Replacement is v8::TracedReference in combination with v8::Global if a
callback is really needed.
Bug: v8:12603
Change-Id: Iae48fee2e6588a594d430c5f3a71ff0b3e67e5b2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3439873
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78950}
TracedNode is used as backing node for v8::TracedGlobal (with
destructor) and v8::TracedReference (no destructor).
A future change adds concurrent marking for TracedReference which
requires that the node stays around until the atomic pause to avoid
synchronization with the concurrent marker.
This change prepares TracedNode in prolonging the lifetime until the
it is actively cleared ("sweeped") in the atomic pause. This allows
for spuriously keeping alive a TracedNode for an additional GC cycle
in the case the the node was destroyed while the marker is running.
We maintain eager clearing of nodes where possible, i.e., outside of
incremental marking.
Bug: v8:12600
Change-Id: I9688c83a42b70d352c84613485f37242b1b910a6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3436805
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78947}
TimeTicks::HighResolutionNow is identical to TimeTicks::Now since 2018
(https://crrev.com/c/997153), but the declaration still has a wrong
comment about a non-existing DCHECK.
In order to avoid confusion, remove the redundant method and just use
TimeTicks::Now everywhere.
Drive-by: Make IsHighResolutionTimer "inline" instead of "V8_INLINE"
because it will only be called once anyway.
R=mlippautz@chromium.org
Bug: v8:12425
Change-Id: I31dc65f8c1ac910862e070e60e928054d4921154
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3439909
Reviewed-by: Yang Guo <yangguo@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78944}
This is a reland of 517ed4ad00
Original change's description:
> Reland "[Torque] Generalize Torque literals to larger size"
>
> Previously, literals in Torque were stored as double values, which
> made it impossible to precisely represent 64 bit integer values.
> This CL replaces the old literal expression with an integer and
> floating point literal expression that are unbounded in size. We
> allow implicit conversion of these literals to arbitary integer
> and floating point types respectively and insert a corresponding
> bounds check into generated CSA.
>
> Changes in the reland: Simplified IntegerLiteral to single digit.
>
> Bug: v8:7793, chromium:1289282
> Change-Id: I31c762c2f31165c7a1d0b07842b764e5851ce189
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3406750
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78811}
Bug: v8:7793, chromium:1289282
Change-Id: I7aadc4d2c9494f03eae85e94949c8f4cab7a075c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3437047
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78939}
The stack guard may update a shared memory's size. Therefore, we need to
update the size in the instance cache in Turbofan when StackCheck is
invoked for loops.
Change-Id: I1b000adad991a6b799ad37ba36c9a33c67559d3a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3423780
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78925}
This is a reland of f942f656dc
Changes: Change the order of initialization for wasm continuations to
ensure object integrity if a GC happens during allocation. Also add
missing handles.
Original change's description:
> Reland "[wasm] Resume suspender on resolved promise"
>
> This is a reland of a865d16bc2
>
> Changes:
> - Make the next ID atomic
> - Leave more space for runtime calls in debug mode
>
> Original change's description:
> > [wasm] Resume suspender on resolved promise
> >
> > Implement the WasmResume builtin, which resumes a wasm suspender
> > when the corresponding JS promise resolves.
> >
> > Drive-by 1: Fix detection of empty stacks in the stack frame iterator.
> > Drive-by 2: Add a stack ID for better tracing.
> >
> > R=ahaas@chromium.org
> > CC=fgm@chromium.org
> >
> > Bug: v8:12191
> > Change-Id: Ifa3f00c4259f802292b04d426c739e9b551f87b9
> > Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3420827
> > Reviewed-by: Andreas Haas <ahaas@chromium.org>
> > Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> > Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
> > Cr-Commit-Position: refs/heads/main@{#78842}
>
> Bug: v8:12191
> Change-Id: I3c231690b27be79a0c00e13043342bb4a3628886
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3427203
> Reviewed-by: Andreas Haas <ahaas@chromium.org>
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78890}
Bug: v8:12191
Change-Id: I0e1362d3a9da1fd8c0d600ad9776ce2fd26c6a52
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3434145
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78922}
The methods in explicit_management.h should be called via the public
variants in the subtle namespace. Calling the variants in the internal
namespace directly skips asserts and required size coversions. Doing so
may cause misuse of the api that may break GC inernals
Change-Id: I58a0f324ca1ee0839bb85eb9b53ce57785dc7b91
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3435187
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78920}
- Heap-stats was trying to load the map without explicitly passing in
the PtrComprBase causing failures with Code objects in external code
space
- Extend the debugPrint.js tests to run with some more debugging and
testing flags to prevent future regressions
Change-Id: I1f0d03cb31480f316fe533b507ff98fe3befbe8e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3432386
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Auto-Submit: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78919}
This makes the bulk memory operations respect the memory type, i.e.
using i64 values for memory offsets if memory64 is enabled.
The called C functions now expect memory offsets to be passed as
{uintptr_t}, such that we can address any memory on all systems. For
64-bit memories on 32-bit systems, the upper half of the 64-bit value is
checked in compiled code before passing the lower half to the C
function.
Liftoff support turned out to be a bit harder than expected, because we
cannot hold three 64-bit values in registers on ia32 (not enough
registers...). Thus implement that in a follow-up CL.
R=thibaudm@chromium.org
Bug: v8:10949, chromium:1281995
Change-Id: Ie77636145f94cc579d479c4e7c346ba3c682679d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3427206
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78918}
This CL adds invalidations for slots that reside in promptly freed or
shrunk storage.
Bug: chromium:1029379
Change-Id: I05e0ede55c202c952b26f452053b8777d1a2ffae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3431488
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Anton Bikineev <bikineev@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78912}
Conceptually, a full GC cycle completes when the sweeping phase is
finished. As sweeping is performed concurrently, this happens after
Heap::CollectGarbage has returned and, at the latest, before the next
full GC cycle begins. However, an arbitrary number of young GC cycles
may happen in the meantime. Tracing information for the sweeping phase
must be added to the corresponding full GC cycle event. Until now, this
was not done correctly: this information was added to the GCTracer's
current event and could thus be attributed to a subsequent young or full
GC cycle.
This CL introduces methods GCTracer::(Start|Stop)Cycle to delimit a
cycle (still allowing for full GC cycles to be interrupted by young GC
cycles). These methods are different from (Start|Stop)ObservablePause,
which delimit the observable pause of each GC. The events of "pending"
full GC cycles are kept until they are properly amended and reported,
when the sweeping phase is finished.
This is a reland of 4ad20bff97
which was reviewed here: https://crrev.com/3404733
Bug: v8:12503
Bug: chromium:1154636
Change-Id: Icc315b53cff1f3b19b8efe49db34340a5608bcd2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3432211
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Nikolaos Papaspyrou <nikolaos@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78911}
This reverts commit 4ad20bff97.
Reason for revert: New test seems to be failing on TSAN/incremental marking stress (https://ci.chromium.org/ui/p/v8/builders/ci/V8%20Linux64%20TSAN%20-%20stress-incremental-marking/6346/overview)
Original change's description:
> heap: Fix the tracing of GC cycles
>
> Conceptually, a full GC cycle completes when the sweeping phase is
> finished. As sweeping is performed concurrently, this happens after
> Heap::CollectGarbage has returned and, at the latest, before the next
> full GC cycle begins. However, an arbitrary number of young GC cycles
> may happen in the meantime. Tracing information for the sweeping phase
> must be added to the corresponding full GC cycle event. Until now, this
> was not done correctly: this information was added to the GCTracer's
> current event and could thus be attributed to a subsequent young or full
> GC cycle.
>
> This CL introduces methods GCTracer::(Start|Stop)Cycle to delimit a
> cycle (still allowing for full GC cycles to be interrupted by young GC
> cycles). These methods are different from (Start|Stop)ObservablePause,
> which delimit the observable pause of each GC. The events of "pending"
> full GC cycles are kept until they are properly amended and reported,
> when the sweeping phase is finished.
>
> Bug: chromium:1154636
> Change-Id: I2fbc65d4807c78656d4abc8c451043f6f86211b1
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3404733
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Reviewed-by: Omer Katz <omerkatz@chromium.org>
> Commit-Queue: Nikolaos Papaspyrou <nikolaos@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78905}
Bug: chromium:1154636
Change-Id: Id6688cfe982f9d8159c66d715b7079782a371bed
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3431489
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Owners-Override: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78908}
This is the second step towards moving away from sending `url` with
every call frame when emitting the `Debugger.paused` event.
Bug: chromium:1270316, chromium:1271078
Change-Id: Ib4f996024b5200cded155bd8a564d01d36856400
Doc: https://bit.ly/devtools-debugger-callframe-url
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3431485
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78906}
Conceptually, a full GC cycle completes when the sweeping phase is
finished. As sweeping is performed concurrently, this happens after
Heap::CollectGarbage has returned and, at the latest, before the next
full GC cycle begins. However, an arbitrary number of young GC cycles
may happen in the meantime. Tracing information for the sweeping phase
must be added to the corresponding full GC cycle event. Until now, this
was not done correctly: this information was added to the GCTracer's
current event and could thus be attributed to a subsequent young or full
GC cycle.
This CL introduces methods GCTracer::(Start|Stop)Cycle to delimit a
cycle (still allowing for full GC cycles to be interrupted by young GC
cycles). These methods are different from (Start|Stop)ObservablePause,
which delimit the observable pause of each GC. The events of "pending"
full GC cycles are kept until they are properly amended and reported,
when the sweeping phase is finished.
Bug: chromium:1154636
Change-Id: I2fbc65d4807c78656d4abc8c451043f6f86211b1
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3404733
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Commit-Queue: Nikolaos Papaspyrou <nikolaos@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78905}
The CL does following:
1) Makes sure young generation works and tests pass;
2) Provides CollectGarbageInYoungGenerationForTesting() that is needed
to support remaining tests in Blink;
3) Moved cppgc_enable_young_generation GN flag to v8.gni to refer to it
from Blink;
4) Bails out from marking TracedReferences in UnifiedHeapMarkingState;
5) Disables (temporarily) prompt freeing for young generation;
6) Fixes remembered set visitation for nullptr|kSentinel slots.
Bug: chromium:1029379
Change-Id: I5165fa22c8a0eaa708ef7a35a9978cb12e1cb13e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3429202
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Auto-Submit: Anton Bikineev <bikineev@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78901}
This is a reland of a865d16bc2
Changes:
- Make the next ID atomic
- Leave more space for runtime calls in debug mode
Original change's description:
> [wasm] Resume suspender on resolved promise
>
> Implement the WasmResume builtin, which resumes a wasm suspender
> when the corresponding JS promise resolves.
>
> Drive-by 1: Fix detection of empty stacks in the stack frame iterator.
> Drive-by 2: Add a stack ID for better tracing.
>
> R=ahaas@chromium.org
> CC=fgm@chromium.org
>
> Bug: v8:12191
> Change-Id: Ifa3f00c4259f802292b04d426c739e9b551f87b9
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3420827
> Reviewed-by: Andreas Haas <ahaas@chromium.org>
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78842}
Bug: v8:12191
Change-Id: I3c231690b27be79a0c00e13043342bb4a3628886
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3427203
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78890}
We temporarily disable fuzzing for wasm-gc until we update the fuzzer
to the isorecursive hybrid type system.
Bug: chromium:1291959
Change-Id: I2238c37bc49cbac2bf1c4085815a2283db982ab3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3423782
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78869}
For backwards compatibility, we do not impose this restriction on
nominal modules.
Bug: v8:7748
Change-Id: I42c4dc824fc9824280527522b05fa3bf68c8929b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3422638
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78868}
Previously we'd predict exceptions thrown in [[Reject]] handlers as
always caught (by PromiseRejectReactionJob), but that's not what is
actually specified in ECMAScript. The PromiseRejectReactionJob will turn
any exception thrown into a promise rejection just like we do in the
case of PromiseFulfillReactionJob, and so the catch prediction should
match that behavior.
Fixed: chromium:1290861
Change-Id: Id992708b009666da7c6bf1b6e3cf30752ca0a227
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3423775
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Jaroslav Sevcik <jarin@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78864}
This reverts commit 7f26cbd291.
Reason for revert: Issue 1292333: DCHECK failure in op->IsStackSlot() || op->IsFPStackSlot() in code-generator-x64.cc
Original change's description:
> [fastcall] Add Wasm entry for Fast API calls
>
> Allow Wasm to generate calls directly to Fast API C functions.
> This massively reduces the overhead of these calls (~300%).
> Currently options parameter is not supported.
>
> This is a reland of
> https://chromium-review.googlesource.com/c/v8/v8/+/3364356
> with a fix to a data race.
>
> Bug: chromium:1052746
> Change-Id: I8c1c255419496d03a94ec2b443329842469586d5
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3398394
> Reviewed-by: Maya Lekova <mslekova@chromium.org>
> Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Commit-Queue: Paolo Severini <paolosev@microsoft.com>
> Cr-Commit-Position: refs/heads/main@{#78714}
Bug: chromium:1052746
Change-Id: Ieb3f6f836bd604b0e4c5801f082997831eb7ac26
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3426610
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78861}
Since inheritance depth of every type is known in the isorecursive
hybrid type system, rtts with depth are removed. This enables
simplification of type checks in Liftoff and Turbofan, as well as
decoding of object allocation instructions.
Bug: v8:7748
Change-Id: I6b52579b584191d92644de1c6e805d9f054641d3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3422626
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78860}
They're failing due to Inf/NaN differences after the latest clang roll,
skipping for now to keep the tree green. A follow-up CL will likely want
to broaden the expectations for these tests to allow both Inf & NaN in
certain cases.
Bug: v8:12588
Change-Id: I8055b67077fc67cc65246a89a4b4949d8838829e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3425660
Commit-Queue: Adam Klein <adamk@chromium.org>
Auto-Submit: Adam Klein <adamk@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78855}
Runtime_HasProperty already does the right thing; this CL is directing
more cases to it.
Bug: v8:12580
Change-Id: I16ae6099fa9781ecc663085e87a7fc59abd10d02
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3422639
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78850}
This reverts commit 517ed4ad00.
Reason for revert: There still seems to be an issue on V8 Win msvc related to this CL (https://ci.chromium.org/ui/p/v8/builders/ci/V8%20Win64%20-%20msvc/20568/overview).
Original change's description:
> Reland "[Torque] Generalize Torque literals to larger size"
>
> Previously, literals in Torque were stored as double values, which
> made it impossible to precisely represent 64 bit integer values.
> This CL replaces the old literal expression with an integer and
> floating point literal expression that are unbounded in size. We
> allow implicit conversion of these literals to arbitary integer
> and floating point types respectively and insert a corresponding
> bounds check into generated CSA.
>
> Changes in the reland: Simplified IntegerLiteral to single digit.
>
> Bug: v8:7793, chromium:1289282
> Change-Id: I31c762c2f31165c7a1d0b07842b764e5851ce189
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3406750
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78811}
Bug: v8:7793, chromium:1289282
Change-Id: I818cec9625fbd827a4a30088d8c8b759fb6c50d7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3424484
Owners-Override: Nico Hartmann <nicohartmann@chromium.org>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78847}
Implement the WasmResume builtin, which resumes a wasm suspender
when the corresponding JS promise resolves.
Drive-by 1: Fix detection of empty stacks in the stack frame iterator.
Drive-by 2: Add a stack ID for better tracing.
R=ahaas@chromium.org
CC=fgm@chromium.org
Bug: v8:12191
Change-Id: Ifa3f00c4259f802292b04d426c739e9b551f87b9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3420827
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78842}
This is a reland of 12e46091a0
Original change's description:
> [heap] Support client-to-shared refs in Code objects
>
> Support references from code objects in the client heaps to shared heap objects. Such references are stored in a remembered set during marking, which is later used for updating pointers.
>
> Bug: v8:11708
> Change-Id: I8aeb508ddd14514ca65fa5acf3030dd8c2040168
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401588
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78819}
Bug: v8:11708
Change-Id: I47bcf44b452fcffe8675fba03244b736ede14247
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3422630
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78838}
We can avoid a pointer deref if the ValueSerializer is inlined in
WebSnapshotDeserializer.
Bug: v8:11525
Change-Id: I92d8cac37af3fdbe04a66465f97761bf5a9fd705
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3417433
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78830}
With dynamic tiering, the total amount of code generated for a
WebAssembly module decreases significantly. However, the amount of
code space we reserved for generated code has not been adjusted yet.
This CL adds a parameter for dynamic tiering to
EstimateNativeModuleCodeSize. If dynamic tiering is used, then the code
space reserved for TurboFan gets reduced to a quarter of the code space
without dynamic tiering.
Reserving a quarter of the space seems to be still quite generous. Even
Google Earth, seems to use a lot of its code, only needs less than 20%.
R=clemensb@chromium.org
Bug: chromium:1285334
Change-Id: I7dce0821b5e46d7240dfb1523031de84b1fe1348
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3420307
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78826}
Drive-by fix to align what builds the test runner considers to be able
to have shared memory features and what builds can create a shared
Isolate.
Bug: v8:12007
Change-Id: I151513ccbfbee31e5b35c5ce8e9192732eabfee2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3421507
Reviewed-by: Adam Klein <adamk@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78824}
This reverts commit 12e46091a0.
Reason for revert: new test fails on GC stress bot:
https://cr-buildbucket.appspot.com/build/8823858142855002833
Original change's description:
> [heap] Support client-to-shared refs in Code objects
>
> Support references from code objects in the client heaps to shared heap objects. Such references are stored in a remembered set during marking, which is later used for updating pointers.
>
> Bug: v8:11708
> Change-Id: I8aeb508ddd14514ca65fa5acf3030dd8c2040168
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401588
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78819}
Bug: v8:11708
Change-Id: If8d15a22651f8b1cfca61be21a81f60b43f008a4
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3421725
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Commit-Queue: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78821}
Support references from code objects in the client heaps to shared heap objects. Such references are stored in a remembered set during marking, which is later used for updating pointers.
Bug: v8:11708
Change-Id: I8aeb508ddd14514ca65fa5acf3030dd8c2040168
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401588
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78819}
- It changes ContextSlotIndex from static to non-static.
- Updates ContextSlotIndex and ScriptContextTable::Lookup to use
handles, since it is necessary for the NameToIndexHashTable::Add
- Adds a NameToIndexHashTableLookup to CSA.
- Renames LocalNamesIterator to LocalNamesRange and iterates the
hashtable when local names are not inlined.
Bug: v8:12315
Change-Id: I2c8c933002fe73f4def145bc207825823262d743
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3406751
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Victor Gomes <victorgomes@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78818}
This CL replaces the equirecursive type system for wasm-gc with the
isorecursive hybrid type system presented here:
https://github.com/WebAssembly/gc/issues/257.
In broad strokes, this includes the following changes:
- In the module decoder, remove equirecursive types. Implement recursive
type groups, subtype definitions, and function/struct/array
definitions. Treat nominal modules as syntactic sugar of an
isorecursive module, where all types belong in the same recursive
group.
- Remove rtt.sub and all related infrastructure.
- Change subtyping to work with explicit supertypes only.
- Add ValidSubtypeDefinition in subtyping, to check that subtype
declarations are valid during decoding.
- Remove the subtyping cache.
- Add support for functions to have specific signature index in
WasmModuleBuilder and in test-gc.cc.
- Adapt tests.
Current restrictions:
- Recursive groups are not stored beyond decoding.
- Type canonicalization is not implemented. No tests relying on types
being considered identical post-canonicalization.
- No cross-module subtyping is possible. Tests relying on cross-module
subtyping have been commented out.
Bug: v8:7748
Change-Id: I69fd04ecc5611f6230c95d5c89d1c520163fffae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3416239
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78816}
Changes:
- Introduce {TypeDefinition} for wasm modules.
- Introduce an enum {TypeDefinition::Kind} to represent the three
different definition types.
- Collapse the {types}, {type_kinds} and {supertypes} vectors into a
single vector of {TypeDefinition}s.
- Use {TypeDefinition} in WasmModuleBuilder.
- Drive-by: Remove {kNullIndex} in WasmModuleBuilder.
- Drive-by: Tidy-up wasm-module.h.
Change-Id: I97c2c268bcad745176243c693cf169bfa5714f94
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3416233
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78813}
Previously, literals in Torque were stored as double values, which
made it impossible to precisely represent 64 bit integer values.
This CL replaces the old literal expression with an integer and
floating point literal expression that are unbounded in size. We
allow implicit conversion of these literals to arbitary integer
and floating point types respectively and insert a corresponding
bounds check into generated CSA.
Changes in the reland: Simplified IntegerLiteral to single digit.
Bug: v8:7793, chromium:1289282
Change-Id: I31c762c2f31165c7a1d0b07842b764e5851ce189
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3406750
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78811}
This CL replaces 'InvalidArgument' with 'ServerError' for
Runtime#getExceptionDetails. The reason is that the error we
raise is on the application level, allowing the DevTools frontend
to handle it to a certain degree. 'InvalidArgument' errors would be
interpreted as "something went really wrong", which is not the case
here.
Bug: chromium:1280141
Change-Id: Id72f06ce8daa06875adeb2528638a80ae61d9e55
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3420304
Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
Commit-Queue: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78809}
The functionality is unused and we are simplifying OptimizationMarker
usage.
Drive-by: Remove unused return value of Compiler::CompileOptimized.
Drive-by: Don't add kStackSpaceRequiredForCompilation as gap to the
stack check when compiling concurrently, i.e. on another thread.
Bug: chromium:757467
Change-Id: Ibbe204b82bf937b9eb74f9eb2c3fd2d719d53ef9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3416245
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78800}
This is a reland of 5320fe8d58
Changes since revert:
- Remove stale DCHECK in deserializer
Original change's description:
> Reland "[string] Support shared strings in Value{Serializer,Deserializer}"
>
> This is a reland of 3cb4039cd1
>
> Changes since revert:
> - Fix FLAG_stress_scavenge interaction with shared Isolate
> - Use the shared Isolate's global handles to keep shared values
> alive in transit during a postMessage
>
> Original change's description:
> > [string] Support shared strings in Value{Serializer,Deserializer}
> >
> > When FLAG_shared_string_table is true, postMessaging strings will share
> > instead of copy.
> >
> > Note that not all operations on shared strings are supported, and shared
> > strings may be slower than non-shared strings for some operations.
Bug: v8:12007
Change-Id: I70782978ed05558615eca03bafc4c12eba3644ca
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3417189
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78791}
Create and return the chained promise, which resumes the suspended wasm
continuation once the JS promise resolves:
- Add stub for the WasmResume builtin, which will resume the given
suspender.
- Add the JS function wrapper for the builtin.
- On suspension, return promise.then(onFulfilled) to the prompt.
R=ahaas@chromium.org
CC=fgm@chromium.org
Bug: v8:12191
Change-Id: I2d6136b2bd610daa4be1880f347b7bdf897e75ac
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3404776
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78787}
When reparsing the class scope to collect initializers in sloppy mode,
the class scope may still have a scope info without any allocated
variables. If its outer scope doesn't have an outer scope (which means
the outer scope in the optimized scope chain becomes the script scope),
we should also set the scope info in the script scope as is done
in Scope::DeserializeScopeChain() for the scope resolution.
Bug: chromium:1290587, v8:10704
Change-Id: I7804d53f330e59d4ab0405a11b132569f348b55d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3413647
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Cr-Commit-Position: refs/heads/main@{#78784}
This is a reland of 3cb4039cd1
Changes since revert:
- Fix FLAG_stress_scavenge interaction with shared Isolate
- Use the shared Isolate's global handles to keep shared values
alive in transit during a postMessage
Original change's description:
> [string] Support shared strings in Value{Serializer,Deserializer}
>
> When FLAG_shared_string_table is true, postMessaging strings will share
> instead of copy.
>
> Note that not all operations on shared strings are supported, and shared
> strings may be slower than non-shared strings for some operations.
>
> Bug: v8:12007
> Change-Id: I3462128e15410d2568868143571571b3025722c1
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3277250
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Commit-Queue: Shu-yu Guo <syg@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78614}
Bug: v8:12007
Change-Id: I5d9b99b2dac6f26d5ef046d7aec94f1a1d219419
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel_ng
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3389533
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78761}
When sandboxed external pointers are enabled, external pointers now only
require 32 bits of storage space in a HeapObject. This CL does not shrink
the size of EmbedderDataSlots, which will happen in a follow-up CL.
Bug: v8:10391
Change-Id: I3cf8b68c3b985cf806a45183717f50462a88c281
Cq-Include-Trybots: luci.v8.try:v8_linux64_heap_sandbox_dbg_ng,v8_linux_arm64_sim_heap_sandbox_dbg_ng
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3359629
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Samuel Groß <saelo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78754}
This is a reland of 91f08378bc
When the class scope does not need a context, the deserialized
outer scope of the initializer scope would not be the class scope,
and we should not and do not need to use it to fix up the allocation
information of the context-allocated variables. The original patch
did not consider this case and resulted in a regression when we
tried to reparse the initializer function to look for destructuring
assignment errors. This fixes the regression by not deserializing
the class scope that's going to be reparsed, and using the positions
of the scopes to tell whether the scope info matches the reparsed
scope and can be used to fix up the allocation info.
Original change's description:
> [class] implement reparsing of class instance member initializers
>
> Previously, since the source code for the synthetic class instance
> member initializer function was recorded as the span from the first
> initializer to the last initializer, there was no way to reparse the
> class and recompile the initializer function. It was working for
> most use cases because the code for the initializer function was
> generated eagarly and it was usually alive as long as the class was
> alive, so the initializer wouldn't normally be lazily parsed. This
> didn't work, however, when the class was snapshotted with
> v8::SnapshotCreator::FunctionCodeHandling::kClear,
> becuase then we needed to recompile the initializer when the class
> was instantiated. This patch implements the reparsing so that
> these classes can work with FunctionCodeHandling::kClear.
>
> This patch refactors ParserBase::ParseClassLiteral() so that we can
> reuse it for both parsing the class body normally and reparsing it
> to collect initializers. When reparsing the synthetic initializer
> function, we rewind the scanner to the beginning of the class, and
> parse the class body to collect the initializers. During the
> reparsing, field initializers are parsed with the full parser while
> methods of the class are pre-parsed.
>
> A few notable changes:
>
> - Extended the source range of the initializer function to cover the
> entire class so that we can rewind the scanner to parse the class
> body to collect initializers (previously, it starts from the first
> field initializer and ends at the last initializer). This resulted
> some expectation changes in the debugger tests, though the
> initializers remain debuggable.
> - A temporary ClassScope is created during reparsing. After the class
> is reparsed, we use the information from the ScopeInfo to update
> the allocated indices of the variables in the ClassScope.
>
> Bug: v8:10704
> Change-Id: Ifb6431a1447d8844f2a548283d59158742fe9027
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2988830
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Commit-Queue: Joyee Cheung <joyee@igalia.com>
> Cr-Commit-Position: refs/heads/main@{#78299}
Bug: chromium:1278086, chromium:1278085, v8:10704
Change-Id: Iea4f1f6dc398846cbe322adc16f6fffd6d2dfdf3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3325912
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Cr-Commit-Position: refs/heads/main@{#78745}
The allocatable registers have holes, so not all FP registers are one
half of a valid SIMD register. Thus check if {GetAliases} returned an
allocatable SIMD register before looking up if that register is being
used. Otherwise we run into a DCHECK because {simd_reg} is invalid.
The bug was only introduced recently: https://crrev.com/c/3404780R=thibaudm@chromium.org
Bug: chromium:1290079, v8:12330
Change-Id: I99df1645cfeec375daec82dbf41c110b5474339c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3412075
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78742}
Moves between stack slots are rare; they mostly happen for tail calls
or for multi-return blocks. The bug exists since a long time, but was
only uncovered by the fuzzer now.
R=ahaas@chromium.org
Bug: chromium:1289678
Change-Id: Ibb0917717c6b7a468f5fcbb01be34267ba06a449
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3406749
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78736}
Changes:
- Rename kWasmTrapDataSegmentDropped to the more accurate ~OutOfBounds.
- Drop unused argument from {WasmCompiler::ArrayInit}.
- Rename {Factory::NewWasmArray} -> NewWasmArrayFromElements.
- Add error handling to {InitExprInterface}.
- Allow the data count section to appear anywhere in the module under
--experimental-wasm-gc. Add the same capability in
wasm-module-builder.js.
- Add {WasmArray::MaxLength(uint32_t element_size_log2)}.
- Add kTrapArrayTooLarge in wasm-module-builder.js.
- Small test improvements in gc-nominal.js.
Bug: v8:7748
Change-Id: I68ca0e8b08f906503f0d82e5866395018d216382
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401593
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78730}
This is similar to the previous SIMD spilling fixes, but this time at
block merges. The logic is similar to the existing cases, but not quite
the same. I did not find a nice way to unify the different locations
where we check for SIMD register overlap.
R=thibaudm@chromium.org
Bug: chromium:1283395, v8:12330
Change-Id: I5ab9b6831368cbce40b8368e4ec7954e985bff96
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3404780
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78720}
The C-API does not support dynamic tiering and still waits for top-tier
compilation to finish before serializing code when the explicit
serialize() function gets called. This means that serialize() can only
finish if the kFinishedTopTierCompilation event was triggered first.
With this CL the kFinishedTopTierCompilation event is also triggered
after deserialization so that serialize() can work after
deserialization.
R=clemensb@chromium.org
Bug: v8:11024
Change-Id: I3dd14e37087e3cbfbc28cb5625c9f3715f6c236b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3404773
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78719}
We used to serialize the full source code of the script being
serialized. This CL makes the source code maximally minimal (only
including the needed outer functions) while maintaining the "inner
function is textually inside its outer function" relationship.
Bug: v8:11525
Change-Id: Ic42772f7ecb76744bc11b97fa1784d847558e1f6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401864
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78716}
Save the PC in the jump buffer and implement the suspend builtin.
R=ahaas@chromium.org
CC=fgm@chromium.org
Bug: v8:12191
Change-Id: I1a6d965d7864dce0a572f6c8d7102046dad190fd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3345006
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78715}
Allow Wasm to generate calls directly to Fast API C functions.
This massively reduces the overhead of these calls (~300%).
Currently options parameter is not supported.
This is a reland of
https://chromium-review.googlesource.com/c/v8/v8/+/3364356
with a fix to a data race.
Bug: chromium:1052746
Change-Id: I8c1c255419496d03a94ec2b443329842469586d5
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3398394
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Paolo Severini <paolosev@microsoft.com>
Cr-Commit-Position: refs/heads/main@{#78714}
So far this flag was process-global, so if one isolate used v8::Locker
all isolates were forced to use v8::Locker. With the shared isolate
now being a thing that routinely gets migrated between different
threads, all users of the shared isolate would be forced to use
v8::Locker. So we now store that flag on the isolate such that using
v8::Locker for the shared isolate does not affect other isolates.
Deprecate v8::Locker::WasEverUsed() at the same time.
Bug: v8:11708
Change-Id: I60531f084cc1b1b113620c46f5bed20511f52c26
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401595
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78712}
This reverts commit 757830b02b.
Reason for revert: Speculatively revert due to a number of
performance regressions
Original change's description:
> [Torque] Generalize Torque literals to larger size
>
> Previously, literals in Torque were stored as double values, which
> made it impossible to precisely represent 64 bit integer values.
> This CL replaces the old literal expression with an integer and
> floating point literal expression that are unbounded in size. We
> allow implicit conversion of these literals to arbitary integer
> and floating point types respectively and insert a corresponding
> bounds check into generated CSA.
>
> Bug: v8:7793
> Change-Id: I46c231aab92bc2f0c26955d1876079f306b358c6
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3329792
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78671}
Bug: v8:7793
Change-Id: I9896e28b3c69b8cf2488bf93e993ec320d8c5d2e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401866
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Owners-Override: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78706}
Split method into ShouldRecordRelocSlot and ProcessRelocInfo.
ProcessRelocInfo can then be reused in the write barrier and in the
future for the OLD_TO_SHARED remembered set. SlotTypeForRelocInfoMode
got moved into ProcessRelocInfo.
In addition rename and document SlotTypes. This CL does not change
behavior.
Bug: v8:11708
Change-Id: Iff712e7e6f5d3a4da64510b67b604b9e04998361
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3400968
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78701}
Use the FatalProcessOutOfMemory function such that tooling recognizes
these crashes as OOM's.
Drive-by: Skip one more test that leads to such stack overflows.
Fixed: v8:12555, chromium:1288456
Bug: v8:12472
Change-Id: Ib9203a4aa0487744f7cea9a212aeeffda579ae23
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3401861
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78692}
This is a regression test for the fixes in
https://crrev.com/c/v8/v8/+/3299592 . Some of the helper functions were
copied from console-retaining-path.js in the same directory.
Bug: v8:12112
Change-Id: I3c313ad003ede5e5036f886161e1d164c98f87fe
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3400149
Reviewed-by: Simon Zünd <szuend@chromium.org>
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Cr-Commit-Position: refs/heads/main@{#78689}
super.property accesses in heritage positions like `class C extends
super.property` should resolve super in the current scope, not C's
class scope.
Bug: chromium:1282096
Change-Id: I7ef815bc02cfff35a2898ef9f39b133d1114046c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3400150
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78687}
Also:
- Refactor the ValueSerializer tests using raw data, so that we test all
valid versions for each test (not only one hard-coded one)
- Mark some tests as backwards compatibility tests, to make it less
likely that somebody updates them not realizing they are backwards
compatibility tests.
Bug: v8:11111, v8:12532
Change-Id: I670849de07742c8d442249ef4f013781e4ee9255
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3386802
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78681}
This is a reland of f1c2a2089d
Changes compared to original:
Revert test change which used simd and caused problems in multiple test
configurations.
Original change's description:
> [wasm] Various small cleanups/fixes
>
> Changes:
> - Fix a bug in objects-printer where array elements were not treated as
> tagged pointers.
> - Fix a few TODOs, mainly in the wasm interpreter.
> - Improve documentation, small refactorings.
>
> Change-Id: I1d70ad454b3a0693b9b784b17395434d81d01b61
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3383136
> Reviewed-by: Nikolaos Papaspyrou <nikolaos@chromium.org>
> Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
> Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78656}
Change-Id: I91f4fed5fbc91acb8b42413a6f40a8202bd43096
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3398111
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78677}
CDP has a "ExceptionDetails" structure that is attached to various
CDP commands, e.g. "Runtime#exceptionThrown" or "Runtime#evaluate".
The stack trace in the "ExceptionDetails" structure is used in
various places in DevTools. The information in the "ExceptionDetails"
structure is extracted from a v8::Message object. Message objects
are normally created at the exception throw site and may augment
the error with manually inspecting the stack (both to capture a fresh
stack trace in some cases, as well as to calculate location info).
The problem is that in some cases we want to get an "ExceptionDetails"
structure after the fact, e.g. when logging a JS "Error" object in
a catch block. To help in this case, this CL introduces a new
CDP method "Runtime#getExceptionDetails" that behaves exactly as
advertised: It provides a populated "ExceptionDetails" structure
from a JS Error object.
R=bmeurer@chromium.org
Doc: https://bit.ly/runtime-get-exception-details
Bug: chromium:1278650
Change-Id: I084be10c1d852d3b7cac8d88e7f820e867be4722
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3337258
Commit-Queue: Simon Zünd <szuend@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78676}
Previously, literals in Torque were stored as double values, which
made it impossible to precisely represent 64 bit integer values.
This CL replaces the old literal expression with an integer and
floating point literal expression that are unbounded in size. We
allow implicit conversion of these literals to arbitary integer
and floating point types respectively and insert a corresponding
bounds check into generated CSA.
Bug: v8:7793
Change-Id: I46c231aab92bc2f0c26955d1876079f306b358c6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3329792
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78671}
Apply case-insensitive comparisons not only for the initial character,
but for the entire prefix. This avoids degenerate behavior for patterns
like /aaaa|AAAA|AAAA/i (i.e. generate a single 4-char prefix instead of
four 1-char prefixes).
Bug: v8:12472
Change-Id: Ib2b49fe73ca846a1b7ec90056cc64bdf5cf33026
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3398114
Reviewed-by: Patrick Thier <pthier@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78668}
Recursive ToNode node generation may overflow the stack for large
graphs. As a quick fix, insert periodic stack overflow checks in
selected ToNode methods.
As a more permanent fix, in the future we could abort gracefully
(instead of crashing on a CHECK), and/or refactor into iterative node
generation.
Bug: v8:12472
Change-Id: Ie5fbe838c5f6a5192d7d9b44bfe6f6c76a8d26e7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3398112
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78667}
These tests cover the basic VirtualAddressSpace functionality for the
three different types of address spaces currently available: the root
space, subspaces, and emulated subspaces.
This CL also includes minor bugfixes in VirtualAddressSpace
implementations and removes RandomizedVirtualAlloc in platform-win32.cc
which doesn't seem to do anything useful anymore but prevents page
allocation hints from working correctly.
Bug: v8:10391
Change-Id: Ifa260d18fd366516b5a41ab42ce2f1785c57d061
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3386801
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Samuel Groß <saelo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78666}
This reverts commit bd72152e7d.
Reason for revert: TSAN reports a data race, please see https://ci.chromium.org/ui/p/v8/builders/ci/V8%20Linux64%20TSAN%20-%20isolates/18124/overview
Original change's description:
> [fastcall] Add Wasm entry for Fast API calls
>
> Allow Wasm to generate calls directly to Fast API C functions.
> This massively reduces the overhead of these calls (~300%).
> Currently options parameter is not supported.
>
> This is a rebase of the work originally done by devsnek in:
> https://chromium-review.googlesource.com/c/v8/v8/+/2718666.
>
> Bug: chromium:1052746
> Change-Id: I1bb1de68b440044cc8a4e528adf9d8e0e6692a07
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364356
> Reviewed-by: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
> Reviewed-by: Maya Lekova <mslekova@chromium.org>
> Commit-Queue: Paolo Severini <paolosev@microsoft.com>
> Cr-Commit-Position: refs/heads/main@{#78664}
Bug: chromium:1052746
Change-Id: I957708cf1cff6ee8f90678ee48428f5c12f75a53
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3398121
Auto-Submit: Maya Lekova <mslekova@chromium.org>
Owners-Override: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Cr-Commit-Position: refs/heads/main@{#78665}
Allow Wasm to generate calls directly to Fast API C functions.
This massively reduces the overhead of these calls (~300%).
Currently options parameter is not supported.
This is a rebase of the work originally done by devsnek in:
https://chromium-review.googlesource.com/c/v8/v8/+/2718666.
Bug: chromium:1052746
Change-Id: I1bb1de68b440044cc8a4e528adf9d8e0e6692a07
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364356
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Paolo Severini <paolosev@microsoft.com>
Cr-Commit-Position: refs/heads/main@{#78664}
Previously, StoreOwnIC incorrectly reuses the [[Set]] semantics
when initializing public literal class fields and object literals in
certain cases (e.g. when there's no feedback).
This was less of an issue for object literals, but with public class
fields it's possible to define property attributes while the
instance is still being initialized, or to encounter existing static
"name" or "length" properties that should be readonly. This patch
fixes it by
1) Emitting code that calls into the slow stub when
handling StoreOwnIC with existing read-only properties.
2) Adding extra steps in StoreIC::Store to handle such stores
properly with [[DefineOwnProperty]] semantics.
Bug: v8:12421, v8:9888
Change-Id: I6547320a1caba58c66ee1043cd3183a2de7cefef
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3300092
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Cr-Commit-Position: refs/heads/main@{#78659}
Changes:
- Fix a bug in objects-printer where array elements were not treated as
tagged pointers.
- Fix a few TODOs, mainly in the wasm interpreter.
- Improve documentation, small refactorings.
Change-Id: I1d70ad454b3a0693b9b784b17395434d81d01b61
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3383136
Reviewed-by: Nikolaos Papaspyrou <nikolaos@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78656}
This CL introduces a dedicated API to retrieve the current (w.r.t. the
JS stack) script name or sourceURL. Currently, API clients will
collect multiple stack traces in increasing sizes to accomplish the
same goal. The new method walks the JS stack in the same way as the
stack trace collection mechanic but doesn't create/allocate stack info
or callsite objects along the way.
R=bmeurer@chromium.org, yangguo@chromium.org
Doc: https://bit.ly/v8-current-script-name
Bug: chromium:1286677
Change-Id: Id53e4f04bf17349d34f3d581bc712b1f4aa055db
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3382818
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78645}
Now that concurrent inlining is shipping on stable, remove support
--no-concurrent-inlining.
Note that it's still possible to run Turbofan exclusively on the
main thread by passing --no-concurrent-recompilation.
Bug: v8:7790, v8:12142, chromium:1240585
Change-Id: I1943bbbcad7dea7e3a3c337c239f14f7d96c23cd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3308798
Reviewed-by: Liviu Rau <liviurau@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78644}
The receiver is included unconditionally on all platforms
(kJSArgcIncludesReceiver is always true).
Remove all usages of kJSArgcIncludesReceiver from the code.
Bug: v8:11112
Change-Id: I7d62e6de65b73fe6d8c3293f32b500b760b08a3e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3322980
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78642}
The fast path has an early return if the two inputs are the same
object. However, this was missing the check that the receiver
is not undefined required by the spec.
This fixes it by first checking that the receiver is a string and
only afterwards checking for reference equality.
Bug: v8:12495
Change-Id: I4c5fc80e09060b013c94b05bbc9da504ddbb5206
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3386602
Auto-Submit: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78637}
Shell::FetchModuleTree assumes that the module at file_name wasn't
already fetched. Shell::ExecuteModule is calling into
FetchModuleTree without checking if the module is already in the module
map, violating this assumption.
This change fixes this by having Shell::ExecuteModule check for the
existence of the module before calling into Shell::ExecuteModule, the
same way that Shell::DoHostImportModuleDynamically does.
Bug: v8:12530
Change-Id: Ia038cbd1715e85c9c92c4554fd486c657ef952e8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3388130
Reviewed-by: Marja Hölttä <marja@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78636}
Similar to the case of fixed registers, we need to consider both cases:
A SIMD register might collide with either the low or high FP register,
or the FP register might collide with a previously allocated SIMD
register. We did only consider the first case so far.
R=thibaudm@chromium.org
Bug: chromium:1286253, v8:12330
Change-Id: Id4c995586cc8b97a2e131ee9d3417525e409bcef
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3380597
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78633}
This is a reland of 142dd775b4
Original change's description:
> cppgc-js,heap: Implement snapshots for embedder fields
>
> https://crrev.com/c/3293410 added concurrent processing of C++ objects
> found through V8 embedder fields. The CL missed that those embedder
> fields are not read atomically from JS objects. The problem is that
> embedder fields are only aligned to kTaggedSize on builds with pointer
> compression and are as such mis-aligned for atomic ops. This is not a
> problem for on-heap values as the upper 32bits are anyways computed
> from the cage. Is is a problem for generic C++ values though, as they
> are used with Oilpan.
>
> This CL adds the standard marker snapshot protocol for embedder fields.
>
> Marker:
> 1. Snapshot embedder fields
> 2. Try to mark host object
> 3. On success: process snapshot
>
> Main thread:
> 1. On setting embedder fields mark the object black first
> 2. Emit a write barrier for the embedder fields
>
> This will get simpler with the heap sandbox that uses a separate table
> for embedder fields. Once the sandbox is the default configuration, we
> can use it as dependency for the concurrent fast path.
>
> Bug: chromium:1285706
> Change-Id: I6b975ea561be08cda840ef0dd27a11627de93900
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3380983
> Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
> Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78604}
Bug: chromium:1285706
Change-Id: I024e50fc0757fbcd13cb9ffde027dff55f99d25c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3386600
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Omer Katz <omerkatz@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78631}
- Add suspend asm builtin stub, and call it from the suspending
wasm-to-js wrapper
- Rename frame type to match both builtins (prompt and suspend)
- Add suspend bool to the import cache key
R=ahaas@chromium.org
CC=fgm@chromium.org
Bug: v8:12191
Change-Id: Ie5a8ca7cbe4bcb91697e05b6470e3d632d608993
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3345004
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78628}
Since ManualGCScope changes marking flags it should finalize any
ongoing GC before changing the flags. Otherwise, the GC may observe
inconsistent state.
Bug: chromium:1285706
Change-Id: Ie8ef6a1117ba0523d0bed0c46d9116ffbc02069c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3386607
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Auto-Submit: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78618}
When FLAG_shared_string_table is true, postMessaging strings will share
instead of copy.
Note that not all operations on shared strings are supported, and shared
strings may be slower than non-shared strings for some operations.
Bug: v8:12007
Change-Id: I3462128e15410d2568868143571571b3025722c1
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3277250
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78614}
This reverts commit 142dd775b4.
Reason for revert: TSAN breaks: https://ci.chromium.org/ui/p/v8/builders/ci/V8%20Linux64%20TSAN%20-%20stress-incremental-marking/6113/overview
Original change's description:
> cppgc-js,heap: Implement snapshots for embedder fields
>
> https://crrev.com/c/3293410 added concurrent processing of C++ objects
> found through V8 embedder fields. The CL missed that those embedder
> fields are not read atomically from JS objects. The problem is that
> embedder fields are only aligned to kTaggedSize on builds with pointer
> compression and are as such mis-aligned for atomic ops. This is not a
> problem for on-heap values as the upper 32bits are anyways computed
> from the cage. Is is a problem for generic C++ values though, as they
> are used with Oilpan.
>
> This CL adds the standard marker snapshot protocol for embedder fields.
>
> Marker:
> 1. Snapshot embedder fields
> 2. Try to mark host object
> 3. On success: process snapshot
>
> Main thread:
> 1. On setting embedder fields mark the object black first
> 2. Emit a write barrier for the embedder fields
>
> This will get simpler with the heap sandbox that uses a separate table
> for embedder fields. Once the sandbox is the default configuration, we
> can use it as dependency for the concurrent fast path.
>
> Bug: chromium:1285706
> Change-Id: I6b975ea561be08cda840ef0dd27a11627de93900
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3380983
> Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
> Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78604}
Bug: chromium:1285706
Change-Id: If1976c0356f450fc068aa4dcc39fb9a0d5417a40
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3386598
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Owners-Override: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Cr-Commit-Position: refs/heads/main@{#78605}
https://crrev.com/c/3293410 added concurrent processing of C++ objects
found through V8 embedder fields. The CL missed that those embedder
fields are not read atomically from JS objects. The problem is that
embedder fields are only aligned to kTaggedSize on builds with pointer
compression and are as such mis-aligned for atomic ops. This is not a
problem for on-heap values as the upper 32bits are anyways computed
from the cage. Is is a problem for generic C++ values though, as they
are used with Oilpan.
This CL adds the standard marker snapshot protocol for embedder fields.
Marker:
1. Snapshot embedder fields
2. Try to mark host object
3. On success: process snapshot
Main thread:
1. On setting embedder fields mark the object black first
2. Emit a write barrier for the embedder fields
This will get simpler with the heap sandbox that uses a separate table
for embedder fields. Once the sandbox is the default configuration, we
can use it as dependency for the concurrent fast path.
Bug: chromium:1285706
Change-Id: I6b975ea561be08cda840ef0dd27a11627de93900
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3380983
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78604}
This CL fixes 2 issues with string internalization when the string table
is shared:
1. In-place migration of a string's map to Internalized was done before
it was sure that the string is going to be internalized (outside the
critical section). To fix this problem StringTableKey::AsHandle() is
now split into StringTableKey::PrepareForInsertion(), which is
invoked outside the critical section and creates a copy if
necessary, and StringTableKey::GetHandleForInsertion(), which is
invoked inside the critical section only for string table misses.
Migration of the map is handled by this method.
2. TryStringToIndexOrLookupExisting() didn't handle already internalized
strings. So far this was impossible, as this method was only invoked
for strings that were checked not to be internalized. However with
a shared string table, the string could be internalized after the
checks.
Bug: v8:12007
Change-Id: I193d6b54dc41360eee47d21cbcaa36d2652d85dd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3368103
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78600}
This unifies and simplifies the way we instrument async functions for
the purpose of async stack traces and async stepping. It does so while
retaining the observable behavior on the inspector level (for now).
Previously we'd mark the implicit promise of the async function object
with the async task ID, and whenever we awaited, we'd copy the async
task ID to the throwaway promise that is created by the `await`. This
however made things unnecessarily interesting in the following regards:
1. We'd see `DebugDidHandle` and `DebugWillHandle` events after the
`AsyncFunctionFinished` events, coming from the throwaway promises,
while the implicit promise is "done". This is especially confusing
with rejection propagation and requires very complex stepping logic
for async functions (after this CL it'll be possible to unify and
simplify the stepping logic).
2. We have to thread through the "can suspend" information from the
Parser all the way through AsyncFunctionReject/AsyncFunctionResolve
to the async function instrumentation to decide whether to cancel the
pending task when the async function finishes.
This CL changes the instrumentation to only happen (non recurringly) for
the throwaway promises allocated upon `await`. This solves both problems
mentioned above, and works because upon the first `await` the stack
captured for the throwaway promise will include the synchronous part as
expected, while upon later `await`s the synchronous part will be empty
and the asynchronous part will be the stack captured for the previous
throwaway promise (and the V8Debugger automatically short circuits
stacks with empty synchronous part).
Bug: chromium:1280519, chromium:1277451, chromium:1246867
Change-Id: Id604dabc19ea133ea2e9dd63181b1fc33ccb5eda
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3383775
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Simon Zünd <szuend@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78599}
CompleteInobjectSlackTracking potentially shrinks multiple maps, and
the relation between these maps should be preserved in a concurrent
environment. Thus it is not enough to make each modification
atomically, but all related map modifications must be within a
critical section.
We do this by locking the map_updater_access mutex
CompleteInobjectSlackTracking, and hence moving the function to the
MapUpdater class.
Bug: chromium:1274445,v8:7990
Change-Id: If99bb8b55e03180128ee397d845fa4c269c4241e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3379819
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78597}
The last update (using tools/wasm/update-wasm-fuzzers.sh) was in
November 2020, thus update again to add modules from all existing tests
to the corpus used by ClusterFuzz.
This increases the number of files in the corpus from 47196 to 53779.
R=ahaas@chromium.org
Change-Id: Ie293bda0b4d5d7c34d5b7c53d8115d9d3883f1db
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3379813
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78590}
CDP has a "ExceptionDetails" structure that is attached to various
CDP commands, e.g. "Runtime#exceptionThrown" or "Runtime#evaluate".
The stack trace in the "ExceptionDetails" structure is used in
various places in DevTools. The information in the "ExceptionDetails"
structure is extracted from a v8::Message object. Message objects
are normally created at the exception throw site and may augment
the error with manually inspecting the stack (both to capture a fresh
stack trace in some cases, as well as to calculate location info).
The problem is that in some cases we want to get an "ExceptionDetails"
structure after the fact, e.g. when logging a JS "Error" object in
a catch block. This means we can't reuse Isolate::CreateMessage as
the JS stack at call time is unrelated to the time when an Error
object was thrown.
To re-use some of the code, this CL introduces a new
"CreateMessageFromException" method that is only available from the
debugging interface (not public V8 API!). The new method works
similar to Isolate::CreateMessage, but:
1) Does not look at the current JS stack, neither for a fresh
stack trace nor for location information.
2) Only uses the "detailed" stack trace for location info.
This is because the "simple" stack trace could have already
been serialized by accessing Error#stack.
Bug: chromium:1278650
Doc: https://bit.ly/runtime-get-exception-details
Change-Id: I0144516001c71786b9f76ae4dec4442fa1468c5b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3337257
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78586}
This is a reland of 86038ecfdc
Compared to the previous CL this one is adding a TSAN suppression
for GlobalSafepoint::EnterSafepointScope. local_heaps_mutex_ of client
isolates may be locked in any order. This would be detected by TSAN as a
potential race. Add some additional DCHECKs to compensate for that
missing test coverage.
As a cleanup this CL also removes the unused methods ContainsLocalHeap()
and ContainsAnyLocalHeap() from LocalHeap.
Original change's description:
> [heap] Optimize time to reach global safepoint
>
> Initial support for global safepoints kept it simple by entering a
> safepoint for each of them one after another. This means
> time-to-global-safepoint is the sum of all time-to-safepoint operations.
> We can improve this slightly by splitting up the safepoint iteration
> into two operations:
>
> 1) Initiate safepoint lock (locks local_heaps_mutex_, arms the barrier
> and sets SafepointRequested flag for all client threads)
> 2) Block until all runnning client threads reach a safepoint
>
> We now perform operation 1) for all clients first and only then start
> with operation 2).
>
> Bug: v8:11708
> Change-Id: Iaafd3c6d70bcf7026f722633e9250b04148b3da6
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3310910
> Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78308}
Bug: v8:11708, v8:12492
Change-Id: I7087ba23c08f2d4edb9b632eef3c218fc76342e7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3328786
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78583}
This CL doesn't change behavior, only refactors MemoryAllocator:
* De-templatify class, MemoryAllocator is used on slow path and doesn't
really need templates for performance.
* Rename FreeMode names
* Move methods into private section of class
Change-Id: I7894fba956dcd7aa78ad0284d0924662fef4acae
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3379812
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78580}
We introduce {ConstantExpression}, which represents the most frequent
constant expression types directly, and falls back to a {WireBytesRef}
for the rest. During module decoding, we decode the most common
expressions separately and store them as {ConstantExpression}, so we do
not have to decode them again during module instantiation.
Bug: chromium:1284557
Change-Id: Ie411bbe9811d0d9f6e750ba202bb0ccff801dfee
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3378347
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78576}
It is possible for KeyedDefineOwnICKind to go into
ElementsTransitionAndStoreIC_Miss when a computed field key
is a valid index and the lazy feedback allocation is disabled.
Bug: chromium:1277863
Change-Id: If8a81384257647426607495b6e3d8f235913e8f3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3322634
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Cr-Commit-Position: refs/heads/main@{#78573}
This is a temporary solution so prototyping of shared structs and shared
strings can be worked on in parallel.
Bug: v8:12007
Change-Id: Ic849ec66da1d3824d50d695f16e4b77380afa015
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3379222
Reviewed-by: Patrick Thier <pthier@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78570}
V8 crashed with a FATAL when memory allocation during instantiation
failed. With this CL, a RangeError is thrown instead.
This is not the only possible OOM that can happen during the startup of
a WebAssembly app, but since the allocation of WebAssembly memory is
among the biggest allocations, this change may already prevent several
crashes.
R=clemensb@chromium.org
Bug: chromium:1268898
Change-Id: I9376830ba2fe9df62b5595b6b19c92e35a75dfda
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3380586
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78569}
We introduce a type arrayref, which is a supertype of all array types
and a subtype of dataref. We change array.len to accept values of type
(ref null array).
Drive-by: Fix kEq/kData case in TypecheckJSObject.
Bug: v8:7748
Change-Id: I47c6a4487ddf5e7280c1427f43abe87a97c896bd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3368105
Reviewed-by: Simon Zünd <szuend@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78565}
The original CL introduced a test that does not work when it is executed
concurrently on multiple isolates. This CL skips this test
configuration.
Original change's description:
> [wasm] Lazy compilation after deserialization
>
> The serialization format contains one boolean flag per function which
> specifies whether the function code exists in the serialized module or
> not. With this CL, this boolean flag is extended to a three-value flag
> which indicates whether the function exists, and if not, whether the
> function was executed before serialization. This information can then be
> used upon deserialization to compile only those functions that were
> executed before serialization.
>
> Design doc: https://docs.google.com/document/d/1U3uqq4njqLqFhr1G2sU_bmpQxY-3bvfG55udSb-DvA4/edit?usp=sharing
>
> Bug: v8:12281
Change-Id: I36ce90b37736172aa01c47ab04e154ec8ea2d8aa
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3380590
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78564}
- Add Suspender.suspendOnReturnedPromise method
- Extend the WasmApiFunctionRef data with the suspender
- Detect wrapped WasmJSFunctions when we resolve the import
For now the generated wrapper is still a regular wasm-to-js wrapper, but
this sets the ground for generating specific wrappers for functions
wrapped by suspendOnReturnedPromise, and to access the suspender from
the wrapper code.
R=ahaas@chromium.org
CC=fgm@chromium.org
Bug: v8:12191
Change-Id: I81cbec6b023507e47e6e1463b5f9b912f807da6a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3345000
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78560}
This reverts commit fbcdb28178.
Reason for revert: New test fails for multiple (concurrent) isolates: https://ci.chromium.org/ui/p/v8/builders/ci/V8%20Linux/45152/overview
Original change's description:
> [wasm] Lazy compilation after deserialization
>
> The serialization format contains one boolean flag per function which
> specifies whether the function code exists in the serialized module or
> not. With this CL, this boolean flag is extended to a three-value flag
> which indicates whether the function exists, and if not, whether the
> function was executed before serialization. This information can then be
> used upon deserialization to compile only those functions that were
> executed before serialization.
>
> Design doc: https://docs.google.com/document/d/1U3uqq4njqLqFhr1G2sU_bmpQxY-3bvfG55udSb-DvA4/edit?usp=sharing
>
> Bug: v8:12281
> Change-Id: I465e31e5422fa45163256be0e6594045865f0174
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364089
> Reviewed-by: Clemens Backes <clemensb@chromium.org>
> Commit-Queue: Andreas Haas <ahaas@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78545}
Bug: v8:12281
Change-Id: If0e327d02e8257a4d1cfcf8b82381af11f28e91c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3377126
Auto-Submit: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Cr-Commit-Position: refs/heads/main@{#78546}
The serialization format contains one boolean flag per function which
specifies whether the function code exists in the serialized module or
not. With this CL, this boolean flag is extended to a three-value flag
which indicates whether the function exists, and if not, whether the
function was executed before serialization. This information can then be
used upon deserialization to compile only those functions that were
executed before serialization.
Design doc: https://docs.google.com/document/d/1U3uqq4njqLqFhr1G2sU_bmpQxY-3bvfG55udSb-DvA4/edit?usp=sharing
Bug: v8:12281
Change-Id: I465e31e5422fa45163256be0e6594045865f0174
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364089
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78545}
When creating a new JSError object (or using the non-standard API
`Error.captureStackTrace`) V8 would previously capture the "simple stack
trace" (as FixedArray of CallSiteInfo instances) to be used for the non-
standard `error.stack` property, and if the inspector was active also
capture the "detailed stack trace" (as FixedArray of StackFrameInfo
instances). This turns out to be quite a lot of overhead, both in terms
of execution time as well as memory pressure, especially since the
information needed for the inspector is a proper subset of the
information needed by `error.stack`.
So this CL addresses the above issue by capturing only the "simple stack
trace" (in the common case) and computing the "detailed stack trace"
from the "simple stack trace" when on demand. This is accomplished by
introducing a new ErrorStackData container that is used to store the
stack trace information on JSErrors when the inspector is active. When
capturing stack trace for a JSError object while the inspector is
active, we take the maximum of the program controlled stack trace limit
and the inspector requested stack trace limit, and memorize the program
controlled stack trace limit for later formatting (to ensure that the
presence of the inspector is not observable by the program).
On the `standalone.js` benchmark from crbug.com/1283162 (with the
default max call stack size of 200) we reduce execution time by around
16% compared to ToT. And compared to V8 9.9.4 (the version prior to the
regression in crbug.com/1280831), we are 6% faster now.
Doc: https://bit.ly/v8-cheaper-inspector-stack-traces
Bug: chromium:1280831, chromium:1278650, chromium:1258599
Bug: chromium:1280803, chromium:1280832, chromium:1280818
Fixed: chromium:1283162
Change-Id: I57dac73e0ecf7d50ea57c3eb4981067deb28133e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3366660
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78542}
We should only check the "SIMD sibling" register if we are handling a
SIMD register. This avoids unneeded spills, and in this particular case
ran into a DCHECK because there are only 29 registers, but we tried
checking #29.
R=thibaudm@chromium.org
Bug: v8:12330, v8:1285007
Change-Id: Ife8b295ac958990611ca8816bbfbfb5124a4297d
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3372916
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78532}
This should have been updated in https://crrev.com/c/3370408
Bug: chromium:1284506
Change-Id: Ie44d80b507c9a798ce6f4776672270f9d4b12195
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3371463
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Commit-Queue: Austin Sullivan <asully@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78519}
The test was added in https://crrev.com/c/3372910, but needs to be
skipped on non-SIMD hardware because it contains SIMD instructions.
R=thibaudm@chromium.org
Bug: v8:12330, chromium:1284980
Change-Id: Ifaede466b24aea4f9ef6b062414a31698bcca864
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3372917
Auto-Submit: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78517}
Spilling was already fixed if a fixed SIMD register overlaps with an
allocated FP register, but the other way around was missing: If an odd
FP register (in this case d1) is used as a fixed output register, but
this register is in use as the upper half of a SIMD register (in this
case q0), we did not detect this and would just use overwrite the SIMD
half.
This CL also fixes this case.
R=thibaudm@chromium.org
Bug: v8:12330, chromium:1284980
Change-Id: Id3f98b7accd77e38ab4cd5ff8910aaf5ad96a1ed
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3372910
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78514}
https://crrev.com/c/3297708 changed the serialization format for typed
arrays without bumping the format version. As a consequence, builds that
include that CL fail to deserialize typed arrays serialized by previous
V8 versions.
This CL reverts the serialization format change, and does minimal test
changes to reflect the revert. https://crbug.com/v8/12532 tracks
serializing typed array flags in a backwards-compatible manner.
Bug: chromium:1284506
Change-Id: Ib32e88c6383e0ad4ad1a9ff63f413a1eb123b1ef
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3370408
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Commit-Queue: Victor Costan <pwnall@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78507}
We implement loop peeling for wasm, currently available behind a flag.
Loops are peeled regardless of size.
Bug: v8:11510
Change-Id: Ia4c883abdee83df632b2611584d608c44e3295c8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3367615
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78496}
The V8InspectorSessionImpl constructor accepts a state, as either text
or CBOR encoded, and generally ignores all invalid inputs, except for
the case where it's a valid value, but not a dictionary value, in which
case it'll leak the value and crash upon casting to a `DictionaryValue`.
This is purely an issue with the test driver, so no security impact on
Chromium in the wild.
Fixed: chromium:1281031
Change-Id: I7b4d0aea83370499b1274d3fa214a14dc098d2f2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3361838
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78490}
If a fixed register is defined for an input, we did only spill the
sibling SIMD register if the other sibling was allocated. This is not
correct. If only the sibling is in use (e.g. s1 colliding with q0) we
also have to spill that sibling.
R=mslekova@chromium.org
Bug: chromium:1283042, v8:12330
Change-Id: I6a22eaf461774a0b4603ec3ff17062134a528161
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3359615
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78483}
The mid-tier register allocator did not handle block merges correctly
where a SIMD register was partially overlapping with a non-SIMD
register. This CL fixes that, and reorders the code to allow for early
exits.
R=mslekova@chromium.org
Bug: chromium:1282224, v8:12330
Change-Id: I2e9275d5c1aaa764ecb63fbf8fa197b68d6b6c3c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3358294
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78482}
This change fixes the implementation of the previously introduced API
`Runtime.setMaxCallStackSizeToCapture` to work correctly and also apply
(consistently) to stack traces captured by V8 when exceptions are
thrown. It does so in a fully backwards compatible manner.
This change thus makes the previous fix for catapult (which landed in
http://crrev.com/c/3347789) effective, and therefore ensures that real
world performance benchmarks aren't affected by the use of the `Runtime`
domain in the catapult test framework.
Note this is basically a reland of crrev.com/c/3361839, but without
touching the stack traces for console messages (which led to the
regressions in crbug/1283516, crbug/1283523, etc.).
Fixed: chromium:1280831
Bug: chromium:1283162, chromium:1278650, chromium:1258599
Bug: chromium:1280803, chromium:1280832, chromium:1280818
Doc: https://bit.ly/v8-cheaper-inspector-stack-traces
Change-Id: I3dcec7b75d76ca267fac8bd6fcb2cda60d5e60dd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364086
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78479}
We unify the implementation of element segment expression entries with
other initializer expressions: we represent them with a {WireBytesRef}
and decode them with {InitExprInterface}. Except for reducing code
duplication, this also fixes a bug where {global.get} entries in element
segments could reference invalid globals.
Changes:
- Change {WasmElemSegment::Entry} to a union of a {WireBytesRef}
initializer expression and a {uint32_t} function index.
- In module-decoder, change parsing of expression entries to use
{consume_init_expr}. Add type checking to
{consume_element_func_index}, to complement type checking happening in
{consume_init_expr}.
- In module-instantiate.cc:
- Move instantiation of indirect tables before loading of element
segments. This way, when we call {UpdateDispatchTables} in
{SetTableEntry}, the indirect table for the current table will also
be updated.
- Consolidate table entry instantiation into {SetTableEntry}, which
handles lazily instantiated functions, or dispatches to
{WasmTableObject::Set}.
- Rename {InitializeIndirectFunctionTables} to
{InitializeNonDefaultableTables}.
- Change {InitializeNonDefaultableTables} and {LoadElemSegmentImpl}
to use {EvaluateInitExpression}.
- Add a test to exclude mutable/non-imported globals from the element
section.
- Update tests as needed.
- Update .js module emission in wasm-fuzzer-common.
Change-Id: I29c541bbca8531e8d0312ed95869c8e78a5a0c57
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364082
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78476}
See related CL for context.
Changes:
- In InitExprInterface, add the ability to evaluate function references
as index only. Remove the global buffers and use the ones passed with
the instance object instead.
- In WasmElemSegment, add a field indicating if elements should be
parsed as expressions or indices. Change module-decoder.cc to reflect
this change.
- In module-instantiate, change the signatures of LoadElemSegment,
LoadElemSegmentImpl, and EvaluateInitExpr. Move the latter out of
InstanceBuilder.
Change-Id: I1df54393b2005fba49380654bdd40429bd4869dd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364081
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78470}
This reverts commit 34f73cc759.
Reason for revert: Performance regressions throughout a lot of
system health and browsing benchmarks.
Original change's description:
> [inspector] Fix `Runtime.setMaxCallStackSizeToCapture`.
>
> This change fixes the implementation of the previously introduced API
> `Runtime.setMaxCallStackSizeToCapture` to work correctly and also apply
> (consistently) to stack traces captured by V8 when exceptions are
> thrown. It does so in a fully backwards compatible manner.
>
> This change thus makes the previous fix for catapult (which landed in
> http://crrev.com/c/3347789) effective, and therefore ensures that real
> world performance benchmarks aren't affected by the use of the `Runtime`
> domain in the catapult test framework.
>
> Bug: chromium:1283162, chromium:1278650, chromium:1258599
> Bug: chromium:1280803, chromium:1280832, chromium:1280818
> Fixed: chromium:1280831
> Doc: https://bit.ly/v8-cheaper-inspector-stack-traces
> Change-Id: I4ec951a858317fa49096cd4023deb0104d92c9c9
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3361839
> Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
> Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
> Reviewed-by: Yang Guo <yangguo@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78458}
Bug: chromium:1283162, chromium:1278650, chromium:1258599
Bug: chromium:1280803, chromium:1280832, chromium:1280818
Bug: chromium:1280831
Change-Id: Id1efaffa2f7f08c47f833f68b8a297494edee21e
Fixed: chromium:1283751, chromium:1283749, chromium:1283746
Fixed: chromium:1283729, chromium:1283700, chromium:1283700
Fixed: chromium:1283691, chromium:1283687, chromium:1283678
Fixed: chromium:1283677, chromium:1283676, chromium:1283675
Fixed: chromium:1283674, chromium:1283618, chromium:1283536
Fixed: chromium:1283523, chromium:1283516
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3364078
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78462}
This change fixes the implementation of the previously introduced API
`Runtime.setMaxCallStackSizeToCapture` to work correctly and also apply
(consistently) to stack traces captured by V8 when exceptions are
thrown. It does so in a fully backwards compatible manner.
This change thus makes the previous fix for catapult (which landed in
http://crrev.com/c/3347789) effective, and therefore ensures that real
world performance benchmarks aren't affected by the use of the `Runtime`
domain in the catapult test framework.
Bug: chromium:1283162, chromium:1278650, chromium:1258599
Bug: chromium:1280803, chromium:1280832, chromium:1280818
Fixed: chromium:1280831
Doc: https://bit.ly/v8-cheaper-inspector-stack-traces
Change-Id: I4ec951a858317fa49096cd4023deb0104d92c9c9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3361839
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78458}
Previously the `Debugger.CallFrame`s in `Debugger.paused` events would
report locations relative to the surrounding document in case of inline
scripts with `//@ sourceURL` annotations (while `Runtime.CallFrame` was
already fixed previously as part of crrev.com/c/3069289). With this CL
the locations in `Debugger.CallFrame` are also appropriately adjusted.
Drive-by-fix: Several inspector tests were (incorrectly) relying on this
wrong treatment, and were also unnecessarily using //# sourceURL
annotations. So part of this CL also addresses that problem and makes
the tests more robust, using addInlineScript() helper.
Fixed: chromium:1283049
Bug: chromium:1183990, chromium:578269
Change-Id: I6e3b215d951c3453c0a9cfc9bccf3dc3d5e92fd6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3359619
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Yang Guo <yangguo@chromium.org>
Commit-Queue: Yang Guo <yangguo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78450}
Included in this CL:
(*) Introduce CppMarkingState that V8 should use to push references to
Oilpan. CppMarkingState allocates its own Worklist::Locals to
support concurrent updates from V8.
(*) Split Oilpan MarkingWorklist object to form a base class used by
CppMarkingState.
(*) Remove MarkerFactory and split marking initialization. Marking
worklists should already be initialized when V8 initializes
visitors. For incremental marking, this requires splitting
marking initialization and marking start.
(*) Drive-by: Mark JSObject::IsApiWrapper and
JSObject::IsDroppableApiWrapper as const.
Bug: v8:12407
Change-Id: I35cc816343da86f69a68306204675720e9b3913f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3293410
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78446}
This CL splits the TF type for JSFunction into CallableFunction and
ClassConstructor. This differentiation allows us to lower calls to the
CallFunction Builtin only for functions that we can actually call.
Class Constructors are special, as they are callable but should raise
an exception if called.
By not lowering class constructors to calls to CallFunction (but the
more generall Call) builtin, we can remove the checks for class
constructors from CallFunction (in a follow-up CL).
Bug: chromium:1262750
Change-Id: I399967eb03b2f20d2dcb67aef2243b32c9d3174e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3350457
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78445}
Wasm values are stored in memory in little endian order even
on BE machines and as a result they need to be manually reversed
after a load.
Other such atomic ops get patched during Wasm compilation or
during code-gen, this is one of the few places where a runtime call is
made to C++ which requires this fix.
As the the runtime stub is used on both TurboFan and Liftoff this
patch will fix both cases.
Up until now the cctest was passing incorrectly as it's mixing the
Wasm memory buffer with TypedArrays. TypedArrays don't have the
LE enforcement and use the native byte order.
With this patch the test is now failing as expected
and is being skipped for now.
Bug: v8:12505
Change-Id: I49fac208f1fab7396b7d9911e803bc047b3b8263
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3350744
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Milad Farazmand <mfarazma@redhat.com>
Cr-Commit-Position: refs/heads/main@{#78433}
This updates the following set of console builtins in V8 to match the
Console Standard (https://console.spec.whatwg.org) with respect to
(potentially side effecting) type conversions:
- console.debug
- console.error
- console.info
- console.log
- console.trace
- console.warn
- console.group
- console.groupCollapsed
- console.assert
The V8 implementation only performs the type conversions and updates
the arguments in-place with the results from the %String% constructor,
%parseInt%, or %parseFloat% invocations. The actual formatting is
still left completely to the debugger front-end.
To give a concrete example, the following code
```js
const msgFmt = {
toString() { return 'Message %i' }
};
console.log('LOG: %s`, msgFmt, 42);
```
sends the following parameters to the debugger front-end
```js
["LOG: %s", "Message %i", 42]
```
and it's then the job of the front-end to perform the actual string
substitutions.
It's also worth calling out that the console builtins are only
concerned with %s, %f, %d, and %i formatting specifiers, since
these are the only ones that trigger type conversions, and %o, %O,
and %c can only be implemented in a meaningful way at a higher
level.
Fixed: chromium:1277944
Bug: chromium:1282076
Doc: https://bit.ly/v8-proper-console-type-conversions
Spec: https://console.spec.whatwg.org
Change-Id: I0996680811aa96236bd0d879e4a11101629ef1a7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3352118
Reviewed-by: Kim-Anh Tran <kimanh@chromium.org>
Auto-Submit: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78432}
Private method loads are compiled to a named load of a private brand,
which always loads a BlockContext. This BlockContext holds the private
methods common to all instances of a class. TurboFan currently considers
JSLoadNamed to be of Type::NonInternal(). Private methods break this
assumption, since BlockContext is of Type::OtherInternal().
This CL changes the typing of JSLoadNamed of private brands to be
Type::OtherInternal().
Bug: v8:12500
Change-Id: I91f39747bf9422bd419d299f44152f567d8be8db
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3351167
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78431}
This commit allows using unaligned load/store, which is more efficient
for 2 bytes,4 bytes and 8 bytes memory access.
Use RISCV_HAS_NO_UNALIGNED to control whether enable the fast path or not.
Change-Id: I1d321e6e5fa5bc31541c8dbfe582881d80743483
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3329803
Reviewed-by: ji qiu <qiuji@iscas.ac.cn>
Commit-Queue: Yahan Lu <yahan@iscas.ac.cn>
Cr-Commit-Position: refs/heads/main@{#78427}
Shared array buffers are not tracked by the garbage collector, which
makes the fuzzer run out of memory pretty quickly. Since shared memory
is not needed any more for testing atomics, we can just make the memory
non-shared again.
This also improves the performance of the fuzzer (execs/s) by more than
2x locally.
R=ahaas@chromium.org
Bug: chromium:1281419
Change-Id: Ic7803617d6a14aaa698d9181327ec20b21d29faa
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3350764
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78418}
Without simple FP aliasing, a SIMD register will overlap with two
floating-point registers. If we spill an FP register to use it for a
SIMD operation, we need to make sure to also spill the "sibling" FP
register.
R=leszeks@chromium.org
Bug: v8:12330, chromium:1271244
Change-Id: I7fdc6cb8da35d66b4862a8a913ba4ff906cf05aa
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3347576
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78414}
Initialize the (thread-local) memory protection key permissions for any
isolate that joins the wasm engine. Otherwise it can happen that an
isolate gets Wasm code from the cache without ever compiling anything
(hence without ever changing memory protection key permissions), and
then it would not be allowed to access (read or execute) the code.
I tested this change manually on a PKU-enabled devices. The new test
crashed before the fix, and completes successfully afterwards.
R=ahaas@chromium.org
Bug: v8:11974, chromium:1280451
Change-Id: I90dded8b4fdaa8cf34b44107291d3f525ce16335
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3347563
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78413}
After https://crrev.com/c/3315446 we allocate the memory protection key
unconditionally, so the method is redundant.
R=ahaas@chromium.org
Bug: v8:11974
Change-Id: I205a0cda86dfaf394c68788a662241d76a3f8510
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3347562
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78412}
The mid-tier register allocator could not handle the case that the same
virtual register was used for
- the input corresponding to the 'same-as-input' output, and
- another 'unique register' input.
In this case, it cannot choose the already assigned register for the
'unique' register. Instead, it needs to allocate a new register and
introduce a gap move to duplicate the input value in two different
registers.
FYI, the instruction where the current logic failed was:
(v5(0), v6(R)) = IA32AddPair v7(R) v7(*) v8(R) v7(R)
(where the last input was marked 'unique').
R=leszeks@chromium.orgCC=thibaudm@chromium.org
Bug: v8:12330, chromium:1272204
Change-Id: Ie4843aa9f5e027afe503e0481a4acdfa325dfe0e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3347821
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78411}
A SIMD register can "block" more than one FP register. In that case, no
virtual register will be assigned for one of the FP registers. This is
fine, we just need to detect and handle that case correctly.
R=thibaudm@chromium.org
CC=leszeks@chromium.org
Bug: chromium:1271538, v8:12330
Change-Id: I7ec19229445c5ace0782f63945acb89322816540
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3293082
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78400}
We switch the order of inlining and loop unrolling optimizations. This
gives small improvements to wasm-gc benchmarks.
Changes:
- Change the loop analysis algorithm to accept loops directly connected
to the graph's end. This is required because some nodes in an inlined
function, such as tail calls, might be directly connected to the outer
function's end without an intervening LoopExit node.
- Based on the above, skip emitting loop exits for some Throw nodes in
WasmGraphBuildingInterface.
- Introduce WasmInliningPhase, add it before loop unrolling. Remove
inlining from WasmOptimizationPhase.
- Handle graph terminators in loop unrolling.
- Add loops in the inlined function to the callers loop_infos.
Drive-by:
- Allow more wasm builtins in unrolled loops.
- Reduce inlining parameters to reflect that functions are now slightly
smaller during inlining, as no unrolling has taken place yet.
Bug: v8:12166
Change-Id: Iadd6b2f75170aa153ca1efb47fbb0d185c2b8371
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3329783
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78394}
... in order to avoid Code <-> CodeT conversions in builtins.
This CL changes the meaning of RelocInfo::CODE_TARGET which now expects
CodeT objects as a code target.
In order to reduce code churn this CL makes BUILTIN_CODE and friends
return CodeT instead of Code. In the follow-up CLs BUILTIN_CODET and
friends will be removed.
Bug: v8:11880
Change-Id: Ib8f60973e55c60fc62ba84707471da388f8201b4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3338483
Reviewed-by: Patrick Thier <pthier@chromium.org>
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78393}
When compiled with gn argument 'is_debug=false' these tests fail on
Windows due to the fact that they're compiled with '/guard:cf'.
This CL changes the use of FUNCTION_CAST to GeneratedCode::Call which
contains DISABLE_CFI_ICALL attribute. This is analogous to how
assembled functions are called in Assembler tests for other
architectures.
Change-Id: I330e29a508ad1421cb98dea3d9761f05272ab763
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3341511
Auto-Submit: Dmitrii Tsykunov <dtsykunov1@yandex-team.ru>
Reviewed-by: Victor Gomes <victorgomes@chromium.org>
Commit-Queue: Victor Gomes <victorgomes@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78386}
This CL renames a number of things related to the V8 sandbox.
Mainly, what used to be under V8_HEAP_SANDBOX is now under
V8_SANDBOXED_EXTERNAL_POINTERS, while the previous V8 VirtualMemoryCage
is now simply the V8 Sandbox:
V8_VIRTUAL_MEMORY_CAGE => V8_SANDBOX
V8_HEAP_SANDBOX => V8_SANDBOXED_EXTERNAL_POINTERS
V8_CAGED_POINTERS => V8_SANDBOXED_POINTERS
V8VirtualMemoryCage => Sandbox
CagedPointer => SandboxedPointer
fake cage => partially reserved sandbox
src/security => src/sandbox
This naming scheme should simplify things: the sandbox is now the large
region of virtual address space inside which V8 mainly operates and
which should be considered untrusted. Mechanisms like sandboxed pointers
are then used to attempt to prevent escapes from the sandbox (i.e.
corruption of memory outside of it). Furthermore, the new naming scheme
avoids the confusion with the various other "cages" in V8, in
particular, the VirtualMemoryCage class, by dropping that name entirely.
Future sandbox features are developed under their own V8_SANDBOX_X flag,
and will, once final, be merged into V8_SANDBOX. Current future features
are sandboxed external pointers (using the external pointer table), and
sandboxed pointers (pointers guaranteed to point into the sandbox, e.g.
because they are encoded as offsets). This CL then also introduces a new
build flag, v8_enable_sandbox_future, which enables all future features.
Bug: v8:10391
Change-Id: I5174ea8f5ab40fb96a04af10853da735ad775c96
Cq-Include-Trybots: luci.v8.try:v8_linux64_heap_sandbox_dbg_ng,v8_linux_arm64_sim_heap_sandbox_dbg_ng
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3322981
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Samuel Groß <saelo@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78384}
An asm-js module has all wasm feature flags disabled, despite the global
flag configuration. Therefore, in WasmExportedFunction::New, we should
retrieve the enabled features from the NativeModule instead of the
flags.
Bug: chromium:1279151
Change-Id: Ic44fe535baa7cb851644457cce533c24d4c9824e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3338256
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78368}
This is a non-functional refactoring to make naming of stack traces more
consistent, and thus easier to reason about whether the "simple stack
trace" (stack trace API) or the "detailed stack trace" (inspector API)
is meant. Granted, these names aren't great by themselves, but at least
we should be consistent.
This also adds a new `Isolate::GetSimpleStackTrace()` and uses that
directly to implement the Wasm C-API, avoiding the roundtrip via the
`JSMessageObject`, which actually carries a detailed stack trace (which
by chance worked out so far).
Doc: https://bit.ly/v8-stack-frame
Bug: chromium:1258599, chromium:1278647, chromium:1278650
Change-Id: I29e1a956ed156d6eeceb50150a28afaa2f11b9c7
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3334780
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78366}
Use build_flags_ with @if/@ifnot in torque for the following flags:
- V8_ENABLE_JAVASCRIPT_PROMISE_HOOKS
- V8_ENABLE_SWISS_NAME_DICTIONARY
- Make sure Torque and CSA code actually respect
V8_ENABLE_JAVASCRIPT_PROMISE_HOOKS.
- Rename V8_ALLOW_JAVASCRIPT_IN_PROMISE_HOOKS to
V8_ENABLE_JAVASCRIPT_PROMISE_HOOKS
- Rename gn/bazel arg v8_allow_javascript_in_promise_hooks to
v8_enable_javascript_promise_hooks
- Unship context promise hooks in chrome and enable them only in d8
for testing purposes
- Make sure d8 and the API throw when using promise hooks without
the compile time feature enabled
Bug: chromium:1265186, v8:11025
Change-Id: I69834d44d683a36d0d7be3c3d68888321be0fd7f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3301474
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78362}
This is the second step in the refactoring to make v8::StackFrame
more lightweight and usable for (long time storage) by the V8
inspector (see https://bit.ly/v8-stack-frame for an overview).
This is a purely mechanical change without any functional aspects.
The intention is to make the use case for the CallSiteInfo objects
clear, namely to serve as the backing store for the CallSite objects
exposed via the Error.prepareStackTrace() API and used under the
hood to implement the error.stack accessor.
Doc: https://bit.ly/v8-stack-frame
Bug: chromium:1258599, chromium:1278647, chromium:1278650
Change-Id: I39dffd1f1a8e5158ddc56f2a0a2b1b28321f487a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3300138
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Simon Zünd <szuend@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78361}
Some embedders might want to process console.info and console.log
differently. So inspector needs to return a different level for
these console log messages.
Change-Id: I936990a25f079a0d72f877a5095ed93819fc539a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3331929
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Alexey Kozyatinskiy <kozyatinskiy@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78357}
Since the reftypes proposal has shipped, we remove the respective flag
and the code that handled its absence. We maintain a WasmFeature for
reftypes for feature detection purposes. We remove the flag declaration
from tests, and adapt some tests that make no sense without the flag.
Bug: v8:7581
Change-Id: Icf2f8d0feae8f30ec68d5560f1e7ee5959481483
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3329781
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78351}
This is a reland of 863bc2b88a
Diff to original:
- Don't eliminate GC observable stores that were temporarily
unobservable during traversal.
- Skip the previously added test for single-generation
- Add new test
Original change's description:
> [turbofan] Improve StoreStoreElimination
>
> Previously, StoreStoreElimination handled allocations as
> "can observe anything". This is pretty conservative and prohibits
> elimination of repeated double stores to the same field.
> With this CL allocations are changed to "observes initializing or
> transitioning stores".
> This way it is guaranteed that initializing stores to a freshly created
> object or stores that are part of a map transition are not eliminated
> before allocations (that can trigger GC), but allows elimination of
> non-initializing, non-transitioning, unobservable stores in the
> presence of allocations.
>
> Bug: v8:12200
> Change-Id: Ie1419696b9c8cb7c39aecf38d9f08102177b2c0f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3295449
> Commit-Queue: Patrick Thier <pthier@chromium.org>
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Reviewed-by: Maya Lekova <mslekova@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78230}
Bug: v8:12200, chromium:1276923, v8:12477
Change-Id: Ied45ee28ac12b370f7b232d2d338f93e10fea6b4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3320460
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78349}
With a recent addition to the type reflection proposal, 'anyfunc' gets
renamed to 'funcref'. For backwards compatibility, 'anyfunc' becomes an
alias for 'funcref'. With this CL, the string 'funcref' can be used to
create a funcref table or a funcref global. Additionally, 'funcref' is
returned as the type of imported and exported functions as well as
globals and tables.
R=manoskouk@chromium.org
Change-Id: If3ed4d507de862ebfcabd4eb967bbfaae1c6ccba
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3300135
Reviewed-by: Manos Koukoutos <manoskouk@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78341}
This allows us to reuse AstValueFactory's string table across multiple
parsers, while still releasing memory after each individual parse.
This is mild overkill for all the single parses that don't reuse
AstValueFactories, but there at least the AstRawStrings now end up
grouped together in memory, so that might have mild cache benefits.
Change-Id: I0b378760b601fa4ec6559a0dca5d7ed6f895e992
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3322764
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78338}
Rather than requiring the user of a LocalIsolate to pass in a
RuntimeCallStats from a WorkerThreadRuntimeCallStatsScope, create the
scope in the LocalIsolate directly and use its RuntimeCallStats in the
LocalIsolate constructor.
We can't do this for the main thread LocalIsolate, since
WorkerThreadRuntimeCallStatsScope doesn't work on the main thread, so
there we use the main-thread RuntimeCallStats instead.
This flushes out some issues of background-thread LocalIsolates being
used on the main thread, so fix those too, as well as RCS scopes using
background counters for operations that could happen on the main thread.
Change-Id: I21a53be0771f47a03ccdb27d24c2b9d25d8b2d1c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3318664
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78334}
Design doc: bit.ly/36MfD6Y
We introduce simplified operators LoadImmutableFromObject and
InitializeImmutableInObject. These are lowered to Loads and Stores like
LoadFromObject and StoreToObject.
We split CsaLoadElimination::AbstractState in two HalfStates,
which represent the mutable and immutable component of the state.
Immutable operators in the effect chain modify the immutable half-state,
and plain operators modify the mutable half-state. The immutable part is
maintained through write effects and loop headers. Immutable
initializations do not lookup and kill previous overlapping stores,
assuming each offset cannot be initialized more than once.
Bug: v8:11510
Change-Id: I0f5feca3354fdd3bdc1f511cc5214ec51e1407ad
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3268728
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78325}
This reverts commit 91f08378bc.
Reason for revert: It's a fairly big change, and the clusterfuzz
found some bugs. Will reland with the fix after M98 branch point.
Original change's description:
> [class] implement reparsing of class instance member initializers
>
> Previously, since the source code for the synthetic class instance
> member initializer function was recorded as the span from the first
> initializer to the last initializer, there was no way to reparse the
> class and recompile the initializer function. It was working for
> most use cases because the code for the initializer function was
> generated eagarly and it was usually alive as long as the class was
> alive, so the initializer wouldn't normally be lazily parsed. This
> didn't work, however, when the class was snapshotted with
> v8::SnapshotCreator::FunctionCodeHandling::kClear,
> becuase then we needed to recompile the initializer when the class
> was instantiated. This patch implements the reparsing so that
> these classes can work with FunctionCodeHandling::kClear.
>
> This patch refactors ParserBase::ParseClassLiteral() so that we can
> reuse it for both parsing the class body normally and reparsing it
> to collect initializers. When reparsing the synthetic initializer
> function, we rewind the scanner to the beginning of the class, and
> parse the class body to collect the initializers. During the
> reparsing, field initializers are parsed with the full parser while
> methods of the class are pre-parsed.
>
> A few notable changes:
>
> - Extended the source range of the initializer function to cover the
> entire class so that we can rewind the scanner to parse the class
> body to collect initializers (previously, it starts from the first
> field initializer and ends at the last initializer). This resulted
> some expectation changes in the debugger tests, though the
> initializers remain debuggable.
> - A temporary ClassScope is created during reparsing. After the class
> is reparsed, we use the information from the ScopeInfo to update
> the allocated indices of the variables in the ClassScope.
>
> Bug: v8:10704
> Change-Id: Ifb6431a1447d8844f2a548283d59158742fe9027
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2988830
> Reviewed-by: Leszek Swirski <leszeks@chromium.org>
> Reviewed-by: Toon Verwaest <verwaest@chromium.org>
> Commit-Queue: Joyee Cheung <joyee@igalia.com>
> Cr-Commit-Position: refs/heads/main@{#78299}
Bug: v8:10704
Change-Id: I039cb728ebf0ada438a8f26c7d2c2547dbe3bf2d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3325328
Auto-Submit: Joyee Cheung <joyee@igalia.com>
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78315}
Reduce the enqueuing cost of compiler-dispatcher jobs by getting rid of
the sets and hashmaps, and instead:
1. Turning the pending job set into a queue, and
2. Making the SharedFunctionInfo's UncompiledData hold a pointer to
the LazyCompilerDispatcher::Job, instead of maintaining an
IdentityMap from one to the other.
To avoid bloating all UncompiledData, this adds two new UncompiledData
subclasses, making it four subclasses total, for with/without Preparse
data and with/without a Job pointer. "should_parallel_compile"
FunctionLiterals get allocated an UncompiledData with a job pointer by
default, otherwise enqueueing a SFI without a job pointer triggers a
reallocation of the UncompiledData to add a job pointer.
Since there is no longer a set of all Jobs (aside from one for
debug-only), we need to be careful to manually clear the Job pointer
from the UncompiledData whenever we finish a Job (whether successfully
or by aborting) and we have to make sure that we implicitly can reach
all Jobs via the pending/finalizable lists, or the set of currently
running jobs.
Change-Id: I3aae78e6dfbdc74f5f7c1411de398433907b2705
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3314833
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78302}
Previously, since the source code for the synthetic class instance
member initializer function was recorded as the span from the first
initializer to the last initializer, there was no way to reparse the
class and recompile the initializer function. It was working for
most use cases because the code for the initializer function was
generated eagarly and it was usually alive as long as the class was
alive, so the initializer wouldn't normally be lazily parsed. This
didn't work, however, when the class was snapshotted with
v8::SnapshotCreator::FunctionCodeHandling::kClear,
becuase then we needed to recompile the initializer when the class
was instantiated. This patch implements the reparsing so that
these classes can work with FunctionCodeHandling::kClear.
This patch refactors ParserBase::ParseClassLiteral() so that we can
reuse it for both parsing the class body normally and reparsing it
to collect initializers. When reparsing the synthetic initializer
function, we rewind the scanner to the beginning of the class, and
parse the class body to collect the initializers. During the
reparsing, field initializers are parsed with the full parser while
methods of the class are pre-parsed.
A few notable changes:
- Extended the source range of the initializer function to cover the
entire class so that we can rewind the scanner to parse the class
body to collect initializers (previously, it starts from the first
field initializer and ends at the last initializer). This resulted
some expectation changes in the debugger tests, though the
initializers remain debuggable.
- A temporary ClassScope is created during reparsing. After the class
is reparsed, we use the information from the ScopeInfo to update
the allocated indices of the variables in the ClassScope.
Bug: v8:10704
Change-Id: Ifb6431a1447d8844f2a548283d59158742fe9027
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2988830
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Cr-Commit-Position: refs/heads/main@{#78299}
Treat all stack pointers as roots:
- Maintain a global linked-list of StackMemories
- Update StackFrameIterator to process inactive stacks
- Visit roots in all inactive stacks (including root marking and root
pointer updating).
Drive-by:
- Fix some issues uncovered by the test
- Refactor the builtin constants
R=mlippautz@chromium.org,ahaas@chromium.org
Bug: v8:12191
Change-Id: I5b6381f9818166e2eabf80dd59135673dddb2afc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3310932
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Commit-Queue: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78291}
Introduce a ReusableUnoptimizedCompileState class, passed to ParseInfo,
which stores a couple of pointers and most importantly the Zone and
AstValueFactory of the parse. This allows the Zone and AstValueFactory
to be reused across multiple parses, rather than re-initialising
per-Parse.
With this, we can amend the LazyCompileDispatcher to initialise one
LocalIsolate, Zone and AstValueFactory per background thread loop,
rather than one per compile task, which allows us to reduce per-task
costs and re-use the AstValueFactory's string table and previous String
internalizations.
Change-Id: Ia0e29c4e31fbe29af57674ebb10916865d38b2ce
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3313106
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78289}
On the way to a cheaper and more scalable stack frame representation
for the inspector (crbug/1258599), this removes the need to expose
both what was called "function name" and what was called "function
debug name" on a v8::StackFrame instance.
The reason to having a distinction between that the V8 API exposes
and what the inspector exposes as frame function name is that after
the initial refactoring around v8::internal::StackFrameInfo, some
wasm cctests would still dig into the implementation details and
insist on seeing the "function name" rather than the "function
debug name". This CL now addresses that detail in the wasm cctests
and going forward unifies the function names used by the inspector
and the V8 API (which is not only needed for internal consistency
and reduced storage requirements in the future, but also because
Blink for example uses v8 API and v8_inspector API interchangeably
and assumes that they agree, even though at this point Blink
luckily wasn't paying attention to the function name):
- The so-called "detailed stack trace", which is produced for the
inspector and exposed by the v8 API, always yields the "function
debug name" (which for example in case of wasm will be a WAT
compatible name),
- while the so-called "simple stack trace", which is what is used
to implement the CallSite API and underlies Error.stack continues
to stick to the "function name" which in case of wasm is not
WAT compatible).
Bug: chromium:1258599
Change-Id: Ib15d038f3ec893703d0f7b03f6e7573a38e82b39
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3312274
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Simon Zünd <szuend@chromium.org>
Commit-Queue: Benedikt Meurer <bmeurer@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78283}
This is a reland of 2d087f237e
The changes are :
* Fix redundant reinterpret_cast in test file for MSVC failure
https://crbug.com/v8/12476
* Fix flaky test
https://crbug.com/v8/12475
If a sample is captured during a GC, no embedder context is obtained
defaulting to EMPTY. This is the expected behavior, made it in clear
in implementation and in test.
* Synchronized the embedder context filter behavior with existing
native context filter.
Original change's description:
> Add APIs to surface VMState and new EmbedderState to CpuProfile samples.
>
> EmbedderState:
> * An EmbedderState is defined as a value uint8_t and a v8::context used
> for filtering.
> * EmbedderStates are stack allocated by the embedder, construction and
> destruction set/unset the state to the isolate thread local top.
> * A v8::context is used to filter states that are added to a CpuProfile,
> if the CpuProfile do not have a ContextFilter set or if contexts do not
> match, state defaults to Empty.
>
> * v8:StateTag is already propagated all the way to a Sample, simply add
> an API to surface it.
>
> VMState:
> Change-Id: I7eed08907360b99b0ad20ddcff59c95c7076c85e
> Bug: chromium:1263871
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3188072
> Auto-Submit: Corentin Pescheloche <cpescheloche@fb.com>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Commit-Queue: Camillo Bruni <cbruni@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78250}
Bug: chromium:1263871
Change-Id: Ief891b05da99c695e9fb70f94ed7ebdecc6c3b7b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3320037
Auto-Submit: Corentin Pescheloche <cpescheloche@fb.com>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78281}
This reverts commit 863bc2b88a.
Reason for revert: https://crbug.com/1276923
Original change's description:
> [turbofan] Improve StoreStoreElimination
>
> Previously, StoreStoreElimination handled allocations as
> "can observe anything". This is pretty conservative and prohibits
> elimination of repeated double stores to the same field.
> With this CL allocations are changed to "observes initializing or
> transitioning stores".
> This way it is guaranteed that initializing stores to a freshly created
> object or stores that are part of a map transition are not eliminated
> before allocations (that can trigger GC), but allows elimination of
> non-initializing, non-transitioning, unobservable stores in the
> presence of allocations.
>
> Bug: v8:12200
> Change-Id: Ie1419696b9c8cb7c39aecf38d9f08102177b2c0f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3295449
> Commit-Queue: Patrick Thier <pthier@chromium.org>
> Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
> Reviewed-by: Maya Lekova <mslekova@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78230}
Bug: chromium:1276923
Change-Id: I43dc3572ce1ef1fda42b7551ce8210d9f03e36ca
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3318666
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Commit-Queue: Patrick Thier <pthier@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78277}
Checks whether a Persistent is used from the creation thread on slow
path allocations. In practice, these currently happen every 256
Persistent allocations. This is a best effort check that may help to
flush out issues that are missed with DCHECK builds.
Bug: chromium:1276570
Change-Id: Ia868ca436341b1b5ef427d5b3ec04926c1394e41
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3318658
Commit-Queue: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Anton Bikineev <bikineev@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78276}
This CL adds the following specific cases, to make sure they are
correctly handled by the slow path:
- the backing store of a TypedArray gets detached after optimisation
- passing null instead of a TA doesn't lead to a deopt
Bug: v8:11739, chromium:1052746
Change-Id: I7dfd3da9f535831901998ca6fad854af6e93e9f9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3320425
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78274}
This removes the additional call to `didPause` solely for
instrumentation breakpoints. They will be reported along with any
other pause reasons, and if several apply, 'ambiguous' will be
reported as a reason.
Bug: chromium:1229541
Change-Id: I38557248dc2274c2ff2c396aa19073f4a5c5abd5
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3300134
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Commit-Queue: Kim-Anh Tran <kimanh@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78271}
This is a reland of 3ee4804f83.
The CL was originally reverted for blink test failures. Since the
revert, the blink top-level await flag has been removed.
Original change's description:
> [top-level-await] Remove --harmony-top-level-await
>
> TLA has been shipped since v8.9.
>
> Bug: v8:9344, chromium:1271114
> Change-Id: Ibebf21da8bacb1f0d212390133847495ad8553e5
> Reviewed-on:
https://chromium-review.googlesource.com/c/v8/v8/+/3307103
> Commit-Queue: Shu-yu Guo <syg@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Reviewed-by: Marja Hölttä <marja@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78169}
Bug: v8:9344, chromium:1271114
Change-Id: I96a9641967a23a12ba2467a69e5859ad8647f3e3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3318717
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78261}
This aligns the Torque semantics of catch with the JavaScript behavior:
When we catch an exception, we also reset the pending exception.
This also fixes a long-standing bug that we didn't restore the original
pending message after executing arbitrary JS in IteratorCloseOnException
Bug: v8:12439
Change-Id: I268d9d639d09023a424f352547cdce03428f983a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3303805
Commit-Queue: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Stanton <mvstanton@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78259}
For shared strings, String::MakeThin is protected by using the map word
of the string being migrated as a spinlock.
Note that this CL does not make it safe yet to access character data
from multiple threads. The spinlock here only protects write-write races
in String::MakeThin.
For more information, see the following two design docs:
https://docs.google.com/document/d/1c5i8f2EfKIQygGZ23hNiGxouvRISjUMnJjNsOodj6z0/edithttps://docs.google.com/document/d/1Drzigf17t4ofy0evDmaIL5p0MDZuAl95c9fSeX-QjVg/edit
Bug: v8:12007
Change-Id: I9c47412c6ec7360a672b65a8576b4f6156ee5846
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3313429
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Patrick Thier <pthier@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78257}
This reverts commit 2d087f237e.
Reason for revert:
- Causing MSVC build failures: https://crbug.com/v8/12476
- Causing flaky failures: https://crbug.com/v8/12475
Original change's description:
> [profiler] Surface VM & Embedder State
>
> Add APIs to surface VMState and new EmbedderState to CpuProfile samples.
>
> EmbedderState:
> * An EmbedderState is defined as a value uint8_t and a v8::context used
> for filtering.
> * EmbedderStates are stack allocated by the embedder, construction and
> destruction set/unset the state to the isolate thread local top.
> * A v8::context is used to filter states that are added to a CpuProfile,
> if the CpuProfile do not have a ContextFilter set or if contexts do not
> match, state defaults to Empty.
>
> * v8:StateTag is already propagated all the way to a Sample, simply add
> an API to surface it.
>
> VMState:
> Change-Id: I7eed08907360b99b0ad20ddcff59c95c7076c85e
> Bug: chromium:1263871
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3188072
> Auto-Submit: Corentin Pescheloche <cpescheloche@fb.com>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
> Reviewed-by: Igor Sheludko <ishell@chromium.org>
> Commit-Queue: Camillo Bruni <cbruni@chromium.org>
> Cr-Commit-Position: refs/heads/main@{#78250}
Bug: chromium:1263871, v8:12475, v8:12476
Change-Id: I02670b1ed3bb863033208369227642a7419fce00
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3315444
Bot-Commit: Rubber Stamper <rubber-stamper@appspot.gserviceaccount.com>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78256}
Add APIs to surface VMState and new EmbedderState to CpuProfile samples.
EmbedderState:
* An EmbedderState is defined as a value uint8_t and a v8::context used
for filtering.
* EmbedderStates are stack allocated by the embedder, construction and
destruction set/unset the state to the isolate thread local top.
* A v8::context is used to filter states that are added to a CpuProfile,
if the CpuProfile do not have a ContextFilter set or if contexts do not
match, state defaults to Empty.
* v8:StateTag is already propagated all the way to a Sample, simply add
an API to surface it.
VMState:
Change-Id: I7eed08907360b99b0ad20ddcff59c95c7076c85e
Bug: chromium:1263871
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3188072
Auto-Submit: Corentin Pescheloche <cpescheloche@fb.com>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78250}
This CL makes sure that the API reports an error if the embedder
attempts to create a fast API function which could be used as a
constructor. It also adds corresponding cctest.
Bug: chromium:1052746
Change-Id: I36e51b298889900131bd5c3894134df3d8d28e5f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3314856
Commit-Queue: Maya Lekova <mslekova@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78243}
When performing a shared GC, we need to find references from the client
heaps into the shared heaps. For now we achieve this by simply
iterating all objects in client heaps.
We need to do this both for marking and when updating pointers after
evacuation.
Bug: v8:11708
Change-Id: Ic1dd94cc352be0404095e548979c37b1ef25682a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3300142
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78240}
This interface is meant to eventually replace the existing
v8::PageAllocator interface. Beyond general refactoring of the
PageAllocator APIs, the new interface now supports the concept of
(contiguous) address space reservations, which previously had to be
implemented through page allocations. These reservations now make better
use of provided OS primitives on Fuchsia (VMARs) and Windows
(placeholder mappings) and can be used to back many of the cages and
virtual memory regions that V8 creates.
The new interface is not yet stable and may change at any time without
deprecating the old version first.
Bug: chromium:1218005
Change-Id: I295253c42e04cf311393c5dab9f8c06bd7451ce3
Cq-Include-Trybots: luci.v8.try:v8_linux64_heap_sandbox_dbg_ng,v8_linux_arm64_sim_heap_sandbox_dbg_ng
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3301475
Commit-Queue: Samuel Groß <saelo@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78235}
This is in preparation for supporting concurrent access in
String::SlowEquals, which will need to compare character buffers with
relaxed ordering.
Bug: v8:12007
Change-Id: Ie8ac62c15df48ebd605985c35b843b510c7ad167
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3313467
Commit-Queue: Shu-yu Guo <syg@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78231}
Previously, StoreStoreElimination handled allocations as
"can observe anything". This is pretty conservative and prohibits
elimination of repeated double stores to the same field.
With this CL allocations are changed to "observes initializing or
transitioning stores".
This way it is guaranteed that initializing stores to a freshly created
object or stores that are part of a map transition are not eliminated
before allocations (that can trigger GC), but allows elimination of
non-initializing, non-transitioning, unobservable stores in the
presence of allocations.
Bug: v8:12200
Change-Id: Ie1419696b9c8cb7c39aecf38d9f08102177b2c0f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3295449
Commit-Queue: Patrick Thier <pthier@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78230}
Rather than creating a ParseInfo when creating a BackgroundCompileTask
(and passing ownership across to the BG thread which deallocates it),
create one when running it.
This allows the ParseInfo Zone to be both allocated and deallocated on
the same thread, which will improve its allocator friendliness.
As a side-effect, we now use the on-heap PreparseData from the
SharedFunctionInfo, rather than cloning the in-Zone PreparseData. This
means that we don't have to copy the PreparseData across Zones, but we
do need to Unpark the LocalHeap when accessing preparse data.
Change-Id: I16d976c1ad54c1090180f2936f40a23a6dbb5904
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3312483
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78228}
If multiple isolates are running concurrently and one of them calls
`quit`, we should not delete the counters map, because another isolate
might still access it.
R=mlippautz@chromium.orgCC=nikolaos@chromium.org
Bug: v8:12453
Change-Id: I6d41478f188f0043b7d6055b0872574c28fd3039
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3310807
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78226}
This allows streamed sources to also trigger parallel compile tasks. The
chunk vectors are shared via std::shared_ptr.
Clone chunked streams are initialised with a null source, and are not
allowed to fetch any more data. Similarly, the original stream is not
allowed to fetch data if it has been cloned (since the vector is shared
and would mutate if we added more data to it).
This is ok for the purposes of cloning for parallel compile tasks, as we
fully parse before cloning for the task.
Change-Id: Ic268e4956e0894acb63111bf0aaf32eaad426066
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3310917
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78209}
This CL makes sure to forward the information that we are pausing
because of a debugger statement, and to encode it explicitly
as an 'other' reason when reporting the pause to the front-end.
Drive-by: refactoring the way break reasons are propagated by
introducing a new enum for break reasons
Bug: chromium:1229541, chromium:1133307
Change-Id: I9d2e8d8da54d96a231eff9d1f62b74507955b18f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3306978
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Kim-Anh Tran <kimanh@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78202}
We optimize away type upcasts for nominal types in WasmFullDecoder.
Upcasts trivially hold for nominal types, which is not the case for
structural types. Note that we already optimize away trivially-failing
checks (when types are unrelated) for both nominal and structural types.
Bug: v8:7748
Change-Id: I720c9803cb8b4071aa4bae112ce06d587b7a68fa
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3306984
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/main@{#78201}
