The separable blur algorithm gives +45% on SampleBlur, +84% on SampleBigBlur, +31% on TheVerge, +35 to +85% on blurbench in HQ (depending on size), +8 to +35% in low quality. (All of these on 32bit MacPro).
Review URL: https://codereview.appspot.com/6851117
git-svn-id: http://skia.googlecode.com/svn/trunk@6601 2bbb7eff-a529-9590-31e7-b0007b416f81
Search and replace:
GrCustomStage->GrEffect
GrCustomStageTestFactory->GrEffectTestFactory
renamed the cpp/h files from customStage->effect
reordered gypi, #includes, forward decls to maintain alphabetical sort.
manually fixed up some whitespace and linewraps
deleted a commented out #include
R=robertphillips@google.com
Review URL: https://codereview.appspot.com/6758046
git-svn-id: http://skia.googlecode.com/svn/trunk@6076 2bbb7eff-a529-9590-31e7-b0007b416f81
Existing filters which maintained their own filter connectivity were refactored to use the new constructors and flattening/unflattening code. Modifying the remaining filters which are not yet DAG-friendly is left for future work; they are considered to have zero inputs for now.
Review URL: https://codereview.appspot.com/6443119
git-svn-id: http://skia.googlecode.com/svn/trunk@5891 2bbb7eff-a529-9590-31e7-b0007b416f81
the premultiplying is done less efficiently than in the raster path: it's
done on each texture access, rather than as a pre-processing pass. This was
so I could do the filter as a single custom stage; will try the optimization
separately.
This implementation gives a ~30X speedup on the GPU results for the
matrixconvolution bench (~10X due to the GPU, and ~3X due to texture
uploads/readback removal).
Note: this changes the matrixconvolution for the software path as well, so
it will likely break the bots until that test is rebaselined.
Review URL: https://codereview.appspot.com/6585069/
git-svn-id: http://skia.googlecode.com/svn/trunk@5809 2bbb7eff-a529-9590-31e7-b0007b416f81
the matrix convolution filter. Test cases are added to the GM and the
bench.
NOTE: This will require rebaselining the matrixconvolution GM, so it will
likely turn the bots red until that is done.
https://codereview.appspot.com/6547049/
git-svn-id: http://skia.googlecode.com/svn/trunk@5661 2bbb7eff-a529-9590-31e7-b0007b416f81
is templated on the tiling mode for speed: interior pixels are unconditionally
fetched; border pixels apply the appropriate tiling mode before fetching. It
handles target, bias, divisor (as gain), and edge modes (named to be more
skia-like). It does not handle the "preserveAlpha" semantics of
feConvolveMatrix, nor "kernelUnitLength".
git-svn-id: http://skia.googlecode.com/svn/trunk@5592 2bbb7eff-a529-9590-31e7-b0007b416f81
Move Line2DPathEffect (now Sk_) into a separate header file so it can
be shared and initialized.
Switch to the shared version in SampleAll and SampleSlides.
Remove the skip pipe flag from texteffects, since it can now be serialized.
I have a separate change to turn serialization on by default at https://codereview.appspot.com/6498121/
Review URL: https://codereview.appspot.com/6503106
git-svn-id: http://skia.googlecode.com/svn/trunk@5512 2bbb7eff-a529-9590-31e7-b0007b416f81
element. This filter has two inputs, since normal blending can't be used. The
GPU side uses two filter stages to accomplish this: one to sample the
background, and one to sample the foreground and blend it.
Review URL: https://codereview.appspot.com/6463081/
git-svn-id: http://skia.googlecode.com/svn/trunk@5231 2bbb7eff-a529-9590-31e7-b0007b416f81
for filters with a single image input. This provides functionality to store,
flatten and unflatten a single SkImageFilter input, as well as to recursively
evaluate it on the CPU or GPU. The following classes were re-parented to
implement DAG connectivity: SkBlurImageFilter, SkDilateImageFilter,
SkErodeImageFilter, SkColorFilterImageFilter. The constructors for each
have been appended with a new parameter, representing the input filter
(default NULL).
This change also implements an arbitrary SkBitmap input source for filtering,
SkBitmapSource.
NOTE: This CL will require gyp file changes when rolling past this revision.
Review URL: https://codereview.appspot.com/6462071/
git-svn-id: http://skia.googlecode.com/svn/trunk@5170 2bbb7eff-a529-9590-31e7-b0007b416f81
This CL is an effort to stage the conversion to named
parameters for all SkFlattenable commands. This particular
stage only does the following two things...
1. Move flattenable buffers from SkFlattenable.h into
their own header.
2. Update and Add new read write methods for better clarity
and convenience.
BUG=
Review URL: https://codereview.appspot.com/6448095
git-svn-id: http://skia.googlecode.com/svn/trunk@4980 2bbb7eff-a529-9590-31e7-b0007b416f81
There are three light types for each: distant, point and spot, whose code
generation lives in a GrGLLight class hierarchy. This similar to the CPU
implementation, where each light type provides a function to compute the vector
from the surface plane to the light (surfaceToLight) and to compute the light
colour (emitLightColour). Instead of templated member functions, as in the CPU
implementation, these are virtual functions to emit the light-specific GLSL
code.
All of the code for the GPU path lives in the same file as that for the CPU
path, SkLightingImageFilter.cpp. In order to provide Ganesh a hook to access
it, SkImageFilter now has a asNewCustomStage() virtual, which allows an image
filter to return a GrCustomStage representing that filter.
Note that this patch does not handle the border conditions correctly (the
[top|bottom][Left|Right]Normal() functions in the CPU implementation). That
will come in a future patch.
Review URL: http://codereview.appspot.com/6345081/
git-svn-id: http://skia.googlecode.com/svn/trunk@4535 2bbb7eff-a529-9590-31e7-b0007b416f81
light, rather than the filter, so computation is localized. Changed a couple
of non-const refs in the image filter creation API const refs. Changed "const
SkColor&" to "SkColor", since it's just a uint32_t anyway.
Review URL: http://codereview.appspot.com/6352071/
git-svn-id: http://skia.googlecode.com/svn/trunk@4466 2bbb7eff-a529-9590-31e7-b0007b416f81
the caller instantiates a light (distant, point or spot), and an
SkDiffuseLightingFilter or SkSpecularLightingImageFilter with that light. A
Sobel edge detection filter is applied to the alpha of the incoming bitmap, and
the result is used as a height map for lighting calculations.
Review URL: http://codereview.appspot.com/6302101/
git-svn-id: http://skia.googlecode.com/svn/trunk@4314 2bbb7eff-a529-9590-31e7-b0007b416f81
called (for now at least) TwoPointConical, to distinguish it from the
existing one (TwoPointRadial), and to reflect its odd behavior where it draws
transparent outside the boundary of the "cone" between the two circles.
This impl is unsupported by GPU and Printing at the moment, and Chrome does not
yet invoke it.
Review URL: https://codereview.appspot.com/6299051
git-svn-id: http://skia.googlecode.com/svn/trunk@4197 2bbb7eff-a529-9590-31e7-b0007b416f81
or stroke parameters for a path.
Today, the patheffect only sees if the caller was going to stroke or fill, and
if stroke, it just sees the width. With this change, the effect can see all of the
related parameters (e.g. cap/join/miter). No other change is intended at this
time.
After this change, I hope to use this additional data to allow SkDashPathEffect
to, at times, apply the stroke as part of its effect, which may be much more
efficient than first dashing, and then reading that and stroking it.
Most of these files changed just because of the new parameter to filterPath. The
key changes are in SkPathEffect.[h,cpp], SkPaint.cpp and SkScalerContext.cpp
Review URL: https://codereview.appspot.com/6250051
git-svn-id: http://skia.googlecode.com/svn/trunk@4048 2bbb7eff-a529-9590-31e7-b0007b416f81
or stroke parameters for a path.
Today, the patheffect only sees if the caller was going to stroke or fill, and if
stroke, it just sees the width. With this change, the effect can see all of the
related parameters (e.g. cap/join/miter). No other change is intended at this
time.
After this change, I hope to use this additional data to allow SkDashPathEffect
to, at times, apply the stroke as part of its effect, which may be much more
efficient than first dashing, and then reading that and stroking it.
Most of these files changed just because of the new parameter to filterPath. The
key changes are in SkPathEffect.[h,cpp], SkPaint.cpp and SkScalerContext.cpp
Review URL: https://codereview.appspot.com/6249050
git-svn-id: http://skia.googlecode.com/svn/trunk@4046 2bbb7eff-a529-9590-31e7-b0007b416f81
The following changes were made by this CL:
1. Make flatten() a protected method as callers should use
SkFlattenableWriteBuffer to flatten an object
2. Make flatten a const method (including subclasses)
3. Mark subclass implementation of flatten with SK_OVERRIDE
4. Ensure overridden flatten impls call their parent
5. Remove no-op implementations of flatten from subclasses
Additionally, if necessary the unflattening constructor was
also moved to the protected section of the subclasses
header if it was not already there.
git-svn-id: http://skia.googlecode.com/svn/trunk@3540 2bbb7eff-a529-9590-31e7-b0007b416f81
of SkImageFilter. If that returns false, then the filter itself is invoked.
git-svn-id: http://skia.googlecode.com/svn/trunk@2977 2bbb7eff-a529-9590-31e7-b0007b416f81
M include/effects/SkAvoidXfermode.h
M include/effects/SkDiscretePathEffect.h
M include/effects/Sk1DPathEffect.h
M include/effects/Sk2DPathEffect.h
M include/effects/SkBlurDrawLooper.h
M include/effects/SkPixelXorXfermode.h
M include/effects/SkDashPathEffect.h
M include/effects/SkColorMatrixFilter.h
M include/effects/SkEmbossMaskFilter.h
M include/effects/SkLayerDrawLooper.h
M include/effects/SkGroupShape.h
M include/effects/SkBlurImageFilter.h
M include/effects/SkRectShape.h
A include/effects/SkEffects.h
M include/effects/SkCornerPathEffect.h
M include/effects/SkGradientShader.h
M include/effects/SkBlurMaskFilter.h
M include/effects/SkLayerRasterizer.h
M include/core/SkMallocPixelRef.h
M include/core/SkFlattenable.h
M include/core/SkShape.h
M include/core/SkPixelRef.h
M include/core/SkGraphics.h
M include/core/SkPathEffect.h
M include/core/SkPostConfig.h
M include/core/SkXfermode.h
M include/core/SkColorFilter.h
M include/images/SkFlipPixelRef.h
M include/images/SkImageRef_GlobalPool.h
M src/effects/SkDashPathEffect.cpp
M src/effects/SkColorMatrixFilter.cpp
M src/effects/SkBlurImageFilter.cpp
M src/effects/SkGroupShape.cpp
M src/effects/SkCornerPathEffect.cpp
M src/effects/SkGradientShader.cpp
M src/effects/SkBlurMaskFilter.cpp
M src/effects/SkAvoidXfermode.cpp
M src/effects/Sk2DPathEffect.cpp
M src/effects/SkBlurDrawLooper.cpp
M src/effects/SkPixelXorXfermode.cpp
M src/effects/SkColorFilters.cpp
M src/effects/SkLayerDrawLooper.cpp
M src/effects/SkRectShape.cpp
A src/effects/SkEffects.cpp
M src/effects/SkLayerRasterizer.cpp
M src/effects/SkDiscretePathEffect.cpp
M src/effects/Sk1DPathEffect.cpp
A src/effects/SkEffects_none.cpp
M src/core/SkPixelRef.cpp
M src/core/SkGraphics.cpp
M src/core/SkFlattenable.cpp
M src/core/SkBitmapProcShader.h
M src/core/SkPathEffect.cpp
M src/core/SkShape.cpp
M src/core/SkXfermode.cpp
M src/core/SkMallocPixelRef.cpp
M src/core/SkBitmapProcShader.cpp
M src/images/SkFlipPixelRef.cpp
M src/images/SkImageRef_GlobalPool.cpp
A src/ports/SkGlobalInitialization_chromium.cpp
M src/ports/SkImageRef_ashmem.h
M src/ports/SkImageRef_ashmem.cpp
A src/ports/SkGlobalInitialization_default.cpp
M gyp/effects.gyp
M gyp/tools.gyp
M gyp/ports.gyp
git-svn-id: http://skia.googlecode.com/svn/trunk@2876 2bbb7eff-a529-9590-31e7-b0007b416f81
The imageblur test also needed to stop calling getDeviceSize(), since it was
returning 99999x99999 for the SkPicture case.
git-svn-id: http://skia.googlecode.com/svn/trunk@2699 2bbb7eff-a529-9590-31e7-b0007b416f81
SkBlurImageFilter, sets it on an SkPaint, passes that paint to saveLayer(),
draws the primitives which are to be blurred, then calls restore(), which
applies the blur. The blurs have separate sizes in the horizontal and vertical
direction. This feature is GPU-only for now.
NB: Due to the clipping change, there are slight pixel differences on the
blurs_gpu and shadows_gpu tests, so those will require rebaselining on all
platforms, as will some of the WebKit layout tests (TBD).
Review URL: http://codereview.appspot.com/5322068/
git-svn-id: http://skia.googlecode.com/svn/trunk@2643 2bbb7eff-a529-9590-31e7-b0007b416f81
I have manually examined all of these diffs and restored a few files that
seem to require manual adjustment.
The following files still need to be modified manually, in a separate CL:
android_sample/SampleApp/AndroidManifest.xml
android_sample/SampleApp/res/layout/layout.xml
android_sample/SampleApp/res/menu/sample.xml
android_sample/SampleApp/res/values/strings.xml
android_sample/SampleApp/src/com/skia/sampleapp/SampleApp.java
android_sample/SampleApp/src/com/skia/sampleapp/SampleView.java
experimental/CiCarbonSampleMain.c
experimental/CocoaDebugger/main.m
experimental/FileReaderApp/main.m
experimental/SimpleCocoaApp/main.m
experimental/iOSSampleApp/Shared/SkAlertPrompt.h
experimental/iOSSampleApp/Shared/SkAlertPrompt.m
experimental/iOSSampleApp/SkiOSSampleApp-Base.xcconfig
experimental/iOSSampleApp/SkiOSSampleApp-Debug.xcconfig
experimental/iOSSampleApp/SkiOSSampleApp-Release.xcconfig
gpu/src/android/GrGLDefaultInterface_android.cpp
gyp/common.gypi
gyp_skia
include/ports/SkHarfBuzzFont.h
include/views/SkOSWindow_wxwidgets.h
make.bat
make.py
src/opts/memset.arm.S
src/opts/memset16_neon.S
src/opts/memset32_neon.S
src/opts/opts_check_arm.cpp
src/ports/SkDebug_brew.cpp
src/ports/SkMemory_brew.cpp
src/ports/SkOSFile_brew.cpp
src/ports/SkXMLParser_empty.cpp
src/utils/ios/SkImageDecoder_iOS.mm
src/utils/ios/SkOSFile_iOS.mm
src/utils/ios/SkStream_NSData.mm
tests/FillPathTest.cpp
Review URL: http://codereview.appspot.com/4816058
git-svn-id: http://skia.googlecode.com/svn/trunk@1982 2bbb7eff-a529-9590-31e7-b0007b416f81
SkGPipe needs this, since it cannot (unlike SkPicture) see all of the factories
before it hands its data to the reader.
In this mode, the writer embedds the factory name the first time it sees it,
and then after that writes an index (referencing the fFactorySet). The reader
installs an empty array, and as it encounters names, appends them to that array
so that subsequent indices can be used to retrieve the previously named factory.
Some of the existing patheffects did not register their factory names, so those
changes are also part of this CL. Annoyingly, to register your factory using the
current scheme, it has to be in the public section of the class definition.
git-svn-id: http://skia.googlecode.com/svn/trunk@1663 2bbb7eff-a529-9590-31e7-b0007b416f81
promise that const SkPaint& stay const (so we don't have bugs if a const paint
is referenced from two threads in pictures)
git-svn-id: http://skia.googlecode.com/svn/trunk@1074 2bbb7eff-a529-9590-31e7-b0007b416f81
Fixed rendering of shadows under bitmaps.
Added an option to SkBlurMask to produce higher quality blurs.
The HQ blur option is propagated through SkBlurDrawLooper so that it can be invoked by WebKit for drawing shadows.
Added a shadow rendering test to gm.
Bugs fixed: 146, 150
Related Chromium bugs: 11153, 42654
Code review: http://codereview.appspot.com/4174049
git-svn-id: http://skia.googlecode.com/svn/trunk@818 2bbb7eff-a529-9590-31e7-b0007b416f81
add SkShape baseclass, in the hopes of having SkPicture inherit from that, and
also using shapes as the extension mechanism for things like animated-gif
git-svn-id: http://skia.googlecode.com/svn/trunk@174 2bbb7eff-a529-9590-31e7-b0007b416f81
