Attaching spies afterwards was provoking a warning during tests:
QFutureWatcher::connect: connecting after calling setFuture() is likely to produce race
Change-Id: I6ee8c3613cecebd1c69b0337139d8a19a33f4a11
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Skip the correct number of bytes in the read buffer when expanding '\n'
into "\r\n" upon writing.
Change-Id: I5b01fc47c330dee5c83001abf0acd7d63d790b96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This may result in incrementing an invalid iterator after the
iterator's container has changed. Also, for this to happen,
the view needs to have an active editor.
The reentrant call happens as follows in QTreeView, after the
model adds new rows to the view:
QTreeView::rowsInserted()
QAbstractItemView::rowsInserted()
QAbstractItemView::updateEditorGeometries()
QTreeView::visualRect()
QAbstractItemViewPrivate::executePostedLayout()
QTreeView::doItemsLayout()
QAbstractItemView::doItemsLayout()
QTreeView::updateGeometries()
QAbstractItemView::updateGeometries()
QAbstractItemView::updateEditorGeometries()
Other concrete item view classes may be prone to the same issue.
The fix consists in relayouting the items if needed, which should
trigger calling updateEditorGeometries() again. This doesn't
invalidate previous optimizations regarding item relayouting since
we only force relayouting when it'll be done by visualRect().
Change-Id: Id31507fdc8d9a84d50265298191d690d1a06792b
Task-number: QTBUG-48968
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test hasn't been run for years, so clean up. And besides, it's
extremely fragile and would depend on how IBM packages their OpenGL
libraries.
Change-Id: I1d0f78915b5942aab07cffff140f9db5a09ee7e2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Compare against isVisibleTo() in QLineEditIconButton::actionEvent()
so that action events received before show() are handled correctly.
Fix a regression introduced by change
4dccb2ca67 for handling action
events causing side widgets to overlap when added before the widget was
shown. Use QAction::isVisible() to determine visibility.
Task-number: QTBUG-48806
Task-number: QTBUG-48899
Task-number: QTBUG-39660
Change-Id: I7a39a3b9a094f2c74cde09544f1158deb2b81cf2
Reviewed-by: David Faure <david.faure@kdab.com>
This was never a documented feature, but happended to work before Qt 5.5.
It broke because the peoperty access went into the static function and are
now prefixed with '_t->'
So restore the behavior as it was by not including the parentheses in the
member name.
Task-number: QTBUG-47695
Change-Id: Ic3509ddea7ac9abc871e71f5bfbe81d04d08e9bc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The test blacklisted have been found using CI builds logs.
Change-Id: Iac07316862cff9b5085dacdf9f35e691cff09384
Task-number: QTBUG-27571
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
- Avoid duplication of slashes and use static variable for the
const part in settingsPath().
- Do not run expensive cleanup twice in init()/cleanup() as was
before by moving the code into a separate cleanupTestData()
function called from cleanup() and initTestCase().
- Use QDir::removeRecursively() (which should be able to deal
with readonly files, etc after 26bcc0565f )
instead of system calls or the special removePath() function for
CE/RT.
- Switch QStandardPaths into test mode.
Change-Id: Idcde2d17020eae1ea43e448266e3940c06f174ef
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QLatin1String wasn't really tested except as a drive-by.
Unearthed a discrepancy with docs. Fixed the docs.
Change-Id: I1246bb33888132edbc4e22da792a480a156357bf
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Check whether the action under the mouse is enabled before closing.
Task-number: QTBUG-48493
Change-Id: I2a0669840b9b6c81dacdf179325301c02f1c0c35
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The delegate may be null in QHeaderView.
Task-number: QTBUG-48543
Change-Id: I4d3ba104b0b57431e8765271dc2dc880be096672
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Numbers formatted in the C locale should not use group
separators by default.
[ChangeLog][QtCore][QLocale] The C locale does not use group separators
when formatting numbers any more.
Task-number: QTBUG-4044
Task-number: QTBUG-3068
Change-Id: Ia647a72efc11fecd66d22f9253562b1d4ef58168
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a macro is used with too few parameters, complaining about its
definition using '#' followed by something other than a macro
parameter name is apt to be confusing - reading the definition will
reveal that the name in fact is a macro parameter after all. The
reader needs attention directed to the invocation, not the definition.
Split the test in two: one to test the prior error message does in
fact get produced for an invalid macro definition, the other to test
the invalid invocation case.
Task-number: QTBUG-46210
Change-Id: Ie177a56d346e553bf9d67e2008a4352633afa1ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It simply is missing. We could wait for QStringView to come around, but
I need this function in uic _now_, so let's add it.
[ChangeLog][QtCore][QTextStream] Can now stream QStringRef without converting
to a QString first.
Change-Id: Idd178e0ba8a89c025f4533d46de912cbdb3883d5
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Now all Qt sequential containers consistently provide reverse iterators.
The associative ones, by way of not returning std::pair from op*, can't
just use std::reverse_iterator. They would miss .key() and .value() methods.
So that has to wait for 5.7.
The reverse versions of the new key_iterators can also just use
std::reverse_iterator, but I'm afraid that after bikeshedding over
keyRBegin() vs. rKeyBegin() vs. reverseKeyBegin() vs. rkbegin()
vs. krbegin() (<-- of course, what else?), it would anyway be too
late for 5.6, so defer, too.
[ChangeLog][QtCore][QLinkedList/QSet] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I58316fffade469e9a42c61d7aa1455ae3443fd94
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, only QXmlTestLogger had timers to take elapsed times
and log them. Move those into class QTestLog for access by
the loggers and output the times in the crash dump to make it
easier to spot hangs/recursion crashes.
Produces:
QFATAL : foo() Received signal 11
Function time: 22ms Total time: 23ms
A crash occurred in ...
Function time: 24ms Total time: 26ms
Task-number: QTBUG-47370
Change-Id: Ia530a63104087daffc9a15f68c15d93378b9407e
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If QTimer::singleShot() is used with a functor callback and a context
object with different thread affinity than the caller, a crash can
occur. If the context object's thread is scheduled before
connecting to QCoreApplication::aboutToQuit(), the timer has a change
to fire and QSingleShotTimer::timerEvent() will delete the
QSingleShotTimer object making the this pointer used in the
connection invalid. This can occur relatively often if an interval
of 0 is used.
Making the moveToThread() call the last thing in the constructor
ensures that the constructor gets to run to completion before the
timer has a chance to fire.
Task-number: QTBUG-48700
Change-Id: Iab73d02933635821b8d1ca1ff3d53e92eca85834
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Calculation was working as long as one didn't use per pixel scrolling.
Task-number: QTBUG-48579
Change-Id: Ie02e28b008c5c81ed45d7dd17fed96148c23b598
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QMetaProperty] write() now resets the property if an
empty QVariant is given, or set a default constructed object if the
property is not resettable
Change-Id: I9f9b57114e740f03ec4db6f223c1e8280a3d5209
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
if t >= QMetaType::User, we would not return false nor call convert.
We would then pass a pointer to whatever is in the QVariant to the
qt_metacall that is expecting a pointer to an object of a different type.
Since we have custom converters, we can call QVarent::convert even for
custom types anyway.
[ChangeLog][QtCore] Fixed crash when setting a QVariant of a different
type to a property of a custom type. Attempt to do a conversion instead.
Task-number: QTBUG-40644
Change-Id: Ib6fbd7e7ddcf25c5ee247ea04177e079f6d7de35
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Also re-enable and update the tst_showWithoutActivating test.
Change-Id: Ic7fa9b1bf7637e4661c593aaeabb3220cd4204ff
Task-number: QTBUG-46098
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QVersionNumber is now public API.
Change-Id: I5b21b6ce5f1651158b6f29bc6f06e5d4e133bed8
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
OldPersistentIndexes store selected items during sort operation. They
were wrongly taken from static list of indexes. This change takes them
from parent (QTableWidget) who maintains the list of selected segments.
Task-number: QTBUG-48408
Change-Id: Ie1bc4071a275dd76d113d883ab30ccd4cb1fa625
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The error return has been observed to vary.
Task-number: QTBUG-48566
Change-Id: Iecfe7819898a6a8a482c1b2251543193ecfa4841
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Source files should not be executable.
Change-Id: If9b9eaa6c8c7348ca6f48fa9253f3540e95aca37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- Introduce consistent error messages for failing QFile::open()
and existence checks to make errors about non-available
UNC paths on Windows clearer.
- Introduce a guard class to ensure the stdin reader processes
are terminated properly in case of failures, which currently
occur for MSVC2015.
- Fix brace coding style and remove unnecessary QString
conversions.
Task-number: QTBUG-48504
Change-Id: I890b13088558ef05391fb152a6b815276df0fe8c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Introduce error messages showing the path in file existence,
file type and directory entry list tests to make fails related
to missing UNC shares clearer.
Task-number: QTBUG-48504
Change-Id: I5fb401b94cfa8b58562a906b8d9765039e334027
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
It's accessed by QFutureWatcherBase::isFinished(), potentially before
anything has set it. It gets to be initially true until setFuture()
has given it us unfinished future and set it false.
Add a regression test for matching state in future and watcher.
Task-number: QTBUG-12358
Change-Id: Iae7bdaa434ab80f518afe4d7d55df99c391991a4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
- tst_QProcess::fileWriterProcess()
- tst_QProcess::readLineStdin()
- [tst_QProcess::readLineStdin_lineByLine()
The test fails apparently due to a bug in its runtime library
(fread() dropping data).
Task-number: QTBUG-48455
Task-number: QTBUG-48504
Change-Id: I972e560e88312cea0d3dbcea9450c59285a15d5a
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Verify exit status and code where applicable. Avoid unnecessary
data conversions in fileWriterProcess. Improve error handling in
helper processes.
Task-number: QTBUG-47370
Task-number: QTBUG-48455
Change-Id: Ib5c4f546027131db02caaa05154a5880edac5cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code still produces Internal Compiler Errors in release mode.
Task-number: QTBUG-46344
Change-Id: I86d3608b13a197a0b65b83829d1512203e1578f8
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
QByteArray::operator< and friends had their logic reversed.
Task-number: QTBUG-48350
Change-Id: I625209cc922b47e78dfb8de9fe100411f285a628
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test caused problems because it relies on the at-spi services to
run. In addition it could trigger orca (screen reader) to be launched
as a side-effect of the dbus call to the screen-reader-enabled setting.
Instead just export QT_LINUX_ACCESSIBILITY_ALWAYS_ON to make sure that
accessibility will work. This means we won't test the dbus startup any
more, but the test will be reliable.
There is still a dbus call to org.a11y.Bus to launch the service in case
it's not running yet.
Task-number: QTBUG-27732
Task-number: QTBUG-44434
Change-Id: Idb86ed98ca4b47cb209027c8b41529e7e5285197
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Instantiate the QProcess object on the stack to ensure resource
cleanup and remove the QProcess * member variable.
Use qobject_cast<QProcess *>(QObject::sender()) instead
of the member variable in the helpers slots to ensure that signals
from a leaked QProcess do not interfere with other tests.
Task-number: QTBUG-47370
Change-Id: Ifc0dccb7e4b18069d236df53bccdcb6a47df6346
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QDateTime values with a UTC offset are not correctly serialized with
QDataStream::Qt_4_0. So use a newer QDataStream format for this type and
mark it with "@DateTime" instead of "@Variant".
Task-number: QTBUG-46551
Change-Id: I211c89e8cd0211c949ec993e6ffd5192d0eebbb3
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Left and right were swapped which caused invalid selection ranges to be
emitted through selectionChanged.
Task-number: QTBUG-48402
Change-Id: I18692c2b50c49ab39065f9b360b37b7615227ee9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The explanation is in the code comment. Ever since QDBusConnections
began being processed in a separate thread, we were relying on the fact
that the main thread didn't begin processing its event queue until the
second event got posted (the event loop only exits after it has finished
processing all pending events). We had a race between the main thread
starting its processing, at which point it decides which is the last
event it will process, and the QDBusConnectionManager thread posting the
second event.
This is very fragile code, since it depends on the behavior of
QDBusConnectionPrivate (how it stores the signal relays in a hash) and
that of QHash with duplicate keys. This only works because the hash
key between the two connections is the same (it's only dependent on the
method name and interface name). If we ever begin using something that
isn't the same between "control" and "p", then with QHash's randomness,
we'll be racy again.
Change-Id: I42e7ef1a481840699a8dffff1406c3a4674ec3a6
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The test assumed that an event loop can be tested for emptiness
multiple times, which is wrong because an event can be delivered any
time.
Change-Id: Ic44245321eeed2091b640ada2c83d205b83a1cc2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This test when running on Windows has a race condition since in qthread_win.cpp the
finished signal is emitted before everything is cleaned up.
Change-Id: I3c03d9a245e297e8f79b2be2c34398bf7bac9bae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Most processors have carry flags which they set on addition overflow, so
it's a good idea to access them whenever possible. Most of them also
have widening multiply instructions that can be used to detect overflow
of the non-widening version.
Tested to compile on:
Architecture Compiler
x86 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 GCC 4.9, GCC 5*, Clang 3.6*, ICC 16 beta
x86-64 ILP32 GCC 4.9, GCC 5*, Clang 3.6*
IA-64 LP64 GCC 4.8
ARMv7-A GCC 4.9, Clang 3.6*
AArch64 Clang 3.6*
MIPS GCC 4.9, Clang 3.6*
MIPS64 GCC 4.9, Clang 3.6*
PowerPC GCC 4.9, Clang 3.6*
PowerPC 64 GCC 4.9, Clang 3.6*
SPARC Clang 3.6*
SPARCv9 Clang 3.6*
[*] supports the intrinsics
If the compiler does not offer a way to detect an overflow, we do it by
hand. For unsigned additions, that's easy, since the C++ language
specifies the behavior of the overflow. That's also the reason why this
code is implemented only for unsigned integers.
For the multiplication, if the compiler does not support widening
multiplications, we do it with a division instead. This is necessary for
GCC < 4.5 and compilers not compatible with GCC or MSVC.
Change-Id: I049a653beeb5454c9539ffff13e637de0f1338c1
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The timeZone() function used to assert when called on such an object
(or, for a release build, return an invalid time zone).
Change-Id: I6ae8316b2ad76f1f868e2498f7ce8aa3fcabf4a6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Without piping the output to /dev/null, we'd get the following:
sh: dbus-send: command not found
And if dbus support is only limited to runtime support, we don't
treat it as a fatal error and only notice the user.
Change-Id: Ia7750a074b8d563bf9694fa8fa628b4017e8bb68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When working with QGraphicsView/QGraphicsScene, touch events are sent to
QGraphicsView's viewport() event handler, which then dispatches it to the
corresponding QGraphicsItem, if any. In the case of QGraphicsProxyWidget, we
need to forward these touch events to the encapsulated QWidget, otherwise it
will never receive them (i.e. the event chain for touch events terminates at
QGraphicsProxyWidget).
This also enables QWidgets associated with QGraphicsProxyWidget to grab
gestures.
Task-id: QTBUG-45737
Change-Id: Ia441d3576afb6c97376be6f2ff073901e6e928a5
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The derived classes (QSpinBox, QDoubleSpinBox, QDateTimeEdit, QTimeEdit)
set various input method hints on the spin box in the init() methods
of their private classes which did not have any effect since
QAbstractSpinBox::inputMethodQuery() was implemented to return the
hints of the embedded QLineEdit only. Change it so that hints set
on the QAbstractSpinBox are also considered.
Change-Id: I76b7c4d3e0869589c110cf3a0b2c3f94201db5d5
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
In some cases it's not possible to use QT_HASH_SEED, specially when
we need to set the environment variable from inside the application,
as dynamically loaded libraries or plugins may create static QHash
instances. That would set qt_qhash_seed to a value different from
-1 and skip the env var value.
For those cases, and when we still want to set qt_qhash_seed, we
provide a way to enforce its value.
Auto-tests accessing qt_qhash_seed directly have been updated
accordingly. Usage in qdoc, uic and rcc has been left as is
for the time being.
Change-Id: I3b35b4fa0223c83b1348a6508641905a2a63266f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test is moved from tst_qtreeview to tst_qtreewidget as it tests
qtreewidget class.
C++ usage is fixed, there was an illegal C cast that was causing crashes
Change-Id: I80e90a9b531e87f9b133186b6f48be42f54901b5
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
According to MSDN, the zero value of ICONDIRENTRY bHeight and bWidth
fields mean a maximum icon size 256 pixels. So QtIcoHandler::option()
should return 256 instead of 0 pixels for such icons. Also there is
fixed wrong seek offset at the second call on this method.
http://blogs.msdn.com/b/oldnewthing/archive/2010/10/18/10077133.aspx
Task-number: QTBUG-48103
Change-Id: I99f0c9720fd58889045b0c73c51498f2065b0b91
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
By serializing the capitalization value of QFont, it ensures that it is
correctly preserved when QPicture streams it and later plays it back.
Subsequently the QDataStream version has been bumped up to account for the
change of the data format for serializing QFont.
[ChangeLog][QtGui][QFont] QFont now serializes the capitalization setting.
[ChangeLog][Important Behavior Changes] QDataStream version bumped up to
17 to account for changes in the serialization of QFont.
Task-number: QTBUG-15214
Change-Id: I042680760e5a69d18d41e786b7500a3eebbe562f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
It sends a shortcut override event directly, which should go
though QPA anyways.
Change-Id: Ie2c6f45cd44222cd9be8846099573dcd2968a77c
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
P2P connections don't have senders and receivers, so asking
QDBusConnection to connect to a signal with a sender was a mistake
(added in 5368e44a86). Due to an internal
bug, this never presented itself -- double fault.
Fix the connection so that we don't get unit test failures when the bug
is solved.
Change-Id: I9a75ad8521ae4e5cbbe5ffff13d1a78b7dea6d07
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
With kdbus, we won't have a regular signal, but instead a special
message. So keep the logic of what to do in QDBusConnectionPrivate.
The #ifdef is to make sure the bootstrapped qdbuscpp2xml continues to
build in cross-compilation environments.
Change-Id: Iee8cbc07c4434ce9b560ffff13d06f0d9904cb6d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Now we know that all timers and socket notifiers get created only in the
QDBusConnectionManager thread.
Incidentally, this reduced code duplication.
Change-Id: I27eaacb532114dd188c4ffff13d5075a8d2efb0b
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Each application will have one thread dedicated for this, for all
QDBusConnections. I wouldn't mind sharing such a thread with other uses
in Qt, provided none of them ever block (the QProcessManager thread
comes to mind, but it's going away soon).
The cost associated with this change in this commit is so far rather
minimal. All incoming D-Bus calls need to be handled after an event is
posted anyway, to avoid deadlocking on reentering libdbus-1 functions
that acquire locks still held. The cost is the one more thread running
and the cost of synchronizing them when an event is posted.
The benefits far outweigh that cost: no longer will we have problems of
QtDBus failing to run if the main system or session connections are used
before QCoreApplication is run. Moreover, events can be received and
handled in aux threads even if the main thread is blocked on some
operation.
Note: this commit may not be testable (tst_qdbusconnection may fail)
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b737556ccd11a8
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This simplifies the code a little by having a single code path. More
importantly, we no longer need to call the evil function
dbus_connection_send_with_reply_and_block. That function acquires a lock
on the socket transport inside libdbus-1, which means all threads need
to wait until the one call gets unblocked before they can continue.
To do that, this commit reimplements the QDBus::Block part of
QDBusConnectionPrivate::sendWithReply by reusing the existing call to
sendWithReplyAsync() and then doing a blocking-wait with
QDBusPendingCallPrivate::waitForFinished().
By using (Q)DBusPendingCall and the threaded connection approach (next
commit), now we never block on the socket. That also means the code to
call dbus_pending_call_block() is no longer necessary and the
waitForFinished() function itself can be considerably simplified.
As a side-effect of no longer blocking, a number of pre-existing race
conditions that used to be hidden showed up.
Note: this commit deadlocks without the threading (next commits).
Task-number: QTBUG-43585
Change-Id: Ic5d393bfd36e48a193fcffff13b73754954a3f7d
Reviewed-by: Albert Astals Cid <aacid@kde.org>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
To handle network events, QEventDispatcherWin32 uses I/O model
based on notifications through the window message queue. Having
successfully posted notification of a particular event to an
application window, no further messages for that network event
will be posted to the application window until the application
makes the function call that implicitly re-enables notification
of that network event. With these semantics, an application need
not read all available data in response to an FD_READ message:
a single recv in response to each FD_READ message is appropriate.
If an application issues multiple recv calls in response to a
single FD_READ, it can receive multiple FD_READ messages
(including spurious).
To solve this issue, this patch always disables the notifier
after getting a notification, and re-enables it only when the
message queue is empty.
Task-number: QTBUG-46552
Change-Id: I05df67032911cd1f5927fa7912f7864bfbf8711e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Disable input and cursor for QGuiApplication instances used in
autotest to initialize it properly.
Change-Id: I78dc9b776269c082c20f244a51f858289129275d
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
An invalid mime magic definition could lead to an assert. Replaced with
a qWarning. Move all checking to the QMimeMagicRule constructor, and do
keep invalid rules since they are need to parse child rules.
Unit test added, with QTest::ignoreMessage when using the XML backend
(there's no warning from update-mime-database when using the cache).
Also make it easier to add more shared mime info files for tests.
Task-number: QTBUG-44319
Done-with: Eike Ziller <eike.ziller@theqtcompany.com>
Change-Id: Ie39a160a106b650cdcee88778fa7eff9e932a988
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it easier to capture information about crashing tests in log files,
since it is not possible to do something like
foo > log.txt 2> errlog.txt
on Windows.
Adapt selftest.
[ChangeLog][QtTest][Important Behavior Changes] Crash/exception
information is now logged to standard output on Windows.
Task-number: QTBUG-47370
Change-Id: I3e6a2d25855ed0f20516418a031990b562f5f757
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The logic used in the FreeType font engine can be generalized
and move to the QFontEngine baseclass. This allows the CoreText
font engine to correctly report the minimum left/right bearings,
which decreases the chance that an optimization in QTextLayout's
line breaking algorithm will produce wrong results.
The calculation of left and right bearing has been moved to the
glyph_metrics_t type to reduce code duplication. This allows us
to use the with and height of the bounding box to determine if
the glyph has any contours.
Change-Id: I864697d3f31ed56f22f04666199b6c5023c5e585
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
At the edge of the view, a line segment could end up as not producing
any pixels even if not clipped by the floating-point clip
routine. Make sure the starting point for the next line is still
updated correctly for any significant segment lengths.
Change-Id: I381a4efb81ce6006f3da4c67abf279aea79e4663
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
If Qt is not running its own event loop (e.g. if Qt is a plugin running
in a non-Qt host application with its own event loop, a call to
sendPostedEvents() should process all events by default, and not depend
on the flags passed to the last call to processEvents()
We also modify sendPostedEvents() to call its base implementation instead
of directly calling QCoreApplication::sendPostedEvents(). (The behavior of
the base implementation is the same, so no behavior change there).
This also adds a test for QWindow event handling without Qts event loop is
running. This is a black box test, just to ensure that basic functionality
is working. It can be extended later.
Task-number: QTBUG-45956
Change-Id: I7d688c0c6dec5f133fb495f07526debdde5389af
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
RCS files (text/plain) have the glob pattern "*,v", which caused
the regular expression match to fail.
Task-number: QTBUG-47923
Change-Id: I7d8682ef51306cb4da58a2b3880842bd99892ea3
Reviewed-by: David Faure <david.faure@kdab.com>
Newer test functions don't have those. Removing those comments makes
the code consistent.
Change-Id: I542b89e797ef061395ce1fc87d848195e6f81f35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Input context selection works differently across platforms. On some
platforms it is not possible to request a specific context at all
(e.g. Wayland). This will be unified, depending on the environment
variable "QT_IM_MODULE", you will get:
- null: default (platform) context, if defined (otherwise no context)
- empty: no context
- set: set one, if it exists and is valid (otherwise no context)
[ChangeLog][Platform Specific Changes] Haromnized input context selection.
QT_IM_MODULE environment variable will be taken into account.
Change-Id: Ic8f826fbc6ace25941cd19b9b086943e848fbe01
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Nedim Hadzic <nedim.hadzic@pelagicore.com>
This commit changes the readDatagram() and writeDatagram() virtual
functions to take a QIpPacketHeader as meta data, instead of a
QHostAddress/quint16 pair. As previously, the header is an "out"
parameter for readDatagram() and an "in" parameter for writeDatagram().
The header pointer in readDatagram() is allowed to be null if the
PacketHeaderOptions indicates WantNone. Otherwise, it must not be null.
The extra options parameter is introduced because we may not always want
all the metadata upon reception. For sending, we know what to include or
not based on what's set in the incoming header parameter.
QIpPacketHeader splits sender and destination because we'll be able to
return both on datagram reception.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4213255008c7
Reviewed-by: Richard J. Moore <rich@kde.org>
QDateTime::addSecs needs to do something similar, but not identical
because it needs the number of days too. And then there are daylight
savings transitions...
Task-number: QTBUG-47717
Change-Id: I7de033f80b0e4431b7f1ffff13f976f4f5e5a059
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Mostly related to IPv6, because Q_IPV6ADDR is an array of char, so the
compilers were generating byte access to each value. Instead, force
access as 32- and 64-bit in most places that make sense (64-bit access
decays to 32-bit on 32-bit machines). In one isLoopback(), this is now a
128-bit access for best improvement.
Some smaller improvements relating to SpecialAddress by combining the
three IPv4 special addresses.
Change-Id: I7de033f80b0e4431b7f1ffff13f932b1cd7b5d21
Reviewed-by: Richard J. Moore <rich@kde.org>
Playing with the offset argument of pcre_exec is not equivalent to
adjusting the pointer to the subject string. In particular, PCRE
can go behind the offset to check for lookbehinds or "transition"
metacharacters (\b, \B, etc.).
This made the code that deals with QStringRefs not matching in behavior
with the corresponding code dealing with QStrings. For instance,
QString subject("Miss");
QRegularExpression re("(?<=M)iss");
re.match(subject.mid(1)); // doesn't match
re.match(subject.midRef(1)); // matches!!!
Instead, actually adjust the pointer to the subject string so that
the behavior is identical. A broken test that relied on the
equivalence is also removed.
Change-Id: If96333241ef59621d7f5a6a170ebd0a186844874
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Ensure QAction::setVisible() is
handled and reposition if visibility changes.
Task-number: QTBUG-39660
Change-Id: I14f0659aedc8dc89ddef3159d3a500b40b1563ff
Reviewed-by: David Faure <david.faure@kdab.com>
We don't replay mouse events after closing popups on X11.
This leads to the bug when the menu doesn't show after
clicking three times on the menu bar. It can be fixed by
reverting 78d7192338, but
then we need an alternative fix for QTBUG-32807 on Windows.
So don't replay mouse events for the menu bar on all
platforms.
Change-Id: I3db8e24a6de6f35b0a17dffac6a131f1cad42e6d
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Give setStandardOutputFile2 a sensible name, move it to where it
belongs and remove bogus Q_OS_WINCE ifdef.
Change-Id: I5c843e8b6cb626979966f3e61f7a7c720173bb28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Do not call bytesAvailableInChannel if the source pipe end is
invalid. This is the case when redirecting channels on Windows.
The assertions in bytesAvailableInChannel were triggered whenever
an output process or output file was set and waitForBytesWritten
was called.
Task-number: QTBUG-45548
Change-Id: I225dfea2c5e27e122f75008a3a06d425554e00fe
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Drop process output to nullDevice(), if an application does not request
forwarding, redirecting or reading from the device channel. This
prevents from accumulation of unnecessary data which can not be read.
Change-Id: Ia311a8c658a46cf580ffa9484c5369f3fc5f98a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The generated xml file is now lowercase.
This was changed in shared-mime-info 3805d0bcf2.
It led to runtime warnings "No file found for ...", which helped notice the bug.
Change-Id: I31f0fc7f0fe8a098c3f79c0bcbeeb1909d2cc05a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The buffer may have been left dirty if we were unable to write all the
data to the child process in the previous run. So ensure we clear it
before starting a new one. We already did that for stdout and stderr,
for some reason.
Task-number: QTBUG-44517
Change-Id: I1a800c709d3543699131ffff13c419da3bbffacf
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This complements QHostAddress::isLoopback. The only missing check now is
for the "Any" address types, though operator== is quite fast nowadays.
Change-Id: Iee8cbc07c4434ce9b560ffff13cc2691e15014b6
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead, we use the binary MySQL encoding and copy the data directly
into the QVariant of the desired type. This gets rid of the temporary
string allocations and greatly improves the performance of the added
benchmark. On my machine, the results are:
Before:
0.562 msecs per iteration (total: 563, iterations: 1000)
1,922,479.330 instructions per iteration (total: 1,922,479,330, iterations: 1000)
After:
0.381 msecs per iteration (total: 381, iterations: 1000)
774,132.957 instructions per iteration (total: 774,132,958, iterations: 1000)
Note that the same could be applied to floating point data types in
the future. Additionally, special support for MYSQL_TIME structure
coult be added to get rid of the string conversions there.
To ensure everything keeps working, a new auto test is added as well
that verifies the select statements and insertions of integral data
into a MySql table works as intended.
[ChangeLog][QtSql] Improve performance when reading integer values
from MySQL databases via prepared statements.
Change-Id: I21dd9277661971ded934546f09535014b63f8eb8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It failed on Windows due to readonly files copied from the resource,
until adding a setPermission call.
Change-Id: I1d42b53763583aca73d011e0f2bbf061ef6aa891
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
In C++, type punning with a union is not allowed. It will result in
compiler defined behavior at best, and undefined behavior at worst.
Specifically, if QRgba64 is passed to a function by value, the different
members of a struct might be passed in separate registers. This means
that any write to the quint64 might not blank out the values of the
struct whenever the compiler looses track with TBAA.
Change-Id: I991b5492fe4bb13a14bb670fef5bf13dacbe6c0a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Just like from RGB32 to RGB30 we must also repremultiply when converting
from RGB64 because the alpha channel loses more precision than the other
color channels.
Since this is not approximated accurately in the simple blending
functions and the functions are no longer needed now the main render
engine supports higher accuracy, the simple blending routines for RGB30
have been removed.
Change-Id: I2b7b8eb015e330a487848fc4370ad3a1e966be91
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Have an autotest to prevent introducing JSON syntax errors
that become apparent only at runtime.
Change-Id: If2bcbf4d227fddcbeb9c095b7986bada078131d7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On Windows and OS X, where QStandardPaths does not use XDG_DATA_DIRS/
_HOME and shared-mime-info is not installed, the tests that require
additional shared mime info xml files were never run.
Mend that by using QStandardPaths' test mode instead of setting
XDG_DATA_HOME.
Change-Id: I53b75c293c41c4dac63986dcb88972c2b54d5428
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The test is very flakey in 5.5 integrations and the OS X CI machines have
notorious problems with networking stability. So the previously listed tests
are not really at fault, it's an infrastructure problem, that we choose to
ignore for the time being.
Change-Id: I7fbfa7b3778daa6b5e60d95b822847c92927122f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
SecureTransport does not implement QSslCertificatePrivate thus some
tests relying on generic version fail. Skip them for now.
Change-Id: I483340b37786a8a556e954b2c538e4f48a342be9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The former didn't account for ascent and descent.
Change-Id: If741f22f7e79ac3c13e58f2966358010d9f9ec81
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
[ChangeLog][Important Behavior Changes] QDebug output for QStrings
changed compared to Qt 5.5.0 to more closely match the output of
previous Qt versions. Like Qt 5.5.0, QDebug will escape non-printable
characters, the backslash and quote characters, but will no longer
escape the printable characters.
Task-number: QTBUG-47316
Change-Id: I52dd43c12685407bb9a6ffff13f62ef68cbc80c5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, on some systems (Windows), we'll always create the same dirs.
Change-Id: Id3d5c7bf4d4c45069621ffff13f79ba91e0f974b
Reviewed-by: Christopher Adams <chris.adams@jollamobile.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtCore][QLoggingCategory] Fixed behavior of default
severity passed to constructor or Q_LOGGING_CATEGORY with regards to
QtInfoMsg, which was previously treated as being more severe than
QtFatalMsg.
This is because the code was using the numeric value of QtMsgType as a
proxy for severity (via the <= operator), but the value of QtInfoMsg is
greater than QtFatalMsg. Instead, the severity ordering must be dealt
with explicitly.
Change-Id: I5f178afc735221b00cb67c2cea4fa964bd9079ce
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Build it only in -developer-build mode for tests that might depend
on exact-matching font behavior.
Return earlier to avoid doing any useless job.
Change-Id: I966ee5689f03403e45f4c957b63e3113f0467803
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
All overloads of QProcess::start will now check whether the program
string is empty and in that case
- set error to FailedToStart,
- set errorString to "No program defined",
- emit error.
Until now only one of the three overloads behaved like this.
As a side effect, start(QString(), QStringList()) will not crash on
Windows anymore.
Task-number: QTBUG-47404
Change-Id: I2f93657204fe3643b1d74a74817843c05fc4a96b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I4e4a319c5918d697a33f6d6032c36b8c9660ca05
Reviewed-by: Andy Shaw <andy.shaw@theqtcompany.com>
Introduce overloads in the API to allow specifying multiple color
attachment sizes and formats. When these are in use and MRT is supported,
a texture or renderbuffer is created for each of GL_COLOR_ATTACHMENT0, 1, 2, ...
[ChangeLog] Added support for multiple render targets in QOpenGLFramebufferObject
Task-number: QTBUG-39235
Change-Id: Ie7cfd81d1b796a9166b80dff7513aafe0120d53d
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
According to history, the test was supposed to verify
the correct parsing of the command line on Windows by the qWinCmdLine()
function in corelib. It did not test anything since the test
application printed out argv[1] instead of
QCoreApplication::arguments()[1]. Since qWinCmdLine() has been replaced
by the WinAPI CommandLineToArgvW(), the test no longer makes sense
and also starts to fail then warnings are printed to the error output.
Change-Id: Idf642783ebb56eaa8fba9004174557485563a84f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(hash.keys())
[ChangeLog][QtCore][QHash] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: I1f9db8a7a4294e1556cbb50b8fe5ebdcf0dc29a2
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So we can have interoperability with algorithms.
Motivated by inefficient code like qDeleteAll(map.keys())
[ChangeLog][QtCore][QMap] Added key iterators, accessible through
keyBegin() and keyEnd().
Change-Id: Ieee2f9ad031e9d1e845a71447746699bbe95b96c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Rename the test slot eventFilter() to testEventFilter(), which fixes:
tst_qgraphicsproxywidget.cpp:101:10: warning: 'tst_QGraphicsProxyWidget::eventFilter' hides overloaded virtual function [-Woverloaded-virtual]
void eventFilter();.
Change-Id: Ia05d188b18dcbf3a0b093dcea19a7122bcde6e62
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qgraphicsanchorlayout.cpp:144:5: warning: ignoring return value of function declared with warn_unused_result attribute [-Wunused-result]
layoutGeometry.adjusted(+right, +top, -left, -bottom);
Change-Id: I411ccaa867e418f36869fc244ea2eeaa5b117312
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
in tests/auto/other, tests/auto/printsupport and tests/auto/xml.
Change-Id: I28cbdc89d36791f179425f17f90b697c60660938
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I7add5b7afeba83895acdcbed110e8275dc76864a
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The history state had the limitation that it was hard (or impossible) to
use when more than one default state had to be entered. For example,
using it in a parallel state was impossible without ending up in an
infinite loop.
This patch changes the QHistoryState to only have an initial transition,
and the state selection algorithm is changed accordingly. It also brings
QStateMachine closer to the SCXML standard.
The existing defaultState is implemented on top of the
defaultTransition: when used, a new transition, with the default state as
its target, is set as the defaultTransition.
Task-number: QTBUG-46703
Change-Id: Ifbb44e4f0f26b72e365af4c94753e4483f9850e7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
A parallel state cannot have an initial state, as all children of the
parallel state will be entered. Setting such an initial state on a
QState marked as ParallelStates would already produce a warning and
ignore the initial state. Now any initial state that has been set before
changing the child-mode to ParallelStates will also produce a warning
and remove the previously set initial state.
Change-Id: Ie5fcd44b03516744f785f2d1880bf806918c44d4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add QTRY_VERIFY2_WITH_TIMEOUT() similar to QTRY_VERIFY_WITH_TIMEOUT()
except that QTRY_VERIFY2() is used below the loop and QTRY_VERIFY2()
based on it.
Add tests to cmptest.
[ChangeLog][QtTest] Added macros QTRY_VERIFY2_WITH_TIMEOUT(), QTRY_VERIFY2()
making it possible to output a message after the timeout has expired.
Change-Id: I587e24f3aeb73542dbf3ccb936a16f2e0806555f
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Set QFileDevice::WriteUser on all files extracted from resources. These
are read-only, which is preserved by QFile::copy(). This caused the
deletion of the temporary directory to fail on Windows.
Change-Id: Id99de9160471c38bcec68025c89cfabbe209bdbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QProcess] Fixed a bug that caused QProcess to launch
a child process on Unix even if the directory specified with
setWorkingDirectory did not exist.
Task-number: QTBUG-47271
Change-Id: Ib306f8f647014b399b87ffff13f195158b0e52f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We force a recreation of the library paths with added information on
construction of QCoreApplication. This way we can find plugins in
the application directory which only becomes known when
QCoreApplication is created. When the user changes the library path
we create a new list of the manually modified library paths and
recalculate it from the delta of original vs. modified paths when
QCoreApplication is created.
The upsides of this approach vs. keeping an explicit delta are:
* We don't need to introduce a separate data structure to hold
the added/removed status for delta items or the information that
the whole list got replaced.
* The lists never get larger than the the real library paths. An
explicit delta would have to record all modifications.
* I don't think the delta replay algorithm we would have to do
anyway could be made much more compact than the one this change
introduces.
Of course, if the user actually changes anything, the list is
duplicated. Considering that this is a rarely used function and
that we would have to save some extra information anyway, I think
we can live with this.
Task-number: QTBUG-38598
Change-Id: I3bfbbd1be62dd5804dcc7ac808b053428a4e3149
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This is low-hanging fruit, for two reasons:
1. The implementation is dead-simple (unlike, say, in QList).
2. It's completely transparent to the QVector user (unlike,
say, emplace_back, which can only be used inside an ifdef).
Change-Id: Iaf750100cf61ced77aa452f0e4e3c4ec36b29639
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
FileInfo is larger than a void*, so holding them in a QList is needlessly
inefficient. Worse, the code could come to depend on the fragile property
of (inefficient) QLists that references to elements therein never are
invalidated.
Change-Id: I772177c5ac544a5fecce2368f628148308ef260f
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The overload was added for NokiaX86 and RVCT and is bound for
removal.
Task-number: QTBUG-47260
Change-Id: Ic67cee8769847956e16cd0470ebcd663a9e98a40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Long-lived threads started by Qt itself can now receive events even if
QCoreApplication hasn't been created. This is required in all threads we
start that will handle events, unless we're sure that the thread will
exit before the global application object begins destruction.
Otherwise, those threads will have race conditions dealing with the
event delivery system trying to call the QCoreApplication::notify()
virtual while the object is being destroyed.
Change-Id: I27eaacb532114dd188c4ffff13d4ad2a4bb443e6
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Otherwise, if I open tests/auto/dbus/dbus.pro in Qt Creator, it shows me
"test", "test2", "test3", "test4" and it's very hard to know which test
is which.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0654696c025b7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
From MSVC 2015 onwards, MSVC formats floats using printf("%g") like
g++, so the fiddling of the expected output needs to restricted
accordingly.
Change-Id: I6e7f78e5e90f70886a8b2ef37c0fb9bf82b5e1a3
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
When running the test, one gets the impression that it hangs.
Add some debug output including time to show what happens.
Change-Id: Iac6b4f0518ecec62169bf2269a0a8ec9192da570
Reviewed-by: David Faure <david.faure@kdab.com>
On Windows, having read-only files in a directory can cause removal
to fail. When file deletion fails, check on the permissions, set
write permissions and retry.
Split apart code paths by OS in tst_QDir::removeRecursivelyFailure();
deletion of the read-only directory on UNIX should still fail.
Change-Id: I36e54be5229a7b552e90fd5f42722b868fa0b6ee
Reviewed-by: David Faure <david.faure@kdab.com>
The test showed failures on OS X:
FAIL! : tst_QListView::batchedMode() Compared values are not the same
Actual (ba.size()): 2
Expected (3) : 3
Loc: [tst_qlistview.cpp(848)]
Use QTRY_COMPARE() to count the number of visible indexes with
a helper function instead of using hard-coded timeouts. Item 3
appears with a little delay on OS X.
Change-Id: I2fb2ff5ebdf9dbe85bdc79401375ad6f47b7b12b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test checks whether a child window receives
mouse events synthesizes from touch. Enlarge the child
window so that it fully covers the parent and move the
touch point a bit inside so that it is not affected
by window manager positioning issues.
Use QTRY_VERIFY.
FAIL! : tst_QApplication::touchEventPropagation() 'widget.seenMouseEvent' returned FALSE. ()
Loc: [/work/build/qt/qtbase/tests/auto/widgets/kernel/qapplication/tst_qapplication.cpp(2107)]
Change-Id: Ic08e68b1e547cc7148cd8994464fdc2a14ac507b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test sends touch events to the root item at the top left
corner which fails if the views starts to scroll.
Make the view sufficiently large to prevent scrolling and align
at top left.
FAIL! : tst_QTouchEvent::touchBeginWithGraphicsWidget() Compared values are not the same
Actual (((root->touchBeginCounter))): 0
Expected (1) : 1
Loc: [/work/build/qt/qtbase/tests/auto/gui/kernel/qtouchevent/tst_qtouchevent.cpp(1471)]
Change-Id: I357322ccc809ddb5cb587febf3c75cbe497e59d8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
An object that throws in its constructor cannot be reentered. This
violates both C++11 and C++98. It's also a regression from MSVC 2013.
The unit test is renamed to indicate what it really does, as opposed to
a misleading name that was probably a "thinko" on my part.
Task-number: QTBUG-47224
Change-Id: Ib306f8f647014b399b87ffff13f132436d0578ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QTemporaryFileEngine does not store the pattern, so it needs to get it
again from QTemporaryFilePrivate prior to reopening the file. It's
possible to lose the pattern when remove() is called on the object.
Task-number: QTBUG-46156
Change-Id: I66a35ce5f88941f29aa6ffff13dfc7f83d4fa3a2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Make the name of the signal and the name of the getter unambiguous,
which in turn allows the easy use of Qt 5-style connects.
[ChangeLog][QtCore] Deprecated QProcess::error() signal in favor
of new QProcess::errorOccurred() one.
Change-Id: Ic5bcf7d6878e6985f1b4fed9dbe247527d13758c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The test is crashing regularly (see bugreport).
Currently the test is not run in the regular CI system, that is why
the failures were not noticed.
Task-number: QTBUG-47128
Change-Id: I70d4ada0872316cc63d7629bb9ab2d055d70cf2a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
There was an attempt to allow static instances of QIcon in
7727a4355876607a1a022ff54e2570dae883f79c (Qt 4). This patch does only
solve some of the corner cases and broke with
aa5f70c00a. Since the "breakage" has been
there for two years, let's officially declare it unsupported instead of
trying to work around the issue.
Change-Id: I61e12fd03953763ee2e70eae58bcaecabdcb85b8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We have ownership for a reason - and there seems to be
no good reason not to accept it here.
[ChangeLog][QtWidgets][QComboBox] QComboBox::setView no longer
deletes the old view directly. It now checks the ownership first.
Change-Id: Icb5e5c0a6e9dc93c1d1c1a90ff57fbcc0786aa60
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
On Windows, t->timeout was updated only once, at creation time, so the
timer would always show as "overdue" after the first activation.
The timer is updated to indicate the full remaining time during the slot
activation, which is the behavior of the Unix and Glib dispatchers.
Task-number: QTBUG-46940
Change-Id: I255870833a024a36adf6ffff13ecadb021c4358c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Sending several key presses with repeat=true should trigger the action
several times, unless autoRepeat is set to false.
Change-Id: I6469bbd78a608a87852554882c1632ce34422662
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Not all empty states were considered equal.
[ChangeLog][QtCore][QProcessEnvironment] Fixed a bug in
operator== involving different empty states.
Change-Id: I13c3200897847475bde2f963db0d2c587336b8a7
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Wasn't checked, and with all the mutex locking going
on under the hood, we better rule out that there's a
deadlock.
Change-Id: I5a2ef1a524fb42b7840c9f3c18395cde05b7ef28
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QByteArray] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: Id5aefb52635f029305135afcd99db0b036a7af82
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to mark {,c,const}{begin,end}() inline, since they are, and mingw
complains about inconsistent dllimport attributes.
[ChangeLog][QtCore][QString] Added rbegin(), crbegin(), rend(), crend(),
and reverse_iterator and const_reverse_iterator typedefs.
Task-number: QTBUG-25919
Change-Id: I1d48729c76e510c1e49c0e5dc41691aa662fdf21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With two alpha-bits half opacity can not be represented, so we must use
one third (85) instead of half (127).
Change-Id: I2b3f1c983a3034196bf2604840945ad3a81f5b38
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
QLocales can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtCore][QLocale] Added qHash(QLocale).
Change-Id: Ia0fdf1207b842b9bb20b8f9ab0165016915debf4
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Keeping the reference may end up in a crash if a created
QIcon outlives the QFileIconProvider and we then try to
generate a pixmap.
The reference is not necessary since the options are queried
only when creating the icon, so they can be saved in the icon
provider.
Task-number: QTBUG-46755
Change-Id: I5c60887c2ed39030a2a20298ff10fd652189e4e7
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
When executing the test in a sequence (as done by make check after
tst_qstackedlayout), tst_QToolTip::task183679 often fails since
apparently the tooltip is hidden when the cursor is near it.
Move to the cursor to the right corner of the widget to fix this.
Change-Id: I3b13239e77cb387f1b1425fab79c8d6faa27b5bb
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change all functions instantiating a QFormLayout without widget on
the stack to use a toplevel widget and pointer variables since
otherwise, the labels automatically created by a call like
QFormLayout::addRow("bla", widget) leak.
Change-Id: I72a7a9c3175b5793a9450c6fcb970012ccd2274b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Instantiate widgets on stack and add cleanup function for the check.
Change-Id: Ia527c228f9173d1b5aeba94ba4e14e1beba60731
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Gather member variables testWidget, testLayout, w1..w3 and sp
used in getItemPosition() and itemAtPosition() in Helper
class ItemTestWidget.
Remove member variables m_grid, m_toplevel and instantiate the
top level widget on the stack in minMaxSize().
Remove empty slots and functions.
Add a cleanup() test checking that no visible top levels
are leaked with explanatory comment about data driven tests.
Change-Id: Ia30120d78144dab3b7c73864c6fbcef606cb19d3
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
os.version is the kernel version which is just not very useful or easy to
use for us. Instead, introduce a string that allows easy differentiation
between Windows 7 and 8.
From the adapter identifier the driver description is often helpful too,
especially in virtual machines.
These allow writing rules like:
{ "description": "Use WARP in some Win 8 and 8.1 VMs",
"os": { "type": "win", "release": [ "8", "8.1" ] },
"driver_description": "VMware SVGA 3D",
"features": [ "disable_desktopgl", "disable_d3d9", "disable_d3d11" ]
}
Change-Id: I196f6b44d7bb9e42ef47f61f4c28d8aa79afb7c4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Merely filling with Qt::transparent is not enough, as the default blend
mode of QPainter is QPainter::CompositionMode_SourceOver, where the alpha
of the source is used to blend the pixel on top of the destination. The
destination in the case of an FBO may contain garbage, and we end up with
the same garbage as the alpha is 0.
This was evident when running the ellipses and porter_duff/porter_duff2
tests on OS X. These tests can now be un-blacklisted.
Change-Id: I315fa764fa29fb3a06e38945a738a6feadf4502d
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>
The test tried to position the mouse cursor over item #0 . This
sometimes results in the cursor being outside the window when
the window manager adds the window decoration on X11.
Move the cursor to the center of the window instead.
Add cleanup slot checking top level leaks, remove empty
functions.
Change-Id: I908240e1cc3fdbe370b43eae0015272ca342a312
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If we have a filter applied that removes all entries, the source
model is sorted, and then we remove the filter, QSortFilterProxyModel
never emits rowsInserted. This is because it doesn't have the correct
source mapping and doesn't update when the filter is removed.
Change-Id: I447b2d150e509b128d27f4dabc4e081ca4ef037f
Task-number: QTBUG-46282
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The rationale being that the empty string is not a valid path component.
[ChangeLog][QtCore][QDir] QDir::relativeFilePath() now returns "."
instead of an empty string if the given path is the same as the
directory.
Change-Id: Ibcf31904b2ae5edf5639d4c2e5ba234365d347fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Gives more information to user in case of failure. Also, fix the
order of parameters for some QCOMPARE's.
Change-Id: I3ea91f9602d4d32ac79027b6093caea749633c01
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since of Windows (Phone) 8.1 most of the desktop's thread functionality
is also available, so we might be able to share the code and get rid of
the extra implementation for WinRT.
Task-number: QTBUG-43837
Change-Id: I0ce907cd94899834527f88c70e1e395bafdb14b3
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
This reverts commit a6000e2b66.
Temporarily remove this to unblock the qtdeclarative dev CI.
While Windows 8 VMs are fixed by this patch, Windows 7 has different
problems.
Change-Id: I45ef064ed953cc4b7bbf19657300d4fc43d82452
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
ad9698713f reduced the curvethreshold
for wide lines, to fix QTBUG-46151. But as a side effect, the
threshold was increased for lines of widths >=0 and <4. This commit
fixes that, and also adds a lance test for the issue in QTBUG-46151.
Change-Id: I52507db622435fe1d2646640cb0bd9cd8222e453
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Move the code path handling widgets embedded in QGraphicsProxyWidget
into the loop moving up the parent hierarchy.
Add child widget to test.
Task-number: QTBUG-41135
Change-Id: Ibd86413faaa927145a85a2f5864f162979135053
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This isn't specific to an Ubuntu version, unfortunately. It also fails
on OpenSuSE occasionally and other Ubuntu versions.
Change-Id: I6a1ca55a198270f1a1e8a9916e9f768762211550
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When the test fails, show the actual signals spy count.
Change-Id: Id7312bfbfb6531404a9df73234031f13295c80ea
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It's flakey with 'current > 42' sometimes succeeding and sometimes failing.
Change-Id: I86f52b0d0cecd345ed6c5852c822d12eae6acb26
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The failure of this test is not architecture specific but rather
Windows specific. It is failing on either type of Windows machine at random
intervals.
Change-Id: Ie3ab1d868053b22ee5b0d965a8cd6b923985b019
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
All variants of the tests are timing out randomly on all platforms :(
Change-Id: I9244602a8d06fd07d3cc99b2fb8fdf6e07e92cf2
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The Intel compiler defaults to "fast math" mode, which is why those
tests had been failing. So for the test that is trying to check whether
we conform to IEEE strict requirements, turn on strict requirements.
Change-Id: I02f8426b1c8e4241ac10ffff13e8efa224f313b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since Connection can be copied, one copy could be used for
disconnecting, but the other's d_ptr wouldn't get updated and would
continue to report as still connected.
This patch fixes that by making it check the internal state. That is
only done after d_ptr is already known to be non-null. Unfortunately,
that is the common path:
if (connect(sender, &Sender::signal, [] {}))
will call an out-of-line function. I don't see a way out.
Task-number: QTBUG-46213
Change-Id: I66a35ce5f88941f29aa6ffff13dfb45dca68a350
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Global (application-level) event filters are supposed to be run only in
the main thread, so ensure that it is the case.
Change-Id: I27eaacb532114dd188c4ffff13d5a17d991b8bd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
By adding support for the driver description, we can detect if
we are in VMware. In this case D3D9 and 11 get disabled, so only
the software-based options are in use.
This allows running autotests like tst_qopengl, tst_qopenglwidget,
tst_qgl, etc. in the Qt CI system. There OpenGL 2.x is not available,
so ANGLE is the only option. D3D11 is not an option, so it picks D3D9
by default. However, this results in mystic failures. The stable solution
seems to be to use WARP. This can be achieved by setting disable_d3d9 in
the built-in GPU blacklist.
Change-Id: I937c4b3fa82fc1a2d524b4eb712732722df2070c
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
...by moving common code into the Private ctor,
and catering for C++11 move semantics a bit.
Saves ~1.5KiB in text size on Linux GCC 4.9 C++11 release
builds.
Change-Id: I52ed7e47f76b69500a871844c0920e27fe51a127
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's just a test, but it's in the way of automatic tracking
of inefficient QLists.
Change-Id: I2dcfd81c9e208dab57bb256d7c276ad5303f196c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add a cleanup function for the check and disable animations
in tst_qwidgetaction to prevent effect widgets from interfering
(vista style animations).
Change-Id: I043ecb131c8dcd07b6ef10bc75c9e010ab569e85
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Verify the bounding rect of the left hand side of copy/assignment,
not the right hand side (which is passed by const ref).
Change-Id: I5044d269fe0acb5f4484c82da7e030ca33958792
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Addition of new options SSL_KEY, SSL_CERT, SSL_CA, SSL_CAPATH and SSL_CIPHER
to allow SSL-encrypted connections to MySQL databases.
When needed, these options must be specified in the function call
QSqlDatabase::setConnectOptions() before the call to QSqlDatabase::open().
SSL_KEY = the path name to the key file
SSL_CERT = the path name to the certificate file
SSL_CA = the path name to the certificate authority file
SSL_CAPATH = the path name to a directory that contains trusted SSL CA
certificates in PEM format.
SSL_CIPHER = a list of permissible ciphers to use for SSL encryption.
These options replace CLIENT_SSL (which should not be used any more).
Example:
db.setConnectOptions("SSL_KEY=client-key.pem;" \
"SSL_CERT=client-cert.pem;" \
"SSL_CA=server-ca.pem");
[ChangeLog][QtSql] SSL support for MySQL database connections has been added.
Option CLIENT_SSL replaced by SSL_KEY, SSL_CERT, SSL_CA, SSL_CAPATH and
SSL_CIPHER, so that the keys, certificates and cipher can be specified.
Task-number: QtBUG-3500
Change-Id: I8197234b169a818658678d6fcc953c90e83db23e
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
... and enable auto-deletion on it.
This allows users of the function to get rid of their own
cleanup code. They just need to keep the shared pointer alive
for as long as they need it.
Drive-by changes:
- replaced QStringLiterals that were only used as the rhs of op+
- replaced an instance of mid() used as the rhs of op+ with midRef()
- enabled NRVO
Change-Id: I161d39461e020c9e8d473c0810dea2109fe0d62d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This allows for example properties with QMap<Foo, Bar>
[ChangeLog][QtCore] Types in the Q_PROPERTY macro can now contain commas
(for example, QMap<Foo, Bar>)
Change-Id: Ibf5c8c9cf20a7c8b3dfec9e891fb8a9ca1bdba7c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Size policies can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtWidgets][QSizePolicy] Added qHash(QSizePolicy).
Change-Id: Id219f47ac6cb236efdd73cad7b892c8efd034d5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Zero is a legitimate size to be returned by bytesFree/bytesAvailable
functions, so change those functions to return some 'invalid' size
in case of an invalid drive.
This is also consistent with the original version from the Qt Systems
framework.
[ChangeLog][QtCore][QStorageInfo] Fixed sizes returned for invalid drives.
Task-number: QTBUG-45724
Change-Id: I312fba521fdf8d52d7a0ac0e46cacca625775e80
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, QStandardItem::operator<() returned true when both
items had invalid data. With MSVC in debug mode (checked
iterators/STL), this triggered an assert in
tst_QStandardItem::sortChildren() since that verifies
that !(b < a) when a < b:
Debug Assertion Failed!
Line: 3006
Expression: invalid operator<
Introduce a stable sort order for invalid items such that
other items are always less than invalid items and comparing
invalid items returns false (indicating equivalence).
Change-Id: Ica0f0d9f001c86973b1941dbcc1faf282e4c47df
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QSslConfiguration is better suited for these APIs. The ones
in QSslSocket that already have a counterpart have been deprecated.
[ChangeLog][QtNetwork][SSL/TLS Support] Most of the QSslSocket
functions to deal with ciphersuites, certification authorities
as well as elliptic curves have been deprecated in favor of the
corresponding counterparts in QSslConfiguration.
Task-number: QTBUG-46558
Change-Id: I1de03379efcbcab931c20e876e252769fe4279e0
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
When the server could not be reached, the test previously,
produced:
FAIL! : tst_NetworkSelfTest::smbServer() 'smbclient.waitForFinished(5000)' returned FALSE. ()
- Loc: [tst_networkselftest.cpp(992)]
QWARN : tst_NetworkSelfTest::smbServer() QProcess: Destroyed while process ("smbclient") is still running.
Fix this by:
- Using QStandardPaths::findExecutable to locate the binary instead
of test-wise starting it.
- Add a function to ensure process termination.
- Pass a timeout argument to smbclient and pass an interval
depending on it to waitForFinished(), which should prevent
having to kill the process in most cases.
- Add proper error message
Change-Id: I1cbc76ca69aec7d1e0e880685bed54b0ba7f21c7
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Give the link a name containing time stamp and ensure
it is deleted.
Change-Id: I846c58095acbcd92e7daccfd43a69dd97e95e7b0
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, the path was removed from list returned (indicating failure
to remove) only when the thread's list was empty
(last file in directory). Move the statement up so that removal
happens when it is found in thread's list.
Task-number: QTBUG-46449
Change-Id: Ib79199c731f79357b0e5c17636254fbeb3a754a0
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
When trying to do a straight right/left/up/down swipe, a minimal
change in the other direction caused to the gesture to be canceled.
Introduce a threshold for checking such to prevent this.
Task-number: QTBUG-46195
Change-Id: I3e199f2ec0c81d23a16073b1f5b8fff004958239
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Don't hit the scrollbar with the mouse click
Change-Id: Ie82d8c5c058df9a482e7d5de2fe40681572f19ad
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
make sure it'll work with the new mouse handling as well.
Change-Id: Ia2d567e618b77b0fa3532ee6c335cbdf5e496241
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
OS X has an unreasonably low default for the maximum number of open
file descriptors (256). The unit test creates about 200 threads and each
thread in Qt creates at least two file descriptors (pipe), so the test
cannot execute.
Change-Id: I656367bca6d0a40fb1edb8c72914304db0f429ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since we added font matching by style name, the style name is not just
a derived property and should not be ignored in comparisons.
The QFontDef::exactMatch comparison is left unchanged, since it tests
if a loaded font matches a requested one.
Task-number: QTBUG-30851
Change-Id: I4187c5b993815001f35bcf24dc449059bfdcba6f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
When a premultiplied alpha changes value because it is rounded to fewer
bits the premultiplied colors may need to be recalculated with the new
value. Otherwise the color will both be wrong and potentially invalid.
Change-Id: I9ec74a22aac73cd7ffab04e180cf2bf35bb4c315
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
As discussed on the development mailing list, the new overload is ambiguous
and breaks source compatibility. Therefore this function that is new in 5.5
shall be called readLineInto.
Change-Id: I2aecb8441af4edb72f16d0bc6dabf10cdabf32e2
Reviewed-by: Jan Kundrát <jkt@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Implement init() and cleanup() to verify that
no top level widgets are leaked.
- Position widget in tst_QToolTip::task183679() and set
window title.
- Remove hardcoded wait in tst_QToolTip::whatsThis()
and use a find function within QTRY_VERIFY().
- Rearrange and clean code a bit.
Change-Id: I0b1ad88444fc9441c1071a2527f75de1f68ea9e5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
- Use QTRY_COMPARE() in touchBeginWithGraphicsWidget.
- Change raw event translation tests to wait for the
window to become active to avoid WM positioning issues.
- Blacklist the raw event translation tests on Linux.
Task-number: QTBUG-46266
Change-Id: I73aae375ee279a518a2a083d0ce8919cce474cb3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QTextLayout::additionalFormats setters and getters using QList<FormatRange> have
been deprecated; port to the QVector versions.
Moved op== definition for FormatRange needed in tst_qsyntaxhighlighter.cpp
to a friend declaration in FormatRange itself, because MSVC 2008 doesn't find
it otherwise.
Change-Id: Ibab6589df057f02377d895079b56395859e3401e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When invoking a macro with less argument than it expect, we would
crash trying to access the vector of arguments from the invocation
as we are trying to substitute an argument.
(Note that we do not show an error in case of argument mismatch
because ithat might happen parsing valid code as moc's c++ parser
is not 100% accurate (that was QTBUG-29331))
Task-number: QTBUG-46210
Change-Id: I3f08d7f5049e593a5bdc02a594ea63cadf66e7a4
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
The pattern "mySet.intersect(other).isEmpty()" has been spotted in
the wild and in Qt codebase. intersects() is much cheaper because it
bails out as soon as we find one common item and doesn't do any
allocations.
[ChangeLog][QtCore][QSet] Added intersects().
Change-Id: I44a350dc4cdb9deb835a23eee99fc99d6ca24c82
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add CONFIG += testcase to the .pro file which was missing.
The test thus was never executed by make check and left to
rot.
Fix up code:
- Remove module includes.
- Introduce explicit constructors taking parent object
for helper classes, removing calls to setParent().
- Ensure test does not leak objects by converting pointers
to stack variables or introducing QScopedPointer, verify
by checking for an empty window list in cleanup().
- Simplify code by removing unneeded variables.
- Split up conditions in QVERIFY().
Fix tests:
- Show windows were required when events are sent to
QWidget::windowHandle().
- Invert the conditions checking whether touch events are
accepted by widgets since widgets no longer accept them
by defaults in Qt 5 after
e50416066c.
- XFAIL multiPointRawEventTranslationOnTouchPad()
which started to fail at some point in Qt 5.
- Mark as insignificant on OS X due to crash.
Task-number: QTBUG-46266
Change-Id: I6676d021afb015411a24d97d9b8f7c327d4d3c3f
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The positioning test has been observed to fail on X11.
Change-Id: I58727126a8742de93ec203e9992a9ae1b454f731
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
We have at least 5 different (but equal) implementations of a wrapper
in Qt, and some code uses explicit NSAutoreleasePools. Having a shared
implementation lets us clean up things a bit and makes it easier to
reason about which pools are actually needed.
Change-Id: I2fd8eefc3ae7308595ef9899b7820206268362a5
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Two (?) tests can fail: what they actually try to test is that our application
quits on the second single shot timer (2 s. timeout) and not on the first one
(timeout 1 s.) - on the first timeout we either ignore event, or we still have another
window and should not quit yet, on the second timeout we actually do quit the app.
The test checks this in a quite fragile way, counting the number of timeouts for the third 100 ms
timer. It looks like on OS X (VM-only) there is some delay (~500-600 ms) before we receive the
first timeout so the count is always 14 or less, making the test to fail.
Change-Id: I9e8728e6c956025d91528f4195982767a5d3d320
Task-number: QTBUG-46164
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
baselineexample.pro is missing CONFIG += testcase, so,
make check succeeds without doing anything. The test seems
to connect to some network server to retrieve baseline images,
but that infrastructure apparently no longer exists.
Change-Id: I98f4fe5ef8a508fda90e408df2781a944eb99a60
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QTreeViewPrivate::updateScrollBars depends on a correctly set up
viewItems vector. If a delayed layout is pending, we must call
QTreeViewPrivate::executePostedLayout before accessing any stored model
indices.
Task-number: QTBUG-45697
Change-Id: I55fcbaf81f225b26181c2cf739283740b85dd16a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not try to automatically register the meta type for Q_GADGET that
are not default constructible.
This fixes a source incompatibility in the function pointer syntax
of QObject::connect when such types are used as an argument of a signal.
Task-number: QTBUG-45721
Change-Id: I3065f6d57bc1f37e16988d2dee99118de250ca56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Convenience to avoid annoying detaching (instead of using at()),
especially on temporary vectors (returned by functions or so).
[ChangeLog][QtCore][QVector] Added the convenience constFirst
and constLast functions.
Change-Id: If61b1f0096f6a7a1c9074340e237cc2376ce3d18
Task-number: QTBUG-46026
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: Iffc9043654a9dcd97d55e262011c8daff6f4e60f
Task-number: QTBUG-25300
Task-number: QTBUG-45502
Task-number: QTBUG-46325
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
To cover the situation that the process ID got reused, the current
process name is compared to the name of the process that corresponds
to the process ID from the lock file.
If the process names differ, the lock file is considered stale.
[ChangeLog][QtCore][QLockFile] Detection of stale lock files got more
robust and takes the name of the process that belongs to the stored
PID into account.
Task-number: QTBUG-45497
Change-Id: Ic3c0d7e066435451203e77b9b9ce2d70bfb9c570
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Convert vertical wheel events to horizontal for two cases of
the items layout when vertical scrolling is impossible:
1) TopToBottom flow with wrapping
2) LeftToRight flow without wrapping
Do it only for pure vertical events to avoid a mess for such
devices as touchpads or Apple Mouse.
[ChangeLog][QtWidgets][Important Behavior Changes] Allow
horizontal scrolling with a vertical mouse wheel for QListView.
Task-number: QTBUG-37007
Change-Id: Ie2525153fa7b443d27ca08cc5f5d4d7ecdb8c183
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This function was introduced alongside the support for Unix file
descriptors, so it's a good indicator of whether Unix FDs are
supported. Ever since dbus_minimal_p.h, however, DBUS_TYPE_UNIX_FD may
be defined even if the system libs don't support it.
In order to fix this issue, I had to fix what was apparently a merge
conflict resolution mistake and remove the #ifdef around the test. Doing
the latter is a good idea due to moc being unable to find <dbus/dbus.h>.
This was tested with both linked and dynamically-loaded libdbus-1.
Task-number: QTBUG-46199
Change-Id: I66a35ce5f88941f29aa6ffff13dfb4b5438613a3
Reviewed-by: Jani Vähäkangas <jani.vahakangas@theqtcompany.com>
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Otherwise the type is registered with the wrong name
Change-Id: I68ec3a05e2528816626e648b46ccc9d70b004866
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
These changes are required to make event delivery from
test lib synchronous.
Change-Id: I8f7093a2bfe01dfa1b0315620d672e7346a7a23a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Include class name, object name and file name when available.
For the bug in question:
QIODevice::read: device not open
becomes
QIODevice::read (QTcpSocket, "QFtpDTP Passive state socket"): device not open
Adding a static function also makes it easier to set a breakpoint
and find the culprit.
Task-number: QTBUG-46112
Change-Id: Ic181d8ab292912d1acbcc3cb84d9679fe4842ca0
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The test fails on all ubuntu versions, not only 14.04 as far
as I can tell.
Change-Id: I1e204f68bbb791eef25338f0ed007942a2eb22ff
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The resizeColumnsToContents test would fail on some machines, as the
requested 40 pixels where to small to accommodate the header size hint
as well. Raising it to 60 pixels helps make the test pass.
Change-Id: I2a5026fd18425e236849a1cef25ba8d899c7ae5a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This should allow us to make the rest of 14.04 enforcing
Change-Id: I37f6751e8b966b047d1bd2e49ba9482e5846acb1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Otherwise, make check does nothing, always succeeding.
Change-Id: I0fe04697e02ab0f33cd9aebb550777e200c70804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
the functionality is now covered by the qmakelib test.
Change-Id: Id627f573fb247ff3b86558509e27b6a9862c1a59
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the idea was to speed up optimized msvc compilation, but it didn't help.
still, it's better structured that way.
Change-Id: I4b2108d02a47ef8ef704b0b542b0f281bff20165
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
also adds documentation, which is kind of a sanity test. ehm.
Change-Id: I6b520e8b505a2bfbb1e376fa72be0f140227a3a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
freeData() takes a Data*, not a QContiguousCacheData*.
Task-number: QTBUG-45783
Change-Id: I96d7ac38dac24b418138ffff13d7fdf09b1d6b07
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If the internal queue contained multiple events, but the first one did
not select any transitions, the external event queue would be checked
before the remaining events in the internal queue.
Change-Id: I1a7f49afdefaaf2b4330bf13b079b61344385ea0
Task-number: QTBUG-46059
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Standalone files are added by using RESOURCES += file.txt, while
collections of files are defined as collection.files = f1.txt f2.txt
and then added using RESOURCES += collection. For collections a prefix
can also be set using collection.prefix = /foo. The standalone files
are not prefixed.
Change-Id: I8236808238414da05e744f799a1bb15a72f4a46f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QCursor::setPos with Cocoa integration is calling CGEventPost. Some time is required
before the cursor position is really set, so we can not immediately call QCOMPARE.
Change-Id: I83a4c13f06ec151a4b9ab18c83de1eb5247ea9cc
Task-number: QTBUG-45553
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
The test is marked as XPASS in CI. This change follow 201bf9e673.
Change-Id: I0938b1417f792aa88fc1b40c08e7cd810e7d22f7
Task-number: QTBUG-22326
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Prior to this, moc would not generate the function unless the
gadget class had a property or a non-constructor invokable.
Change-Id: Ic020ea5f8f59702f5e9e194a46e26850e53e5cfe
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
An error similar to the one below would be emitted
by the compiler on the moc generated file:
error: assigning to 'QObject *' from incompatible type 'Gadget *'
if (_a[0]) *reinterpret_cast<QObject**>(_a[0]) = _r; } break;
Change-Id: I75ae7bd6c46d20db2d47a80eaa08aae302d7d6c8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test has been initially blacklisted. However it is racy by design
and cannot be fixed. Removing it.
Change-Id: I6c386a12e54d8a382f17c4fc033428f56eb03f02
Task-number: QTBUG-23837
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QMachOParser is defined in the private header that only gets included in
developer-builds. Thus ifdef its usage out, not just the header
inclusion.
Change-Id: I1e0059787be6eb70bd1661c7814e69eee7c5b2ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Make it possible to read images with EXIF orientation automatically
applied. This was originally implemented without opt-out in Qt 5.4, but
reverted. Here it is implemented as opt-in for JPEG, and opt-out for TIFF
to keep behavioral consistency.
The EXIF support for JPEG was written by Rainer Keller.
[ChangeLog][QtGui][Image plugins] An option has been added to
QImageReader to enable automatic application of EXIF orientation.
This behavior was default in Qt 5.4.1, but reverted in Qt 5.4.2.
Task-number: QTBUG-37946
Task-number: QTBUG-43563
Task-number: QTBUG-45552
Task-number: QTBUG-45865
Change-Id: Iaafd2519b63ede66ecc1f8aa4c7118081312b8f5
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
When both scroll bar's policies are set to ScrollBarAsNeeded, make sure
the scroll bars are shown if needed and not show if not. Even the corner
case, where one scroll bar's visibility depends on the other, is handled
properly.
Task-number: QTBUG-45470
Change-Id: I11d6ccf7c0b51644a5ce2d5c3fc59e2e4812755d
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
ItemIsTristate only makes sense in tree widgets, where it triggers the
auto-tristate behavior between parents and children.
Change-Id: Idfa8bb5d0b9c63fe450115fb58d088929e11c7ff
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
My commit 6c973dee2c broke the case where setApplicationName
is called before the QCoreApplication constructor.
Fixed and added autotest.
Task-number: QTBUG-45283
Change-Id: If7bdb0d82be50b50a95a04027f5f9d7143c1a7ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
As usual, user code connected to signals emitted from Qt may destroy
an object's internal status while a signal is being emitted.
Guard a bit QDialogButtonBox signal emissions to prevent
crashes in case the button or a dialog get deleted from a slot
connected to clicked(). Also, be sure to emit the corresponding
accepted/rejected/etc. signal.
Change-Id: I7b1888070a8f2f56aa60923a17f90fb5efef145c
Task-number: QTBUG-45835
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Because if it doesn't, then calling dbus_type_is_fixed or is_basic may
result in a failed assertion.
process 16304: arguments to dbus_type_is_fixed() were incorrect,
assertion "_dbus_type_is_valid (typecode) || typecode ==
DBUS_TYPE_INVALID" failed in file dbus-signature.c line 345.
Change-Id: Idf715b895bac4d56b4afffff13db2ed71b1516a5
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
The test is always marked as XPASS in CI.
Change-Id: I629bdec6f038cd8b6208fc4db61c67a9ea003b2e
Task-number: QTBUG-22326
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
We were fetching "lastText" too late, and setting the opacity
of the clear button to 0.
Change-Id: I82c2aea7dab4af4424fb57e12f78d07a0374457e
Task-number: QTBUG-45518
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
GCC 5 combined with a recent binutils have a new optimization that
allows them to generate copy relocations even in -fPIE code. Clang has
the same functionality when compiling an executable with -flto. We need
to let the compilers know that they cannot use copy relocations, so they
need to use really position-independent code.
Position independent code throughout is not really required. We just
need the compilers to use position-independent access to symbols coming
from the Qt libraries, but there's currently no other way of doing that.
Task-number: QTBUG-45755
Change-Id: I0d4913955e3745b69672ffff13db5df7377398c5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The test keeps failing. The approach of sending mouse move events is
inherently fragile due to the use of QCursor::setPos and the expectation
that that produces the correct sequence of mouse move events.
Change-Id: I07ec75460b70c27152e8775deffcb77fa9328d0c
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
When there are conflicting transitions, a transition that is nested
deeper (i.e. more specific) has priority. If two transitions have the
same nesting level, the one that comes first in the document order gets
priority.
Before this patch, only the document order was considered.
Change-Id: I58f188c270cabe2c386a783ceef7a0a955105425
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
and deprecate isTristate()/setTristate() which isn't specific enough.
This matches the changes to the flags themselves.
Change-Id: I0ba592af340cb81fc9f4d483569844fe8d7510c3
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
This makes the behavior much more clear. You can get a tristate checkbox
just by setting the CheckStateRole to PartiallyChecked, no tristate flag needed.
The flag, on the other hand, enables the automatic-tristate behavior in
QTreeViews (and only there), hence the new name for it.
Change-Id: I18d292a8b8294c863eab806f3874d15dfb72556c
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
QReg*Exp*s can be compared for equality,
so qHash should be overloaded, too.
There was a (poor) private implementation of qHash(QRegExpEngineKey)
already, which has now been replaced with a better one (the old one
didn't take into account all the fields that make up equality,
producing unnecessary collisions).
[ChangeLog][QtCore][QRegExp] Added qHash(QRegExp).
[ChangeLog][QtCore][QRegularExpression] Added qHash(QRegularExpression).
Change-Id: I1d22fbcc0508018a3f94b4c24571b13ba6e07df2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The failing test has been blacklisted in 3ed6f74fb2.
Change-Id: I5a2defd839e2f98690fc8cea9ff18e7503caf0de
Task-number: QTBUG-25294
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is for example useful when looking for a possible BLACKLIST
file while doing a shadow build.
Add autotests for blacklist.
Change-Id: I41d3939d31d21d10187fefcb82604736d911b6ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QGraphicsWidgetPrivate::init had a special code path for setting
the item's parent. For some reason that code path caused the
ItemChildAddedChange notification not to be sent to the parent
element, which is wrong. Instead use the "normal" path, which is
what the QGraphicsItem constructor does anyhow.
Change-Id: Iad84cae05d797022a45977d35ca00c80c17c306a
Task-number: QTBUG-45867
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The behavior of "external" and "internal" transitions is identical,
except in the case of a transition whose source state is a compound
state and whose target(s) is a descendant of the source. In such a case,
an internal transition will not exit and re-enter its source state,
while an external one will.
[ChangeLog][State machine] Added support for internal transitions.
Change-Id: I9efb1e7368ee52aa2544eb84709a00ae3d5350d3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
As nothing changes in the state machine when selecting transitions for
events and then calculating the exit- and entry-sets, some calculations
can be cached.
The exit set for a transition was calculated multiple times. First in
removeConflictingTransitions, where the two loops would each calculate
them multiple times. Then secondly in microstep(), which would calculate
the exit set for all transitions.
Transition selection, exit set calculation, and entry set calculation
all calculate the transition domain and effective target states for
transitions.
Change-Id: I217328a73db2f71e371eb5f60a0c7b222303f0ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Set status code and status text if file was sent with reply.
Change-Id: Ie6acadc5c1d06538449262ffd8486e8de573b931
Task-number: QTBUG-45581
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Pasi Keränen <pasi.keranen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The init()/cleanup() code in tst_qfiledialog and tst_qfiledialog2
currently differs and fails to clean up the settings file
since it only removes the legacy settings under the Qt group
and instantiates a new QFileDialog while the QSettings class
is still in scope. Also, it has no means of clearing the
setLastVisitedDirectory(), which causes the
tst_QFiledialog::completer() and tst_QFiledialog::history() tests
to interfere, leaving the settings in an invalid state.
tst_qfiledialog2 does not use QStandardPaths::setTestModeEnabled(().
- Ensure the last visited URL is always clean by
making QFileDialogPrivate::setLastVisitedDirectory()
static and calling it from init().
- Introduce a cleanupSettingsFile() function to the tests that
cleans both groups and call it from initTestCase() and cleanup()
to ensure a clean state.
- Add QStandardPaths::setTestModeEnabled() to tst_qfiledialog2.
Fixes sporadic test fails when executing
tst_QFiledialog::completer() and tst_QFiledialog::history()
in a sequence.
Task-number: QTBUG-45764
Change-Id: I24de3caabf77be067b385d64ff11b7a07fe12b72
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Completes the inplace converters so that we can rely on inplace
conversions to succede as long as the image depth is the same.
Change-Id: Ia1ae34b5de1bc16e87ff5403bdacfcae44a22791
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Some inplace conversions would not set the requested image format in
the returned image, due to the same conversion being used for several
destination formats.
This patch ensures all inplace conversions return the right format,
and adds testing infrastructure to easily test iterate over all formats
so that they all can be tested.
Change-Id: I68ab17a713ddb2aa8ed6aaf0a0a1ec8bbcb56090
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The one converters from RGB30 was misplaced in the method table, and
the unpremultiplication from A2RGB30 to RGB30 had an underflow mistake
when alpha was 2.
Change-Id: I92c11ede28611a3dbdce72aca1898845c120c209
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Doing a build on OS X without -developer-build fails.
Change-Id: I49c178ab2428177d9dd94f84620595a4bc132244
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Due to a behavior change.
This reverts commit 9157087334.
This reverts commit 16c32c6dfb.
Task-number: QTBUG-37946
Task-number: QTBUG-45552
Task-number: QTBUG-43563
Change-Id: Idf8df7d8f22465e8f6b51acb68993ac97208b184
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Fixed issue that text/uri-list mimedata got from QMimeData::data()
was corrupted after setting it back via QMimeData::setData()
Change-Id: I2377523a9286519402ab9127ed7f3fa66e39a679
Task-number: QTBUG-45486
Reviewed-by: David Faure <david.faure@kdab.com>
Some QImage methods were not preserving image metadata, or only
preserving some of it. This adds the missing parts and adds a test for
metadata.
Change-Id: Ib5892a23e49dfde5ea26074d3deaa887fa930c6b
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I34374ed7269f941c330c65d97fe083c83d3df461
Task-number: QTBUG-33574
Task-number: QTBUG-30943
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The test keeps failing, perfectly when run singly btw. However the approach of
sending mouse move events is inherently fragile due to the use of
QCursor::setPos and the expectation that that produces the correct sequence of
mouse move events.
Change-Id: I12ba1afcfd3fab965b8f93d5def48b435fd2ff33
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Remove the insignificant_test CONFIG option in favor of a BLACKLIST
file. This test has been found failing on OpenSuse in CI.
Change-Id: Ibc6af3c30277fec7e422e8bbeccd9437de2a61ce
Task-number: QTBUG-23837
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QWidget::move() to position floating dock widgets.
Add a test for QMainWindow::restoreDockWidget().
Task-number: QTBUG-45780
Change-Id: I945917728a663916e8c225b9d3d2a75fa508d68f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Currently the cipher preferred by the client will always be used for SSL
connections. This change makes it so that by default the ciphers
specified by the server will be used (like the Apache SSLHonorCipherOrder
option). This behavior can be disabled using a new SslOption.
[ChangeLog][QtNetwork][QSslSocket] QSslSocket will now default to using
the cipher preferences of the server socket when used as an SSL server.
This can be disabled using the QSslConfiguration.
Change-Id: I2d16d10145cf88a7412f30ef960d87024777de1c
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
On OS X 10.10. This test in tst_QComboBox is currently failing in CI.
Change-Id: Ie326f79a900c3ae926c7ebe5bb5880dd422cee60
Task-number: QTBUG-45531
Reviewed-by: David Faure <david.faure@kdab.com>
The tests were trying to access one pixel outside of the image.
Change-Id: Ieabdefbbdb76bb736214a0495bec72c881b27d2c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The QImage inplace mirroring method, failed to handle the middle line
when mirroring both ways (rotate 180). In both other mirroring cases
the middle can be left untouched, but in this case it needs to be
mirrored half way.
To make the logic simpler, double mirroring will now mirror half the
lines instead of half of every line.
Change-Id: Iaa1f1e1c3f7dedfb78891fc93207f6d0c64bcafe
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
For the property to take effect, the button must have its
parent set. This might not be the case when a container like
for example QTabWidget is involved. Move the setting of the
property to the bottom of setupUi.
Task-number: QTBUG-44406
Change-Id: Ic2013865a020986475fa28f2e3805c63d4de8ed0
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Return QLockFile::PermissionError when file does not exist, preventing
the stale file detection logic from triggering.
Add Windows-only autotest trying to create a lock file in
a system folder guarded with checks for elevated processes
and UAC virtualization.
Task-number: QTBUG-45631
Change-Id: I1790f8f925660f6bf1df94c2ced901e6ec57cbb0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Add a special signal spy that records the time and path received
to obtain information on what triggered it for the flaky
cases where more than the expected signals were emitted.
Task-number: QTBUG-30943
Change-Id: I67510ce5e8e19b49c0ca41457f8357b720cade76
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Could causedSSE4 instructions to be used on non SSE4 machines
in cases when qUnpremultiplywas not inlined.
This reverts commit 964ccc5853.
Change-Id: Ic676ade8f75129e8d37c4d96cbfb2bdb5b794919
Task-number: QTBUG-45741
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test tst_QGraphicsIten::sorting is blacklisted but always passing.
Change-Id: I69bbd4b4bbe227267e16ab5558ddabe7d2c0b1b3
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
On OS X 10.10. This test is currently failing in CI.
Change-Id: I1b3a33b404c915e83c5e4fa0a7af69d1b941d93c
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- Make the version regexp a member variable, avoiding repeated
construction.
- Use QVERIFY2() with error message for opening files.
- On failure, try to locate the standard diff tool and produce
diff output for comparison, which should make for example
copyright header changes much easier.
Task-number: QTBUG-44406
Change-Id: Ic759899c1da3394e3eb0cee7b1c722f0945714d3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Dump a stack trace on Linux if the process crashes. This will give us
much better log output in the new CI system. In addition, create a
watch dog thread, that kills the test if the test function times
out (ie. hangs)
Implementations of the stack trace dumping for Mac and Windows
are still pending.
Change-Id: I65426c5afe290a0a2019b881436a0c278f1cafaf
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The test relies on having at least 2 entries, which is not always the
case.
Change-Id: Ief812c598409fe829edb930e563740e5f2213580
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QMatrix and QTransform can be compared for equality,
so qHash should be overloaded, too.
[ChangeLog][QtCore][QMatrix] Added qHash(QMatrix).
[ChangeLog][QtCore][QTransform] Added qHash(QTransform).
Change-Id: I1ce925ebe258c9d7e35b68e5ac5c3373f1460c58
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This patch fixes several upload corruptions if the server closes the connection
while/before we send data into it. They happen inside multiple places in the HTTP
layer and are explained in the comments.
Corruptions are:
* The upload byte device has an in-flight signal with pending upload data, if
it gets reset (because server closes the connection) then the re-send of the
request was sometimes taking this stale in-flight pending upload data.
* Because some signals were DirectConnection and some were QueuedConnection, there
was a chance that a direct signal overtakes a queued signal. The state machine
then sent data down the socket which was buffered there (and sent later) although
it did not match the current state of the state machine when it was actually sent.
* A socket was seen as being able to have requests sent even though it was not
encrypted yet. This relates to the previous corruption where data is stored inside
the socket's buffer and then sent later.
The included auto test produces all fixed corruptions, I detected no regressions
via the other tests.
This code also adds a bit of sanity checking to protect from possible further
problems.
[ChangeLog][QtNetwork] Fix HTTP(s) upload corruption when server closes connection
Change-Id: I54c883925ec897050941498f139c4b523030432e
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
This caused reverse order of session items in qt creator. Introduced
in ba287c55ef.
Change-Id: I5c37ca6a1ef4753b6449eb9e87b4def5ea858677
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QVectors can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QVector] Added qHash(QVector).
Change-Id: I2aacce55d416abf2492631a504a02c6e8fc4ff1c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QUrlQueries can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QUrlQuery] Added qHash(QUrlQuery).
Change-Id: I626258a938359b49a0cae02012b6cba5ef1fe784
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLists can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QList] Added qHash(QList).
Change-Id: I9ad91811f12479764cc17d87192539612ceb0b4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
In order to obey a palette set globally on QApplication, an application
attribute for checking if it's set at all is added.
Task-number: QTBUG-39800
Change-Id: I26b965e6e18e0e1ca4df03cf343b3527df3636b2
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I1a963bdc24f7657731dc0374a8e2c3cbaa49f126
Task-number: QTBUG-22775
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Merges the SSE4 specific unpremultiply with the normal version, and
adds a SSE2 fallback. There was no reason to split the two since
compile time options will ensure the right version is inlined.
Also adds short-cut for 0 and 255 values.
Change-Id: Ie5aa262f6964219fd3062d4a498f697cf79a4595
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will be essential on Linux, especially Embedded where PCI IDs are
not that useful.
Change-Id: I2fa8ca07236e8aae203e21fe629d12aab092c7fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Currently pressed touch point is added to the list of active touch
points in Gui module. It must be excluded from consideration when
we traverse the list.
Task-number: QTBUG-43255
Change-Id: Idddab093b1f6a79122cf18fad7f43bfc93ce7eea
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtCore][QLockFile] Fixed a deadlock when the lock file
is corrupted.
Task-number: QTBUG-44771
Change-Id: Ic490b09d70ff1cc1733b64949889a73720b2d0f3
Reviewed-by: David Faure <david.faure@kdab.com>
Adds the last two missing source types to rgb64 rendering.
Conical and radial gradients. At the same time linear
gradients are moved to a template form to increase code
sharing.
Change-Id: I30fdd0837b0da03e3447683856ebbe4d7f48df6c
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Cleaning up smoothscale code. Upscaling is improved using existing
optimized interpolation methods, and downscale is given SSE4.1
optimized versions.
Change-Id: I7cdc256c26850948aef7dae26fda1622be6b8179
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Some tests were failing because the color was not read correctly from
a QImage. To make it possibly to read more accurate colors a pixel
accessor returing QColor has been added.
Some tests also had the wrong order of arguments, confusing dest and src
formats. This has been corrected, so they test what they claim to test.
A test for RGB30 linear gradients is also added.
Change-Id: Ic623ae1b8e0bf7383056b641c6e8230a1d7dd0dd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.
The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.
Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm
[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.
Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This patch updates the internal color precisions of solids and
gradients to 16bit per color. This makes it possible to render
at higher precision on non-premultiplied ARGB32, the RGB30
formats and any other hi-color formats if more are added.
[ChangeLog][QtGui][Painting] Internal precision of solids and gradients
is now up to 16bit per color.
Change-Id: Ieae5468bd6de1f56adfa4cb9fa966faf2ed824fd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
We have configure -headersclean now
Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Add an ordinary peek() function which also allows retrieving data from
a specified position. We need this functionality in several places.
Change-Id: Ia4a1b6fe1d7f76cb8f6f1ea34b3e4b89e05a2a68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSaveFile is intended to be a replacement for QFile, and should use the
same permissions for newly created files. QTemporaryFile however creates
new files with 0600 mask by default.
Fix this by making the mode_t argument QTemporaryFileEngine uses
configurable, and using 0666 for QSaveFile (like we do in QFile).
[ChangeLog][Important behavior changes] Files created by QSaveFile do
now have the same rights as files created by QFile. This also fixes a
regression in QSettings: In the Qt 5.4 series, new files created by
QSettings were only readable by the current user.
Task-number: QTBUG-44086
Change-Id: Ie1cc20e9f25c6e72e1bc9176490c419c27c5fc82
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
...which constructs a quaternion using specified forward and upward
directions, so that the resulting Z axis "faces" a given forward direction.
Change-Id: Ib77b8ab5c359a4880b0d946face87026acdc6f0b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Michael Krasnyk <michael.krasnyk@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
std::vector has them, too.
[ChangeLog][QtCore][QVarLengthArray] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: I69e16d361fd4738a56b292ebfa78316d28871eda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::vector has them, too.
[ChangeLog][QtCore][QList] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: Id2bd905e92c0365ad9f439d49908045c8df309c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
