Passing a constructor as second argument to foreach didn't work when
building with gcc.
For MSVC this already worked as a different foreach implementation is
used.
Change-Id: Id98444c699b4cebc14ea62076c5f7cba33ffb824
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The RGBA8888 formats was incorrectly using the qt_gradient_quint32
which is argb specific. This caused vertical gradients but only
vertical gradients to be drawn incorrectly.
This changes the RGBA8888 formats formats to use the generic gradient
method and renames qt_gradient_quint32 to qt_gradient_argb32 to
indicate its limitation.
Change-Id: Ia1cd48ca7f4f78b64f31d6263e81cd8ac3b0954e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
The debug output of all categories will be visible by default,
except from the "qt.*" categories. "qt.*" categories are private
and their default debug output will be hidden.
[ChangeLog][QtCore][Logging] Enable qCDebug's for all categories except qt one's
Change-Id: Ibe147c8bbe0835a63b3de782288b9c3251321d8f
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
private api, but useful for 2d gui code that suddenly finds itself
needing to get a set of textures onto some fbo
I didn't want to include ARB_copy_image since it looks like its from
texture/renderbuffer -> texture/renderbuffer while this class implies
texture -> write fbo. We could wrap ARB_copy_image in QOpenGLTexture or
some other class or we can add it later.
I have not added any QOpenGLTexture functions since this class opperates
on the GLuint identifier. We can add overloads later.
Change-Id: I3e565b33466c1c183a249a33c3e82c6786debd55
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The basedir xdg spec says:
"All paths set in these environment variables must be absolute.
If an implementation encounters a relative path in any of these variables it
should consider the path invalid and ignore it."
Therefore we ignore relative paths including the empty string.
Change-Id: I8f779b78981018051b16de23b2514f2e62b7ab39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QScreen::grabWindow() is not always reliable because it grabs from the
framebuffer. (The window might then be covered by other windows, e.g.
"Stays on top"-Windows, popups etc).
If QScreen::grabWindow() fails we therefore fallback to
QWidget::grab(). This will not grab from the frame buffer, but it will
ask the widget to render itself (with its current state) to a pixmap
and return it.
QWidget::grab() should usually return the expected pixmap, and the
pixmap it gives is not subject to the state of the window manager.
This means that both QScreen::grabWindow() *and* QWidget::grab()
must produce an unexpected pixmap in order for the test to fail.
Change-Id: I276554155bb1e5b510d2a2d43628d91669464fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Code units 0xD800 .. 0xDFFF are not UCS-4, so we can't happily return them.
Instead, if we encounter a stray surrogate, replace it with 0xFFFD, which
is what Unicode recommends anyhow.
References:
§3.9 Unicode Encoding Forms
D76: Unicode scalar value: Any Unicode code point except high-surrogate
and low surrogate code points.
As a result of this definition, the set of Unicode scalar values consists
of the ranges 0 to D7FF_16 and E000_16 to 10FFFF_16, inclusive.
[...]
UTF-32 encoding form: The Unicode encoding form that assigns each Unicode
scalar value to a single unsigned 32-bit code unit with the same numeric
value as the Unicode scalar value.
§ C.2 Encoding Forms in ISO/IEC 10646
UCS-4. UCS-4 stands for “Universal Character Set coded in 4 octets.” It is
now treated simply as a synonym for UTF-32, and is considered the canonical
form for representation of characters in 10646.
§ 3.9 Unicode Encoding Forms (Best Practices for Using U+FFFD)
and
§ 5.22 Best Practice for U+FFFD Substitution
Whenever an unconvertible offset is reached during conversion of a code
unit sequence:
1. The maximal subpart at that offset should be replaced by a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
maximal subpart.
[...]
Whenever an unconvertible offset is reached during conversion of a code
unit sequence to Unicode:
1. Find the longest code unit sequence that is the initial subsequence of
some sequence that could be converted. If there is such a sequence, replace
it with a single U+FFFD; otherwise replace a single code unit with a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
subsequence which has been replaced.
[ChangeLog][QtCore][QString] QString::toUcs4 now does not return invalid
UCS-4 code units belonging to the surrogate range (U+D800 to U+DFFF)
when the QString contains malformed UTF-16 data. Instead, U+FFFD
is returned in place of the malformed subsequence.
Change-Id: I19d7af03e749fea680fd5d9635439bc9d56558a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That commit made QString::toXxx (8-bit) functions use C++11 ref
qualifiers, so we need to match it here.
Change-Id: I45b50464d36f858d012b12e0cb511aae347ddb6f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
UCS-4 iterator over a QString.
Kept private for now so we can still work on the API.
Done-with: Thiago
Change-Id: I377f8bb1921e591ee3292c08c3e097fb6bc7f0c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because they make sense. I'm even thinking that the char16_t version
should get a QString implicit constructor. Maybe both encodings.
Change-Id: Ifffc61dd890795fbbbd5f7cb5efb3e6287d1270e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Showing, moving and resizing
Contrarily to what an NSWindow does to its NSViews, child NSWindows need
to be explicitly shown and hidden, and clipped if the parent NSWindow
changes geometry. Also, hiding an NSWindow will not hide its child
windows. This needed to be managed manually, adding 2 additional states
to QCocoaWindow to reflect whether a child window has been clipped out by
any ancestor geometry change, or hidden by any ancestor being hid. Also,
ordering out an NSWindow will remove it fromm its parent's child windows
array, making necessary to maintain a parallel list of child windows in
QCocoaWindow.
Stack order
Although child NSWindows can be ordered relatively to each other, they
need to be added again to be moved lower in the window stack. This also
means the windows above it need to be added on top.
Key (focus) status
One of the remaining issues, is to make sure the top level window keeps
the "key status" while still forwarding key events to the child window.
Keeping same event propagation
This use case is best illustrated with undocking QDockWidgets (if these
are child NSWindows). The main issue is to make sure the QDockArea will
get the mouse events right after undocking a dock widget. We used a similar
workaround as the "key status" problem, and manually forward the mouse
events to the dock area's QWindow.
Manual test, by Morten Johan Sørvig, included.
Task-number: QTBUG-33082
Task-number: QTBUG-22815
Change-Id: I50e34936fb82bff013e99f4bcb3bd0db0704c6ae
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Make the printer selection option api public on Windows to be
consistent with Mac, and with the print program api which is already
public.
Change-Id: I3da9684288348eaa43276ca8534a1d5809f7027b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac and Windows print engines to preserve the
creator name when switching between native and pdf format.
Change-Id: Ie036af3140f24d8e34aa886f091384f93aa0157b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Mac supports Collate Copies using native api, so add support. Note
this is mostly only useful for setting the print dialog default, as
Mac supports server-side multiple copies so the app will never need to
collate the copies itself.
Change PDF and Windows to default to collate true to match Mac as this
is the behavior users expect.
Task-number: QTBUG-27724
Task-number: QTBUG-35251
Task-number: QTBUG-22144
Change-Id: Ia43dbc260b3a71aa5b267cca54c168ffbea794fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac print engine for set/get the Document Name using
the Job Name setting. Our documentation states this is one use that the
document name will be put to so is appropriate to be used.
Change the Windows print engine to default to a blank Docuemnt Name
consistent with the other print engines. If still blank when printing
then use a default value.
Task-number: QTBUG-27724
Task-number: QTBUG-22144
Change-Id: If590811b5720e6f759eabc290b578b94e221f9f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The PrintEngine keys are not consistently treated across the platforms
and are not properly tested. Start the process of making the print
engines behave consistently by documenting and testing the current
behavior. Ensure all unsupported features return a consistent
default value.
The auto test for valuePreservation() has been flaky depending on the
platform and installed printers so remove it and replace it with more
complete testing. If no native printers available then don't test
the native engines.
Fixes for the individual inconsistent keys will follow.
Task-number: QTBUG-26430
Change-Id: Iab914d7e0a5ae4a2cdc24c8645751f0910cf440c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes the following case:
<blockquote>
<span />Foobar
</blockquote>
Qt would see the end of <span>, and consider the current block
tag as closed, thus resetting the block format, thus losing the
margin set for the current block (due to blockquote).
If you do
<blockquote>
<span>Foo</span>Foobar
</blockquote>
instead, then the same would not happen, since hasBlock is set
to false when we append text to the current inline node.
[ChangeLog][QTextDocument] Add support for empty inline elements
in block tags.
Task-number: QTBUG-33336
Change-Id: Ic566edfec96cb8d44d1c02932bb195bc921d1580
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This fixes a serious regression from
7d72516b52.
[ChangeLog] QFileSelector: the identifier for OS X has been changed back
to 'osx' from 'mac', and 'mac' and 'darwin' have now been added as
selectors for Darwin OS (which is the base of both OS X and iOS).
Task-number: QTBUG-35073
Change-Id: I83183e34c5a697338cc1ddcac33a41bd379ded12
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
When changing a filter so that a previously empty proxy model becomes
populated sorting was not applied correctly.
This was caused by using mapToSource for getting source_sort_column
from proxy_sort_column. For an empty proxy model this won't work because
no valid proxy index can be created in this case.
We now directly use the root index column mapping instead by doing
essentially the same as QSortFilterProxyModelPrivate::proxy_to_source
but without the sanity checks needed for external use.
The sorting feature of QSortFilterProxyModel has always assumed that
the number of columns is specified by columnCount(QModelIndex()) so
the behavior doesn't change.
[ChangeLog][QtCore][QSortFilterProxyModel] Fixed sorting when a
previously empty proxy model becomes populated because of a change in
the filter.
Task-number: QTBUG-30662
Change-Id: I21322122e127889dfadc02f838f0119ed322dcab
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It was impossible to hide/show the close button after a QMdiSubWindow
was created.
Task-number: QTBUG-9933
Task-number: QTBUG-27274
[ChangeLog][QtWidgets][QMdiSubWindow] Fixed setWindowFlags() for QMdiSubWindow.
Change-Id: I7db9a1bef5ba8a8ace729acb85682c8b3de9c33c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add overloads to the find() methods in QPlainTextEdit and QTextEdit
that find the next occurrence matching the passed regular expression.
These are convenience methods that eliminate the need to use the
document() method and the need to handle the QTextCursor return value.
[ChangeLog][QtWidgets][QPlainTextEdit] Added find method overload using QRegExp
[ChangeLog][QtWidgets][QTextEdit] Added find method overload using QRegExp
Change-Id: Ia6139b771e3ae4ca02e4b8ea7fde19e5dc71b9d8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When drawing to and from the less common formats most of the cpu time
is spend in conversion. The conversion method is rather slow due to
using variable shifts and masks that the compiler does not have a chance
to optimize.
This patch changes the conversion methods to being templates fed by
constexpr methods. This allows the compiler to fully optimize the methods
yielding 2x->5x speedups.
The reliance on constexpr however means the optimized methods are only
used under C++11.
Change-Id: I2ec77c4c1c03f12ee463a694a2b59db0f0b52db1
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This makes the font merging possible and solves an issue
with the default font properties inheritance when used
in conjunction with QTextFormatCollection.
Change-Id: If8b543c011122dde9f086f5d696df3b042f7b90c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
introduced by b0b22e8d49 .
Change-Id: Ia57331ce9373a414f2bc56962412f20ef83bd7ca
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This simplifies the code a lot and avoids silly mistakes where a
specific integer type is missing (such as char16_t).
Change-Id: Id91dfd1919e783e0a9af7bfa093ca560a01b22d1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
...and thus consume 4 bytes less per glyph and increase the performance a bit.
It seems, the only CTFontGetAdvancesForGlyphs() returns both x and y
advances, though y advances are always equal to 0 for horizontal
orientation and x advances are always equal to 0 for vertical orientation.
Also, rename `advances_x` to `advances` for consistency
and declare QGlyphLayout's data size in a single place.
Change-Id: I56b20f893f8a6feb7aa870e3edbca99dd93ba2e2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
A few more HTTP status codes from the 4xx and 5xx series have been
added to QNetworkReply::NetworkError.
For content errors, the following codes have been added:
1. 409 - Resource Conflict
2. 410 - Resource Gone
For server related errors, the following codes have been added:
1. 500 - Internal Server Error
2. 501 - Operation Not Implemented
3. 503 - Service Unavailable
Few of the above codes are quite possible when communicating with REST
based services.
NOTE:
=====
* HTTP error status 400 is interpreted as
QNetworkReply::ProtocolInvalidOperationError.
* QNetworkReply::UnknownServerError is returned for all server related
errors (5xx) not listed above.
[ChangeLog][QtNetwork][QNetworkReply] Added more (specific) HTTP status
codes to NetworkError enum.
Task-number: QTBUG-30880
Change-Id: I9d2a133f6b3869f26710c6eb930dd8b08df31108
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This aimed to disctinct joining types "L", "T", and "U" from just "U".
Unicode 6.3.0 has introduced a character with joining type "L" and
Unicode 7.0 will add a few more characters of joining type "L", so
we'll have to deal with it anyways.
[ChangeLog][QtCore][QChar] Added JoiningType enum and joiningType()
method that deprecates the old QChar::Joining enum and joining() method.
Change-Id: I4be3a3f745d944e689feb9b62d4ca86d1cf371b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QImage::pixel() returns the raw underlying pixel values for
RGB32. For all other pixel formats the returned value is either valid
ARGB32 or ARGB32PM.
This patch masks the undefined alpha field in RGB32 so that the return
value is well defined QRgb. It also fixes one test that relied on the
previous behavior.
Change-Id: If37463528268b7419733499d1f7bfd0d1097d21e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Currently INV_PREMUL rounds strictly down. While PREMUL rounds evenly.
This patch adds 0x8000 to the intermediate results in INV_PREMUL before
right shifting, thereby achieving even rounding.
The rounding also makes PREMUL(INV_PREMUL()) into an identify operation,
which means we can safely convert ARGB32PM to ARGB32 and back without
ever losing color details. A test is added to verify this.
Change-Id: I1267e109caddcff0c01d726cb5c1c1e9fa5f7996
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Each model test gets its own temporary directory, thus there is no problem parallelizing them.
This should reduce the time spent for a testrun of qtbase by around 3 minutes.
When running only the sql tests it saves less since there are no other tests to run in parallel.
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 43 seconds
Serial tests: 4 minutes 42 seconds
Parallel tests: 1 second
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 second
=== Totals: 12 tests, 12 passes ================================================
After:
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 7 seconds
Serial tests: 50 seconds
Parallel tests: 3 minutes 17 seconds
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 minute 23 seconds
=== Totals: 12 tests, 12 passes ================================================
Change-Id: I355ceed62fae852ad8cd442848e263438afb738e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
q_func() which is declared in Q_DECLARE_PUBLIC is usually private.
We should use q_ptr directly in QObjectPrivate::connect, otherwise
it does not compile when trying to access the private q_func
Change-Id: I235165a0994327102dbb31c390c2cafdffe806dc
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch adds tests for the consistent handling of transparent
drawing results on opaque formats that was introduced with commit
6f7d370ade
Change-Id: If5d11d0f2e111ef88490a4dc20a64b0858ad5426
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This patch fixes an issue when a font that was added with QFontDatabase::addApplicationFont
can not be removed any more.
The reason for that is that QFontconfigDatabase::addApplicationFont adds the font to the FontConfig
application set from where it cannot be removed any more and is picked up every time the font database is
repopulated (e.g. after a call to QFontDatabase::removeApplicationFont).
This also fixes the QFontDatabase autotest which unfortunately does not fail on linux, because it tries
to add "FreeMono" (which in most cases is already there as a system font). So this patch removes FreeMono and adds
LED_REAL as test font.
Change-Id: I2fa5f4df0ad2099ac28673760ea25234c725dfc6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Most of the test is executed in RTL mode since it is never restored.
Task-number: QTBUG-36395
Change-Id: I110966085a5a265f093fc4479eebc1f1bf0614c1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The tests then have a predictable, stable environment and do not depend
on file system operations.
Task-number: QTBUG-23697
Change-Id: Ibbd356f8bd7419ec4a3a88d2c0b5cd0830049790
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Implemented that way in src/widgets/widgets/qmdisubwindow.cpp:2081.
Change-Id: I82fdf0c04f1655a130c5e6a6f1e23d325d546ab3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The support for QArrayData variadic arguments without C++11 for GCC
has been removed in commit 69478da0f0 . Change the autotest to reflect
that, too.
Change-Id: I40468f5d67cb2db553fd7a7d5b604f46403ac538
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Even if the system is not under high load, this test can generate 4
updates on Windows. This is seems to be because the timer actually
triggers before its supposed to (sometimes the second start() triggers
an update right before the animation is done (at timestamp 399 for
instance), forcing it to generate yet another timer event in order to
reach the end)).
Under high load conditions, too many things can break this test,
usually it finishes even before the pause(), causing the
QVERIFY(animation.state() == QAbstractAnimation::Paused);
to fail.
Change-Id: Id94c0d16656675bc6165b7795f3c41a30616a3ba
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Add ref qualified versions of QImage::convertToFormat, so that a
temporary QImage can be converted in-place to a format of equal depth.
[ChangeLog][QtGui][QImage]Added rvalue qualified convertToFormat method
for in-place conversion
Change-Id: I2eed5ffd63f5aea4ffa1147bf7607b02a49d9c5d
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
According to my profiling of Qt Creator, qHash and the SHA-1 calculation
are the hottest spots remaining in QtCore. The current qHash function is
not really vectorizable. We could come up with a different algorithm
that is more SIMD-friendly, but since we have the CRC32 instruction that
can read 32- and 64-bit entities, we're set.
This commit also updates the benchmark for QHash and benchmarks both
the hashing function itself and the QHash class. The updated
benchmarks for the CRC32 on my machine shows that the hashing function
is *always* improved, but the hashing isn't always. In particular, the
current algorithm is better for the "numbers" case, for which the data
sample differs in very few bits. The new code is 33% slower for that
particular case.
On average, the improvement (including the "numbers" case) is:
compared to qHash only QHash
Qt 5.0 function 2.54x 1.06x
Qt 4.x function 4.34x 1.34x
Java function 2.71x 1.11x
Test machine: Sandybridge Core i7-2620M @ 2.66 GHz with turbo disabled
for the benchmarks
Change-Id: Ia80b98c0e20d785816f7a7f6ddf40b4b302c7297
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Moc should check full scope of any related objects or
gadget when it constructs extra data.
Change-Id: Ibd1b607a389cd4e788c0916984464cd9103d9c59
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add support for using qCDebug and friends in the 'printf style' way.
This allows an almost mechanical conversion of existing qDebug, qWarning,
qCritical macros, and allows avoiding the size overhead the streaming
style incurs (mostly due to inlined QDebug code).
To handle this gracefully we require variadic macros (part of
C++11/C99). For compilers not supporting variadic macros we fall back
to checking the category in QMessageLogger.
[ChangeLog][QtCore][Logging] Allow qCDebug macros to be used in a printf
style.
Change-Id: I5a8fb135dca504e1d621bb67bf4b2a50c73d41b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some comparison operators comparing to const char *
where not implemented correctly.
Task-number: QTBUG-34024
Change-Id: Idbdc64c8ed93e88d9f2b2f55213bc785b33cb543
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Task-number: QTBUG-35743
[ChangeLog][QtTest][Windows] Use correct UTF-8 encoding for XML test results on platforms with different console encoding.
Change-Id: Ice9d03192098f931e5dac358928e0c4421ab715e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Any cipher that is < 128 bits is excluded from the default SSL
configuration. These ciphers are still included in the list
of availableCiphers() and can be used by applications if required.
Calling QSslSocket::setDefaultCiphers(QSslSocket::availableCiphers())
will restore the old behavior.
Note that in doing so I spotted that calling defaultCiphers() before
doing other actions with SSL had an existing bug that I've addressed
as part of the change.
[ChangeLog][Important Behavior Changes] The default set of
ciphers used by QSslSocket has been changed to exclude ciphers that are
using key lengths smaller than 128 bits. These ciphers are still available
and can be enabled by applications if required.
Change-Id: If2241dda67b624e5febf788efa1369f38c6b1dba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That way we can avoid name conflict with a namespace defined in
a different moc test
Change-Id: Id631d7c5556c9d6940e16dc53eb438dbcd0095eb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Values from different enums were compared.
Change-Id: I2faf73976e4b24abbdc915e8445256fe7a5be5bd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The documentation implies that cd() and cdUp() functions return false if
the new directory is not readable, but that is not the case. It is an
obvious mistake in the documentation, because cd'ing into a nonreadable
directory is perfectly valid.
Provided also with a test to verify that cd() actually returns true with
nonreadable directories.
Change-Id: I4aa3e859b35c64266df510a203574e3701aea77c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Data::allocate(0) returns a pointer to read-only memory, updating d->size
will segfault. The safety check for this exists in all other QVector ctors
already.
Change-Id: Ida0fe4182de56ee62c7f91e8652cfafbfd7b8410
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not apply additional encoding when reading process output.
Fixes errors when encountering UTF-8:
Traceback (most recent call last):
File "./generate_expected_output.py", line 117, in <module>
generateTestData(path)
File "./generate_expected_output.py", line 106, in generateTestData
out.write(data.decode('utf-8'))
UnicodeEncodeError: 'ascii' codec can't encode character u'\xdc' in position 5485: ordinal not in range(128)
Change-Id: Ib827787a59a18b4d3d0601645856517f43c01fc3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Evaluate command line arguments and use directories only when empty.
Change-Id: I818ec13c686018a3f607e91174e57d8f8bbf15f7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The compiler service needs to know what options to pass to the compiler,
and these options can affect the outcome of the shader blob. Runtime
compiled shader output must match this file name in the binary directory.
Pre-compiled shader blobs (e.g. those placed in a resource file) are
permitted to drop options from the file name if the implementor can
ensure the blob is compatible with the target.
Defines are not written out as options, but written into the shader
source, and therefore affect the cache key.
Change-Id: I11e4a43fcf6818ddb29aca5eba3d8647ba4021a1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The actual code in testlib now indents the duration tag when it is for a
function.
Change-Id: Iee62db9c81f11dc54e57f166bf9fb2b7012b7e03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Commit 773dd01 introduced a general mingw platform scope, which
is cleaner and more flexible than matching the spec name.
Change-Id: Ie3a9cb791a83f7c8a51bc4e23069190c452ab521
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For example, QObject is non copyable (its copy constructor is deleted or
private via Q_DISABLE_COPY). It should still be allowed to pass a reference
to a QObject as an argument to as signal (or slot).
This fixes a compilation failure.
Task-number: QTBUG-36119
Change-Id: I9bcf477e347d69fdae2543c99781b6421883be78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests themselves may not actually pass, but it's a start, and allows
us to sanity-build a few things in the CI that actually produces a final
binary.
Change-Id: I02643b6ffa1522de1a7d17d737c8ab45ffac6a93
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Since now in Qt5 the moc does full macro substitution, it needs to handle
the defines passed is command argument, even if they span over multiple
tokens, or if they do not have any token.
Example:
moc '-DCOMPLEX=QVector<int>' '-DEMPTY=' foo.h
[ChangeLog][moc] Fixed passing -D of a macro defined to something more
complex than a single identifier.
Task-number: QTBUG-33668
Change-Id: Ie8131de215f1659a24af4778d52ee40cda19759f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Qt since approximately 4.4 has set the verify callback on both the SSL
store and the SSL context. Only the latter is actually needed. This is
normally not a problem, but openssl prior to 1.0.2 uses the verify
code to find the intermediate certificates for any local certificate
that has been set which can lead to verification errors for the local
certificate to be emitted.
Task-number: QTBUG-33228
Task-number: QTBUG-7200
Task-number: QTBUG-24234
Change-Id: Ie4115e7f7faa1267ea9b807c01b1ed6604c4a16c
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For convenience, it reads more easily (and is somewhat expected) to
be able to add a string to a QJsonArray like you might with a
QVariantList: QJsonArray() << "string". Previously, QJsonValue provided
a private void* ctor to explicitly deny this case because it would
implicitly convert to a boolean. This ctor provides a const char* ctor
(much like QVariant) that interprets the incoming text as utf8 and
creates a String type QJsonValue.
[ChangeLog][QtCore][QJsonValue] Added constructor to QJsonValue for const char *
Change-Id: Icafa954d3da1fb264f9d0fd7cd1a1d2fbbe15095
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
operators for +, +=, and << were added to QJsonArray to make
it easier to work with, and more closely resemble the Qt
container classes
[ChangeLog][QtCore][QJsonArray] Added convenience methods to QJsonArray for appending QJsonValues
Change-Id: I96e0a43015f7c0f980cbbef7f20bd2085ee04795
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
update-mime-database does not exist, so there is no point in
trying to build this test.
Change-Id: Id60f2f8fc3af33d3f7ae2fb4f1042356b60f6596
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
... to have a real world test case for uploading via SSL,
QHttpMultiPart (+ resetting) etc.
Change-Id: I004dd6f2507776b2fb8ebe1f02625b40abff6261
Reviewed-by: Richard J. Moore <rich@kde.org>
It seems that sometimes QCursor::setPos() will not get the opportunity
to run the event loop before scrolling the list view unless we do it
explicitly.
Task-number: QTBUG-35060
Change-Id: Ic635bd8d1a4e3dbcadf9605e88197df6a0f69fc7
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Otherwise you get:
undefined reference to `vtable for QAbstractSocketEngine'
when -developer-build is not used.
Change-Id: I444140736a6bf736894dc12a20f6a4d48af2678e
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Otherwise you get:
undefined reference to `qt_qhostinfo_clear_cache()'
Change-Id: I32313f290b9e4236440ae01afe12285d4539be60
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
- Use a separate widget for each test.
- Replace hard-coded timeouts by qWaitForWindowExposed.
- Center windows on screen.
Change-Id: I45ae306fd23348ee5dec3849e64ec98843e8bf32
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
* Mongolian and Phags-pa characters have been given a Joining_Type
classification for contextual shaping. As a part of these additions,
one Phags-pa character has the Joining_Type value of L (Left Joining),
which no character had been assigned before.
* The unassigned code points in the Currency Symbols block have been
given the Bidi_Class property value ET and the Line_Break property
value PR, to help implementations support new currency symbols,
when they are encoded.
* Hebrew letters and basic punctuation marks have been assigned
the newly introduced Word_Break property values Hebrew_Letter,
Single_Quote, and Double_Quote.
* The Bidi_Class property has been extended with four new values
for directional isolates.
For more details, see http://www.unicode.org/versions/Unicode6.3.0/
Change-Id: Iad62d02edc58a8497898dcd6d6c70d5aece317ea
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This reverts commit 934f062203.
The patch needs to be modified a bit. Many users considers
not having the old feature as a big regression.
The feature needs to be improved with a variable that is
only set when the user uses setSingleStep.
Task-number: QTBUG-33906
Change-Id: I35e5d3e9d3d7a3ebd01807b03a0e7a424185d483
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I9c0b110e36dd80c6a0b7275aa13bc548419aca9c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
Reviewed-by: Mehdi Fekari <mfekari@blackberry.com>
[ChangeLog][QtTest] Added test duration to xml output.
When running tests with xml output a new tag of the form
<duration msecs="123"/> is added to each test function and the test as a
whole.
Change-Id: Ibc4db066b6acf5fac6c578f5e5ca5ce4b5d8ea8e
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Fix parsing of ISO Date from being totally lenient to being semi-strict
by requiring the separator positions to be non-numeric.
[ChangeLog][Important Behavior Changes] Parsing of Qt::ISODate by
QDate::fromString() and QDateTime()::fromString() is not as lenient as
before, the date component separators are now required to be
non-numeric. This means a string like "2000901901" will no longer be
recognized as a valid ISO Date, but "2000/01/01" will still be even
though it doesn't strictly meet the ISO format of "2000-01-01".
Task-number: QTBUG-34141
Change-Id: I0e481144136c60d4cac61364b9b2c1d2cd1e78fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Explicitly check that the QTimeZone is valid before trying to use it.
Change-Id: Iec415a2cb07071502fe71ee5ac92a7657e818f99
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tests pass with the new test server image. Once we are using the
new test server we can remove the test for the host not found error.
Change-Id: Iac8ba6d8ce31b0865b33a003086aac0339afe338
Reviewed-by: Richard J. Moore <rich@kde.org>
It's usually a bad idea to surround slots or signals with #ifdef since
moc may not parse it the same way the compiler does.
Change-Id: I6a3623ed7cb9fbc1b966df9d60f71b7fdf91acfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
There was a comment about the test failing for max() because of an
overflow. That happens if you're at UTC or ahead of it (to the East of
the Prime Meridian), which is how this test usually gets run (UTC,
Europe/Oslo, Europe/Helsinki, Pacific/Auckland). But if you're behind
UTC (to the West of the Prime Meridian), then the overflow happens for
min().
Change-Id: Iebba49d1303e9f18f5038f5cf23c77bf83e5fd4b
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The encoder is in qjsonwriter.cpp, which requires special handling for
ASCII due to the use of escape sequences. The decoder is in
qjsonparser.cpp, which only scan one character at a time.
As a side-effect, the JSON parser now reports the UTF-8 error in the
first character with error, instead of the last. This is probably what
should have been expected.
Change-Id: I52e5bc30d71466b6a36098b4150c61b2e385d8e9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like before, this is taken from the existing QUrl code and is optimized for
ASCII handling (for the same reasons). And like previously, make
QString::fromUtf8 use a stateless version of the codec, which is faster.
There's a small change in behavior in the decoding: we insert a U+FFFD for
each byte that cannot be decoded properly. Previously, it would "eat" all bad
high-bit bytes and replace them all with one single U+FFFD. Either behavior is
allowed by the UTF-8 specifications, even though this new behavior will cause
misalignment in the Bradley Kuhn sample UTF-8 text.
Change-Id: Ib1b1f0b4291293bab345acaf376e00204ed87565
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add support to hide the cancel button on the last page of a wizard. This
is useful for wizards where the last page is used as a summary page that
should not be cancelled.
[ChangeLog][QtWidgets][QWizard] Added NoCancelButtonOnLastPage option.
Task-number: QTBUG-7484
Change-Id: I282bda55a8dec9cde6439a9285d79e0a5c6df96a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If width was specified, but not height (or vice versa) the actual
window size was not as expected:
* The window width was not the width specified.
* The window height became 0.
This was unexpected, since if both width and height was not specified
it would fallback to becoming 160x160 (on Windows).
However, with the advent of https://codereview.qt-project.org/71999
both width and height might receive sensible defaults based on the
content of the ApplicationWindow, which would mean that it might be
reasonable to expect that you only need to specify one size component
of the window.
This also fixes an assertion in file
..\..\..\3rdparty\angle\src\libGLESv2\renderer\SwapChain9.cpp, line 81
The assertion happened when a window was created with 0 height (but
valid width), and then its height got increased, causing it to become
visible.
Change-Id: Ia9e730418e35d679907bdcc59b00c3c988216c32
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
[ChangeLog][QtCore][QVarLengthArray] Added the indexOf, lastIndexOf and
contains functions to QVarLengthArray. These functions make the class
more similar to QVector.
Change-Id: I9bd2b22bd8b7151c2d17aede36e5f2126570600b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
According to docs DynamicPropertyChange event should be sent from
setProperty function only when property is added, removed or
changed.
Change-Id: I080a27a4119a63580b03172f4b5b367338c6f440
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Adds inplace version of QImage::rgbSwapped() and QImage::mirrored() that
can be used on temporary QImage objects when supported by the compiler.
[ChangeLog][QtGui][QImage]Rvalue qualified mirrored and rgbSwapped methods for inline conversions
Change-Id: I4ffb658bf620dfc472d9db14c1aa70291c1fd842
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
The units that were supposed to have variance were completely off in the
test leading to all benchmarks with slight variance being completely
flaky.
Change-Id: Ib76593813974adee462b3f03be9370d2248d770c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
This also fixes the auto test, tst_QKeySequence::parseString() with
Win+A and Simon+G.
[ChangeLog][QtGui][OS X][QKeySequence] return Qt::Key_unknown with
invalid modifiers on OS X
Task-number: QTBUG-24406
Change-Id: Ie90393c9691f443c7c359cb3a487609a9691bc44
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The style name should be macintosh, not mac.
This also reverts commit 2f46ea9fd6.
Task-number: QTBUG-23680
Change-Id: I7fd06da165ca5bc99801c13af13fdb3d35119566
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This test doesn't fail any more.
This reverts commit 6f21509ac0.
Task-number: QTBUG-23677
Change-Id: Idc094ce0c90b8d3ba0a75d93ccef8da4801605c7
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Add an API that allows to retrieve and detach the texture from the
framebuffer object. The next bind() call will then create and attach a
new texture.
[ChangeLog][QtGui][QOpenGLFramebufferObject] Added takeTexture() for
retrieving and detaching the texture from the framebuffer object.
Task-number: QTBUG-35881
Change-Id: I2cca37f5872c1685b1238047f8b912e6534ab781
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
While there is no implementation for accessibility yet, enabling it allows
the interfaces to be used and an accessibility plugin to be developed
for this platform.
IAccessible2 and MSAA bridge autotests are disabled for this platform.
Change-Id: I2bfd07f6b21ca469b27d88ef11df723ac8ff8202
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This function has been completely broken since Qt 5.0. Unfortunately
the autotest's verification steps were somewhat faulty so returning
a null pixmap from renderPixmap() did not trigger a failure.
The implementation is now done with framebuffer objects and pixel
readback. This is not ideal performance-wise, but is the only option.
In Qt 4 pixmaps were often backed by platform dependent native pixmaps
that could be used as rendering targets for OpenGL content. This is not
an option anymore since pixmaps are raster backed on all the major platforms.
Task-number: QTBUG-33186
Change-Id: I8f558e33bf7967ac3be439fd5a3eac07b6444be5
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
This makes testlib a lot more hackable since when the output is changed
in a defined way we can regenerate the expected output (eg adding the
test duration which will be a follow-up patch).
Note that the script does not work properly on Windows and not all
benchmarks work, but at least it reduces the work of adapting files to a few lines.
Change-Id: I910387cd92ff82aa629747a3a3033dae17fbd711
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The newly added generate_expected_output.py was used to get the expected
output into a more reproducible state.
Change-Id: I1ca75c8e0c5778d25c1df531bd298007aac0ff4a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
* Fix QCocoaWindow::setGeometry() to respect WindowFrameInclusive
* Support fake fullscreen on 10.6 or WindowFullscreenButtonHint was not set on
10.7 and later
* Fix tst_qwindow on 10.6 and later
Task-number: QTBUG-23059
Task-number: QTBUG-34629
Change-Id: I6e032ca55b45674388b00506a424d3bd7ece429f
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When declaring a Q_PROPERTY(SomeType::SomeEnum foo ...) and SomeType is not a
QObject but a gadget, then we must still include SomeType's meta object in the
list of related meta objects.
Task-number: QTBUG-35657
Change-Id: I46195140cb5d180c4f03bb1fe06a876e3fe11267
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change childWidget->windowHandle() to childWidget->internalWinId() in
q_createNativeChildrenAndSetParent() to determine whether should we call
childWidget->winId().
This is because in some circumstances Qt will crash due to accessing
deleted QWidgetWindow object if we use windowHandle(). Think about the
following scenario:
1) create a widget A without parent and add two child widgets B and C to A
2) create a native widget D as the child of B, note that when we set
Qt::WA_NativeWindow attribute to it, its QWidgetWindow will be created
which means its windowHandle() is not null.
3) create a top level widget E as the child of C and show it. This will
make Qt call createWinId() to A and then
q_createNativeChildrenAndSetParent() will be called to create A's native
children recursively and finally make D's QWidgetWindow object become a
child of A's QWidgetWindow object. Please note here that B will not become
a native widget just because at that moment windowHandle() of D is not
null and Qt will not call winId() to its parent B
4) Set A's parent to another widget which has been shown, setParent_sys()
will be called to A and then Qt will call destroy() to A. in destroy() Qt
will try to call destroy() to its children recursively with a condition that
the child has Qt::WA_NativeWindow been set. But D's parent B is not a native
widget right now so B and D is not destroyed. Qt will then deleted the
QWidgetWindow object of A, since E's QWidgetWindow object is a child of
A's QWidgetWindow object, it will also be deleted. Now E hold a deleted
pointer of QWidgetWindow object. This is the source of crash later.
Task-number: QTBUG-35600
Change-Id: I97a20a68e626ee62b15bb4eae580e26f8948923b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Some database systems (like PostgreSQL) use alphanumeric error codes.
Introduce a new method nativeErrorCode() which replaces number().
If the error code cannot be converted to int, number() will return 0.
Task-number: QTBUG-142
Change-Id: Ic7fba841737674b75c0c01c2263f51d2041da497
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
In a slot connected to readyRead, if the app detects that the
buffer size is too small and increases it, it expects that
readyRead() will be emitted again.
setReadBufferSize() doesn't re-enable the socket notifier when
calling from within readyRead, and readyRead itself was missing
the code to do it.
Change-Id: Ia00a3066ad3ba09d5cfae0716adc5691ae96c3fa
Done-with: Thiago
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use of mkpath/mkdir is removed in order to make the proxy less
invasive when there is no compiler service running. Creation of the
directory structure is fully the service's responsibility.
Service availability is now only checked once, at the first invocation of
D3DCompile, as it is expected to be started before the application.
Change-Id: Ib8c4f062c418497c2253daf524654e1db30dae47
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Windows 7 and later have LOCALE_SSHORTTIME, which is what we need.
Task-number: QTBUG-33718
Change-Id: I4c3f113d17102a37fb752de56f06b312f27c7887
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
For IPv6 addresses don't call toAce as it returns the empty string.
We should reflect the behavior of browsers here, which all accept
cookies from IPv6 addresses.
Original-patch-by: David Tapuska <dtapuska@blackberry.com>
Task-number: QTBUG-35022
Change-Id: Ic00369e923d044ec459822b2405865c13e4185b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If the domain is an IP address, we should not do any magic regarding
leading dots etc.
Task-number: QTBUG-35022
Change-Id: I7722de4e6027666dde27e9e37b6353e3da775d94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This is only possible for two important reasons:
1) QString and QByteArray d pointers are both done with QArrayData and
that class does not care that the alignof(T) changes from 2 to 1,
so we can give the pointer from QString to QByteArray
(after adapting the allocated size, which is now double)
2) conversion from UTF16 to Latin1 always has fewer bytes (exactly half)
Change-Id: I17b2690c910f3de8db55156c6d6b5f55be06d827
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test used a member testWidget that was cleared and reset after each
test, which caused focus fights and side effects. The widget is now
created and shown only when necessary.
Change-Id: I0dc635e9d4cdf4f899994b88206bb0125526f6df
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Assume an unrelated class that declares an enum and uses Q_ENUMS. Consider
then a class that uses UnrelatedClass::Enum as a Q_PROPERTY. We used to
include UnrelatedClass in the primary class's related meta objects, in order
to support use-cases like
obj->setProperty("enumProperty", "ValueOfEnumAsString");
If however moc happens to see Q_DECLARE_METATYPE(UnrelatedClass::Enum), then it
would exclude it from the related meta objects, which would silently break the
string based enum value conversion. This was meant as an optimization, but it
isn't apparent to the developer why sometimes the string conversion would
work and sometimes not (depending on whether somebody declares that macro).
This also becomes visible in QML, which relies on the same embedded type
information for enum assignments.
This patch removes that check in moc's code generator and cleans up the code a
little. However always including the prefix of Q_PROPERTY(SomePrefix::Enum ...)
is not correct either, because it may be that SomePrefix is a namespace, which
would cause compilation issues. Therefore we limit the inclusion of related
meta objects only to Q_OBJECT decorated classes the moc has seen, and for these
we save the fully qualified name in the related meta objects array (for QTBUG-2151).
While this patch makes the previous workaround for namespace issues by using a
Q_DECLARE_METATYPE not workable anymore, by saving the fully qualified name we
are making a hopefully sufficient effort to not require a workaround in the
first place. There's always the new workaround of fully qualifying the type in
Q_PROPERTY.
One side-effect of this change is that in the autoPropertyMetaTypeRegistration
test of tst_moc, the CustomQObject for Q_PROPERTY(CustomQObject::Number
enumValue ...) is now a related meta object, and therefore when querying for
the type of this property via QMetaProperty::userType(), we are now aware of
this being an enum and try to resolve CustomQObject::Number via
QMetaType::type(qualfiedName). As there is no guarantee for this to succeed, we
must now also do what is done in the non-enum code path in ::userType(), which
is to call the moc generated type registration function.
Task-number: QTBUG-33577
Task-number: QTBUG-2151
Change-Id: Ibf20e7421cba464c558a25c76a7e1eef002c6cff
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
[ChangeLog][QtWidgets][QLineEdit] A blinking cursor in the middle
over horizontally centered placeholder text looks bad. Thus,
horizontally centered content is now considered as an exception
and the placeholder text is hidden when the line edit is focused.
Task-number: QTBUG-31669
Change-Id: I17aa1e6656673f81545a8437f90814b188ad484a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
tst_QObject is getting big, so make a separate test for QSignalBlocker,
but leave parts of signalsBlocked() in tst_QObject as that seemed to
have been the only check for blockSignals(true) actually blocking signal
emission.
Change-Id: I1cfac035e0e39203eea8626d43f316cc6244ee86
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When QSignalBlocker was reviewed, move semantics were asked for.
This patch add them.
This makes QSignalBlocker usable as a by-value argument (to transfer
control of signal blocking into a function) as well as as a return
value (to transfer control of signal blocking out of a function).
Change-Id: I714aa2a283bb33dba76e860649e88ed202e913c5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Attempt to fix
FAIL! : tst_QAbstractItemView::task200665_itemEntered() Compared values are not the same
Actual (spy.count()): 0
Expected (1) : 1
Loc: [tst_qabstractitemview.cpp(1292)]
which might have been introduced by removing the absolute qWait(200) in favor
of qWaitForWindowExposed() in afe8e368, so trying to compensate with a
QTRY_COMPARE.
Change-Id: Id437acd810b54e005daaf66ffffd4dd586075ab6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
To be able to call SetNamedPipeHandleState on stdin in a child
process, we must create a read-end pipe handle with the
FILE_WRITE_ATTRIBUTES flag set.
This can't be done with CreateNamedPipe but only with CreateFile.
Therefore we're creating the handles for the child process always
with CreateFile now. Besides, it's conceptually cleaner to have the
server handle of the named pipe in the calling process.
[ChangeLog][QtCore][Windows] Fix regression from Qt4 in QProcess.
It wasn't possible anymore to alter pipe modes of stdin in child
processes.
Task-number: QTBUG-35357
Change-Id: I85f09753d0c924bdc8a6cef1ea5dbe6b2299c604
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Press and hold is an interaction available on many platforms,
particularly when touch is involved. In Qt Quick this is exposed to the
user via MouseArea::onPressAndHold. This value should not be hard-coded,
but rather use a platform-specified default. This commit adds the
low-level hooks necessary for that to happen.
Task-number: QTBUG-24793
Change-Id: I621a8ac9de66b881e34336228056bffbb6306a70
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
... because they fail on the new test server. This commit can be
reverted once the Socks5 socket engine is fixed.
Task-number: QTBUG-35490
Change-Id: I85635d4b44d26168d40a56b7a121693297564f0f
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
... because it was used to operate a man-in-the-middle proxy.
Task-number: QTBUG-35474
Change-Id: Ic7f19708b278b866e4f06533cbd84e0ff43357e9
Reviewed-by: Richard J. Moore <rich@kde.org>
It's still a relocation, but at least it can be marked read-only
after the relocation run, if indeed the dynamic linker goes to
such a length.
Change-Id: Ibadddac3ab99d2e58cc32cfd57311bddd3bdb0ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
d3dcompiler_qt is a DLL for use with ANGLE which replaces d3dcompiler_XX
at runtime to proxy shader compilation calls. This is useful for:
- Loading the newest D3D compiler DLL found, instead of loading the
version specified when Qt was compiled
- Reporting better debug information when the compiler cannot be loaded
- Caching shader blobs for later use
- Returning cached shader blobs
- Deferring compilation to another mechanism, such as a D3D compilation
service running on a host debugging machine *
The above use cases are especially important for Windows Store apps, as
they are not allowed to ship the d3dcompiler. On Windows Phone, where
there is no runtime compiler, this is essential for handling QtQuick apps
which require runtime shader compilation.
* This requires a separate service which monitors a directory for shader
source files, compiles these files into D3D bytecode, and places
the bytecode in the qtd3dcompiler cache directory. This directory is
monitored by qtd3dcompiler, which is then able to then load the blob.
Change-Id: I9889c8d66d2ddbe5a7a1dc44bfe5d8ad229b0e43
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QHash::key() is O(n) and we're calling it n times. That can make repeated
calls to the meta object builder very slow, as for example QQmlPropertyMap
when inserting properties repeatedly.
Fortunately this is easy to fix, as the value in the hash map is also the
index, so we can simply iterate over the hash once. With the exception of
the class name, which we have to treat specially to ensure that it is always
the first entry in the string table.
Task-number: QTBUG-32720
Change-Id: Ic954c45c454107feee83216131f601cc69d4c63b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Brings Windows QPA on par with other platforms.
[ChangeLog][Windows] Don't cover the taskbar when maximizing
frameless windows.
Task-number: QTBUG-8361
Change-Id: Iba35132f697cb7379650a4c883b616c5c2023d4c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
It's unexpected that all messages generated by the stream version
of qDebug and friends have a trailing space. It also makes switching
to categorized logging (which only supports the stream version) difficult,
since all autotests checking for debug output would have to be adapted.
Task-number: QTBUG-15256
Change-Id: I8d627a8379dc273d9689f5611184f03607b73823
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will break network paths passed as command line arguments.
Introduced by 4ff6951550 .
Task-number: QTBUG-35432
Task-number: QTBUG-30628
Change-Id: Ice9ce15275ef69e9e9e82daf5a303e7c56294368
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Make
QCommandLineParser::add{Help,Version}Option()
QCommandLineOption::setDefaultValue()
QCommandLineOptionPrivate::setNames()
have transaction semantics: either they succeed, or they change nothing.
It's trivial to provide this guarantee, so do it.
Add a test for the surprising property that setDefaultValue("") resets
defaultValues() to an empty QStringList instead of one that contains
the empty string.
Change-Id: I61623019de3c7d2e52c24f42cc2e23ec5fddc4da
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix isValidId() which was failing valid IDs because it was splitting
name parts by \ instead of /. it was also rejecting offset from UTC
formats names. Add unit tests.
Task-number: QTBUG-35025
Change-Id: I4d23d2e54f4a9fac9afcc4eff0a02d6f4af21385
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code was there to do it, but it was using minimumValue instead of
maximumValue to test if the '+' should be allowed.
Task-number: QTBUG-20691
[ChangeLog][QtWidgets][QSpinBox] Entering positive values with the '+'
prefix is now allowed.
Change-Id: Iff62d073e350dc9a33b7e06e4b492048c74437c4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The abstractions are needed so that they can work with both
QGraphicsLayouts and QtQuick.Layouts.
Since the plan is to move the engine to QtGui, this means that the
engine cannot have any references to anything in the QtWidgets module.
As a consequence of that several things had to be done:
* The style info object had to be redone with an abstraction layer
to get rid of style and widget dependency. (Abstract class is
called QAbstractLayoutStyleInfo)
* QGridLayoutEngine must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngine.
* QGridLayoutItem must be subclassed due to some specializations for
QGraphicsLayoutItem, manifested as QGraphicsGridLayoutEngineItem.
Did also some minor cleanups, reordered arguments so that all styleInfo
arguments are last in all function calls
This also fixes QTBUG-35099 (bug was spotted during this refactoring)
Task-number: QTBUG-35099
Change-Id: If49d40f71870dc8d99d2e145be158e3080b595fa
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
(same thing for center- and delimiter-aligned tabs)
The width of the inline object wasn't taken into account, the code in
QTextEngine::calculateTabWidth only looked at glyph widths.
Change-Id: I303a6561c67870ff2094a685698e642fc1b53b12
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
A QMenu with no actions gets a size of (0, 0) on OS X.
With the new stricter expose event behavior this
is considered invalid geometry and the platform plugin
won't send an expose event, causing the qWaitForWindowExposed
test to fail.
Add a menu entry since the layoutDirection test is
not really interested in testing the special case of
empty menus.
Change-Id: I5221dc3f0472ac13edf821df08bacc3a4eb5cd9d
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Take longer search strings into account instead of just using the first
character of the search string.
Touches up https://qt.gitorious.org/qt/qt/merge_requests/1418 for
resubmission.
Task-number: QTBUG-3032
[ChangeLog][QtWidgets][QSpinBox] Fixed keyboard selection with
multiple-character strings.
Change-Id: I2f68c8b97b1a1884659dcb19f52b1efeace9b88b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When comparing expected with actual debug messages, allow the expected
ones to contain a trailing space. This is needed to not break all
autotests in a follow up patch, which will prevent ~QDebug() from
generating a trailing space by default.
Task-number: QTBUG-15256
Change-Id: I7f67393ddfbfe37fde1ca5ef45e4ad7f4b5324b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The cursor() test was missing a QTest::moveMouse() before sending of the
mouse event (as all the following subtests do). When run on a desktop with
the panel on the left side of the screen, the mouse pointer would land over
the left item instead of in between them, as assumed by the subtest, and
the following QCOMPARE failed.
Change-Id: Ib74fdf0cfbfbc8ecb79a906610a2da5cb50c89d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Use QTest::qWaitForWindowExposed() and QTRY_COMPARE() instead of
hardcoded timeout.
Task-number: QTBUG-35308
Change-Id: I27eee9932dd3b6087db4ad13b1a4fb184a487f57
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Introduce isNull overload to take field name as a parameter.
This is corresponding to the commit
7e6e141234
Change-Id: I122f79707d26eaa09c2f38dc31aeee1dac7de33b
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Currently the QPrinter constructor, setOutputFormat() and
setPrinterName() make bad assumptions about the availability of printers
when configuring NativeFormat which can lead to inconsistent print
engine set-ups leading to crashes in the print dialog, especially on
Windows where a valid DEVMODE is needed.
This change cleans up the init and methods to ensure NativeFormat can
only ever be set if we have both a valid plugin and a valid printer,
if not the PdfFormat is used. One side-effect of this is that it is
now impossible to set an invalid printer name via QPrinter (but still
able to be done via QPrintEngine if really needed). Also if no
default printer is set then use the first available one.
This also fixes a bug where setting a new printer name on Windows
reset all the saved settings.
[ChangeLog][Important Behavior Changes] QPrinter no longer allows you
to set an invalid printer name.
Task-number: QTBUG-34345
Task-number: QTBUG-26008
Task-number: QTBUG-26430
Change-Id: I19737e4209d8c8df5817ea83246b3dd0c483ee85
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
As the last line in the QObject destructor, we call setParentHelper(0) to
remove ourselves from the parent. In the process of that we also initiate the
QML parentChanged callback. The first thing that parentChanged callback used to
do (but now does it too late, after 26350b5ceafa0ade1328037f6234a7d288eb8f48 in
qtdeclarative) is to check if the object was deleted and then return. We could
re-introduce the check there, but I think it's cleaner to not bother calling
the callback on a dead object in the first place.
Change-Id: Ia4d43b65a9b3744a451b4c312a2d6f9c0e3b67dc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Add a check for the case sensitivity of the file system, so that
unit tests can determine whether names of preference files with
different case should generate an error or not.
* Add check for OS X native file format in rainersSyncBugOnMac().
Task-number: QTBUG-32655
Done-with: Liang Qi <liang.qi@digia.com>
Change-Id: I76821653dd4ebc00e20abdbb5b79c1a80290dece
Reviewed-by: Liang Qi <liang.qi@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
Tweak a handful of tests which didn't compile on this platform.
Change-Id: I208d9eb289dfb226746c6d0163c3ea752485033b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The QPrinterInfo copy and QPrinter constructors and the assignment
operator were not taking the shared_null into account, and so any use
of them resulted in a new null QPrinterInfo different to shared_null,
which lead to isNull() always returning true in anything other than
the simplest use case. While fixing this also make the shared_null a
Q_GLOBAL_STATIC.
Task-number: QTBUG-21087
Change-Id: I0beb24088208e9ed58d21ca26b0c8d00b02e5b8f
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Since contains() just wraps indexOf(), which has a QLatin1String overload,
add one for contains(), too, for consistency.
[ChangeLog][QtCore][QString] Added QLatin1String overload of contains()
Change-Id: I2acc628a51e00789fb2b90400cf0c523a5b5e65a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When we unlock the mutex, we need to take in account that the Connection
pointed by 'node' may be destroyed in another thread while it is unlocked
Doing 'node->prev = &node' will make sure that 'node' is actually
updated when it is destroyed.
Setting isSlotObject under the mutex is safer and ensure that no other
thread will attempt to deref the object.
The regression was introduced in 5885b8f775
tst_qobjectrace was updated to catch races arising when we are
connecting with function pointers.
Change-Id: Ia0d11ae8df563dad97eb86993a786b579b28cd03
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
New macro QVERIFY_EXCEPTION_THROWN may be used to check that some code
really throws an exception of specified type.
Change-Id: I7cf499c7c37a35407862bc604c6eb862c5f329d3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Avoid menus showing up at 0,0 which is a taskbar area when running
Unity.
Task-number: QTBUG-33972
Change-Id: I156eec78248cec1708adf6bcf2e9ddcc98b7d8c4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
There is a known bug where duplicate textChanged signals are
triggered on backspace/delete. The bug has been seen on Windows,
Mac, and Linux. Gabi showed that this duplicate signal is caused by
two calls to finishEdit(), one direct and one nested,
in QTextCursorPrivate::remove().
To attempt a fix, I removed the direct call and do not change the
nested call. This change only affects text buffers when they
receive remove commands.
This seems to fix the problem, shown by the test project
uploaded to the bug tracker and also in countTextChangedOnRemove
in tests/auto/widgets/widgets/qtextedit/tst_qtextedit.cpp.
Further analysis of finishEdit() and QTextCursorPrivate::remove():
finishEdit() calls signals contentsChanged() as long as a valid block
is being edited. Remove() calls finishEdit for all non-table edits,
so finishEdit will be called for most cases.
Methods in the public QTextCursor all seem to set adjusted_anchor
and anchor, none reading it directly, so I haven't found publicly
observable consequences to "adjusted_anchor = anchor = position;".
Task-number: QTBUG-15003
Change-Id: Ic35f25ee81c4007867b47cd8be03c146a673f86d
Reviewed-by: Graham Coleman <ravelite@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Qt::WA_Mapped maps (sic) to windowHandle()->isExposed(), and we set/update
it in QWidgetWindow::handleExposeEvent(). Setting it directly in show_sys
shortcuts QPA and assumes showing a window is synchronous on all platforms,
resulting in trying to flush the widget backingstore when the window was
not exposed yet (due to discardSyncRequest starting to return false).
This reverts commit 829b1d13b2.
Change-Id: I0bd700d4939bc69ba184d8586435b68ec3dd72fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This was a tweak to fix a bug in 2005 which has probably outlived its
usefulness, plus an accumulation of workarounds on top. (started as
48b5266e8ff9b472a16290dd923fe24dd0b6989b in the historical repo)
Task-number: QTBUG-34760
Change-Id: I2c01269e43636385ee5c89305c6b90f4a7f2c537
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The private method dateForLocalTime() was not checking that transitions
were valid, resulting in infinite looping when a time zone didn't have
any future transitions.
Change-Id: I0e5d07063861778dd86056a80c36fdd9f9d36133
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix parsing of TZ file abbreviations, to correctly return cases where
POSIX rule doesn't have separate DST rules, and where abbreviation
is a sub-string of another abbreviation, otherwise any toString() call
will crash.
Add test to exercise all available time zones, especially useful for TZ
file to confirm all file format variations dealt with. Fix parsing of
Version 3 of TZ file, and ICU display name, to allow all files generated
from release 2013f to pass, otherwise isValid() call will crash.
Task-number: QTBUG-34061
Change-Id: Ie0b6abc218adff1c8967eb33fdb0762041d2305f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name Olson was misspelled as Olsen in the public api of QTimeZone
which is needed to be fixed before first public release in 5.2 would
freeze the api and prevent it being fixed. It has been decided that
renaming as IANA ID would be more future-proof.
Fixes to the private code will be done separately to keep this patch
against release branch to the minimum required.
Task-number: QTBUG-34735
Change-Id: I8ee90644862c907f6d1937b8536f0c02583ae736
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
For me, this test failed because I don't have a Documents folder in my
home directory, even though that's what's returned from QStandardPaths
as the first DocumentsLocation.
Fix by falling back on the home directory if documentPaths.front()
does not exist.
Change-Id: I483f62f3b4b43d055c74774a7058a4aa420849b1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
