There's no reason to use them here, the Mutable is misleading in a
few instances, ranged-for is much simpler, and more future-proof.
Change-Id: Ifd5eaae95bbaa0b4cf0f435e6cfee6d778817b44
Reviewed-by: David Faure <david.faure@kdab.com>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Bail out of cleanup() when run 2nd time.
Task-number: QTBUG-60626
Change-Id: I8a9be2fcfb0e8a5584ce8ed7952affff24bd2a33
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The square root of a sum of squares is easier to read and should be
computed more accurately if done for us by hypot(). Variables set
only once should be set as an initializer and declared const, to make
clear this is what's happening. Loop variables can be local to loops.
Adding a value to, or subtracting one from, a multiple of itself just
multiplies it be one plus (or minus) the multiplier; assigning the
result to the same variable is clearer as a *= (especially when the
factors are now overt numeric constants). An array of 16k floats all
updated in locksteck to the same value can be replaced by a single
float that holds that value. Simple things should not be needlessly
made more complicated - especially in example code, which should be
pedagogic.
Change-Id: Idab585cd7df1399c250d4b9f1396a085ae8f3864
Reviewed-by: hjk <hjk@qt.io>
All QWindow implementations must produce a frame before
returning from the expose event.
Change-Id: I5640809c47e948101879c1623c12230fa0a63c44
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch fixes the example that contained problems showing up
with mesa/nouveau drivers.
Change-Id: Ic90f6028e394138781f00bcc00c145c56134f441
Reviewed-by: Gunnar Sletta <gunnar@crimson.no>
For examples and documentation, use new BSD license text that
includes the commercial licenses.
Change-Id: I1cd74bd8e9c8f2746d8702df00780ee100cbebac
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
...in order to support sRGB framebuffers.
Add a --srgb option to the qopenglwidget example to allow testing.
[ChangeLog][QtWidgets][QOpenGLWidget] Added support for specifying
custom internal texture formats in QOpenGLWidget in order to make it
possible to have the widget backed by an sRGB-capable framebuffer.
Task-number: QTBUG-50987
Change-Id: I112e2f0ab0b1478c69e601031aa0bafaa87fa847
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Update the legacy grabber example to use the new QRegularExpression
class in place of the deprecated QRegExp.
Change-Id: I1d1871b7e82cdb214fdd8ad55a606d5e7682fab1
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
We can use QOverload since Qt 5.7 (it depends on Q_COMPILER_VARIADIC_TEMPLATES
which is required since Qt 5.7).
Use it in the examples to show the best practice.
qOverload currently can't be used because it requires c++14.
Change-Id: I94a3c0db9d551fe169fa3d19c07ec0b329d5946c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
OpenGL ES 3.1 introduces compute shaders. This patch enables them also
in QOpenGLShader/QOpenGLShaderProgram.
A GL/GLES example using QOpenGLShaderProgram for compute shaders is also
included.
Change-Id: I3951a302d7c2b096548f829b9b4578b5a525c453
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
... instead of creating a QDateTime object.
Change-Id: Ib57b52598e2f452985e9fffd145a36911de4fa9a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Examples should demonstrate best practice, and we can use the keyword
directly nowadays.
Change-Id: I1f122e5caceca17290757ffbaf3d660e7daa9ae4
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
while they are not built, their sources should be installed as long we
don't delete them completely.
Change-Id: I5e628e96cc9715520cb6e5aadb2cae61d1d03a4f
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Add command line options to be able to set the QCoreApplication attributes
that influence Open GL context creation and add a status label at the
bottom that displays it besides the QT_OPENGL environment variable.
Task-number: QTBUG-52693
Change-Id: Id9793292596e0feb3da5220fde2e5b2e495f87ff
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The glColorMask call was troublesome. In addition, the Qt::WA_TranslucentBackground
was misinterpreted and recommended misleadingly in the documentation. The hellogl2
example's --transparent argument was disfunctional in practice.
Replace glColorMask with glBlendFuncSeparate. The hellogl2 example and the docs are
now corrected wrt enabling semi-transparency in a QOpenGLWidget that is not a top-level
(which is the most common case).
Task-number: QTBUG-47276
Change-Id: I6f40e732d455f5efcf158649ac9a52ff9f240e85
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Add some extra rotations and offsets, to show off the power of
what you can do with a single draw call. Also use QGLWindow instead
of QGLWidget. This improves performance from 23 FPS to 30 FPS on a
4k monitor with integrated Intel graphics.
Change-Id: Iedac1c14cc6057959aa15faaacdf29da91f36ab1
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Using the approach we already do for some GLES 3.0 functions we can provide a cross-platform,
cross-GL-GLES wrapper for ES 3.0 and 3.1 functions too.
Applications only have to take extra care about the version requests (context version
and version directives in shader code), the rest of their code can stay the same across
desktop/mobile/embedded, even when ES 3 functions are used.
The new functions are placed to a new subclass which is placed between QOpenGLFunctions
and the internal QOpenGLExtensions. This is necessary because, unlike with QOpenGLFunctions,
there is no guarantee that these functions are always available in all configurations.
When running on desktop OpenGL, we resolve as usual. If the OpenGL version contains the
function in question, either in core or as an extension, it will all just work. This is
handy because it does not rely on 4.x extensions like GL_ARB_ESx_compatibility, and so
ES 3.0 functions will be functional on OpenGL 3.x systems too by just setting a 3.x version
number in the QSurfaceFormat.
We will no longer qFatal on broken systems where the driver returns a 3.0 or 3.1 context without
the corresponding functions present. Instead, we show a warning and gracefully fall back to
resolving as usual, via eglGetProcAddress or similar. For functions that are available in ES2 as
an extension this may just work fine.
Added also an example that runs identically both with OpenGL and OpenGL ES 3 and utilizes some
ES 3.0 features like instanced drawing.
[ChangeLog] Added QOpenGLExtraFunctions providing OpenGL ES 3.0 and 3.1 function wrappers in
a cross-platform manner.
Task-number: QTBUG-46161
Change-Id: I9f929eb61946c35c415b178c4d6ab2c1c958684e
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The Hello GL2 Example was using the older Signal/Slot syntax that made
use of the macros `SIGNAL()` and `SLOT()`. I changed it to the newer
one.
Change-Id: I8e55015383847a04b07f751fe9fc94b81956a896
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Introduce support for the widgets' clipRect(). Right now render-to-texture widgets
in scroll areas placed close to each other result in broken (non-existent) clipping.
Similarly, stack-on-top widgets fail to clip when placed inside a scroll area.
This is now corrected and the qopenglwidget example is enhanced to utilize a scroll
area.
Task-number: QTBUG-45860
Change-Id: I859a63d61a50d64ba9e87244f83c5969dce12337
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Add dynamic GL and remove warning about ANGLE since that
package no longer exists.
Task-number: QTBUG-46103
Change-Id: Icf93d1105434395a3c9ad61bb8c921fcedfc7137
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Fix Library not loaded/image not found error on application
startup.
With @rpath enabled (commit 6e18f57a) qmake now requires
a correct target.path in order to emit correct -rpath @loader_path
linker directives.
Change-Id: Ia32b038ad2d64819477be5cd9d1ed36768e2251b
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Also make the fragment shader a bit simpler
Change-Id: Ie50940da0a4f896504c9f5962cdb6c455983302f
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This patch replaces the old Qt logo with the new, flatter one.
The PNGs were optimized via: optipng -o7 -strip "all"
Task-number: QTBUG-41685
Change-Id: I51983a45144373bf7aee31a32990ecbb2582f488
Reviewed-by: Robert Loehning <robert.loehning@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Platforms like eglfs allow a single window per screen. Thus the behavior of
--multiple is not suitable since it tries to open multiple windows on the
primary screen. Instead, introduce --multiscreen.
Add also --timeout to quit the app after 10 seconds. This is essential on
platforms that do not have windows with decorations that can be used to
close windows.
With eglfs' kms/drm hooks, starting with --multiscreen will now show a
rotating logo on all connected displays, with some random background color.
Change-Id: I53f2651f05620e752c289038a9b3ff4508273173
Reviewed-by: Louai Al-Khanji <louai.al-khanji@digia.com>
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Retrieve vendor/renderer name similar to context info
and exclude renderers that do not support threaded
Open GL (ANGLE/noveau).
Change-Id: I690c2fc277538bf28bf1f6032c2e017ede15e434
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Trying to be smart and minimizing the amount of GL calls per frame
to provide a good example was a mistake (in a way): There are
components, like the eglfs mouse cursor, that change the context state.
To make sure the example work in these cases, set the state upon
each frame.
Change-Id: Ief1fd7bbb0fb1955a64dac97a071b7a3d9d506d4
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Like in all other places. This way the resulting QMenu is correctly
parented so it will show up at the proper position even on platforms
which do not have a way to position top-level windows.
Task-number: QTBUG-29025
Change-Id: I2aa6fe73699379029c44a3f379366a2133753190
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Use showMaximized(). Just calling show() without setting a size can result
in a zero-sized, invisible window on some platforms.
Change-Id: Ifa48258060e3d651c2fac3a1409a26a2c3db6bdb
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
On systems that give alpha configs by default writing alpha values of
less than 1.0 is a bad idea since it will lead to the content behind the
window becoming visible, even though this is not the example's intention.
Change-Id: I23cdfc1fb78d77b1cbc192d2aba5d6665a7acfcc
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
While we will cover the entire surface with our textured quads, the clear
is still necessary in order to make top-levels with TranslucentBackground
render correctly: We don't want to blend transparent areas with undefined
content that is in the surface's framebuffer.
Blending is problematic for alpha values. We now prevent the blended alpha
from being written out. This ensures that in examples like qquickviewcomparison,
where the backingstore image contains an alpha of 0.5 while the QQuickWidget
texture 1.0, the result is still an alpha value of 1.0 in the final image.
Writing out an alpha of 0.5 would break on systems where windows get an alpha
buffer by default.
hellogl2 can now take a --transparent parameter which makes the QOpenGLWidget
being cleared to transparent in order to verify it works in combination
with Qt::WA_TranslucentBackground.
The swapped red and blue problem is also corrected. RGBA8888 does not need
swizzling. The only format that needs this is RGB32.
Task-number: QTBUG-40716
Change-Id: I54a9fd3a91a1b59575b38cdb908835315514e40f
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Change them to use QOpenGLWidget and QOpenGLTexture.
Advocate also the usage of VBOs.
Hopeless examples, that rely on the fixed pipeline and will
not compile or work in ES and dynamic builds, are moved to
a "legacy" directory. The documentation pages for these are
removed. This long due change avoids the confusion newcomers
experience when trying to get started with Qt 5 and OpenGL.
hellowindow's behavior is changed to open a single window only
by default. The old default behavior, that opened three windows
on platforms that supported both MultipleWindows & ThreadedOpenGL,
can be requested by passing --multiple. --single is removed since it
is the default now. This plays much nicer with drivers that have
issues with threading.
In addition, say hello to hellogl2.
This is the old hellogl example updated to use QOpenGLWidget and
OpenGL 2. It also has a mainwindow with multiple (un)dockable widgets
containing the OpenGL widgets. This helps testing the behavior when
the top-level of the QOpenGLWidget changes and provides a very
important example of how to do proper resource management in this case.
(must use aboutToBeDestroyed() of the context, since the context goes
away and is replaced by a new one on every dock/undock)
As a bonus, the logo is now real 3D, no more orthographic nonsense.
Launch with --multisample to request 4x MSAA.
Launch with --coreprofile to request 3.2 Core. In this particular example
the shaders are present in both versions and there is a VAO so the application
is functional with core profile contexts.
Change-Id: Id780a80cb0708ef164cc172450ed74050f065596
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
1. Use includes without module prefixes, as is the custom in examples.
2. No inline functions to make it more readable.
3. Pause animation on pressing P and document our signal connection a bit more.
Change-Id: I68dc3d4c74b639cf3fec17b63b7f49626db58bdb
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
[ChangeLog] Added QOpenGLWindow. This serves as a convenience class for
creating windows showing OpenGL content via an API similar to QGLWidget
and without any widget dependencies.
Done-with: Jorgen Lind <jorgen.lind@digia.com>
Task-number: QTBUG-36899
Change-Id: I52e9bc61acb129dbfd3841b3adeffab2dbcf7f05
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
QOpenGLWidget is now public.
In addition Qt::WA_AlwaysStackOnTop is introduced to support the
special case of semi-transparent QOpenGLWidget or QQuickWidget on
top of regular widgets.
hellogl_es2 becomes the qopenglwidget example. This example performs
painting both via QPainter and native GL commands and has the OpenGL
widget combined with other, normal widgets.
The widget stack receives some changes when it comes to renderToTexture
widgets like QQuickWidget and QOpenGLWidget. Calling update() will now
result in a paint event, which is essential for QOpenGLWidget since we
want it to behave like a regular widget. The dirty region handling is
extended specially for such widgets due to performance reasons.
(an OpenGL content update must not result in any backingstore painting,
and is thus handled as a different kind of dirtiness)
[ChangeLog] Added QOpenGLWidget. This widget serves as a replacement for QGLWidget.
Task-number: QTBUG-36899
Task-number: QTBUG-40086
Change-Id: Ibf7f82fea99b39edfffd2fc088e7e0eadbca25cf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Q_DECL_OVERRIDE (which expands to 'override' for supported compiler)
helps to declare the intent (that it is an overridden function) and
force compilation error when there is no such virtual function in the
base class.
The examples should show the best practice of having it, as it may save
the programmer quite some time in case of change of API or typo in the
function name or arguments.
This change was done automatically with
clang-modernize -add-override -override-macros
And fixed MSVC compilation by removing inline for TorrentViewDelegate::paint
Change-Id: Ice66ae93fae571266f908703d5b8892b2c1ebb1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This is causing compilation errors on some Windows CE
configurations:
mainwidget.cpp(130) : error C3861: 'setlocale': identifier not found
mainwidget.cpp(149) : error C3861: 'setlocale': identifier not found
Change-Id: Ie863cd7c9c53cfef4074dabffe157d9068654a1c
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
No reason to restrict it to desktop only, the code works on ES2 too.
Task-number: QTBUG-35730
Change-Id: I915a88cbf3c95a941d6bafd88ed57fef0b6a25b9
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Platforms like eglfs will not allow opening more than one OpenGL-based
window. To prevent aborting the hellowindow example when invoked without
--single, enhance the capability check to include also WindowManagement
in addition to ThreadedOpenGL.
Change-Id: I147d90b31d9fd94912c36339d36af3f311aaa874
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
This introduces the ability to indirectly invoke all common GL1-GLES2
functions via QOpenGLFunctions. The GL1 functions are not yet resolved,
since this would not work anyway when linking to an OpenGL implementation
directly. However this may change later but that will be a completely
internal change without affecting any public APIs.
Also migrate some of the opengl examples to use QOpenGLFunctions for
everything. Once dynamic GL loading becomes available on some platforms,
these examples should continue to function without any changes since they
do not anymore invoke any OpenGL functions directly.
Task-number: QTBUG-36483
Change-Id: Ie630029651e5a4863a480aac5306edd67ee36813
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Remove the opengl proxy for now. Later it will either be moved into
a separate library or replaced by a QOpenGLFunctions-based approach.
This means that the -opengl dynamic configuration is not usable
for the time being. The rest of the enablers remain in place.
The convenience function QOpenGLFunctions::isES() is now moved to
QOpenGLContext and is changed to check the renderable type. This is
extremely useful since besides supporting dynamic GL it solves also
the problem of GL_ARB_ES2_compatibility (i.e. it triggers the real ES
path when creating an ES-compatible context with a desktop OpenGL
implementation).
Task-number: QTBUG-36483
Task-number: QTBUG-37172
Change-Id: I045be3fc16e9043e1528cf48e6bf0903da4fa7ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Besides serving as an example for performing OpenGL rendering inside
a window container in a way that it works across all GL versions,
this is an extremely useful tool for developers and users alike
since it allows quick and easy checking of what sort of context a
particular driver returns for a particular QSurfaceFormat.
NB! Depending on the OpenGL driver, some surprises can be expected.
The handling of core/compatibility profiles, the fwdcompat bit,
the supported GLSL versions, etc. tend to be somewhat different
across the different OpenGL implementations.
Task-number: QTBUG-37071
Change-Id: Iae4328e66cd0bb19f74a77fefef93ea5a3221e31
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Task-number: QTBUG-37027
Change-Id: Id18ee9c44650de9c434a82d3d10cf48e6ba9e78c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
glViewport expects device pixels, but the various
geometry accessors returns values in device-independent
pixels.
Change-Id: I8004692de82251e4f1f25bf8f2698895f222ede3
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The Qt Simulator is no longer supported with Qt 5.
Change-Id: I0f98351d482dd0554ea0754746d56f94ee6bf22f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Similarly to qmlscene, multisampling will only be requested when
passing --multisample on the command line. This is useful because (1)
multisampling is not really needed by this app and (2) it helps with
broken drivers that advertise MSAA configs but break when using them.
Change-Id: I50ff0db80843f488899901ab796eee588b62078b
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
And update the opengl/grabber example.
Task-number: QTBUG-31173
Change-Id: If09f1f3634b353d034f51240fc68be6ee7aabb48
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Depends on I8e81a0c6af61df1c4497a5934e2b89bad6f616f0 to properly
render the overlay.
Change-Id: I7ef6b726cc06eb750e7c00beb4ec6e80e85866a1
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Previously resizes along with the animation was implemented using queued
signals and slots, potentially causing a huge lag between the size of
the window and the rendered contents. Now the animation is always driven
by the rendering thread and is triggered based on the window's
isExposed() status.
Change-Id: Ifd89a63c2a436671a7b15326ff56be9ec2a5362d
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
