No more:
#include SK_SFNTLY_SUBSETTER
#include ZLIB_INCLUDE
Also, rename SK_SFNTLY_SUBSETTER to SK_PDF_USE_SFNTLY
to follow my pattern of prefixing SkPDF-specific defines
with 'SK_PDF_'.
The ZLIB_INCLUDE define is no longer is used by anyone.
TODO: rename Sfntly to something pronounceable.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2273343002
Review-Url: https://codereview.chromium.org/2273343002
This removes the notion of keeping track of every different t value
that resolves to the same or a similar point. Other fixes make
this concept unnecessary, and removing it simplifies the code.
This removes an allocation, and speeds up paths with many
overlapping curves.
As a bonus, four fuzzer tests that failed before now succeed.
TBR=reed@google.com
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2275703003
Review-Url: https://codereview.chromium.org/2275703003
SkColorSpaces may be once-ptrs, so we can reuse common color spaces.
This means that they must be thread safe. SkMatrix44 is not
thread safe because it maintains a mutable type mask.
This CL ensures that we precompute the type mask so we
can use const SkMatrix44's safely.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2277463002
Review-Url: https://codereview.chromium.org/2277463002
I think we convinced ourselves that denorms, while a good chunk of half floats,
cover a rather small fraction of the representable range, which is always
close enough to zero to flush.
This makes both paths of the conversion to or from float considerably simpler.
These functions now work for zero-or-normal half floats (excluding infinite, NaN).
I'm not aware of a term for this class so I've called them "ordinary".
A handful of GMs and SKPs draw differently in --config f16, but all imperceptibly.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2256023002
Review-Url: https://codereview.chromium.org/2256023002
PNGs may contain a gAMA chunk that specifies gamma
values as floats. If so, we will use these floats
to create an SkColorSpace.
This CL fixes Equals(), serialize(), and
Deserialize() to correctly handle SkColorSpaces
with strange gammas, where we are unable to fall
back on the profile data.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2221983002
Review-Url: https://codereview.chromium.org/2221983002
Motivation: gross code simplification, also no bitset lookups at draw time.
SkPDFFont owns its glyph useage bitset.
SkPDFSubstituteMap goes away.
SkPDFObject interface is simplified.
SkPDFDocument tracks font usage (as hash set), not glyph usage.
SkPDFFont gets a simpler constructor.
SkPDFFont has first and last glyph set in constructor, not adjusted later.
SkPDFFont implementations are simplified.
SkPDFGlyphSet is replaced with simple SkBitSet.
SkPDFFont sizes its SkBitSets based on glyph count.
SkPDFGlyphSetMap goes away.
SkBitSet is now non-copyable.
SkBitSet now how utility methods to match old SkPDFGlyphSet.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2253283004
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Win-MSVC-GCE-CPU-AVX2-x86_64-Release-GDI-Trybot,Test-Win-MSVC-GCE-CPU-AVX2-x86_64-Debug-GDI-Trybot
Review-Url: https://codereview.chromium.org/2253283004
In rare cases, floating point error causes the tesselator to add the
same Vertex to more than one Poly on the same side. This was not a big
problem when we were allocating new vertices when constructing Polys,
but after https://codereview.chromium.org/2029243002 it causes more serious
issues, since each Edge can only belong to two Polys, and violating this
condition messes up the linked list of Edges used for left & right Polys
and the associated estimated vertex count.
The fix is to simply let the first Poly win, and skip that vertex for
subsequent Polys. Since this only occurs in cases where vertices are very
close to each other, it should have little visual effect.
This is also exercised by Nebraska-StateSeal.svg.
BUG=skia:5636
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2259493002
Review-Url: https://codereview.chromium.org/2259493002
Keep isOpaque as a convenience method -- many places really only need to
know that for optimization purposes (SrcOver -> Src, etc...).
In all the places where we pull data back out or convert to another
object and need to supply an SkImageInfo, we can avoid losing information
about premulness.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2250663002
Review-Url: https://codereview.chromium.org/2250663002
GrAppliedClip was about at its limit for how many "make" functions it
could have. Window rectangles would push it over the edge. This change
makes it so GrDrawTarget supplies the original draw bounds to the
constructor, and then GrClip adds the various required clipping
techniques.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2246113002
Review-Url: https://codereview.chromium.org/2246113002
Impl Overview
(1) Keep the device clip bounds up to date. This
requires minimal additional work in a few places
throughout canvas.
(2) Keep track of if the ctm isScaleTranslate. Yes,
there's a function that does this, but it's slow
to call.
(3) Perform the src->device transform in quick reject,
then check intersection/nan.
Other Notes:
(1) NaN and intersection checks are performed
simultaneously.
(2) We no longer quick reject infinity.
(3) Affine and perspective are both handled in the slow
case.
(4) SkRasterClip::isEmpty() is handled by the intersection
check.
Performance on Nexus 6P:
93.2ms -> 59.8ms
Overall Android Jank Tests Performance Impact:
Should gain us a ms or two on some tests.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2225393002
Committed: https://skia.googlesource.com/skia/+/d22a817ff57986407facd16af36320fc86ce02da
Review-Url: https://codereview.chromium.org/2225393002
Impl Overview
(1) Keep the device clip bounds up to date. This
requires minimal additional work in a few places
throughout canvas.
(2) Keep track of if the ctm isScaleTranslate. Yes,
there's a function that does this, but it's slow
to call.
(3) Perform the src->device transform in quick reject,
then check intersection/nan.
Other Notes:
(1) NaN and intersection checks are performed
simultaneously.
(2) We no longer quick reject infinity.
(3) Affine and perspective are both handled in the slow
case.
(4) SkRasterClip::isEmpty() is handled by the intersection
check.
Performance on Nexus 6P:
93.2ms -> 59.8ms
Overall Android Jank Tests Performance Impact:
Should gain us a ms or two on some tests.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2225393002
Review-Url: https://codereview.chromium.org/2225393002
Reason for revert:
Erg - dumb bug
Original issue's description:
> Create blurred RRect mask on GPU (rather than uploading it)
>
> This CL doesn't try to resolve any of the larger issues. It just moves the computation of the blurred RRect to the gpu and sets up to start using vertex attributes for a nine patch draw (i.e., returning the texture coordinates)
>
> All blurred rrects using the "analytic" path will change slightly with this CL.
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2222083004
>
> Committed: https://skia.googlesource.com/skia/+/75ccdc77a70ec2083141bf9ba98eb2f01ece2479TBR=bsalomon@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2236493002
This CL doesn't try to resolve any of the larger issues. It just moves the computation of the blurred RRect to the gpu and sets up to start using vertex attributes for a nine patch draw (i.e., returning the texture coordinates)
All blurred rrects using the "analytic" path will change slightly with this CL.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2222083004
Review-Url: https://codereview.chromium.org/2222083004
SkPDFFont:
- SkPDFType1Font::populate() encode advances correctly.
- break out logically independent code into new files:
* SkPDFConvertType1FontStream
* SkPDFMakeToUnicodeCmap
SkPDFFont.cpp is now 380 lines smaller.
Expose `SkPDFAppendCmapSections()` for testing.
SkPDFFontImpl.h
- Fold into SkPDFFont.
SkPDFConvertType1FontStream:
- Now assume given a SkStreamAsset
SkPDFFont:
- AdvanceMetric now hidden in a anonymous namespace.
No public API changes.
TBR=reed@google.com
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2221163002
Review-Url: https://codereview.chromium.org/2221163002
About 9x faster than Murmur3 for long inputs.
Most of this is a mechanical change from SkChecksum::Murmur3(...) to SkOpts::hash(...).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2208903002
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot;master.client.skia.compile:Build-Ubuntu-GCC-x86_64-Release-CMake-Trybot,Build-Mac-Clang-x86_64-Release-CMake-Trybot
Review-Url: https://codereview.chromium.org/2208903002
SkLiteRecorder, a new SkCanvas, fills out SkLiteDL, a new SkDrawable.
This SkDrawable is a display list similar to SkRecord and SkBigPicture / SkRecordedDrawable, but with a few new design points inspired by Android and slimming paint:
1) SkLiteDL is structured as one big contiguous array rather than the two layer structure of SkRecord. This trades away flexibility and large-op-count performance for better data locality for small to medium size pictures.
2) We keep a global freelist of SkLiteDLs, both reusing the SkLiteDL struct itself and its contiguous byte array. This keeps the expected number of mallocs per display list allocation <1 (really, ~0) for cyclical use cases.
These two together mean recording is faster. Measuring against the code we use at head, SkLiteRecorder trends about ~3x faster across various size pictures, matching speed at 0 draws and beating the special-case 1-draw pictures we have today. (I.e. we won't need those special case implementations anymore, because they're slower than this new generic code.) This new strategy records 10 drawRects() in about the same time the old strategy took for 2.
This strategy stays the winner until at least 500 drawRect()s on my laptop, where I stopped checking.
A simpler alternative to freelisting is also possible (but not implemented here), where we allow the client to manually reset() an SkLiteDL for reuse when its refcnt is 1. That's essentially what we're doing with the freelist, except tracking what's available for reuse globally instead of making the client do it.
This code is not fully capable yet, but most of the key design points are there. The internal structure of SkLiteDL is the area I expect to be most volatile (anything involving Op), but its interface and the whole of SkLiteRecorder ought to be just about done.
You can run nanobench --match picture_overhead as a demo. Everything it exercises is fully fleshed out, so what it tests is an apples-to-apples comparison as far as recording costs go. I have not yet compared playback performance.
It should be simple to wrap this into an SkPicture subclass if we want.
I won't start proposing we replace anything old with anything new quite yet until I have more ducks in a row, but this does look pretty promising (similar to the SkRecord over old SkPicture change a couple years ago) and I'd like to land, experiment, iterate, especially with an eye toward Android.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2213333002
Review-Url: https://codereview.chromium.org/2213333002
Change SkDataTable::NewXXX to SkDataTable::MakeXXX and return sk_sp.
This updates users of SkDataTable to sk_sp as well.
There do not appear to be any external users of these methods.
Review-Url: https://codereview.chromium.org/2211143002
With the move from SkData::NewXXX to SkData::MakeXXX most
SkAutoTUnref<SkData> were changed to sk_sp<SkData>. However,
there are still a few SkAutoTUnref<SkData> around, so clean
them up.
Review-Url: https://codereview.chromium.org/2212493002
Motivation: reduce code complexity.
SkCanon stores SkPDFShader::State next to SkDFObject, not inside.
many places use sk_sp<T> rather than T* to represent ownership.
SkPDFShader::State no longer holds bitmap.
SkPDFShader::State gets move constructor, no longer heap-allocated.
Classes removed:
SkPDFFunctionShader
SkPDFAlphaFunctionShader
SkPDFImageShader
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2193973002
Review-Url: https://codereview.chromium.org/2193973002
Lessons learned
1. ImageShader (correctly) always compresses (typically via PNG) during serialization. This has the surprise results of
- if the image was marked opaque, but has some non-opaque pixels (i.e. bug in blitter or caller), then compressing may "fix" those pixels, making the deserialized version draw differently. bug filed.
- 565 compressess/decompresses to 8888 (at least on Mac), which draws differently (esp. under some filters). bug filed.
2. BitmapShader did not enforce a copy for mutable bitmaps, but ImageShader does (since it creates an Image). Thus the former would see subsequent changes to the pixels after shader creation, while the latter does not, hence the change to the BlitRow test to avoid this modify-after-create pattern. I sure hope this prev. behavior was a bug/undefined-behavior, since this CL changes that.
BUG=skia:5595
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2195893002
Review-Url: https://codereview.chromium.org/2195893002
Most visibly this adds a macro SK_RASTER_STAGE that cuts down on the boilerplate of defining a raster pipeline stage function.
Most interestingly, SK_RASTER_STAGE doesn't define a SkRasterPipeline::Fn, but rather a new type EasyFn. This function is always static and inlined, and the details of interacting with the SkRasterPipeline::Stage are taken care of for you: ctx is just passed as a void*, and st->next() is always called. All EasyFns have to do is take care of the meat of the work: update r,g,b, etc. and read and write from their context.
The really neat new feature here is that you can either add EasyFns to a pipeline with the new append() functions, _or_ call them directly yourself. This lets you use the same set of pieces to build either a pipelined version of the function or a custom, fused version. The bench shows this off.
On my desktop, the pipeline version of the bench takes about 25% more time to run than the fused one.
The old approach to creating stages still works fine. I haven't updated SkXfermode.cpp or SkArithmeticMode.cpp because they seemed just as clear using Fn directly as they would have using EasyFn.
If this looks okay to you I will rework the comments in SkRasterPipeline to explain SK_RASTER_STAGE and EasyFn a bit as I've done here in the CL description.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2195853002
Review-Url: https://codereview.chromium.org/2195853002
Motivation:
SkPDFStream and SkPDFSharedStream now work the same.
Also:
- move SkPDFStream into SkPDFTypes (it's a fundamental PDF type).
- minor refactor of SkPDFSharedStream
- SkPDFSharedStream takes unique_ptr to represent ownership
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2190883003
Review-Url: https://codereview.chromium.org/2190883003
New API mirrors the form of similar APIs in SkRegion,
SkMatrix, etc.
This also fixes a bug:
SkImageInfo appears in a object that Chrome stores in
discardable memory. So when sk_sp<SkColorSpace> was added
to SkImageInfo a leak was introduced. We'll use this new
method and deserialize to store the SkColorSpace in the
discardable object.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2192903002
Review-Url: https://codereview.chromium.org/2192903002
The handling of angle-gl changes with SK_ANGLE. We don't have any bots
that test this particular combination, but I see it all the time while
running DM for other things.
Previously considered changing things so that the config parsing results
are consistent, regardless of GYP_DEFINES, but this is much simpler (and
more consistent with the other code we already have for testing config
parsing).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2183323004
Review-Url: https://codereview.chromium.org/2183323004
AtomicTest was the only use of sk_atomic_add().
AtomicInc64 bench was the only use of sk_atomic_inc(int64_t*).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2183473005
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-TSAN-Trybot,Test-Ubuntu-GCC-Golo-GPU-GT610-x86_64-Release-TSAN-Trybot
Review-Url: https://codereview.chromium.org/2183473005
* do a lot less floating-point math by converting to
an integer as early as possible [faster].
* round rather than truncate.
* use 8 significant digits rather than 9 when possible.
* remove trailing zeros in fractions.
before:
0.12 ! PDFScalar nonrendering
after:
0.07 ! PDFScalar nonrendering
Accuracy guaranteed by existing unit test.
Example diffs:
-/Shading <</Function <</C0 [.321568638 .333333343 .321568638]
+/Shading <</Function <</C0 [.32156864 .33333334 .32156864]
-/C1 [.258823543 .270588248 .258823543]
+/C1 [.25882354 .27058825 .25882354]
-1 0 0 -1 20 120.394500 Tm
+1 0 0 -1 20 120.394501 Tm
-1 0 0 -1 20 184.789001 Tm
+1 0 0 -1 20 184.789 Tm
-291.503997 0 l
+291.504 0 l
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2146103004
Review-Url: https://codereview.chromium.org/2146103004
Previously, SkClipStack would call "setEmpty" on itself when an
inverse-filled difference element made the stack empty. This was
a problem because setEmpty would forget the element had an inverse
fill, yet leave the op as "difference". This change modifies it to
manually update the clip bounds and set the gen-ID to kEmptyGenID,
rather than calling setEmpty.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2175493002
Review-Url: https://codereview.chromium.org/2175493002
If the length of a line path is sufficiently long relative to the dash
interval, it is possible to cause SkDashPathEffect::asPoints to produce
so many points that it overflows the amount that can fit in an int type,
or otherwise produce non-finite values, i.e. path from (0,0) to (0,9e15)
with a dash interval of 1.
This fixes that by capping the amount of points to a sane limit - in this
case, 1mil, since that limit is also used in utils/SkDashPath.cpp and has
precedent.
Downstream Firefox bug report: https://bugzilla.mozilla.org/show_bug.cgi?id=1287515
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2165013002
Review-Url: https://codereview.chromium.org/2165013002
Fix another fuzzer bug.
Some PathOps asserts only make sense if the incoming data is
well-behaved. Well-behaved tests set debugging state to
trigger these additional asserts.
Formalize this by creating macros similar to SkASSERT that
check to see if the assert should be skipped.
TBR=reed@google.com
BUG=629962
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2169863002
Review-Url: https://codereview.chromium.org/2169863002
This trims the SkPM4fPriv methods down to just foolproof methods.
(Anything trying to build these itself is probably wrong.)
Things like Sk4f srgb_to_linear(Sk4f) can't really exist anymore,
at least not efficiently, so this refactor is somewhat more invasive
than you might think. Generally this means things using to_4f() are
also making a misstep... that's gone too.
It also does not make sense to try to play games with linear floats
with 255 bias any more. That hack can't work with real sRGB coding.
Rather than update them, I've removed a couple of L32 xfermode fast
paths. I'd even rather drop it entirely...
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2163683002
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2163683002
I basically just ran a big 5-deep for-loop over the five constants here.
This is the first set of coefficients I found that round trips all bytes.
I suspect there are many such sets.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2162063003
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2162063003
This should give us a good baseline to explore using SkRasterPipeline.
A particular colorxform to half float drops from 425us to 282us on my desktop.
Color Xform to Half Float (HP z620)
Original 425us
Trans16 (not 32) 355us
Vector Trans16 378us
Trans16 + Keep Halfs in Vector 335us
Vector Trans16 + Keep Halfs in Vector 282us
Final 282us
Color Xform to Half Float (Nexus 5X)
Original 556us
Final 472us
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2159993003
CQ_INCLUDE_TRYBOTS=master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2159993003
GrTextureAccess optionally includes an instance, computed from the src
and dst color spaces. In all common cases (no color space for either src
or dst, or same color space for both), no object is allocated.
This change is orthogonal to my attempts to get color space attached to
render targets - regardless of how we choose to do that, this will give
us the source color space at all points where we are connecting src to
dst.
There are many dangling injection points where I've been inserting
nullptr, but I have a record of all of them. Additionally, there are now
three places (the most common simple paths for bitmap/image rendering)
where things are plumbed enough that I expect to have access to the dst
color space (all marked with XFORMTODO).
In addition to getting the dst color space, I need to inject shader code
and uniform uploading for appendTextureLookup and friends.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2154753003
Review-Url: https://codereview.chromium.org/2154753003
Most changes stem from working on an examples bracketed
by #if DEBUG_UNDER_DEVELOPMENT // tiger
These exposed many problems with coincident curves,
as well as errors throughout the code.
Fixing these errors also fixed a number of fuzzer-inspired
bug reports.
* Line/Curve Intersections
Check to see if the end of the line nearly intersects
the curve. This was a FIXME in the old code.
* Performance
Use a central chunk allocator.
Plumb the allocator into the global variable state
so that it can be shared. (Note that 'SkGlobalState'
is allocated on the stack and is visible to children
functions but not other threads.)
* Refactor
Let SkOpAngle grow up from a structure to a class.
Let SkCoincidentSpans grow up from a structure to a class.
Rename enum Alias to AliasMatch.
* Coincidence Rewrite
Add more debugging to coincidence detection.
Parallel debugging routines have read-only logic to report
the current coincidence state so that steps through the
logic can expose whether things got better or worse.
More functions can error-out and cause the pathops
engine to non-destructively exit.
* Accuracy
Remove code that adjusted point locations. Instead,
offset the curve part so that sorted curves all use
the same origin.
Reduce the size (and influence) of magic numbers.
* Testing
The debug suite with verify and the full release suite
./out/Debug/pathops_unittest -v -V
./out/Release/pathops_unittest -v -V -x
expose one error. That error is captured as cubics_d3.
This error exists in the checked in code as well.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128633003
Review-Url: https://codereview.chromium.org/2128633003
SkPDFUtils now has a special function (SkPDFUtils::AppendColorComponent)
just for writing out (color/255) as a decimal with three digits of
precision.
SkPDFUnion now has a type to represent a color component. It holds a
utint_8, but calls into AppendColorComponent to serialize.
Added a unit test that tests all possible input values.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2151863003
Review-Url: https://codereview.chromium.org/2151863003
It's become clear we need to sometimes deal with values <0 or >1.
I'm not yet convinced we care about NaN or +-inf.
We had some fairly clever tricks and optimizations here for NEON
and SSE. I've thrown them out in favor of a single implementation.
If we find the specializations mattered, we can certainly figure out
how to extend them to this new range/domain.
This happens to add a vectorized float -> half for ARMv7, which was
missing from the _01 version. (The SSE strategy was not portable to
platforms that flush denorm floats to zero.)
I've tested the full float range for FloatToHalf on my desktop and a 5x.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2145663003
CQ_INCLUDE_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot;master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot,Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-Fast-Trybot
Committed: https://skia.googlesource.com/skia/+/3296bee70d074bb8094b3229dbe12fa016657e90
Review-Url: https://codereview.chromium.org/2145663003
Reason for revert:
Unit tests fail on Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-Fast
Original issue's description:
> Expand _01 half<->float limitation to _finite. Simplify.
>
> It's become clear we need to sometimes deal with values <0 or >1.
> I'm not yet convinced we care about NaN or +-inf.
>
> We had some fairly clever tricks and optimizations here for NEON
> and SSE. I've thrown them out in favor of a single implementation.
> If we find the specializations mattered, we can certainly figure out
> how to extend them to this new range/domain.
>
> This happens to add a vectorized float -> half for ARMv7, which was
> missing from the _01 version. (The SSE strategy was not portable to
> platforms that flush denorm floats to zero.)
>
> I've tested the full float range for FloatToHalf on my desktop and a 5x.
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2145663003
> CQ_INCLUDE_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot;master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot,Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-Fast-Trybot
>
> Committed: https://skia.googlesource.com/skia/+/3296bee70d074bb8094b3229dbe12fa016657e90TBR=msarett@google.com,mtklein@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review-Url: https://codereview.chromium.org/2151023003
It's become clear we need to sometimes deal with values <0 or >1.
I'm not yet convinced we care about NaN or +-inf.
We had some fairly clever tricks and optimizations here for NEON
and SSE. I've thrown them out in favor of a single implementation.
If we find the specializations mattered, we can certainly figure out
how to extend them to this new range/domain.
This happens to add a vectorized float -> half for ARMv7, which was
missing from the _01 version. (The SSE strategy was not portable to
platforms that flush denorm floats to zero.)
I've tested the full float range for FloatToHalf on my desktop and a 5x.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2145663003
CQ_INCLUDE_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot;master.client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2145663003
If we make sure all SkOpts functions are static, we can give the namespaces any
name we like. This lets us drop the sk_ prefix and give a real indication of
the default SIMD instruction set rather than just saying sk_default.
Both of these changes help debugger, profiler, and crash report readability.
Perhaps more importantly, keeping these functions static helps prevent
accidentally linking in unused versions of functions, as you see here with
sk_avx::srcover_srgb_srgb().
This requires we update SkBlend_opts tests and benches to call SkOpts functions
through SkOpts rather than declaring the methods externally. In practice this
drops testing of the SSE2 version on machines with SSE4. If we still really
need to test/bench the compile time best SIMD level version of this method
against the runtime detected best, we can include SkBlend_opts.h into the tests
or benches directly, similar to what we do for the trivial, brute-force, or best
non-SIMD versions.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2145833002
CQ_INCLUDE_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2145833002
Now that there may be multiple font managers in a process the typeface
ids must be unique across all typefaces, not just unique within a font
manager. If two typefaces have the same id there will be issues in the
glyph cache. All existing font managers were already doing this by
calling SkFontCache::NewFontID, so centralize this in SkTypeface.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2147733002
Review-Url: https://codereview.chromium.org/2147733002
Reason for revert:
Monotonicity assert is failing on ARM. (Different rsqrt() and invert() precision?) Will investigate a bit tomorrow... might reland with the test TODO.
Original issue's description:
> Move sRGB <-> linear conversion components to their own files.
>
> This makes them a little easier to use outside SkColorXform code.
>
> I've added some notes about how best to use them and their eccentricities, and added a test.
>
> Ultimately any software sRGB <-> linear conversion should funnel somehow through here.
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128893002
> CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
>
> Committed: https://skia.googlesource.com/skia/+/45e58c8807179638980aae8503573b950b844e4cTBR=reed@google.com,msarett@google.com,mtklein@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review-Url: https://codereview.chromium.org/2131793002
This makes them a little easier to use outside SkColorXform code.
I've added some notes about how best to use them and their eccentricities, and added a test.
Ultimately any software sRGB <-> linear conversion should funnel somehow through here.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2128893002
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2128893002
The original caching logic for sample locations wishfully assumed that
the GPU would always use the same sample pattern for render targets
that had the same number of samples. It turns out we can't rely on
that. This change improves the caching logic to handle mismatched
simple patterns with the same count, and adds a unit test that
emulates different sample patterns observed on real hardware.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2111423002
Review-Url: https://codereview.chromium.org/2111423002
GL has a lot more optimizations checks here to make sure we do the most
effecient and correct draw here, but for now as long as the features
are support we just do basic draws for both reads and writes when we
need certain conversions.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2105433002
Review-Url: https://codereview.chromium.org/2105433002
Ensures that ".get()" always returns null when a container is empty.
Also ensures consistent assert behavior for array counts.
There are still differences in that the malloc variants take a size_t
and the arrays take an int, and that SkAutoSTMalloc defaults to the
stack-allocated buffer wheras the other containers default to null.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2084213003
Review-Url: https://codereview.chromium.org/2084213003
The following canonicalizations of path-backed GrShapes are added:
*convex shapes are stored with even/odd (or inv even/odd) fill.
*filled paths are closed.
*dashed paths ignore inverseness of the fill
This will improve the results of queries about the geometry that will be added in a future change.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2067283003
Review-Url: https://codereview.chromium.org/2067283003
Previously we were only asserting the mask wasn't empty, which isn't necessarily true when we're given pathological float coordinates like +Inf or NaN.
A local run of nanobench --match text_ was not able to show this is faster or slower.
This patch fixed this first Chrome bug on my desktop, and the second is probably a dupe.
BUG=chromium:619378,chromium:613912
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2073873002
Review-Url: https://codereview.chromium.org/2073873002
201295.jpg on HP z620
(300x280, most common form of sRGB profile)
QCMS Xform 0.495 ms
Skia Old Xform 0.235 ms
Skia NEW Xform 0.423 ms
Vs Old Code 0.56x
Vs QCMS 1.17x
So to summarize, we are now much slower than before,
but still a bit faster than QCMS. And now we are also
far more accurate than QCMS :).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2060823003
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2060823003
Reason for revert:
break deps roll
Original issue's description:
> Refactoring of GPU NormalMap handling out into its own class.
>
> The purpose of this change is to refactor the handling of normal maps out of SkLightingShader, laying the groundwork to eventually allow for multiple normal sources.
>
> What this CL includes:
>
> - Created a new 'NormalMapFP', out of the existing normal map reading behavior in LightingFP.
>
> - Encapsulates this new fragment processor on a new class NormalMapSource.
>
> - Created a NormalSource abstraction that will interface with SkLightingShader.
>
> - Adapted SkLightingShader to use the normals from its NormalSource field ON THE GPU SIDE. No changes done to the CPU side yet.
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2043393002
>
> Committed: https://skia.googlesource.com/skia/+/87b0dd00cf9409c5fc990f5d0bb7c0df837f08da
> Committed: https://skia.googlesource.com/skia/+/a7d1e2a57aef2aa4913d4380646d60bbab761318TBR=reed@google.com,dvonbeck@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review-Url: https://codereview.chromium.org/2068983005
The purpose of this change is to refactor the handling of normal maps out of SkLightingShader, laying the groundwork to eventually allow for multiple normal sources.
What this CL includes:
- Created a new 'NormalMapFP', out of the existing normal map reading behavior in LightingFP.
- Encapsulates this new fragment processor on a new class NormalMapSource.
- Created a NormalSource abstraction that will interface with SkLightingShader.
- Adapted SkLightingShader to use the normals from its NormalSource field ON THE GPU SIDE. No changes done to the CPU side yet.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2043393002
Committed: https://skia.googlesource.com/skia/+/87b0dd00cf9409c5fc990f5d0bb7c0df837f08da
Review-Url: https://codereview.chromium.org/2043393002
Reason for revert:
Breaking build and deps roll. Need to move include of SkBitmapProcShader in SkLightingShader.cpp from gpu include list to general list.
Original issue's description:
> Refactoring of GPU NormalMap handling out into its own class.
>
> The purpose of this change is to refactor the handling of normal maps out of SkLightingShader, laying the groundwork to eventually allow for multiple normal sources.
>
> What this CL includes:
>
> - Created a new 'NormalMapFP', out of the existing normal map reading behavior in LightingFP.
>
> - Encapsulates this new fragment processor on a new class NormalMapSource.
>
> - Created a NormalSource abstraction that will interface with SkLightingShader.
>
> - Adapted SkLightingShader to use the normals from its NormalSource field ON THE GPU SIDE. No changes done to the CPU side yet.
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2043393002
>
> Committed: https://skia.googlesource.com/skia/+/87b0dd00cf9409c5fc990f5d0bb7c0df837f08daTBR=reed@google.com,dvonbeck@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review-Url: https://codereview.chromium.org/2062133004
The purpose of this change is to refactor the handling of normal maps out of SkLightingShader, laying the groundwork to eventually allow for multiple normal sources.
What this CL includes:
- Created a new 'NormalMapFP', out of the existing normal map reading behavior in LightingFP.
- Encapsulates this new fragment processor on a new class NormalMapSource.
- Created a NormalSource abstraction that will interface with SkLightingShader.
- Adapted SkLightingShader to use the normals from its NormalSource field ON THE GPU SIDE. No changes done to the CPU side yet.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2043393002
Review-Url: https://codereview.chromium.org/2043393002
Currently, Skia always uploads GPU textures at full resolution. This
change allows us to pass a pre-scale mip level to the
deferred texture image logic, which causes us to pre-scale the image
to the given mip level, and upload that mip level instead of the full
image.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2007113008
Review-Url: https://codereview.chromium.org/2007113008
SkMipMap only deals with the levels it generates.
That is to day, it deals with mipmap levels 1-x, not 0-x.
Other functions reflect thing when indexing.
They go from 0 to x-1 (giving the index into SkMipMap's contents).
ComputeLevelSize should also follow that same indexing.
BUG=578304
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2042843005
Review-Url: https://codereview.chromium.org/2042843005
Fail out in a couple of new places when the input data is very
large and exceeds the limits of the pathops machinery.
Most of the change here plumbs in a way to exclude an assert in
one of these exceptional cases. The current SkAddIntersection
implementation and the inner functions it calls has no way to
report an error to the root caller for an early exit, so rather
than add that in, exclude the assert when the test that would
trigger it runs (allowing the test to otherwise ensure that it
properly fails).
TBR=reed@google.com
BUG=617586,617635
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2046713003
Review-Url: https://codereview.chromium.org/2046713003
$ git grep -l '<windows.h>' include src
include/private/SkLeanWindows.h
$ git grep -l SkLeanWindows.h | grep '\.h$'
include/ports/SkTypeface_win.h
include/utils/win/SkHRESULT.h
include/utils/win/SkTScopedComPtr.h
include/views/SkEvent.h
src/core/SkMathPriv.h
src/ports/SkTypeface_win_dw.h
src/utils/SkThreadUtils_win.h
src/utils/win/SkWGL.h
The same for `#include <intrin.h>` that was found in SkMath.h.
Those functions that needed it are moved to SkMathPriv.h.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2041943002
CQ_INCLUDE_TRYBOTS=tryserver.chromium.win:win_chromium_compile_dbg_ng,win_chromium_compile_rel_ng
Review-Url: https://codereview.chromium.org/2041943002
Reason for revert:
Still causing problems in Google3, e.g.
https://test.corp.google.com/ui#cl=124138817&flags=CAMQBQ==&id=OCL:124138817:BASE:124139560:1465227435491:219ffbdb&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
>
> Committed: https://skia.googlesource.com/skia/+/6fb2391b2cc83ee2160b4e994faa8128975acc1fTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=skia:4211
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2044573002
Review-Url: https://codereview.chromium.org/2044573002
Crash is caused by ldxc1 instruction, which traps when double values are
not aligned on 8-byte boundaries. Problem was tracked to SkChunkAlloc which
produces pointers aligned on 4-byte boundaries leading to misalignment.
This change makes sure that SkChunkAlloc will produce pointers that are
aligned to 8 bytes.
Appropriate tests are added to tests/MemsetTest.cpp
TEST=Build Chromium with Clang and run on MIPS32r2 platform
TEST=./out/Debug/dm --match Memset
BUG=130022
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1849183004
Review-Url: https://codereview.chromium.org/1849183004
