sched_yield is standardized and on linux pthread_yield is implemented as sched_yield.
Building Qt for Android on OS X doesn't compile with the pthread version.
Change-Id: I1913afa83769805291e987f55b8f452299a43dce
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
On some platforms all windows are by default forced into fullscreen mode when show() is executed.
In QMdiSubWindow we cannot handle the fullscreen state and should ignore it. Otherwise
the window will be forced in "normal" state and ignore any previously
executed geometry changes.
Change-Id: I09ce6507a1eac6a0adb3405ca3f423642d30f801
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
[ChangeLog][QtGui][QGuiApplication] Add support for -icon command line
argument on X11, add -qwindowicon on all platforms.
Change-Id: Iacc602466699bf634d8b34aab7ed73c83fd9844f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
In the justification code, we unconditionally subtracted one
from the line_length, but then compared the result to 0 afterwards,
so we did not support when the line_length is 0 initially, which
can happen if it only consists of spaces (in which case
trailingSpaces will be non-zero and line_length will be zero.)
The fix is to bail out for both strings of length 1 and length 0.
[ChangeLog][Text] Fixed an assert when justifying a QTextLine
which only contains spaces.
Task-number: QTBUG-38520
Change-Id: Ib04993f47eb2f9f7fc49c4a5400f18f9682a72f2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The plain text edit's smart repaint logic in
QPlainTextDocumentLayout::documentChanged assumes that during a change inside
just one block, the block is in the state before the edit and a call to
layoutBlock() is going to bring it up-to-date. Then only a comparison of the
bounding rect - before and after - is going to allow for smart repaints.
The assumption of the layout being in the same state as before the edit got
broken by commit cc57a2e90f, which introduced
code to use a QTextCursor within a slot connected to QTextDocument's
contentsChange signal. The usage of the QTextCursor there ends up updating the
layout of the block ahead of time, breaking the assumption and therefore the
optimization, in the sense that during changes in the preedit that cause a
change of height / line count, the old bounding rect in
QPlainTextDocumentLayout::documentChanged and the new bounding rect will be the
same. This causes a repaint of only the edited block, missing repaints of the
following blocks, even though the line count effectively changed.
So what's causing QTextCursor to mess with the layout is the attempt of
updating the vertical movement x property. This patch inhibits the update,
marking it as dirty for initialization later. This means that slots connected
to this low-level signal cannot rely on the cursor's visual x position, but
that doesn't seem useful anyway and isn't required for commit
cc57a2e90f.
Task-number: QTBUG-38536
Change-Id: I5fae12d646a4b2d2cc22b9f2d021e5dc8cfdda94
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Increase window size when verifying that the scrollbar disappears
when using a small font on Windows 8.1
Change-Id: I7d4520bc5882d8ccd59db3f5bff7e9d6d68a4827
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
On Windows, DataLocation currently returns the value obtained by
passing CSIDL_COMMON_APPDATA to SHGetSpecialFolderPath(). This is
the local non-roaming path. For actually storing settings, the roaming
path should be used (CSIDL_APPDATA). Introduce new AppDataLocation to
return that path and AppLocalDataLocation for the local path and deprecate
DataLocation.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths now has new
enumeration values AppDataLocation, AppLocalDataLocation to be able
to differentiate between roaming and local paths on the Windows
operating system. DataLocation is deprecated in favor of AppDataLocation.
Task-number: QTBUG-38483
Change-Id: Ib1de8c7031a863ed5eac10c747de6f7ff1a090c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When stripping the root path from a file name that cannot be found
in the model, use case sensitive comparison depending on
file system.
Task-number: QTBUG-38162
Change-Id: I28e28973fca2da35a5768fdd00cc258b9669a15a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
VoiceOver expects press to open the combobox.
Task-number: QTBUG-37922
Change-Id: Iee7b7974db097e4e2444202c703bd587e1576fe0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
When QSqlQuery::at() == QSql::BeforeFirstRow and seek(1, true) (seek to
next record) is called the expected result is go to first row.
When QSqlQuery::at() == QSql::AfterLastRow and seek(-1, true) (seek to
previous record) is called the expected result is go to last row.
But in all cases the first and last are skipped.
Change-Id: I584138b3d397ce1c790bf89688ee92289a99611c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
... because they are too unstable. We can check whether they are more
stable once the new network tests server is in place.
Task-number: QTBUG-38385
Change-Id: I5ced7cc1f89290812aa88f174a41965fd2ef7252
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Change-Id: I2912dcca77270582f6e989b8b3fb72b82f6f70d6
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
isES() becomes isOpenGLES(). The library type enums are changed
DesktopGL -> LibGL and GLES2 -> LibGLES. This removes the now
unnecessary version number, the confusing "desktop" term and provides
better readability.
The old function/values are kept until the related qtdeclarative
changes are integrated.
Task-number: QTBUG-38564
Change-Id: Ibb0a1209985f1ce4bb9451f9b7b093c2b68a6505
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Introduce QTRY_COMPARE to let the sorting finish instead
of a hard-coded time-out.
Task-number: QTBUG-29403
Change-Id: I813bf6bcfe7110f49a5b95db589ed8a3f559db89
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Use QTRY_COMPARE for dirChangedSpy, remove all unneeded
remove()/setPermission() calls (originating from the time
the test did not use QTemporaryFile), add more QVERIFY()
and messages for the other operations.
Task-number: QTBUG-30943
Change-Id: Ib3b78b1c6922539fd5e9238aa017fcdb554aacc8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
selectFile(): Ensure dialog is destroyed before the temporary file
to prevent leak.
selectFiles(): Introduce scopes to prevent co-existence of 2
instances of QFileDialog, which causes warnings from file watchers
and occasional crashes in accessibility.
Discovered while investigating:
Task-number: QTBUG-38414
Change-Id: I94d2bb3e05538416286641cb08a88d8b3837a8a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
And move the default argument from the deprecated constructor to
the new one
Also make sure that the error number is consistent across the
two constructor
Change-Id: I3721266b39ab493f0add35b2d1f892b2f6094992
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The SSE2-based conversion only kicks in with strings with 8 characters
or more in length.
Change-Id: Ic1daad0845571be03547553cc001d83550f0c89c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Commit 125bb81bef wasn't enough. Let's
just make it simpler and use a regular function.
Change-Id: I9627dedaa87873b4b138224afd182e4fd9a55265
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The ability to set a container to be unsharable has very little use and
it costs us an extra conditional for every refcount up and possibly
down.
This change is a no-op for current Qt 5. It shuffles a few things around
just so Qt can compile if you define QT_NO_UNSHARABLE_CONTAINERS. That
is done to ease the fixing of the code in Qt 6 and to make my life
easier: I'll keep that defined in my local Qt build so I can catch any
misuses of this deprecated API.
The newly deprecated methods are not marked QT_DEPRECATED because the
bootstrapped tools wouldn't build -- they're built with QT_NO_DEPRECATED
defined, which causes build errors.
[ChangeLog][QtCore] The setSharable() and isSharable() functions in Qt
containers has been deprecated and will be removed in Qt 6. New
applications should not use this feature, while old applications that
may be using this (undocumented) feature should port away from it.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-February/015724.html
Change-Id: I789771743dcaed6a43eccd99382f8b3ffa61e479
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
8dd47e34b9 removed the handling of the
BOMs but did not document it. This brings the behavior back and adds a
unit test so we don't break it again.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016532.html
Change-Id: Ifb7a9a6e5a494622f46b8ab435e1d168b862d952
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The "data" pointer became technically dangling after line 1866 did
copy = data;
as copy was the last reference to the original data. That made the
pointer address available to be reused by the system malloc(), which
sometimes happened, causing the unit test to fail.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016588.html
Change-Id: Ifa6a27bd53a6e60392b77a6609f2d47148695211
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For now only xcb on GLX is supported. Other platforms will follow later.
Add also some missing documentation for the platform OpenGL context factory
functions.
[ChangeLog] QOpenGLContext is now able to adopt existing native contexts.
Task-number: QTBUG-37552
Change-Id: I5dd959f102df178f646b2df5989203b5dc6de376
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Added the function pointer constructor to QSignalSpy to take advantage
of the new connect syntax.
Change-Id: I94218a096c677cdba73e1b2cfa8b9c09bc28145f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Its purpose in life will be to describe pixel formats
[ChangeLog][QtGui] Added QPixelFormat class
Change-Id: I74d8f974606520efb3935110ff3d6ddb5ea805a8
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
IteratorOwner pointer specialization was failing for void* because of
an invalid function overload.
Change-Id: I80355ddd2b871c1fa2fa5bf5a4ed8bc7768fc3c9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Revert 3bb9024952. That fix was an attempt
to handle the issue that has been fixed in 5.3 by
9063edef79 and should have been reverted
when the new approach, that restores Qt 4 behavior for widgets, was
introduced.
Task-number: QTBUG-38242
Task-number: QTBUG-36423
Change-Id: I8f8a82da22605fac90543492e9b2cd2b568544e7
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
These hooks only worked reliably with LD_PRELOAD on Linux/GCC, on other
platforms they depended on what exactly the compiler optimizer is doing
as well as some nasty assembler rewriting to actually access them. The
new system uses a simple array of function pointers that can be set to
custom hooks by tools that need this (based on ideas from Andre Poenitz).
This also covers qt_startup_hook (similar problem), and the Qt version
number that Andre had asked for.
Change-Id: I2c3e7950fd49b1b1d04176be34c2fff3293981b0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The comment shows to which string a QT_MOC_LITERAL is pointing.
Change-Id: Ia389d750b1b1c21e2242bad6beceea4f9298ff8e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Show translates to showFullScreen on some platforms. This patch
replaces show with showNormal in the "task248604_infiniteResize" test.
On BlackBerry the test is skipped because all top level windows are forced
fullscreen by the platform.
Change-Id: Ia974c3fcbd0c71c107f4cc3f8405b8ef79ffb5b7
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
On QNX a window can only be activated if it has either a egl surface
or a raster backingstore.
Change-Id: If075093e39f1553eb8b25e35f7d372b1b15aa8af
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
In "task177022_setFixedSize" show was replaced with showNormal because on QNX
and some other platforms show translates to a showFullScreen.
For BlackBerry the test is skipped because the first top level window
is always forced into fullscreen mode.
Change-Id: I9df37c6bc47b47cbad4a1623b3eafa723abc6714
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
The style is dpi dependent. I.e. on high dpi displays the pixel size of
sections and rows of a QTreeView will be larger.
Change-Id: I7477bfdd641d4db67973cafef5147f026f72c111
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Make it closer to the Unicode specs (UAX#24):
* Common now inherits the preceding character's script, if any;
* In a combining character sequence, if the base character is
of Common script, the entire sequence is treated like if it were
of the first non-Inherited, non-Common script in the sequence.
See http://www.unicode.org/reports/tr24/tr24-21.html for more details.
[ChangeLog][QtGui] Fixed regression in arabic text rendering.
Task-number: QTBUG-28813
Task-number: QTBUG-29930 (related)
Task-number: QTBUG-35836
Change-Id: Id85761965b08ca94c674d5f3613fe58b82b2ce9c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Ahmed Saidi <justroftest@gmail.com>
For AAT shaping support, we need either the pre-QPA shaping trick
or the new HarfBuzz on Mac; prefer the latter.
Disable some test cases aimed to test the HB-old behavior; enable ones
that should guarantee shaping-unaware behavior.
[ChangeLog][OS X] Use CoreText text shaping engine for support of
complex scripts. If required, the shaping engine used in previous
versions can be preferred by configuring Qt with -no-harfbuzz.
Alternatively, the QT_HARFBUZZ environment variable could be set to "old".
Task-number: QTBUG-18980 (relates)
Task-number: QTBUG-38246
Change-Id: Iee6fe4f5bc047e77259182b8585385c5febd02b3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
QStringList = QList<QString> already compiled, but was interpreted as
QStringList = QStringList(QList<QString>), which involves the QList
copy ctor. Adding the overload saves that copy.
Cannot use a using declaration here, since the return type is different.
Change-Id: I9f4feb2f97480d2d6a3b6fa7c71b5d511b623601
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMacStyle::styleHint(SH_ScrollBar_Transient) wants either a style
object or the widget argument in order to return correct values.
Change-Id: I2fdef0820334fa66e076a4734eb2a30c722c841c
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
The tests expect a home folder which usually is not present on QNX
Change-Id: I44f548a95f14414c0db6f752fd115696069a7b90
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Despite supporting DH and ECDH key exchange as a client, Qt did not provide
any default parameters which prevented them being used as a server. A
future change should allow the user to control the parameters used, but
these defaults should be okay for most users.
[ChangeLog][Important Behavior Changes] Support for DH and ECDH key exchange
cipher suites when acting as an SSL server has been made possible. This
change means the you can now implement servers that offer forward-secrecy
using Qt.
Task-number: QTBUG-20666
Change-Id: I469163900e4313da9d2d0c3e1e5e47ef46320b17
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
FAIL! : tst_QNetworkReply::ioPostToHttpUploadProgress() 'args.at(0).toLongLong() != sourceFile.size()' returned FALSE. ()
Task-number: QTBUG-37449
Task-number: QTBUG-24226
Change-Id: Idcc0ceac0332705b1e3a073d40fa8098bea2c9f3
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Some margines and sizeHints are DPI dependent on QNX and BlackBerry.
This patch skips two test that expect the section size to be of a
certain pixel size.
Change-Id: I7869f77fc2b623e091f53e420d1a4fdb3ec30724
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Added new options:
- silent to suppress the noice from ext tools, making it easier to
parse failed test cases.
- ci, to check test insignificance. Requires QMake::Project cpan
module if used.
Also added printing out results after each test as well as full
summary after test run is complete.
Task-number: QTQAINFRA-641
Change-Id: Ie5f02710a939f7526e0dd39979a0cd97ed19f55b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The big change is that we now keep the id objects representing accessibles
around so that they are persistent for ATs.
This improves performance of Mac accessibility significantly.
This is required for notifications which are now sent so that many things work much better,
for example the VoiceOver focus follows the keyboard focus.
The parent element in QCocoaAccessibleElement was removed, we can
dynamically access it more reliably.
Change-Id: I686d212f40d28b392dcc22f16f3c3430f08bdc98
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Add messages to comparisons and expect failure of blockSize()
on Windows.
Task-number: QTBUG-37822
Change-Id: Ie71d35a3d1ba0e52c93d5ba3fd7e92465b170d49
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
On BlackBerry first window is always shown full screen. However, many
tests rely on a specific window size. A dummy full screen window is
created so subsequent windows have correct size.
Change-Id: Id8bd0212b6eca677953e78505459e3cd69bc6328
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
... and not only one. This was a problem e.g. when there were several
requests to the same host and the host was not reachable; only one
reply would get an error signal in case we suppressed other errors in
"happy eyeballs" host lookup style.
Task-number: QTBUG-36890
Change-Id: I1b5757498bd644b0d773cf6c43e4950620949c5c
Reviewed-by: Richard J. Moore <rich@kde.org>
Now menu items and key shortcuts for Cut, Copy, Paste and Select All
work in the standard ways in dialogs such as the file dialog, provided
that the corresponding QActions have been created and added to the menu.
This depends on new roles to identify each menu item which is so
broadly applicable that it should work even when a native widget has
focus; but the role will be auto-detected, just as we were already
doing for application menu items such as Quit, About and Preferences.
When the QFileDialog is opened, it will call
redirectKnownMenuItemsToFirstResponder() which will make only those
"special" menu items have the standard actions and nil targets. When
the dialog is dismissed, those NSMenuItems must be reverted by calling
resetKnownMenuItemsToQt(), because to invoke a QAction, the NSMenuItem's
action should be itemFired and the target should be the
QCocoaMenuDelegate.
Task-number: QTBUG-17291
Change-Id: I501375ca6fa13fac75d4b4fdcede993ec2329cc7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
For Mac this makes QTextEdit work nicely with VoiceOver.
Task-number: QTBUG-37204
Change-Id: I1326d24ca6a932ad667ee395f62881b6ec64e892
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
We can squeeze, but not by discarding elements. Make sure the size of
the object stays intact after changing the reserved capacity.
I've also added unit tests for other containers, just to be sure.
Task-number: QTBUG-37750
Change-Id: I5135b095943b7589423c51cebcb52af792468e61
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The code did discard the the data, so it wasn't affecting the comparison
result (tests added anyway), but it could cause crashes if the pointer
to the beginning of the data in the first 8 bytes of a page.
Change-Id: I618e68de329b65de34ef8c934934c3e631cc6c9f
Reported-By: Erik Verbruggen
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
It doesn't depends on windget for quite a long time already.
Change-Id: I251e2e0d52028d17a61c892308d099f344728e79
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
That #ifdef is placed before any include, so it has no effect.
Change-Id: I4bbf967bda720d287b363847669c5c7a22807bc4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Actually guarantee cursor doesn't move in this case for both logical
and visual modes (just what the documentation says we already do ;)
Change-Id: Iabdca7aa1d205672386a0095e3487e585611cdb5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To guarantee proper positioning at the end of the last line in a
bidirectional text we have to insert the eol position into the
insertion points vector, accordingly to the visual ordering.
Detection of the last *logical* item in a *visual* line is unrelaed
to the text direction, it is simply `iterator.item == iterator.lastItem`.
[ChangeLog][QtGui][QTextLayout] Fixed visual cursor movement
in bidirectional text.
Task-number: QTBUG-18060 (partially related)
Change-Id: I53b6ab889ef580ab0560b620b808b1e09efc0fbd
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Ahmed Saidi <justroftest@gmail.com>
Initialize directory delayed in shared code and add checks to verify
that it is valid. Close attached / cloned databases to prevent locks
on files and leaking temporary directories caused by SQLite:
QTemporaryDir: Unable to remove "...\Temp\tst_qsqldatabase-P1XkOA" most likely due to the presence of read-only files.
QTemporaryDir: Unable to remove "...\Temp\tst_qsqltablemodel-P1XkOA" most likely due to the presence of read-only files.
QWARN : tst_QSql::concurrentAccess() QTemporaryDir: Unable to remove "...\Temp\tst_qsql-l0VAKJ" most likely due to the presence of read-only files.
Change-Id: If85bbaed04bb1a32e427d642be332996d967f796
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change b94493e revealed that in the lance script rendering, at the
surface_end command, cleaning up the fbo stuff and enabling the
ordinary painting again was done in the wrong order.
Change-Id: I358dafeffe95b25303fc2a8dc1d61384b2ca64fb
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
One problem was that tests expect the top-level window to have a certain size,
which is not possible on BlackBerry. Another problem was that certain elements have a
dpi dependent size which the task250754_fontChange test did not consider.
Change-Id: I465ebe234a74d6150cdcbb7fc7e458a62155e0d0
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Using show() might result in showFullScreen() on some platforms,
so let's use setVisible(true) which has the same effect and seems
to be a more crossplatform solution.
Change-Id: I712584ace2adbe73b99e620a1ae5e88ff328fffb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Some quick benchmarks against GNU coreutils 8.21 and OpenSSL 1.0.1e
(time in µs; time for coreutils and OpenSSL include the loading of the
executable):
Qt Coreutils OpenSSL
n SHA-1 SHA-224 SHA-512 SHA-1 SHA-224 SHA-512 SHA-1 SHA-224 SHA-512
0 0 0 0 717 716 700 2532 2553 2522
64k 120 484 381 927 1074 966 2618 2782 2694
Diff 120 484 381 210 358 266 86 229 172
The numbers for Qt are pretty stable and vary very little; the numbers
for the other two vary quite a bit, since they involve launching and
executing separate processes. We can take the lesson that we're in the
same ballpark for SHA-1 and we should investigate whether our SHA2
implementation is sufficiently optimized.
Change-Id: Ib081d002ed57c4f43741eca45ff5cd13b97b6276
Reviewed-by: Richard J. Moore <rich@kde.org>
This patch removes two memory allocations from the algorithm.
Change-Id: I9366f9c5ce02fb1cae8adfbd8dff36c7f23af2a7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
One issue was that the text of a QPushButton would stretch the widget if the
platform font is to big. The other issue was that the autotest did not expect
that show might translate to a showFullScreen on some platforms.
Change-Id: I3a9903979d766d04c402fda309d0492cfa506ed6
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
In the sizeHint test the show command was replaced by showNormal.
This fixes the test an all platforms where show translates to
showFullScreen.
Change-Id: I307790a6987c61a57679094b26818383815036a0
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Only accept lower-case "true" and "false", as documented.
The old check didn't match either the documentation, nor the QSettings/
QVariant behavior (where, for a boolean value, any lower-cased content
that not empty, "0" or "false" is considered true).
Change-Id: I317d29c16a27f862001b9dff02e8298df8acf5a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
The QDataStream version with which QPicture was previously serialized
with was hard-coded to 11 (Qt 4.5). This prevents features of
serializable types used by QPicture from being serialized if they
were added after Qt 4.5; namely features of QFont like
HintingPreference.
[ChangeLog][QtGui][QPicture] QPicture now serializes its data properly
by also accounting for QDataStream versions greater than Qt 4.5.
Task-number: QTBUG-20578
Change-Id: Idd27682b187f4d4a3695c52bbf68e84853c024a8
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Patch 9a08483d76 introduced a regression,
tst_qmetatype test was not meant to be removed.
Change-Id: I5456ffbbd9d9f8e461f828c6183e46dabf67952b
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On QNX grabbing the frame buffer returns the content of the back buffer.
In order to execute the OpenGL tests properly a swapBuffers is executed before
in order to be able to retrieve the content of the front buffer.
The patch also documents this platform behavior.
Change-Id: I7a501818ec6eea061f2f54f95854f68cb72e0534
Reviewed-by: James McDonnell <jmcdonnell@qnx.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Check whether a detach happened, and also check that non-consecutive duplicates
are properly removed.
Change-Id: Iac7a3d8fe5ed5a69a9a0b55ddbf95308f11122c2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QStringList << QList<QString> already compiled, but was interpreted as
QStringList << QStringList(QList<QString>), which involves the QList
copy ctor. Adding the overload saves that copy.
Cannot use a using declaration here, since the return type is different.
Change-Id: I119cc98e7e2df24549a1abb158543b729edc30ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The new flag ItemContainsChildrenInShape is similar to the existing
flag ItemClipsChildrenToShape. Setting the new flag makes QGraphicsScene
assume that children are drawn within the shape of the current item
but this is not enforced by clipping. When an application manually
ensures this clipping boundary, setting the new flag removes the
overhead of enforcing the clip with ItemClipsChildrenToShape, while
still allowing other routines to behave more optimially by assuming
children are within the shape of the current item.
[ChangeLog][QtWidgets][QGraphicsItem] Added the
ItemContainsChildrenInShape flag that enables using optimizations
of ItemClipsChildrenToShape without the overhead of enforcing the clip.
Change-Id: I5496fe1ca331b77fd51e0df8a3ace2b8e939eaf2
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Some data was never serialized (styleName, hintingPreference) and
some was incorrectly serialized (styleStrategy). This change also adds
auto tests for every applicable QDataStream version.
[ChangeLog][QtGui][QFont] QFont now serializes its data properly,
without any data loss.
Task-number: QTBUG-22814
Task-number: QTBUG-22946
Change-Id: I34e61b10662b7ad6c57054dacc7e1f522f5b5c5d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch aims to provide an updated test that follows changes started
in 10.7: new rule is that only root can access SystemScope settings. It
also disables the sync() workaround code path which is at least not
executed during the tst_QSettings execution and returns wrong value to
the test.
From Apple's documentation:
"Note that modification of some preferences domains (those not
belonging to the “Current User”) requires root privileges (or Admin
privileges prior to OS X v10.6)—see Authorization Services Programming
Guide for information on how to gain suitable privileges"
https://developer.apple.com/library/mac/documentation/CoreFoundation/Reference/CFPreferencesUtils/Reference/reference.html
[ChangeLog][QtCore][QSettings] QSettings now returns the correct value
for isWritable() when using SystemScope settings.
Task-number: QTBUG-9824
Task-number: QTBUG-21062
Task-number: QTBUG-22745
Change-Id: Ib6a1490ec596b99d189ec4de9a0f28ecfd684172
Reviewed-by: Liang Qi <liang.qi@digia.com>
In tst_QEvent, add a check that exhausts the available event type ids and verifies
that registerEventTypes() returns -1 in that case, as documented.
I haven't found a way to test the other case in which -1 is returned.
Since this test operates on a global write-only registry the new test case needs
to keep track of whether the earlier test cases have run successfully. If they
didn't, skip this test case.
Change-Id: I68ea9d17d10dcec22175994aba269dd09c9adf43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A test for a hint > QEvent::MaxUser was missing.
Added.
Change-Id: I00c1c45f6673f35d4203df15b4ffc35f57273e46
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes failures on Windows 8.1.
Task-number: QTBUG-37822
Change-Id: I30460f430e2249555c4e857237e27aa9b03dfa1b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Change the test widget to use a non-single-shot timer
to hide the menu once it has become visible.
The test shows hangs on Windows 8.1 CI nodes.
Task-number: QTBUG-37822
Change-Id: I8fc782e53256616119920aef714f89f25863b39f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Ensure triggered() and task176137_autoRepeatOfAction()
are using an active main window. Change click timer in
triggered() to repeat until the menu is visible and
add a timer to close the widget and bail out if the
simulated click fails to close the menu.
Task-number: QTBUG-37822
Change-Id: If675660d02335bffd5caa89796914924dad1a909
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
QFontDialog should always show the correct size, even if the size
is not available in the list of standard font sizes. Native font
dialogs across common platforms show the correct size at all times.
Inside init() function, the size list requires proper initialization
since the initial value of size is zero.
Task-number: QTBUG-10317
Change-Id: Idc9e922ac95f797ac98bbf6c885e52828c4c48fd
Reviewed-by: Liang Qi <liang.qi@digia.com>
The calculation of the width/height required for the
scaling algorithm was prone to floating point rounding
issues, where the lower value got rounded down, the higher
one rounded up. This could lead to a situation where we
iterated over one more line/pixel in the line than we have
in the source image.
Correct this by passing the dimension of the source image into
the function and bounds checking the values before iterating.
Task-number: QTBUG-35927
Change-Id: If44b2235a479224660d508a0504fec40d724763a
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
We don't support xlfd fonts anymore and indeed QFont::setRawName()
is an empty method.
[Changelog][QtGui] QFont::setRawName() and QFont::rawName() are
deprecated.
Change-Id: Ic52d42a9bc200ba8b246dd4e28c77f84e086dad5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
- Record the last event ID with every callback. This event ID is passed
to FSEventStreamCreate when restarting the stream, so the watcher will
receive all events that occurred since invalidating the previous stream.
- Never start with kFSEventStreamEventIdSinceNow, because this will
generate a (bogus) soft-assert in FSEventStreamFlushSync in CarbonCore
when no event occurred since stream creation. The last globally
generated event ID is used instead to simulate the "now".
- Do not dispose and recreate the stream in the callback, but use a
queued signal-slot connection to schedule this on thread that owns the
watcher.
Change-Id: I02f5a845d9e27f9853ed97925ab9c7a5bc0dede1
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Introduce function checking whether the system settings in
native format can be written to. If not, default to user scope or
skip the respective tests instead of failing.
Task-number: QTBUG-37822
Change-Id: I330aff9b79bb22254216f022af807e010bc8e8ba
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
After a test ended, we would instantly try to fetch its output,
but at this point, it might still not be available through the
adb interface, probably due to some cache synchronization in the
file system? Adding an arbitrary three second pause between
finishing the test and requesting the file fixes this. If the
error pops up later again, we could do something more robust,
like going in a loop for X seconds until the file has been fetched.
Especially if detecting task finish was successful.
Task-number: QTBUG-37444
Change-Id: I5442e1e0181f489b0626834a390e46c15bc0b371
Reviewed-by: Simo Fält <simo.falt@digia.com>
This patch fixes an issue when a font that was added with
QFontDatabase::addApplicationFont can not be removed any more.
The reason for that is that QFontconfigDatabase::addApplicationFont
adds the font to the FontConfig application set from where it
cannot be removed any more and is picked up every time the font database
is repopulated (e.g. after a call to QFontDatabase::removeApplicationFont).
This also fixes the QFontDatabase autotest which unfortunately does
not fail on linux, because it tries to add "FreeMono" (which in most
cases is already there as a system font). So this patch removes FreeMono
and adds LED_REAL as test font.
Change-Id: I70fc823075923aa426da1eb3e052affcc416e399
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
On QNX a actual platform window is not created unless the window is explicitly
postet (raster) or a swapBuffers (opengl) is executed.
Change-Id: Ia06b97ea1a477d59e78d74d895c5d6ba6dd86edf
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
This simplifies how we handle QNSView for accessibility purposes.
Instead of trying to half-merge the top level widget
(window->accessibleRoot) into the view, just have the view
always return it as child.
This makes the accessibility implementation for QNSView simpler
and makes applications that show a top level widget such as a button
possible. (We would return accessibility ignored for the button before).
As a side effect finding the active focus and hit-testing should be more reliable as
well.
Task-number: QTBUG-37794
Change-Id: Ib52037f88da8887a0bdc77204b0f3daddfe7709d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This test takes more than 5000ms to finish some times, so waiting
for 10000ms should be enough to make it more stable on all
platforms.
../tst_qprocess.cpp:1072 :: [gui app]
QTestLib: This test case check ("proc.waitedForFinished") failed because the requested timeout (5000 ms) was too short, 6150 ms would have been sufficient this time.
Change-Id: I266ad0e65bf3c84e73b7ca6543dc15335dad4c99
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Extending this to stock QNX as well since it is not
BlackBerry 10 specific.
- tst_QNumeric::floatDistance()
- tst_QNumeric::floatDistance_double()
- tst_QtJson::testNumbers_2()
- tst_QtJson::toJsonLargeNumericValues()
- tst_QtJson::parseNumbers()
Task-number: QTBUG-37066
Change-Id: If0e5d4fbefac5e8a0efed8ef8b1b7655ff6e7766
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Constructing a QCollator is somewhat expensive, and made
localeAwareCompare really slow. As QCollator (at least with
the ICU implementation) is not thread safe, use one collator
per thread. This speeds up collation of a long list of strings
by a factor of 250 for the test case in the bug below.
Task-number: QTBUG-36149
Change-Id: I645cdc3546347d1dcc7a03b7563b628c7f756944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Output the SSL library version, output socket error string on connection
failure consistently, silence numerous warnings about QIODevice not
being open in tst_QSslSocket::constructing.
Change-Id: Ia23d42de5b2daca55b2f6f50af025d61e99c52a0
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Add more insert() tests, since the existing ones only covered
the index-based insert() variant and only movable types.
Change-Id: Ifce7a67be0bef45f926f13521873a1d77430e1e3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add all the available QPrinter options to the QPrintDialog manual test
to allow for testing presets.
Change-Id: Ia6394094fc9920da0d6c645793d51650404899d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Convert the manual print dialogs test to use a ui file as subsequent
changes will add a lot more widgets.
Change-Id: I06ac54b67532f0eea1e91a2d9aca4f587d2fa332
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The text shaping process has been unified for all platforms.
Task-number: QTBUG-23064
Task-number: QTBUG-24565
Task-number: QTBUG-26495
Change-Id: Ida4c4be85f1a72c04399d2e6760fa36b33a0464e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QQuickWindow depends on maintaining state of known touch points
between events, so it needs to be notified when it will not be
receiving the corresponding release event for one or more.
This temporary fix needs to be reverted when we have a proper
event forwarding solution.
Task-number: QTBUG-37371
Change-Id: I5dc40af6feac425be8103c1586f8ebe3a6aad20d
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This was a regression from Qt 4.7.
[ChangeLog][Widgets][QScrollArea] Respect scrollbar setting for
click-position on Mac.
Task-number: QTBUG-36314
Change-Id: I8bdb1aec9b308b0907f5db29d3519998bc843c18
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
tested manually with internal proxy.
Patch-by: Jonathan Lauvernier <Jonathan.Lauvernier@gmail.com>
Change-Id: Ief5b4579b3444ce70eb99637edf771d37d3971fb
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
The flag is not orthogonal to the rest, and e.g. checking with
flags & Invalid
will fail. Rather make it explicit by comparing with 0.
Change-Id: I428d5e71f5ecd05f61d543aaa78532548ef93d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
During the Qt 4 -> 5 migration the setting of the extension flags
in QOpenGLFunctions/Extensions suffered a regression: flags like
GenerateMipmap were never set. This led to the unfortunate sitation
that features that were tied to these flags, like compressed texture
support or mipmap generation, got disabled.
This is now corrected by checking for the extensions like Qt 4 did.
Task-number: QTBUG-37588
Change-Id: I4a7beb1b435af11e05f5304aa04df2ec63b34c18
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Print a warning when an invalid logging rule is parsed.
Change-Id: I3bf9a6df4053d36b3803652b2faa86168d5222bc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
EditableTextInterface was implemented but not reported to the
accessibility bridges.
Newlines in QTextEdit when using QCursor::selectedText are returned as
unicode paragraphs, replace them by newlines.
[ChangeLog][QtWidgets][Accessibility] Fixed QTextEdit not reporting
newlines to accessibility frameworks and add editable text interface.
Change-Id: Iac21e70f5468a16f8abf242ae148290dbab3f8e4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Adapt the stringification code, that is used to produce the
keys for QSqlQuery::boundValues() return value, to keep the
right order of the binding values.
Task-number: QTBUG-12186
Change-Id: Ic11a455bfd9ffd1418b1b021ce5cf78cae9b4504
[ChangeLog][QtSql] Fixed the order of values with positional binding in a QSqlQuery
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The test relies on active focus, so activate the test window in
the beginning of the test to avoid undesired focus widget changes
by QApplication::setActiveWindow() during the test.
Task-number: QTBUG-36395
Change-Id: I6febec7d552224b1754aaf57520ed6d435d29563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This test waits for window activation and gets disturbed by mouse
movements.
The test duration is not long enough to justify the flakyness (around 10
seconds on my laptop).
Change-Id: I985044f954c09442220db3ca318045c04ef6bb77
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
The minimumRenderSize is a qreal value that is used as a lower bound to
determine what items are visible when a scene is rendered. If an item's
view-transformed width or height are less than minimumRenderSize then
this item is considered to insignificantly affect the final result and
is not drawn. If the item clips its children to its shape they are
automatically not drawn. This greatly reduces the drawing overhead
for scenes with many items rendered in a zoomed out view.
[ChangeLog][QtWidgets][QGraphicsScene] Added the minimumRenderSize
property which can be used to speed up rendering by not painting
items, smaller than a give size.
Change-Id: Ie208234707dffb4d2fc620fc5d1514e0c144d9a8
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The page size test can get confused when two printer papers have the
same size, but the code being tested is actaully correct. Put a temp
QEXPECT_FAIL on the test and some debug statements so we can see why it
fails and fix the test as required.
Change-Id: I160ba2ed7344500d89bdcb9bb416863713fef84b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix the QT_NO_PRINTER build for issues that have accumulated over last
few months, and in the new changes already approved.
Change-Id: I9aed21dee861837fd1a68a96692c873a4f5be293
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Using QPageSize internally provides the Windows ID on all platforms so
remove the conditional compile on the QPrinter api and add support to
the print engines.
Change-Id: I31e23d5090a9b6ceb087c29dead050b0ee1855a5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use QPageSize and QPageMargins to get/set values in the print engines,
add api to directly set the values, and rewrite the docs to make the
paper-based api obsolete instead of the page-based api.
Add new PPK keys to pass QPageSize, QPageMargins and QPageLayout to the
print engines to ensure no level of detail is lost, e.g. for custom
sizes passed to QPrinter.
[ChangeLog][QtPrintSupport][QPrinter] QPrinter can now use QPageSize
and QPageLayout in the public api to control the page layout for a
print job.
Change-Id: Iee39a4042bcd6141d29b0a82b49066d7a7a78120
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change the Windows QPrintEngine implementation to use the
QPlatformPrintDevice to obtain device information, and use QPageSize to
obtain page size conversions. A following change will use QPageLayout
to store that page size.
Change-Id: I990943e2b62ab6dab2c4d4a292c7ed7261beadf2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to QPdfWriter for QPageSize, QPageLayout, and resolution.
[ChangeLog][QtGui][QPdfWriter] The QPdfWriter now supports setting
the PDF orientation, layout and resolution by using QPageSize and
QPageLayout.
Change-Id: I9c269f997ec540dac1989f355c6a2e7488947966
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change the QPrinterInfo implementation to use QPlatformPrintDevice as
the backend. Remove all the old QPrinterInfo related code from the
QPA plugin. Add public api to QPrinterInfo to support some features
from QPlatformPrintDevice.
[ChangeLog][QtPrintSupport][QPrinterInfo] Added new public api for
isRemote(), state(), defaultPageSize(), supportedPageSizes(),
supportsCustomPageSizes(), minimumPhysicalPageSize(),
maximumPhysicalPageSize(), supportedResolutions(),
availablePrinterNames(), and defaultPrinterName(). The use of
availablePrinters() is discouraged due to performance concerns.
Task-number: QTBUG-35248
Change-Id: Ic38323a930549ad67bf04a1a6bb43d623dfe6a33
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a new QPA class to abstract Print Devices. Each platform instance
will encapsulate all required details about a print device instead of
the code being distributed throughout the print engine and print
plugin.
Change-Id: I7f6a537ad55a6e7f599d83f461b1e2ee62b15094
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
New QPageLayout to encapsulate page layout details including page size,
orientation and margins. Scale may be added later.
Subsequent changes will use this class in the paged paint devices,
paint engines, print engines, and print plugins to replace multiple
inconsistent local implementations.
[ChangeLog][QtGui] Added class QPageLayout to support handling page
layouts including the page size, orientation and margins.
Change-Id: Ife1ddd6c2a8d1516542be2eb37425111f41cd5c7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
New QPageSize class to encapsulate paper sizes and names to ensure all
sizes and conversions are consistent and match the Postscript standard
sizes.
Subsequent changes will use this class in the paged paint devices,
paint engines, print engines, and print plugins to replace multiple
inconsistent local implementations.
[ChangeLog][QtGui][QPageSize] Added new QPageSize class to implement
Adobe Postscript PPD standard page sizes. This class supports the
standard page sizes, names and keys from the PPD standard, and provides
convenient size and rect conversion methods.
Change-Id: Ie2c8be0c3df0d29ac5da4cd9877ad41d0982633c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add more page metrics tests to expose the many bugs and inconsistencies
in the page layout handling. No platform or pdf backend passes all
these tests so they are skipped for now, but following commits will use
the tests to ensure the re-write of the page layout handling fixes the
many problems in a consistent way for all backends.
Change-Id: Ic5b16aa08dfe2bd9a9191662fd2bbe6b913e15c9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The macro should stringify value of the given token not the token
itself.
Task-number: QTBUG-37547
Change-Id: I90f4fa613bd13d5a581828ab13f620b40dfd3593
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These internal and obsolete hooks are no longer used. The correct way
to provide platform dialogs in Qt 5.x is to implement a platform theme
plugin, as was done for GTK+ 2.x.
Change-Id: I3f1474fbf760130106b3c47173eaedd2f1a919bf
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This simplifies the compiler control semantics by always using the
packaged compiler if it is available. With no packaged compiler, the
service is assumed to be running if the directory structure is present.
Use of a packaged library can be overridden by setting the environment
variable QT_D3DCOMPILER_DISABLE_DLL to 1.
When the runtime compiler is used, the source will no longer be
logged, and the compilation output will no longer be cached.
Change-Id: Ib07f517e7043d7785bdfa9da55abd34df518eeed
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
testcase.prf cannot be loaded from pro file for various reasons,
see qtbase commit history for details.
Moved runtime testdata logic from pro file to testdata.prf, and
thus made is reusable in other test cases as well.
Change-Id: I500d08dc4951e4eda862071e4ddd3e0f6de8c3d2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Seen on Windows:
XPASS : tst_QGraphicsAnchorLayout::stability() QCOMPARE(sameAsPreviousArrangement, true) returned TRUE unexpectedly.
tst_qgraphicsanchorlayout.cpp(1399) : failure location
Move check into loop with descriptive message on fail, do not error
out if it actually passes. This now typically prints:
XFAIL : tst_QGraphicsAnchorLayout::stability() The layout has several solutions, but which solution it picks is not stable ( QRectF(30,0 0x10) != QRectF(30,0 10x10) , iteration 3 , item 4 )
Change-Id: Iae8553dbbcedeb70d5d672e3cefbd1f06a63d27d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The tasks might not have run yet at the time of the QCOMPARE, so we need
to acquire on the semaphore in order to ensure that this is the case,
just like in the previous testcase.
Change-Id: I1da72bb07c2f53760b3bf912fc26aaf10ed18d48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
NormalizationTest.txt does not exist in the project root, but under 'data'
directory. TESTDATA is converted to INSTALLS rules in testcase.prf.
INSTALLS rules generated in testcase.prf does not set 'no_check_exist'
CONFIG variable. Thus qmake will not install NormalizationTest.txt since
it cannot find it from defined location.
Even TESTDATA has been incorrectly defined, NormalizationTest.txt
has been found in majority of the platforms thanks to QFINDTESTDATA
flexibility. However it causes problems on sand-boxed platforms such
as WinRT.
Fixed by defining the relative path to NormalizationTest.txt in TESTDATA
so that qmake can find the file when processing INSTALLS variable.
Change-Id: Id9a28db2a00b17d2c0136e6ff32f421b21137898
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
FreeType engine on QNX has the same weakness as on Windows, so some
tests are expected to fail.
Change-Id: Icd8fcafae425246ca25ad8e029bf8d6fdc7bd250
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Correct the tense of send vs sent in comments and documentation.
Change-Id: I1c5ce9a7b1e49b8b0e8dcfde7d732e4c69acf73a
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Based on file system implementation for WinRT, the UNC paths are not
supported on WinRT, so lets disable corresponding tests as well.
Change-Id: Ib45ae618f39d5da39a822160096599b30204cf71
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Verify that QOpenGLContext works with QWindows that
do not have an explicit size set.
Task-number: QTBUG-35342
Change-Id: I91be7beb0062c5825fc58273c701c396b6423256
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
QMessageAuthenticationCode autotest does not have data folder for
TESTDATA. It seems that pro file is copy/pasted from another one which
actually have data. Removed the unnecessary statement since it caused
problems for https://codereview.qt-project.org/77981.
Change-Id: Ide753e5692bd2f469217760173a9b60f2f646770
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
That's a bug, but this test causes CI problems until it's fixed.
Task-number: QTBUG-35169
Change-Id: I27b3a61437312d2217743670fa14510d9340d8c1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
It is not sufficient that QSharedPointer<ForwardDeclared>'s default ctor
and dtor compile. Copy/move assignment/construction and swapping should work, too.
Arguably, there are more functions that should compile with just a forward-declared
payload, but this is a start.
Change-Id: I75470e3d4ba949c3e735c4078cbc123d53ec3007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qdebug didn't test adding something else after the MyLine object,
so I didn't realize that a space was missing there. All debug operators
should end with maybeSpace(), but with the settings of the caller, so this
requires restoring the settings before calling it. To make it convenient
for all << operators, the destructor of QDebugStateSaver takes care of that.
Change-Id: I18ab78d99d7ee3be951082b5b5d34718ee60e21d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is useful for widget styles to react when widgets are set
read-only, e.g. to update their palette accordingly.
[ChangeLog][QtWidgets] All widgets with a setReadOnly method now
send a ReadOnlyChange event (e.g. for app-specific palette changes)
Change-Id: I74719a3e1b7d034d9bfc94305f846f42aae935bd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Check also for rules set in an environment variable QT_LOGGING_RULES.
This makes it even more convenient to set rules e.g. for just one run of an
application, without having to create a logging configuration file. It
is also more in place with the current way we enable/disable debugging
of parts of Qt via environment variables.
Change-Id: I4d05976f2b6c12bca472552ffa22345475cd01de
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Tomasz Olszak <olszak.tomasz@gmail.com>
Use QStringRef to speed up the parsing of the left side of logging rules.
Change-Id: Idd4d75496e3865d092f2802c45928a414c14c615
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not accept rules with wildcards in the middle.
Change-Id: If6fa71629c46bc4127aa8bd475643bc0e8a9f57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation says that the left side of a logging rule has the syntax
<category>[.<type>]
with optional wildcard '*' as the first or the last character (or at
both positions.
However, so far we didn't allow
qt.*.debug
But what we did allow is implicit dropping of trailing '.', e.g.
qt.* matched also 'qt'
Fix these by splitting up the '.type' in advance, and then do string
matching only on the 'real' category names.
Change-Id: Iab50ad0fc673464e870f5ab8dfb3245d829b3107
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the QTextStream stream operator for formatting 64 bit numbers,
just like we do for other numbers, too. This ensures all numbers in
a QDebug stream e.g. respect the hex and showbase modifiers.
The original reason for formatting qin64, quint64 with QString::number
is unclear (pre-dates the original qt4 git import). Maybe QTextStream
did lack proper support for 64 bit numbers back then.
Task-number: QTBUG-36841
Change-Id: I049516c2a8394c9c1a708f86c3d950418a20a957
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
D-Bus libraries were recently added to OS X 10.7 making these
tests to be executed for first time.
Task-number: QTBUG-37469
Change-Id: Ia7a74a45b18d4a645307f7fb7666236c5e009e5f
Reviewed-by: Simo Fält <simo.falt@digia.com>
Do not close connection in slot bytesWritten() since that can
cause clients to fail with "Connection Closed". Instead, use
deleteLater() to close properly and prevent leaking the sockets.
FAIL! : tst_QNetworkReply::qtbug28035browserDoesNotLoadQtProjectOrgCorrectly() 'waitForFinish(reply) == Success' returned FALSE. ( QUrl( "http://localhost:58240" ) failed: # 2 "Connection closed" )
..\tst_qnetworkreply.cpp(7067) : failure location
Task-number: QTBUG-37449
Change-Id: Ib92cb62fae523370b2fb45e1ccfa217559732bc8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Replacing old troll.no domain with qt-project.org domain. Using troll.no
doesn't work anymore.
Change-Id: Ic6fa71b044d1adbdc66c875b47bfdc256a2afc8e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The test takes too long and fails:
FAIL! : tst_QFtp::abort(WithoutProxy:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithoutProxy:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxy:put_fluke01) 'bytesDone != bytesTotal' returned FALSE. ()
tst_qftp.cpp(1406) : failure location
FAIL! : tst_QFtp::abort(WithSocks5Proxy:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithSocks5Proxy:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:put_fluke01) 'bytesDone != bytesTotal' returned FALSE. ()
tst_qftp.cpp(1406) : failure location
FAIL! : tst_QFtp::abort(WithSocks5ProxyAndSession:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithSocks5ProxyAndSession:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
Totals: 327 passed, 10 failed, 4 skipped
QtQA::App::TestRunner: warning: test duration (398 seconds) is dangerously close to maximum permitted time (450 seconds)
QtQA::App::TestRunner: warning: Either modify the test to reduce its runtime, or use a higher timeout.
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
Change-Id: I122641f174927c6b3668df05c79f88e38b88042f
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Try to fix frequently failing test:
FAIL! : tst_NetworkSelfTest::ftpProxyServer() Failed to receive data in step 32: timeout
tst_networkselftest.cpp(230) : failure location
on Windows. Introduce timeout constant, add message.
Change-Id: I709f0b34cd1cfe5d3c64cf61ccb7907bd616bc54
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This reverts commits f12b0f9a38
("QByteArrayList: optimize op+"),
f96f2fe367 ("Enable QByteArrayList
tests"), and 4f23f0530a ("new
QByteArrayList class").
This class is coming back in Qt 5.4.
[ChangeLog][CHANGELOG FIX] Remove the line about QByteArrayList being
added.
Change-Id: I890ab2b34a9b3e575512eb306d0f241143a867cf
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch adds the Objective-C NSData/CDataRef converters to
QByteArray
This will replace the current converters offered in QMacExtras
[ChangeLog][QtCore][Objective-C] Added NSData/CDataRef converters for
QByteArray
Change-Id: I7a0f14bee4271798db345f3c5efd26ac671a3ea4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Replace SRCDIR define by QFINDTESTDATA
- Replace QVERIFY by QCOMPARE where applicable
- Introduce QVERIFY2 with message for comparisons
Change-Id: Ib5a6b0f09428587281e1b9521e4d8a8117c1afdb
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
The test instantiates enormous amounts of templates in one compilation
unit. All clang versions, that I tested, suffers from performance issues
while compiling the test, the cost depends on the version. The most
affected are shipped by Apple.
Task-number: QTBUG-37237
Change-Id: I0959c1a4a6faee448ae1dae5c1e70ee06cefbd9c
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We do not need to check all possible basic type combinations in
the autoregistration test.
Change-Id: Ibfb97a93d9d1862e669d843988976690bbc83c74
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Redundant and unused variadic macro arguments were removed. For macros
with known count of arguments, named arguments are preferred.
Common code was moved out from macros so it is not generated over and
over.
Change-Id: Ib5106555d0d3c6cadfbdbdbd614831240b6d762f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QFATAL : tst_QGLThreads::textureUploadInThread() Cannot make QOpenGLContext current in a different thread
QFATAL : tst_QGLThreads::painterOnPboInThread() Cannot make QOpenGLContext current in a different thread
Task-number: QTBUG-28264
Change-Id: I281cf0593e01b43456410a9a53746bbb15f34f24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Change-Id: I1711f99f9e46f1d195684e3c3a714b00618dca2e
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
At least if the platform plugin's QPlatformOpenGLContext implementation
supports it.
This completes the QOpenGLFunction changes necessary for dynamic loading
of the OpenGL implementation. Everything else is up to the platform plugin.
Change-Id: I710e6fbee3005360ecf02bc6ef976e1beb513819
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
- QVariant can store (U)Int, (U)LongLong, Float and Double numbers.
Previously, QJsonValue::fromVariant() converted Floats into Strings
while converting the others to Doubles.
- Add unit tests for QJsonValue::fromVariant()
[ChangeLog][QtCore][JSON] QJsonValue::fromVariant() will now convert
single-precision Floats into Doubles instead of Strings
Change-Id: I457adbe29c37ada611d1c6d711c42866d63d4024
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
And takes a very long time to build if it doesn't run out of memory.
Task-number: QTBUG-37237
Change-Id: I8c7fae4d2d99ad59c6d6306da2df554a05955446
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
In the original change - cfb44c6528 - when
querying for the path of a file that did not contain a slash after the
drive indicator it would get the current path and return that as the path
that the file resided on.
However this meant that it would take the current path at that time which
may not be the actual path that was expected. So it was decided that
it should revert back to the original behavior which was to just return
the drive letter followed by the colon which would thus indicate still
that it represented whatever the current path was on that drive.
Change-Id: Ic57ae9227882a66e9a4c4d6537d7f2cae829165a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove the opengl proxy for now. Later it will either be moved into
a separate library or replaced by a QOpenGLFunctions-based approach.
This means that the -opengl dynamic configuration is not usable
for the time being. The rest of the enablers remain in place.
The convenience function QOpenGLFunctions::isES() is now moved to
QOpenGLContext and is changed to check the renderable type. This is
extremely useful since besides supporting dynamic GL it solves also
the problem of GL_ARB_ES2_compatibility (i.e. it triggers the real ES
path when creating an ES-compatible context with a desktop OpenGL
implementation).
Task-number: QTBUG-36483
Task-number: QTBUG-37172
Change-Id: I045be3fc16e9043e1528cf48e6bf0903da4fa7ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
When a child of a widget is spontaneously revealed due to a call to
the parent 'resize' method, the child will not receive a paint event
if it has the WA_StaticContents and WA_OpaquePaintEvent flags set.
This is caused by the backing store being pre-emptively resized by the
call to setGeometry_sys, which causes QWidgetBackingStore::sync to skip
the block which handles the static contents.
There doesn't appear to be any reason to preemptively resize the backing
store, since it is always resized as-needed during the the 'sync' method.
This change-set removes the code which preemptively resizes the backing
store.
Task-number: QTBUG-35282
Change-Id: Ie9942854ca5322dfe0f98ed8100810161576be80
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
MSVC 2008 is confused by TypeInStruct being a template, resulting in
\tst_qatomicinteger.cpp(189) : error C2027: use of undefined type 'QStaticAssertFailure<Test>'
with
[
Test=false
]
for int (and thus for all unsupported types). This appears to be a real
Heisenbug-nature compiler bug as it can also be fixed by adding
qDebug() << Q_ALIGNOF(TypeInStruct<T>)
before the static assert.
Task-number: QTBUG-37195
Change-Id: Ib2b60f3c1ffeb0b8bdeb1fb0c659655ce4ab10d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This causes frequent compiler errors on Windows CE.
tests\auto\corelib\global\qtendian\tst_qtendian.cpp(140) : fatal error C1001: An internal error has occurred in the compiler.
(compiler file 'd:\orcas\compiler\utc\src\P2\main.c[0xCCCCCCCC:0xCCCCCCCC]', line 243)
Task-number: QTBUG-37194
Change-Id: I2adbc1e3b1896fbe86780aa26a15e918333a09f2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
After this change, the relation between copy/move constructor calls in QtGui is
something like 40/16.
A moved-from QPen can only be copied, assigned-to or else destroyed. This required
adding a nullptr check to the copy ctor and the dtor and rewriting copy assignment
(which used non-nullptr-safe qAtomicAssign) in terms of copy construction and
swapping.
Extensive tests included. They are implemented such that they work in C++98 as well
as C++11 mode, but they naturally test move semantics only in a C++11 build.
Change-Id: If68f37c10b8eeefb2478cbae386cd2e38b4f6e19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
by default QT contains both core and gui already
Change-Id: I6f5b551104e40a024468e7cb62e302134e9472ec
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
These tests seem to fail because denormalized numbers are not
supported on QNX yet, so marking them as expected failures.
- floatDistance(denormal)
- floatDistance_double(denormal)
Task-number: QTBUG-37094
Change-Id: I79dbc78da6e9bef8466264fd2cab4af0ee8b868f
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
These tests seem to fail because denormalized numbers are not
supported on QNX yet, so marking them as expected failures.
- testNumbers_2()
- toJsonLargeNumericValues()
- parseNumbers()
Task-number: QTBUG-37066
Change-Id: Ifec95b936fb70253395dee4d1ca18e85870486a3
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
The pseudoclass array is declared with length "NumPseudos - 1",
but the declaration has actually 44 elements, not 45.
This caused a zero-initialized last element to be silently appended
to the array. The zero-initialized element broke the sorting
of the array, which in turn broke std::lower_bound usage
(although of course the problem was there from before switching
to the standard library algorithms).
Task-number: QTBUG-36933
Change-Id: I8a02891fc36761b6ae72d15a0a8d6c6a96813947
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
drawCachedGlyphs draws with the wrong color on RGBA8888. The issue
is that the draw routines bitmapblit_quint32 and alphamapblit_quint32
while safe to use on rgba formats, needs to have the input color
converted.
This patch adds small wrapper functions for bitmapblit and alphamapblit
that converts the formats. Two tests are extended to ensure we have
test coverage.
Change-Id: I5f99f3795eba46a69d4df5b167e6099024e9a060
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This is more consistent with e.g. qt.conf, where section names also
start with an upper case character.
Change-Id: I9ddaf72baeb9334d081807412512242d5d46cbbf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This reverts commit a4ff400e25.
The patch caused a regression for bold fonts which is currently
blocking the alpha of Qt 5.3, so lets revert it and try
resubmitting a fixed version later to avoid delaying any release.
Task-number: QTBUG-36929
Change-Id: I8d474b09b2270eb2f861853e60605429be08e2d9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Output the file name and fix line number to be 1..n.
Change-Id: I3ba7f84b99ce3664bc3e403b230307511b15fe1f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
There is no need to even try to run the tests if the network test
server is not present.
Add a validation in initTestCase() since all test functions depend
on the network test server.
Change-Id: I8eca376a718ab5b6e1cc2c57f2e045dd0b58f52b
Reviewed-by: Richard J. Moore <rich@kde.org>
Unit-test this by making the QList, QVector, QHash and QMap unit tests
be duplicated under strict-iterator mode. There's no test for
QLinkedList.
The tst_Collections test does not compile under strict-iterator
mode. It generated over 15000 errors when I tried.
The strict iterators required a small change: the difference_type
typedef needs to match the operators that get distances
(operator-(iterator)) and move the iterator around (+, -, +=, -=, etc.).
Task-number: QTBUG-29608
Change-Id: I834873934c51d0f139a994cd395818da4ec997e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Add a new QMarginsF class to complement QMargins in the style of
QSize/QSizeF and QRect/QRectF.
[ChangeLog][QtCore] Added class QMarginsF to support handling margins
with floating-point values.
Change-Id: Iaaa95ec85f5d126d9d864fc4b607241a8c8a8f3a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On Windows, trailing spaces in a filename are silently ignored, so we
need to strip it before trying to open a file with it. Otherwise it ends
up being stripped later and in a case like " ." it will end up causing
Qt to think that a folder exists when it does not.
[ChangeLog][Platform Specific Changes][Windows][QtWidgets][QFileDialog]
Handled the case of having trailing spaces in a filename correctly so if
the filename ends up being empty that the parent path is used instead.
Change-Id: I6500cc3a44746bf4a65e73bcfb63265a0a97c8a3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So far we did bind the definition of Q_COMPILER_VARIADIC_MACROS to
C++11 (so gcc, clang will not define it in default gnu++98 standard).
However, variadic macros are a feature of the gcc preprocessor since
version 2.97, and are enabled in the default configurations on gcc, clang,
icc.
This might cause warnings and errors though if one enables additional
warnings in gcc, clang (e.g. by -pedantic). Anyhow, as a precedent
qglobal.h already relies on 'long long' ... The warning can be disabled
by adding '-Wno-variadic-macros'.
[ChangeLog][Compiler Specific Changes] Variadic macros are now enabled
more liberally for gcc, clang, icc. If you have warnings (because you e.g.
compile with -pedantic), disable them by -Wno-variadic-macros.
Change-Id: Ie979b85809508ad70cab75e6981f20496429f463
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit f4dd534 introduced a regression, so that QFontMetrics reported
a wrong size (to be more specific width) for FreeType fonts.
The calculation of glyph advances has to to reflect (rounded)
integral number of pixels. This was only done when the glyph was cached.
So in some cases the first call to QFontMetrics::size gave a different
result than the second.
This patch reverts f4dd5344fb.
The tst_QFontMetrics::same auto test only happened to work on some
platforms, on BlackBerry for instance it did not. Extended the test
case to make sure it works for different font sizes.
Change-Id: Ia5bb9abd3ff98193c9bba048b85207672ed8d9c3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
This partially reverts 5764f5e6ea and
fixes the problem differently.
After this commit, "file:///foo" is still equal to "file:/foo", but
"foo:///foo" becomes different from "foo:/foo", as it should be.
Task-number: QTBUG-36151
Change-Id: Ia38638b0f30a7dcf110aa89aa427254c007fc107
Reviewed-by: David Faure <david.faure@kdab.com>
This fixes the issue that the blitter required sometimes the
texture wrapping to be repeat
Change-Id: I86150d008422facf9040873b0983b0e44be9ad24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The Origin for Target rect was deemed a confusing concept. The current
implementation would translate the target rect to the coordinate system
specified. However, the order and "direction" of the vertices would
always be the same. So drawing a texture in for one target rect defined in
one coordinate system would paint the texture the same way as it would
when a texture was drawn for a target rect drawn in the "opposite"
coordinate system. The point with this was that if you wanted to "flip"
the texture you would specify that with the source coordinate system.
However, this approach breaks on different levels, such as QRect has functions
which expects a top left coordinate system (ie. top() and bottom()).
In the end Qt uses a top left coordinate system, hence QWindow specifies
a top left coordinate system, and hence the api becomes easier if it is
not possible to define the coordinate system of the target viewport.
Change-Id: I7dd59b3718380876e87a4bff88381d7a1c7d58c1
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This also has the advantage of not requiring the use of the locale
codec. Quite an advantage if you're debugging the locale codec. But it's
mostly so that we don't get question marks that hide the difference we
were trying to locate.
[ChangeLog][QtTest] QtTest now prints an escaped version of QStrings
that failed to compare with QCOMPARE. That is, instead of converting
non-printable characters to question marks, QtTest will print the
Unicode representation of the character in question.
Change-Id: I44c1ef3246b188c913dacd3ca4df02581356ea41
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is extremely useful, since the most common action after a failed
compare-and-swap is to loop around, trying again with the current
value as found in memory.
Code currently written as:
do {
Type value = atomic.load();
...
} while (!atomic.testAndSetRelaxed(value, desired));
Becomes:
Type value = atomic.load();
do {
...
} while (!atomic.testAndSetRelaxed(value, desired, value));
In most CPU architectures, the value that was found in memory is known
to the compare-and-swap code, so this is more efficient than the
previous code. In architectures where the value is not known, the new
code is no worse than before.
The implementation sometimes modified an existing function, sometimes
it added a new one, depending on whether more registers were needed in
the assembly (like ARMv6-7), the code became more complex (ARMv5), the
optimizer failed (C++11), or it was just plain equivalent (MIPS).
Change-Id: I7d6d200ea9746ec8978a0c1e1969dbc3580b9285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This implementation is based on GCC's implementation of std::hash<FP>, but only
to the extent of checking for zero before hashing the bits. The bit hasher is
the Qt one; I didn't even look what GCC uses.
The check against 0.0 is mandated by the requirement to have
\forall x,y: x == y => qHash(x) == qHash(y)
which would be violated for x = 0.0 and y = -0.0 if we only hashed the bits.
Implemented out-of-line to avoid potential FP-comparison warnings, as well
as to be able to use the file-static hash() functions, which gets inlined
unlike qHashBits(), which cannot be.
[ChangeLog][QtCore][QHash/QSet] Allowed to use float, double and long double
as QHash/QSet keys.
Change-Id: I38cec4afb860f17e9f8be7b67544e58b330f8fff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
