv.c (feupdateenv): Likewise.
* sysdeps/sparc/fpu/feupdateenv.c (__feupdateenv): Likewise.
This sets __HAVE_64B_ATOMICS if provided. It also sets
USE_ATOMIC_COMPILER_BUILTINS to true if the existing atomic ops use the
__atomic* builtins (aarch64, mips partially) or if this has been
tested (x86_64); otherwise, this is set to false so that C11 atomics will
be based on the existing atomic operations.
Continuing the removal of the obsolete INTDEF / INTUSE mechanism, this
patch eliminates its use for _dl_init. Since _dl_init was already
declared with hidden visibility, creating a second hidden alias for it
was completely pointless, so this patch replaces all uses of
_dl_init_internal with plain _dl_init instead of using hidden_proto /
hidden_def (which are only needed when you want a hidden alias for a
non-hidden symbol; it's quite possible there are cases where they are
used but don't need to be because the symbol in question is not part
of the public ABI and is only used within a single library, so using
attributes_hidden instead would suffice).
Tested for x86_64 that installed stripped shared libraries are
unchanged by the patch.
[BZ #14132]
* elf/dl-init.c (_dl_init): Don't use INTDEF.
* sysdeps/aarch64/dl-machine.h (RTLD_START): Use _dl_init instead
of _dl_init_internal.
* sysdeps/alpha/dl-machine.h (RTLD_START): Likewise.
* sysdeps/arm/dl-machine.h (RTLD_START): Likewise.
* sysdeps/hppa/dl-machine.h (RTLD_START): Likewise.
* sysdeps/i386/dl-machine.h (RTLD_START): Likewise.
* sysdeps/ia64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/m68k/dl-machine.h (RTLD_START): Likewise.
* sysdeps/microblaze/dl-machine.h (RTLD_START): Likewise.
* sysdeps/mips/dl-machine.h (RTLD_START): Likewise.
* sysdeps/powerpc/powerpc32/dl-start.S (_start): Likewise.
* sysdeps/s390/s390-32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sh/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (RTLD_START): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/tile/dl-start.S (_start): Likewise.
* sysdeps/x86_64/dl-machine.h (RTLD_START): Likewise.
* sysdeps/x86_64/x32/dl-machine.h (RTLD_START): Likewise.
This patch refactors how soft-fp comparisons handle setting exceptions
for NaN operands, so that exceptions are set through the FP_CMP macros
rather than directly in the C files calling them.
The _FP_CMP* and FP_CMP* macros gain an extra argument to specify when
exceptions should be set, 0 for no exception setting (I'm not sure
this is actually needed - at least it's not needed for IEEE operations
in glibc / libgcc, but might be relevant in some cases for kernel
use), 1 for exceptions only for signaling NaNs and 2 for exceptions
for all NaNs. This argument is handled through _FP_CMP_CHECK_NAN,
newly called by the _FP_CMP* macros when a NaN is encountered. Calls
to these macros are updated, which eliminates all the existing
checking and exception setting in soft-fp *.c files in glibc.
Tested for powerpc-nofpu. (The __unord* functions have no code
changes; the __eq* / __ge* / __le* functions get slightly larger, but
I don't think that's significant.)
* soft-fp/op-common.h (_FP_CMP_CHECK_NAN): New macro.
(_FP_CMP): Add extra argument EX. Call _FP_CMP_CHECK_NAN.
(_FP_CMP_EQ): Likewise.
(_FP_CMP_UNORD): Likewise.
* soft-fp/double.h (FP_CMP_D): Add extra argument EX.
(FP_CMP_EQ_D): Likewise.
(FP_CMP_UNORD_D): Likewise.
* soft-fp/extended.h (FP_CMP_E): Likewise.
(FP_CMP_EQ_E): Likewise.
(FP_CMP_UNORD_E): Likewise.
* soft-fp/quad.h (FP_CMP_Q): Likewise.
(FP_CMP_EQ_Q): Likewise.
(FP_CMP_UNORD_Q): Likewise.
* soft-fp/single.h (FP_CMP_S): Likewise.
(FP_CMP_EQ_S): Likewise.
(FP_CMP_UNORD_S): Likewise.
* soft-fp/eqdf2.c (__eqdf2): Update call to FP_CMP_EQ_D.
* soft-fp/eqsf2.c (__eqsf2): Update call to FP_CMP_EQ_S.
* soft-fp/eqtf2.c (__eqtf2): Update call to FP_CMP_EQ_Q.
* soft-fp/gedf2.c (__gedf2): Update call to FP_CMP_D.
* soft-fp/gesf2.c (__gesf2): Update call to FP_CMP_S.
* soft-fp/getf2.c (__getf2): Update call to FP_CMP_Q.
* soft-fp/ledf2.c (__ledf2): Update call to FP_CMP_D.
* soft-fp/lesf2.c (__lesf2): Update call to FP_CMP_S.
* soft-fp/letf2.c (__letf2): Update call to FP_CMP_Q.
* soft-fp/unorddf2.c (__unorddf2): Update call to FP_CMP_UNORD_D.
* soft-fp/unordsf2.c (__unordsf2): Update call to FP_CMP_UNORD_S.
* soft-fp/unordtf2.c (__unordtf2): Update call to FP_CMP_UNORD_Q.
* sysdeps/alpha/soft-fp/ots_cmpe.c (internal_compare): Update call
to FP_CMP_Q.
* sysdeps/sparc/sparc32/soft-fp/q_cmp.c (_Q_cmp): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc32/soft-fp/q_cmpe.c (_Q_cmpe): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_feq.c (_Q_feq): Update call to
FP_CMP_EQ_Q.
* sysdeps/sparc/sparc32/soft-fp/q_fge.c (_Q_fge): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc32/soft-fp/q_fgt.c (_Q_fgt): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_fle.c (_Q_fle): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_flt.c (_Q_flt): Likewise.
* sysdeps/sparc/sparc32/soft-fp/q_fne.c (_Q_fne): Update call to
FP_CMP_EQ_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_cmp.c (_Qp_cmp): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_cmpe.c (_Qp_cmpe): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_feq.c (_Qp_feq): Update call to
FP_CMP_EQ_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_fge.c (_Qp_fge): Update call to
FP_CMP_Q.
* sysdeps/sparc/sparc64/soft-fp/qp_fgt.c (_Qp_fgt): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_fle.c (_Qp_fle): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_flt.c (_Qp_flt): Likewise.
* sysdeps/sparc/sparc64/soft-fp/qp_fne.c (_Qp_fne): Update call to
FP_CMP_EQ_Q.
As noted in
<https://sourceware.org/ml/libc-alpha/2013-10/msg00516.html>, the
soft-fp macro FP_CLEAR_EXCEPTIONS should not be necessary, as soft-fp
code should never set an exception and later clear it.
In fact, all four uses in glibc (for SPARC) are indeed unnecessary:
they appear in files that convert 32-bit or 64-bit integers to IEEE
binary128, an operation that can never raise any exceptions. If this
was intended to enable the compiler to optimize away any FP_FROM_INT
code testing for exceptional cases, we now have a better way of doing
this: defining FP_NO_EXCEPTIONS before including soft-fp.h causes all
code handling exceptions to be stubbed out, and the rounding mode to
be hardwired for round-to-zero, to allow such optimizations for source
files where (a) the operation in question, for the particular types in
question, can never raise exceptions, but (b) some instances of the
operation for other types can, so the macros used in the file do
contain references to rounding or exceptions, albeit dead in that
particular file.
The uses in the Linux kernel are also unnecessary (clearing exceptions
at a point where they are already cleared).
This patch duly removes FP_CLEAR_EXCEPTIONS, making the SPARC code in
question use FP_NO_EXCEPTIONS and stop using exception-related macros.
* soft-fp/soft-fp.h (FP_CLEAR_EXCEPTIONS): Remove macro.
* sysdeps/sparc/sparc32/soft-fp/q_itoq.c: Define FP_NO_EXCEPTIONS.
(_Q_itoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_lltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_lltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_ulltoq.c: Define FP_NO_EXCEPTIONS.
(_Q_ulltoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
* sysdeps/sparc/sparc32/soft-fp/q_utoq.c: Define FP_NO_EXCEPTIONS.
(_Q_utoq): Do not use FP_DECL_EX, FP_CLEAR_EXCEPTIONS or
FP_HANDLE_EXCEPTIONS.
This patch defines ELF_MACHINE_NO_RELA on all architectures. Tested
only on x86_64 to verify that the sources before and after are
identical except for two instructions that pass the current line
number in dl-machine.h to assert_fail.
This patch makes non-ex-ports architectures set base_machine and
machine based on the original configured machine value in preconfigure
fragments, like ex-ports architectures, rather than in the toplevel
configure.ac.
Tested x86 that the disassembly of installed shared libraries is
unchanged by the patch.
* configure.ac (base_machine): Do not set specially for particular
machines here.
* configure: Regenerated.
* sysdeps/powerpc/preconfigure: Move machine and base_machine
settings from configure.ac.
* sysdeps/i386/preconfigure: New file.
* sysdeps/s390/preconfigure: Likewise.
* sysdeps/sh/preconfigure: Likewise.
* sysdeps/sparc/preconfigure: Likewise.
Errno is not set and the testcases will fail.
Now the scalbln-aliases are removed in i386/m68
and the wrappers are used when calling the scalbln-functions.
On ia64 only scalblnf has its own implementation.
For scalbln and scalblnl the ieee754/dbl-64 and ieee754/ldbl-96 are used, thus
the wrappers are needed, too.
This patch relies on the C version of the rwlocks posted earlier.
With C rwlocks it is very straight forward to do adaptive elision
using TSX. It is based on the infrastructure added earlier
for mutexes, but uses its own elision macros. The macros
are fairly general purpose and could be used for other
elision purposes too.
This version is much cleaner than the earlier assembler based
version, and in particular implements adaptation which makes
it safer.
I changed the behavior slightly to not require any changes
in the test suite and fully conform to all expected
behaviors (generally at the cost of not eliding in
various situations). In particular this means the timedlock
variants are not elided. Nested trylock aborts.
[BZ #16885]
* sysdeps/sparc/sparc64/strcmp.S: Fix end comparison handling when
multiple zero bytes exist at the end of a string.
Reported by Aurelien Jarno <aurelien@aurel32.net>
* string/test-strcmp.c (check): Add explicit test for situations where
there are multiple zero bytes after the first.
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
elf/tst-auxv.c includes misc/sys/auxv.h, which ends up not actually
being included due to the guard overlap, and getauxval becomes an
implicit declaration and implicit pointer conversion which means, at
best, the test isn't actually testing what it thinks it is and, at
worst, it'll crash and burn on platforms where implict pointer
conversion is a Very Bad Thing.
* sysdeps/powerpc/bits/hwcap.h: Allow _SYSDEPS_SYSDEP_H guard as a
synonym for _SYS_AUXV_H to allow direct inclusion.
* sysdeps/sparc/bits/hwcap.h: Likewise.
* sysdeps/powerpc/sysdep.h: Define _SYSDEPS_SYSDEP_H instead of
_SYS_AUXV_H so we can include sysdep.h and sys/auxv.h together.
* sysdeps/sparc/sysdep.h: Likewise.
IEEE 754-2008 defines two ways in which tiny results can be detected,
"before rounding" (based on the infinite-precision result) and "after
rounding" (based on the result when rounded to normal precision as if
the exponent range were unbounded). All binary operations on an
architecture must use the same choice of how tininess is detected.
soft-fp has so far implemented only before-rounding tininess
detection. This patch adds support for after-rounding tininess
detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that
sfp-machine.h must define (soft-fp is meant to be self-contained so
the existing tininess.h files aren't used here, though the information
going in sfp-machine.h has been taken from them). The soft-fp macros
dealing with raising underflow exceptions then handle the cases where
the choice matters specially, rounding a copy of the input to the
appropriate precision to see if a value that's tiny before rounding
isn't tiny after rounding.
Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so
supporting exceptions and rounding modes for long double where not
previously supported - this is the immediate motivation for doing this
patch now) together with (a) a patch to sysdeps/mips/math-tests.h to
enable exceptions / rounding modes tests for long double for GCC 4.9
and later, and (b) corresponding changes applied to libgcc's soft-fp
and sfp-machine.h files. In the libgcc context this is also tested on
x86_64 (also an after-rounding architecture) with testcases for
__float128 that I intend to add to the GCC testsuite when updating
soft-fp there.
(To be clear: this patch does not fix any glibc bugs that were
user-visible in past releases, since after-rounding architectures
didn't use soft-fp in any affected case with support for
floating-point exceptions - so there is no corresponding Bugzilla bug.
Rather, it works together with the GCC changes to use soft-fp on MIPS
to allow previously absent long double functionality to work properly,
and allows soft-fp to be used in glibc on after-rounding architectures
in cases where it couldn't previously be used.)
* soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly
unused.
(_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted
value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in
subnormal range.
(_FP_PACK_CANONICAL): Determine tininess based on rounding to
normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded
value has largest subnormal exponent.
* soft-fp/soft-fp.h [FP_NO_EXCEPTIONS]
(_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0.
* sysdeps/aarch64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): New macro.
* sysdeps/alpha/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/mips/mips64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/mips/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/powerpc/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
* sysdeps/sparc/sparc32/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/sparc/sparc64/soft-fp/sfp-machine.h
(_FP_TININESS_AFTER_ROUNDING): Likewise.
* sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING):
Likewise.
[BZ #16150]
* sysdeps/sparc/sparc64/multiarch/add_n.S: Resolve to the correct generic
symbol in the non-vis3 case in static builds.
* sysdeps/sparc/sparc64/multiarch/addmul_1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/mul_1.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/sub_n.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/submul_1.S: Likewise.
We cannot use fnegd in this code, as fnegd was added in v9.
Only fnegs exists in v8 and earlier.
[BZ #15985]
* sysdeps/sparc/sparc32/fpu/s_fdim.S (__fdim): Do not use fnegd
on pre-v9 cpus, use a fnegs+fmovs sequence instead.
Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The pointer guard used for pointer mangling was not initialized for
static applications resulting in the security feature being disabled.
The pointer guard is now correctly initialized to a random value for
static applications. Existing static applications need to be
recompiled to take advantage of the fix.
The test tst-ptrguard1-static and tst-ptrguard1 add regression
coverage to ensure the pointer guards are sufficiently random
and initialized to a default value.
Resolves: #15465
The program name may be unavailable if the user application tampers
with argc and argv[]. Some parts of the dynamic linker caters for
this while others don't, so this patch consolidates the check and
fallback into a single macro and updates all users.
[BZ #15442] This adds support for the inverse interpretation of the
quiet bit of IEEE 754 floating-point NaN data that some processors
use. This includes in particular MIPS architecture processors; the
payload used for the canonical qNaN encoding is updated accordingly
so as not to interfere with the quiet bit.
* sysdeps/sparc/sparc32/sparcv9/bits/atomic.h
(__arch_compare_and_exchange_val_32_acq): Use %g0 as second
argument of CAS if possible.
* sysdeps/sparc/sparc64/bits/atomic.h
(__arch_compare_and_exchange_val_32_acq): Likewise.
(__arch_compare_and_exchange_val_64_acq): Likewise.
