This was documented, but not what the code did.
Task-number: QTBUG-48529
Change-Id: I4849778c61dcae13be27c62b24717693c0c07d78
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will be used in QTextStream to speed up padding processing.
[ChangeLog][QtCore][QString] Added resize(int, QChar) overload.
Change-Id: Id51f8cdacb167310157100b05cacf20e9a5d2716
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Probably correct.
The question is just why this code has survived for so many years.
Change-Id: Iaf01850476f9b066243abebb9ee6c5928d7ada19
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test produces compiler warnings in release builds:
tst_qgraphicswidget.cpp: In member function 'void tst_QGraphicsWidget::setTabOrderAndReparent()':
tst_qgraphicswidget.cpp:1521:89: warning: 'w2' may be used uninitialized in this function [-Wmaybe-uninitialized]
tst_qgraphicswidget.cpp:1536:88: warning: 'w1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Use arrays instead of the variables w1,2... and rewrite the helper
function compareFocusChain() to work on iterators allowing to
remove some temporary lists. Also return error messages in a
QByteArray ready for the Q[TRY_]VERIFY2 macros.
Change-Id: I43466921af59521d1faf00b75fe943508418abb3
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
/home has been observed to be writable on some CI machines.
Add checks verifying existence and correct permissions.
Change-Id: Ie0f952e20d0d8eb0b57234eea2e2ecb78f5a7b58
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If the variant contains a known json type (value, array, object or
document), simply unwrap those. In the case of the json document
wrap the contained object/array into a QJsonValue.
This should be the expected behavior, and makes more sense than
returning a null QJsonValue.
Task-number: QTBUG-41234
Change-Id: Id084fc11220d51aaf78b7694fd0ebef1411f5c51
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Path normalization should happen only when NormalizePathSegments is set.
Use a less intrusive fix for the setPath("//path") issue that
commit aba336c2b4 was about.
This allows fromLocalFile("/tmp/.") to keep the "/." at the end,
which is useful for appending to the path later on (e.g. to get "/tmp/.hidden")
Change-Id: Ibc3d4d3276c1d3aaee1774e21e24d01af38fa880
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the environment variable is set, but points to a non-existing directory,
the user would get a warning about chmod failing. Better be clear and
warn about the fact that the directory itself doesn't exist.
Also warn if $XDG_RUNTIME_DIR points to a file rather than a directory.
Task-number: QTBUG-48771
Change-Id: If84e72d768528ea4b80260afbbc18709b7b738a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This partially reverts commit 025d6a778c.
Change-Id: I7b964b0d598abe46137c22177fe2b5dcca5bb812
Task-number: QTBUG-49831
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Commit ed0c0070 introduced qt_subtract_from_timeout but used it
incorrectly in several places.
Change-Id: I80ea16088707929a45d5a61ec6f3370f8e63d1cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When the byte sequence for a BOM occurs in the middle of a utf8 stream,
it is a ZWNBSP.
When a ZWNBSP occurs in the middle of a utf8 character sequence, and the
SIMD conversion does some work (meaning: the length is at least 16
characters long), it would not recognize the fact some charactes were
already decoded. So the conversion would then strip the ZWNBSP out,
thinking it's a BOM.
The non-SIMD conversion did not have this problem: the very first
character conversion would already set the headerdone flag.
Change-Id: I39aacf607e2e068107106254021a8042d164f628
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was improved by:
- Use QCOMPARE instead of QVERIFY
- Use QTRY_ macro instead arbitrary qWait
- Use longer time line
The test executes faster and it should be less vulnerable to
an unreliable timer.
Change-Id: I92675015a6251b47eaf20b0fc916f3a36b52d783
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test run faster and it less vulnerable to an inaccurate time.
Change-Id: I19475095395dcf1e6d47fdbba5eeffabab1fc7b9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Now the test is less fragile to time and it executes 4s faster
Change-Id: Id3eb8ed2c03317e7d2f2c3cd17f889a8d8e7e5b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test still can fail because 1s is quite a short time.
Change-Id: I6f42c182f2932d5a053f6a69667210529c9a7697
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
- Do not save geometry when going from maximized->fullscreen
- Use SW_SHOWNA instead SW_SHOWNOACTIVATE as otherwise the
maximized geometry is restored.
- Add a test for Windows.
Task-number: QTBUG-49709
Change-Id: Ic81e7398ee90d499a50b02192a45cb09276a2105
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Adds NEON version of interpolate_4_pixels used by smooth upscaling, and
bilinear sampling.
The SSE2 version is reordered to match the NEON version so they have
the same order of operations and a faster version that loads directly
into vector registers.
Testing is extended so we have a test of smoothness that can catch more
possible mistakes.
Change-Id: I0de4aecf5cb79468e7c8f19f421aa24b2955547c
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
Strings do not have to be overly specific to test parser function.
Change-Id: I345dfec7fb4b8004661f6757cfd53b428ad87b6b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As for the #include-parser, the moc-detector's minimal C preprocessor
could be confused by a raw string into ignoring large chunks of code.
Change-Id: Id688e9a1f04628ce75a51a7d15269078c734288e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If a / wasn't part of a comment-start, it and the character after it
were none the less stepped over. If the character after started an
enclosure, this would duly be missed, leading to mis-parsing of the
subsequent text. As for similar bug recently fixed in findDeps().
Change-Id: Ie5329ec633c23a554b42a6351723c980e27fb9a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This extends the test suite introduced in 497f0af1f7 for
a known-to-be-good case also for 32 bit systems.
Change-Id: Ia231bcb9b0102c28483d932be18767662b7a6afd
Reviewed-by: Christian Stenger <christian.stenger@theqtcompany.com>
Previously, the geometry stored for floating dock widgets
in QPlaceHolderItem::topLevelRect and QDockAreaLayoutInfo::saveState()
included the window frame (frame position/content area size).
This does not work in the case where a floating dock widget is deleted
since the geometry is determined after reparenting the widget when the
frame geometry is no longer available. Change the behavior to store
the geometry excluding frame to avoid such problems and adapt
QDockWidgetPrivate::setWindowState() accordingly.
Task-number: QTBUG-49832
Task-number: QTBUG-45780
Change-Id: I84b5c80df6e1c9e738bbb1407b9047cc84719ce0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test is marked as blacklisted on 10.10, and it
is found to still fail in 10.11.
Task-number: QTBUG-49834
Change-Id: Ibddb1af6b61f3fca2b2aea18102bbaa5390a40d3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The C preprocessor allows backslash-newline anywhere and allows
comments anywhere it allows space. Testing wilfully perverse
applications of that revealed qmake's parsing of #include directives
wasn't very robust. So rework to actually follow the rules and add
those tests.
Change-Id: If5cc7bfb65f9994e9ab9ed216dd1ee7285c63934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This reverts commit 9a6a58a95a,
which was a work-around for a qmake bug, now fixed.
Task-number: QTBUG-19393
Change-Id: Id467bb5907a88f03eac0e29a90f4ff7e97045423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
This is used throughout Qt and resolves to
operator op(QChar, QChar)
This test makes sure we don't break those
use-cases as we fix missing relational
operators as found by tst_QStringBinOps.
In the other direction, 0 op QChar is
ambiguous, due to op(const char*, QString)
etc, so only test the uint op QChar case.
Change-Id: Ifae7fb65bf3269583898cfea3fc6c95547c75122
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Since special files have file size == -1, they were always filtered
out by QFileSystemModel, even when passing QDir::System as filtering
option. Keep them instead.
The testcase is more convoluted than it should be because QFSM
is so broken that it returns valid indexes for invisible elements
in the model (such as filtered out elements).
Change-Id: I023a9813dbfeed7be99dded42c66b1191afdc17e
Task-number: QTBUG-20968
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test was comparing an "unsorted" file listing read from disk
with a reference listing, checking whether the two were different.
Obviously that's a nonsense test, as there's no stable order
for the entries returned by readdir_r and friends.
Change-Id: I1d781a6513c42bb0b585d02e57a771c5336c7df4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
I still have no idea how to fix this properly given the absolute mess
of QWidgetLineControl. For now add a failing test.
Change-Id: Ieb5ad6994c8ce7deb0cd0f2f47d51073d042244e
Task-number: QTBUG-49295
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The parser in QMakeSourceFileInfo::findDeps() would step over the
closing quote of a string, only to have a for loop then step over the
character just after that closing quote, which was thus never studied;
this could lead to problems in various ways. Fixed that and expanded
findDeps() test to catch regressions.
Task-number: QTBUG-17533
Change-Id: I7dec5222e38fa188495b39376ffee70bc7bbc87f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It makes little sense to give focus to a hidden widget; in order
to make the treeview visible, we need to set the view mode to Detail.
Change-Id: I453111e83593a790a656651b603a9c9b1a78dd9d
Task-number: QTBUG-7690
Reviewed-by: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
... otherwise we would not detect subsequent file/directories added
into the non-removed one.
Change-Id: I43018dfb9a9c6c0399190800da3f0d572ec5d8d8
Task-number: QTBUG-49307
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Added method
setCreateProcessArgumentsModifier to QProcess on Windows to enable
users to intercept and modify CreateProcess parameters.
With such a modifier, calling code can decide whether to inherit
handles, modify the STARTUPINFO struct, and pass its own
combination of process flags to CreateProcess.
Task-number: QTBUG-390
Task-number: QTBUG-6917
Task-number: QTBUG-9350
Task-number: QTBUG-24619
Change-Id: I14757dbbacfebb1c89f52402d36fba0ba9c45f3a
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When a QLineEdit is readonly there's a discrepancy between key press
events and shortcut override events. For instance, presses Ctrl+C
copies the text unless there's also a shortcut for the same key sequence.
In this case, the shortcut override event is not handled, and no text
is copied. Fix it by splitting the handling of shortcut override
events between "read only" access (copy, select, etc.), which still
makes sense on a read only line edit, and write access (paste, ...)
which doesn't.
[ChangeLog][Important Behavior Changes][QLineEdit] QLineEdit will
now accept certain shortcut override events even if it is read only.
Change-Id: Ie5b048259b99a1eff0581129e3ad97f27a88fe86
Task-number: QTBUG-21217
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The documentation says that we scroll one pixel, but changing the
behavior in 934f062203 to do that
was not well received.
People were relying on the undocumented behavior - and the new behavior
was considered to be a regression. (Nobody called setSingleStep since
Qt in many cases provide a reasonable singleStep - which implied that their
programs scrolled with 1 pixel which was quite slow). Furthermore getting
the old behavior (auto set of single step) was nearly impossible.
However the revert (done in 0e69230d02)
gets us back to QScrollbar::setSingleStep not working in pixel scroll mode
(even without it being documented - but we should also have a working API
rather than documenting that it is not working)
The previous approach was directly prevented Qt from changing
single step (on e.g resize) at all. This patch only prevents Qt from
changing when a user explicitly has called the function
QScrollBar::setSingleStep (in pixel scroll mode).
That is we expect that calls to setSingleStep means that the user actually
wants to set the singleStep and doesn't want Qt to control that value.
Furthermore it is possible to switch back to the automatically adjusted
singlestep with QScrollBar::setSingleStep(-1).
[ChangeLog][QtWidgets][QAbstractItemView] QTBUG-7232 - In ItemViews
when scrollMode is set to scrollPerPixel, it is now possible to
change the single step. Qt will automatically adjust the single step
until setSingleStep is called. When setSingleStep is called it will
however respect the set and stop doing automatic changes of the value.
Calling setSingleStep(-1) will switch mode back to automatic adjust.
Task-number: QTBUG-7232
Change-Id: Ibfe0caa9751d3bcc11bfc6e0654a3d1ac35ac8ae
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Replace hide() call (present in itemViewKeyboardEvent since Qt 4.5)
by reject(). Add signal spy to existing test function.
QDialog doc states that reject() will always be called on Key_Escape.
hide() is not enough: it makes exec() terminate and return the proper
value, but the signals finished(int) and rejected() will not be sent.
Task-number: QTBUG-7690
Change-Id: Ica4ae2843574478c5b9a7672f871f3ef3f16f3c9
Done-with: Jan Blumschein <jan@jan-blumschein.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
If the LHS is detached and has existing capacity that is large
enough to hold the RHS, re-use the memory instead of allocating
a new buffer and throwing away the old.
Change-Id: I53d42825da92c264c7301e8e771cba9fb35c321b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][State Machine] Added constructor overload that
takes a pointer-to-member for the QSignalTransition.
Change-Id: I80ac6e16d0edf7d2ab09882b6f6db4cbd73364e1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Can't sensibly test unless the compiler does support raw strings,
since any test that would catch qmake's (prior) inability to parse raw
strings would necessarily confuse the C++ compiler in the same way.
This even applies (in test app code) to any #if-ery around the raw
string, since tokenization happens before preprocessor directives are
resolved. So the #if-ery on Q_COMPILER_RAW_STRINGS has to be in
tst_qmake.cpp, not the test app it builds.
Change-Id: I4a461f515adff288b54fb273fd9996f9b906d11c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
It should compile, since the std::shared_ptr does.
[ChangeLog][QtCore][QSharedPointer] Fixed a problem that would cause a
compilation error when constructing a QSharedPointer of a const type
when the type derives from QEnableSharedFromThis.
Task-number: QTBUG-49748
Change-Id: I8de47ed6c7be4847b99bffff141c84f5e0b6bea8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In a QPair, the member names {first, second} have no semantic
value. A simple struct, while not as featureful as QPair, can
be given meaningful member names, {rect, index}, in this case.
Change-Id: If1e289ecee82a1cb020ac3a854efd2ec1096493b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The qt_poll function calls recv to query whether fds marked by select
as readable should be marked POLLIN or POLLHUP in the pollfd structure.
On many platforms such as QNX this requires extra link-time libraries
which were not previously required by QtCore.
While the qt_poll function is intended as a fallback mechanism only for
those platforms which do not implement poll natively, the function was
compiled unconditionally whenever QT_BUILD_INTERNAL was defined, e.g.
in developer builds.
Additionally the function was included on those systems that define poll
in system headers so that configure determines build-time availability,
but do not define _POSIX_POLL > 0 or indicate POSIX:2008 compliance via
either the _POSIX_VERSION or _XOPEN_VERSION macros. On those systems a
sysconf query for _SC_POLL was performed to determine at runtime whether
to call the system poll or qt_poll.
Both of these cases are in fact counterproductive. In the first case the
sole consumer of the function is a single manual unit test. In the
second, to my knowledge no platform requires the runtime fallback.
Despite that, we were forcing an extra dylib in both cases.
Both cases are fixed by 1) moving the implementation into its own file
for the unit test to include and 2) dropping the dynamic fallback if
configure determines availability of poll at compile-time.
This also reverts commit 1377709711, which
added -lsocket for QtCore on QNX.
Change-Id: I2dd10695c5d4cac81b68d2c2558797f3cdabc153
Reviewed-by: James McDonnell <jmcdonnell@qnx.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QColor always uses unpremultiplied alpha, but the new QImage methods
were based on the QRgb versions which might be either. This patches fixes
the two new methods so they treat QColor alpha correctly.
Change-Id: I78a5b875ad4e78ad7fde3b811c6187482b4f6d15
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This follows up 130c2baa93.
Change-Id: I2f6c9b4f995af427cec9a2162b782039debf8564
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Only add C++14 to the project configuration when C++14 support is
available on the platform. Adding it because the platform supports
C++11 doesn't work when the platform _only_ supports C++11 (e.g.,
QNX 6.6.0).
Task-number: QTBUG-49491
Change-Id: I15de38bb06d912a314b9dd18c80b513cc06a855e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The file exists but it isn't listed in TESTDATA. This is only a problem
when the target is a another system as is the case with Qt for QNX.
Tests fail because the file isn't deployed.
Noticed this while testing the changes for custom spacing of JSON
output.
Task-number: QTBUG-47437
Change-Id: I098c34d2ab9027956d9233b24f30b5192ecfe96f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Use SW_SHOWNORMAL instead SW_SHOWNOACTIVATE as a parameter to
ShowWindow() to enforce the window to be restored to normal state,
even if the state before minimized was maximized.
Task-number: QTBUG-48449
Change-Id: I9436623b1495f574a72050e50e8b31bfc83ced5c
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
This function is introduced to safely provide poll(2)-like semantics for
socket multiplexing on Unix-like platforms. For platforms where no poll
system call is available, an implementation based on select(2) is provided.
Change-Id: I320e97dae5924316675a74d1897c48cae292ac6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code was extremely inefficient, and QCollator
can provide the same functionality in a much better
and faster way.
Task-number: QTBUG-30902
Change-Id: Iaf5dbe587d9a6ebca26885259fdee74a29d3c84f
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVariant was using QColor::name() to convert a color to string, which by
default loses alpha value. The patch is fixing the problem by always
including the alpha value in the string when required.
[ChangeLog][Core][Variant] QVariant(QColor)::toString() uses
QColor::HexArgb format when the alpha component is different from 1.
Task-number: QTBUG-37851
Change-Id: I887460c1ea151180ba99d64dd873ba9d6e2268f2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
In QMenuPrivate::hideMenu(), delay clearing of 'causedPopup.widget'
to after the QMenu::close() call, so that it is still accessible
in QMenu::hideEvent() which calls QMenuBarPrivate::setCurrentAction(0)
if the caused widget is a QMenuBar.
Task-number: QTBUG-47377
Task-number: QTBUG-49592
Change-Id: Idbda48e918dae799afea84068a60d7383d7b4971
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The platform window geometry can be misleading until it has
been properly positioned and
QWindowPrivate::resizeEventPending has been cleared.
Task-number: QTBUG-49588
Task-number: QTBUG-48396
Change-Id: Ie065f62478fc8522a9ad51391bb897510afa5aad
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Remove unused ctors and dtor, add Q_OBJECT, indent,
privatize slots, don't check for nullptr before
delete'ing a pointer, and add one override keyword.
Setting test_box (a QPointer) to nullptr is already
done by the variable's default ctor.
Change-Id: I13f06dc8104ef1c0ac08a25c960641c076f10499
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Replace hardcoded interval by QTRY_COMPARE() ensuring that all tasks have
finished, since otherwise QThreadPool::tryStart() fails in the next run.
Remove blacklisting for MSVC2012 since it is not compiler-specific.
Task-number: QTBUG-49654
Change-Id: If49b6eb9ef4da4ba2911839166c397d84c175e00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Ensure the test works in a working directory with read-only
permission and that the file names are unique.
The test can then be executed repeatedly by COIN even in case
left-over hanging process helpers still lock the files. Also
disambiguate the "data" files used by various tests.
Task-number: QTBUG-47370
Change-Id: I3b9c7b70828da78f400196fcbba27bc61ea4538f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce constants and make the interval for the 2nd thread a bit
longer.
Task-number: QTBUG-49653
Change-Id: I92ac0494ec6c9af5bde858007d08e26210215434
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce a base class for the threads that ensures termination in the
destructor to ensure all QThreads instantiated on the stack are terminated.
This should reduce crashes since the test thread classes have pointers
to stack variables of the test slots.
Set object names on the threads for better diagnostics.
Decouple wakeOne()/wakeAll() that impact each other via the static count
variables of the thread class by introducing a base class WakeThreadBase
keeping a pointer to an QAtomicInt count variable on the stack instead
(similar to the existing pointers to the mutexes, etc).
Task-number: QTBUG-49653
Change-Id: I73537386bf36019efa81e8e24ba9af92506f7794
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It was used to verify waitForFinished() and printed QProcess::errorString()
on failure, which is misleading, since the process is not
in an error state - it is still running. Example:
QWARN : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() QProcess error: 5: Unknown error
FAIL! : tst_QProcess::setStandardOutputFileAndWaitForBytesWritten() 'ret' returned FALSE. ()
Use a plain QVERIFY instead.
Task-number: QTBUG-47370
Change-Id: Iacfa6e1a5ffd2be4e1257a27a400ccc59671e8c8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Silence warning:
Don't know how to handle 'hint', use qRegisterMetaType to register it.
Task-number: QTBUG-49623
Change-Id: Iec0a823c7af87eddd9a3f126a1b970da1ff2f03f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On Windows, the wrong value was used to calculate the
design-to-device scale. The assumption has been that tmHeight
in the TEXTMETRIC is the pixel size of the em square, but
it is not, it's the height of the font (ascent + descent).
The pixel size of the font is defined to be the em square size
in pixels.
On OS X, the kerning data was never actually read from the
font. I've added a lazy initialization for this similar to
the one in the FT engine.
This was discovered when investigating QTBUG-48546, as it turned
out that the kerning information extracted by Qt in this case was
different from the one used by Harfbuzz.
I've changed testfont.ttf to kern "_2" so that the digit is positioned
directly on top of the underscore and constructed a test.
[ChangeLog][QRawFont] Fixed kerning on advances in QRawFont for
OS X and Windows.
Change-Id: Ic9a321ad119ea880cef89b861c75a820ab8d3182
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use a QTemporaryFile in readFromFileAfterJunk() instead writing
to the current directory which might not have write permission.
Enclose each call to QFile::open() in QVERIFY2() with error message.
Change-Id: I3c5da31c6681a2396cee473cafe7d92c5c220de3
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Create a temporary directory instead of writing to the
test data directory or home path (Android).
Change-Id: I6af583e5da91eefb603eaae179e7d789487dc626
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
VS2010 is not supported in Qt5.7+
Task-number: QTBUG-31611
Change-Id: I4b2bd703f6462e6f0a4de9e75bca8316b8707680
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Ubuntu 10.04 is not supported anyways in Qt 5.7+
Task-number: QTBUG-25293
Change-Id: I6420f76b12835aca268455341b46be61e9a2b143
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The EcmaScript format for printing doubles in exponent form differs
from Qt's format only in this aspect. EcmaScript explicitly prohibits
leading zeroes in exponents. It is thus worthwhile to add those flags
in order to be able to generate and parse doubles in compliance with
EcmaScript.
[ChangeLog][QtCore][QLocale] Additional flags in QLocale::NumberOption
allow generating and parsing doubles in EcmaScript compliant format.
Change-Id: Ia7b82c2e67bb8b80bd890014ff5cd4563faf2a03
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Also use this for converting doubles with QVariant. We generally want
exact results there, rather than adding rounding errors whenever we
convert.
[ChangeLog][QtCore][QLocale] Added special value for double conversion
precision to get shortest accurate representation.
Change-Id: I905b8a103f39adf31d24b6ce2c8a283cf271b597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Check that we can use std::forward, and that the compiler
synthesizes move special member functions when it should.
MSVC only supports the latter since the Nov 2013 CTP,
which, for our intents and purposes, means VC2015.
Change-Id: I8d8e4ae064abce90076a05b3b637950ab7d21dac
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QString::asprintf() has the ability to take a ushort* array as
obtained from QString::utf16() and insert that into the output
with an %ls conversion.
But no-one ever used this, because just passing QString::utf16()
to QString::asprintf() creates a warning about wchar_t* expected,
but ushort* provided.
The new qUtf16Printable() macro adds the necessary casts (via void*
to prevent any "type-punned pointer" warnings) to make
passing QString::utf16() to QString::asprintf() work silently.
This should greatly reduce the need to do a round-trip via utf-8
just to print the contents of a QString.
[ChangeLog][QtCore] Added qUtf16Printable().
Change-Id: I7ddd8d2b2a2191c9faa26aca95d49850d94b287c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check that it works on C arrays, with auto type deduction
and with types that only provide free begin()/end()
functions that can only be found through ADL.
Change-Id: I760722a0f56c9ebe967070ff68af90b96ed77e66
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A loop to skip space and comments was meant to break on anything else
but would have not broken on a division operator (where it should) due
to it getting caught in the check for a comment-start, without falling
back suitably when it didn't complete that check.
Managed to contrive a suitably twisted change to findDeps test to
reveal the bug; broken previously, now fixed. Not ideal, as it relied
on another bug to fail previously - backslash-newline shouldn't end a
preprocessing directive line - but it should still pass once that's
fixed, too. Exercising a bug in qmake usually involves code that
won't compile anyway, making it tricky to write a test that reveals
the bug but that passes once it's fixed.
Change-Id: I08a1d7cc5e3d7fd1ac0a48e5c09dfdfbb7580b11
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... at the cost of a bunch of warnings about
ushort*/wchar_t*.
It wasn't checked at all, which isn't really a solution,
either.
Split off the %s checks into a separate function, which
makes obvious the sorry state of sprintf non-%s, non-%d
testing that's left.
Change-Id: I6312f984bacfb568b609e34b5218b3ab9a9765c4
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In C++, signed overflow math is Undefined Behavior. However, many CPUs
do implement some way to check for overflow. Some compilers expose
intrinsics to use this functionality. If the no intrinsic is exposed,
overflow checking can be done by widening the result type and "manually"
checking for overflow. Or, for X86, by using inline assembly to use the
CPU features.
Used in QtQml.
Change-Id: I2ef2523ccaa98f6757a45e24862a2fa730a26bb0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QOpenGLWidget and QQuickWidget do not support having native
child widgets inside the same top-level window. In some cases this is
inevitable, f.ex. multimedia may require native windows when used from
widget apps. winId() calls made for various (valid or invalid) reasons
are also problematic.
There are no blockers for supporting this setup, however. By storing
multiple texture lists (one for each subtree where the root is a
native widget), adding the missing markDirtyOnScreen calls, letting
each native widget access the correct texture list (i.e. the one
corresponding to its children) when they are (separately) flushed, and
fixing composeAndFlush() to take the update region and the (native
child) offset into account, it can all be made functional.
The change also fixes the issue of keeping GL-based compositing
enabled even after all render-to-texture widgets in the window become
hidden. Due to the changes of how such widgets are gathered,
composeAndFlush() is not invoked anymore when no such widgets are
discovered for a given native parent. This is great since having
compositing enabled infinitely is an issue for applications like Qt
Creator that implement certain views with QQuickWidgets but cannot
afford the cost of texture uploads in other places (e.g. for the text
editor) on slower machines.
The openglwidget manual test is greatly enhanced to test various
situations (MDI, scroll areas, tab widgets, QOpenGLWidget as native
child, QOpenGLWidget with non-tlw native parent, etc.)
Task-number: QTBUG-48130
Task-number: QTBUG-49172
Change-Id: Iad098359c8bcf749f01c050da0853415e1550eda
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The ppm decoder used a fixed size buffer to discard comment lines,
which would fail for comments longer than 100 characters.
Task-number: QTBUG-49414
Change-Id: I92e910e025cf7584a6ff1c0e5b0e8a4ab281d479
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Call begin/endResetModel() in QSqlQueryModel and all
derived classes.
Task-number: QTBUG-49404
Change-Id: I11492d6386efb4c945c246a6379aaa6ca4502a25
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
When that happens, we need to detach (in-place conversion won't work),
so we recurse back into the same function, but the template version that
does detaching.
Task-number: QTBUG-49181
Change-Id: Idba8c29717f34c70a58fffff1412fea3acc95f98
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Extend the current BLACKLIST to cover all all Windows versions
and add watchFileAndItsDirectory:native backend-testfile.
Task-number: QTBUG-30943
Change-Id: Ic58c090f23d3584843bc1e74eba533d75c530ad3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The file exists and it's listed in json.qrc (for Android) but it isn't
listed in TESTDATA. This is only a problem when the target is a another
system as is the case with Qt for QNX. One of the tests fails because
the file isn't deployed.
Noticed this while testing the changes for custom spacing of JSON
output.
Task-number: QTBUG-47437
Change-Id: I627592a5a225f50fdb8e3cdd6ac72dff43936ae5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apple changed some enums in the 10.11 SDK from being just:
enum { ... }; typedef uint64_t Foo;
to:
typedef CF_ENUM(uint64_t, Foo) { ... };
which in C++11 mode expands to:
typedef enum Foo : uint64_t Foo; enum Foo : uint64_t { ... };
The use of strongly typed enums means we need to explicitly cast from
int in the places where we know what we are doing.
Change-Id: I7c8cfdbc0549471a3292de14d8b766fe17133e25
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
This is due to the Gtk style in use. It is already blacklisted for
Ubuntu and in Qt 5.7 we'll use Gtk 3, so there is no reason to invest
into fixing this.
The test used to pass because we would build with -no-gtkstyle.
Change-Id: I1cf26301ba8b19be9a995837b0b5984838ec777a
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
tst_qmenubar::taskQTBUG4965_escapeEaten
tst_qtabbar::sizeHints
These tests will not pass when Gtk style is enabled, similar to the Ubuntu
blacklisting.
Change-Id: I590d84fb7ce0df28d0e8525e0f04b676280a12ff
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
The test is new and something seems to go wrong on the Ubuntu test
machines.
Since it ends up failing a lot, blacklist it for the time being.
Task-number: QTBUG-49388
Change-Id: I06de7ba15aaee68351a747e3a06c0150018b39de
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Test that stepping into the missing hour lands us somewhere sane.
Check that raw instance and product of .toLocalTime() agree.
Task-number: QTBUG-49008
Change-Id: I430382ae223bcb43b151d2d6054ecbdd7edc8a47
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is follow-up for QTabBar fix ea47d152b3.
In native OS X applications using mouse wheel on combo boxes have absolutely no
effect. We should bring the same behavior to Qt based OS X apps too, as users
are complaining of unexpected behavior, eg. randomly switching Qt Creator
sidebar mode when scrolling file list and moving mouse pointer little bit
above. Moreover inertial mouse behavior on OS X makes combo box usually move
several indexes, rather than single one on slight finger slide.
This also applies to iOS apps so the change affects all Apple platforms.
Task-number: QTBUG-10707
Change-Id: I6582265039198707ad8c2f54de96ee2a0b0e0b47
Reviewed-by: Adam Strzelecki <ono@java.pl>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Otherwise write() for my python (OS X 2.7) wants strings, which is incorrect.
Change-Id: Ibd9d050646d1039ba8370d121dd25756ceffdb7a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
As these are strongly typed, they won't implicitly convert to int, so make sure
to cast explicitly.
Change-Id: Ic8daa31c528bbd8f399ab401d0963e13db191312
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
warning: 'typemsg1' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: Ie68d279eccb003a2ca5a0116eea336cbc8776660
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Introduce class ExecCloseHelper which runs a timer
timer checking for the test candidate to become
the active modal window and closing it either
by key event or calling close.
The test then runs in 4s as opposed to 45s before.
Task-number: QTBUG-38890
Change-Id: I610fb09e6b8269d218cddc8d11abae2bd3317f9d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
(cherry picked from commit 0df5d07929)
Task-number: QTBUG-48326
Change-Id: I67d9ad36f7288c9c6bef51aa6253d7b187737601
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
* Georgian lari currency symbol
* A large collection of CJK unified ideographs
* Emoji symbols and symbol modifiers
* Letters to support the Ik language in Uganda, Kulango in
the Côte d’Ivoire, and other languages of Africa
* A set of lowercase Cherokee syllables, forming case pairs
with the existing Cherokee characters
* The Ahom script for support of the Tai Ahom language in India
* Arabic letters to support Arwi—the Tamil language written in the Arabic script
For more details, see http://www.unicode.org/versions/Unicode8.0.0/
[ChangeLog][QtCore] Unicode data updated to v.8.0
Change-Id: If255f95c9c45655b721369a116299da3cabbba0a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The behavior from before libdouble-conversion is that in case of an
overflow the OK flag is set to false, but the returned number is still
infinity, rather than 0. Also, the number of processed characters is
always set to the number of characters actually processed, unless
garbage is found.
There is an important distinction between an overflow and garbage. The
client code may accept overflows and infinity may be a valid result.
Garbage is most certainly not acceptable. Having an infinity/false result
in addition to 0/false allows the client code to distinguish those.
One application where this is useful is parsing JavaScript.
Change-Id: I4b8581568144b44fca3353c4bd9685c702762af9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A dialog embedded into QGraphicsView has Qt::WA_DontShowOnScreen set
(similar to a native dialog). It must not trigger the modal handling
though as not to lock up.
Task-number: QTBUG-49124
Change-Id: I22ce3f18d01df017b9317666770686bd4491387f
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
When rebuilding the tab bar after hiding several dock widgets,
the index gets offset.
Task-number: QTBUG-49045
Change-Id: I05f6a976ca1d8c6f7cdf6532f1a728483398eabc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On some platforms our 1200 x 1000 bytes seems to be not enough to
fill kernel buffers (socket write). But it's not a reason to fail test,
just skip it.
Task-number:QTBUG-49205
Change-Id: I13ea6f315f9318288ba054cf8bfa6cdd61e489d2
Reviewed-by: Richard J. Moore <rich@kde.org>
This test keeps on failing on Windows 8 with 32 bit.
Let's add the platform despite this one test failing.
Change-Id: Id6a2b3e0b587d3cff29d1f616d5edacfcf68746d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
This also fixes the underlying cause of QTBUG-44039 and QTBUG-43885.
You can choose between system, qt, and no libdouble-conversion
support. If you choose "no", snprintf_l and sscanf_l will be
used.
By default, system double conversion is used if the system provides a
double-conversion library. Otherwise the bundled libdouble-conversion
is built. sscanf_l and snprintf_l are not used by default as the
planned "shortest" conversion mode to produce the shortest possible
string will give less precise results when implemented with snprintf_l.
Change-Id: I8ca08a0fca5c54cf7009e48e771385614f6aa031
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If the future is finished when a watcher starts watching it, it is
perfectly reasonable for the watcher to get the finished message
promptly. If you pause the watcher before any message loops get to
run, the message presently won't get through until the watcher is
resumed, but there is no reason to guarantee that; indeed, one could
consider it somewhat perverse behavior.
So move the reportFinished() calls to after the pause()s.
Also eliminate a used-once local variable and use QTRY_VERIFY() in one
place where qWait() was used before.
Change-Id: I4bc6091fd7437a4d341be511b7a140f3d72d850e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
The previous implementations did not check the full mantissa. The result
was that certain NaN values were seen as +/-Infinity.
A nice benefit is that the generated code for this implementation is also
faster.
Task-number: QTBUG-47692
Change-Id: I1507ec579ccd9a2ab97da8cf83dabbc5d6e28597
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We want to be sure that the conversions are independent of the current
locale set by setlocale(3) and we want to test both directions of the
conversion.
Change-Id: I01be19e680588478d07fd65a48796e806e681863
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Some of the examples make no sense without bearer management and
QNetworkSession is not defined if QT_NO_BEARERMANAGEMENT, so
tst_qnetworkreply.cpp has to be adjusted.
Change-Id: Ic2f73746cba74f670ae5b5e99b0be1461ff6d182
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Skip the correct number of bytes in the read buffer when expanding '\n'
into "\r\n" upon writing.
Change-Id: I5b01fc47c330dee5c83001abf0acd7d63d790b96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This may result in incrementing an invalid iterator after the
iterator's container has changed. Also, for this to happen,
the view needs to have an active editor.
The reentrant call happens as follows in QTreeView, after the
model adds new rows to the view:
QTreeView::rowsInserted()
QAbstractItemView::rowsInserted()
QAbstractItemView::updateEditorGeometries()
QTreeView::visualRect()
QAbstractItemViewPrivate::executePostedLayout()
QTreeView::doItemsLayout()
QAbstractItemView::doItemsLayout()
QTreeView::updateGeometries()
QAbstractItemView::updateGeometries()
QAbstractItemView::updateEditorGeometries()
Other concrete item view classes may be prone to the same issue.
The fix consists in relayouting the items if needed, which should
trigger calling updateEditorGeometries() again. This doesn't
invalidate previous optimizations regarding item relayouting since
we only force relayouting when it'll be done by visualRect().
Change-Id: Id31507fdc8d9a84d50265298191d690d1a06792b
Task-number: QTBUG-48968
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Tests that window creation order doesn't affect the resulting geometry
of the parent and child windows.
Change-Id: Iff0cb5adf87107dfed4a633a67e1b4312b90e24a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When a child QWindow is shown by calling setVisible(true), we don't need to
create the platform window immediately if the parent window hasn't been
created yet.
We defer creation until the parent is created, or we're re-parented into
a created parent or made top level.
This optimization is more important now that we create the full parent
hierarchy once we decide that we need to create a child QWindow.
Change-Id: Ia4f0430f0d3709a12f41f6473c1cea6b0ef3c9cd
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If the QWindow has been created and has a platform window, we need to
ensure that the windows in the parent hierarchy also are created before
we set a new parent on the platform window, otherwise the platform window
will think that it's a top level window.
Change-Id: Icb2c3cd5411cd1eb595e8673e144095feda31df9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
To be able to create a platform window for a given QWindow we need to
sync up the parent hierarchy first, so that the newly created window
can be placed into that hierarchy.
Without creating the parent hierarchy first, the QPlatformWindow will
end up thinking it's a top level window, when in reality is represents
the platform backing of a child QWindow.
Change-Id: I2cad7759fbc118b04718e7a27ec7570ce1238757
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This test hasn't been run for years, so clean up. And besides, it's
extremely fragile and would depend on how IBM packages their OpenGL
libraries.
Change-Id: I1d0f78915b5942aab07cffff140f9db5a09ee7e2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Add a debug proxy style that wraps around an existing style and outputs
the parameters and return values of its function calls, for debugging
QStyle.
Task-number: QTBUG-47084
Task-number: QTBUG-45055
Change-Id: I638618e83bbac8ca4fdce31441bf4c913e911154
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
For Windows CE 7, a QCoreApplication was instantiated
in each test.
Change-Id: Ib579e416e47f884ef0cdf829139518fcc3910b9b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Compare against isVisibleTo() in QLineEditIconButton::actionEvent()
so that action events received before show() are handled correctly.
Fix a regression introduced by change
4dccb2ca67 for handling action
events causing side widgets to overlap when added before the widget was
shown. Use QAction::isVisible() to determine visibility.
Task-number: QTBUG-48806
Task-number: QTBUG-48899
Task-number: QTBUG-39660
Change-Id: I7a39a3b9a094f2c74cde09544f1158deb2b81cf2
Reviewed-by: David Faure <david.faure@kdab.com>
This was never a documented feature, but happended to work before Qt 5.5.
It broke because the peoperty access went into the static function and are
now prefixed with '_t->'
So restore the behavior as it was by not including the parentheses in the
member name.
Task-number: QTBUG-47695
Change-Id: Ic3509ddea7ac9abc871e71f5bfbe81d04d08e9bc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The test blacklisted have been found using CI builds logs.
Change-Id: Iac07316862cff9b5085dacdf9f35e691cff09384
Task-number: QTBUG-27571
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ieffb429efdc14aa5932b3fcdef5a18e13a62d35f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Iae76d852a1657bfb6d88e84515f30bd2f1dece6b
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Avoid duplication of slashes and use static variable for the
const part in settingsPath().
- Do not run expensive cleanup twice in init()/cleanup() as was
before by moving the code into a separate cleanupTestData()
function called from cleanup() and initTestCase().
- Use QDir::removeRecursively() (which should be able to deal
with readonly files, etc after 26bcc0565f )
instead of system calls or the special removePath() function for
CE/RT.
- Switch QStandardPaths into test mode.
Change-Id: Idcde2d17020eae1ea43e448266e3940c06f174ef
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Assuming that the target is always GL_TEXTURE_2D is not going to be sufficient
when working with EGLStreams for example where GL_TEXTURE_EXTERNAL_OES is a
must. The blitter is now changed to support multiple programs so other targets
can easily be added as well in the future, if necessary.
Change-Id: I247d30600222fb5af6305ed5d9740baa5e43e83e
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
QLatin1String wasn't really tested except as a drive-by.
Unearthed a discrepancy with docs. Fixed the docs.
Change-Id: I1246bb33888132edbc4e22da792a480a156357bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I7974ace5b34f2da43e7511044e80de1e733245ac
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Check whether the action under the mouse is enabled before closing.
Task-number: QTBUG-48493
Change-Id: I2a0669840b9b6c81dacdf179325301c02f1c0c35
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The delegate may be null in QHeaderView.
Task-number: QTBUG-48543
Change-Id: I4d3ba104b0b57431e8765271dc2dc880be096672
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I31adb60bdaf7ea243143a9244b6c4f66f38b189d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Numbers formatted in the C locale should not use group
separators by default.
[ChangeLog][QtCore][QLocale] The C locale does not use group separators
when formatting numbers any more.
Task-number: QTBUG-4044
Task-number: QTBUG-3068
Change-Id: Ia647a72efc11fecd66d22f9253562b1d4ef58168
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement as generic "@Nx" support in an exported
qt_findAtNxFile function.
3x devices now get one extra file existence test
in cases where @3x versions are not present. 1x
devices are still on the fast path where there are
no extra file system accesses.
Add an @3x image to the highdpi manual test.
Change-Id: I4ce3fc245ada01ea410abe1443ceb1e3abf7c17f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
If a macro is used with too few parameters, complaining about its
definition using '#' followed by something other than a macro
parameter name is apt to be confusing - reading the definition will
reveal that the name in fact is a macro parameter after all. The
reader needs attention directed to the invocation, not the definition.
Split the test in two: one to test the prior error message does in
fact get produced for an invalid macro definition, the other to test
the invalid invocation case.
Task-number: QTBUG-46210
Change-Id: Ie177a56d346e553bf9d67e2008a4352633afa1ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It simply is missing. We could wait for QStringView to come around, but
I need this function in uic _now_, so let's add it.
[ChangeLog][QtCore][QTextStream] Can now stream QStringRef without converting
to a QString first.
Change-Id: Idd178e0ba8a89c025f4533d46de912cbdb3883d5
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
These are for faster lookups between ID and name when one doesn't need
the full information set about the interface.
Change-Id: I7de033f80b0e4431b7f1ffff13f98d448a705c3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Now all Qt sequential containers consistently provide reverse iterators.
The associative ones, by way of not returning std::pair from op*, can't
just use std::reverse_iterator. They would miss .key() and .value() methods.
So that has to wait for 5.7.
The reverse versions of the new key_iterators can also just use
std::reverse_iterator, but I'm afraid that after bikeshedding over
keyRBegin() vs. rKeyBegin() vs. reverseKeyBegin() vs. rkbegin()
vs. krbegin() (<-- of course, what else?), it would anyway be too
late for 5.6, so defer, too.
[ChangeLog][QtCore][QLinkedList/QSet] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I58316fffade469e9a42c61d7aa1455ae3443fd94
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, only QXmlTestLogger had timers to take elapsed times
and log them. Move those into class QTestLog for access by
the loggers and output the times in the crash dump to make it
easier to spot hangs/recursion crashes.
Produces:
QFATAL : foo() Received signal 11
Function time: 22ms Total time: 23ms
A crash occurred in ...
Function time: 24ms Total time: 26ms
Task-number: QTBUG-47370
Change-Id: Ia530a63104087daffc9a15f68c15d93378b9407e
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Removed the insignificant flag so the rest of the test becomes enforcing.
This test seems to fail only on win32-msvc2010_developer-build_angle_Windows_7
Task-number: QTBUG-31611
Change-Id: Ic4818e50305e1e15eb67b505205436d3fec0ccfb
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If QTimer::singleShot() is used with a functor callback and a context
object with different thread affinity than the caller, a crash can
occur. If the context object's thread is scheduled before
connecting to QCoreApplication::aboutToQuit(), the timer has a change
to fire and QSingleShotTimer::timerEvent() will delete the
QSingleShotTimer object making the this pointer used in the
connection invalid. This can occur relatively often if an interval
of 0 is used.
Making the moveToThread() call the last thing in the constructor
ensures that the constructor gets to run to completion before the
timer has a chance to fire.
Task-number: QTBUG-48700
Change-Id: Iab73d02933635821b8d1ca1ff3d53e92eca85834
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Calculation was working as long as one didn't use per pixel scrolling.
Task-number: QTBUG-48579
Change-Id: Ie02e28b008c5c81ed45d7dd17fed96148c23b598
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QMetaProperty] write() now resets the property if an
empty QVariant is given, or set a default constructed object if the
property is not resettable
Change-Id: I9f9b57114e740f03ec4db6f223c1e8280a3d5209
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
if t >= QMetaType::User, we would not return false nor call convert.
We would then pass a pointer to whatever is in the QVariant to the
qt_metacall that is expecting a pointer to an object of a different type.
Since we have custom converters, we can call QVarent::convert even for
custom types anyway.
[ChangeLog][QtCore] Fixed crash when setting a QVariant of a different
type to a property of a custom type. Attempt to do a conversion instead.
Task-number: QTBUG-40644
Change-Id: Ib6fbd7e7ddcf25c5ee247ea04177e079f6d7de35
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Also re-enable and update the tst_showWithoutActivating test.
Change-Id: Ic7fa9b1bf7637e4661c593aaeabb3220cd4204ff
Task-number: QTBUG-46098
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVersionNumber is now public API.
Change-Id: I5b21b6ce5f1651158b6f29bc6f06e5d4e133bed8
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
OldPersistentIndexes store selected items during sort operation. They
were wrongly taken from static list of indexes. This change takes them
from parent (QTableWidget) who maintains the list of selected segments.
Task-number: QTBUG-48408
Change-Id: Ie1bc4071a275dd76d113d883ab30ccd4cb1fa625
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The error return has been observed to vary.
Task-number: QTBUG-48566
Change-Id: Iecfe7819898a6a8a482c1b2251543193ecfa4841
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Mark include directives in qevent.h for removal and preemptively
add missing headers in code base.
Change-Id: I81011d7bfad4a09d80deeda6d1bed67b5c0e63c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Source files should not be executable.
Change-Id: If9b9eaa6c8c7348ca6f48fa9253f3540e95aca37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Introduce consistent error messages for failing QFile::open()
and existence checks to make errors about non-available
UNC paths on Windows clearer.
- Introduce a guard class to ensure the stdin reader processes
are terminated properly in case of failures, which currently
occur for MSVC2015.
- Fix brace coding style and remove unnecessary QString
conversions.
Task-number: QTBUG-48504
Change-Id: I890b13088558ef05391fb152a6b815276df0fe8c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce error messages showing the path in file existence,
file type and directory entry list tests to make fails related
to missing UNC shares clearer.
Task-number: QTBUG-48504
Change-Id: I5fb401b94cfa8b58562a906b8d9765039e334027
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
If QT_NO_LIBRARY isn't set we cannot test QCoreApplication's library
path functions and none of the plugin and library related tests are
applicable. Also, examples that rely on dynamic plugin loading for
their core functionality obviously don't work.
Change-Id: I2d381ee1bc8d944e1181557895a7e92a364fd778
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's accessed by QFutureWatcherBase::isFinished(), potentially before
anything has set it. It gets to be initially true until setFuture()
has given it us unfinished future and set it false.
Add a regression test for matching state in future and watcher.
Task-number: QTBUG-12358
Change-Id: Iae7bdaa434ab80f518afe4d7d55df99c391991a4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- tst_QProcess::fileWriterProcess()
- tst_QProcess::readLineStdin()
- [tst_QProcess::readLineStdin_lineByLine()
The test fails apparently due to a bug in its runtime library
(fread() dropping data).
Task-number: QTBUG-48455
Task-number: QTBUG-48504
Change-Id: I972e560e88312cea0d3dbcea9450c59285a15d5a
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Verify exit status and code where applicable. Avoid unnecessary
data conversions in fileWriterProcess. Improve error handling in
helper processes.
Task-number: QTBUG-47370
Task-number: QTBUG-48455
Change-Id: Ib5c4f546027131db02caaa05154a5880edac5cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code still produces Internal Compiler Errors in release mode.
Task-number: QTBUG-46344
Change-Id: I86d3608b13a197a0b65b83829d1512203e1578f8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QMdiSubWindow should not reset parent of base widget
if it has been already changed before.
Task-number: QTBUG-47993
Change-Id: I43e3a28481e9ba3026a93850a8cc1246a359852a
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QByteArray::operator< and friends had their logic reversed.
Task-number: QTBUG-48350
Change-Id: I625209cc922b47e78dfb8de9fe100411f285a628
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test caused problems because it relies on the at-spi services to
run. In addition it could trigger orca (screen reader) to be launched
as a side-effect of the dbus call to the screen-reader-enabled setting.
Instead just export QT_LINUX_ACCESSIBILITY_ALWAYS_ON to make sure that
accessibility will work. This means we won't test the dbus startup any
more, but the test will be reliable.
There is still a dbus call to org.a11y.Bus to launch the service in case
it's not running yet.
Task-number: QTBUG-27732
Task-number: QTBUG-44434
Change-Id: Idb86ed98ca4b47cb209027c8b41529e7e5285197
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Instantiate the QProcess object on the stack to ensure resource
cleanup and remove the QProcess * member variable.
Use qobject_cast<QProcess *>(QObject::sender()) instead
of the member variable in the helpers slots to ensure that signals
from a leaked QProcess do not interfere with other tests.
Task-number: QTBUG-47370
Change-Id: Ifc0dccb7e4b18069d236df53bccdcb6a47df6346
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Need to survive having screens detached/reattached on X11.
Task-number: QTBUG-42985
Change-Id: I81cf9721f0cb61a29180c60d44d588063266e651
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
QDateTime values with a UTC offset are not correctly serialized with
QDataStream::Qt_4_0. So use a newer QDataStream format for this type and
mark it with "@DateTime" instead of "@Variant".
Task-number: QTBUG-46551
Change-Id: I211c89e8cd0211c949ec993e6ffd5192d0eebbb3
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Left and right were swapped which caused invalid selection ranges to be
emitted through selectionChanged.
Task-number: QTBUG-48402
Change-Id: I18692c2b50c49ab39065f9b360b37b7615227ee9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The explanation is in the code comment. Ever since QDBusConnections
began being processed in a separate thread, we were relying on the fact
that the main thread didn't begin processing its event queue until the
second event got posted (the event loop only exits after it has finished
processing all pending events). We had a race between the main thread
starting its processing, at which point it decides which is the last
event it will process, and the QDBusConnectionManager thread posting the
second event.
This is very fragile code, since it depends on the behavior of
QDBusConnectionPrivate (how it stores the signal relays in a hash) and
that of QHash with duplicate keys. This only works because the hash
key between the two connections is the same (it's only dependent on the
method name and interface name). If we ever begin using something that
isn't the same between "control" and "p", then with QHash's randomness,
we'll be racy again.
Change-Id: I42e7ef1a481840699a8dffff1406c3a4674ec3a6
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The test assumed that an event loop can be tested for emptiness
multiple times, which is wrong because an event can be delivered any
time.
Change-Id: Ic44245321eeed2091b640ada2c83d205b83a1cc2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test when running on Windows has a race condition since in qthread_win.cpp the
finished signal is emitted before everything is cleaned up.
Change-Id: I3c03d9a245e297e8f79b2be2c34398bf7bac9bae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Most processors have carry flags which they set on addition overflow, so
it's a good idea to access them whenever possible. Most of them also
have widening multiply instructions that can be used to detect overflow
of the non-widening version.
Tested to compile on:
Architecture Compiler
x86 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 ILP32 GCC 4.9, GCC 5*, Clang 3.6*
IA-64 LP64 GCC 4.8
ARMv7-A GCC 4.9, Clang 3.6*
AArch64 Clang 3.6*
MIPS GCC 4.9, Clang 3.6*
MIPS64 GCC 4.9, Clang 3.6*
PowerPC GCC 4.9, Clang 3.6*
PowerPC 64 GCC 4.9, Clang 3.6*
SPARC Clang 3.6*
SPARCv9 Clang 3.6*
[*] supports the intrinsics
If the compiler does not offer a way to detect an overflow, we do it by
hand. For unsigned additions, that's easy, since the C++ language
specifies the behavior of the overflow. That's also the reason why this
code is implemented only for unsigned integers.
For the multiplication, if the compiler does not support widening
multiplications, we do it with a division instead. This is necessary for
GCC < 4.5 and compilers not compatible with GCC or MSVC.
Change-Id: I049a653beeb5454c9539ffff13e637de0f1338c1
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The timeZone() function used to assert when called on such an object
(or, for a release build, return an invalid time zone).
Change-Id: I6ae8316b2ad76f1f868e2498f7ce8aa3fcabf4a6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without piping the output to /dev/null, we'd get the following:
sh: dbus-send: command not found
And if dbus support is only limited to runtime support, we don't
treat it as a fatal error and only notice the user.
Change-Id: Ia7750a074b8d563bf9694fa8fa628b4017e8bb68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When working with QGraphicsView/QGraphicsScene, touch events are sent to
QGraphicsView's viewport() event handler, which then dispatches it to the
corresponding QGraphicsItem, if any. In the case of QGraphicsProxyWidget, we
need to forward these touch events to the encapsulated QWidget, otherwise it
will never receive them (i.e. the event chain for touch events terminates at
QGraphicsProxyWidget).
This also enables QWidgets associated with QGraphicsProxyWidget to grab
gestures.
Task-id: QTBUG-45737
Change-Id: Ia441d3576afb6c97376be6f2ff073901e6e928a5
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The derived classes (QSpinBox, QDoubleSpinBox, QDateTimeEdit, QTimeEdit)
set various input method hints on the spin box in the init() methods
of their private classes which did not have any effect since
QAbstractSpinBox::inputMethodQuery() was implemented to return the
hints of the embedded QLineEdit only. Change it so that hints set
on the QAbstractSpinBox are also considered.
Change-Id: I76b7c4d3e0869589c110cf3a0b2c3f94201db5d5
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
In some cases it's not possible to use QT_HASH_SEED, specially when
we need to set the environment variable from inside the application,
as dynamically loaded libraries or plugins may create static QHash
instances. That would set qt_qhash_seed to a value different from
-1 and skip the env var value.
For those cases, and when we still want to set qt_qhash_seed, we
provide a way to enforce its value.
Auto-tests accessing qt_qhash_seed directly have been updated
accordingly. Usage in qdoc, uic and rcc has been left as is
for the time being.
Change-Id: I3b35b4fa0223c83b1348a6508641905a2a63266f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test is moved from tst_qtreeview to tst_qtreewidget as it tests
qtreewidget class.
C++ usage is fixed, there was an illegal C cast that was causing crashes
Change-Id: I80e90a9b531e87f9b133186b6f48be42f54901b5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Prefix the error string message with either "chdir" or the "execvXX"-
family function that failed. In order to simplify the process, I also
made it transmit local 8-bit data instead of UTF-16 (this also avoids
memory allocation with QString).
Since there are now two write(2) calls, it's possible for the parent
process to be woken up and read(2) only the first. The parent process
now needs to wait for EOF.
Change-Id: Ib306f8f647014b399b87ffff13f1956199a5aee0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We need a method to check whether a specified pixmap is still
cached without touching the recently-accessed list for this pixmap.
[ChangeLog][QtGui][QPixmapCache] Added QPixmapCache::Key::isValid().
Change-Id: I90fa4f67b569099b67b6207e78494beb3111b68e
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
According to MSDN, the zero value of ICONDIRENTRY bHeight and bWidth
fields mean a maximum icon size 256 pixels. So QtIcoHandler::option()
should return 256 instead of 0 pixels for such icons. Also there is
fixed wrong seek offset at the second call on this method.
http://blogs.msdn.com/b/oldnewthing/archive/2010/10/18/10077133.aspx
Task-number: QTBUG-48103
Change-Id: I99f0c9720fd58889045b0c73c51498f2065b0b91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
Important flags are not passed from mkspecs to cmake like SYSROOT,
CFLAGS and CXXFLAGS.
Change-Id: Ie318d19c1aebacdb845638e5f80c2ecb8e6ac8bb
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
By serializing the capitalization value of QFont, it ensures that it is
correctly preserved when QPicture streams it and later plays it back.
Subsequently the QDataStream version has been bumped up to account for the
change of the data format for serializing QFont.
[ChangeLog][QtGui][QFont] QFont now serializes the capitalization setting.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to
17 to account for changes in the serialization of QFont.
Task-number: QTBUG-15214
Change-Id: I042680760e5a69d18d41e786b7500a3eebbe562f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
It sends a shortcut override event directly, which should go
though QPA anyways.
Change-Id: Ie2c6f45cd44222cd9be8846099573dcd2968a77c
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
P2P connections don't have senders and receivers, so asking
QDBusConnection to connect to a signal with a sender was a mistake
(added in 5368e44a86). Due to an internal
bug, this never presented itself -- double fault.
Fix the connection so that we don't get unit test failures when the bug
is solved.
Change-Id: I9a75ad8521ae4e5cbbe5ffff13d1a78b7dea6d07
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
With kdbus, we won't have a regular signal, but instead a special
message. So keep the logic of what to do in QDBusConnectionPrivate.
The #ifdef is to make sure the bootstrapped qdbuscpp2xml continues to
build in cross-compilation environments.
Change-Id: Iee8cbc07c4434ce9b560ffff13d06f0d9904cb6d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Now we know that all timers and socket notifiers get created only in the
QDBusConnectionManager thread.
Incidentally, this reduced code duplication.
Change-Id: I27eaacb532114dd188c4ffff13d5075a8d2efb0b
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Each application will have one thread dedicated for this, for all
QDBusConnections. I wouldn't mind sharing such a thread with other uses
in Qt, provided none of them ever block (the QProcessManager thread
comes to mind, but it's going away soon).
The cost associated with this change in this commit is so far rather
minimal. All incoming D-Bus calls need to be handled after an event is
posted anyway, to avoid deadlocking on reentering libdbus-1 functions
that acquire locks still held. The cost is the one more thread running
and the cost of synchronizing them when an event is posted.
The benefits far outweigh that cost: no longer will we have problems of
QtDBus failing to run if the main system or session connections are used
before QCoreApplication is run. Moreover, events can be received and
handled in aux threads even if the main thread is blocked on some
operation.
Note: this commit may not be testable (tst_qdbusconnection may fail)
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b737556ccd11a8
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This simplifies the code a little by having a single code path. More
importantly, we no longer need to call the evil function
dbus_connection_send_with_reply_and_block. That function acquires a lock
on the socket transport inside libdbus-1, which means all threads need
to wait until the one call gets unblocked before they can continue.
To do that, this commit reimplements the QDBus::Block part of
QDBusConnectionPrivate::sendWithReply by reusing the existing call to
sendWithReplyAsync() and then doing a blocking-wait with
QDBusPendingCallPrivate::waitForFinished().
By using (Q)DBusPendingCall and the threaded connection approach (next
commit), now we never block on the socket. That also means the code to
call dbus_pending_call_block() is no longer necessary and the
waitForFinished() function itself can be considerably simplified.
As a side-effect of no longer blocking, a number of pre-existing race
conditions that used to be hidden showed up.
Note: this commit deadlocks without the threading (next commits).
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b73754954a3f7d
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Loading icons is quite slow because we need to stat many files in many directories.
That's why gtk adds a cache in the icon theme directory so it avoids stating lots
of files.
The cache file can be generated with gtk-update-icon-cache utility on a theme
directory. If the cache is not present, corrupted, or outdated, the normal slow lookup
is still run.
[ChangeLog][QtGui][QIcon] fromTheme gained the ability to use the GTK icon cache
to speed up lookups.
Change-Id: I3ab8a9910be67a34034556023be61a86789a7893
Reviewed-by: David Faure <david.faure@kdab.com>
To handle network events, QEventDispatcherWin32 uses I/O model
based on notifications through the window message queue. Having
successfully posted notification of a particular event to an
application window, no further messages for that network event
will be posted to the application window until the application
makes the function call that implicitly re-enables notification
of that network event. With these semantics, an application need
not read all available data in response to an FD_READ message:
a single recv in response to each FD_READ message is appropriate.
If an application issues multiple recv calls in response to a
single FD_READ, it can receive multiple FD_READ messages
(including spurious).
To solve this issue, this patch always disables the notifier
after getting a notification, and re-enables it only when the
message queue is empty.
Task-number: QTBUG-46552
Change-Id: I05df67032911cd1f5927fa7912f7864bfbf8711e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
By default when using Qt Style Sheets, a widget does not inherit its
font and palette from its parent widget. With the
Qt::AA_UseStyleSheetPropagationInWidgetStyles application attribute set,
propagation when using Qt Style Sheets behaves like it does with regular
QWidget::setPalette() and QWidget::setFont() calls.
[ChangeLog][QtWidgets] Added the
Qt::AA_UseStyleSheetPropagationInWidgetStyles attribute which enables
font and palette propagation for Qt Style Sheets.
Task-number: QTBUG-37580
Change-Id: I3038c13d61e32625a1a05291c5394eaefd376a68
Reviewed-by: Samuel Nevala <samuel.nevala@intopalo.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Disable input and cursor for QGuiApplication instances used in
autotest to initialize it properly.
Change-Id: I78dc9b776269c082c20f244a51f858289129275d
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
A buffered TCP socket might be open only for writing purpose. As a
possible use case of the API, this patch avoids accumulation of
unwanted data in the internal read buffer.
Change-Id: I2759c1e04968d24e2ae71f3eca05e7e560cd8a41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cocoa is basically just AppKit + CoreData. Since we do not use CoreData
in Qt, there is no reason to link to it or (transitively) import its
headers.
This is just a mechanical replacement of -framework Cocoa with
-framework AppKit and <Cocoa/Cocoa.h> with <AppKit/AppKit.h>
Change-Id: Ibcfc8a03c0ddff27a67fbc87dd7bd58a4b648956
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
An invalid mime magic definition could lead to an assert. Replaced with
a qWarning. Move all checking to the QMimeMagicRule constructor, and do
keep invalid rules since they are need to parse child rules.
Unit test added, with QTest::ignoreMessage when using the XML backend
(there's no warning from update-mime-database when using the cache).
Also make it easier to add more shared mime info files for tests.
Task-number: QTBUG-44319
Done-with: Eike Ziller <eike.ziller@theqtcompany.com>
Change-Id: Ie39a160a106b650cdcee88778fa7eff9e932a988
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Every other subclass of QWidget calls event->ignore() on unhandled
events, and QGroupBox's failure to follow this convention prevented it
from being used in some specialized applications. Instances of QGroupBox
now only absorb mouse press events to their checkboxes (if they have
checkboxes) and ignore all other mouse events.
Task-number: QTBUG-15519
Change-Id: I6b0c89c92868feddbe3888088703b32cb95d9903
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Qt Creator needs to be able to determine structure sizes and data
member offsets for certain private types even in the absence of debug
information.
It is sufficient to keep and test the actual data sets on the Qt Creator
side, as long library provides a hint which data set is needed.
So far, HookDataVersion was meant to be used for that purpose. To
make it more explicit, this patch introduce a TypeInformationVersion
field in qtHookData.
Change-Id: Ia1c3c6f62f314d63c4df289ef456f047c5e84cf4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it easier to capture information about crashing tests in log files,
since it is not possible to do something like
foo > log.txt 2> errlog.txt
on Windows.
Adapt selftest.
[ChangeLog][QtTest][Important Behavior Changes] Crash/exception
information is now logged to standard output on Windows.
Task-number: QTBUG-47370
Change-Id: I3e6a2d25855ed0f20516418a031990b562f5f757
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The logic used in the FreeType font engine can be generalized
and move to the QFontEngine baseclass. This allows the CoreText
font engine to correctly report the minimum left/right bearings,
which decreases the chance that an optimization in QTextLayout's
line breaking algorithm will produce wrong results.
The calculation of left and right bearing has been moved to the
glyph_metrics_t type to reduce code duplication. This allows us
to use the with and height of the bounding box to determine if
the glyph has any contours.
Change-Id: I864697d3f31ed56f22f04666199b6c5023c5e585
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
At the edge of the view, a line segment could end up as not producing
any pixels even if not clipped by the floating-point clip
routine. Make sure the starting point for the next line is still
updated correctly for any significant segment lengths.
Change-Id: I381a4efb81ce6006f3da4c67abf279aea79e4663
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
If Qt is not running its own event loop (e.g. if Qt is a plugin running
in a non-Qt host application with its own event loop, a call to
sendPostedEvents() should process all events by default, and not depend
on the flags passed to the last call to processEvents()
We also modify sendPostedEvents() to call its base implementation instead
of directly calling QCoreApplication::sendPostedEvents(). (The behavior of
the base implementation is the same, so no behavior change there).
This also adds a test for QWindow event handling without Qts event loop is
running. This is a black box test, just to ensure that basic functionality
is working. It can be extended later.
Task-number: QTBUG-45956
Change-Id: I7d688c0c6dec5f133fb495f07526debdde5389af
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
RCS files (text/plain) have the glob pattern "*,v", which caused
the regular expression match to fail.
Task-number: QTBUG-47923
Change-Id: I7d8682ef51306cb4da58a2b3880842bd99892ea3
Reviewed-by: David Faure <david.faure@kdab.com>
This property might be set by applications whose desktop entry file name
cannot be determined by heuristics already in place.
It is particularly useful for QtWayland as it can be used to determine
the app_id simply by stripping the ".desktop" suffix from this property.
Without a correct app_id, Wayland compositors won't be able to e.g.
show the application icon on task managers.
This property is also very interesting for X11 as there are various
desktop environments trying to map windows to launchers.
It will be possible to export desktopFileName as a xproperty, making
such mapping less error prone.
Change-Id: I0fef23f28f383639e625379ab46e36aecb338ac4
Reviewed-by: Martin Gräßlin <mgraesslin@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Use-case is fast insertion of copies of a character,
avoiding any temporary heap allocations
Change-Id: Ie5517d88429fbd4c58dbe5729de7c468d5d9a279
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Newer test functions don't have those. Removing those comments makes
the code consistent.
Change-Id: I542b89e797ef061395ce1fc87d848195e6f81f35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This will allow us to drop gtk2 support from qtbase in future,
while still providing the gtk2 style for those who want to use it.
Also with moving to qtstyleplugins, the code can be simplified
because we can directly link to libraries we need, instead of using
QLibrary.
[ChangeLog][QtWidgets] Remove QGtkStyle, it is now provided in
qtstyleplugins repository.
Change-Id: I6221b1a513d7fda32e080f3ca159b0b2f8a8f246
Reviewed-by: Timo Jyrinki <timo.jyrinki@canonical.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jens Bache-Wiig <jensbw@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Input context selection works differently across platforms. On some
platforms it is not possible to request a specific context at all
(e.g. Wayland). This will be unified, depending on the environment
variable "QT_IM_MODULE", you will get:
- null: default (platform) context, if defined (otherwise no context)
- empty: no context
- set: set one, if it exists and is valid (otherwise no context)
[ChangeLog][Platform Specific Changes] Haromnized input context selection.
QT_IM_MODULE environment variable will be taken into account.
Change-Id: Ic8f826fbc6ace25941cd19b9b086943e848fbe01
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Nedim Hadzic <nedim.hadzic@pelagicore.com>
This commit changes the readDatagram() and writeDatagram() virtual
functions to take a QIpPacketHeader as meta data, instead of a
QHostAddress/quint16 pair. As previously, the header is an "out"
parameter for readDatagram() and an "in" parameter for writeDatagram().
The header pointer in readDatagram() is allowed to be null if the
PacketHeaderOptions indicates WantNone. Otherwise, it must not be null.
The extra options parameter is introduced because we may not always want
all the metadata upon reception. For sending, we know what to include or
not based on what's set in the incoming header parameter.
QIpPacketHeader splits sender and destination because we'll be able to
return both on datagram reception.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4213255008c7
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix usage of API that is marked deprecated.
Change-Id: Ib9a45e93084fb5b0d0d3aefd64b755dff7c696d6
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
This test fails on OS X: we first fill sockets' kernel buffers and then
we tryto write a 'residue', waiting in 'select' for 2 seconds.
It looks like on OS X (at least, 10.10) 2 seconds are not enough - we always have a timeout.
Wait ... 4 seconds.
Change-Id: Id679dccda10b8f7859b8dfa6456b91ec13d52f68
Reviewed-by: Richard J. Moore <rich@kde.org>
QDateTime::addSecs needs to do something similar, but not identical
because it needs the number of days too. And then there are daylight
savings transitions...
Task-number: QTBUG-47717
Change-Id: I7de033f80b0e4431b7f1ffff13f976f4f5e5a059
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I363776ef664c97bca0071d57cf78a8fe935bce8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Tests from corelib/tools were omitted in this change.
Change-Id: I4c8786d33fcf429d11b2b624c7cd89c28cadb518
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The function declaration has to be in the same ifdefs as the
implementation.
Change-Id: I78c5795baef4adba7439f66252819963db164759
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Mostly related to IPv6, because Q_IPV6ADDR is an array of char, so the
compilers were generating byte access to each value. Instead, force
access as 32- and 64-bit in most places that make sense (64-bit access
decays to 32-bit on 32-bit machines). In one isLoopback(), this is now a
128-bit access for best improvement.
Some smaller improvements relating to SpecialAddress by combining the
three IPv4 special addresses.
Change-Id: I7de033f80b0e4431b7f1ffff13f932b1cd7b5d21
Reviewed-by: Richard J. Moore <rich@kde.org>
We keep two symbols from QPluginLoader defined, even if QT_NO_LIBRARY
is set in order to be able to locate static plugins. This doesn't
constitute any loading of shared libraries or plugins from external
files at runtime.
Using these symbols we can enable most of QFactoryLoader even if
QT_NO_LIBRARY is set. Only update(), refreshAll(), library() and
the dtor make no sense then. This way QGenericPlugin also becomes
useful with QT_NO_LIBRARY.
Task-number: QTBUG-3045
Change-Id: Ib7842ce5799e8e2caa46431d95fddd1adda0fc41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Playing with the offset argument of pcre_exec is not equivalent to
adjusting the pointer to the subject string. In particular, PCRE
can go behind the offset to check for lookbehinds or "transition"
metacharacters (\b, \B, etc.).
This made the code that deals with QStringRefs not matching in behavior
with the corresponding code dealing with QStrings. For instance,
QString subject("Miss");
QRegularExpression re("(?<=M)iss");
re.match(subject.mid(1)); // doesn't match
re.match(subject.midRef(1)); // matches!!!
Instead, actually adjust the pointer to the subject string so that
the behavior is identical. A broken test that relied on the
equivalence is also removed.
Change-Id: If96333241ef59621d7f5a6a170ebd0a186844874
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensure QAction::setVisible() is
handled and reposition if visibility changes.
Task-number: QTBUG-39660
Change-Id: I14f0659aedc8dc89ddef3159d3a500b40b1563ff
Reviewed-by: David Faure <david.faure@kdab.com>
We don't replay mouse events after closing popups on X11.
This leads to the bug when the menu doesn't show after
clicking three times on the menu bar. It can be fixed by
reverting 78d7192338, but
then we need an alternative fix for QTBUG-32807 on Windows.
So don't replay mouse events for the menu bar on all
platforms.
Change-Id: I3db8e24a6de6f35b0a17dffac6a131f1cad42e6d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Give setStandardOutputFile2 a sensible name, move it to where it
belongs and remove bogus Q_OS_WINCE ifdef.
Change-Id: I5c843e8b6cb626979966f3e61f7a7c720173bb28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Do not call bytesAvailableInChannel if the source pipe end is
invalid. This is the case when redirecting channels on Windows.
The assertions in bytesAvailableInChannel were triggered whenever
an output process or output file was set and waitForBytesWritten
was called.
Task-number: QTBUG-45548
Change-Id: I225dfea2c5e27e122f75008a3a06d425554e00fe
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Drop process output to nullDevice(), if an application does not request
forwarding, redirecting or reading from the device channel. This
prevents from accumulation of unnecessary data which can not be read.
Change-Id: Ia311a8c658a46cf580ffa9484c5369f3fc5f98a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The generated xml file is now lowercase.
This was changed in shared-mime-info 3805d0bcf2.
It led to runtime warnings "No file found for ...", which helped notice the bug.
Change-Id: I31f0fc7f0fe8a098c3f79c0bcbeeb1909d2cc05a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The buffer may have been left dirty if we were unable to write all the
data to the child process in the previous run. So ensure we clear it
before starting a new one. We already did that for stdout and stderr,
for some reason.
Task-number: QTBUG-44517
Change-Id: I1a800c709d3543699131ffff13c419da3bbffacf
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This complements QHostAddress::isLoopback. The only missing check now is
for the "Any" address types, though operator== is quite fast nowadays.
Change-Id: Iee8cbc07c4434ce9b560ffff13cc2691e15014b6
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead, we use the binary MySQL encoding and copy the data directly
into the QVariant of the desired type. This gets rid of the temporary
string allocations and greatly improves the performance of the added
benchmark. On my machine, the results are:
Before:
0.562 msecs per iteration (total: 563, iterations: 1000)
1,922,479.330 instructions per iteration (total: 1,922,479,330, iterations: 1000)
After:
0.381 msecs per iteration (total: 381, iterations: 1000)
774,132.957 instructions per iteration (total: 774,132,958, iterations: 1000)
Note that the same could be applied to floating point data types in
the future. Additionally, special support for MYSQL_TIME structure
coult be added to get rid of the string conversions there.
To ensure everything keeps working, a new auto test is added as well
that verifies the select statements and insertions of integral data
into a MySql table works as intended.
[ChangeLog][QtSql] Improve performance when reading integer values
from MySQL databases via prepared statements.
Change-Id: I21dd9277661971ded934546f09535014b63f8eb8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This commit moves the functionality from QtNetwork's QHostInfo to
QtCore. Note that due to Windows ws2_32.dll's quirky behavior of
requiring WSAStartup before calling gethostname, this change required
moving the initialization to QtCore too.
On Linux systems, gethostname() gets the name from uname(), so we bypass
the middle man and save one memcpy.
Change-Id: I27eaacb532114dd188c4ffff13d32655a6301346
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It failed on Windows due to readonly files copied from the resource,
until adding a setPermission call.
Change-Id: I1d42b53763583aca73d011e0f2bbf061ef6aa891
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
In C++, type punning with a union is not allowed. It will result in
compiler defined behavior at best, and undefined behavior at worst.
Specifically, if QRgba64 is passed to a function by value, the different
members of a struct might be passed in separate registers. This means
that any write to the quint64 might not blank out the values of the
struct whenever the compiler looses track with TBAA.
Change-Id: I991b5492fe4bb13a14bb670fef5bf13dacbe6c0a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Just like from RGB32 to RGB30 we must also repremultiply when converting
from RGB64 because the alpha channel loses more precision than the other
color channels.
Since this is not approximated accurately in the simple blending
functions and the functions are no longer needed now the main render
engine supports higher accuracy, the simple blending routines for RGB30
have been removed.
Change-Id: I2b7b8eb015e330a487848fc4370ad3a1e966be91
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Have an autotest to prevent introducing JSON syntax errors
that become apparent only at runtime.
Change-Id: If2bcbf4d227fddcbeb9c095b7986bada078131d7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On Windows and OS X, where QStandardPaths does not use XDG_DATA_DIRS/
_HOME and shared-mime-info is not installed, the tests that require
additional shared mime info xml files were never run.
Mend that by using QStandardPaths' test mode instead of setting
XDG_DATA_HOME.
Change-Id: I53b75c293c41c4dac63986dcb88972c2b54d5428
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The test is very flakey in 5.5 integrations and the OS X CI machines have
notorious problems with networking stability. So the previously listed tests
are not really at fault, it's an infrastructure problem, that we choose to
ignore for the time being.
Change-Id: I7fbfa7b3778daa6b5e60d95b822847c92927122f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
SecureTransport does not implement QSslCertificatePrivate thus some
tests relying on generic version fail. Skip them for now.
Change-Id: I483340b37786a8a556e954b2c538e4f48a342be9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The former didn't account for ascent and descent.
Change-Id: If741f22f7e79ac3c13e58f2966358010d9f9ec81
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
[ChangeLog][Important Behavior Changes] QDebug output for QStrings
changed compared to Qt 5.5.0 to more closely match the output of
previous Qt versions. Like Qt 5.5.0, QDebug will escape non-printable
characters, the backslash and quote characters, but will no longer
escape the printable characters.
Task-number: QTBUG-47316
Change-Id: I52dd43c12685407bb9a6ffff13f62ef68cbc80c5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, on some systems (Windows), we'll always create the same dirs.
Change-Id: Id3d5c7bf4d4c45069621ffff13f79ba91e0f974b
Reviewed-by: Christopher Adams <chris.adams@jollamobile.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtCore][QLoggingCategory] Fixed behavior of default
severity passed to constructor or Q_LOGGING_CATEGORY with regards to
QtInfoMsg, which was previously treated as being more severe than
QtFatalMsg.
This is because the code was using the numeric value of QtMsgType as a
proxy for severity (via the <= operator), but the value of QtInfoMsg is
greater than QtFatalMsg. Instead, the severity ordering must be dealt
with explicitly.
Change-Id: I5f178afc735221b00cb67c2cea4fa964bd9079ce
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Build it only in -developer-build mode for tests that might depend
on exact-matching font behavior.
Return earlier to avoid doing any useless job.
Change-Id: I966ee5689f03403e45f4c957b63e3113f0467803
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
Add several new tests to verify that Qt behaves properly when
high-DPI scaling is enabled. Add a generic framework for
manual tests for good measure. This could be refactored and
used for other manual tests later.
Includes tests written by Morten and Friedemann.
Task-number: QTBUG-46615
Change-Id: Ib6762ec1454711e71f0c094b19015932b99e8d6d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
All overloads of QProcess::start will now check whether the program
string is empty and in that case
- set error to FailedToStart,
- set errorString to "No program defined",
- emit error.
Until now only one of the three overloads behaved like this.
As a side effect, start(QString(), QStringList()) will not crash on
Windows anymore.
Task-number: QTBUG-47404
Change-Id: I2f93657204fe3643b1d74a74817843c05fc4a96b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I4e4a319c5918d697a33f6d6032c36b8c9660ca05
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Introduce overloads in the API to allow specifying multiple color
attachment sizes and formats. When these are in use and MRT is supported,
a texture or renderbuffer is created for each of GL_COLOR_ATTACHMENT0, 1, 2, ...
[ChangeLog] Added support for multiple render targets in QOpenGLFramebufferObject
Task-number: QTBUG-39235
Change-Id: Ie7cfd81d1b796a9166b80dff7513aafe0120d53d
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(hash.keys())
[ChangeLog][QtCore][QHash] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: I1f9db8a7a4294e1556cbb50b8fe5ebdcf0dc29a2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(map.keys())
[ChangeLog][QtCore][QMap] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: Ieee2f9ad031e9d1e845a71447746699bbe95b96c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Rename the test slot eventFilter() to testEventFilter(), which fixes:
tst_qgraphicsproxywidget.cpp:101:10: warning: 'tst_QGraphicsProxyWidget::eventFilter' hides overloaded virtual function [-Woverloaded-virtual]
void eventFilter();.
Change-Id: Ia05d188b18dcbf3a0b093dcea19a7122bcde6e62
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qgraphicsanchorlayout.cpp:144:5: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
layoutGeometry.adjusted(+right, +top, -left, -bottom);
Change-Id: I411ccaa867e418f36869fc244ea2eeaa5b117312
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
in tests/auto/other, tests/auto/printsupport and tests/auto/xml.
Change-Id: I28cbdc89d36791f179425f17f90b697c60660938
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I7add5b7afeba83895acdcbed110e8275dc76864a
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The history state had the limitation that it was hard (or impossible) to
use when more than one default state had to be entered. For example,
using it in a parallel state was impossible without ending up in an
infinite loop.
This patch changes the QHistoryState to only have an initial transition,
and the state selection algorithm is changed accordingly. It also brings
QStateMachine closer to the SCXML standard.
The existing defaultState is implemented on top of the
defaultTransition: when used, a new transition, with the default state as
its target, is set as the defaultTransition.
Task-number: QTBUG-46703
Change-Id: Ifbb44e4f0f26b72e365af4c94753e4483f9850e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
A parallel state cannot have an initial state, as all children of the
parallel state will be entered. Setting such an initial state on a
QState marked as ParallelStates would already produce a warning and
ignore the initial state. Now any initial state that has been set before
changing the child-mode to ParallelStates will also produce a warning
and remove the previously set initial state.
Change-Id: Ie5fcd44b03516744f785f2d1880bf806918c44d4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Set QFileDevice::WriteUser on all files extracted from resources. These
are read-only, which is preserved by QFile::copy(). This caused the
deletion of the temporary directory to fail on Windows.
Change-Id: Id99de9160471c38bcec68025c89cfabbe209bdbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Fixed a bug that caused QProcess to launch
a child process on Unix even if the directory specified with
setWorkingDirectory did not exist.
Task-number: QTBUG-47271
Change-Id: Ib306f8f647014b399b87ffff13f195158b0e52f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We force a recreation of the library paths with added information on
construction of QCoreApplication. This way we can find plugins in
the application directory which only becomes known when
QCoreApplication is created. When the user changes the library path
we create a new list of the manually modified library paths and
recalculate it from the delta of original vs. modified paths when
QCoreApplication is created.
The upsides of this approach vs. keeping an explicit delta are:
* We don't need to introduce a separate data structure to hold
the added/removed status for delta items or the information that
the whole list got replaced.
* The lists never get larger than the the real library paths. An
explicit delta would have to record all modifications.
* I don't think the delta replay algorithm we would have to do
anyway could be made much more compact than the one this change
introduces.
Of course, if the user actually changes anything, the list is
duplicated. Considering that this is a rarely used function and
that we would have to save some extra information anyway, I think
we can live with this.
Task-number: QTBUG-38598
Change-Id: I3bfbbd1be62dd5804dcc7ac808b053428a4e3149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This is low-hanging fruit, for two reasons:
1. The implementation is dead-simple (unlike, say, in QList).
2. It's completely transparent to the QVector user (unlike,
say, emplace_back, which can only be used inside an ifdef).
Change-Id: Iaf750100cf61ced77aa452f0e4e3c4ec36b29639
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
FileInfo is larger than a void*, so holding them in a QList is needlessly
inefficient. Worse, the code could come to depend on the fragile property
of (inefficient) QLists that references to elements therein never are
invalidated.
Change-Id: I772177c5ac544a5fecce2368f628148308ef260f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The overload was added for NokiaX86 and RVCT and is bound for
removal.
Task-number: QTBUG-47260
Change-Id: Ic67cee8769847956e16cd0470ebcd663a9e98a40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Long-lived threads started by Qt itself can now receive events even if
QCoreApplication hasn't been created. This is required in all threads we
start that will handle events, unless we're sure that the thread will
exit before the global application object begins destruction.
Otherwise, those threads will have race conditions dealing with the
event delivery system trying to call the QCoreApplication::notify()
virtual while the object is being destroyed.
Change-Id: I27eaacb532114dd188c4ffff13d4ad2a4bb443e6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Otherwise, if I open tests/auto/dbus/dbus.pro in Qt Creator, it shows me
"test", "test2", "test3", "test4" and it's very hard to know which test
is which.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0654696c025b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
From MSVC 2015 onwards, MSVC formats floats using printf("%g") like
g++, so the fiddling of the expected output needs to restricted
accordingly.
Change-Id: I6e7f78e5e90f70886a8b2ef37c0fb9bf82b5e1a3
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
When running the test, one gets the impression that it hangs.
Add some debug output including time to show what happens.
Change-Id: Iac6b4f0518ecec62169bf2269a0a8ec9192da570
Reviewed-by: David Faure <david.faure@kdab.com>
On Windows, having read-only files in a directory can cause removal
to fail. When file deletion fails, check on the permissions, set
write permissions and retry.
Split apart code paths by OS in tst_QDir::removeRecursivelyFailure();
deletion of the read-only directory on UNIX should still fail.
Change-Id: I36e54be5229a7b552e90fd5f42722b868fa0b6ee
Reviewed-by: David Faure <david.faure@kdab.com>
The test showed failures on OS X:
FAIL! : tst_QListView::batchedMode() Compared values are not the same
Actual (ba.size()): 2
Expected (3) : 3
Loc: [tst_qlistview.cpp(848)]
Use QTRY_COMPARE() to count the number of visible indexes with
a helper function instead of using hard-coded timeouts. Item 3
appears with a little delay on OS X.
Change-Id: I2fb2ff5ebdf9dbe85bdc79401375ad6f47b7b12b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test checks whether a child window receives
mouse events synthesizes from touch. Enlarge the child
window so that it fully covers the parent and move the
touch point a bit inside so that it is not affected
by window manager positioning issues.
Use QTRY_VERIFY.
FAIL! : tst_QApplication::touchEventPropagation() 'widget.seenMouseEvent' returned FALSE. ()
Loc: [/work/build/qt/qtbase/tests/auto/widgets/kernel/qapplication/tst_qapplication.cpp(2107)]
Change-Id: Ic08e68b1e547cc7148cd8994464fdc2a14ac507b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test sends touch events to the root item at the top left
corner which fails if the views starts to scroll.
Make the view sufficiently large to prevent scrolling and align
at top left.
FAIL! : tst_QTouchEvent::touchBeginWithGraphicsWidget() Compared values are not the same
Actual (((root->touchBeginCounter))): 0
Expected (1) : 1
Loc: [/work/build/qt/qtbase/tests/auto/gui/kernel/qtouchevent/tst_qtouchevent.cpp(1471)]
Change-Id: I357322ccc809ddb5cb587febf3c75cbe497e59d8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
An object that throws in its constructor cannot be reentered. This
violates both C++11 and C++98. It's also a regression from MSVC 2013.
The unit test is renamed to indicate what it really does, as opposed to
a misleading name that was probably a "thinko" on my part.
Task-number: QTBUG-47224
Change-Id: Ib306f8f647014b399b87ffff13f132436d0578ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QTemporaryFileEngine does not store the pattern, so it needs to get it
again from QTemporaryFilePrivate prior to reopening the file. It's
possible to lose the pattern when remove() is called on the object.
Task-number: QTBUG-46156
Change-Id: I66a35ce5f88941f29aa6ffff13dfc7f83d4fa3a2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Make the name of the signal and the name of the getter unambiguous,
which in turn allows the easy use of Qt 5-style connects.
[ChangeLog][QtCore] Deprecated QProcess::error() signal in favor
of new QProcess::errorOccurred() one.
Change-Id: Ic5bcf7d6878e6985f1b4fed9dbe247527d13758c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The test is crashing regularly (see bugreport).
Currently the test is not run in the regular CI system, that is why
the failures were not noticed.
Task-number: QTBUG-47128
Change-Id: I70d4ada0872316cc63d7629bb9ab2d055d70cf2a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
There was an attempt to allow static instances of QIcon in
7727a4355876607a1a022ff54e2570dae883f79c (Qt 4). This patch does only
solve some of the corner cases and broke with
aa5f70c00a. Since the "breakage" has been
there for two years, let's officially declare it unsupported instead of
trying to work around the issue.
Change-Id: I61e12fd03953763ee2e70eae58bcaecabdcb85b8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We have ownership for a reason - and there seems to be
no good reason not to accept it here.
[ChangeLog][QtWidgets][QComboBox] QComboBox::setView no longer
deletes the old view directly. It now checks the ownership first.
Change-Id: Icb5e5c0a6e9dc93c1d1c1a90ff57fbcc0786aa60
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
On Windows, t->timeout was updated only once, at creation time, so the
timer would always show as "overdue" after the first activation.
The timer is updated to indicate the full remaining time during the slot
activation, which is the behavior of the Unix and Glib dispatchers.
Task-number: QTBUG-46940
Change-Id: I255870833a024a36adf6ffff13ecadb021c4358c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sending several key presses with repeat=true should trigger the action
several times, unless autoRepeat is set to false.
Change-Id: I6469bbd78a608a87852554882c1632ce34422662
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Not all empty states were considered equal.
[ChangeLog][QtCore][QProcessEnvironment] Fixed a bug in
operator== involving different empty states.
Change-Id: I13c3200897847475bde2f963db0d2c587336b8a7
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wasn't checked, and with all the mutex locking going
on under the hood, we better rule out that there's a
deadlock.
Change-Id: I5a2ef1a524fb42b7840c9f3c18395cde05b7ef28
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QByteArray] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: Id5aefb52635f029305135afcd99db0b036a7af82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QString] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I1d48729c76e510c1e49c0e5dc41691aa662fdf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With two alpha-bits half opacity can not be represented, so we must use
one third (85) instead of half (127).
Change-Id: I2b3f1c983a3034196bf2604840945ad3a81f5b38
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
QLocales can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtCore][QLocale] Added qHash(QLocale).
Change-Id: Ia0fdf1207b842b9bb20b8f9ab0165016915debf4
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Keeping the reference may end up in a crash if a created
QIcon outlives the QFileIconProvider and we then try to
generate a pixmap.
The reference is not necessary since the options are queried
only when creating the icon, so they can be saved in the icon
provider.
Task-number: QTBUG-46755
Change-Id: I5c60887c2ed39030a2a20298ff10fd652189e4e7
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
When executing the test in a sequence (as done by make check after
tst_qstackedlayout), tst_QToolTip::task183679 often fails since
apparently the tooltip is hidden when the cursor is near it.
Move to the cursor to the right corner of the widget to fix this.
Change-Id: I3b13239e77cb387f1b1425fab79c8d6faa27b5bb
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change all functions instantiating a QFormLayout without widget on
the stack to use a toplevel widget and pointer variables since
otherwise, the labels automatically created by a call like
QFormLayout::addRow("bla", widget) leak.
Change-Id: I72a7a9c3175b5793a9450c6fcb970012ccd2274b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change-Id: Ia527c228f9173d1b5aeba94ba4e14e1beba60731
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Gather member variables testWidget, testLayout, w1..w3 and sp
used in getItemPosition() and itemAtPosition() in Helper
class ItemTestWidget.
Remove member variables m_grid, m_toplevel and instantiate the
top level widget on the stack in minMaxSize().
Remove empty slots and functions.
Add a cleanup() test checking that no visible top levels
are leaked with explanatory comment about data driven tests.
Change-Id: Ia30120d78144dab3b7c73864c6fbcef606cb19d3
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
f9408317e7 was unfortunately
approved though it had an annoying bug. The patch had
an assign of a visual index into a logical index.
This patch fixes that issue.
Change-Id: I9cc75e4e9701858c92e2c3e5817415041b42f8e8
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
os.version is the kernel version which is just not very useful or easy to
use for us. Instead, introduce a string that allows easy differentiation
between Windows 7 and 8.
From the adapter identifier the driver description is often helpful too,
especially in virtual machines.
These allow writing rules like:
{ "description": "Use WARP in some Win 8 and 8.1 VMs",
"os": { "type": "win", "release": [ "8", "8.1" ] },
"driver_description": "VMware SVGA 3D",
"features": [ "disable_desktopgl", "disable_d3d9", "disable_d3d11" ]
}
Change-Id: I196f6b44d7bb9e42ef47f61f4c28d8aa79afb7c4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Merely filling with Qt::transparent is not enough, as the default blend
mode of QPainter is QPainter::CompositionMode_SourceOver, where the alpha
of the source is used to blend the pixel on top of the destination. The
destination in the case of an FBO may contain garbage, and we end up with
the same garbage as the alpha is 0.
This was evident when running the ellipses and porter_duff/porter_duff2
tests on OS X. These tests can now be un-blacklisted.
Change-Id: I315fa764fa29fb3a06e38945a738a6feadf4502d
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
The test tried to position the mouse cursor over item #0 . This
sometimes results in the cursor being outside the window when
the window manager adds the window decoration on X11.
Move the cursor to the center of the window instead.
Add cleanup slot checking top level leaks, remove empty
functions.
Change-Id: I908240e1cc3fdbe370b43eae0015272ca342a312
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If we have a filter applied that removes all entries, the source
model is sorted, and then we remove the filter, QSortFilterProxyModel
never emits rowsInserted. This is because it doesn't have the correct
source mapping and doesn't update when the filter is removed.
Change-Id: I447b2d150e509b128d27f4dabc4e081ca4ef037f
Task-number: QTBUG-46282
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The rationale being that the empty string is not a valid path component.
[ChangeLog][QtCore][QDir] QDir::relativeFilePath() now returns "."
instead of an empty string if the given path is the same as the
directory.
Change-Id: Ibcf31904b2ae5edf5639d4c2e5ba234365d347fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Gives more information to user in case of failure. Also, fix the
order of parameters for some QCOMPARE's.
Change-Id: I3ea91f9602d4d32ac79027b6093caea749633c01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since of Windows (Phone) 8.1 most of the desktop's thread functionality
is also available, so we might be able to share the code and get rid of
the extra implementation for WinRT.
Task-number: QTBUG-43837
Change-Id: I0ce907cd94899834527f88c70e1e395bafdb14b3
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
This reverts commit a6000e2b66.
Temporarily remove this to unblock the qtdeclarative dev CI.
While Windows 8 VMs are fixed by this patch, Windows 7 has different
problems.
Change-Id: I45ef064ed953cc4b7bbf19657300d4fc43d82452
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
ad9698713f reduced the curvethreshold
for wide lines, to fix QTBUG-46151. But as a side effect, the
threshold was increased for lines of widths >=0 and <4. This commit
fixes that, and also adds a lance test for the issue in QTBUG-46151.
Change-Id: I52507db622435fe1d2646640cb0bd9cd8222e453
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Move the code path handling widgets embedded in QGraphicsProxyWidget
into the loop moving up the parent hierarchy.
Add child widget to test.
Task-number: QTBUG-41135
Change-Id: Ibd86413faaa927145a85a2f5864f162979135053
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This isn't specific to an Ubuntu version, unfortunately. It also fails
on OpenSuSE occasionally and other Ubuntu versions.
Change-Id: I6a1ca55a198270f1a1e8a9916e9f768762211550
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When the test fails, show the actual signals spy count.
Change-Id: Id7312bfbfb6531404a9df73234031f13295c80ea
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It's flakey with 'current > 42' sometimes succeeding and sometimes failing.
Change-Id: I86f52b0d0cecd345ed6c5852c822d12eae6acb26
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
