This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
- Set fDstInfo and fOptions in getPixels(). This may not be necessary
for all implementations, but it simplifies things for SkPngCodec.
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8c
Review-Url: https://codereview.chromium.org/2339273002
Reason for revert:
Killing Mac
Original issue's description:
> SkFontData to use smart pointers.
>
> The SkFontData type is not exposed externally, so any method which uses
> it can be updated to use smart pointers without affecting external
> users. Updating this first will make updating the public API much
> easier.
>
> This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
> std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
> appears that no one outside Skia is currently using SkStream::NewfromFile
> so this is a good time to update it as well.
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
>
> Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8cTBR=mtklein@chromium.org,halcanary@google.com,mtklein@google.com,reed@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2343933002
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Review-Url: https://codereview.chromium.org/2339273002
Reason for revert:
Broken perf bots
Original issue's description:
> Checking for valid colorType, alphaType, colorSpace in SkCodec
>
> * Refactor to share code between SkPngCodec and SkWebpCodec
> * Didn't end up sharing with SkJpegCodec but did refactor
> that code a bit
> * Disallow conversions to F16 with non-linear color spaces
> * Fail to decode if we fail to create a SkColorSpaceXform
> (should be an assert soon). We used to fallback on a
> legacy decode if we failed to create the transform.
> * A bunch of name changes
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2319293003
>
> Committed: https://skia.googlesource.com/skia/+/7a9900d6d34e437bb24beb5524a1f6488ae138c9TBR=scroggo@google.com,brianosman@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review-Url: https://codereview.chromium.org/2328663002
* Refactor to share code between SkPngCodec and SkWebpCodec
* Didn't end up sharing with SkJpegCodec but did refactor
that code a bit
* Disallow conversions to F16 with non-linear color spaces
* Fail to decode if we fail to create a SkColorSpaceXform
(should be an assert soon). We used to fallback on a
legacy decode if we failed to create the transform.
* A bunch of name changes
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2319293003
Review-Url: https://codereview.chromium.org/2319293003
Verify the rules that we're converging on for surfaces:
- For 8888, we only support sRGB-like gamma, or no color space at all.
- For F16, we require a color space, with linear gamma.
- For all other formats, we do not support color spaces.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2270823002
Review-Url: https://codereview.chromium.org/2270823002
SkLiteRecorder, a new SkCanvas, fills out SkLiteDL, a new SkDrawable.
This SkDrawable is a display list similar to SkRecord and SkBigPicture / SkRecordedDrawable, but with a few new design points inspired by Android and slimming paint:
1) SkLiteDL is structured as one big contiguous array rather than the two layer structure of SkRecord. This trades away flexibility and large-op-count performance for better data locality for small to medium size pictures.
2) We keep a global freelist of SkLiteDLs, both reusing the SkLiteDL struct itself and its contiguous byte array. This keeps the expected number of mallocs per display list allocation <1 (really, ~0) for cyclical use cases.
These two together mean recording is faster. Measuring against the code we use at head, SkLiteRecorder trends about ~3x faster across various size pictures, matching speed at 0 draws and beating the special-case 1-draw pictures we have today. (I.e. we won't need those special case implementations anymore, because they're slower than this new generic code.) This new strategy records 10 drawRects() in about the same time the old strategy took for 2.
This strategy stays the winner until at least 500 drawRect()s on my laptop, where I stopped checking.
A simpler alternative to freelisting is also possible (but not implemented here), where we allow the client to manually reset() an SkLiteDL for reuse when its refcnt is 1. That's essentially what we're doing with the freelist, except tracking what's available for reuse globally instead of making the client do it.
This code is not fully capable yet, but most of the key design points are there. The internal structure of SkLiteDL is the area I expect to be most volatile (anything involving Op), but its interface and the whole of SkLiteRecorder ought to be just about done.
You can run nanobench --match picture_overhead as a demo. Everything it exercises is fully fleshed out, so what it tests is an apples-to-apples comparison as far as recording costs go. I have not yet compared playback performance.
It should be simple to wrap this into an SkPicture subclass if we want.
I won't start proposing we replace anything old with anything new quite yet until I have more ducks in a row, but this does look pretty promising (similar to the SkRecord over old SkPicture change a couple years ago) and I'd like to land, experiment, iterate, especially with an eye toward Android.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2213333002
Review-Url: https://codereview.chromium.org/2213333002
This builds, links, and runs on Linux. Have not tried Mac.
I've tested is_debug={true,false} and is_component_build.
It's neat that the component build DM works, but it's also an indication I've missed an essential flag or two... it shouldn't work. :)
The GPU backend isn't working yet, but all the software configurations I've tried look good.
This fleshes out all the other parts of SkCodec too... I noticed we weren't able to decode gifs or webp.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2188643002
Review-Url: https://codereview.chromium.org/2188643002
201295.jpg on HP z620
(300x280, most common form of sRGB profile)
QCMS Xform 0.495 ms
Skia Old Xform 0.235 ms
Skia NEW Xform 0.423 ms
Vs Old Code 0.56x
Vs QCMS 1.17x
So to summarize, we are now much slower than before,
but still a bit faster than QCMS. And now we are also
far more accurate than QCMS :).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2060823003
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD-Trybot
Review-Url: https://codereview.chromium.org/2060823003
Instead of two synchronization systems (in_signal_handler, gMutex),
we can just use one. This simplifies the signal handler logic to:
- first thread through grabs the lock, prints what's running and a stack trace,
then exits
- all other threads just sit waiting on that lock until exit kills them
Previously I think all threads were racing to exit, which can kill the process
before the printing thread is done. That truncated the output, which is dumb.
Plus...
refactor slightly so that crash_handler() shows up at the top of the stack
trace rather than some odd name for a lambda inside setup_crash_handler().
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2051863002
Review-Url: https://codereview.chromium.org/2051863002
$ git grep -l '<windows.h>' include src
include/private/SkLeanWindows.h
$ git grep -l SkLeanWindows.h | grep '\.h$'
include/ports/SkTypeface_win.h
include/utils/win/SkHRESULT.h
include/utils/win/SkTScopedComPtr.h
include/views/SkEvent.h
src/core/SkMathPriv.h
src/ports/SkTypeface_win_dw.h
src/utils/SkThreadUtils_win.h
src/utils/win/SkWGL.h
The same for `#include <intrin.h>` that was found in SkMath.h.
Those functions that needed it are moved to SkMathPriv.h.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2041943002
CQ_INCLUDE_TRYBOTS=tryserver.chromium.win:win_chromium_compile_dbg_ng,win_chromium_compile_rel_ng
Review-Url: https://codereview.chromium.org/2041943002
Reason for revert:
Still causing problems in Google3, e.g.
https://test.corp.google.com/ui#cl=124138817&flags=CAMQBQ==&id=OCL:124138817:BASE:124139560:1465227435491:219ffbdb&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
>
> Committed: https://skia.googlesource.com/skia/+/6fb2391b2cc83ee2160b4e994faa8128975acc1fTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Not skipping CQ checks because original CL landed more than 1 days ago.
BUG=skia:4211
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2044573002
Review-Url: https://codereview.chromium.org/2044573002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
Still breaking Google3 e.g.:
https://sponge.corp.google.com/target?id=9261d31b-34fc-4f0f-981e-f92f7c5cea2c&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
https://test.corp.google.com/ui#cl=123773095&flags=CAMQBQ==&id=OCL:123773095:BASE:123773415:1464804876959:b0ea9b1c&t=//third_party/skia/HEAD:dm
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
>
> Committed: https://skia.googlesource.com/skia/+/30e78c9737ff4861dc4e3fa1e4cd010680ed6965TBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2026383002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539e
Review-Url: https://codereview.chromium.org/1997703003
Reason for revert:
This is failing tests and then crashing on Google3 [1]. The crashes are fixed by crrev.com/2026873002, but to fix the builder we'll need to upgrade its version of libpng.
[1] https://sponge.corp.google.com/target?id=e545ef55-4da4-4931-9524-1ac92acb61b1&target=//third_party/skia/HEAD:dm#shard=1|run=1|attempt=1|page=-1
Original issue's description:
> Make SkPngCodec decode progressively.
>
> This is a step towards using SkCodec in Chromium, where progressive
> decoding is necessary.
>
> Switch from using png_read_row (which expects all the data to be
> available) to png_process_data, which uses callbacks when rows are
> available.
>
> Create a new API for SkCodec, which supports progressive decoding and
> scanline decoding. Future changes will switch the other clients off of
> startScanlineDecode and get/skip-Scanlines to the new API.
>
> Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
> PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
> updateCurrScanline(), which was only used by the old implementation for
> interlaced PNG.
>
> DMSrcSink:
> - In CodecSrc::kScanline_Mode, use the new method for scanline decoding
> for the supported formats (just PNG and PNG-in-ICO for now).
>
> fuzz.cpp:
> - Remove reference to kNone_ScanlineOrder
>
> SkCodec:
> - Add new APIs:
> - startIncrementalDecode
> - incrementalDecode
> - Remove kNone_SkScanlineOrder and updateCurrScanline()
>
> SkPngCodec:
> - Implement new APIs
> - Switch from sk_read_fn/png_read_row etc to png_process_data
> - Expand AutoCleanPng's role to decode the header and create the
> SkPngCodec
> - Make the interlaced PNG decoder report how many lines were
> initialized during an incomplete decode
> - Make initializeSwizzler return a bool instead of an SkCodec::Result
> (It only returned kSuccess or kInvalidInput anyway)
>
> SkIcoCodec:
> - Implement the new APIs; supported for PNG in ICO
>
> SkSampledCodec:
> - Call the new method for decoding scanlines, and fall back to the old
> method if the new version is unimplemented
> - Remove references to kNone_SkScanlineOrder
>
> tests/CodecPartial:
> - Add a test which decodes part of an image, then finishes the decode,
> and compares it to the straightforward method
>
> tests/CodecTest:
> - Add a test which decodes all scanlines using the new method
> - Repurpose the Codec_stripes test to decode using the new method in
> sections rather than all at once
> - In the method check(), add a parameter for whether the image supports
> the new method of scanline decoding, and be explicit about whether an
> image supports incomplete
> - Test incomplete PNG decodes. We should have been doing it anyway for
> non-interlaced (except for an image that is too small - one row), but
> the new method supports interlaced incomplete as well
> - Make test_invalid_parameters test the new method
> - Add a test to ensure that it's safe to fall back to scanline decoding without
> rewinding
>
> BUG=skia:4211
>
> The new version was generally faster than the old version (but not significantly so).
>
> Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
>
> Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
>
> Committed: https://skia.googlesource.com/skia/+/a4b09a117d4d1ba5dda372e6a2323e653766539eTBR=reed@google.com,msarett@google.com,scroggo@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4211
Review-Url: https://codereview.chromium.org/2023103002
This is a step towards using SkCodec in Chromium, where progressive
decoding is necessary.
Switch from using png_read_row (which expects all the data to be
available) to png_process_data, which uses callbacks when rows are
available.
Create a new API for SkCodec, which supports progressive decoding and
scanline decoding. Future changes will switch the other clients off of
startScanlineDecode and get/skip-Scanlines to the new API.
Remove SkCodec::kNone_ScanlineOrder, which was only used for interlaced
PNG images. In the new API, interlaced PNG fits kTopDown. Also remove
updateCurrScanline(), which was only used by the old implementation for
interlaced PNG.
DMSrcSink:
- In CodecSrc::kScanline_Mode, use the new method for scanline decoding
for the supported formats (just PNG and PNG-in-ICO for now).
fuzz.cpp:
- Remove reference to kNone_ScanlineOrder
SkCodec:
- Add new APIs:
- startIncrementalDecode
- incrementalDecode
- Remove kNone_SkScanlineOrder and updateCurrScanline()
SkPngCodec:
- Implement new APIs
- Switch from sk_read_fn/png_read_row etc to png_process_data
- Expand AutoCleanPng's role to decode the header and create the
SkPngCodec
- Make the interlaced PNG decoder report how many lines were
initialized during an incomplete decode
- Make initializeSwizzler return a bool instead of an SkCodec::Result
(It only returned kSuccess or kInvalidInput anyway)
SkIcoCodec:
- Implement the new APIs; supported for PNG in ICO
SkSampledCodec:
- Call the new method for decoding scanlines, and fall back to the old
method if the new version is unimplemented
- Remove references to kNone_SkScanlineOrder
tests/CodecPartial:
- Add a test which decodes part of an image, then finishes the decode,
and compares it to the straightforward method
tests/CodecTest:
- Add a test which decodes all scanlines using the new method
- Repurpose the Codec_stripes test to decode using the new method in
sections rather than all at once
- In the method check(), add a parameter for whether the image supports
the new method of scanline decoding, and be explicit about whether an
image supports incomplete
- Test incomplete PNG decodes. We should have been doing it anyway for
non-interlaced (except for an image that is too small - one row), but
the new method supports interlaced incomplete as well
- Make test_invalid_parameters test the new method
- Add a test to ensure that it's safe to fall back to scanline decoding without
rewinding
BUG=skia:4211
The new version was generally faster than the old version (but not significantly so).
Some raw performance differences can be found at https://docs.google.com/a/google.com/spreadsheets/d/1Gis3aRCEa72qBNDRMgGDg3jD-pMgO-FXldlNF9ejo4o/
Design doc can be found at https://docs.google.com/a/google.com/document/d/11Mn8-ePDKwVEMCjs3nWwSjxcSpJ_Cu8DF57KNtUmgLM/
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1997703003
Review-Url: https://codereview.chromium.org/1997703003
This will allow me to test and visualize some assumptions
on parsing and applying color profiles. Also, it should
help me find and fix bugs.
This is certainly not an optimized implementation, and, as
far as I know, it doesn't take any shortcuts to improve
performance. We'll probably want to do both of these
once we know where it fits in the pipeline.
Right now this test is only run on an arbitrary set of ~100
images from the top 10k skps. I'll continue to add more
"interesting" images and probably tweak the code as
necessary.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1995233003
Review-Url: https://codereview.chromium.org/1995233003
When decoding to 565 or Gray, allow the client to incorrectly ask for premul.
When checking whether it's possible to decode to 565, return whether the
source is opaque.
In DM, allow decoding to 565 or Gray, even if the client also asked for premul.
This fixes a bug introduced in crrev.com/1999593003 when we stopped ever
requesting Opaque, resulting in us not testing 565 or Gray.
BUG=skia:4616
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=1996993003
Review-Url: https://codereview.chromium.org/1996993003
Only JPEG and WEBP support native scaling, so only create a CodecSrc
with a scale for those types.
If I run
dm --src image --images resources
this cuts down the number of Srcs from 11063 to 8032. All of these
trimmed Srcs would have failed quickly for each Sink (3 Sinks with the
above flags), but this will avoid creating them.
It drops the runtime on my mac from 13.2s to 11.4s, for about a 14%
speedup.
BUG=skia:5307
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1999103002
Review-Url: https://codereview.chromium.org/1999103002
With the GPU backend, allow F16 render targets to be created (along with
any other renderable format). We were previously just falling back to 8888.
In SampleApp, if the window configuration is F16, don't render directly
to the primary surface (which is actually sRGB 8888). Intead, make an
off-screen F16 surface, then blit it back to the framebuffer when we're done.
In DM, clamp values outside of [0,1]. These were wrapping, producing very
incorrect images. (Many filters can trigger out-of-range values due to
ringing).
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1890923003
Review URL: https://codereview.chromium.org/1890923003
I was using SkRect::MakeLargest() as bounds, which is sort of nutso,
as that clearly is way out of bounds for how big a picture can feasibly
be, i.e. something closer to SkIRect::MakeLargest().
This was causing spurious quick rejects in drawPatch(). I didn't really
look much deeper to figure out why. It's easy enough to just feed it the
proper bounds of the entire content.
This means patch_primitive draws correctly in sp-8888 mode.
I also noticed the GM was too small... it clipped off most of its content.
So I've made it larger.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1865143002
Review URL: https://codereview.chromium.org/1865143002
Also added SkSurfaceProps to SkSpecialImage, so that Image -> Surface conversion can preserve the desired behavior during filtering.
Many small changes, including a bunch of comments about places where we may be losing information right now. My approach was to ensure that if anything fails, it will always fall back to "legacy" mode - gamma-correctness is opt-in, so I'll just have to feed things through as missing cases are exposed.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1838953007
Review URL: https://codereview.chromium.org/1845283003
The following are currently unused in Android, Google3, Chromium, and Mozilla:
- SkEvent
- SkTime::GetMSecs
- SK_TIME_FACTOR (also unused in Skia)
- SkAutoTime
I left uses of SkMSec more-or-less intact for SkEvent, SkAnimator, and SkInterpolator. SkInterpolator is used in Chromium, so I did not want to change the API. The views/ and animator/ code is crufty, so it didn't seem worthwhile to refactor it. Instead, I added SkEvent::GetMSecsSinceStartup, which is likely to be adequate for use in SampleApp.
I also left SkMSec where it is used to measure a duration rather than a timestamp. With the exception of SkMovie, which is used in Android, all of the uses appear to measure the execution time of a piece of code, which I would hope does not exceed 2^31 milliseconds.
Added skiatest::Timer to support a common idiom in tests where we want to measure the wallclock time in integer milliseconds. (Not used in tests/PathOpsSkpClipTest.cpp because it redefines things in Test.h.)
Removed tabs in tests/StrokerTest.cpp.
BUG=skia:4632
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1811613004
Review URL: https://codereview.chromium.org/1811613004
The C++ standard library uses the name "release" for the operation we call "detach".
Rewriting each "detach(" to "release(" brings us a step closer to using standard library types directly (e.g. std::unique_ptr instead of SkAutoTDelete).
This was a fairly blind transformation. There may have been unintentional conversions in here, but it's probably for the best to have everything uniformly say "release".
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1809733002
Review URL: https://codereview.chromium.org/1809733002
Reason for revert:
GM breakage. Changes to SkGr.cpp appear to be altering behavior on a variety of tests. Debugging...
Original issue's description:
> Progress on gamma-correctness in the GPU backend. Fixed conversion of color and profile type to pixel config, which makes many things "just work".
>
> Added (color=8888|f16|srgb) option to gpu configurations, along with gpuf16, gpusrgb, and anglesrgb predefined configs. Runs the gpu backend in gamma-correct mode (with either FP16 linear or sRGB 8888 frambuffers).
>
> BUG=skia:
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1750383002
>
> Committed: https://skia.googlesource.com/skia/+/a6f58194733c1c50e4fe5f98585e42344f29b6f0TBR=mtklein@google.com,bsalomon@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1755553003
- Use std::atomic directly.
- No more need for SkPODSpinlock or SK_DECLARE_STATIC_SPINLOCK.
Now simple code like this works as you'd hope:
static SkSpinlock gLock;
That is, it starts unlocked and there's no static initializer.
std::atomic_flag would make this terser and standard-guaranteed,
but ATOMIC_FLAG_INIT caused not-yet-implemented errors on MSVC 2013.
The generated code for this approach is identical.
It appears the implicit constructor is constexpr when all the member
initializers are. I'm hoping this way of producing constexpr constructors
without typing "constexpr" gives us a way to eliminate more SkFoo / SkBaseFoo
distinctions and SK_DECLARE_STATIC_FOO. This was certainly the easiest.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1734383002
Review URL: https://codereview.chromium.org/1734383002
Reason for revert:
Breaks Ubuntu and Mac CMAKE
Original issue's description:
> Make SkPicture/SkImageGenerator default to SkCodec
>
> Remove reference to SkImageDecoder from SkPicture. Make the default
> InstallPixelRefProc passed to CreateFromStream use
> SkImageGenerator::NewFromEncoded instead.
>
> Make SkImageGenerator::NewFromEncoded create an SkCodecImageGenerator.
> Remove the old version that used SkImageDecoder.
>
> Remove all versions of lazy_decode_bitmap/LazyDecodeBitmap. The default
> now behaves lazily.
>
> Update all clients to use the default.
>
> Move SkImageDecoderGenerator into KtxTest.cpp, and use it directly.
>
> BUG=skia:4691
> BUG=skia:4290
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1671193002
>
> Committed: https://skia.googlesource.com/skia/+/026388a01864c74208ad57d1ba4f711602d101c6TBR=msarett@google.com,reed@google.com,scroggo@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4691
Review URL: https://codereview.chromium.org/1685963004
Remove reference to SkImageDecoder from SkPicture. Make the default
InstallPixelRefProc passed to CreateFromStream use
SkImageGenerator::NewFromEncoded instead.
Make SkImageGenerator::NewFromEncoded create an SkCodecImageGenerator.
Remove the old version that used SkImageDecoder.
Remove all versions of lazy_decode_bitmap/LazyDecodeBitmap. The default
now behaves lazily.
Update all clients to use the default.
Move SkImageDecoderGenerator into KtxTest.cpp, and use it directly.
BUG=skia:4691
BUG=skia:4290
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1671193002
Review URL: https://codereview.chromium.org/1671193002
RAW images use a lot of memory. Add a new FLAG to run one at a time so
we have less risk of running out of memory.
Isolate RAW images to their own thread on particular devices where our
images cause OOM errors.
Locally, this drops the max memory use from 3945 MB to 1664 MB (running only --image --images <RAW images we test>)
BUG=skia:4912
BUG=skia:4878
BUG=b/27035849
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1681553003
Review URL: https://codereview.chromium.org/1681553003
If a client requests unpremul or premul from an opaque SkCodec,
support it. The opaque image can be treated as any of them, though
it will be less efficient to draw than if the client had used
opaque.
Change the filling code (i.e. for incomplete images) to base its color on
the source alpha type. Prior to adding the support to decode opaque to
any, it was fine to use either source or dest (which would have yielded
the same result). If the client requests non-opaque, we do not want this
to switch the fill value from black to transparent. This also allows
simplifying the signatures for getFillValue and onGetFillValue.
In CodexTest, expect the same result when decoding opaque to *premul,
and compare to the opaque version.
BUG=skia:4616
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1641273003
Review URL: https://codereview.chromium.org/1641273003
Bump SK_IMAGE_VERSION to test the images in v2 in GoogleStorage, which
includes the images from v1 plus test images for SkRawCodec.
Only define skia_decodes_raw on platforms that support it, rather than
defining it always and checking additional conditions to determine
whether to support raw. Further, define it and SK_CODEC_DECODES_RAW
for all targets, so we can use the compile flag in other targets.
In DM, exclude the raw extensions if SK_CODEC_DECODES_RAW is not defined.
Blacklist raw extensions on NexusPlayer, which was running out of memory
when running them.
BUG=skia:4829
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1612113002
Review URL: https://codereview.chromium.org/1612113002
Reason for revert:
Speculative to fix windows bots
Original issue's description:
> Treat bad values passed to --images as a fatal error
>
> If an option is passed to --images that is either a non-existent path or
> a folder with no images matching the supported types, assume this is
> an error and exit, so they can supply a valid path instead.
>
> Share code between DM and nanobench in SkCommonFlags.
>
> nanobench now behaves more like DM - it will check a directory for
> images that match the supported extensions.
>
> Only consider image paths ending in RAW suffixes as images if
> SK_CODE_DECODES_RAW is defined. This prevents us from seeing failure
> to decode errors on platforms that cannot decode it.
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1611323004
>
> Committed: https://skia.googlesource.com/skia/+/7579786f3bd5a8fda84a1abc45b16213c3371f93TBR=mtklein@google.com,borenet@google.com,msarett@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
# Not skipping CQ checks because original CL landed more than 1 days ago.
Review URL: https://codereview.chromium.org/1653543002
If an option is passed to --images that is either a non-existent path or
a folder with no images matching the supported types, assume this is
an error and exit, so they can supply a valid path instead.
Share code between DM and nanobench in SkCommonFlags.
nanobench now behaves more like DM - it will check a directory for
images that match the supported extensions.
Only consider image paths ending in RAW suffixes as images if
SK_CODE_DECODES_RAW is defined. This prevents us from seeing failure
to decode errors on platforms that cannot decode it.
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1611323004
Review URL: https://codereview.chromium.org/1611323004
- add ViaPicture
- run ViaPicture on most bots
- run ViaSecondPicture (tests SkPictureRecorder reuse) and ViaTwice (tests caching) on some bots
- extend ViaSerialization reference checking to ViaPicture, ViaSecondPicture,
ViaSingletonPictures, and ViaTwice
- suppress current reference check failures with --blacklist
I'm open to following up on changing how those suppressions work.
Passing --nocheck turns off these invariant checks, letting us debug failures with normal image diff tools.
CQ_EXTRA_TRYBOTS=client.skia:Test-Win8-MSVC-ShuttleB-CPU-AVX2-x86_64-Release-Trybot
BUG=skia:4769
GOLD_TRYBOT_URL= https://gold.skia.org/search2?unt=true&query=source_type%3Dgm&master=false&issue=1569823006
Review URL: https://codereview.chromium.org/1569823006
