http://sourceware.org/ml/libc-alpha/2013-08/msg00098.html
The existing strnlen code has a number of defects, so this patch is more
than just adding little-endian support. The changes here are similar to
those for memchr.
* sysdeps/powerpc/powerpc64/power7/strnlen.S (strnlen): Add
little-endian support. Remove unnecessary "are we done" tests.
Handle "s" wrapping around zero and extremely large "size".
Correct main loop count. Handle single left-over word from main
loop inline rather than by using small_loop. Correct comments.
Delete "zero" tail, use "end_max" instead.
* sysdeps/powerpc/powerpc32/power7/strnlen.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00097.html
This is the first of nine patches adding little-endian support to the
existing optimised string and memory functions. I did spend some
time with a power7 simulator looking at cycle by cycle behaviour for
memchr, but most of these patches have not been run on cpu simulators
to check that we are going as fast as possible. I'm sure PowerPC can
do better. However, the little-endian support mostly leaves main
loops unchanged, so I'm banking on previous authors having done a
good job on big-endian.. As with most code you stare at long enough,
I found some improvements for big-endian too.
Little-endian support for strlen. Like most of the string functions,
I leave the main word or multiple-word loops substantially unchanged,
just needing to modify the tail.
Removing the branch in the power7 functions is just a tidy. .align
produces a branch anyway. Modifying regs in the non-power7 functions
is to suit the new little-endian tail.
* sysdeps/powerpc/powerpc64/power7/strlen.S (strlen): Add little-endian
support. Don't branch over align.
* sysdeps/powerpc/powerpc32/power7/strlen.S: Likewise.
* sysdeps/powerpc/powerpc64/strlen.S (strlen): Add little-endian support.
Rearrange tmp reg use to suit. Comment.
* sysdeps/powerpc/powerpc32/strlen.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00090.html
This patch fixes symbol versioning in setjmp/longjmp. The existing
code uses raw versions, which results in wrong symbol versioning when
you want to build glibc with a base version of 2.19 for LE.
Note that the merging the 64-bit and 32-bit versions in novmx-lonjmp.c
and pt-longjmp.c doesn't result in GLIBC_2.0 versions for 64-bit, due
to the base in shlib_versions.
* sysdeps/powerpc/longjmp.c: Use proper symbol versioning macros.
* sysdeps/powerpc/novmx-longjmp.c: Likewise.
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/mcount.c: Likewise.
* sysdeps/powerpc/powerpc32/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc64/setjmp.S: Likewise.
* nptl/sysdeps/unix/sysv/linux/powerpc/pt-longjmp.c: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00089.html
Little-endian fixes for setjmp/longjmp. When writing these I noticed
the setjmp code corrupts the non volatile VMX registers when using an
unaligned buffer. Anton fixed this, and also simplified it quite a
bit.
The current code uses boilerplate for the case where we want to store
16 bytes to an unaligned address. For that we have to do a
read/modify/write of two aligned 16 byte quantities. In our case we
are storing a bunch of back to back data (consective VMX registers),
and only the start and end of the region need the read/modify/write.
[BZ #15723]
* sysdeps/powerpc/jmpbuf-offsets.h: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: Correct
_dl_hwcap access for little-endian.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise. Don't
destroy vmx regs when saving unaligned.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Correct CR load.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Likewise CR save. Don't
destroy vmx regs when saving unaligned.
The pointer guard used for pointer mangling was not initialized for
static applications resulting in the security feature being disabled.
The pointer guard is now correctly initialized to a random value for
static applications. Existing static applications need to be
recompiled to take advantage of the fix.
The test tst-ptrguard1-static and tst-ptrguard1 add regression
coverage to ensure the pointer guards are sufficiently random
and initialized to a default value.
This patch fixes backtrace for PPC32 and PPC64 to correctly handle
signal trampolines. The 'debug/tst-backtrace6.c' also check for
SA_SIGINFO handling, where is triggers another vDSO symbols for PPC32.
Resolves: #15465
The program name may be unavailable if the user application tampers
with argc and argv[]. Some parts of the dynamic linker caters for
this while others don't, so this patch consolidates the check and
fallback into a single macro and updates all users.
This patch fix the 3c0265394d commits
by correctly setting minimum architecture for modf PPC optimization
to power5+ instead of power5 (since only on power5+ round/ceil will
be inline to inline assembly).
The branch prediction hints is actually hurts performance in this case.
The assembly implementation make two assumptions: 1. 'fabs (x) < 2^52'
is unlikely and 2. 'x > 0.0' is unlike (if 1. is true). Since it a
general floating point function, expected input is not bounded and then
it is better to let the hardware handle the branches.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_ceil.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_finite.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_floor.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_frexp.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_isinf.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_isnan.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_llround.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_logb.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_lround.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_modf.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_nearbyint.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_remquo.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_rint.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_round.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_scalbln.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_scalbn.c: New file.
* sysdeps/ieee754/ldbl-opt/wordsize-64/s_trunc.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/Implies: Add
ieee754/ldbl-opt/wordsize-64.
* sysdeps/powerpc/powerpc64/Implies: Add
ieee754/dbl-64/wordsize-64.
Initially based on the versions found in wcsmbs/* ; these files have
been changed by hand unrolling, and adding some additional variables
to allow some read-ahead to occur, which then relieves some of the
wait-for-increment/wait-for-load/wait-for-compare-results pressure
that was slowing down every iteration through the while-loop.
For 64-bit Power7, These changes give an approx 20% throughput boost
for the wcschr and wcsrchr functions; and approx 40% boost for the
wcscpy function. 32-bit improvements appear to be slightly better
with ~ %30 and ~ %45 respectively. Results for Power6 closely match
those for power7.
Assorted tweaking, twisting and tuning to squeeze a few additional cycles
out of the memchr code. Changes include bypassing the shift pairs
(sld,srd) when they are not required, and unrolling the small_loop that
handles short and trailing strings.
Per scrollpipe data measuring aligned strings for 64-bit, these changes
save between five and eight cycles (9-13% overall) for short strings (<32),
Longer aligned strings see slight improvement of 1-3% due to bypassing the
shifts and the instruction rearranging.
In the past the "-ftree-loop-linear" switch provided a measurable
improvement in performance for certain functions. At some point it
was assigned as the responsibility of Graphite in GCC. It has been
found that even with Graphite enabled these flags no longer perform
any appreciable improvement over the baseline.
Graphite now has some open bugs which need to be fixed in order for it
to provide measurable performance improvements but it lacks active
development. As a result some compiler distributors may disable
Graphite. If Graphite is disabled then building GLIBC will fail if
the "-ftree-loop-linear" switch is used.
This patch removes the use of "-ftree-loop-linear" as unnecessary.
This patch provides optimized logb (1.2x on PPC32 and 2.5x on PPC64),
logbf (1.1x on PPC32 and 2.2x on PPC64), and logbl (1.3x on PPC32 and
50% on PPC64) for the POWER7 processor.
* sysdeps/powerpc/powerpc32/crti.S: New file.
* sysdeps/powerpc/powerpc32/crtn.S: New file.
* sysdeps/powerpc/powerpc64/crti.S: New file.
* sysdeps/powerpc/powerpc64/crtn.S: New file.
This patch tries to organize the implies files for ppc, since there are
a number of processors and most of them are compatible with each other
(backwards compatible).
Having in mind that we start the search for processor-specific files in
the sysdeps/unix/sysv/linux tree
(sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]/fpu to be
exact), we would like to grab any linux-specific code from that tree
prior to going through the other tree (sysdeps/powerpc/...).
For that, i removed the Implies files that were originally inside the
fpu directories and placed then in the non-fpu directories (still inside
the unix/sysv/linux tree). If no processor-specific/linux-specific files
could be found, we "imply" the other tree's (sysdeps/powerpc/...) fpu
directory for that specific processor AND also the non-fpu directory for
that same tree.
If, again, no processor-specific code is found, we read another Implies
file that will point to the most compatible processor that we should
grab code from, and so on, until we reach the power4 processor.
So, in summary, the Implies files will live inside these directories
now:
* sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]
* sysdeps/powerpc/powerpc[32|64]/[processor]
Practical example of the order we will use to pick power6-specific code
with the new structure.
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power5+/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5+ ->
sysdeps/powerpc/powerpc[32|64]/power5/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5 ->
sysdeps/powerpc/powerpc[32|64]/power4/fpu ->
sysdeps/powerpc/powerpc[32|64]/power4 (from here, it'll go to the
generic path as usual)
I've just committed STT_GNU_IFUNC ppc/ppc64 support into prelink,
and this patch is needed on the glibc side. Without it ld.so segfaults,
as in dl-conflict.c sym_map is always NULL. While dl-machine.h could use
RESOLVE_CONFLICT_FIND_MAP macro to compute it, it doesn't make sense,
because with prelink we know it is already properly relocated (all relative
relocations are applied by prelink).
* sysdeps/powerpc/powerpc32/fpu/s_lround.S (__lround): Fixed erroneous
result when x is +/-nextafter(+/-0.5,-/+1) i.e. all 1's in the
mantissa.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S (__llround):
Likewise. Also account for when x is an odd number between 2^52
and 2^53-1.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf): Likewise.
* math/libm-test.inc (lround_test, llround_test): Added test cases to
detect aforementioned erroneous conditions.
2008-01-24 Steven Munroe <sjmunroe@us.ibm.com>
[BZ #5741]
* sysdeps/powerpc/powerpc64/dl-machine.h (PPC_DCBT, PPC_DCBF):
Define additonal Data Cache Block instruction macros.
(elf_machine_fixup_plt): Add dcbt for opd and plt entries.
Replace dcbst with dcbf and sync with sync/isync.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h: New file.
* sysdeps/powerpc/powerpc64/hp-timing.h [_ARCH_PWR4] (HP_TIMING_NOW):
For ISA 2.01 and later replace mftb with mfspr 268.
* sysdeps/i386/i686/memcpy.S: Optimize copying of equally aligned
buffers.
* sysdeps/powerpc/powerpc32/power5/fpu/s_isnanf.S: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnanf.S: New file.
* sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc32/power5/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/970/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power6/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/970/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power4/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power5/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power5+/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6x/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/970/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power4/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power5/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power5+/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6x/fpu/Implies:
New file.
2007-05-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrintf.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llround.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llroundf.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S: To here.
2007-05-22 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
2007-05-21 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/fpu/slowexp.c: New file.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/slowexp.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/w_sqrt.c: New file.
2007-03-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S
[LONG_DOUBLE_COMPAT]: Add compat_symbol for llrintl@@GLIBC_2_1.
2006-02-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llroundf.S: New File
2006-10-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/fpu/slowpow.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/slowpow.c: New file.
2006-10-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llroundf.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/Makefile: Moved.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/mpa.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/Makefile: To here.
* sysdeps/powerpc/powerpc32/power4/fpu/mpa.c: Likewise.
2006-09-29 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: New file.
2006-09-28 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llroundf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/Implies: New file.
2006-08-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/Makefile: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/mpa.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/Makefile: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/mpa.c: New file.
2006-06-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: New file.
2006-03-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrintf.S: New file.
2007-06-01 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/memset.S: New file.
* sysdeps/powerpc/powerpc64/power6/memset.S: New file.
2007-05-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/970/Implies: New file.
* sysdeps/powerpc/powerpc32/power5/Implies: New file.
* sysdeps/powerpc/powerpc32/power5+/Implies: New file.
* sysdeps/powerpc/powerpc32/power6/Implies: New file.
* sysdeps/powerpc/powerpc32/power6x/Implies: New file.
* sysdeps/powerpc/powerpc64/970/Implies: New file.
* sysdeps/powerpc/powerpc64/power5/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/Implies: New file.
* sysdeps/powerpc/powerpc64/power6/Implies: New file.
* sysdeps/powerpc/powerpc64/power6x/Implies: New file.
2007-05-21 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/memset.S: New file
2007-03-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/memcpy.S: Improve aligned loop to minimize
branch miss-predicts. Ensure that cache line crossing does not impact
dispatch grouping.
2006-12-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/power4/memcopy.h: Replace with include
"../../powerpc32/power4/memcopy.h".
* sysdeps/powerpc/powerpc64/power4/wordcopy.c: Replace with include
"../../powerpc32/power4/wordcopy.c".
2006-10-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/Makefile: Moved.
* sysdeps/powerpc/powerpc32/powerpc64/memcopy.h: Likewise.
* sysdeps/powerpc/powerpc32/powerpc64/wordcopy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/Makefile: To here.
* sysdeps/powerpc/powerpc32/power4/memcopy.h: Likewise.
* sysdeps/powerpc/powerpc32/power4/wordcopy.c: Likewise.
2006-09-10 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/memcpy.S: New file.
2006-08-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/wordcopy.c: New file.
* sysdeps/powerpc/powerpc32/powerpc64/Makefile: New file.
* sysdeps/powerpc/powerpc32/powerpc64/memcopy.h: New file.
* sysdeps/powerpc/powerpc32/powerpc64/wordcopy.c: New file.
* sysdeps/powerpc/powerpc64/power4/Makefile: New file.
* sysdeps/powerpc/powerpc64/power4/memcopy.h: New file.
* sysdeps/powerpc/powerpc64/power4/wordcopy.c: New file.
* sysdeps/powerpc/powerpc64/power6/wordcopy.c: New file.
2006-07-06 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/power6/memcpy.S: New file.
2006-03-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/memcmp.S: New file.
* sysdeps/powerpc/powerpc32/power4/memcpy.S: New file.
* sysdeps/powerpc/powerpc32/power4/memset.S: New file.
* sysdeps/powerpc/powerpc32/power4/strncmp.S: New file.
* sysdeps/powerpc/powerpc64/power4/memcmp.S: New file.
* sysdeps/powerpc/powerpc64/power4/memcpy.S: New file.
* sysdeps/powerpc/powerpc64/power4/strncmp.S: New file.
* math/gen-libm-test.pl (parse_args): Take function name for pretty
output as an argument.
(generate_testfile): Pass it the name given in the START macro.
[BZ #2466]
* math/libm-test.inc (llrint_test, llround_test): Fix last change to
protect large-precision cases with [LDBL_MANT_DIG > 100].
(llrint_test_tonearest, llrint_test_towardzero): Likewise.
(llrint_test_downward, llrint_test_upward): Likewise.
2006-03-15 Steven Munroe <sjmunroe@us.ibm.com>
Alan Modra <amodra@bigpond.net.au>
[BZ #2466]
* math/libm-test.inc (llrint_test, llround_test) [TEST_LDOUBLE]:
Add new test values.
(llrint_test_tonearest, llrint_test_towardzero, llrint_test_downward,
llrint_test_upward): New functions.
(main): Call them.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c (__llrintl): Handle
rounding that spans doubles in IBM long double format.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c (__llroundl): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llrintl.S: Removed.
* sysdeps/powerpc/powerpc64/fpu/s_llroundl.S: Removed.
* sysdeps/powerpc/powerpc64/fpu/s_lrintl.S: Removed.
* sysdeps/powerpc/powerpc64/fpu/s_lroundl.S: Removed.
2006-03-16 Roland McGrath <roland@redhat.com>
of non-volatile floating-point registers to the stack (fp14-fp31).
* sysdeps/powerpc/powerpc32/gprsave0.S: Add cfi_offset for spilling of
non-volatile general-purpose registers to the stack (gpr13-gpr31).
* sysdeps/powerpc/powerpc64/dl-trampoline.S: Add cfi_offset
for non-volatiles gpr30 - grp31 spilled to the stack.
* sysdeps/powerpc/powerpc64/memcpy.S: Add cfi_offset for non-volatile
gpr31 spill to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S:
Add cfi_offset for non-volatile gpr31 spill to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Add cfi_offset
for non-volatiles gpr28 - grp31 spilled to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/getcontext.S: Add
cfi_adjust_cfa_offset when a frame is stacked.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S:
(__novec_setcontext) : Add cfi_offset for non-volatile gpr31 spill
add LR saved to the stack. Add cfi_adjust_cfa_offset when frame is
stacked.
(__setcontext) : Add cfi_offset for non-volatile gpr31 spill to
the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S:
(__novec_swapcontext) : Add cfi_offset for non-volatile gpr31 spill
add LR saved to the stack.
(__swapcontext) : Add cfi_offset for non-volatile gpr31 spill add LR
saved to the stack. Add cfi_adjust_cfa_offset when frame is stacked.
Jakub Jelinek <jakub@redhat.com>
Roland McGrath <roland@redhat.com>
Steven Munroe <sjmunroe@us.ibm.com>
Alan Modra <amodra@bigpond.net.au>
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* math/libm-test.inc (check_float_internal): Allow ulp <= 0.5.
(erfc_test): Don't run erfcl (27.0L) test if erfcl (27.0L) is
denormal.
[TEST_LDOUBLE] (ceil_test, floor_test, llrint_test, llround_test,
rint_test, round_test, trunc_test): Add new tests.
* sysdeps/powerpc/powerpc32/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_ceill.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_floorl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_rintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_roundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_truncl.S: New file.
* sysdeps/unix/sysv/linux/powerpc/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/configure.in: New file.
* sysdeps/unix/sysv/linux/powerpc/configure: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
(__LONG_DOUBLE_MATH_OPTIONAL): Define.
(__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/unix/sysv/linux/powerpc/nldbl-abi.h: New file.
* sysdeps/powerpc/fpu/s_isnan.c: Include math_ldbl_opt.h.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl, lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llroundl, lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* misc/qefgcvt_r.c [LDBL_MIN_10_EXP == -291] (FLOAT_MIN_10_NORM): New.
* sysdeps/powerpc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/powerpc/Implies: Add ieee754/ldbl-128ibm.
* sysdeps/powerpc/powerpc32/Implies: Remove powerpc/soft-fp.
* sysdeps/ieee754/ldbl-128ibm/Makefile: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_asinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atan2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_logl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ieee754.h: New file.
* sysdeps/ieee754/ldbl-128ibm/k_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c: New file.
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h: New file.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/t_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/w_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-128/e_powl.c: Fix old comment.
* sysdeps/powerpc/powerpc64/fpu/e_sqrtf.c: New file.
* sysdeps/powerpc/fpu/bits/mathinline.h (__CPU_HAS_FSQRT): New macro.
(__ieee754_sqrt, __ieee754_sqrtf): Use it.
directive to ENTRY macros.
(END): Add cfi_endproc directive to END macro.
* sysdeps/powerpc/powerpc64/sysdep.h (ENTRY, EALIGN): Add cfi_startproc
directive to ENTRY macros.
(END, END_GEN_TB): Add cfi_endproc directive to END macros.
* sysdeps/powerpc/powerpc32/dl-start.S: Remove ENTRY()s for
_dl_start_user and _dl_main_dispatch.
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: Use END macro.
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: Use Likewise.
* sysdeps/powerpc/powerpc32/gprrest0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprrest1.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave1.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: Remove redundant
cfi_startproc and cfi_endproc.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/socket.S: Likewise.
2006-01-04 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/aio_misc.h (struct waitlist): Add result member.
* sysdeps/pthread/aio_notify.c (__aio_notify): For synchronous waiters,
failed I/O, and a result pointer, set value to -1.
* sysdeps/pthread/aio_suspend.c: Initialize result pointer to NULL.
* sysdeps/pthread/lio_listio.c: For LIO_WAIT, point result pointer in
wait list to local variable result. If nonzero afterwards, set errno
to EIO. For LIO_NOWAIT set result to NULL.
* rt/Makefile (tests): Add tst-aio8.
* rt/tst-aio8.c: New file.
value doesn't survive in a registers when the function returns.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Define
PTR_MANGLE2.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Define
PTR_MANGLE2 and PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Use PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Use PTR_MANGLE2.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Ulrich Drepper <drepper@redhat.com>
(La_ppc64_retval): Correct size of lrc_fp.
* sysdeps/powerpc/powerpc64/dl-trampoline.S (_dl_profile_resolve):
Fix up ABI problems and complete function.
* intl/dcigettext.c (_nl_find_msg): Add a cast.
* nis/nis_clone_dir.c (nis_clone_directory): Use char * for ADDR.
* nis/nis_clone_obj.c (nis_clone_object): Likewise.
* nis/nis_clone_res.c (nis_clone_result): Likewise.
* resolv/nss_dns/dns-network.c (getanswer_r): Use const unsigned char *
for END_OF_MESSAGE and CP.
* resolv/res_send.c (send_dg): Add else branch for case impossible
unless `poll' is buggy.
* crypt/crypt_util.c (__setkey_r): Add a cast.
* locale/programs/linereader.c (get_toplvl_escape): Use size_t for
NBYTES, and unsigned char * for BYTES.
* locale/programs/charmap.c (charmap_new_char): Use size_t and
unsighed char * for NBYTES, BYTES parameters.
* sysdeps/generic/dl-hash.h (_dl_elf_hash): Take const char * argument
and cast it.
* sysdeps/i386/i686/dl-hash.h (_dl_elf_hash): Likewise.
* sunrpc/create_xid.c (_create_xid): Don't use unsigned long for RES.
* sunrpc/svcauth_des.c (_svcauth_des): Fix cast type.
* sunrpc/auth_des.c (authdes_create): Don't use u_char for PKEY_DATA.
(authdes_marshal): Don't use unsigned int for LEN.
* sunrpc/xdr.c (xdr_hyper): Don't use unsigned long for T2.
(xdr_u_hyper): Likewise.
(xdr_u_short): Don't use u_long for L.
* sunrpc/xdr_intXX_t.c (xdr_int64_t): Don't use uint32_t for T2.
* inet/rexec.c (rexec_af): Use socklen_t.
* sunrpc/key_call.c (getkeyserv_handle): Likewise.
* sunrpc/rtime.c (rtime): Likewise.
* resolv/res_send.c (send_vc, send_dg): Likewise.
* nis/nis_callback.c (__nis_create_callback): Likewise.
* sysdeps/generic/libc-start.c: Use unsigned int for nthreads ptr.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Fix type of ADDR local.
* libio/libio.h (_IO_BE): Add parenthesis around EXPR.
* intl/dcigettext.c (INTVARDEF, INTUSE): Macros removed.
(_nl_default_dirname): Use libc_hidden_data_def instead of INTVARDEF.
(libc_freeres_fn, DCIGETTEXT): Don't use INTUSE.
* intl/bindtextdom.c (INTUSE): Macro removed.
(_nl_default_dirname): Use libc_hidden_proto.
(set_binding_values): Don't use INTUSE.
* include/libintl.h (_libc_intl_domainname_internal): Decl removed.
(_libc_intl_domainname): Use libc_hidden_proto.
* posix/regex_internal.h (gettext): Remove INTUSE on it.
* locale/SYS_libc.c (_libc_intl_domainname): Use libc_hidden_data_def
rather than INTDEF.
* include/libintl.h (_): Don't use *_internal name.
* ctype/ctype-extn.c (__ctype_tolower, __ctype_toupper): Use int32_t,
not uint32_t.
* locale/lc-ctype.c (_nl_postload_ctype): Likewise for assignments.
* iconv/gconv_open.c (__gconv_open): Remove useless cast.
[BZ #721]
* sysdeps/i386/dl-machine.h (ELF_MACHINE_NO_RELA): Define this outside
of [RESOLVE_MAP].
* sysdeps/sh/dl-machine.h (ELF_MACHINE_NO_REL): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
* sysdeps/powerpc/powerpc64/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
2005-02-03 Alexandre Oliva <aoliva@redhat.com>
[BZ #721]
* elf/dynamic-link.h: Don't declare nested auto functions that are
not going to be defined.
2004-07-23 Jakub Jelinek <jakub@redhat.com>
[BZ #284]
* include/features.h (_POSIX_SOURCE, _POSIX_C_SOURCE): Define
if _XOPEN_SOURCE >= 500 even if __STRICT_ANSI__ is defined.
2005-02-16 Roland McGrath <roland@redhat.com>
* sysdeps/powerpc/powerpc64/dl-machine.h
(elf_machine_runtime_setup): If profile != 0 does not anymore mean
GLRO(dl_profile) != NULL.
* sysdeps/powerpc/powerpc64/bits/link.h (struct la_ppc64_regs): Add
padding.
* sysdeps/powerpc/powerpc64/dl-trampoline.S: (_dl_profile_resolve):
Extend _dl_prof_resolve to add pass extra parameters to
_dl_profile_fixup and set up structure with register content.
* sysdeps/powerpc/powerpc32/dl-machine.c (__elf_machine_runtime_setup):
If profile != 0 does not anymore mean GLRO(dl_profile) != NULL.
* sysdeps/powerpc/powerpc32/bits/link.h: Fix types of some fields in
the register and result structures.
* sysdeps/powerpc/powerpc64/bits/link.h: Fix types of some fields
in the 32-bit register and result structures.
* sysdeps/powerpc/powerpc32/dl-trampoline.S (_dl_prof_resolve):
Extend _dl_prof_resolve to add pass extra parameters to
_dl_profile_fixup and set up structure with register content.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Make no_vmx and
aligned_save_vmx symbol local.
* sysdeps/powerpc/powerpc64/bits/atomic.h
(__arch_compare_and_exchange_bool_32_acq): Fix case where oldval
is negative.
(__arch_compare_and_exchange_bool_32_rel): Likewise.
Update.
2004-07-16 Steven Munroe <sjmunroe@us.ibm.com>
[BZ #269]
* setjmp/Makefile (tests): Add bug269-setjmp.
* setjmp/bug269-setjmp.c: New file.
* sysdeps/powerpc/powerpc64/__longjmp-common.S [SHARED && !IS_IN_rtld]:
Store R2 from jmpbuf in callers TOC save area.
* sysdeps/powerpc/powerpc64/bsd-_setjmp.S [SHARED && !IS_IN_rtld]:
Store R2 in TOC save area.
* sysdeps/powerpc/powerpc64/setjmp-common.S [SHARED && !IS_IN_rtld]:
Copy TOC save area from previous frame as R2 (TOC) in jmpbuf.
2004-07-05 Ulrich Drepper <drepper@redhat.com>
* elf/dl-init.c: Don't define and use _dl_starting_up if
HAVE_INLINED_SYSCALLS is defined and the variable is not used.
* elf/dl-support.c: Likewise.
* elf/rtld.c: Likewise.
* elf/dl-misc.c (_dl_debug_vdprintf): Use writev syscall directly
if HAVE_INLINED_SYSCALLS is defined.
* sysdeps/powerpc/powerpc64/dl-machine.h: Don't rest _dl_starting_up
here.
* sysdeps/powerpc/powerpc32/dl-start.S: Likewise.
* sysdeps/unix/sysv/linux/configure.in: Define HAVE_INLINED_SYSCALLS.
* config.h.in: Add entry for HAVE_INLINED_SYSCALLS.
* sysdeps/posix/profil.c: If compiled for ld.so, omit code which
is needed to stop profiling.
* elf/dl-open.c (dl_open_worker): If a newly opened object is to be
profile make sure it cannot be unloaded.
* sysdeps/unix/sysv/linux/dl-origin.c: Inline readlink syscall.
* sysdeps/unix/sysv/linux/fcntl.c: If compiled without cancellation
support, make sure the helper function is inlined.
* sysdeps/unix/sysv/linux/pread.c: Likewise.
* sysdeps/unix/sysv/linux/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/i386/fcntl.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Likewise.
2004-07-05 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/novmx-longjmp.c (__libc_longjmp,
__libc_siglongjmp): Remove symbol_version.
* sysdeps/powerpc/longjmp.c (__libc_longjmp, __libc_siglongjmp):
Export @@GLIBC_PRIVATE, not @@GLIBC_2.3.4.
* sysdeps/powerpc/sigjmp.c (__sigjmp_save): Use strong_alias
unconditionally.
* sysdeps/powerpc/novmx-sigjmp.c (__sigjmp_save): Remove.
* sysdeps/powerpc/powerpc32/__longjmp.S (__longjmp): Use
strong_alias instead of default_symbol_version, remove
symbol_version.
* sysdeps/powerpc/powerpc64/__longjmp.S (__longjmp): Likewise.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S (__novmx__setjmp): Change
into strong_alias to __novmxsetjmp.
(__vmx__setjmp): Similarly with __vmxsetjmp.
(__setjmp): Make it strong_alias to __vmx__setjmp, remove
default_symbol_version and symbol_version.
* sysdeps/powerpc/powerpc64/bsd-setjmp.S (__novmx__setjmp): Change
into strong_alias to __novmxsetjmp.
(__vmx__setjmp): Similarly with __vmxsetjmp.
(__setjmp): Make it strong_alias to __vmx__setjmp, remove
default_symbol_version and symbol_version.
* nscd/nscd_getgr_r.c: Include stdio-common/_itoa.h.
2004-06-17 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/pthread_cond_timedwait.c
(__pthread_cond_timedwait): Also check for negativ nanoseconds.
* sysdeps/unix/sysv/linux/i386/i486/pthread_cond_timedwait.S
(__pthread_cond_timedwait): Check for invalid nanosecond in
timeout value.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S: Likewise.
* tst-cond19.c: New file.
* Makefile: Add rules to build and run tst-cond19.
