QFontDatabaseQPA should be able to reinitialize database and
reregister all the fonts when an application font is added, because
it will trigger db->invalidate().
Add cloneWithSize support to QFontEngineBox so that even no usable
font is found in QFontDatabase, QRawFont::setPixelSize can still
work (without making the result rawfont invalid).
Register application fonts with QFontconfigDatabase, the code is
adapted from QFontDatabaseX11.
Reenable QRawFont tests for QPA, these usages are now supported in
QPA.
Fix QStaticText tests, raster in QPA does support transformations.
Translate the text before ZAxix rotation so that it will be visible
in canvas.
Add back fixedPitch support to QPA, and fix QFontDatabase tests.
Fix QGlyphRun tests, ignore non-existence glyphs in alphaMap
locking.
Fix QFontMetrics tests.
Task-number: QTBUG-21415, QTBUG-20754, QTBUG-20977,
QTBUG-20976, QTBUG-20760, QTBUG-20759
Change-Id: I24aea7d6ec6b2ac6342134d1f2591327c23a692b
Reviewed-on: http://codereview.qt-project.org/5384
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Tests for widgets should select the
QWidget * version of overloaded QTestLib
functions rather than the QWindow * version.
Change-Id: I8b540b630758c0e7ba7ed88aba45d624c83ff378
Reviewed-on: http://codereview.qt-project.org/4977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Each destination and the format of output to write there is specified by
adding "-o filename,format" to the command-line. The special filename
"-" indicates that the log output is written to the standard output
stream, though standard output can be used as a destination at most
once.
The old-style testlib output options are still supported, but can only
be used to specify one logging destination, as before.
If no logging options are given on the command-line, a plain text log
will go to the console, as before.
To log to the console in plain text and to the file "test_output" in
xunit format, one would invoke a test in the following way:
tst_foo -o test_output,xunitxml -o -,txt
This commit also enhances the selftests to test with multiple loggers,
but negative tests (e.g. bad combinations of command-line options) are
left for future task QTBUG-21567.
Task-number: QTBUG-20615
Change-Id: If91e752bc7001657e15e427aba9d25ab0a29a0b0
Reviewed-on: http://codereview.qt-project.org/4125
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Modify the selftest to be able to run each subtest with a list of one or
more test loggers. The addition of tests that use this capability will
be part of a subsequent commit.
Task-number: QTBUG-20615
Change-Id: Iac3efe8220e8245aa7e5589348d2c86b8034dd28
Reviewed-on: http://codereview.qt-project.org/5292
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The multiexec test runs the same test object five times. If the -o
option is given, the output file is overwritten by each run of the test
object, meaning that tst_selftest only sees 1/5 of the test output in a
file compared with what it sees on the console. This makes it
impossible to use the expected output file to verify the test for both
console and file output. This issue is noted in QTBUG-21561.
Change-Id: I00031a2ea43a7ef78e8317473a089306ec062d8e
Reviewed-on: http://codereview.qt-project.org/5270
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The warnings selftest verifies that qtestlib correctly handles output
sent via qDebug() and friends. The test had a number of printf calls
that were used to tell the user what output they should expect to see
next, but by bypassing testlib's logging, these made the testlog differ
depending on whether the test log was directed to the console or a file.
The printf calls are no longer needed, as any regressions in qDebug will
be detected by tst_selftests, which compares the output of the warnings
test with a reference copy of the expected output.
Change-Id: I8c3a3237463141fa494c50ca02062760cb583090
Reviewed-on: http://codereview.qt-project.org/5200
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Change-Id: Ifd15f72e2c553fba0c399c921957c4e955bb590d
Reviewed-on: http://codereview.qt-project.org/5191
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make the test use qDebug instead of printf, so that the reference test
output is the same regardless of whether the log goes to the console or
a file.
Also rename the test class, as it was evidently cut-n-pasted from the
subtest selftest without being renamed.
Change-Id: I8df1f0989f2e8c33c1f829ba8110fd740ff70f63
Reviewed-on: http://codereview.qt-project.org/5184
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was attempting to verify two completely unrelated things, so
this commit splits it into two tests.
Also, printf calls are replaced by qDebug so that the test does not
bypass the testlib loggers.
Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee
Reviewed-on: http://codereview.qt-project.org/5178
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is not useful for finding bugs in qtestlib's logging code,
because it bypasses the qtestlib loggers and doesn't play nice with
tst_selftest. Neither is this test very useful for finding bugs in
QTest::qWait(), as the test only proves the qWait() terminates, not that
it waits accurately, or even that it waits at all.
Change-Id: Ia5dd7cbaf3a6fbb4e94e54ed155263580e495694
Reviewed-on: http://codereview.qt-project.org/5173
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Move handling of -qmljsdebugger= argument from QApplication
to QCoreApplication. It makes sense to allow debugging also
for applications based on QCoreApplication (which we intend
to support in QtDeclarative).
Change-Id: I5a03a4510fc166cea5aad146da673ee0e7cd5d36
Reviewed-on: http://codereview.qt-project.org/5121
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Stop the mis-use of navigate to find the parent.
In order to make navigation straight forward
parent and child functions are now part of
QAccessibleInterface.
This allows navigating the hierarchy of
accessible objects without the 1-based indexes in the
navigate function which lead to confusion.
Eventually the support for Ancestor in navigate can be completely removed
and forwarded in the windows bridge if needed.
In addition default parameters for virtual children.
This will make the transition smooth since it allows to remove the integer
already.
Change-Id: I278287ce17161f9fa46797ac244676778c859576
Reviewed-on: http://codereview.qt-project.org/5024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Autotests that don't need QtGui or QtWidgets
api shouldn't link against those libraries.
Change-Id: I2808289068514fcac582808828ad4634e2631733
Reviewed-on: http://codereview.qt-project.org/5093
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Problem was fixed by Change Ie172e935: Revert accidental v8 submodule version downgrade
Change-Id: Ie0467170df70e9fcc10837150103d48ddd48734b
Reviewed-on: http://codereview.qt-project.org/5006
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
If the MKSPEC we get is an absolute path, we should
pass that one on to qmake. Otherwise it'll try to
find the mkspec in the install location. This fails
as 'make check' is being run before installation.
Task-number: QTBUG-21402
Change-Id: Ie872546f2ee7c5d737e50a1779637e393538ccc2
Reviewed-on: http://codereview.qt-project.org/4999
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Don't store separate strings for the logger name and the associated file
suffix -- just use the same string everywhere.
Change-Id: Ie7d1af6bf906b5ac09fbd5fcc5754b68036fb370
Reviewed-on: http://codereview.qt-project.org/5060
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The selftest was only attempting to delete the output file at the end of
the entire test run. This file should actually be deleted after each
subtest to ensure that it does not cause confusing errors if the next
subtest fails to overwrite the output file.
Change-Id: Ia3827926f71a697c6108de3f2b08c969f761d978
Reviewed-on: http://codereview.qt-project.org/5051
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed calls related to tests that were removed when redundant
logging functionality was removed.
Change-Id: Iaebbc109eaaddb440ae78e1f4a1b4e874a8b2960
Reviewed-on: http://codereview.qt-project.org/5050
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Use C++ comment delimiters consistently
* Use a space after control flow keywords
* Don't nest "else if" blocks unnecessarily
* Follow indenting rules
* Added comments describing some internal functions
Change-Id: I72fd1eaf5c5f3130945fbd2b64fa59e19ad2913d
Reviewed-on: http://codereview.qt-project.org/5049
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Commit 949be8cbdd modified the assert test
case but failed to update the line number of the assert in the expected
test output files.
Change-Id: I0d4f55c0b8bc1de8487dd8c6267aa459000cda26
Reviewed-on: http://codereview.qt-project.org/5048
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In C++11 push_back is overloaded to support rvalue-references,
void std::vector<T>::push_back(const T &);
void std::vector<T>::push_back(T &&);
so attempting to get the address for push_back is ambiguous.
Instead of hardcoding the function signature, the better and more
general solution is to allow the compiler to do the required overload
resolution itself, also allowing for implicit conversions to take place.
Task-number: QTBUG-18996
Done-with: Liang Qi
Reviewed-by: Olivier Goffart
(cherry picked from commit ca34cc75294e0d2a8bc491a2c679fe8a69cd0408)
Change-Id: Id271118e489f888905e491dd4cfc3d2db7697552
Reviewed-on: http://codereview.qt-project.org/4642
Reviewed-by: Liang Qi <liang.qi@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Some of the complex' widgets children can return
QAccessibleInterfaces.
Ideally all complex widgets should be removed, this eases the transition.
Change-Id: If3d7f28f97dac8cf5018a2c4c4b33709a3d4595c
Reviewed-on: http://codereview.qt-project.org/4788
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Make it inline; add fast checks for typical spaces;
add fallback function that uses the fastcall calling
convention.
On ia32, this change makes isSpace ~340x faster for
ascii spaces, ~170x faster for non-space ascii
characters, and ~1.3x faster for non-ascii characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the behavior
is the same.
Change-Id: I9438d0ad3c9ba2e80560c4bee7eed05115265798
Reviewed-on: http://codereview.qt-project.org/4905
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make it inline; add fast checks for ascii letters
and digits; add fallback function that uses the
fastcall calling convention.
On ia32, this change makes isLetterOrNumber ~120x
faster for ascii letters and digits, ~150x faster
for non-letter/digit ascii characters, and ~1.3x
faster for non-ascii characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the
behavior is the same.
Change-Id: Ia4e13692f4dd79f6aa0b96da29449e0487971b0e
Reviewed-on: http://codereview.qt-project.org/4904
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make it inline; add fast checks for ascii letters;
add fallback function that uses the fastcall calling
convention.
On ia32, this change makes isLetter ~370x faster for
ascii letters, ~250x faster for non-letter ascii
characters, and ~1.5x faster for non-ascii characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the
behavior is the same.
Change-Id: I06f8d3d43114537cee5567e670898cef6494c20a
Reviewed-on: http://codereview.qt-project.org/4903
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make it inline; add fast checks for ascii digits;
add fallback function that uses the fastcall calling
convention.
On ia32, this change makes isDigit ~370x faster for
ascii digit characters, ~250x faster for non-digit
ascii characters, and ~1.5x faster for non-ascii
characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the
behavior is the same.
Change-Id: I718fadecda3f591d6f4c22374d8e476f4724fd83
Reviewed-on: http://codereview.qt-project.org/4902
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The benchmark isn't exhaustive, but tests the functions
that are heavily used by QtDeclarative.
For performance reasons, QtDeclarative has its own
implementation of various QChar functions (in
qdeclarativeutils_p.h). But we want to make the actual
QChar functions as fast, so that QtDeclarative can also
use them.
Change-Id: Ic25f30651224c39f2824380d679b8500739f38c3
Reviewed-on: http://codereview.qt-project.org/4900
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gabi
Change-Id: I99b08f8b41f483c92ae175630b812e4b299069b6
Reviewed-on: http://codereview.qt-project.org/4916
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
QIcon has not been moved to QtGui after all, re-introduce
QtWidgets-dependent code path.
Task-number: QTBUG-21402
Change-Id: I61c37babaeceadf7d53c10736bcc847758adaf1b
Reviewed-on: http://codereview.qt-project.org/4775
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
prepareToRender() might call adjustSize() resulting in the widget's size
changing, so we should make sure to call adjustSize() _before_ we decide
on the required pixmap dimensions.
Task-number: QTBUG-21402
Change-Id: Ie72b46bc8e8e22f848769f78187f47ae9f4e37d3
Reviewed-on: http://codereview.qt-project.org/4772
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test attempts to enforce various conventions onto Qt's autotests.
Many of the things enforced by this test became obsolete from Qt4 ->
Qt5 (because Qt5 CI is much less "magic" than Qt4 CI).
The merge of `refactor' branch obsoletes even more.
The remaining valuable part of this test should be moved into the `qtqa'
module as a shared test, because it applies to all modules, not just
qtbase.
Change-Id: I2402bca32e43c597f14b8ff6ca729563ff8efbfe
Reviewed-on: http://codereview.qt-project.org/4926
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The test got moved one level down in the directory tree,
but tries to find the top level directory. Fix paths
to make it work again.
Change-Id: I7b80a1c6891e7f1aa013a89203f651aa3ea932e8
This QEXPECT_FAIL is obsoleted by Commit 2cca7e0884
Change-Id: I97bf9d8f0db50435b785bb1d2e1d60369d67aad2
Reviewed-on: http://codereview.qt-project.org/4764
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Necessary to avoid CI blocking.
The tests should be enabled again as soon as possible.
Task-number: QTBUG-21424
Change-Id: Ib25da5b9a1fdb23e00a5c503db90d306deb90f06
Reviewed-on: http://codereview.qt-project.org/4768
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Holger Ihrig <holger.ihrig@nokia.com>
Necessary to avoid CI blocking.
The tests should be enabled again as soon as possible.
Task-number: QTBUG-21424
Change-Id: Ibc54723855579095be0dea3bd3e071dd22a1fccf
Reviewed-on: http://codereview.qt-project.org/4825
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
This change disables failing tests to increase the
likelihood that 'make check' terminates with a zero
exit status. This is done to prevent the CI system
from blocking further commits once qtbase#refactor
is merged into qtbase#master.
Failing tests are marked as insignificant (by putting
'CONFIG += insignificant_test' in the .pro file).
Note: This is a temporary measure that needs to be cleaned up
once the refactor->master integration is complete.
Ideally all disabled tests need to be enabled and passing.
All changes will be marked by the string QTBUG-21402 in a comment
for easy location.
Task-number: QTBUG-21402
Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d
Reviewed-on: http://codereview.qt-project.org/4678
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This is simpler than the existing texture cache in QtOpenGL, as it only
serves the GL paint engine. There's one per context group, to simplify
the design and to prevent performance degradations.
Change-Id: I61e3c9a444d8e246a8b38da019a56f2c0a533c0c
Reviewed-on: http://codereview.qt-project.org/4674
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
a) don't detach until an occurrence found
b) don't memmove every time an occurrence found
c) truncate quickly )
well, numbers are better than words:
before:
RESULT : tst_QList::removeAll_primitive():
2,617,902 CPU ticks per iteration (total: 261,790,171, iterations: 100)
RESULT : tst_QList::removeAll_movable():
2,547,540 CPU ticks per iteration (total: 254,753,960, iterations: 100)
RESULT : tst_QList::removeAll_complex():
16,852,099 CPU ticks per iteration (total: 1,685,209,906, iterations: 100)
after:
RESULT : tst_QList::removeAll_primitive():
73,520 CPU ticks per iteration (total: 73,520,442, iterations: 1000)
RESULT : tst_QList::removeAll_movable():
90,422 CPU ticks per iteration (total: 90,422,464, iterations: 1000)
RESULT : tst_QList::removeAll_complex():
9,667,073 CPU ticks per iteration (total: 9,667,072,670, iterations: 1000)
Merge-request: 1285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit b209fe3b1a51f64541067917e96de99f14ad65f3)
Change-Id: Ia26036ed741cefcf4b5868b7b2fc5eae8130d3dc
Reviewed-on: http://codereview.qt-project.org/4577
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
as shortcutDestroyed(..) modifies the shortcuts list.
disconnect from shortcutDestroyed() first, or operate on a detach()-ed list
this was uncovered by QList::removaAll() optimization patch.
(cherry picked from commit e95de30977291a251660f72baa84b5ff244711fb)
Change-Id: Ie0b371c54458ce85f4d36430de8080a5e78d8b7f
Reviewed-on: http://codereview.qt-project.org/4585
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Commit 2cca7e0884 overloads
QTestLib so that QWindow * can be passed directly to
certain functions.
This fix disambiguates access to the new API by selecting
the QWindow * versions. This assumes that the QWidget *
versions are kept mostly for backwards compatibility.
Change-Id: I075196d86d8d1d38f7192dace3c3892d315bf671
Reviewed-on: http://codereview.qt-project.org/4655
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Commit 2cca7e0884 overloads
QTestLib so that QWindow * can be passed directly to
certain functions.
This fix disambiguates access to the new API by selecting
the QWindow * versions. This assumes that the QWidget *
versions are kept mostly for backwards compatibility.
Change-Id: I8755c86d5ebeb275dfa9162b0168d9179a61982d
Reviewed-on: http://codereview.qt-project.org/4640
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
The other/ subdirectory should still be built via other.pro.
This was overlooked by Commit 0a208dd413
Task-number: QTBUG-21327
Change-Id: Ie8ebd7dfc5b1dd56ca1b629aa011d160cb563ddd
Reviewed-on: http://codereview.qt-project.org/4526
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QOpenGLFramebufferObject must be wrapped in a QOpenGLPaintDevice
before being passed to QPainter::begin().
Change-Id: Ic82f8f17b2ea18a3790de7e75f0dd6c9092528ed
Reviewed-on: http://codereview.qt-project.org/4541
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: I189c108ee9943b15114becf9d6b04f78dbabbe31
Reviewed-on: http://codereview.qt-project.org/4389
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Use the new PCMPESTRM instruction (Parallel CoMPare Explicit-length
STRings with result in a Mask) which is added in SSE4.2 for
facilitating string operations. The "compare ranges" mode allows us to
search for characters outside the Latin 1 range and then use the
SSE4.1 PBLENDVB instruction to replace those with question marks.
Unlike previous SSE compare instructions, the PCMPxSTRx family allows
us to operate on unsigned 16-bit values. This saves us another
parallel add.
Reviewed-By: Samuel Rødal
(cherry picked from commit 45d2d36c9dbcbce403c78838ea52acd1ab111b68)
Change-Id: I0f9d864f9d19c0f0da43ccb6918dc28295074496
Reviewed-on: http://codereview.qt-project.org/4468
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Commit 079ec157f8 overloads
the touch event API in QTestLib so that QWindow * can be
passed directly to certain functions.
This fix disambiguates access to the new API by selecting
the QWindow * versions. This assumes that the QWidget *
versions are kept mostly for backwards compatibility.
Change-Id: Ib6b33edc64d81f300d4109d59fd29f25ccd605db
Reviewed-on: http://codereview.qt-project.org/4443
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The more the merrier.
Change-Id: I401ed97600a890c38cb4d5dbe0578d6bcf68e909
Reviewed-on: http://codereview.qt-project.org/4322
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
QNetworkProxy takes an hostname, not an url.
Change-Id: I7504fbc02a817d6c75ee55dc8bbdd66ec1e6cd01
Reviewed-on: http://codereview.qt-project.org/4373
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Some of these trigger pre-refactor as well by adding a QTest::qWait()
after QTest::qWaitForWindowShown().
Change-Id: I48863fd31fc0c3b51463ed922782e86c21f05bff
Reviewed-on: http://codereview.qt.nokia.com/4272
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This fixes a few bugs in QML mode name resolution and simplifies
our V8 patchset a little by folding some patches together.
Change-Id: Ia528a43ac8ccad95ac81bcdff5d05aaeab4b48b2
Reviewed-on: http://codereview.qt.nokia.com/4294
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
This autotest is using private symbols, available only when Qt is
configured with -developer-build.
Change-Id: I9bf221040b8225ed173761c7ee23e69efd85c3cb
Reviewed-on: http://codereview.qt.nokia.com/4148
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
Unmask the last character typed, not the last character in the string.
Change-Id: I9c70d2347bf878c18ab0a7f4ea76f755ca19a85c
Task-number: QTBUG-17003
Reviewed-by: Alan Alpert
(cherry picked from commit b98e9e69dd8ba33d5f01b9518d95b63b86c4b443)
Reviewed-on: http://codereview.qt.nokia.com/4165
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Many applications relied on the undefined behaviour that the
filesystem engines returned clean paths (despite the documentation
stating that they may not), and consequently suffered regressions with
Qt 4.8.
Unix paths are once again cleaned if necessary.
Windows/Symbian paths were already cleaned, but now use the utility
function to check if a path is dirty, to avoid duplicated code.
Task-number: QTBUG-19995
Change-Id: If8c18469f149291c9d079ae3da23bc2087bbd49a
Reviewed-on: http://codereview.qt.nokia.com/4154
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
The build-key is an old mechanism to work around binary
incompatibilities in GCC 3.x versions. Modern GCC has not broken binary
compatibility since 3.4, making this mechanism obsolete.
The cache value stored now only includes Qt version, the debug/release
boolean, and the last modified time for the plugin. Old 4-value keys
will be replaced with new keys as the plugins are reloaded the first
time.
This also removes QLibraryInfo::buildKey(), which is a source-incompatible
change.
The UNIX and Windows configure tools have been updated to stop
outputting the QT_BUILD_KEY preprocessor directive.
See also:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000892.html
Change-Id: I7d06969a370d3d2c6de413c1230d9d6789cbf195
Reviewed-on: http://codereview.qt.nokia.com/3977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QDir::operator== was creating a clean absolute path for comparison
purposes if the original path was relative.
However original absolute paths were trusted, even though they could
be unclean. Now they are checked for cleanliness first.
Task-Number: QTBUG-19995
Task-Number: QTBUG-20495
Change-Id: I047a1a40ae5151e4604085e4ac87f30a4e4979c4
Reviewed-on: http://codereview.qt.nokia.com/4099
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Also export two symbols for auto tests since opaque keys
need EVP_PKEY * created by openssl.
Change-Id: Ib7801ddfceb259de7291bfaa5940df87f68af97d
Merge-request: 48
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/4011
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
This doesn't make sense, none of the other benchmarks do it, and it
breaks compilation for a release-only mac build.
Change-Id: I3bc73f670688d413afcae7fa88bab19f7b3dac33
Reviewed-on: http://codereview.qt.nokia.com/4017
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This appears to serve no purpose.
It was probably copy-pasted from assert.pro.
Change-Id: Ie3d9605b969ee11f2d64c1ac3e480e9efb862a3c
Reviewed-on: http://codereview.qt.nokia.com/4016
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test intentionally crashes itself by using Q_ASSERT.
Since Q_ASSERT is a no-op in release builds, the .pro file was
attempting to always force debug mode for this project.
However, on platforms where debug vs release affect linkage (e.g. mac
and windows), this is invalid. On these platforms, debug mode can't be
enabled unless debug versions of the Qt libraries are available, which
they are not if Qt is configured with `-no-debug-and-release -release'.
Use a different method to ensure that Q_ASSERT really asserts, for both
debug and release builds.
Change-Id: I13eea2c72c77a0a981850dbcaa77f65f147c8490
Reviewed-on: http://codereview.qt.nokia.com/4015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Added Test for qmetaproperty
Marked QSocketNotifier Autotest as insignificant. See QTBUG-21204
Marked qtranslator Autotest as insignificant. See QTBUG-21125
Marked corelib/io/qfile/largefile as insignificant. See QTBUG-21175
Task-number: QTBUG-21066
Change-Id: I2a7f6587845c355091bb07c8dd3d1557d16db0be
Reviewed-on: http://codereview.qt.nokia.com/3598
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
By not waiting until deleteLater() kicks in it's easier to auto-test. We
can now add a test case for what happens when a shared resource is still
valid while the last context is destroyed.
Change-Id: I72963928e6a921e49ed59a79e2579b497ba37ccf
Reviewed-on: http://codereview.qt.nokia.com/3732
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Both the old and new XML loggers produce the Complete and Light XML log
formats, while only the new logger produces Xunit XML logs. The
disadvantage of the new logger is that it is more complex and doesn't
produce a partial log if the test fails to terminate gracefully. This
behaviour arises because Xunit format output cannot be written correctly
until all tests have been executed.
This commit removes the Complete and Light XML formats from the new
logger, using the old logger to produce those formats and the new logger
to produce only Xunit XML. Prior to this commit, the qtestlib selftests
demonstrate that the old and new loggers produce identical output for
Complete and Light XML.
This commit also removes the undocumented -flush command-line option,
which was used rather obscurely to select between the old and new
loggers.
The newer logger will be renamed to QXunitTestLogger in a subsequent
commit.
Change-Id: Id304f5b411bdd520409ee233f6bc34e8917942ab
Reviewed-on: http://codereview.qt.nokia.com/3923
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Basically breakage by <windows.h> being included from the OpenGL
parts of <QtGui/QtGui> included from <QtTest/QtTest>.
Change-Id: Id285fb89c64bf77e2408faac5688acd085579351
Reviewed-on: http://codereview.qt.nokia.com/3952
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The selftest for assert messages calls QEXPECT_FAIL if the assert
message doesn't exactly match the expected output. This is because
Q_ASSERT uses __FILE__, which is compiler-dependant.
The expected output for this test contains various hard-coded unix
paths meaning that the test never passes on any platform. This commit
removes those paths from the test data so that the test passes for
compilers that don't put path information in __FILE__. This commit also
makes the XFAIL message more accurate -- absolute paths in assert
messages don't come from QTestLib, they come from Q_ASSERT's use of
__FILE__.
Change-Id: I9aae212379b43a29ae83715717cc978b4b619420
Reviewed-on: http://codereview.qt.nokia.com/3908
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The toUpper/Lower() methods in QString should not
be locale dependent, as this can lead to rather
hard to find bugs in at least a turkish locale.
Rather have explicit, locale dependend case conversions
available in QLocale.
Reviewed-by: Denis Dzyubenko
(cherry picked from commit da0e1e101bb4c44c25b6523357fa81ad1b2d6539)
Change-Id: I1cc3f341bef17ad573a736dc94c9c5d514ace54e
Reviewed-on: http://codereview.qt.nokia.com/3259
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
regenerating blacklisted certificates with same serial number and
common name, but longer validity: Now they are valid for 10 years.
(cherry picked from commit a3d22777028b102b7f65cf2db9719f5d57308b04)
Change-Id: I7884484c2f61b3a55f671faa38967e62fc8954f0
Reviewed-on: http://codereview.qt.nokia.com/3894
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Marked Test for qdiriterator as insignificant. See QTBUG-21160
Marked Test for qresourceengine as insignificant. See QTBUG-21159
Task-number: QTBUG-21066
Change-Id: I72848a651ff3e7aff1d6105dd49124e4ed070a44
Reviewed-on: http://codereview.qt.nokia.com/3577
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The newer test logger did not produce the same light XML output as the
logger that it replaced. In particular, it did not output the <DataTag>
tag and it incorrectly nested a <Message> tag inside the <Incident> tag
when a fatal error occured in a test.
Unfortunately, it appears that the expected lightxml output for the
selftests was produced by running tests using the newer logger, while
the selftests did not use the older lightxml logger. Thus the errors
were not detected by the selftests.
This commit adds the older lightxml logger to the selftests, updates the
expected test data accordingly, and modifies the newer lightxml logger
to behave correctly. This last item is achieved by making the lightxml
streamer copy most of the code from the xml streamer -- lightxml output
is supposed to be same as xml, except for the omission of the root and
<TestCase> tags.
Change-Id: Ie6e1f69dd6000df2b9d0c5c8e2109fe7bbff3956
Reviewed-on: http://codereview.qt.nokia.com/3902
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For XML logs, an Incident tag with no sub-tags has a space before the
closing slash. For Light XML logs, this space was missing unless the
-flush command line option was supplied.
Change-Id: I6de2e140f9309f333b5b97ed7f8116e4e727a149
Reviewed-on: http://codereview.qt.nokia.com/3871
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The omission of spaces is crucial in order for the
regular expressions in configure to be able to detect
that v8.pro isn't a "main project" file.
Task-number: QTBUG-21168
Change-Id: I2e94736ee3195bed7fd528759b1bc1812f1ae54c
Reviewed-on: http://codereview.qt.nokia.com/3878
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
blacklist the leaf certificate for now. There might well be more fake
certificates in the wild, for that either the Diginotar.nl root cert
needs to be disabled on the system or OCSP would need to be enabled
(not supported by Qt yet).
Reviewed-by: Richard J. Moore <rich@kde.org>
(cherry picked from commit 70f6a1b91b242174682c30be976c2aa36c450cc7)
Change-Id: I7cd3fdc4c6e85202914764f983a60d301e54aa35
Reviewed-on: http://codereview.qt.nokia.com/3893
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Adding tests for QFutureSynchronizer and QtConcurrentResultStore
Added minor things in QFutureSynchronizer and QtConcurrentResultStore and removed tests for destruction
Task-number: QTBUG-21066
Change-Id: I9f088b89463340f339c914bcb37fb2f9d3b62057
Reviewed-on: http://codereview.qt.nokia.com/3477
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Ensure the right test macro is run.
Change-Id: I84d58038f25b000c05fd52e8bda92e4484d53a6e
Reviewed-on: http://codereview.qt.nokia.com/3805
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test attempted to ensure that tests/auto/auto.pro would only refer
to other .pro files, attempting to guarantee that the set of all tests
could be cleanly broken up. The purpose of this was to enable CI
optimizations (e.g. running the autotests for different modules on
different machines in parallel).
This test is invalidated by pending commits which rearrange the
autotests, and we never made use of this property for optimization
anyway, so drop this part of the test.
Change-Id: I23e712fb8ec1dbe7ac65fe66015e1f060f3dcd41
Reviewed-on: http://codereview.qt.nokia.com/3681
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
This test sometimes passes and sometimes fails.
Task-number: QTBUG-21098
Change-Id: Ic56e93d12a7b3fa2e9c135e25610bf1119fa636e
Reviewed-on: http://codereview.qt.nokia.com/3548
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
QTBUG-21102 is currently blocking integration of several commits.
Marking the test as unstable until the bug has been fixed.
Change-Id: I9b630767fd1aa4369564f5e90c63e850808385e1
Reviewed-on: http://codereview.qt.nokia.com/3584
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This autotest is not needed anymore since qtessellator was
removed by 78169e6b06
Change-Id: I438e5bf2fd44da73461bb6fc311a6dce5573e467
Reviewed-on: http://codereview.qt.nokia.com/3496
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Implement the IAccessible table2 interface for itemviews.
This is simpler than what we have in complexwidgets.
For now it is only used on Linux.
The new table2 interface is ifdef'ed to only be used on X11.
Improve handling of accessible events and clean up.
There are two xfails for the Table and Tree where sibling
navigation is not implemented yet.
Reviewed-by: Gabi
(cherry picked from commit e797ba558dddd45522b5a317316e497e9efc44a8)
(cherry picked from commit eff5ecc5d8f65fa25d6cfd6ed96a9d2a00d0c663)
(cherry picked from commit d29876008fad400bca8d6b37e5d5f61dd1bcb39d)
(cherry picked from commit 2a326fdc8f8bf2bd2c5764394616100906d9db2d)
(cherry picked from commit 9b72e79e20d0d3560e0b064b8b0d75e35feb720e)
(cherry picked from commit 075b0f744363842ed4179c644d933d461389544f)
Change-Id: I654f74991830ae1fc7df7cc91d930390fb88b2a4
Reviewed-on: http://codereview.qt.nokia.com/3274
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Create a libQtPrintSupport library that contains our current
printing infrastructure. Long term this will get replaced
with a libQtPrint, as the current architecture is not
really maintainable.
Change-Id: I7362fff6786b58c5b4e9213c23eda36d15048aa2
Reviewed-on: http://codereview.qt.nokia.com/3209
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Add boundary helper functions to the QAccessibleTextInterface.
Move LineEdit over to use QTextBoundaryFinder.
Reviewed-by: Jan-Arve
(cherry picked from commit c1ec1a95806cda54d5b4e9f8ed159a611bd75964)
Change-Id: Ib93599c49110aab50debe1e3fb0073dd34071c87
Reviewed-on: http://codereview.qt.nokia.com/3025
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
When a virtual object is registered with the SubPath option
it will handle all dbus calls to itself and all child paths.
It needs to reimplement handleMessage for that purpose.
Introspection needs to be implemented manually in the introspect function.
Reviewed-by: Thiago Macieira <thiago.macieira@nokia.com>
(cherry picked from commit b07919b3de8cff3e44b7271062372b14bcda5b83)
(cherry picked from commit 997c2dfed7a04da2fac577f1c29b89bda4939e2d)
(cherry picked from commit c676b7095d826dc2d006f52a4b234546af5e2137)
Change-Id: I003007604b286af8000959756ce9d25c17306f5b
Reviewed-on: http://codereview.qt.nokia.com/3051
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This was known to be unstable on mac, but appears to be unstable on
Linux also.
Task-number: QTBUG-20987
Change-Id: I760533c32cf13d24f8428f120813eb590b202182
Reviewed-on: http://codereview.qt.nokia.com/3131
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Wait for window shown on _all_ platforms, not just X11.
QEXPECT_FAIL a test which relies on QCursor::setPos, which is currently
unimplemented for qpa (QTBUG-20753).
Change-Id: I72412476afc7e52ccb6cab4306ff791b7e7d8d93
Reviewed-on: http://codereview.qt.nokia.com/3118
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
