The logic here seems faulty. We want to keep
a timestamp that tells us when the glyph was
last used, so always update the timestamp.
And whenever we use a glyph, it turns 'young'
again, so remove it from the old pixels
accounting.
The (MAX_AGE, MAX_AGE+CHECK_INTERVAL) interval
is only relevant to prevent us from turning
a cached glyph old more than once, and that
is already taken care of.
If somebody does a transform like
scale(5) scale(10) translate(1,1) translate(5,0)
store it instead as
scale(50) translate(6,1)
This way, less memory is consumed and transforms are easier to read.
In particular, this simplifies the typical transforms we do in GTK,
which are just one translation after another.
We don't need to just look at the scale of the new modelview matrix, but
at the one we get when multiplying the new one with the current one.
Test case attached.
Use cairo-script-interpreter to parse the scripts that generate cairo
nodes.
This requires libcairoscriptinterpreter.so to work properly, but if
it isn't found we disable this (unimportant for normal functioning)
code and just emits a parser warning.
The testsuite requires it however or it will fail.
A new test is included that tests all of this.
CSS does not do exponents, so printing numbers close to 0 as 1.234e-15
does not work.
Also up the accuracy to 17 digits because that's what everyone else
uses.
We blindly assume everywhere that a single glyph will definitely fit on
one atlas, but that's not always the case.
For now, don't crash or produce GL errors.
Instead of only allowing for glyph indexes, allow ASCII characters as
replacements. So this glyph sequence
glyphs: 65 8, 66 8, 67 8
Can be replaced by
glyphs: "ABC"
provided that the glyph for "A", "B" and "C" are 65, 66 and 67
respectively and their advance is exactly 8.
x offset and y offset must always be 0 and every glyph must start a
cluster.
Update to the docs outlined in #1887.
In particular, the changes do:
1. Require no property, have a working default for everything
2. Be clear about what gets printed and how.
Tests ahve been adapted to still pass.
Base the rewrite on testsuite/css/parser/test-css-parser - we now
require the node file to match a reference node and track the errors it
triggers.
We also no longer use gtester.
When printing, behave the same way as when parsing:
Magically skip a container node if there is one - just like the
parser magically creates a container node to hold all the nodes
it parses.
We can't just pretend we have an identity matrix when we are actually
scaling. This fixes the node editor sometimes not drawing things when
rendering to a texture. We were mistakenly discaring render nodes
because the bounds transformation was wrong.
We stuff both gl-drawn and cairo-drawn textures into the same cache, so
we can't really assume that we need to draw any of them flipped or not.
Fix this by drawing fallback stuff upside down and then using
upside-down vertex data for everything.
Fixes#1897
We don't want to return a GFile because GFile can't handle can't deal
with data: urls.
That makes the code a bit more complicated that doesn't deal with those
URLs, but it makes the other code actually work.
GtkCssImageUrl also now decodes data urls immediately instead of only at
the first load. So don't use data urls if you care about performance.
Instead of encoding the raw data, encode the full image to a PNG.
And instead of stuffing that encoding into a string, use a full
data: url.
And then remove the width and height properties, because they're now
implicitly included in the data.
And then change the parser to match.
And because the parser now parses regular urls on top of data: urls, we
can now load any random file.
Instead of the previous approach using GVariant, this new approach uses
human-readable text files as the serialization format for render nodes.
The format is a custom one, but it is inspired by QML and conforms to
the CSS syntax. Because of that, we can use the CSS machinery from GTK
to parse it, and in particular share code to parse properties that GTK's
CSS machinery also supports, such as colors.
This commit breaks all existing usages of node files - such as the
testsuite and various test tools - they will be fixed in further
commits.
Change the way we compute border color cutoffs to the same method that
browsers use. This method does not consider the corner sizes at all and
only looks at border-width.
Previously, when borders were too big - ie when a 100x100 rect had only
one 100x100 border, like the black part of ◔ - and then shrinking this
rect by 25px on either side, we'd end up with a 50x50 rect with a 75x75
border, and that's obviously not correct.
Floating point values cannot ever be compared for equality. GLib has a
G_APPROX_VALUE macro that lets us compare two value within a provided
precision, so we should use that instead.
Artisanal, homegrown, locally sourced, vegan reference counting has been
replaced by the appropriate API in GLib, which does small things like
saturation and type checking.
Apparently genTextures and friends only "reserves names", initializing
them will actually create them. Using glObjectLabel on textures before
initializing them will throw a GL_INVALID_VALUE error.
When rendering to a texture, collecting the render ops might bind a
different framebuffer, so bind the one we want again before doing the
actual rendering.
This adds debug groups in various places, including the debug
nodes if those are in use. This makes the traces in tools like
renderdoc much easier to read.
GL keeps the unoform state per-program, but not per-frame. So, we can't
pretend that this works for us. Keep the RenderOpBuilder around for the
entire lifetime of the renderer instead.
This fixes rendering to a texture on intel hardware. The glClear calls
would throw a GL_FRAMEBUFFER_INCOMPLETE error here, because the
gsk_gl_driver_begin_frame() call in do_render() reset the framebuffer
object in use.
This fixed the reftest introduced in the previous commit.
I'm using a mesh gradient here instead of drawing 4 individual sides to
avoid artifacts when those sides overlap in rounded corners.
We don't want the new transform while drawing things on a texture.
Instead, only apply the new transform matrix when adding the final
texture drawing ops.
This fixes the stack cube rotation transition to at least look somewhat
better.
When sending render nodes from the client to the daemon we add an id,
and whenever we're about to re-send the entire tree node we instead
send the old id. We track all the nodes for the previous frame
of the surface this way.
Having the id on the daemon side will allow us do to much better deltas.
gsk/gskenums.h:181: Error: Gsk: multiple "@GSK_TRANSFORM_CATEGORY_2D" parameters for identifier "GskTransformCategory":
* @GSK_TRANSFORM_CATEGORY_2D: The matrix is a 2D matrix. This is equivalent
^
gsk/gsktransform.c:1342: Warning: Gsk: gsk_transform_to_2d: unknown parameter 'm' in documentation comment, should be 'self'
gsk/gsktransform.c:1368: Warning: Gsk: gsk_transform_to_2d: invalid return annotation
gsk/gsktransform.c:1461: Warning: Gsk: gsk_transform_to_translate: unknown parameter 'm' in documentation comment, should be 'self'
This reinstates diffing in the same way that it worked for offset nodes.
It would be possible to add diffing for affine transforms or even all
transforms, but I think this is unnecessary right now - and also quite
expensive to compute.
Make the API expect a tranform of the proper category instead of
doing the check ourselves and returning TRUE/FALSE.
The benefit is that the mai use case is switch (transform->category)
statements and in those we know the category and don't need to check
TRUE/FALSE.
Using the wrong matrix will now cause a g_warning().
... instead of computing it every time we need it.
This should be faster and we want to use it a lot more prominently.
Also, we have the struct memory available anyway.
In particular, add a per-category querying API for the matrix:
- gsk_transform_to_translate()
- gsk_transform_to_affine()
- gsk_transform_to_2d()
- gsk_transform_to_matrix()
This way, code can use the relevant one for the given category.
Since we can do partial redraws, dropping every shadow that's been
unused for one frame happens too fast. This is also a problem when a
shadow gets drawn on a texture for a few frames.
This can happen for certain transform nodes. The transform node's
child's bounds are fine, but the transform node bounds are all nan.
Just ignore those bounds since we can't meaningfully render them anyway.
If the given matrix is explicitly of category IDENTITY, we don't need to
do anything, and in the 2D_TRANSLATE case, just offset the child bounds.
Those are the two most common cases.
The code didn't change, it was just shuffled around to make the
with_bounds() versions of the text rendering unnecessary and instead
pass through the generic append_node() path.
They were a neat idea while they lasted. But now, it's time for
categorized transform nodes, where matrices with
GSK_MATRIX_CATEGORY_2D_TRANSLATE are the exact replacement.
Renderers have not been adapted for this purpose, so they (continue to)
run slow paths.
The first set of glyphs is created with a timestamp of 1. Later we
subtract the glyph timestamp from the cache timestamp, meaning we end up
with numbers ending in 9, e.g. 59. Now unfortunately !(60 <= 59), so we
do not end up incrasing the old_pixels count of the cache. Later we then
call lookup() and DEcrease the old_pixels count, which makes the
unsigned int wrap and cause a huge old_pixels value, which causes us to
drop the cache.
The @filename@ directive will use the full path of the file being parsed
for enumeration types; we should use @basename@, instead, as it improves
the reproducibility of the build by using only the file name.
Some of the flags got lost in the meson transition or were demoted from
error flags to warning flags.
This commit reintroduces them.
It also includes fixes for the code that had warnings with those flags.
The big one being -Wshadow.
This broke the overlay blur demoe when resizing the window to a size
that would completely move the image below a button, causing the
GtkSnapshot code to remove the clip node below the blur node.
So we can check that the currently set clip is the first one and now
intersect with it. This first clip is always the entire viewport or the
entire render_area and we don't want to end up drawing things to a
texture because of it.
Instead of getting the translation x/y everytime we use the modelview,
get it once, when extracting the metadata. Do the same with the scale.
And save if the matrix is "simple" at all, i.e. if it only consists of a
translation and/or scale. This will be helpful later when we start
drawing transformed nodes on textures.
