This reverts commit 9e476b798f.
Reason for revert: Angry Vulkan bots
Original change's description:
> Refactored SPIR-V RelaxedPrecision handling
>
> The RelaxedPrecision decoration is now handled by nextId(), to make it
> easier to see all spots where a RelaxedPrecision decoration might be
> necessary. The goal of this initial refactor is not to actually fix the
> issues with RelaxedPrecision decorations, but rather to lay the
> groundwork for doing so in followup CLs.
>
> The initial intent of this change was to not affect the SPIR-V at all,
> saving modifications for followups, but there ended up being three kinds
> of changes to the output:
>
> 1. Doing things at nextId() time rather than later means some
> decorations move to an earlier spot in the output. This results in
> diffs, but should not cause any behavioral changes.
> 2. We were incorrectly tagging bools as RelaxedPrecision in some
> situations. By funneling things through fewer code paths, the refactor
> would have caused this to happen in even more situations, and the code
> responsible for the bug was being rewritten in this CL anyway, so it
> seemed worth just fixing the issue as part of this change.
> 3. Funneling things through fewer code paths ended up adding
> (correct) RelaxedPrecision modifiers to binary operations that had
> previously been missing them. It seemed better to just let it happen
> than to try to maintain bug-for-bug compatibility with the previous
> approach.
>
> Change-Id: Ia9654d6b5754e2c797e02226660cb618c9189b36
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384318
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I9ada728e5fd5798bc1179640560c2e6045b7efd1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/385158
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
The RelaxedPrecision decoration is now handled by nextId(), to make it
easier to see all spots where a RelaxedPrecision decoration might be
necessary. The goal of this initial refactor is not to actually fix the
issues with RelaxedPrecision decorations, but rather to lay the
groundwork for doing so in followup CLs.
The initial intent of this change was to not affect the SPIR-V at all,
saving modifications for followups, but there ended up being three kinds
of changes to the output:
1. Doing things at nextId() time rather than later means some
decorations move to an earlier spot in the output. This results in
diffs, but should not cause any behavioral changes.
2. We were incorrectly tagging bools as RelaxedPrecision in some
situations. By funneling things through fewer code paths, the refactor
would have caused this to happen in even more situations, and the code
responsible for the bug was being rewritten in this CL anyway, so it
seemed worth just fixing the issue as part of this change.
3. Funneling things through fewer code paths ended up adding
(correct) RelaxedPrecision modifiers to binary operations that had
previously been missing them. It seemed better to just let it happen
than to try to maintain bug-for-bug compatibility with the previous
approach.
Change-Id: Ia9654d6b5754e2c797e02226660cb618c9189b36
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384318
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This drastically reduces the number of functions which we allow to be
inlined. If this change does not hurt our performance, it will allow us
to trivially remove hundreds of LOC. All current data leads us to
believe that it may affect the Mali 400 but is highly unlikely to change
results on any other device in the tree.
More info: http://go/optimization-in-sksl-inliner
Change-Id: Ia6b706742ce5407453e0e697b6c1f9201084c0e8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384858
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Prevents us from accepting code that can't be correctly transformed to
GLSL, like:
uniform float x;
float y = x;
(Previously, writing code like that in a runtime effect would
effectively produce the exact same code all the way through to GLSL, and
the driver would fail to compile it).
Bug: skia:11336
Change-Id: Iaa797587c4a4a7289ed59ce2736cf0bf0fc5bca3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384698
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:11716
Change-Id: Ic09071544b5b5216b01fbc9b478b6269dd96202f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382280
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This only affects fragmentProcessors (children) - and the backend SkSL
we're emitting should not contain those. We've just been silently
ignoring those declarations when converting to GLSL, MSL, etc.
Change-Id: I241f2f4fe4614b49ebccc9c2976fd408e94656d0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384316
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This reverts commit a04692f69e.
Reason for revert: Angry Vulkan bots.
Original change's description:
> Fixed a number of spots where we should have been using RelaxedPrecision
>
> Our SPIR-V output was missing many RelaxedPrecision decorations, which
> was presumably impacting performance.
>
> Change-Id: Iee32d4a42f37af167fe0e45f3db94c2142129695
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384178
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
TBR=egdaniel@google.com,brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: If4fe945cb363c9b61b5a4abfde649a437689d2eb
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384217
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
I ran into an issue in an upcoming CL which generated a particularly
ugly switch statement:
switch (x) {
default:
discard;}
So I cleaned this up, and while resolving this issue, managed to improve
a bunch of existing codegen as well. The formatting change has been
split out to a separate CL since it impacts so many golden outputs.
Change-Id: I7a6be29903c47560dcc7f6acd3ef15fd0c5c3c50
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384179
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Our SPIR-V output was missing many RelaxedPrecision decorations, which
was presumably impacting performance.
Change-Id: Iee32d4a42f37af167fe0e45f3db94c2142129695
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/384178
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Bug: skia:11738
Change-Id: I1dd5e99830f70d72c292379a45c4e39a55588858
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/383706
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
We no longer derive a performance benefit from this pass in practice,
and it is a very expensive compilation step. It is also prone to fuzz-
related errors.
Doc: http://go/optimization-in-sksl
Change-Id: Ief08ffac659a8fe7fe92c92b9a5da14c9f713bc2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/381261
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
As you might expect, a function tagged with `noinline` will never be
considered as a candidate for inlining.
Change-Id: Ia098f8974e6de251d78bb2a76cd71db8a86bc19c
Bug: skia:11362
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382337
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Currently, only one of three uses (local variables) does this correctly.
Bug: skia:11716
Change-Id: Iad11e8e5998fcc7caee4d438e0558c5d4e2b1821
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/382277
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: Ic2d1240ab785101365b0fd934562505fb5a3e599
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/381816
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Expressions like `value == value` or `color.a != color.a` can be
replaced by `true` or `false` on sight. The GLSL spec makes it clear
that checking for NaN is optional:
4.7.1 Range and Precision
"... NaNs are not required to be generated. Support for signaling NaNs
is not required and exceptions are never raised. Operations and built-in
functions that operate on a NaN are not required to return a NaN as the
result."
Change-Id: I2ad9f2dc505b638ea2904bef41b7a79a2b329551
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/381262
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This CL will be used to test for potential performance regressions (or
improvements) that we might cause by disabling this optimization pass.
It will be reverted in ~1 day.
Change-Id: I26b7687c341eb6d81231406381c39869cfccf6d6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/381259
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Change-Id: I7a7874e58bf53978afce8a41b26092406b6490ed
Bug: skia:11342
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380360
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Expressions like `x * 1`, `x *= 1`, `x + 0`, `x * 0`, or `0 / x` don't
actually do anything, and can be simplified to just `x` or `0`. (The
zero case must also check that `x` doesn't have side effects, because
`0 * myFunction()` still needs to call `myFunction`.)
`0 - x` is also detected and rewritten as `-x`.
`0 / 0` is left as-is.
This logic works for scalars and vectors; matrices are left as-is.
A similar optimization also occurs in the constant-propagation pass, so
we see almost no diffs in the tests. If control-flow analysis is turned
off, we do see some improvements. (I didn't reuse the existing code at
all, since it was designed around rewriting the CFG tree, but the
concept was identical.)
Change-Id: Ia99cd81f1d4cd3dafaa43ccac6a2261e3257a185
Bug: skia:11343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/380356
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This enables the ternary to be optimized away in code like:
const bool SHINY = true;
color = SHINY ? add_shine(x) : x; // to --> `color = add_shine(x);`
Without constant propagation.
Also, I added a unit test for ternary expression simplification; I
wasn't able to find an existing one.
When the optimization flag is disabled, this CL actually removes the
optimization of `true ? x : y` --> `x` entirely; previously, this
substitution would be made regardless of optimization settings.
Change-Id: I93a8b9d4027902d35f8a19cfd6417170b209d056
Bug: skia:11343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379297
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Swizzle optimizations now occur at IR generation time. These
optimizations are redundant with the control-flow optimization phase so
they are mostly not visible in our test output, but they do affect DSL
test results. Interestingly, they do improve our test output slightly
as well, for various reasons (e.g. we do not fully optimize lvalues in
the control-flow pass).
Change-Id: I6ebe6d71a5c22d9823b5fa500e43078915cbfb45
Bug: skia:11343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372257
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This check now runs at function finalization time, before constant
propagation has occurred; this affected the "DeadIfStatement" test.
Our detection isn't smart enough to realize that a loop will run zero
times, so it treats `for` and `while` loops as always running at least
once. This isn't strictly correct, but it actually mirrors how the CFG
implementation works anyway. The only downside is that we would not flag
code like `for (i=0; i<0; ++i) { return x; }` as an error.
Change-Id: I5e43a6ee3a3993045559f0fb0646d36112543a94
Bug: skia:11377
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379056
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This should be legal, and we support this, but some versions of Android
do not: http://screen/3bkQewHF3xUMn5v There's no point in allowing
these shaders to exist; they can't compile on real-world clients, and
these vardecls are borderline meaningless (as the variables being
declared aren't reachable by any other statements).
Change-Id: Ie1351933c90caee9124eeab8983364ec030b2653
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379584
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit 50b1b2b90d.
Reason for revert: ending experiment
Original change's description:
> Disable control-flow analysis in SkSL. (Performance experiment)
>
> This CL will be used to test for potential performance regressions (or
> improvements?) that we might incur by disabling this optimization pass.
>
> It will be reverted in ~1 day.
>
> Change-Id: I775cdb0c95df81fa25ebbd66e4ff01f64c660f68
> Bug: skia:11319
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/378456
> Commit-Queue: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
> Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: Ie385a82db237ff5651348d82b9651f8ba09375b9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379581
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Covers some common geometry processors, texture effect, etc.
This also rearranges how fp keys are arranged in the overall key. We no
longer include the key size as part of the key - this made no sense.
Instead, we explicitly include the number of children. We also put all
data for one fp before any children, so the tree can be reconstructed
more-or-less top-down.
Finally, added an "addBool" helper that reads nicer than addBits(1)
everywhere.
Bug: skia:11372
Change-Id: I4e35257fb5923d88fe6d7522109a0b3f4c4017d4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379059
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This CL will be used to test for potential performance regressions (or
improvements?) that we might incur by disabling this optimization pass.
It will be reverted in ~1 day.
Change-Id: I775cdb0c95df81fa25ebbd66e4ff01f64c660f68
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/378456
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
This reverts commit e4da7b672f.
Reason for revert: breaks SkSLBench perf test
Original change's description:
> Migrate if-statement simplifyStatement logic to IfStatement::Make.
>
> This performs essentially the same simplifications as before, just at
> a different phase of compilation.
>
> Change-Id: Ia88df6857d4089962505cd1281798fda74fd0b02
> Bug: skia:11343, skia:11319
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376177
> Commit-Queue: John Stiles <johnstiles@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: I0051188ffe69426904066eb60a932435efdc2af8
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11343
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/379062
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
All layout(key) fields include the field name meta-data, and use as few
bits as possible.
Bug: skia:11372
Change-Id: Ie12b3e0d01148457e5ea078cbf7d0a4bff35302e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/378596
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This performs essentially the same simplifications as before, just at
a different phase of compilation.
Change-Id: Ia88df6857d4089962505cd1281798fda74fd0b02
Bug: skia:11343, skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376177
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Rather than have the inliner own this responsibility, the function
finalizer now detects if a function is supposed to return a value but
never actually does. This will allow us to detect this error case even
if the inliner is disabled. The inliner should no longer encounter
functions that claim to return a value but don't, so it will now assert
if one is encountered. (The inliner still has the logic to handle this
case gracefully, just in case.)
The check is currently very simple and doesn't analyze the structure of
the function, so it won't report cases where some paths return a value
and others don't, e.g. this will pass the test:
int func() { if (something()) return 123; }
(This is good enough to resolve the inliner issue, though, as it only
occurred in functions with no value-returns at all.)
Change-Id: I21f13daffe66c8f2e72932b320ee268ba9207bfa
Bug: oss-fuzz:31469, oss-fuzz:31525, skia:11377
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/377196
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Bug: skia:11356
Change-Id: I16322e6396dc7e7c8c50ba1d39e07311cf3bd346
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376116
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Interestingly, this improves our codegen even with the optimizer fully
enabled, as apparently statement chains like:
`x = true; x = x; x = x;`
were getting transformed by constant-propagation into:
`x = true; x = true; x = true;`
making them no longer candidates for self-assignment elimination.
Change-Id: I6d94a809e94b01a00fd92459fcbce898b3cbbb11
Bug: skia:11343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/377100
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
In http://review.skia.org/375776, an optimization was added to the
Inliner, causing it to skip generation of unnecessary temporary
variables. The fuzzer immediately discovered a flaw in this logic: the
"unnecessary" variable was actually used in the rare case that a
function failed to actually return a value. The inliner didn't detect
this case. Of course, this isn't a valid program either, so now we
report the error and cleanly fail.
Change-Id: I1f201cfd33f45cace3be93765a4e214e43a46e69
Bug: oss-fuzz:31469, oss-fuzz:31525
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/377101
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Surprisingly, this actually improved our error detection slightly.
The expression `- -half4(0)` can now be simplified to `half4(0)` at
IR generation time, which allows the constant-folder to detect a
constant zero (and from there, a division by constant zero).
Change-Id: I8c4f6ab522efab5bf98913f9c6a1487b7af39a99
Bug: skia:11342, skia:11343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376842
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
For now, just use this to prevent *any* layout qualifiers from appearing
on functions, or their parameters.
Bug: skia:11301
Change-Id: I05d8118c7121048c6ef49695a54e3714a8f8687e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376796
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This adds Analysis::IsConstantExpression, to determine if an expression
is a constant-expression. It now expands to cover 'const' local and
global variables, because we also enforce that the initializer on those
variables is - in turn - a constant expression.
This fixes 10837 - previously you could initialize a const variable with
a non-constant expression, and we'd emit GLSL that contained that same
pattern, which would fail to compile at the driver level. That should
not be possible any longer.
Bug: skia:10679
Bug: skia:10837
Change-Id: I517820ef4da57fff45768c0b04c55aebc18d3272
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/375856
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The expression `~123` was making a PrefixExpression of type $intLiteral.
It should be converted to type `int` when the ~ prefix is applied.
This change also changes the output from oss-fuzz:27614. Both programs
are essentially nonsense expressions with no real behavior, so this is
fine.
Change-Id: I586be149ce95136fabee72fdd3473814d54948cf
Bug: oss-fuzz:31410
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/376620
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
These variables were later being eliminated by the dead-code-elimination
pass, so you can't see them directly in the final output, but removing
them affects the name mangling off all future symbols, so it causes an
enormous ripple effect in the diff. And of course, it's a waste of time
and memory to synthesize IRNodes just to destroy them later.
If we disable control-flow analysis, we lose the dead-code-elimination
pass entirely; this change is also beneficial for emitting better code
when optimizations are turned off.
Change-Id: I882b3be4f3fd99b77d99b6abe128f26bb9252c89
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/375776
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Change-Id: Iafeb13812851271a5262730e9c0642d4469c273f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/375020
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Now, even if a qualifier has a default value, we will know that it
appeared in the text. We can use that to check for redundant qualifiers
(as is being done here), and in the IR generator to prevent any use of
certain qualifiers, depending on context. (eg, runtime effects, wrong
shader stage, on a parameter declaration, etc.)
Bug: skia:11301
Change-Id: I2cd6ad35c2b4c4d6f87ade97e80aea84dc16ee4b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/374616
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Bug: skia:10837
Change-Id: I33da2eb1e723ed04ab62d65c21e54306dd362bed
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372677
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Rename factory function from createGLSLInstance() to makeProgramImpl()
Bug: b/180759848
Bug: skia:11358
Change-Id: I095bdf1f26db5a8192fa8ab59000db4a1d561d96
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/373738
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
The test inputs were removed at http://review.skia.org/360778
Change-Id: Ib2918f3f984cd80463bacb822ef510ee9feb1e77
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/373916
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This splits switch() construction into two stages.
- One version of Make takes an array of case-values and case-statement
lists, and is responsible for reporting errors if the case-values are
not unique or are improperly typed. This is what the IR generator or DSL
will start with on its first encounter with the switch statement.
- The other version of Make takes an array of already-processed
SwitchCases and can assume the invariant that they're all correctly-
typed with unique values. This is what we will have when a statement
is inlined or otherwise cloned. (We still assert this invariant, for
correctness' sake, but in release mode we assume it.)
This CL doesn't perform any optimizations at Make time yet; it does work
equivalent to how `switch` works in the IR generator today. It does
improve duplicate case-label checking slightly; duplicate case labels
are now reported, and duplicate `default:` labels are detected.
(Multiple `default` labels won't pass the parser, but they can be
constructed in DSL.)
Change-Id: I537ce2c8236152d58641fb1793619d66a62c01a8
Bug: skia:11342
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372616
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
These were unused - we always enable the advanced blend equation
extension using "blend_support_all_equations" (if enabling the
extension is required at all).
Change-Id: I95fd6483ec54dfaf983290de95629fe0e86c22e8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/373877
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Constant propagation might be going away, but static-switches are likely
here to stay. Avoid conflating the two in this test.
Change-Id: If4b6c99c85f124d3bbc20da858693f09f5e4fd59
Bug: skia:11319
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/374117
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The optimizer now properly recognizes all types of exits from a switch
statement. Break, continue and return are all potential exits and need
to be considered when determining the exit path from the switch.
Previously, dead code elimination was hiding the effects of this bug
from us, but it meant that an optimized switch had the potential to
generate lots of worthless IR nodes which then needed to be detected and
eliminated by the CFG. In particular, this affected the enum form of
blend, causing a catastrophic amount of extra work to be done.
Change-Id: If857e38cadfc016884624ea4db25a273ad3dce5b
Bug: skia:11352
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372958
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Change-Id: I672345116e3b5538c0f7e8c5f2f74aa56bb81e6d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372676
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
When we detect a static switch, the optimizer finds the matching switch-
case and eliminates all the other switch-cases. It handles case
fall-through by scanning forward and looking for an unconditional break.
However, the inliner has an interesting quirk--it can replace `return`
statements inside of a switch with `continue` statements, since the body
of the inlined function has been wrapped with a for-loop to allow for
early exits. The optimizer does not recognize these continue statements
as exits from the switch (although they certainly qualify), so it
treats continues as fallen-through and keeps emitting switch-cases.
The dead-code elimination pass was actually doing us a favor here and
eliminating the excess code later. A flag was added to disable DCE in
order to reveal the problem in a test.
Change-Id: I8ff19fde5e32d0ab73d7c5411da40cb953a446f5
Bug: skia:11352
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372956
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
There are two forms. Swizzle::Make supports components XYZW only;
Swizzle::MakeWith01 also supports the 01 components, and restructures
the zeros and ones into a constructor (as IRGenerator::convertSwizzle
has historically done). This means that once we are past the initial
IR generation stage, and we know that the 01 components have been
eliminated, we can avoid the extra 01-handling logic and just call
Swizzle::Make directly. This isn't a huge deal but it means that call
sites like the inliner can avoid some extra work that will never happen.
Change-Id: I46690c3d6b07feb6327ee72e8f66f15592a35554
Bug: skia:11342
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371398
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Surprisingly, this error is actually caught by our parser, which
interprets the default label in a unique way. From the parser comments:
"Requiring default: to be last (in defiance of C and GLSL) was a
deliberate decision. Other parts of the compiler may rely upon this
assumption."
The comment is true--we don't check for duplicate default switch-case
labels anywhere else in the code, just here in the parser.
We rely on this, so we should have a test for it.
Change-Id: I6df5c565aca4d4b8565b96638dce9504efc39ccc
Bug: skia:11340
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372617
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Change-Id: I4df18946cdb3d9f1f7833461f913f2df94696821
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372197
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
These were all unused, and only implemented on one backend.
Change-Id: Ibd2fcef1a971e6c1bd9da0784c5d852a60708484
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372117
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Change-Id: I885149c73be63c223ac88a697ffe046a7f8384d0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/372116
Reviewed-by: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:11335
Change-Id: I88c952cbfe2d2c5920e17675da1674928f37b982
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371480
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:11295
Change-Id: Iec11f3f4d26eb5b1c07707b3cedd09096bad80d0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371478
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
When coercing a type, we would previously call checkValid() so we could
detect function-references and type-references, so we could get a nicer
error message.
It turns out that we can just do the "is this a type-reference/
function-reference?" check directly inside coerce() and get the same
improved error messages. Since we should be coercing all our values to
the right type, and type/function-references aren't coercible to
anything, this should catch them all. I don't expect any of these
to survive all the way to the end of IR generation.
(In case one of these types does slip through, I've left the error case
in checkValid, but I've also put in an assertion. If the fuzzer can
make that assertion fire, we are probably missing a call to coerce()
somewhere.)
This cleanup is meant to help migrate coerce() out of IRGenerator.
Change-Id: I031809adf439b1766048768b782c57e7f2494006
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371479
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Adds trivial name mangling to the .stage output, so we can verify that
it's working in all places (declarations, references, etc). Also added
another global variable whose initializer is - in turn - another global.
Bug: skia:11295
Change-Id: Ic220bfae0a6d1eeeba66ade30d3d781af15c5dea
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371477
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Includes variables with and without initializers. Note that both the
.skvm and .stage output is incorrect right now. (No declarations for
global variables in .stage, and the initializer is dropped in .skvm).
Bug: skia:11295
Change-Id: Icb6d797616be6a1bc7cbdc9db4fefa7e30c65656
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/371143
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
None of these are legal in GLSL ES 1.0. Added a new test that previously
compiled without error. Started out with just assignment and equality,
then realized that sequence and ternary should be blocked, too.
Bug: skia:11323
Change-Id: I02691f819565afabeadbb12cab6c07acf40093f7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/370880
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
When SPIR-V generates function calls to an intrinsic, it assumes that
it can get a pointer to out-parameters referenced by the intrinsic.
This does not account for swizzled out-parameters; these are valid
lvalues, but do not work with getPointer().
The two intrinsics supported by SkSL which have an out-parameter are
frexp and modf, so these tests were fleshed out to trigger the error.
Neither of these are supported in ES2, though, so we cannot test them
via Runtime Effects.
Change-Id: Ib92707a28ba6d1c282d20e29a2a387bddf74ad23
Bug: skia:11052
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/370116
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
The out-param helpers emitted by the Metal code gen (intended to provide
GLSL out-parameter semantics in Metal) emitted bad code if passed the
same variable for two separate out parameters. It would previously
create two parameters in the helper with the same name. The helper
function now omits the name of the second variable in the parameter list
if it is redundant; we already know the caller is passing the same
variable twice.
Change-Id: Ibdc6c02a9e9e4bdb4f4546a25068f2018aa07b10
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/370258
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
GLSL ES2 documentation on out parameters: "Evaluation of an out
parameter results in an l-value that is used to copy out a value when
the function returns."
The inliner does not do any alias checking when inlining an `out` param.
That is, passing the same variable to two separate `out` parameters
would not generate two distinct lvalues in the inlined code; it reuses
the same variable for each out-params in the inlined code.
(Amusingly, our CFG can fully optimize away this test code so it just
returns "red".)
Change-Id: Ib781d2cfdac54f01b6abe159af0c84ff24ff6976
Bug: skia:11326
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/370256
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Multi-dimensional arrays aren't legal in GLSL/SkSL, so this should be
caught and flagged as an error. The parser now verifies that a
variable's type isn't an array-type before accepting a `[` token to
open an array on the variable name.
This CL also refactors the IR generator's `convertArraySize` method to
make sure that various checks are made for all callers. Originally this
restructuring was used to verify array multi-dimensionality, but that
didn't detect errors inside struct declarations (which get no error
checking inside the IR generator) so the IR generator updates no longer
need to check the array dimensions.
Bug: skia:11322
Change-Id: Id33f4bdfb544019ddf995a8196c3c09cfe5a4525
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/369916
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
We now interpret any statement of the form `Type identifier...` as a
var-declaration and report errors as such. Previously, if a var-decl
statement generated an error during parse, we'd report errors as if it
were an expression-statement, which meant that slightly-invalid code
could return out-of-context, misleading errors.
Bug: skia:11287
Change-Id: I2c6cf2984760eb34593c80cb30f8c4e007d42027
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/370036
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Bug: skia:11314
Change-Id: I66476543462ae378a5bfb6cbd902dfa2f5fc45f5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/369917
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
The CL at http://review.skia.org/366399 introduced a bug with
LValue::getPointer. Specifically, getPointer used to return zero when
no pointer is available. (This happens when the LValue is a swizzle.)
That CL changed the error code to -1. However, it did not fix up all
the call sites that checked the return value of getPointer().
This CL fixes up those call sites to use -1 consistently, and adds
TODOs in spots which do not check the result from getPointer() at all
(instead assuming it cannot fail). This will allow swizzled out-
parameters to work in SPIR-V as they did before. (Except in intrinsics,
where they seem to have been broken all along, but those are now marked
with a TODO at least.)
Note that we still do not fully emulate GLSL semantics for out
parameters, as out-parameters should only be copied back to the original
variable at the end of the function call to be fully GLSL compliant.
(This CL also replaces a tuple with a named struct for readability.)
Change-Id: I708dc7a69296a4244ba9ceb85c3e68d1f331bbc9
Bug: skia:11052
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368618
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Uses the pipeline-stage callback mechanism. It mangles the type name
(with a test to verify that this works), and then calls defineStruct
with the entire SkSL struct definition string.
Bug: skia:10939
Change-Id: If14cf1b11faaa80ad8d4086cdacf68532bac43fc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368809
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
This was being set to zero instead of one by mistake. Interestingly,
this was undetected by the CPU backend, but appears to matter sometimes
on the GPU side.
Change-Id: If827863f69c140f933696c6ff55c8a7095620c29
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368858
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This is just like mul(F32,F32) but optimizes 0*x == 0.
Use it in SkSLVMGenerator; sksl already applies this optimization.
PS2 has a sneaky version using % as a fast_mul() operator, and
PS3 has a sneakier version using ** instead.
We could of course write this all out using fast_mul() the long way,
but I found that quickly became difficult to read.
Change-Id: Iae35ce54411abc00e7729e178eb6a10f151a5304
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368838
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Fixes another instance of anglebug.com/2098 with advanced blend
functions.
Change-Id: I91863723d8b4c33ab2f5a527fe0374e8947bba16
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368813
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Disabled on Adreno 5xx/6xx as the tests do not pass on those GPUs:
http://screen/3Dkgs9syj37cjBV
Change-Id: Ib935d01e8f06dbfe7decd5cc4e52e0688b48be08
Bug: skia:11306, skia:11308
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368805
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit 4908a24d4b.
Reason for revert: test fails on Adreno 5xx/6xx, will land tests
separately and disable on Adreno
Original change's description:
> Revert "Add support for matrix == and != in Metal shaders."
>
> This reverts commit c501857188.
>
> Reason for revert: breaking many bots
>
> Original change's description:
> > Add support for matrix == and != in Metal shaders.
> >
> > We need to polyfill an operator== and != when these are first
> > encountered in the code.
> >
> > Change-Id: I539c838ee1871bcb0c4b66abb8a4a0f91146cd4f
> > Bug: skia:11306
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368496
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
>
> TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
>
> Change-Id: Id583109a0d167c2c58a57644b14cd5f49d670737
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:11306
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368801
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Bug: skia:11306
Change-Id: If7c628b8c7a2ce40d6c88599a7660ff91c4ac67a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368804
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
"Constant" is an address space qualifier and can't be applied to a
local variable. "Const" in GLSL (and hypothetically SkSL) is meant to
apply to a constant expression regardless of address space.
Our previous test was not finding any error because the optimizer was
eliminating the constant expressions entirely.
Change-Id: I6cfe8e2a621c79945b33e0166780d81e79890a1b
Bug: skia:11304
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368517
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This reverts commit c501857188.
Reason for revert: breaking many bots
Original change's description:
> Add support for matrix == and != in Metal shaders.
>
> We need to polyfill an operator== and != when these are first
> encountered in the code.
>
> Change-Id: I539c838ee1871bcb0c4b66abb8a4a0f91146cd4f
> Bug: skia:11306
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368496
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: Id583109a0d167c2c58a57644b14cd5f49d670737
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:11306
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368801
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
We need to polyfill an operator== and != when these are first
encountered in the code.
Change-Id: I539c838ee1871bcb0c4b66abb8a4a0f91146cd4f
Bug: skia:11306
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368496
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This emits SkSL that is more-or-less what the compiler re-ingests when a
runtime effect is used to create a GrFragmentProcessor.
Change-Id: I0926be44fc4493e722a5edc18198e161e4192cde
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367883
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: John Stiles <johnstiles@google.com>
Currently, SkSL is able to constant-propagate `x = x + constant` into
`x = constant` when the starting value of x is known. However, it is not
able to do the same optimization for `x += constant`. This test
demonstrates that once += is encountered, we lose track of x's value and
can no longer propagate its value.
(This is equally true of all the op-assignment operators, += -=
*= /= etc.)
Change-Id: I3523e96baf9a73982cf3b09f0d23b95adacf106b
Bug: skia:11192
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/368248
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The leftover tests in shared/ are not easily testable as Runtime
Effects; they do things that ES2 doesn't support or use a feature not
exposed directly by Runtime Effects.
Change-Id: I7ebe170cf713c4a0d2dbef333c1fcbac2410c67f
Bug: skia:11009
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367059
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
These cover new ground; when combined with some additional optimization
work, they can cause crashes in the optimizer that we don't see from any
existing test.
Change-Id: I3958a5522cfe0929d0753e6e617d72e032c7f5a3
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/367063
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
SkSL.
It would previously catch 1 / 0, but fail to detect x / 0.
Bug: skia:11051
Change-Id: I3adb5942cce03a7ad40a13a8ca5d5a7f2029d6ad
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366720
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: Ethan Nicholas <ethannicholas@google.com>
This takes away one of our gadgets for thwarting dead-code elimination
in unit tests, but it's the right thing to do. Comma expression left-
sides without side effects are clearly dead code.
Change-Id: Iaee490b4a742d06a0a0be94cddaa69a51543d8f5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366719
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This fixes the OutParamsTricky test.
Change-Id: If59637bc946b71b141ae1d90cf1652bf80b163c4
Bug: skia:11269
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366399
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
- MultipleAssignments
- NegatedVectorLiteral
- NumberCasts
- OutParams
- OutParamsTricky (disabled on GPU due to skia:11269)
Change-Id: I87dc9c5019931f3d2dc3aafbe1e02d0eee2e1a05
Bug: skia:11009, skia:11269
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366400
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is enforced by ANGLE in Strict ES2 mode; we need to enforce it as
well.
Change-Id: I6e2f547ad8e0ce817742cf84659764cf6bce38b9
Bug: skia:11270
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366339
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit 38df4c8470.
Reason for revert: updated ArrayTypes test for ES2 compatibility
Original change's description:
> Revert "Improve support for arrays in Metal."
>
> This reverts commit dd904af566.
>
> Reason for revert: breaks ANGLE
>
> Original change's description:
> > Improve support for arrays in Metal.
> >
> > Arrays in Metal now use the `array<T, N>` type instead of the C-style
> > `T[N]` type. This gives them semantics much more in line with GLSL,
> > so they can be initialized and assigned like GLSL arrays.
> >
> > This allows the ArrayTypes and Assignment tests to pass, so they have
> > been added to our dm SkSL tests. (ArrayConstructors also passes, but
> > is not ES2-compliant so it is not enabled.)
> >
> > Change-Id: Id1028311963084befd0e044e11e223af6a064dda
> > Bug: skia:10761, skia:10760, skia:11022, skia:10939
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365699
> > Commit-Queue: John Stiles <johnstiles@google.com>
> > Auto-Submit: John Stiles <johnstiles@google.com>
> > Reviewed-by: Brian Osman <brianosman@google.com>
>
> TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
>
> Change-Id: If6a18dea7d6a45fa7836e9129bf81c2e536f07e3
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:10761
> Bug: skia:10760
> Bug: skia:11022
> Bug: skia:10939
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365976
> Reviewed-by: John Stiles <johnstiles@google.com>
> Commit-Queue: John Stiles <johnstiles@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Bug: skia:10761
Bug: skia:10760
Bug: skia:11022
Bug: skia:10939
Change-Id: Ia1c4917f5d3c41162d282b3093814d861707ad30
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/366144
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
This reverts commit dd904af566.
Reason for revert: breaks ANGLE
Original change's description:
> Improve support for arrays in Metal.
>
> Arrays in Metal now use the `array<T, N>` type instead of the C-style
> `T[N]` type. This gives them semantics much more in line with GLSL,
> so they can be initialized and assigned like GLSL arrays.
>
> This allows the ArrayTypes and Assignment tests to pass, so they have
> been added to our dm SkSL tests. (ArrayConstructors also passes, but
> is not ES2-compliant so it is not enabled.)
>
> Change-Id: Id1028311963084befd0e044e11e223af6a064dda
> Bug: skia:10761, skia:10760, skia:11022, skia:10939
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365699
> Commit-Queue: John Stiles <johnstiles@google.com>
> Auto-Submit: John Stiles <johnstiles@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=brianosman@google.com,ethannicholas@google.com,johnstiles@google.com
Change-Id: If6a18dea7d6a45fa7836e9129bf81c2e536f07e3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:10761
Bug: skia:10760
Bug: skia:11022
Bug: skia:10939
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365976
Reviewed-by: John Stiles <johnstiles@google.com>
Commit-Queue: John Stiles <johnstiles@google.com>
Arrays in Metal now use the `array<T, N>` type instead of the C-style
`T[N]` type. This gives them semantics much more in line with GLSL,
so they can be initialized and assigned like GLSL arrays.
This allows the ArrayTypes and Assignment tests to pass, so they have
been added to our dm SkSL tests. (ArrayConstructors also passes, but
is not ES2-compliant so it is not enabled.)
Change-Id: Id1028311963084befd0e044e11e223af6a064dda
Bug: skia:10761, skia:10760, skia:11022, skia:10939
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365699
Commit-Queue: John Stiles <johnstiles@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
We now catch this error at IR generation time; previously we'd send it
to the driver (where it would fail to compile).
Change-Id: I45890214ffa164be1c0f359320f942bc4dc479ca
Bug: skia:11265
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365697
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
This uncovered a bug in Metal code generation of `matX *= matY` which is
now fixed. (It was emitting the helper function more than once.)
Change-Id: I0aeb0efe7ab5fbf5592a8ca6f4f5b50354d3d7f4
Bug: skia:11262
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/365489
Commit-Queue: John Stiles <johnstiles@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This works around a GLSL compilation bug on the Tecno Spark 3 Pro.
Change-Id: I516bd64745a8e99cccc87ee4bb2e1f5d5b26c130
Bug: skia:11255
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364116
Commit-Queue: Robert Phillips <robertphillips@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Previously, our only test was invoking `sin(1)` which is a pretty
ineffective test. Now, we test args and return types for all the basic
scalars/vectors/matrices.
Change-Id: I7d335303eef8b9c9c6cfef2265a15bbd9bd73e0c
Bug: skia:11246
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/363943
Auto-Submit: John Stiles <johnstiles@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
These are basic vector types, required by GLSL ES2, but we could not
create helper functions using them because they were missing from our
GrSLType enum. (This also prevented Runtime Effects from using these
types in helper functions.)
Change-Id: I78c328499e8ed90cb29c641b90ee59460a5a45de
Bug: skia:11246
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/364036
Commit-Queue: John Stiles <johnstiles@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: John Stiles <johnstiles@google.com>
