Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
protocolServerSide test fails with 'ssl3-any' and 'tls1.0-any' combo
on RHEL 7.2 with OpenSSL v1.0.1e-fips, it would work as OPENSSL_NO_SSL2
code-path, but OPENSSL_NO_SSL2 is not defined, so socket is in state
connected while it's expected to be unconnected.
Task-number: QTBUG-53608
Change-Id: Ib321b95129a6ab5b0691b40cb4acc612125633b2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
setEmptyDefaultConfiguration - this test (and this was stated explicitly
in comments!) must be the last test to run, otherwise, it can make subsequent
tests fail.
-exitLoop must be in 'protected slots' section not to be executed as a test,
since ... it's aux function, not a test.
Task-number: QTBUG-53608
Task-number: QTBUG-53603
Change-Id: I49d6d57ba927ecc4f20ae2d9325ad02fa46b0922
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Only the OpenSSL backend is supported right now.
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
set custom Diffie-Hellman parameters for QSslSocket-based servers.
Change-Id: I50148873132cd0ec7e414250b107b6b4cbde02ea
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
A recent fix now makes
authenticationCacheAfterCancel(http+socksauth)
work again, so un-blacklist it.
Added a helpful comment while I was at it.
Change-Id: I2d7eae8d80c12957d22659a82e5072301735c41f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This reverts commit 11ad50074b.
Unfortunately, udpsocket strikes back this time on OS X < 10.10 -
never seens these test failing before. Since this prevents 5.6->5.7
merge, I have to revert it until the problem investigated/fixed on OS X.
Alas :(
Change-Id: I52f6512d88c25d2e3071cb845e91faefbd455e27
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtNetwork][QAuthenticator] Fixed crash when
comparing a initialized QAuthenticator with an uninitialized
QAuthenticator.
Task-number: QTBUG-53338
Change-Id: Ib8b732b9c65c02ee542885e5d6fe9bd1589a6b1a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
BLACKLIST should make it, recent regression in QUdpSocket went unnoticed
(first) because of 'insignificant'. We'd like to avoid such regressions
in future (again, using BLACKLIST if needed and fixig the real problem then).
NB: BLACKLIST in this patch was extended to deal with previously unnoticed failures on
Windows and OS X. 'multicast' and related family of of functions on OS X
will probably stay like this (seems to be a Darwin's quirk), datagram
size related tests - fixed in dev or 5.7 (change is in nativesocket engine,
'bytesAvailable').
Task-number: QTBUG-52714
Change-Id: I039b05935a02983ce1648de449907dfa765f7db7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
[ChangeLog][QtNetwork][QSslSocket] TLS PSK ciphers are possible in server sockets.
Task-number: QTBUG-39077
Change-Id: Iaa854a6f50242deae5492f2e4759c727488995f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
QWindowsPipeWriter uses asynchronous API to perform writing. Once a cycle
has been started, the write buffer must remain valid until the write
operation is completed.
To avoid data corruption and possibly undefined behavior, this patch
makes QWindowsPipeWriter::write() take a QByteArray, which it keeps alive
for the duration of the write cycle.
Autotest-by: Thomas Hartmann
Task-number: QTBUG-52401
Change-Id: Ia35faee735c4e684267daa1f6bd689512b670cd2
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Add a named comparison method that allows the caller to
specify in how far a translation between IPv4 and IPv6 should be
performed before comparing.
Change-Id: I9aeffcd4539a6c0537c083c4553357b22167df3f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Suppress message dialog of the test helper as does QTestlib.
Task-number: QTBUG-52714
Change-Id: I5efd7d72f77c7689500ecaccf46f1f9dfb312140
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Blacklisting those autotests that prevent us to get RHEL 7.2 in the CI.
The same tests have already been blacklisted for RHEL 7.1.
Change-Id: I2aa62647f7bd75681ea9e1d69bc62f9542fda5e2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Follow-up to commit 6fd205d5: document which version of danted shall
make one work-around redundant, document that another work-around is
still needed even with that v1.1.19; and remove a comment that
referred back to an XFAIL that commit 6fd205d5 removed.
Change-Id: I270b662528127c82184bff20b3cecea4f0c41b41
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QSKIP() causes the whole test to be skipped, where this work-around
for a known quirk of the test server only requires skipping a single
Q_COMPARE(); the rest of the test passes fine without it.
Change-Id: Ie4612bd428f4cb4b342fad908cc2784fbadf069c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Use QFINDTESTDATA to find the socketprocess helper executable.
Now tst_QLocalSocket::processConnection() passes when started from Qt
Creator without adjusting the working directory.
Change-Id: I97ca3334a381b3cd646647487529bcd90b969528
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I0c94a5c2846b48c8aea7ffff1435b8a7ccbd4d9e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
According to RFC 2640, FTP uses UTF-8 encoding. Fix the conversions
accordingly.
Task-number: QTBUG-52303
Change-Id: I615199b3d074fc3861f25df113dda672525766b6
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
examples and tests.
Task-number: QTBUG-51673
Change-Id: I3706336395620522ceda414d7437295d9ec64f16
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QWindowsPipeWriter doesn't write in a separate thread
anymore.
Change-Id: Id978bfdfa2531be91cce94476ab9b0dff237bd61
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Commit 0307c008 removed the buffering of data-to-be-written from
QWindowsPipeWriter, because it was assumed that users of this class
(QProcess and QLocalSocket) already buffer data internally.
This assumption was wrong for QLocalSocket. The following sequence
localSocket->write(someData);
localSocket->write(someMoreData);
would not write anything on the second write.
Add a write buffer to the Windows implementation of QLocalSocket.
Task-number: QTBUG-52073
Change-Id: I6d0f03a722ec48138cbde3e2f69aae7dafe790d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Application-Layer Protocol Negotiation (ALPN) - is a reworked revision
of Next Protocol Negotiation (NPN) we have in our OpenSSL code.
Can be used as a part of HTTP2 negotiation during TLS handshake.
Change-Id: I484ec528c81d4887a64749095ec292dfaec18330
Reviewed-by: Richard J. Moore <rich@kde.org>
canReadNotification() could return 'false' if either the socket has
been closed, or the read buffer has reached the maximum size. Because of
this duality, waitForBytesWritten() should not fail as a result of a
canReadNotification() call.
Change-Id: I9a15fa174a3b982a7ce404913caa38fc19f64622
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
Suppose a client connects while the QLocalServer is still in the loop
that calls addListener. The connection would SetEvent(eventHandle),
but every call to ConnectNamedPipe would ResetEvent(eventHandle).
Thus, the connection is never detected by the notifier on eventHandle.
Callers of addListener must check the connection state of every
listener to make sure that no client connected while setting up
listeners.
Task-number: QTBUG-49254
Change-Id: Ia961927ea76973708e6e3f73510695eb5d6a0e4c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In one code path the test checked for the emission of a readyRead()
signal without waiting for it.
This code path was never hit, neither on Windows nor on Unix platforms.
Change-Id: Ifbe464400a2a1ba8eab49bd60315289040e6bbde
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some embedded servers use LF to mark the end of an individual header,
but use CRLF to mark the end of all the headers. The GoPro WiFi
interface does this, as an example.
Change-Id: I227ab73622c84f439a6cf8703d020393c4d8bf69
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
This change adds support for BackgroundRequestAttribute to local file request. It is useful
when opening files located in network drives where the file open operation could take several
seconds to complete. When this attribute is activated the QNetworkAccessManager::get call
returns the reply immediately and the user has to wait until QNetworkReply::finished signal
is emitted or QNetworkReply::isFinished function returns true.
Task-number: QTBUG-45925
Change-Id: Ie2019dd94fe04253d1ef6874811d7e749a5aad93
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
QTcpServer::addPendingConnection() is protected, so it is possible to
add pending connections from a class derived from QTcpServer. This
derived class can get a QTcpSocket from somewhere else, in which case
d->socketEngine will not be set (or used). Given that it is possible to
add pending connections in this scenario, it would make sense to be able
to retrieve them as well.
[ChangeLog][QtNetwork][QTcpServer] Permit using a QTcpServer with
externally created QTcpSocket.
Task-number: QTBUG-51288
Change-Id: I830c10f1a881e2bca4e4ad716d8be865e1c27a9f
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The data function for this test re-used listenAndConnect_data that
has an additional column "connections" which was never used in sendData.
Thus sendData executed three times the same code which is just uselessly
burned CI time.
Copied the actually needed code of listenAndConnect_data to sendData_data.
Change-Id: I6cdb1c1b72cb4ce7be7c13e90eea30ac09a14914
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Remove several test from black-list - they do not seem to fail anymore.
Change-Id: Idb7d6925a4fdea9b47d963e33a455af0afb7b432
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
I wrote a script to help find the files, but I reviewed the
contributions manually to be sure I wasn't claiming copyright for search
& replace, adding Q_DECL_NOTHROW or adding "We mean it" headers.
Change-Id: I7a9e11d7b64a4cc78e24ffff142b506368fc8842
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
It's possible to configure an interface so that it isn't the case. I have
no idea if this is a valid scenario, but the unit test shouldn't enforce
that.
ip addr can report:
inet 192.168.1.1/32 brd 192.168.1.255 scope global vlan0
valid_lft forever preferred_lft forever
Change-Id: I8de47ed6c7be4847b99bffff141c337575760bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
When the remote peer closed the connection, a read notification needs
to always be emitted, otherwise the higher layer does not get the
disconnected signal. From the other side, underlying QAbstractSocket
object could temporarily disable notifications from the engine at
any time. To avoid possible blocking of the socket, take a pending EOF
into account when the read notifications are re-enabled.
Change-Id: Iac9d4e2f790530be3500baf5a2000f1f63df5cc2
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
That API has been available for WinRT and Windows
Phone for some time now. By using it to get the
machine name and for hostname resolution we can get
rid of some winrt-only code and use qhostinfo_win.cpp
on WinRT and Windows phone as well.
Additionally the required capability was added to
tst_qhostinfo so that this auto test can be run without
any manual editing.
Change-Id: I63fa5521bf8cdb0c919bd5a0100ea977c865622a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
When using cipher algorithms with forward secrecy an ephemeral key is
used to generate the symmetric session key. Beside the SSL certificate's
key, this ephemeral key is of cryptographic interest.
The ephemeral key is chosen by the server side - currently statically in
the Qt implementation - so it is only of interest on the client side to
check it. Therefore the ephemeral key is the null key if the connection
is set up in server mode or a cipher without forward secrecy is used.
Change-Id: If241247dbb8490a91233ae47f2b38952c6591bf4
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Commit 64a1448d87 (Qt 5.2) caused
QNetworkInterface to report address labels (a.k.a. interface aliases) as
separate interfaces. This is caused by the fact that glibc, uClibc and
MUSL copy the address label (netlink address attribute IFA_LABEL) to the
ifa_name field, which made QNetworkInterfaceManager think that it was an
interface it hadn't yet seen.
Address labels are the old way to add more than one IP address to an
interface on Linux, for example:
ifconfig eth0:1 192.0.2.2
Those do not create a new interface, so the "eth0:1" label maps to the
same interface index as the parent interface. This has been deprecated
for 10 years, but there are still tools out there that add addresses in
this manner.
This commit restores behavior compatibility with Qt 4.2-5.1. The Qt
5.2-5.5 behavior is incorrect because it reports more than one interface
with the same index. On systems configured like the above, the
tst_QNetworkInterface::interfaceFromXXX test was failing.
Change-Id: I8de47ed6c7be4847b99bffff141c2d9de8cf7329
Reviewed-by: Richard J. Moore <rich@kde.org>
Introduce QVERIFY2() to get some information when exactly it fails.
Change-Id: Icaddf2ecae434d0bafc90c18458c5ee067dfd506
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Move the code from cleanup() into a separate cleanupTestData()
and call this from initTestData() and cleanup(). Remove slot init().
Change-Id: I4e7b5b89197ed0aa50f46f730e9c1d9c59749614
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
(cherry picked from commit 0df5d07929)
Task-number: QTBUG-48326
Change-Id: I67d9ad36f7288c9c6bef51aa6253d7b187737601
Reviewed-by: Ulf Hermann <ulf.hermann@theqtcompany.com>
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
On some platforms our 1200 x 1000 bytes seems to be not enough to
fill kernel buffers (socket write). But it's not a reason to fail test,
just skip it.
Task-number:QTBUG-49205
Change-Id: I13ea6f315f9318288ba054cf8bfa6cdd61e489d2
Reviewed-by: Richard J. Moore <rich@kde.org>
After canceling the asynchronous read operation, the
notified() slot receives ERROR_OPERATION_ABORTED.
We must not handle this situation as an error.
This amends commit 5ce567c5.
Task-number: QTBUG-48336
Change-Id: Iff948ceb3ad1f805a9de8c188fbc39ed4c76ba82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Different multicast tests fail on different platforms for different reasons.
Blacklist them to get rid of insignificant and later fix/un-blacklist.
Change-Id: I91548366c7666478ea1cc446bbf337becfdefd49
Task-number: QTBUG-46612
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Some of the examples make no sense without bearer management and
QNetworkSession is not defined if QT_NO_BEARERMANAGEMENT, so
tst_qnetworkreply.cpp has to be adjusted.
Change-Id: Ic2f73746cba74f670ae5b5e99b0be1461ff6d182
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I7974ace5b34f2da43e7511044e80de1e733245ac
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
These are for faster lookups between ID and name when one doesn't need
the full information set about the interface.
Change-Id: I7de033f80b0e4431b7f1ffff13f98d448a705c3e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
A QAbstractSocket can be close()'d at any time, independently of its
current connection state. being closed means that we cannot use it to
read or write data, but internally it might still have some data to
send or receive, for example to an http server. We can even get a
connected() signal after close()'ing the socket.
We need to catch this condition and mark any pending data not yet
written to the socket for resending.
Task-number: QTBUG-48326
Change-Id: I6f61c35f2c567f2a138f8cfe9ade7fd1ec039be6
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After calling connectToHost(), the socket enters HostLookup state. At this
stage, the socket engine was not created yet, and writing to the socket
should result in either data buffering or an error. So, add a check for
d->socketEngine to prevent a crash on unbuffered sockets.
Task-number: QTBUG-48356
Change-Id: I15ea9ce7de97ce6d7e13e358eca5350745b556bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Use QVERIFY2() with QTemporaryDir/File::errorString() consistently.
Attempt to catch issues like the below warning and follow-up issues.
QSYSTEM: tst_QFiledialog::clearLineEdit() QFileSystemWatcher: FindNextChangeNotification failed for "C:\Users\qt\_____aaaaaaaaaaaaaaaaaaaaaa" (Access is denied.)
Task-number: QTBUG-47370
Change-Id: I58a6e87c502627e976efa62ad73c912f3b2d49fa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
There was a small amount of time between the last readDatagram() call
and disabling a read notifier in case the socket had a pending
datagram. If a new datagram arrived in this period, this qualified as
absence of a datagram reader. Do not change the read notifier state
because it is disabled on canReadNotification() entry and always enabled
by the datagram reader.
Thanks to Peter Seiderer, who investigated the same: "Querying
hasPendingDatagrams() for enabling/disabling setReadNotificationEnabled()
is racy (a new datagram could arrive after readDatagam() is called and
before hasPendingDatagrams() is checked). But for unbuffered sockets the
ReadNotification is already disabled before the readReady signal is
emitted and should be re-enabled when calling read() or readDatagram()
from the user."
However, this patch does not completely solve the problem under Windows,
as the socket notifier may emit spurious notifications.
Task-number: QTBUG-46552
Change-Id: If7295d53ae2c788c39e86303502f38135c4d6180
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A buffered TCP socket might be open only for writing purpose. As a
possible use case of the API, this patch avoids accumulation of
unwanted data in the internal read buffer.
Change-Id: I2759c1e04968d24e2ae71f3eca05e7e560cd8a41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This commit changes the readDatagram() and writeDatagram() virtual
functions to take a QIpPacketHeader as meta data, instead of a
QHostAddress/quint16 pair. As previously, the header is an "out"
parameter for readDatagram() and an "in" parameter for writeDatagram().
The header pointer in readDatagram() is allowed to be null if the
PacketHeaderOptions indicates WantNone. Otherwise, it must not be null.
The extra options parameter is introduced because we may not always want
all the metadata upon reception. For sending, we know what to include or
not based on what's set in the incoming header parameter.
QIpPacketHeader splits sender and destination because we'll be able to
return both on datagram reception.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4213255008c7
Reviewed-by: Richard J. Moore <rich@kde.org>
This test fails on OS X: we first fill sockets' kernel buffers and then
we tryto write a 'residue', waiting in 'select' for 2 seconds.
It looks like on OS X (at least, 10.10) 2 seconds are not enough - we always have a timeout.
Wait ... 4 seconds.
Change-Id: Id679dccda10b8f7859b8dfa6456b91ec13d52f68
Reviewed-by: Richard J. Moore <rich@kde.org>
Mostly related to IPv6, because Q_IPV6ADDR is an array of char, so the
compilers were generating byte access to each value. Instead, force
access as 32- and 64-bit in most places that make sense (64-bit access
decays to 32-bit on 32-bit machines). In one isLoopback(), this is now a
128-bit access for best improvement.
Some smaller improvements relating to SpecialAddress by combining the
three IPv4 special addresses.
Change-Id: I7de033f80b0e4431b7f1ffff13f932b1cd7b5d21
Reviewed-by: Richard J. Moore <rich@kde.org>
This complements QHostAddress::isLoopback. The only missing check now is
for the "Any" address types, though operator== is quite fast nowadays.
Change-Id: Iee8cbc07c4434ce9b560ffff13cc2691e15014b6
Reviewed-by: Richard J. Moore <rich@kde.org>
The test is very flakey in 5.5 integrations and the OS X CI machines have
notorious problems with networking stability. So the previously listed tests
are not really at fault, it's an infrastructure problem, that we choose to
ignore for the time being.
Change-Id: I7fbfa7b3778daa6b5e60d95b822847c92927122f
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
SecureTransport does not implement QSslCertificatePrivate thus some
tests relying on generic version fail. Skip them for now.
Change-Id: I483340b37786a8a556e954b2c538e4f48a342be9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
A couple of test always fail on OS X/iOS with SecureTransport
(simply not implemented yet).
Change-Id: Idd82262512938c36b657b497751738fdc804c182
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
Also removed the XFAIL from connectToUnresponsiveHost
Change-Id: Ie0f5685a8fa437c00d22f9e76b51ac61347ce03b
Task-number: QTBUG-15111
Reviewed-by: Caroline Chao <caroline.chao@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Non-OpenSSL backends are not able to report a specific error code
for self-signed certificates.
Change-Id: I56bf130335b2afa65cf2bd5248a40ac0e32f74c2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
I'm getting an error with WSARecvFrom in nativeBytesAvailable() and I
don't know why. The number of bytes obtained is correct and the test
works for 2 bytes, so let's use that.
The Windows nativeBytesAvailable() function has a comment saying that
WSAIoctl sometimes indicates 1 byte available when there's a pending
error notification, so that function proceeds to do a WSARecvFrom to
peek the number of bytes. Somehow that function in this test is getting
a SOCKET_ERROR I can't explain.
Change-Id: Ic5b19e556e572a72a9df9a405b1fee3b7efb8b24
Reviewed-by: Richard J. Moore <rich@kde.org>
The test is crashing regularly (see bugreport).
Currently the test is not run in the regular CI system, that is why
the failures were not noticed.
Task-number: QTBUG-47128
Change-Id: I70d4ada0872316cc63d7629bb9ab2d055d70cf2a
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This is a fix-up for cff39fba10.
That patch lead to some internal state issues that lead to the QTBUG-47048
or to QNetworkReply objects erroring with "Connection Closed" when
the server closed the Keep-Alive connection.
This patch changes the QNAM socket slot connections to be DirectConnection.
We don't close the socket anymore in slots where it is anyway in a closed state
afterwards. This prevents event/stack recursions.
We also flush QSslSocket/QTcpSocket receive buffers when receiving a disconnect
so that the developer always gets the full decrypted data from the buffers.
[ChangeLog][QtNetwork] Fix HTTP issues with "Unknown Error" and "Connection Closed"
[ChangeLog][QtNetwork][Sockets] Read OS/encrypted read buffers when connection
closed by server.
Change-Id: Ib4d6a2d0d988317e3a5356f36e8dbcee4590beed
Task-number: QTBUG-47048
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QSslConfiguration is better suited for these APIs. The ones
in QSslSocket that already have a counterpart have been deprecated.
[ChangeLog][QtNetwork][SSL/TLS Support] Most of the QSslSocket
functions to deal with ciphersuites, certification authorities
as well as elliptic curves have been deprecated in favor of the
corresponding counterparts in QSslConfiguration.
Task-number: QTBUG-46558
Change-Id: I1de03379efcbcab931c20e876e252769fe4279e0
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Include class name, object name and file name when available.
For the bug in question:
QIODevice::read: device not open
becomes
QIODevice::read (QTcpSocket, "QFtpDTP Passive state socket"): device not open
Adding a static function also makes it easier to set a breakpoint
and find the culprit.
Task-number: QTBUG-46112
Change-Id: Ic181d8ab292912d1acbcc3cb84d9679fe4842ca0
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This test has been initially blacklisted. However it is racy by design
and cannot be fixed. Removing it.
Change-Id: I6c386a12e54d8a382f17c4fc033428f56eb03f02
Task-number: QTBUG-23837
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Set status code and status text if file was sent with reply.
Change-Id: Ie6acadc5c1d06538449262ffd8486e8de573b931
Task-number: QTBUG-45581
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Pasi Keränen <pasi.keranen@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove the insignificant_test CONFIG option in favor of a BLACKLIST
file. This test has been found failing on OpenSuse in CI.
Change-Id: Ibc6af3c30277fec7e422e8bbeccd9437de2a61ce
Task-number: QTBUG-23837
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Currently the cipher preferred by the client will always be used for SSL
connections. This change makes it so that by default the ciphers
specified by the server will be used (like the Apache SSLHonorCipherOrder
option). This behavior can be disabled using a new SslOption.
[ChangeLog][QtNetwork][QSslSocket] QSslSocket will now default to using
the cipher preferences of the server socket when used as an SSL server.
This can be disabled using the QSslConfiguration.
Change-Id: I2d16d10145cf88a7412f30ef960d87024777de1c
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
This patch fixes several upload corruptions if the server closes the connection
while/before we send data into it. They happen inside multiple places in the HTTP
layer and are explained in the comments.
Corruptions are:
* The upload byte device has an in-flight signal with pending upload data, if
it gets reset (because server closes the connection) then the re-send of the
request was sometimes taking this stale in-flight pending upload data.
* Because some signals were DirectConnection and some were QueuedConnection, there
was a chance that a direct signal overtakes a queued signal. The state machine
then sent data down the socket which was buffered there (and sent later) although
it did not match the current state of the state machine when it was actually sent.
* A socket was seen as being able to have requests sent even though it was not
encrypted yet. This relates to the previous corruption where data is stored inside
the socket's buffer and then sent later.
The included auto test produces all fixed corruptions, I detected no regressions
via the other tests.
This code also adds a bit of sanity checking to protect from possible further
problems.
[ChangeLog][QtNetwork] Fix HTTP(s) upload corruption when server closes connection
Change-Id: I54c883925ec897050941498f139c4b523030432e
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
Instead of making insignificant the all platform for
QtBase 5.5 integration.
Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
When in commit db15341d27 I added support
for testing TXT, I used the space character to make it easy to
concatenate the records. Unfortunately, that means it's easy to false-
positive the test by creating one record with a single entry containing
a space instead of two entries.
So use the NULL character instead.
Change-Id: Ia0aac2f09e9245339951ffff13c7d239ea83583d
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Richard J. Moore <rich@kde.org>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Other parts of tst_qudpsocket.cpp already did this check.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca545a03c9596a
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit adds support for following HTTP redirect responses on a per
request basis.
This behavior is disabled by default. It can be switched on by
setting the QNetworkRequest::FollowRedirectAttribute to true.
2 new error codes have been added to QNetworkReply:
* TooManyRedirectsError: Set when the number of redirects exceed a
given value set by the user (defaults to 50 if not set)
* UnsecureRedirectError: Set when we are redirecting from a 'https'
to 'http' protocol.
Test cases for the following scenarios:
* Single HTTP redirect using local test server
* Changing max-redirects
* Testing all redirect related error scenarios
The next commit will extend this feature at a QNAM level.
Task-number: QTBUG-8232
Change-Id: If9e28ad12bad08bcdc5bc511b1cd59dc9d8150f0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
This allows one to check whether the conversion is successful without
checking for the return result, as the value of 0 represents the valid
IPv4 address 0.0.0.0.
Change-Id: I637fe55583f2255c85b0d955e5886b61494e0c7c
Reviewed-by: Richard J. Moore <rich@kde.org>
In 85136496bc, Shane made QHostAddress
automatically convert any IPv6 address that was v4-mapped to IPv4 in
QHostAddress. While that is an interesting trick, it prevents us from
being specific about what we want. On some OS (like FreeBSD and OS X),
the distinction is relevant, so keep it.
Moreover, it was inconsistent: it might fail depending on how the
QHostAddress was constructed and the order of comparison.
[ChangeLog][Important Behavior Changes] QHostAddress will no longer
convert IPv6 addresses of type "v4-mapped" to IPv4. To perform this
conversion manually, construct another QHostAddress with the result of
toIPv4Address().
Change-Id: I06afbc7018539804bb3044ef1fe6a49ac7a5f240
Reviewed-by: Richard J. Moore <rich@kde.org>
This commit updates the NS records and disables the lookup for
ptr-single.test.qt-project.org, as the new provider does not support
adding PTR records outside of the in-addr.arpa zone.
This commit reverts f9c70128bb, which was
a reversal of 24c52bd44b.
Change-Id: Ia0aac2f09e9245339951ffff13c7cab530a41515
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This has been known to be broken for a while. Now it works: you can bind
and you'll retain the port (and the file descriptor) for the connect
call. Incidentally, in fixing the binding for more than one IP for the
hostname (with event loop), this commit fixes the setSocketDescriptor
XFAIL.
[ChangeLog][QtNetwork] Fixed a bug that caused both QTcpSocket and
QUdpSocket to close the socket and lose any bound ports before
connecting. Now bind()/setSocketDescriptor() followed by connect() will
retain the original file descriptor.
Task-number: QTBUG-26538
Change-Id: I691caed7e8fd16a9cf687b5995afbf3006bf453a
Reviewed-by: Richard J. Moore <rich@kde.org>
www.example.com is a reserved domain (RFC 6761), but IANA is running a
web server there. As for www.foo.com, that also exists, is a real
website and is often content-filtered in corporations (it triggers a
firewall warning for me -- "You attempted to visit a site that is in
violation of Intel acceptable use guidelines").
So use a localhost instead, since we don't actually need to connect to
the servers to do the work. And since we don't need to connect, I chose
port 4 as it's extremely unlikely someone is running an HTTP server
there (/etc/services lists it as unassigned).
Change-Id: Ia0aac2f09e9245339951ffff13c82439c6d5f945
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This reverts commit 24c52bd44b and makes
the Qt unit tests requiring DNS zones to use the temporary test zone in
macieira.org (Thiago's domain).
Change-Id: Ia0aac2f09e9245339951ffff13c6d3752c83b773
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Actually, it tests the buffered QTcpSocket. Place it in
tst_qtcpsocket.cpp instead of tst_qabstractsocket.cpp.
Change-Id: I3055c4773d0de74c238be4f11b2d1c07ddad4485
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Secure Transport relies on keychains, both client/server are constantly
updating default keychain and as a result tests are failing: when
verification is expected to fail, it succeeds; when the number of certificates
is expected to be 1 - it's 2 (Secure Transport can find certificates in a keychain).
This makes verifyClientCertificate test quite useless at the moment - QSKIP it.
Change-Id: I578398b4912a86dc60f585ac5a1bdd0098914005
Reviewed-by: Richard J. Moore <rich@kde.org>
There are more than 1000 new entries since the table has been
generated the last time.
Some auto tests needed to be adjusted, because some entries in
the TLD table were removed while others were added.
Change-Id: I4ceec392836d2031dfef49a0c5a857c31b36bb4c
Reviewed-by: Richard J. Moore <rich@kde.org>
QAbstractSocket::close() always calls QIODevice::close(), which resets
QIODevice's internal read buffer. So it makes no sense to make same calls
from disconnectFromHost(). This made the closeCalled private member
superfluous.
Change-Id: I4ec64e9711490e44e737763e4ed7fb41bffe2556
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
This adds tests to check the behavior of a QSslSocket-based server when
presented with various client certificates.
Change-Id: I431157e46cfb00880ae8b7a33015cce50e56b6bb
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Move these types to QAsn1Element so that they can use the toString()
method which guards against malicious ASN.1.
Change-Id: I7d6155147a6fc2d41da6f3ae87551b6cb75aa9ce
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
We don't currently use this class for critical things like hostname
verification however we still want to ensure that it is not possible
to trick it using ASN.1 strings with embedded NUL characters. This will
avoid problems in the future.
Change-Id: Ibf3bc142a94fc9cad5f06db50f375399a087f9dc
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Add support for SSL on iOS/OS X by adding a SecureTransport based
backend.
[ChangeLog][QtNetwork][QSslSocket] A new SSL backend for iOS and OS X,
implemented with Apple's Secure Transport (Security Framework).
Change-Id: I7466db471be2a8a2170f9af9d6ad4c7b6425738b
Reviewed-by: Richard J. Moore <rich@kde.org>
Mainly because of a change in certificates which is causing failing
tests.
Change-Id: I8304e5ac4107428a250b71be5df7b5399a811017
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Mainly because of a change in certificates which is causing failing
tests. This patch is cherry-picked from
https://codereview.qt-project.org/104619/
Change-Id: I8304e5ac4107428a250b71be5df7b5399a811017
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtNetwork][QSslSocket] It is now possible to use TLS PSK
ciphersuites in client sockets.
Task-number: QTBUG-39077
Change-Id: I5523a2be33d46230c6f4106c322fab8a5afa37b4
Reviewed-by: Richard J. Moore <rich@kde.org>
The documentation says that QUdpSocket emits readyRead() only for one
datagram and that if you don't read it, the class will not emit again.
That should be implemented by disabling of the socket notifier once we
have the datagram already read, but was broken.
In turn, that breakage caused a live-lock of the event loop: since we
didn't disable the notifier nor read the pending datagram, the event
loop would fire every time for the same datagram.
The re-enabling of the notifier was already working.
Task-number: QTBUG-43857
Change-Id: Ic5d393bfd36e48a193fcffff13bb32ad390b5fe8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Since the conversion to a long name was already there, also support
creation from a long name.
Change-Id: Iad712db7447fb0a0a18f600b7db54da5b5b87154
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change-Id: Ie6c659f6d8e8b3eeaf2453f0cba6189d56f86581
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Add possibility to get length and other information of EC based
certificates. Also it is possible to parse those public/private
keys from PEM and DER encoded files.
Based on patch by Remco Bloemen
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
parse elliptic curve certificates.
Change-Id: I4b11f726296aecda89c3cbd195d7c817ae6fc47b
Task-number: QTBUG-18972
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_collections.cpp
tst_collections.cpp(3138) : warning C4305: 'argument' : truncation from 'size_t' to 'bool'
tst_collections.cpp(3190) : see reference to function template instantiation 'void testContainerTypedefs<QVector<int>>(Container)' being compiled
with[Container=QVector<int>]
(repeated)
tst_qringbuffer.cpp(297) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qringbuffer.cpp(300) : warning C4309: '=' : truncation of constant value
tst_qringbuffer.cpp(306) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qrawfont.cpp(947) : warning C4309: 'argument' : truncation of constant value
tst_qsslsocket_onDemandCertificates_member.cpp(217) : warning C4189: 'rootCertLoadingAllowed' : local variable is initialized but not referenced
Change-Id: I6143d4ad121088a0d5bdd6dd2637eb3641a26096
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Some of these tests are verifying things that are not supported
on Android, so we XFAIL these cases when we see the appropriate
error message.
Change-Id: I8245266f061c902515bb12251521159a8e19bfb7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Linux gracefully allows us to do that and treat the v6 socket as if it
were v4. Other OS (notably OS X) aren't so forgiving.
Change-Id: I13dd3274be2a4b13e8b1eef93cbc2dd17b648f96
Reviewed-by: Richard J. Moore <rich@kde.org>
We want to use "localhost" if the server's address is "any", as some OS
can't send datagrams to "any" (e.g., OS X and FreeBSD).
Change-Id: I1004bc2282e7f930cdb7ed394aa9f4b5a1cfcf82
Reviewed-by: Richard J. Moore <rich@kde.org>
On my Mac Mini, port 5000 is in use, which means the broadcasting test
fails.
Change-Id: Ifb0883263e277f388342430349ea7315d42f324a
Reviewed-by: Richard J. Moore <rich@kde.org>
It was unconditional. Someone forgot to check for IPv6 support before
skipping IPv6 tests.
Change-Id: I7b11528ad02560f0db9defde3c64f76f48a6c1f8
Reviewed-by: Richard J. Moore <rich@kde.org>
QUdpSocket doesn't support binding to QHostAddress::Any and then joining
an IPv4 multicat group since QHostAddress::Any is really an IPv6 socket
with v6only = false. The test did check this case, but failed to ignore
the warning.
Change-Id: I62d782408319a6e566e0ff1a6081b706ac1f669c
Reviewed-by: Richard J. Moore <rich@kde.org>
With IPv6, you cannot bind to a multicast address. You need to bind to a
local address only. The previous tests either checked this or didn't
check the result of bind().
Change-Id: Ief70887d8988fc1bc4394cf6ff34b5d560e5748e
Reviewed-by: Richard J. Moore <rich@kde.org>
Sending 100*8 packets of each type of message is WAY overkill. That's a
stress test without limiting. My Linux system starts reporting EAGAIN on
the socket, so reduce the amount of data sent.
Change-Id: I153f44cf3b91d37526dac580b400114cc80b1769
Reviewed-by: Richard J. Moore <rich@kde.org>
IPv6 has no such thing, so don't try to bind to an IPv6 address to send
broadcasts (even though that works) and it's a poor idea to bind to IPv6
to receive broadcasts. Moreover, skip any IPv6 network addresses
(broadcast() is invalid).
Change-Id: I2829b042c000158565adfd92db682f37d67dacae
Reviewed-by: Richard J. Moore <rich@kde.org>
If you don't have /etc/lsb-release, you'd get
sh: line 0: [: =: unary operator expected
Change-Id: Idb5c79f799879e4d32cd640ef74fb388227f831e
Reviewed-by: Richard J. Moore <rich@kde.org>
It doesn't make sense because there is no command to ask the proxy
server to join a multicast group. At best, we could write a datagram via
proxy without joining, but we definitely can't receive.
Change-Id: Icc6b54572a053fb7821dfca1f4111f2046ff8686
Reviewed-by: Richard J. Moore <rich@kde.org>
The Qt bug tracker URL changes as part of the qt.io transition
Change-Id: Icb4ab198943b93639b5e3a8d99262303785c6459
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The setEmptyDefaultConfiguration test creates a socket and connects its
sslErrors signal to tst_QSslSocket's ignoreErrorSlot slot. This slot
expects the socket to have been stored in tst_QsslSocket's "socket"
member, which was not being done. This patch fixes this problem.
It does beg the question of whether having a "socket" member in the
tst_QSslSocket class is a good idea as it is error prone.
Change-Id: Ic59d1789c5f1ed240c3f0c37981f6ecc35572f0d
Reviewed-by: Richard J. Moore <rich@kde.org>
The sslErrors and peerVerifyError test the same situation: connect to a
server which is using the fluke certificate, using the incorrect host name.
They connect respectively to qt-test-server:993 and the.server.ip.address:443.
The sslErrors is prone to backend-dependent failures concerning the order
in which SSL errors are received, just like the peerVerifyError test was
until recently.
This change merges these two tests into one, which is run against the same
two servers as previously. It also adds a check to ensure that sslErrors
and peerVerifyError emit the same SSL errors (regardless of order).
This also fixes the included headers for non-OpenSSL backends.
Change-Id: Ibd5f60d24f1682989378e87729389e4b8f9efac5
Reviewed-by: Richard J. Moore <rich@kde.org>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
[ChangeLog][QtNetwork][QtSSL] It is now possible to choose which elliptic
curves should be used by an elliptic curve cipher.
Change-Id: If5d0d58922768b6f1375836489180e576f5a015a
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This makes it follow the coding style, which says to camel case acronyms too,
and makes it consistent with the rest of the class.
Change-Id: I4a1b21de1815530e476fc5aa8a0d41c724fc8021
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: hjk <hjk121@nokiamail.com>
This patch is cherry-picked from
c38f1f19b8 and
d29d727d72
Task-number: QTBUG-32435
Change-Id: I6dbbb668b96737a5791bc688949a00bc09f1357f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
This patch is cherry-picked from
63ae74f365 and
07f234d2a8
Task-number: QTBUG-42528
Change-Id: I5f86679e62a4be48ce25afa5a4987a2b6678a357
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
After the poodle vulnerability SSLv3 should like SSLv2 no longer be
considered safe, so when a user request a safe protocol we should
only allow TLS versions.
[ChangeLog][QtNetwork][QSsl] QSsl::SecureProtocols now also excludes SSLv3
Change-Id: If825f6beb599294b028d706903b39db6b20be519
Reviewed-by: Richard J. Moore <rich@kde.org>
QNetworkDiskCache don't handle to set CookieHeader. so All Set-Cookie's value is invalid.
The root of cause is that metaDataChanged() don't work because of no slot for it.
Add the slot for it and renamed to _q_metaDataChanged.
Task-number: QTBUG-41514
Change-Id: I5cec017e59a1de69c6e89c0bc7209a73dcdc11da
Reviewed-by: Jeongmin Kim <jm86.kim@lge.com>
Reviewed-by: Jung Dong-Heon <clamp03@gmail.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
qsslsocket_winrt.cpp defined it locally, which runs the risk of
clashes with a potential user-defined qHash(QSslError), so
make it public.
Also included both .error() and .certificate() in the hash, as
both of these are used to determine equality (the WinRT version
only used .error()).
[ChangeLog][QtNetwork][QSslError] Can now be used in QSet/QHash.
Change-Id: Ieb7995bed491ff011d4be9dad544248b56fd4f73
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
qsslsocket_winrt.cpp defined it locally, which runs the risk of
clashes with a potential user-defined qHash(QSslCertificate), so
make it public.
Also, the implementation in qsslsocket_winrt.cpp simply hashed
the handle(), which violates the principle that equal instances
must hash to the same value. Also, for some platforms, the
implementation returns nullptr unconditionally, which, while not
violating the above-mentioned principle, will make all users of
the hash have worst-case complexity.
To calculate a meaningful hash, therefore, the certificate needs
to be inspected deeper than just the handle.
For OpenSSL, we use X509::sha1_hash, which also X509_cmp uses
internally to determine inequality (it checks more stuff, but
if X059::sha1_hash is different, X509_cmp() returns non-zero,
which is sufficient for the purposes of qHash()). sha1_hash may
not be up-to-date, though, so we call X509_cmp to make it valid.
Ugh.
For WinRT/Qt, we use the DER encoding, as that is the native
storage format used in QSslCertificate. This is not equivalent
to the implementation used in qsslsocket_winrt.cpp before, but
since handle() == handle() => toDer() == toDer(), it should not
be a problem.
[ChangeLog][QtNetwork][QSslCertificate] Can now be used as a key in QSet/QHash.
Change-Id: I10858fe648c70fc9535af6913dd3b7f3b2cf0eba
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
... so that a user can have more fine-grained uploadProgress signal
emissions if desired.
Change-Id: I9f77fd80c100dbe249beaf3057e6e8974680ec59
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
My previous fix for CPU load issues between HTTP thread
and user thread was fragile if the upload QIODevice
emitted readyRead() multiple times.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fix behavior of upload QIODevice
that generate data on readyRead() for HTTP PUT/POST
Change-Id: Idb1c2d5a382a704d8cc08fe03c55c883bfc95aa7
Reviewed-by: Christian Kamm <kamm@incasoftware.de>
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove an useless check which spontaneously allow direct reads from the
socket engine.
Change-Id: Ia3d2a572d6f1563d613fe2f00d0d6849df259827
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
device is private, always null and class has no friends, so no need to have it at all
Change-Id: I320d47f1a712a3202c08b494563533e29d185501
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Heuristic with last-modified time in Qt has some problems.
1) Remove redundant expirationDate.isInvalid() check
expirationDate.isInvalid is already checked. So I removed.
2) Add dateHeader.isInvalid() check
The dateHeader is used in expiration calculation.
I add invalid check for the dateHeader.
*. The dateHeader is the origin server's Date
3) Change diff time calculation.
The expirationDate is calculated with time diff.
Previous calculation is
// The lastModified is earlier than the currentDateTime.
// The diff has negative value.
int diff = currentDateTime.secsTo(lastModified);
// The expirationDate is earlier than lastModified
// , currentDateTime and dateHeader.
expirationDate = lastModified.addSecs(diff / 10);
*. currentDateTime: current time
*. lastModified: last modified date in server
It means that files are not cached with the heuristic.
I changed diff calculation.
int diff = lastModified.secsTo(dateHeader);
freshness_lifetime = diff / 10; // RFC 2616 13.2.4
4) httpRequest.headerField setting
If current_age is larger than 1 day, the cache MUST attach Warning 113.
*. The current_age is value of age in header
or elapsed time from dateHeader in Qt source code.
Previous code does not check current_age is larger than 1 day correctly.
// dt = 1970-01-01T00:00:00 + current_age
dt.setTime_t(current_age);
// currentDateTime is much bigger than 1970-01-01T00:00:00
if (dt.daysTo(currentDateTime) > 1)
Task-number: QTBUG-40836
Change-Id: I4b00c3b287e6fafeea6b02681533fe75a198247e
Reviewed-by: Jung Dong-Heon <dongheon.jung@lge.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
In some cases, e.g. when bad credentials are provided in an ftp URI,
QNetworkAccessAuthenticationManager::cacheCredentials is called with a
null authenticator. This authenticator should not be cached, because
it is useless, and leads to inconsistencies in the use of the cache
Task-number: QTBUG-40622
Change-Id: If2a0a422b915f268648f5eef1d68601446123371
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This makes non-OpenSSL backends able to handle to certificate
extensions.
This also converts the Q_OS_WINRT #ifdef's in the unit test to
QT_NO_OPENSSL as the behavior is the same for any non-OpenSSL
backend.
Change-Id: I6a8306dc5c97a659ec96063d5a59cee2ee9a63a9
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently the peerVerifyError test for QSslSocket makes an assumption
about the order in which SSL errors are emitted by peerVerifyError. This
assumption does not necessarily hold for non-OpenSSL backends.
This change fixes this assumption, and also checks that HostNameMismatch
was found both in the errors emitted by peerVerifyError and by sslErrors.
Change-Id: I856d1ea43b36332db0f178d35fc14a4bb18ad673
Reviewed-by: Richard J. Moore <rich@kde.org>
Some of the QSslSocket tests use OpenSSL-specific symbols. This
change fixes this issue.
Change-Id: Ib67efa42a15facaf0ad34fc0466341a37d945d1e
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
