v8/test/cctest/cctest.status

613 lines
26 KiB
Plaintext
Raw Normal View History

# Copyright 2011 the V8 project authors. All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
[
[ALWAYS, {
# All tests prefixed with 'Bug' are expected to fail.
'test-api/Bug*': [FAIL],
##############################################################################
# This test is so detailed in it's look at the literals array, I can't
# maintain it until the CL is done.
'test-heap-profiler/AllocationSitesAreVisible': [FAIL, ['lite_mode == True', SKIP]],
# These tests always fail. They are here to test test.py. If
# they don't fail then test.py has failed.
'test-serialize/TestThatAlwaysFails': [FAIL],
'test-api/SealHandleScope': [FAIL],
# This test always fails. It tests that LiveEdit causes abort when turned off.
'test-debug/LiveEditDisabled': [FAIL],
# This test always fails. It tests that DisallowJavascriptExecutionScope
# works as intended.
'test-api/DisallowJavascriptExecutionScope': [FAIL],
# We do not yet shrink weak maps after they have been emptied by the GC
'test-weakmaps/Shrinking': [FAIL],
'test-weaksets/WeakSet_Shrinking': [FAIL],
# Boot up memory use is bloated in debug mode.
'test-mark-compact/BootUpMemoryUse': [PASS, ['mode == debug', FAIL]],
# This tests only that the preparser and parser agree, so there is no point in
# running several variants. Note that this still takes ages, because there
# are actually 13 * 38 * 5 * 128 = 316160 individual tests hidden here.
'test-parsing/ParserSync': [PASS, NO_VARIANTS],
# This tests only the type system, no point in running several variants.
'test-types/*': [PASS, NO_VARIANTS],
# This tests API threading, no point in running several variants.
'test-api/Threading*': [PASS, SLOW, NO_VARIANTS],
# TODO(ulan): Renable after fixing the test's brittleness.
'test-heap/OutOfMemory': [SKIP],
# BUG(5193). The cpu profiler tests are notoriously flaky.
'test-profile-generator/RecordStackTraceAtStartProfiling': [SKIP],
'test-cpu-profiler/CollectDeoptEvents': [SKIP],
'test-cpu-profiler/CollectCpuProfile': [SKIP],
'test-cpu-profiler/JsNative1JsNative2JsSample': [SKIP],
'test-cpu-profiler/JsNativeJsRuntimeJsSample': [SKIP],
'test-cpu-profiler/JsNativeJsRuntimeJsSampleMultiple': [SKIP],
'test-cpu-profiler/JsNativeJsSample': [SKIP],
'test-cpu-profiler/HotDeoptNoFrameEntry': [SKIP],
'test-cpu-profiler/SampleWhenFrameIsNotSetup': [SKIP],
'test-sampler/LibSamplerCollectSample': [SKIP],
Revert "Reland "[cpu-profiler] Fix stack iterability for fast C calls with no exit frame"" This reverts commit ddaa1f0a0d44ee14103214ca7e34e990f87049bb. Reason for revert: Still flaky on windows. Maybe reland and keep skipped on windows? https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Win32%20-%20nosnap%20-%20shared/31002 https://ci.chromium.org/p/v8/builders/luci.v8.ci/V8%20Win64/27826 Original change's description: > Reland "[cpu-profiler] Fix stack iterability for fast C calls with no exit frame" > > This is a reland of d5f4a33eb853831a76832cacaf6f79d6771cb4cf > > Original change's description: > > [cpu-profiler] Fix stack iterability for fast C calls with no exit frame > > > > Before fast C calls, store the current FP and PC on the isolate. When > > iterating frames in SafeStackFrameIterator, check if these fields are > > set and start iterating at the calling frame's FP instead of the current > > FP, which will be in C++ code. We need to do this because c_entry_fp is > > not set on the Isolate for Fast-C-Calls because we don't build an exit > > frame. > > > > This change makes stack samples that occur within 'Fast-C-Calls' > > iterable, meaning we can properly attribute ticks within the JS caller. > > > > Fast-C-Calls can't call back into JS code, so we can only ever have one > > such call on the stack at a time, allowing us to store the FP on the > > isolate rather than the stack. > > > > TBR=v8-mips-ports@googlegroups.com > > > > Bug: v8:8464, v8:7202 > > Change-Id: I7bf39eba779dad34754d5759d741c421b362a406 > > Reviewed-on: https://chromium-review.googlesource.com/c/1340241 > > Commit-Queue: Peter Marshall <petermarshall@chromium.org> > > Reviewed-by: Jakob Gruber <jgruber@chromium.org> > > Reviewed-by: Martyn Capewell <martyn.capewell@arm.com> > > Reviewed-by: Alexei Filippov <alph@chromium.org> > > Cr-Commit-Position: refs/heads/master@{#57896} > > TBR=v8-mips-ports@googlegroups.com > TBR=jgruber@chromium.org > > Bug: v8:8464, v8:7202 > Change-Id: I5f37ded4ea572e8e9890ba186aa3d74a0dfc1274 > Reviewed-on: https://chromium-review.googlesource.com/c/1354042 > Reviewed-by: Peter Marshall <petermarshall@chromium.org> > Commit-Queue: Peter Marshall <petermarshall@chromium.org> > Cr-Commit-Position: refs/heads/master@{#57912} TBR=alph@chromium.org,jgruber@chromium.org,petermarshall@chromium.org,martyn.capewell@arm.com,v8-arm-ports@googlegroups.com,v8-mips-ports@googlegroups.com,ibogosavljevic@wavecomp.com Change-Id: If810648dbf60df2ff70455b6e8ef466136c90145 No-Presubmit: true No-Tree-Checks: true No-Try: true Bug: v8:8464, v8:7202 Reviewed-on: https://chromium-review.googlesource.com/c/1354461 Reviewed-by: Michael Achenbach <machenbach@chromium.org> Commit-Queue: Michael Achenbach <machenbach@chromium.org> Cr-Commit-Position: refs/heads/master@{#57925}
2018-11-29 08:05:25 +00:00
# BUG(7202). The test is flaky.
'test-cpu-profiler/NativeFrameStackTrace': [SKIP],
# BUG(7054)
'test-cpu-profiler/StaticCollectSampleAPI': [SKIP],
# BUG(2340). Preprocessing stack traces is disabled at the moment.
'test-heap/PreprocessStackTrace': [FAIL],
# BUG(4333). Function name inferrer does not work for ES6 clases.
'test-func-name-inference/UpperCaseClass': [FAIL],
'test-func-name-inference/LowerCaseClass': [FAIL],
# BUG(3742).
'test-mark-compact/MarkCompactCollector': [PASS, ['arch==arm', NO_VARIANTS]],
# Test that serialization with unknown external reference fails.
'test-serialize/SnapshotCreatorUnknownExternalReferences': [FAIL],
'test-serialize/SnapshotCreatorUnknownHandles': [FAIL],
'test-serialize/SnapshotCreatorNoExternalReferencesCustomFail1': [FAIL],
'test-serialize/SnapshotCreatorNoExternalReferencesCustomFail2': [FAIL],
# BUG(v8:8296). Flaky OOM test.
'test-heap/OutOfMemorySmallObjects': [SKIP],
# BUG(v8:8739). Wasm interpreter does not create proper stack traces.
'test-wasm-stack/RunWasmInterpreter_CollectDetailedWasmStack_WasmError': [SKIP],
# https://crbug.com/v8/8919
'test-platform/StackAlignment': [PASS, ['not is_clang', SKIP]],
############################################################################
# Slow tests.
'test-debug/CallFunctionInDebugger': [PASS, ['mode == debug', SLOW]],
'test-heap-profiler/ManyLocalsInSharedContext': [PASS, SLOW],
'test-jump-table-assembler/JumpTablePatchingStress': [PASS, SLOW],
'test-strings/StringOOM*': [PASS, ['mode == debug', SKIP]],
'test-serialize/CustomSnapshotDataBlobImmortalImmovableRoots': [PASS, ['mode == debug', SKIP]],
'test-parsing/ObjectRestNegativeTestSlow': [PASS, ['mode == debug', SKIP]],
}], # ALWAYS
##############################################################################
['arch == arm64', {
'test-api/Bug618': [PASS],
# BUG(v8:3385).
'test-serialize/StartupSerializerOnceRunScript': [PASS, FAIL],
'test-serialize/StartupSerializerTwiceRunScript': [PASS, FAIL],
# BUG(v8:3154).
'test-heap/ReleaseOverReservedPages': [PASS, FAIL],
# BUG(v8:3155).
'test-strings/OneByteArrayJoin': [PASS, ['mode == debug', FAIL]],
# BUG(v8:3247).
'test-mark-compact/NoPromotion': [SKIP],
# BUG(v8:3446).
'test-mark-compact/Promotion': [PASS, FAIL],
# BUG(v8:3434).
'test-api/LoadICFastApi_DirectCall_GCMoveStubWithProfiler': [SKIP],
}], # 'arch == arm64'
['arch == arm64 and simulator_run', {
# Pass but take too long with the simulator.
'test-api/ExternalArrays': [PASS, SLOW],
'test-api/Threading*': [SKIP],
}], # 'arch == arm64 and simulator_run'
##############################################################################
['variant == nooptimization and (arch == arm or arch == arm64) and simulator_run', {
# Slow tests: https://crbug.com/v8/7783
'test-cpu-profiler/MultipleIsolates': [SKIP],
}], # variant == nooptimization and (arch == arm or arch == arm64) and simulator_run
##############################################################################
['asan == True', {
# Skip tests not suitable for ASAN.
'test-assembler-x64/AssemblerX64XchglOperations': [SKIP],
# BUG(v8:7587): Strange breakage on Mac.
'test-log-stack-tracer/PureJSStackTrace': [SKIP],
}], # 'asan == True'
##############################################################################
['msan == True', {
# ICU upstream issues.
'test-strings/CountBreakIterator': [SKIP],
}], # 'msan == True'
##############################################################################
['tsan == True', {
# BUG(v8:6924). The test allocates a lot of memory.
'test-api/NewStringRangeError': [PASS, NO_VARIANTS],
}], # 'tsan == True'
##############################################################################
['no_snap == True', {
# Slow tests.
'test-api/ExternalWrap': [PASS, SLOW],
'test-api/FastReturnValues*': [PASS, SLOW],
'test-decls/CrossScriptReferences_Simple2': [PASS, SLOW],
# "WithWarmup" means starting from a snapshot, for which nosnap builds lack
# support.
'test-serialize/CustomSnapshotDataBlobWithWarmup': [SKIP],
'test-serialize/SnapshotDataBlobWithWarmup': [SKIP],
Reland "Reland "[builtins] Verify Isolate compatibility with the embedded blob"" This is a reland of 1e3582b5aecfeb0ffdca4bda3f1fd66d433236f6 Original change's description: > Reland "[builtins] Verify Isolate compatibility with the embedded blob" > > This is a reland of b022e825bd9f45279bb0c493a9081804f17455ae > > Original change's description: > > [builtins] Verify Isolate compatibility with the embedded blob > > > > Embedded builtins (= the embedded blob) have a few dependencies on the > > snapshot state. For instance, they require that metadata stored on > > builtin Code objects as well as the builtins constant table remain > > unchanged from mksnapshot-time. Embedders may violate these > > assumptions by accident, e.g. by loading a snapshot generated with > > different build flags, leading to seemingly unrelated failures later > > on. > > > > This CL introduces an Isolate hash stored in the embedded blob which > > hashes relevant parts of builtin Code objects and the builtins > > constant table. It's verified in Isolate::Init in debug builds. > > > > Bug: v8:8723 > > Change-Id: Ifc9bdbe6f56ea67d8984f162afa73a3572cfbba8 > > Reviewed-on: https://chromium-review.googlesource.com/c/1442641 > > Commit-Queue: Jakob Gruber <jgruber@chromium.org> > > Reviewed-by: Sigurd Schneider <sigurds@chromium.org> > > Cr-Commit-Position: refs/heads/master@{#59177} > > Tbr: yangguo@chromium.org,sigurds@chromium.org > Bug: v8:8723 > Change-Id: I1dd001783f0f1fae21a9809c8639e40f55b8f663 > Reviewed-on: https://chromium-review.googlesource.com/c/1445985 > Commit-Queue: Jakob Gruber <jgruber@chromium.org> > Reviewed-by: Jakob Gruber <jgruber@chromium.org> > Reviewed-by: Sigurd Schneider <sigurds@chromium.org> > Cr-Commit-Position: refs/heads/master@{#59236} Tbr: yangguo@chromium.org,sigurds@chromium.org Bug: v8:8723 Change-Id: I8e4ae2f09d16b693c1fb814477d8487385046ee4 Reviewed-on: https://chromium-review.googlesource.com/c/1448312 Reviewed-by: Sigurd Schneider <sigurds@chromium.org> Reviewed-by: Jakob Gruber <jgruber@chromium.org> Commit-Queue: Jakob Gruber <jgruber@chromium.org> Cr-Commit-Position: refs/heads/master@{#59250}
2019-01-31 13:48:53 +00:00
# Fails the embedded blob <-> Isolate verification step.
'test-serialize/CustomSnapshotDataBlobWithLocker': [SKIP],
# https://crbug.com/v8/7763
'test-lockers/ExtensionsRegistration': [SKIP],
}], # 'no_snap == True'
##############################################################################
['no_snap == True and system != windows and mode == debug', {
# BUG(v8:9400).
'test-heap/Regress615489': [SKIP],
}], # 'no_snap == True and system != windows and mode == debug'
##############################################################################
# TODO(machenbach): Fix application of '*'. Nosnap windows needs a separate
# section to not overwrite the expectations for TestThatAlwaysFails.
['no_snap == True and system == windows', {
# Windows doesn't support nosnap mode.
'test-serialize/*': [SKIP],
}], # 'no_snap == True and system == windows'
##############################################################################
['is_full_debug', {
# Tests too slow in non-optimized debug mode.
'test-api/InternalFieldsSubclassing': [SKIP],
'test-cpu-profiler/Inlining2': [SKIP],
'test-heap/TestInternalWeakLists': [SKIP],
}], # 'is_full_debug'
##############################################################################
['byteorder == big', {
# Skip WASM atomic tests on big-endian machines.
# There is no support to emulate atomic WASM operations on big-endian
# platforms, since this would require bit swapping as a part of atomic
# operations.
'test-run-wasm-atomics/*': [SKIP],
'test-run-wasm-atomics64/*': [SKIP],
}], # 'byteorder == big'
##############################################################################
['system == windows', {
# BUG(v8:4573).
'test-api/MultipleIsolatesOnIndividualThreads': [PASS, NO_VARIANTS],
# BUG(v8:4642).
'test-lockers/LockAndUnlockDifferentIsolates': [PASS, NO_VARIANTS],
# BUG(v8:8744).
'test-cpu-profiler/FunctionCallSample': [SKIP],
# BUG(5920): Flaky crash.
'test-serialize/PartialSerializerContext': [PASS, ['arch == x64 and mode == debug', SKIP]],
}], # 'system == windows'
##############################################################################
['system == windows and arch == x64 and mode == debug', {
# BUG(v8:6328).
'test-serialize/PartialSerializerCustomContext': [SKIP],
'test-serialize/PartialSerializerObject': [SKIP],
'test-serialize/StartupSerializerOnce': [SKIP],
'test-serialize/StartupSerializerOnceRunScript': [SKIP],
'test-serialize/StartupSerializerTwiceRunScript': [SKIP],
'test-serialize/StartupSerializerTwice': [SKIP],
}], # 'system == windows and arch == x64 and mode == debug'
##############################################################################
['arch == arm and simulator_run', {
# Pass but take too long with the simulator.
'test-api/Threading*': [SKIP],
}], # 'arch == arm and simulator_run'
##############################################################################
['arch == arm', {
# BUG(355): Test crashes on ARM.
'test-log/ProfLazyMode': [SKIP],
# BUG(1075): Unresolved crashes.
'test-serialize/StartupSerializerOnce': [SKIP],
'test-serialize/StartupSerializerTwice': [SKIP],
'test-serialize/StartupSerializerOnceRunScript': [SKIP],
'test-serialize/StartupSerializerTwiceRunScript': [SKIP],
}], # 'arch == arm'
##############################################################################
['arch == arm and not simulator_run', {
# crbug.com/v8/7605
'test-heap/OutOfMemorySmallObjects': [SKIP],
}], # 'arch == arm and not simulator_run'
##############################################################################
['arch == mipsel or arch == mips', {
# TODO(mips-team): Improve code-size on large RegExp's.
'test-heap/TestSizeOfRegExpCode': [SKIP],
# BUG(1075): Unresolved crashes on MIPS also.
'test-serialize/StartupSerializerOnce': [SKIP],
'test-serialize/StartupSerializerTwice': [SKIP],
'test-serialize/StartupSerializerOnceRunScript': [SKIP],
'test-serialize/StartupSerializerTwiceRunScript': [SKIP],
}], # 'arch == mipsel or arch == mips'
##############################################################################
['arch == mips', {
# Too slow with TF.
'test-api/ExternalArrays': [PASS, NO_VARIANTS],
# TODO(mips-team): Currently fails on mips board.
'test-parsing/TooManyArguments': [SKIP],
'test-api/Threading5': [SKIP],
'test-api/Threading6': [SKIP],
}], # 'arch == mips'
##############################################################################
['arch == mips64', {
# TODO(mips-team): Currently fails on mips64 board.
'test-run-wasm/RunWasmLiftoff_I32Binop*': [SKIP],
}], # 'arch == mips64'
##############################################################################
['arch == mips64el or arch == mips64', {
# BUG(v8:3154).
'test-heap/ReleaseOverReservedPages': [PASS, FAIL],
# TODO(mips-team): Improve code-size on large RegExp's.
'test-heap/TestSizeOfRegExpCode': [SKIP],
# BUG(1075): Unresolved crashes on MIPS also.
'test-serialize/StartupSerializerOnce': [SKIP],
'test-serialize/StartupSerializerTwice': [SKIP],
'test-serialize/StartupSerializerOnceRunScript': [SKIP],
'test-serialize/StartupSerializerTwiceRunScript': [SKIP],
}], # 'arch == mips64el or arch == mips64'
##############################################################################
['(arch == mipsel or arch == mips64el or arch == mips or arch == mips64) and not simd_mips', {
# Skip tests that fail on MIPS architectures which don't support SIMD,
# because lowering mechanism doesn't work properly
'test-run-wasm-simd/RunWasm_ReductionTest4_compiled': [SKIP],
'test-run-wasm-simd/RunWasm_ReductionTest8_compiled': [SKIP],
'test-run-wasm-simd/RunWasm_ReductionTest16_compiled': [SKIP],
}], # '(arch == mipsel or arch == mips64el or arch == mips or arch == mips64) and not simd_mips'
##############################################################################
['arch == mips or arch == mips64', {
# TODO(mips-team): Implement I64Atomic operations on MIPS
'test-run-wasm-atomics64/*': [SKIP],
}], # 'arch == mipsel or arch == mips64el or arch == mips or arch == mips64'
##############################################################################
['arch == mips64el or arch == mipsel', {
# TODO(mips-team): support concurrent patching of jump table.
'test-jump-table-assembler/*': [SKIP],
}], # 'arch == mips64el or arch == mipsel'
##############################################################################
['mips_arch_variant == r6', {
# For MIPS[64] architecture release 6, fusion multiply-accumulate instructions
# will cause failures on several tests that expect exact floating-point
# results.
'test-run-machops/RunFloat64MulAndFloat64Add1': [SKIP],
'test-run-machops/RunFloat64MulAndFloat64Add2': [SKIP],
'test-run-machops/RunFloat64MulAndFloat64Sub1': [SKIP],
'test-run-machops/RunFloat64MulAndFloat64Sub2': [SKIP],
}], # 'mips_arch_variant == r6'
##############################################################################
['arch == android_arm or arch == android_ia32', {
# Tests crash as there is no /tmp directory in Android.
'test-log/LogAccessorCallbacks': [SKIP],
'test-log/LogCallbacks': [SKIP],
'test-log/ProfLazyMode': [SKIP],
}], # 'arch == android_arm or arch == android_ia32'
##############################################################################
['system == android', {
# Uses too much memory.
'test-api/NewStringRangeError': [SKIP],
}], # 'system == android'
##############################################################################
['system != android and arch in [arm, arm64] and not simulator_run', {
# Consumes too much memory on ODROIDs in debug mode and optimize_for_size.
'test-code-generator/FuzzAssemble*': [PASS, ['(mode == debug) and optimize_for_size', SKIP]],
}], # 'system != android and arch in [arm, arm64] and not simulator_run'
##############################################################################
['system == aix or (arch == ppc64 and byteorder == big)', {
# TODO(ppc): Fix for platforms with function desciptors.
'test-run-machops/RunComputedCodeObject' : [SKIP],
'test-run-wasm-module/Run_WasmModule_Return114' : [SKIP],
'test-run-wasm-module/Run_WasmModule_CallAdd' : [SKIP],
'test-run-wasm-module/Run_WasmModule_CallMain_recursive' : [SKIP],
# TODO(ppc): Implement load/store reverse byte instructions
'test-run-wasm-simd/RunWasmCompiled_SimdLoadStoreLoad': [SKIP],
'test-run-wasm-simd/RunWasm_SimdLoadStoreLoad': [SKIP],
'test-run-wasm-simd/RunWasm_SimdLoadStoreLoad_turbofan': [SKIP],
}], # 'system == aix or (arch == ppc64 and byteorder == big)'
Contribution of PowerPC port (continuation of 422063005) - currency Contribution of PowerPC port (continuation of 422063005, 817143002, 866843003, and 901083004. This patch updates the ppc directories to make them current with changes in common code, removes the optimization to use the ool constant pool, and excludes tests that don't pass under the ppc simulator given a 240s timeout. Subsequent patches will cover: - remaining optimizations for PPC - remaining AIX changes not resolved by 4.8 compiler (4.8 is only recently available for AIX) - incremental updates required to ppc directories due to platform specific changes made in google repos while we complete the above steps. modified: src/compiler/ppc/code-generator-ppc.cc modified: src/ic/ppc/handler-compiler-ppc.cc modified: src/ppc/assembler-ppc-inl.h modified: src/ppc/assembler-ppc.cc modified: src/ppc/assembler-ppc.h modified: src/ppc/builtins-ppc.cc modified: src/ppc/code-stubs-ppc.cc modified: src/ppc/debug-ppc.cc modified: src/ppc/deoptimizer-ppc.cc modified: src/ppc/frames-ppc.cc modified: src/ppc/frames-ppc.h modified: src/ppc/full-codegen-ppc.cc modified: src/ppc/lithium-codegen-ppc.cc modified: src/ppc/lithium-ppc.cc modified: src/ppc/lithium-ppc.h modified: src/ppc/macro-assembler-ppc.cc modified: src/ppc/macro-assembler-ppc.h modified: test/cctest/cctest.status modified: test/mjsunit/mjsunit.status R=danno@chromium.org, svenpanne@chromium.org BUG= Review URL: https://codereview.chromium.org/965823002 Cr-Commit-Position: refs/heads/master@{#26951}
2015-03-03 07:04:41 +00:00
##############################################################################
['arch == ppc and simulator_run or arch == ppc64 and simulator_run', {
Contribution of PowerPC port (continuation of 422063005) - currency Contribution of PowerPC port (continuation of 422063005, 817143002, 866843003, and 901083004. This patch updates the ppc directories to make them current with changes in common code, removes the optimization to use the ool constant pool, and excludes tests that don't pass under the ppc simulator given a 240s timeout. Subsequent patches will cover: - remaining optimizations for PPC - remaining AIX changes not resolved by 4.8 compiler (4.8 is only recently available for AIX) - incremental updates required to ppc directories due to platform specific changes made in google repos while we complete the above steps. modified: src/compiler/ppc/code-generator-ppc.cc modified: src/ic/ppc/handler-compiler-ppc.cc modified: src/ppc/assembler-ppc-inl.h modified: src/ppc/assembler-ppc.cc modified: src/ppc/assembler-ppc.h modified: src/ppc/builtins-ppc.cc modified: src/ppc/code-stubs-ppc.cc modified: src/ppc/debug-ppc.cc modified: src/ppc/deoptimizer-ppc.cc modified: src/ppc/frames-ppc.cc modified: src/ppc/frames-ppc.h modified: src/ppc/full-codegen-ppc.cc modified: src/ppc/lithium-codegen-ppc.cc modified: src/ppc/lithium-ppc.cc modified: src/ppc/lithium-ppc.h modified: src/ppc/macro-assembler-ppc.cc modified: src/ppc/macro-assembler-ppc.h modified: test/cctest/cctest.status modified: test/mjsunit/mjsunit.status R=danno@chromium.org, svenpanne@chromium.org BUG= Review URL: https://codereview.chromium.org/965823002 Cr-Commit-Position: refs/heads/master@{#26951}
2015-03-03 07:04:41 +00:00
# Pass but take too long with the simulator.
'test-api/Threading*': [PASS, SLOW],
'test-api/ExternalArrays': [PASS, SLOW],
Contribution of PowerPC port (continuation of 422063005) - currency Contribution of PowerPC port (continuation of 422063005, 817143002, 866843003, and 901083004. This patch updates the ppc directories to make them current with changes in common code, removes the optimization to use the ool constant pool, and excludes tests that don't pass under the ppc simulator given a 240s timeout. Subsequent patches will cover: - remaining optimizations for PPC - remaining AIX changes not resolved by 4.8 compiler (4.8 is only recently available for AIX) - incremental updates required to ppc directories due to platform specific changes made in google repos while we complete the above steps. modified: src/compiler/ppc/code-generator-ppc.cc modified: src/ic/ppc/handler-compiler-ppc.cc modified: src/ppc/assembler-ppc-inl.h modified: src/ppc/assembler-ppc.cc modified: src/ppc/assembler-ppc.h modified: src/ppc/builtins-ppc.cc modified: src/ppc/code-stubs-ppc.cc modified: src/ppc/debug-ppc.cc modified: src/ppc/deoptimizer-ppc.cc modified: src/ppc/frames-ppc.cc modified: src/ppc/frames-ppc.h modified: src/ppc/full-codegen-ppc.cc modified: src/ppc/lithium-codegen-ppc.cc modified: src/ppc/lithium-ppc.cc modified: src/ppc/lithium-ppc.h modified: src/ppc/macro-assembler-ppc.cc modified: src/ppc/macro-assembler-ppc.h modified: test/cctest/cctest.status modified: test/mjsunit/mjsunit.status R=danno@chromium.org, svenpanne@chromium.org BUG= Review URL: https://codereview.chromium.org/965823002 Cr-Commit-Position: refs/heads/master@{#26951}
2015-03-03 07:04:41 +00:00
}], # 'arch == ppc64 and simulator_run'
##############################################################################
['arch == ppc or arch == ppc64 or arch == s390 or arch == s390x', {
# TODO(ppc/s390): support concurrent patching of jump table
'test-jump-table-assembler/*': [SKIP],
}], # 'arch == ppc or arch == ppc64 or arch == s390 or arch == s390x'
['arch == ppc64', {
# https://crbug.com/v8/8766
'test-bytecode-generator/WideRegisters': [SKIP],
}],
##############################################################################
['variant == stress_incremental_marking', {
'test-heap-profiler/SamplingHeapProfiler': [SKIP],
}], # variant == stress_incremental_marking
##############################################################################
# The test relies on deterministic compilation.
['variant == stress_js_bg_compile_wasm_code_gc', {
'test-compiler/DecideToPretenureDuringCompilation': [SKIP],
}], # variant == stress_js_bg_compile_wasm_code_gc
##############################################################################
['variant == no_wasm_traps', {
'test-accessors/*': [SKIP],
'test-api-interceptors/*': [SKIP],
'test-api-stack-traces/*': [SKIP],
'test-api/*': [SKIP],
'test-bignum-dtoa/*': [SKIP],
'test-cpu-profiler/*': [SKIP],
'test-debug/*': [SKIP],
'test-global-handles/*': [SKIP],
'test-heap-profiler/*': [SKIP],
'test-heap/*': [SKIP],
'test-inobject-slack-tracking/*': [SKIP],
'test-lockers/*': [SKIP],
'test-run-machops/*': [SKIP],
'test-serialize/*': [SKIP],
'test-strings/*': [SKIP],
'test-field-type-tracking/*': [SKIP],
'test-parsing/*': [SKIP],
'test-page-promotion/*': [SKIP],
'test-decls/*': [SKIP],
'test-log/*': [SKIP],
'test-gap-resolver/*': [SKIP],
'test-dtoa/*': [SKIP],
}], # variant == no_wasm_traps
##############################################################################
# The stack unwinder API is only supported on x64.
['arch != x64', {
'test-unwinder/*': [SKIP]
}],
Reland "V8 x64 backend doesn't emit ABI compliant stack frames" This is a reland of 3cda21de77d098a612eadf44d504b188a599c5f0 Original change's description: > V8 x64 backend doesn't emit ABI compliant stack frames > > On 64 bit Windows, the OS stack walking does not work because the V8 x64 > backend doesn't emit unwinding info and also because it doesn't emit ABI > compliant stack frames. See > https://docs.google.com/document/d/1-wf50jFlii0c_Pr52lm2ZU-49m220nhYMrHDi3vXnh0/edit > for more details. > > This problem can be fixed by observing that V8 frames usually all have the same > prolog and epilog: > > push rbp, > mov rbp, rsp > ... > pop rbp > ret N > > and that it is possible to define XDATA (UNWIND_CODEs) that specify how Windows > should walk through V8 frames. Furthermore, since V8 Code objects are all > allocated in the same code-range for an Isolate, it is possible to register a > single PDATA/XDATA entry to cover stack walking for all the code generated > inside that code-range. > > This PR contains changes required to enable stack walking on Win64: > > EmbeddedFileWriter now adds assembler directives to the builtins > snapshot source file (embedded.cc) to emit additional entries in the .pdata and > in the .xdata section of the V8 executable. This takes care of stack walking > for embedded builtins. (The case of non-embedded builtins is not supported). > The x64 Assembler has been modified to collect the information required to emit > this unwind info for builtins. > > Stack walking for jitted code is handled is Isolate.cpp, by registering > dynamically PDATA/XDATA for the whole code-range address space every time a new > Isolate is initialized, and by unregistering them when the Isolate is > destroyed. > > Stack walking for WASM jitted code is handled is the same way in > wasm::NativeModule (wasm/wasm-code-manager.cpp). > > It is important to note that Crashpad and Breakpad are already registering > PDATA/XDATA to manage and report unhandled exceptions (but not for embedded > builtins). Since it is not possible to register multiple PDATA entries for the > same address range, a new function is added to the V8 API: > SetUnhandledExceptionCallback() can be used by an embedder to register its own > unhandled exception handler for exceptions that arise in v8-generated code. > V8 embedders should be modified accordingly (code for this is in a separate PR > in the Chromium repository: > https://chromium-review.googlesource.com/c/chromium/src/+/1474703). > > All these changes are experimental, behind: > > the 'v8_win64_unwinding_info' build flag, and > the '--win64-unwinding-info' runtime flag. > > Bug: v8:3598 > Change-Id: Iea455ab6d0e2bf1c556aa1cf870841d44ab6e4b1 > Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1469329 > Reviewed-by: Michael Starzinger <mstarzinger@chromium.org> > Reviewed-by: Jakob Gruber <jgruber@chromium.org> > Reviewed-by: Ulan Degenbaev <ulan@chromium.org> > Commit-Queue: Paolo Severini <paolosev@microsoft.com> > Cr-Commit-Position: refs/heads/master@{#60330} Bug: v8:3598 Change-Id: If988baf7d3e4af165b919d6e54c1ad985f8e25e3 Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1534618 Reviewed-by: Jakob Gruber <jgruber@chromium.org> Reviewed-by: Ulan Degenbaev <ulan@chromium.org> Reviewed-by: Michael Starzinger <mstarzinger@chromium.org> Commit-Queue: Paolo Severini <paolosev@microsoft.com> Cr-Commit-Position: refs/heads/master@{#60581}
2019-04-01 21:43:23 +00:00
##############################################################################
# Windows stack unwinding is only supported on x64.
['arch != x64 or system != windows', {
'test-stack-unwinding-x64/*': [SKIP]
}],
##############################################################################
['lite_mode or variant == jitless', {
# Slow tests
'test-heap/IncrementalMarkingStepMakesBigProgressWithLargeObjects': [SKIP],
# TODO(v8:7777): Re-enable once wasm is supported in jitless mode.
'test-api/WasmI32AtomicWaitCallback': [SKIP],
'test-api/WasmI64AtomicWaitCallback': [SKIP],
'test-api/WasmStreaming*': [SKIP],
'test-c-wasm-entry/*': [SKIP],
'test-jump-table-assembler/*': [SKIP],
'test-run-wasm-64/*': [SKIP],
'test-run-wasm-asmjs/*': [SKIP],
'test-run-wasm-atomics64/*': [SKIP],
'test-run-wasm-atomics/*': [SKIP],
'test-run-wasm-bulk-memory/*': [SKIP],
'test-run-wasm/*': [SKIP],
'test-run-wasm-exceptions/*': [SKIP],
'test-run-wasm-interpreter/*': [SKIP],
'test-run-wasm-js/*': [SKIP],
'test-run-wasm-module/*': [SKIP],
'test-run-wasm-sign-extension/*': [SKIP],
'test-run-wasm-simd/*': [SKIP],
'test-streaming-compilation/*': [SKIP],
'test-wasm-breakpoints/*': [SKIP],
'test-wasm-codegen/*': [SKIP],
'test-wasm-import-wrapper-cache/*': [SKIP],
'test-wasm-interpreter-entry/*': [SKIP],
'test-wasm-serialization/*': [SKIP],
'test-wasm-shared-engine/*': [SKIP],
'test-wasm-stack/*': [SKIP],
'test-wasm-trap-position/*': [SKIP],
'wasm-run-utils/*': [SKIP],
# Tests that generate code at runtime.
'codegen-tester/*': [SKIP],
'test-accessor-assembler/*': [SKIP],
'test-assembler-*': [SKIP],
'test-basic-block-profiler/*': [SKIP],
'test-branch-combine/*': [SKIP],
'test-code-assembler/*': [SKIP],
'test-code-generator/*': [SKIP],
'test-code-stub-assembler/*': [SKIP],
'test-js-context-specialization/*': [SKIP],
'test-multiple-return/*': [SKIP],
'test-regexp/MacroAssemblernativeAtStart': [SKIP],
'test-regexp/MacroAssemblerNativeBackReferenceLATIN1': [SKIP],
'test-regexp/MacroAssemblerNativeBackReferenceUC16': [SKIP],
'test-regexp/MacroAssemblerNativeBackRefNoCase': [SKIP],
'test-regexp/MacroAssemblerNativeBacktrack': [SKIP],
'test-regexp/MacroAssemblerNativeLotsOfRegisters': [SKIP],
'test-regexp/MacroAssemblerNativeRegisters': [SKIP],
'test-regexp/MacroAssemblerNativeSimple': [SKIP],
'test-regexp/MacroAssemblerNativeSimpleUC16': [SKIP],
'test-regexp/MacroAssemblerNativeSuccess': [SKIP],
'test-regexp/MacroAssemblerStackOverflow': [SKIP],
'test-run-bytecode-graph-builder/*': [SKIP],
'test-run-calls-to-external-references/*': [SKIP],
'test-run-deopt/*': [SKIP],
'test-run-intrinsics/*': [SKIP],
'test-run-jsbranches/*': [SKIP],
'test-run-jscalls/*': [SKIP],
'test-run-jsexceptions/*': [SKIP],
'test-run-jsobjects/*': [SKIP],
'test-run-jsops/*': [SKIP],
'test-run-load-store/*': [SKIP],
'test-run-machops/*': [SKIP],
'test-run-native-calls/*': [SKIP],
'test-run-retpoline/*': [SKIP],
'test-run-stackcheck/*': [SKIP],
'test-run-tail-calls/*': [SKIP],
'test-run-unwinding-info/*': [SKIP],
'test-run-variables/*': [SKIP],
'test-torque/*': [SKIP],
'test-macro-assembler-x64/EmbeddedObj': [SKIP],
# Field representation tracking is disabled in jitless mode.
'test-field-type-tracking/*': [SKIP],
# Instruction cache flushing is disabled in jitless mode.
'test-icache/*': [SKIP],
}], # lite_mode or variant == jitless
##############################################################################
['lite_mode', {
# TODO(v8:8510): Tests that currently fail with lazy source positions.
'test-cpu-profiler/Inlining2': [SKIP],
# TODO(mythria): Code logging tests that currently fail with lazy feedback
# allocation. Fix logging to work without feedback vectors and enable these
# tests in lite_mode.
'test-log/ExternalCodeEventListenerWithInterpretedFramesNativeStack': [SKIP],
'test-log/LogInterpretedFramesNativeStack': [SKIP],
'test-log/LogInterpretedFramesNativeStackWithSerialization': [SKIP],
'test-serialize/CodeSerializerOnePlusOneWithInterpretedFramesNativeStack': [SKIP]
}], # lite_mode
##############################################################################
['variant == jitless', {
# https://crbug.com/v8/7777
'serializer-tester/SerializeCallAnyReceiver': [SKIP],
'serializer-tester/SerializeCallArguments': [SKIP],
'serializer-tester/SerializeCallProperty': [SKIP],
'serializer-tester/SerializeCallProperty2': [SKIP],
'serializer-tester/SerializeCallUndefinedReceiver': [SKIP],
'serializer-tester/SerializeCallUndefinedReceiver2': [SKIP],
'serializer-tester/SerializeCallWithSpread': [SKIP],
'serializer-tester/SerializeConstruct': [SKIP],
'serializer-tester/SerializeConstructWithSpread': [SKIP],
'serializer-tester/SerializeInlinedClosure': [SKIP],
'serializer-tester/SerializeInlinedFunction': [SKIP],
'test-api/TurboAsmDisablesDetach': [SKIP],
'test-cpu-profiler/TickLinesOptimized': [SKIP],
'test-heap/TestOptimizeAfterBytecodeFlushingCandidate': [SKIP],
'test-run-wasm-exceptions/RunWasmInterpreter_TryCatchCallDirect': [SKIP],
'test-run-wasm-exceptions/RunWasmInterpreter_TryCatchCallExternal': [SKIP],
'test-run-wasm-exceptions/RunWasmInterpreter_TryCatchCallIndirect': [SKIP],
'test-run-wasm-exceptions/RunWasmInterpreter_TryCatchThrow': [SKIP],
'test-run-wasm-exceptions/RunWasmInterpreter_TryCatchTrapTypeError': [SKIP],
'test-run-wasm-exceptions/RunWasmLiftoff_TryCatchCallDirect': [SKIP],
'test-run-wasm-exceptions/RunWasmLiftoff_TryCatchCallExternal': [SKIP],
'test-run-wasm-exceptions/RunWasmLiftoff_TryCatchCallIndirect': [SKIP],
'test-run-wasm-exceptions/RunWasmLiftoff_TryCatchThrow': [SKIP],
'test-run-wasm-exceptions/RunWasmLiftoff_TryCatchTrapTypeError': [SKIP],
'test-run-wasm-exceptions/RunWasmTurbofan_TryCatchCallDirect': [SKIP],
'test-run-wasm-exceptions/RunWasmTurbofan_TryCatchCallExternal': [SKIP],
'test-run-wasm-exceptions/RunWasmTurbofan_TryCatchCallIndirect': [SKIP],
'test-run-wasm-exceptions/RunWasmTurbofan_TryCatchThrow': [SKIP],
'test-run-wasm-exceptions/RunWasmTurbofan_TryCatchTrapTypeError': [SKIP],
# --interpreted-frames-native-stack tests
'test-log/ExternalCodeEventListenerWithInterpretedFramesNativeStack': [SKIP],
'test-log/LogInterpretedFramesNativeStack': [SKIP],
'test-log/LogInterpretedFramesNativeStackWithSerialization': [SKIP],
'test-serialize/CodeSerializerOnePlusOneWithInterpretedFramesNativeStack': [SKIP],
# Crashes on native arm.
'test-macro-assembler-arm/ExtractLane': [PASS, ['arch == arm and not simulator_run', SKIP]],
'test-macro-assembler-arm/LoadAndStoreWithRepresentation': [PASS, ['arch == arm and not simulator_run', SKIP]],
'test-macro-assembler-arm/ReplaceLane': [PASS, ['arch == arm and not simulator_run', SKIP]],
}], # variant == jitless
##############################################################################
['variant == jitless and not embedded_builtins', {
'*': [SKIP],
}], # variant == jitless and not embedded_builtins
]