Multiplication is handled just as before. Ops other than multiplication
are handled by splatting the scalar into a matrix, then performing the
op as a componentwise matrix-op-matrix binary expression.
Change-Id: I654715c45bf5c91b8e9660fdf1c1c6d6818b621a
Bug: skia:11985
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408637
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
The mat4x2 portion of the test no longer checks its results, as there
are bugs in the Intel and Radeon GPU drivers that prevent mat4x2s
from being constructed properly.
The SkSL optimizer ends up eliminating the 4x2 matrix entirely because
it is unused by the rest of the code, as well at the 4x4 matrix which is
calculated from the 4x2. At this point, I'm OK with this.
Change-Id: If1464f9e4938b0a37b2ec180c686972389d94e83
Bug: skia:12003
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408900
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Previously, it was structured like Matrices.sksl and had no verification
of its results. Now it double-checks that its outputs match our
expectations. The test is still quite simple for now, however.
Change-Id: Iaa45fe58beb497a63801833f8ba5a493a61139d9
Bug: skia:11985, skia:12003
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408646
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This test was generating invalid code in Metal
(http://review.skia.org/408356), but we didn't catch it because the code
wasn't actually being run.
Change-Id: I649034593a566f9e835b1cf7b0702c64952d31ef
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408641
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Support for constant-expression function calls in SkSL now exists, and
support for abs() was added at http://review.skia.org/405676.
Change-Id: I3144af993db93a3d640971734d4cb03e0cfb8589
Bug: skia:10835
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408642
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit 90508f02dc.
Reason for revert: avoiding driver bugs this time
Original change's description:
> Revert "The Matrices test now verifies its results."
>
> This reverts commit 86121f6c0e.
>
> Reason for revert: tree sad
>
> Original change's description:
> > The Matrices test now verifies its results.
> >
> > Previously, this test did a bunch of matrix math but never actually
> > checked its results for correctness.
> >
> > Change-Id: I353be58049286266c2d561b0939b3874d2684403
> > Bug: skia:11985
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407360
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Commit-Queue: Brian Osman <brianosman@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
>
> TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
>
> Change-Id: I1335f01c14ee955426e02efaa3c30421cd41aa34
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:11985
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407617
> Reviewed-by: John Stiles <johnstiles@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
Bug: skia:11985
Change-Id: I214375d74977f324973da72c440d7ff5ff179016
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/408157
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 86121f6c0e.
Reason for revert: tree sad
Original change's description:
> The Matrices test now verifies its results.
>
> Previously, this test did a bunch of matrix math but never actually
> checked its results for correctness.
>
> Change-Id: I353be58049286266c2d561b0939b3874d2684403
> Bug: skia:11985
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407360
> Commit-Queue: John Stiles <johnstiles@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I1335f01c14ee955426e02efaa3c30421cd41aa34
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11985
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407617
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Previously, this test did a bunch of matrix math but never actually
checked its results for correctness.
Change-Id: I353be58049286266c2d561b0939b3874d2684403
Bug: skia:11985
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/407360
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is a reland of 830c69ca66
Original change's description:
> Implement operator== and != for Metal structs and arrays.
>
> GLSL/SkSL assumes that == and != on struct/array types should work.
> We need to emit equality and inequality operators whenever we find code
> that compares a struct or array.
>
> Structs and arrays can be arbitrarily nested, and either type can
> contain a matrix. All of these things need custom equality operators in
> Metal. Therefore, we need to recursively generate comparison operators
> when any of these types are encountered.
>
> For arrays we get lucky, and we can cover all possible array types and
> sizes with a single templated operator== method. Structs and matrices
> have no such luck, and are generated separately on a per-type basis.
>
> For each of these types, operator== is implemented as an equality check
> on each field, and operator!= is implemented in terms of operator==.
> Equality and inequality are always emitted together. (Previously, matrix
> equality and inequality were emitted and implemented independently, but
> this is no longer the case.)
>
> Change-Id: I69ee01c0a390d7db6bcb2253ed6336ab20cc4d1d
> Bug: skia:11908, skia:11924
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/402016
> Auto-Submit: John Stiles <johnstiles@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:11908, skia:11924, skia:11929
Change-Id: I6336b6125e9774c1ca73e3d497e3466f11f6f25f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/402559
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
There aren't many cases where array-of-struct types are useful in
ES2, but it looks like function parameters are one such case:
http://screen/7Fnc7GhewAkUK3j
Change-Id: I23410a3824a3c202c12147d6939586cc0e55a9ce
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/402397
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is a reland of 22dcb5fd7e
Original change's description:
> Add coords parameter to all .sksl test files used as runtime effects
>
> Convert to use the newer MakeForShader factory, which requires this.
>
> Change-Id: Ifaf6054054027c78f3f3fe15596e435e0f79b877
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/399336
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: John Stiles <johnstiles@google.com>
Bug: skia:11919
Change-Id: I5f745c54b2bc3712f2281db6e067345903e81931
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401836
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 22dcb5fd7e.
Reason for revert: Lot's of red Android and Win bots.
Original change's description:
> Add coords parameter to all .sksl test files used as runtime effects
>
> Convert to use the newer MakeForShader factory, which requires this.
>
> Change-Id: Ifaf6054054027c78f3f3fe15596e435e0f79b877
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/399336
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I0fa844c6cf985d16e72c7f26aa217752612dcfc1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/401077
Reviewed-by: Joe Gregorio <jcgregorio@google.com>
Commit-Queue: Joe Gregorio <jcgregorio@google.com>
Convert to use the newer MakeForShader factory, which requires this.
Change-Id: Ifaf6054054027c78f3f3fe15596e435e0f79b877
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/399336
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Most backends don't like init-stmts with multiple VarDeclarations inside
them, so we no longer emit IR that does this. This lets us avoid doing
backend-level fixups.
Change-Id: Ide839de18953a73e0f9c7a690df59a7bc3523f89
Bug: skia:11860
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/398221
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
We lacked test coverage for this case, and this was broken when compound
VarDeclarations were split from one Statement into several.
Change-Id: I561b4d8acc0bfa01161d873a0c022ec58e316903
Bug: skia:11860
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/396817
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Two of the tests are now (correctly) detected as invalid code, but were
previously checked into /shared/ because they compiled when the fuzzer
first reported them (that is, after the crash was fixed). These have
been moved into the /errors/ test folder.
One of the tests was only generating an error because its main function
was named `a` instead of `main`, so I renamed it to `main`.
Change-Id: I1a2346fb16e304b0c66ff377a3f9bf7e7ee89ba9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/394899
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
These builtins have been obsolete for a long time; they were only
implemented on the GLSL backend. These values are provided in
u_skRTHeight and u_skRTWidth instead. (See GrGLSLProgramBuilder's
addRTHeightUniform and addRTWidthUniform.)
Change-Id: I8cceca348cbf9071939618f913693c316d35dbc6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/395001
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This test fell into disrepair when constant propagation was removed; it
assumed that @if and @switch would work on all unchanging variables, not
just those with the `const` modifier.
Change-Id: Ie9c1816f9c0852fdea998e4e156047e4cca9ad5b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/395000
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
GLSL (post-ES2) allows array comparison: http://screen/8gryPvb9T7gndyb
Unfortunately, because ES2 does not support array comparisons, we can't
add this test to the dm test suite.
Change-Id: I06b71683e49b2631669cff801dc647951a81a299
Bug: skia:11849
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/394162
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is allowed in OpenGL ES2, and its absence in SkSL has been a pain
point for new users adopting Runtime Effects.
Change-Id: Id2ed78261a2cd2b14b49ad22cb74cdc9e0905f8a
Bug: skia:11368
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/393418
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
OpenGL ES2 allows structs to be compared: http://screen/6KnX4ZfkdLtqDWv
This already worked in GLSL, Metal and SkVM.
Change-Id: Iaf7029c0c1ea9d447348c8280a2788f0d36befad
Bug: skia:11846
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/393598
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
We had constant-folding tests for vector-scalar arithmetic, but didn't
have an equivalent SkSL unit test for vector-scalar arithmetic that
actually needs to be computed at runtime.
This exposes two SPIR-V bugs: one was previously known, but the other
is a new discovery.
Change-Id: I28737128f20b445797c6c29872335d05f94cc95c
Bug: skia:11267, skia:11788
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/388739
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Change-Id: I22837a4921238749664217e595d24d196503534d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/388096
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Removed error tests which no longer test anything:
- UseWithoutInitialize...: we no longer track variable use-before-init.
- InlineDivideByZero: we no longer constant-fold the result of an
inlined function call into its parent statement.
- Unreachable: we no longer report unreachable statements.
And fixed some minor test-case issues:
- StaticSwitchConditionalBreak: we still check this, but the function
was being dead-stripped before this check could run. Renamed to main.
- OssFuzzXxxxx: these cases no longer report errors, but they are still
valuable as regression tests; moved to `shared/`.
Change-Id: Iade3cff821dc998cacfd02f62d3ac4625e48904c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/387820
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Now that name mangling is implemented, we don't need to worry about name
collisions when high-precision types are disabled.
Change-Id: Ic0def3e629deeb804745ff683826946947c898e3
Bug: skia:10851
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/387758
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
It turns out it is not legal to pass the results of OpAccessChain as a
function argument, for... reasons. This CL switches us over to passing
the argument via a temp variable instead.
Bug: skia:11748
Change-Id: Ib5e86c1d000655ebd7bb62ceea6a27b823808645
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/385936
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
A global variable should be considered "dead" if it's never written and
never read. The previous code checked if it was never written OR never
read, which is not the same.
This would generate GLSL/Metal that didn't compile. In SPIR-V, it would
SkASSERT, then crash, during codegen. The fuzzer was able to detect the
SPIR-V issue, but it was wrong in all three cases.
Change-Id: Id59a2499eb5baa3839b93826bfbc24191bfd490b
Bug: oss-fuzz:32005
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/385280
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
'in' variables without locations aren't allowed. Use uniforms instead.
Bug: skia:11738
Change-Id: Ic066106deb7409cff154b4be7cfb3e03a7025c7d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/385000
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Prevents us from accepting code that can't be correctly transformed to
GLSL, like:
uniform float x;
float y = x;
(Previously, writing code like that in a runtime effect would
effectively produce the exact same code all the way through to GLSL, and
the driver would fail to compile it).
Bug: skia:11336
Change-Id: Iaa797587c4a4a7289ed59ce2736cf0bf0fc5bca3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384698
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
We no longer derive a performance benefit from this pass in practice,
and it is a very expensive compilation step. It is also prone to fuzz-
related errors.
Doc: http://go/optimization-in-sksl
Change-Id: Ief08ffac659a8fe7fe92c92b9a5da14c9f713bc2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/381261
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Change-Id: I7a7874e58bf53978afce8a41b26092406b6490ed
Bug: skia:11342
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380360
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
- Values from constant variables are folded in when it helps, e.g.:
const bool SHINY = true;
const float SHININESS = 2;
if (!SHINY) { // <-- optimizes directly to `false`
param = -SHININESS; // <-- optimizes to `-2`
- Doubled-up logical-not and negation are stripped:
y = -(-x); // <-- optimizes to `y = x;`
b = !!a; // <-- optimizes to `b = a;`
Removal of doubled-up negation and logical-not was actually never
implemented in the constant-propagation phase; I just noticed it while
I was here and thinking about it.
Change-Id: Ie28bb9b5af91376f03d926e26e37f4a131bbf550
Bug: skia:11343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379298
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This enables the ternary to be optimized away in code like:
const bool SHINY = true;
color = SHINY ? add_shine(x) : x; // to --> `color = add_shine(x);`
Without constant propagation.
Also, I added a unit test for ternary expression simplification; I
wasn't able to find an existing one.
When the optimization flag is disabled, this CL actually removes the
optimization of `true ? x : y` --> `x` entirely; previously, this
substitution would be made regardless of optimization settings.
Change-Id: I93a8b9d4027902d35f8a19cfd6417170b209d056
Bug: skia:11343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379297
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This check now runs at function finalization time, before constant
propagation has occurred; this affected the "DeadIfStatement" test.
Our detection isn't smart enough to realize that a loop will run zero
times, so it treats `for` and `while` loops as always running at least
once. This isn't strictly correct, but it actually mirrors how the CFG
implementation works anyway. The only downside is that we would not flag
code like `for (i=0; i<0; ++i) { return x; }` as an error.
Change-Id: I5e43a6ee3a3993045559f0fb0646d36112543a94
Bug: skia:11377
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379056
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This should be legal, and we support this, but some versions of Android
do not: http://screen/3bkQewHF3xUMn5v There's no point in allowing
these shaders to exist; they can't compile on real-world clients, and
these vardecls are borderline meaningless (as the variables being
declared aren't reachable by any other statements).
Change-Id: Ie1351933c90caee9124eeab8983364ec030b2653
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379584
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit e4da7b672f.
Reason for revert: breaks SkSLBench perf test
Original change's description:
> Migrate if-statement simplifyStatement logic to IfStatement::Make.
>
> This performs essentially the same simplifications as before, just at
> a different phase of compilation.
>
> Change-Id: Ia88df6857d4089962505cd1281798fda74fd0b02
> Bug: skia:11343, skia:11319
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376177
> Commit-Queue: John Stiles <johnstiles@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I0051188ffe69426904066eb60a932435efdc2af8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11343
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379062
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This performs essentially the same simplifications as before, just at
a different phase of compilation.
Change-Id: Ia88df6857d4089962505cd1281798fda74fd0b02
Bug: skia:11343, skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376177
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
This adds Analysis::IsConstantExpression, to determine if an expression
is a constant-expression. It now expands to cover 'const' local and
global variables, because we also enforce that the initializer on those
variables is - in turn - a constant expression.
This fixes 10837 - previously you could initialize a const variable with
a non-constant expression, and we'd emit GLSL that contained that same
pattern, which would fail to compile at the driver level. That should
not be possible any longer.
Bug: skia:10679
Bug: skia:10837
Change-Id: I517820ef4da57fff45768c0b04c55aebc18d3272
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/375856
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The expression `~123` was making a PrefixExpression of type $intLiteral.
It should be converted to type `int` when the ~ prefix is applied.
This change also changes the output from oss-fuzz:27614. Both programs
are essentially nonsense expressions with no real behavior, so this is
fine.
Change-Id: I586be149ce95136fabee72fdd3473814d54948cf
Bug: oss-fuzz:31410
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376620
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
At IR generation time, this CL limits our optimizations to only
@switch statements. A regular switch statement will only be optimized
during the optimization phase even if the switch-value is a known
compile-time constant. This is done to avoid upsetting our reachability
analysis.
Most of this CL is moving existing logic from SkSLCompiler into
SkSLAnalysis and SkSLSwitchStatement. Although the diffs look large, the
actual changes are very small.
Change-Id: I90920f41bc386dfa7a980ae7510f6681231a5120
Bug: skia:11340, skia:11342, skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372679
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The optimizer now properly recognizes all types of exits from a switch
statement. Break, continue and return are all potential exits and need
to be considered when determining the exit path from the switch.
Previously, dead code elimination was hiding the effects of this bug
from us, but it meant that an optimized switch had the potential to
generate lots of worthless IR nodes which then needed to be detected and
eliminated by the CFG. In particular, this affected the enum form of
blend, causing a catastrophic amount of extra work to be done.
Change-Id: If857e38cadfc016884624ea4db25a273ad3dce5b
Bug: skia:11352
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372958
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The CL at http://review.skia.org/366399 introduced a bug with
LValue::getPointer. Specifically, getPointer used to return zero when
no pointer is available. (This happens when the LValue is a swizzle.)
That CL changed the error code to -1. However, it did not fix up all
the call sites that checked the return value of getPointer().
This CL fixes up those call sites to use -1 consistently, and adds
TODOs in spots which do not check the result from getPointer() at all
(instead assuming it cannot fail). This will allow swizzled out-
parameters to work in SPIR-V as they did before. (Except in intrinsics,
where they seem to have been broken all along, but those are now marked
with a TODO at least.)
Note that we still do not fully emulate GLSL semantics for out
parameters, as out-parameters should only be copied back to the original
variable at the end of the function call to be fully GLSL compliant.
(This CL also replaces a tuple with a named struct for readability.)
Change-Id: I708dc7a69296a4244ba9ceb85c3e68d1f331bbc9
Bug: skia:11052
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368618
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Uses the pipeline-stage callback mechanism. It mangles the type name
(with a test to verify that this works), and then calls defineStruct
with the entire SkSL struct definition string.
Bug: skia:10939
Change-Id: If14cf1b11faaa80ad8d4086cdacf68532bac43fc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368809
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Disabled on Adreno 5xx/6xx as the tests do not pass on those GPUs:
http://screen/3Dkgs9syj37cjBV
Change-Id: Ib935d01e8f06dbfe7decd5cc4e52e0688b48be08
Bug: skia:11306, skia:11308
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368805
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
"Constant" is an address space qualifier and can't be applied to a
local variable. "Const" in GLSL (and hypothetically SkSL) is meant to
apply to a constant expression regardless of address space.
Our previous test was not finding any error because the optimizer was
eliminating the constant expressions entirely.
Change-Id: I6cfe8e2a621c79945b33e0166780d81e79890a1b
Bug: skia:11304
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368517
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit c501857188.
Reason for revert: breaking many bots
Original change's description:
> Add support for matrix == and != in Metal shaders.
>
> We need to polyfill an operator== and != when these are first
> encountered in the code.
>
> Change-Id: I539c838ee1871bcb0c4b66abb8a4a0f91146cd4f
> Bug: skia:11306
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368496
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: Id583109a0d167c2c58a57644b14cd5f49d670737
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11306
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368801
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
We need to polyfill an operator== and != when these are first
encountered in the code.
Change-Id: I539c838ee1871bcb0c4b66abb8a4a0f91146cd4f
Bug: skia:11306
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368496
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The leftover tests in shared/ are not easily testable as Runtime
Effects; they do things that ES2 doesn't support or use a feature not
exposed directly by Runtime Effects.
Change-Id: I7ebe170cf713c4a0d2dbef333c1fcbac2410c67f
Bug: skia:11009
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367059
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
This takes away one of our gadgets for thwarting dead-code elimination
in unit tests, but it's the right thing to do. Comma expression left-
sides without side effects are clearly dead code.
Change-Id: Iaee490b4a742d06a0a0be94cddaa69a51543d8f5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366719
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
- MultipleAssignments
- NegatedVectorLiteral
- NumberCasts
- OutParams
- OutParamsTricky (disabled on GPU due to skia:11269)
Change-Id: I87dc9c5019931f3d2dc3aafbe1e02d0eee2e1a05
Bug: skia:11009, skia:11269
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366400
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit 38df4c8470.
Reason for revert: updated ArrayTypes test for ES2 compatibility
Original change's description:
> Revert "Improve support for arrays in Metal."
>
> This reverts commit dd904af566.
>
> Reason for revert: breaks ANGLE
>
> Original change's description:
> > Improve support for arrays in Metal.
> >
> > Arrays in Metal now use the `array<T, N>` type instead of the C-style
> > `T[N]` type. This gives them semantics much more in line with GLSL,
> > so they can be initialized and assigned like GLSL arrays.
> >
> > This allows the ArrayTypes and Assignment tests to pass, so they have
> > been added to our dm SkSL tests. (ArrayConstructors also passes, but
> > is not ES2-compliant so it is not enabled.)
> >
> > Change-Id: Id1028311963084befd0e044e11e223af6a064dda
> > Bug: skia:10761, skia:10760, skia:11022, skia:10939
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365699
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
>
> TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
>
> Change-Id: If6a18dea7d6a45fa7836e9129bf81c2e536f07e3
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:10761
> Bug: skia:10760
> Bug: skia:11022
> Bug: skia:10939
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365976
> Reviewed-by: John Stiles <johnstiles@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Bug: skia:10761
Bug: skia:10760
Bug: skia:11022
Bug: skia:10939
Change-Id: Ia1c4917f5d3c41162d282b3093814d861707ad30
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366144
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit dd904af566.
Reason for revert: breaks ANGLE
Original change's description:
> Improve support for arrays in Metal.
>
> Arrays in Metal now use the `array<T, N>` type instead of the C-style
> `T[N]` type. This gives them semantics much more in line with GLSL,
> so they can be initialized and assigned like GLSL arrays.
>
> This allows the ArrayTypes and Assignment tests to pass, so they have
> been added to our dm SkSL tests. (ArrayConstructors also passes, but
> is not ES2-compliant so it is not enabled.)
>
> Change-Id: Id1028311963084befd0e044e11e223af6a064dda
> Bug: skia:10761, skia:10760, skia:11022, skia:10939
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365699
> Commit-Queue: John Stiles <johnstiles@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: If6a18dea7d6a45fa7836e9129bf81c2e536f07e3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10761
Bug: skia:10760
Bug: skia:11022
Bug: skia:10939
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365976
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Arrays in Metal now use the `array<T, N>` type instead of the C-style
`T[N]` type. This gives them semantics much more in line with GLSL,
so they can be initialized and assigned like GLSL arrays.
This allows the ArrayTypes and Assignment tests to pass, so they have
been added to our dm SkSL tests. (ArrayConstructors also passes, but
is not ES2-compliant so it is not enabled.)
Change-Id: Id1028311963084befd0e044e11e223af6a064dda
Bug: skia:10761, skia:10760, skia:11022, skia:10939
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365699
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
We now catch this error at IR generation time; previously we'd send it
to the driver (where it would fail to compile).
Change-Id: I45890214ffa164be1c0f359320f942bc4dc479ca
Bug: skia:11265
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365697
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This uncovered a bug in Metal code generation of `matX *= matY` which is
now fixed. (It was emitting the helper function more than once.)
Change-Id: I0aeb0efe7ab5fbf5592a8ca6f4f5b50354d3d7f4
Bug: skia:11262
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365489
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This works around a GLSL compilation bug on the Tecno Spark 3 Pro.
Change-Id: I516bd64745a8e99cccc87ee4bb2e1f5d5b26c130
Bug: skia:11255
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364116
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Previously, our only test was invoking `sin(1)` which is a pretty
ineffective test. Now, we test args and return types for all the basic
scalars/vectors/matrices.
Change-Id: I7d335303eef8b9c9c6cfef2265a15bbd9bd73e0c
Bug: skia:11246
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/363943
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
These tests have updated to return green on success, or red on failure.
Some tests were modified slightly to conform to ES2 limitations, or
split into separate ES2 and ES3 parts.
Change-Id: Ib47aeca217aef33f3c4b5999d93afed5d42a1e62
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/363876
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
We already had this trick for scalar integers, this extends it to
integer vectors. As with prior work in this area, it would be better to
detect this case and produce an error, but now we at least produce
consistent and well-defined results (rather than undefined signed
integer overflow).
Bug: skia:10932
Bug: oss-fuzz:29494
Change-Id: I45526fe96b6ea42c0e88b9862f6961b316810321
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/363962
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
The test has been split into an ES2 version and ES3 version; the ES2
side omits unsupported integer ops like << >> & | ^ %.
Change-Id: Iba16d469a477809b17a823b1c68ae8937624c68e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/362616
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
SkVMCodeGenerator was lacking support for the comma operator entirely;
this has now been implemented.
Change-Id: I9350f54e6ee52764c620116e6dbfe4ca3e9cd47e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/363096
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This allows interface blocks in Metal to compile even if
`layout(binding=...)` is not specified. It will also be used in SPIR-V
in the followup CL, when an interface block is automatically synthesized
for top-level uniforms.
This CL also reorganizes the unit tests around uniforms a bit.
Change-Id: Ia898c536b454dda6f51677e232a8f6e6c3606022
Bug: skia:11225
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/360778
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This is a known deficiency of runtime effects, next step is to fix how
they manage function signatures to solve the problem.
Bug: skia:10939
Change-Id: Id934e0acdf774b03bd6edce78d7b2c077bdeae00
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/360603
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 578f1acbe8.
Reason for revert: updated test to pass on Mac Intel 5100/6000
Original change's description:
> Revert "Add SkSL for-loop control flow test to dm."
>
> This reverts commit a0c266283a.
>
> Reason for revert: failing on Mac Intel
>
> Original change's description:
> > Add SkSL for-loop control flow test to dm.
> >
> > While loops and do-while loops remain untested in dm, as they are not
> > supported in ES2 (and therefore not available in Runtime Effects).
> >
> > Change-Id: I2f1bfccccd571cc4ced096bc18ebbb9ecc9f9b4a
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359556
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
>
> TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
>
> Change-Id: I45335d16a695644eaeb8a535298c0efcc616c1ce
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359840
> Reviewed-by: John Stiles <johnstiles@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I2dc6e870393708a12286658001b723f25a6aec4a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359856
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This creates a helper function, _entrypoint, which invokes main() and
assigns its result into sk_FragColor. We also make sure to prevent
sk_FragColor from being dead-stripped from the code during IR
generation.
At present this is useful for allowing our SkSL test shaders to compile.
Change-Id: I2d7fab0e1959a77778ffdb18ca569e869bcaeece
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/358525
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This lets us use descriptive names like `colorRed` and `colorGreen`
instead of `half4(1,0,0,1)` and `half4(0,1,0,1)`. It also lets us use
actual unknown values instead of synthesizing sorta-kinda-unknowns by
calling sqrt.
Change-Id: I61481c33b7ff42182955777b05cfa5fcc13e0efc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359567
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This allows uniforms to be specified without an explicit `layout(set=N)`
modifier. They will assume a default set value instead.
This turns out to fix a handful of tests in Metal/SPIR-V which were
written with GLSL in mind, or adapted from real generated GLSL code, and
didn't have layout information specified on their uniforms. It will also
make it easier to write SkSL tests using uniforms that can compile
either as a runtime effect or as plain Metal/SPIR-V code.
Change-Id: Id79ec06f278b913a45c09c2e6211195dc98b42c0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359838
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
In most cases, this works properly and a `;` is emitted, but in one
particular case (int x, y;) we get nothing.
Change-Id: If88d92502f6a533284dd4e0f78daedaf1481ff3d
Bug: skia:11218
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359558
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Change-Id: I94094be7163a04bf48e86406230156a5433469b6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359140
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Change-Id: I924ac75b5f8a397f7af7a06925ef0c9deba5c509
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359141
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Change-Id: I8309940f8e40d0e84847ae272830896d010c39de
Bug: skia:11219
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/359138
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This will allow us to load these inputs for unit testing in `dm`.
Change-Id: Id256ba7c30d3ec94b98048e47af44cf9efe580d5
Bug: skia:11009
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/357282
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
