SPIRV-Cross/spirv_msl.hpp

1298 lines
60 KiB
C++
Raw Normal View History

/*
* Copyright 2016-2021 The Brenwill Workshop Ltd.
* SPDX-License-Identifier: Apache-2.0 OR MIT
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* At your option, you may choose to accept this material under either:
* 1. The Apache License, Version 2.0, found at <http://www.apache.org/licenses/LICENSE-2.0>, or
* 2. The MIT License, found at <http://opensource.org/licenses/MIT>.
*/
#ifndef SPIRV_CROSS_MSL_HPP
#define SPIRV_CROSS_MSL_HPP
#include "spirv_glsl.hpp"
#include <map>
#include <set>
2019-06-21 14:02:22 +00:00
#include <stddef.h>
#include <unordered_map>
#include <unordered_set>
namespace SPIRV_CROSS_NAMESPACE
{
// Indicates the format of a shader interface variable. Currently limited to specifying
// if the input is an 8-bit unsigned integer, 16-bit unsigned integer, or
// some other format.
enum MSLShaderVariableFormat
{
MSL_SHADER_VARIABLE_FORMAT_OTHER = 0,
MSL_SHADER_VARIABLE_FORMAT_UINT8 = 1,
MSL_SHADER_VARIABLE_FORMAT_UINT16 = 2,
MSL_SHADER_VARIABLE_FORMAT_ANY16 = 3,
MSL_SHADER_VARIABLE_FORMAT_ANY32 = 4,
// Deprecated aliases.
MSL_VERTEX_FORMAT_OTHER = MSL_SHADER_VARIABLE_FORMAT_OTHER,
MSL_VERTEX_FORMAT_UINT8 = MSL_SHADER_VARIABLE_FORMAT_UINT8,
MSL_VERTEX_FORMAT_UINT16 = MSL_SHADER_VARIABLE_FORMAT_UINT16,
MSL_SHADER_INPUT_FORMAT_OTHER = MSL_SHADER_VARIABLE_FORMAT_OTHER,
MSL_SHADER_INPUT_FORMAT_UINT8 = MSL_SHADER_VARIABLE_FORMAT_UINT8,
MSL_SHADER_INPUT_FORMAT_UINT16 = MSL_SHADER_VARIABLE_FORMAT_UINT16,
MSL_SHADER_INPUT_FORMAT_ANY16 = MSL_SHADER_VARIABLE_FORMAT_ANY16,
MSL_SHADER_INPUT_FORMAT_ANY32 = MSL_SHADER_VARIABLE_FORMAT_ANY32,
MSL_SHADER_VARIABLE_FORMAT_INT_MAX = 0x7fffffff
};
// Indicates the rate at which a variable changes value, one of: per-vertex,
// per-primitive, or per-patch.
enum MSLShaderVariableRate
{
MSL_SHADER_VARIABLE_RATE_PER_VERTEX = 0,
MSL_SHADER_VARIABLE_RATE_PER_PRIMITIVE = 1,
MSL_SHADER_VARIABLE_RATE_PER_PATCH = 2,
MSL_SHADER_VARIABLE_RATE_INT_MAX = 0x7fffffff,
};
// Defines MSL characteristics of a shader interface variable at a particular location.
// After compilation, it is possible to query whether or not this location was used.
// If vecsize is nonzero, it must be greater than or equal to the vecsize declared in the shader,
// or behavior is undefined.
struct MSLShaderInterfaceVariable
{
uint32_t location = 0;
uint32_t component = 0;
MSLShaderVariableFormat format = MSL_SHADER_VARIABLE_FORMAT_OTHER;
spv::BuiltIn builtin = spv::BuiltInMax;
uint32_t vecsize = 0;
MSLShaderVariableRate rate = MSL_SHADER_VARIABLE_RATE_PER_VERTEX;
};
// Matches the binding index of a MSL resource for a binding within a descriptor set.
// Taken together, the stage, desc_set and binding combine to form a reference to a resource
// descriptor used in a particular shading stage. The count field indicates the number of
// resources consumed by this binding, if the binding represents an array of resources.
// If the resource array is a run-time-sized array, which are legal in GLSL or SPIR-V, this value
// will be used to declare the array size in MSL, which does not support run-time-sized arrays.
// If pad_argument_buffer_resources is enabled, the base_type and count values are used to
// specify the base type and array size of the resource in the argument buffer, if that resource
// is not defined and used by the shader. With pad_argument_buffer_resources enabled, this
// information will be used to pad the argument buffer structure, in order to align that
// structure consistently for all uses, across all shaders, of the descriptor set represented
// by the arugment buffer. If pad_argument_buffer_resources is disabled, base_type does not
// need to be populated, and if the resource is also not a run-time sized array, the count
// field does not need to be populated.
// If using MSL 2.0 argument buffers, the descriptor set is not marked as a discrete descriptor set,
// and (for iOS only) the resource is not a storage image (sampled != 2), the binding reference we
// remap to will become an [[id(N)]] attribute within the "descriptor set" argument buffer structure.
// For resources which are bound in the "classic" MSL 1.0 way or discrete descriptors, the remap will
// become a [[buffer(N)]], [[texture(N)]] or [[sampler(N)]] depending on the resource types used.
struct MSLResourceBinding
{
spv::ExecutionModel stage = spv::ExecutionModelMax;
SPIRType::BaseType basetype = SPIRType::Unknown;
uint32_t desc_set = 0;
uint32_t binding = 0;
uint32_t count = 0;
2019-03-04 09:08:31 +00:00
uint32_t msl_buffer = 0;
uint32_t msl_texture = 0;
uint32_t msl_sampler = 0;
};
enum MSLSamplerCoord
{
MSL_SAMPLER_COORD_NORMALIZED = 0,
MSL_SAMPLER_COORD_PIXEL = 1,
MSL_SAMPLER_INT_MAX = 0x7fffffff
};
enum MSLSamplerFilter
{
MSL_SAMPLER_FILTER_NEAREST = 0,
MSL_SAMPLER_FILTER_LINEAR = 1,
MSL_SAMPLER_FILTER_INT_MAX = 0x7fffffff
};
enum MSLSamplerMipFilter
{
MSL_SAMPLER_MIP_FILTER_NONE = 0,
MSL_SAMPLER_MIP_FILTER_NEAREST = 1,
MSL_SAMPLER_MIP_FILTER_LINEAR = 2,
MSL_SAMPLER_MIP_FILTER_INT_MAX = 0x7fffffff
};
enum MSLSamplerAddress
{
MSL_SAMPLER_ADDRESS_CLAMP_TO_ZERO = 0,
MSL_SAMPLER_ADDRESS_CLAMP_TO_EDGE = 1,
MSL_SAMPLER_ADDRESS_CLAMP_TO_BORDER = 2,
MSL_SAMPLER_ADDRESS_REPEAT = 3,
MSL_SAMPLER_ADDRESS_MIRRORED_REPEAT = 4,
MSL_SAMPLER_ADDRESS_INT_MAX = 0x7fffffff
};
enum MSLSamplerCompareFunc
{
MSL_SAMPLER_COMPARE_FUNC_NEVER = 0,
MSL_SAMPLER_COMPARE_FUNC_LESS = 1,
MSL_SAMPLER_COMPARE_FUNC_LESS_EQUAL = 2,
MSL_SAMPLER_COMPARE_FUNC_GREATER = 3,
MSL_SAMPLER_COMPARE_FUNC_GREATER_EQUAL = 4,
MSL_SAMPLER_COMPARE_FUNC_EQUAL = 5,
MSL_SAMPLER_COMPARE_FUNC_NOT_EQUAL = 6,
MSL_SAMPLER_COMPARE_FUNC_ALWAYS = 7,
MSL_SAMPLER_COMPARE_FUNC_INT_MAX = 0x7fffffff
};
enum MSLSamplerBorderColor
{
MSL_SAMPLER_BORDER_COLOR_TRANSPARENT_BLACK = 0,
MSL_SAMPLER_BORDER_COLOR_OPAQUE_BLACK = 1,
MSL_SAMPLER_BORDER_COLOR_OPAQUE_WHITE = 2,
MSL_SAMPLER_BORDER_COLOR_INT_MAX = 0x7fffffff
};
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
enum MSLFormatResolution
{
MSL_FORMAT_RESOLUTION_444 = 0,
MSL_FORMAT_RESOLUTION_422,
MSL_FORMAT_RESOLUTION_420,
MSL_FORMAT_RESOLUTION_INT_MAX = 0x7fffffff
};
enum MSLChromaLocation
{
MSL_CHROMA_LOCATION_COSITED_EVEN = 0,
MSL_CHROMA_LOCATION_MIDPOINT,
MSL_CHROMA_LOCATION_INT_MAX = 0x7fffffff
};
enum MSLComponentSwizzle
{
MSL_COMPONENT_SWIZZLE_IDENTITY = 0,
MSL_COMPONENT_SWIZZLE_ZERO,
MSL_COMPONENT_SWIZZLE_ONE,
MSL_COMPONENT_SWIZZLE_R,
MSL_COMPONENT_SWIZZLE_G,
MSL_COMPONENT_SWIZZLE_B,
MSL_COMPONENT_SWIZZLE_A,
MSL_COMPONENT_SWIZZLE_INT_MAX = 0x7fffffff
};
enum MSLSamplerYCbCrModelConversion
{
MSL_SAMPLER_YCBCR_MODEL_CONVERSION_RGB_IDENTITY = 0,
MSL_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_IDENTITY,
MSL_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_BT_709,
MSL_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_BT_601,
MSL_SAMPLER_YCBCR_MODEL_CONVERSION_YCBCR_BT_2020,
MSL_SAMPLER_YCBCR_MODEL_CONVERSION_INT_MAX = 0x7fffffff
};
enum MSLSamplerYCbCrRange
{
MSL_SAMPLER_YCBCR_RANGE_ITU_FULL = 0,
MSL_SAMPLER_YCBCR_RANGE_ITU_NARROW,
MSL_SAMPLER_YCBCR_RANGE_INT_MAX = 0x7fffffff
};
struct MSLConstexprSampler
{
MSLSamplerCoord coord = MSL_SAMPLER_COORD_NORMALIZED;
MSLSamplerFilter min_filter = MSL_SAMPLER_FILTER_NEAREST;
MSLSamplerFilter mag_filter = MSL_SAMPLER_FILTER_NEAREST;
MSLSamplerMipFilter mip_filter = MSL_SAMPLER_MIP_FILTER_NONE;
MSLSamplerAddress s_address = MSL_SAMPLER_ADDRESS_CLAMP_TO_EDGE;
MSLSamplerAddress t_address = MSL_SAMPLER_ADDRESS_CLAMP_TO_EDGE;
MSLSamplerAddress r_address = MSL_SAMPLER_ADDRESS_CLAMP_TO_EDGE;
MSLSamplerCompareFunc compare_func = MSL_SAMPLER_COMPARE_FUNC_NEVER;
MSLSamplerBorderColor border_color = MSL_SAMPLER_BORDER_COLOR_TRANSPARENT_BLACK;
float lod_clamp_min = 0.0f;
float lod_clamp_max = 1000.0f;
int max_anisotropy = 1;
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
// Sampler Y'CbCr conversion parameters
uint32_t planes = 0;
MSLFormatResolution resolution = MSL_FORMAT_RESOLUTION_444;
MSLSamplerFilter chroma_filter = MSL_SAMPLER_FILTER_NEAREST;
MSLChromaLocation x_chroma_offset = MSL_CHROMA_LOCATION_COSITED_EVEN;
MSLChromaLocation y_chroma_offset = MSL_CHROMA_LOCATION_COSITED_EVEN;
MSLComponentSwizzle swizzle[4]; // IDENTITY, IDENTITY, IDENTITY, IDENTITY
MSLSamplerYCbCrModelConversion ycbcr_model = MSL_SAMPLER_YCBCR_MODEL_CONVERSION_RGB_IDENTITY;
MSLSamplerYCbCrRange ycbcr_range = MSL_SAMPLER_YCBCR_RANGE_ITU_FULL;
uint32_t bpc = 8;
bool compare_enable = false;
bool lod_clamp_enable = false;
bool anisotropy_enable = false;
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
bool ycbcr_conversion_enable = false;
MSLConstexprSampler()
{
for (uint32_t i = 0; i < 4; i++)
swizzle[i] = MSL_COMPONENT_SWIZZLE_IDENTITY;
}
bool swizzle_is_identity() const
{
return (swizzle[0] == MSL_COMPONENT_SWIZZLE_IDENTITY && swizzle[1] == MSL_COMPONENT_SWIZZLE_IDENTITY &&
swizzle[2] == MSL_COMPONENT_SWIZZLE_IDENTITY && swizzle[3] == MSL_COMPONENT_SWIZZLE_IDENTITY);
}
bool swizzle_has_one_or_zero() const
{
return (swizzle[0] == MSL_COMPONENT_SWIZZLE_ZERO || swizzle[0] == MSL_COMPONENT_SWIZZLE_ONE ||
swizzle[1] == MSL_COMPONENT_SWIZZLE_ZERO || swizzle[1] == MSL_COMPONENT_SWIZZLE_ONE ||
swizzle[2] == MSL_COMPONENT_SWIZZLE_ZERO || swizzle[2] == MSL_COMPONENT_SWIZZLE_ONE ||
swizzle[3] == MSL_COMPONENT_SWIZZLE_ZERO || swizzle[3] == MSL_COMPONENT_SWIZZLE_ONE);
}
};
// Special constant used in a MSLResourceBinding desc_set
// element to indicate the bindings for the push constants.
// Kinda deprecated. Just use ResourceBindingPushConstant{DescriptorSet,Binding} directly.
static const uint32_t kPushConstDescSet = ResourceBindingPushConstantDescriptorSet;
// Special constant used in a MSLResourceBinding binding
// element to indicate the bindings for the push constants.
// Kinda deprecated. Just use ResourceBindingPushConstant{DescriptorSet,Binding} directly.
static const uint32_t kPushConstBinding = ResourceBindingPushConstantBinding;
// Special constant used in a MSLResourceBinding binding
// element to indicate the buffer binding for swizzle buffers.
static const uint32_t kSwizzleBufferBinding = ~(1u);
// Special constant used in a MSLResourceBinding binding
// element to indicate the buffer binding for buffer size buffers to support OpArrayLength.
static const uint32_t kBufferSizeBufferBinding = ~(2u);
// Special constant used in a MSLResourceBinding binding
// element to indicate the buffer binding used for the argument buffer itself.
// This buffer binding should be kept as small as possible as all automatic bindings for buffers
// will start at max(kArgumentBufferBinding) + 1.
static const uint32_t kArgumentBufferBinding = ~(3u);
static const uint32_t kMaxArgumentBuffers = 8;
// The arbitrary maximum for the nesting of array of array copies.
static const uint32_t kArrayCopyMultidimMax = 6;
// Decompiles SPIR-V to Metal Shading Language
class CompilerMSL : public CompilerGLSL
{
public:
// Options for compiling to Metal Shading Language
struct Options
{
2018-04-03 12:08:15 +00:00
typedef enum
{
iOS = 0,
macOS = 1
} Platform;
Platform platform = macOS;
2017-11-10 21:40:33 +00:00
uint32_t msl_version = make_msl_version(1, 2);
2018-06-28 21:00:26 +00:00
uint32_t texel_buffer_texture_width = 4096; // Width of 2D Metal textures used as 1D texel buffers
uint32_t r32ui_linear_texture_alignment = 4;
uint32_t r32ui_alignment_constant_id = 65535;
uint32_t swizzle_buffer_index = 30;
uint32_t indirect_params_buffer_index = 29;
uint32_t shader_output_buffer_index = 28;
uint32_t shader_patch_output_buffer_index = 27;
uint32_t shader_tess_factor_buffer_index = 26;
uint32_t buffer_size_buffer_index = 25;
uint32_t view_mask_buffer_index = 24;
uint32_t dynamic_offsets_buffer_index = 23;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
uint32_t shader_input_buffer_index = 22;
uint32_t shader_index_buffer_index = 21;
uint32_t shader_patch_input_buffer_index = 20;
uint32_t shader_input_wg_index = 0;
uint32_t device_index = 0;
uint32_t enable_frag_output_mask = 0xffffffff;
// Metal doesn't allow setting a fixed sample mask directly in the pipeline.
// We can evade this restriction by ANDing the internal sample_mask output
// of the shader with the additional fixed sample mask.
uint32_t additional_fixed_sample_mask = 0xffffffff;
bool enable_point_size_builtin = true;
bool enable_frag_depth_builtin = true;
bool enable_frag_stencil_ref_builtin = true;
bool disable_rasterization = false;
bool capture_output_to_buffer = false;
bool swizzle_texture_samples = false;
bool tess_domain_origin_lower_left = false;
bool multiview = false;
bool multiview_layered_rendering = true;
bool view_index_from_device_index = false;
bool dispatch_base = false;
bool texture_1D_as_2D = false;
// Enable use of Metal argument buffers.
// MSL 2.0 must also be enabled.
bool argument_buffers = false;
2017-11-07 20:38:13 +00:00
// Defines Metal argument buffer tier levels.
// Uses same values as Metal MTLArgumentBuffersTier enumeration.
enum class ArgumentBuffersTier
{
Tier1 = 0,
Tier2 = 1,
};
// When using Metal argument buffers, indicates the Metal argument buffer tier level supported by the Metal platform.
// Ignored when Options::argument_buffers is disabled.
// - Tier1 supports writable images on macOS, but not on iOS.
// - Tier2 supports writable images on macOS and iOS, and higher resource count limits.
// Tier capabilities based on recommendations from Apple engineering.
ArgumentBuffersTier argument_buffers_tier = ArgumentBuffersTier::Tier1;
2019-09-23 22:05:04 +00:00
// Ensures vertex and instance indices start at zero. This reflects the behavior of HLSL with SV_VertexID and SV_InstanceID.
bool enable_base_index_zero = false;
// Fragment output in MSL must have at least as many components as the render pass.
// Add support to explicit pad out components.
bool pad_fragment_output_components = false;
2019-09-23 22:05:04 +00:00
// Specifies whether the iOS target version supports the [[base_vertex]] and [[base_instance]] attributes.
bool ios_support_base_vertex_instance = false;
// Use Metal's native frame-buffer fetch API for subpass inputs.
bool use_framebuffer_fetch_subpasses = false;
2019-09-23 22:05:04 +00:00
// Enables use of "fma" intrinsic for invariant float math
bool invariant_float_math = false;
2019-09-23 22:05:04 +00:00
// Emulate texturecube_array with texture2d_array for iOS where this type is not available
bool emulate_cube_array = false;
// Allow user to enable decoration binding
bool enable_decoration_binding = false;
// Requires MSL 2.1, use the native support for texel buffers.
bool texture_buffer_native = false;
// Forces all resources which are part of an argument buffer to be considered active.
// This ensures ABI compatibility between shaders where some resources might be unused,
// and would otherwise declare a different IAB.
bool force_active_argument_buffer_resources = false;
// Aligns each resource in an argument buffer to its assigned index value, id(N),
// by adding synthetic padding members in the argument buffer struct for any resources
// in the argument buffer that are not defined and used by the shader. This allows
// the shader to index into the correct argument in a descriptor set argument buffer
// that is shared across shaders, where not all resources in the argument buffer are
// defined in each shader. For this to work, an MSLResourceBinding must be provided for
// all descriptors in any descriptor set held in an argument buffer in the shader, and
// that MSLResourceBinding must have the basetype and count members populated correctly.
// The implementation here assumes any inline blocks in the argument buffer is provided
// in a Metal buffer, and doesn't take into consideration inline blocks that are
// optionally embedded directly into the argument buffer via add_inline_uniform_block().
bool pad_argument_buffer_resources = false;
// Forces the use of plain arrays, which works around certain driver bugs on certain versions
// of Intel Macbooks. See https://github.com/KhronosGroup/SPIRV-Cross/issues/1210.
// May reduce performance in scenarios where arrays are copied around as value-types.
bool force_native_arrays = false;
// If a shader writes clip distance, also emit user varyings which
// can be read in subsequent stages.
bool enable_clip_distance_user_varying = true;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
// In a tessellation control shader, assume that more than one patch can be processed in a
// single workgroup. This requires changes to the way the InvocationId and PrimitiveId
// builtins are processed, but should result in more efficient usage of the GPU.
bool multi_patch_workgroup = false;
// Use storage buffers instead of vertex-style attributes for tessellation evaluation
// input. This may require conversion of inputs in the generated post-tessellation
// vertex shader, but allows the use of nested arrays.
bool raw_buffer_tese_input = false;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
// If set, a vertex shader will be compiled as part of a tessellation pipeline.
// It will be translated as a compute kernel, so it can use the global invocation ID
// to index the output buffer.
bool vertex_for_tessellation = false;
// Assume that SubpassData images have multiple layers. Layered input attachments
// are addressed relative to the Layer output from the vertex pipeline. This option
// has no effect with multiview, since all input attachments are assumed to be layered
// and will be addressed using the current ViewIndex.
bool arrayed_subpass_input = false;
// Whether to use SIMD-group or quadgroup functions to implement group non-uniform
// operations. Some GPUs on iOS do not support the SIMD-group functions, only the
// quadgroup functions.
bool ios_use_simdgroup_functions = false;
// If set, the subgroup size will be assumed to be one, and subgroup-related
// builtins and operations will be emitted accordingly. This mode is intended to
// be used by MoltenVK on hardware/software configurations which do not provide
// sufficient support for subgroups.
bool emulate_subgroups = false;
// If nonzero, a fixed subgroup size to assume. Metal, similarly to VK_EXT_subgroup_size_control,
// allows the SIMD-group size (aka thread execution width) to vary depending on
// register usage and requirements. In certain circumstances--for example, a pipeline
// in MoltenVK without VK_PIPELINE_SHADER_STAGE_CREATE_ALLOW_VARYING_SUBGROUP_SIZE_BIT_EXT--
// this is undesirable. This fixes the value of the SubgroupSize builtin, instead of
// mapping it to the Metal builtin [[thread_execution_width]]. If the thread
// execution width is reduced, the extra invocations will appear to be inactive.
// If zero, the SubgroupSize will be allowed to vary, and the builtin will be mapped
// to the Metal [[thread_execution_width]] builtin.
uint32_t fixed_subgroup_size = 0;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
enum class IndexType
{
None = 0,
UInt16 = 1,
UInt32 = 2
};
// The type of index in the index buffer, if present. For a compute shader, Metal
// requires specifying the indexing at pipeline creation, rather than at draw time
// as with graphics pipelines. This means we must create three different pipelines,
// for no indexing, 16-bit indices, and 32-bit indices. Each requires different
// handling for the gl_VertexIndex builtin. We may as well, then, create three
// different shaders for these three scenarios.
IndexType vertex_index_type = IndexType::None;
// If set, a dummy [[sample_id]] input is added to a fragment shader if none is present.
// This will force the shader to run at sample rate, assuming Metal does not optimize
// the extra threads away.
bool force_sample_rate_shading = false;
// If set, gl_HelperInvocation will be set manually whenever a fragment is discarded.
// Some Metal devices have a bug where simd_is_helper_thread() does not return true
// after a fragment has been discarded. This is a workaround that is only expected to be needed
// until the bug is fixed in Metal; it is provided as an option to allow disabling it when that occurs.
bool manual_helper_invocation_updates = true;
// If set, extra checks will be emitted in fragment shaders to prevent writes
// from discarded fragments. Some Metal devices have a bug where writes to storage resources
// from discarded fragment threads continue to occur, despite the fragment being
// discarded. This is a workaround that is only expected to be needed until the
// bug is fixed in Metal; it is provided as an option so it can be enabled
// only when the bug is present.
bool check_discarded_frag_stores = false;
// If set, Lod operands to OpImageSample*DrefExplicitLod for 1D and 2D array images
// will be implemented using a gradient instead of passing the level operand directly.
// Some Metal devices have a bug where the level() argument to depth2d_array<T>::sample_compare()
// in a fragment shader is biased by some unknown amount, possibly dependent on the
// partial derivatives of the texture coordinates. This is a workaround that is only
// expected to be needed until the bug is fixed in Metal; it is provided as an option
// so it can be enabled only when the bug is present.
bool sample_dref_lod_array_as_grad = false;
bool is_ios() const
{
return platform == iOS;
}
bool is_macos() const
{
return platform == macOS;
}
bool use_quadgroup_operation() const
{
return is_ios() && !ios_use_simdgroup_functions;
}
2017-11-07 20:38:13 +00:00
void set_msl_version(uint32_t major, uint32_t minor = 0, uint32_t patch = 0)
{
2017-11-10 21:40:33 +00:00
msl_version = make_msl_version(major, minor, patch);
2017-11-07 20:38:13 +00:00
}
bool supports_msl_version(uint32_t major, uint32_t minor = 0, uint32_t patch = 0) const
2017-11-07 20:38:13 +00:00
{
2017-11-10 21:40:33 +00:00
return msl_version >= make_msl_version(major, minor, patch);
}
static uint32_t make_msl_version(uint32_t major, uint32_t minor = 0, uint32_t patch = 0)
{
return (major * 10000) + (minor * 100) + patch;
2017-11-07 20:38:13 +00:00
}
};
const Options &get_msl_options() const
{
return msl_options;
}
void set_msl_options(const Options &opts)
{
msl_options = opts;
}
// Provide feedback to calling API to allow runtime to disable pipeline
// rasterization if vertex shader requires rasterization to be disabled.
bool get_is_rasterization_disabled() const
{
return is_rasterization_disabled && (get_entry_point().model == spv::ExecutionModelVertex ||
get_entry_point().model == spv::ExecutionModelTessellationControl ||
get_entry_point().model == spv::ExecutionModelTessellationEvaluation);
}
// Provide feedback to calling API to allow it to pass an auxiliary
// swizzle buffer if the shader needs it.
bool needs_swizzle_buffer() const
{
return used_swizzle_buffer;
}
// Provide feedback to calling API to allow it to pass a buffer
// containing STORAGE_BUFFER buffer sizes to support OpArrayLength.
bool needs_buffer_size_buffer() const
{
return !buffers_requiring_array_length.empty();
}
bool buffer_requires_array_length(VariableID id) const
{
return buffers_requiring_array_length.count(id) != 0;
}
// Provide feedback to calling API to allow it to pass a buffer
// containing the view mask for the current multiview subpass.
bool needs_view_mask_buffer() const
{
return msl_options.multiview && !msl_options.view_index_from_device_index;
}
// Provide feedback to calling API to allow it to pass a buffer
// containing the dispatch base workgroup ID.
bool needs_dispatch_base_buffer() const
{
return msl_options.dispatch_base && !msl_options.supports_msl_version(1, 2);
}
// Provide feedback to calling API to allow it to pass an output
// buffer if the shader needs it.
bool needs_output_buffer() const
{
return capture_output_to_buffer && stage_out_var_id != ID(0);
}
// Provide feedback to calling API to allow it to pass a patch output
// buffer if the shader needs it.
bool needs_patch_output_buffer() const
{
return capture_output_to_buffer && patch_stage_out_var_id != ID(0);
}
// Provide feedback to calling API to allow it to pass an input threadgroup
// buffer if the shader needs it.
bool needs_input_threadgroup_mem() const
{
return capture_output_to_buffer && stage_in_var_id != ID(0);
}
explicit CompilerMSL(std::vector<uint32_t> spirv);
CompilerMSL(const uint32_t *ir, size_t word_count);
explicit CompilerMSL(const ParsedIR &ir);
explicit CompilerMSL(ParsedIR &&ir);
// input is a shader interface variable description used to fix up shader input variables.
// If shader inputs are provided, is_msl_shader_input_used() will return true after
// calling ::compile() if the location were used by the MSL code.
void add_msl_shader_input(const MSLShaderInterfaceVariable &input);
// output is a shader interface variable description used to fix up shader output variables.
// If shader outputs are provided, is_msl_shader_output_used() will return true after
// calling ::compile() if the location were used by the MSL code.
void add_msl_shader_output(const MSLShaderInterfaceVariable &output);
// resource is a resource binding to indicate the MSL buffer,
// texture or sampler index to use for a particular SPIR-V description set
// and binding. If resource bindings are provided,
// is_msl_resource_binding_used() will return true after calling ::compile() if
// the set/binding combination was used by the MSL code.
void add_msl_resource_binding(const MSLResourceBinding &resource);
// desc_set and binding are the SPIR-V descriptor set and binding of a buffer resource
// in this shader. index is the index within the dynamic offset buffer to use. This
// function marks that resource as using a dynamic offset (VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC
// or VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC). This function only has any effect if argument buffers
// are enabled. If so, the buffer will have its address adjusted at the beginning of the shader with
// an offset taken from the dynamic offset buffer.
void add_dynamic_buffer(uint32_t desc_set, uint32_t binding, uint32_t index);
// desc_set and binding are the SPIR-V descriptor set and binding of a buffer resource
// in this shader. This function marks that resource as an inline uniform block
// (VK_DESCRIPTOR_TYPE_INLINE_UNIFORM_BLOCK_EXT). This function only has any effect if argument buffers
// are enabled. If so, the buffer block will be directly embedded into the argument
// buffer, instead of being referenced indirectly via pointer.
void add_inline_uniform_block(uint32_t desc_set, uint32_t binding);
// When using MSL argument buffers, we can force "classic" MSL 1.0 binding schemes for certain descriptor sets.
// This corresponds to VK_KHR_push_descriptor in Vulkan.
void add_discrete_descriptor_set(uint32_t desc_set);
// If an argument buffer is large enough, it may need to be in the device storage space rather than
// constant. Opt-in to this behavior here on a per set basis.
void set_argument_buffer_device_address_space(uint32_t desc_set, bool device_storage);
// Query after compilation is done. This allows you to check if an input location was used by the shader.
bool is_msl_shader_input_used(uint32_t location);
// Query after compilation is done. This allows you to check if an output location were used by the shader.
bool is_msl_shader_output_used(uint32_t location);
// If not using add_msl_shader_input, it's possible
// that certain builtin attributes need to be automatically assigned locations.
// This is typical for tessellation builtin inputs such as tess levels, gl_Position, etc.
// This returns k_unknown_location if the location was explicitly assigned with
// add_msl_shader_input or the builtin is not used, otherwise returns N in [[attribute(N)]].
uint32_t get_automatic_builtin_input_location(spv::BuiltIn builtin) const;
// If not using add_msl_shader_output, it's possible
// that certain builtin attributes need to be automatically assigned locations.
// This is typical for tessellation builtin outputs such as tess levels, gl_Position, etc.
// This returns k_unknown_location if the location were explicitly assigned with
// add_msl_shader_output or the builtin were not used, otherwise returns N in [[attribute(N)]].
uint32_t get_automatic_builtin_output_location(spv::BuiltIn builtin) const;
// NOTE: Only resources which are remapped using add_msl_resource_binding will be reported here.
// Constexpr samplers are always assumed to be emitted.
// No specific MSLResourceBinding remapping is required for constexpr samplers as long as they are remapped
// by remap_constexpr_sampler(_by_binding).
bool is_msl_resource_binding_used(spv::ExecutionModel model, uint32_t set, uint32_t binding) const;
// This must only be called after a successful call to CompilerMSL::compile().
// For a variable resource ID obtained through reflection API, report the automatically assigned resource index.
// If the descriptor set was part of an argument buffer, report the [[id(N)]],
// or [[buffer/texture/sampler]] binding for other resources.
// If the resource was a combined image sampler, report the image binding here,
// use the _secondary version of this call to query the sampler half of the resource.
// If no binding exists, uint32_t(-1) is returned.
uint32_t get_automatic_msl_resource_binding(uint32_t id) const;
// Same as get_automatic_msl_resource_binding, but should only be used for combined image samplers, in which case the
// sampler's binding is returned instead. For any other resource type, -1 is returned.
// Secondary bindings are also used for the auxillary image atomic buffer.
uint32_t get_automatic_msl_resource_binding_secondary(uint32_t id) const;
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
// Same as get_automatic_msl_resource_binding, but should only be used for combined image samplers for multiplanar images,
// in which case the second plane's binding is returned instead. For any other resource type, -1 is returned.
uint32_t get_automatic_msl_resource_binding_tertiary(uint32_t id) const;
// Same as get_automatic_msl_resource_binding, but should only be used for combined image samplers for triplanar images,
// in which case the third plane's binding is returned instead. For any other resource type, -1 is returned.
uint32_t get_automatic_msl_resource_binding_quaternary(uint32_t id) const;
// Compiles the SPIR-V code into Metal Shading Language.
std::string compile() override;
// Remap a sampler with ID to a constexpr sampler.
// Older iOS targets must use constexpr samplers in certain cases (PCF),
// so a static sampler must be used.
// The sampler will not consume a binding, but be declared in the entry point as a constexpr sampler.
// This can be used on both combined image/samplers (sampler2D) or standalone samplers.
// The remapped sampler must not be an array of samplers.
// Prefer remap_constexpr_sampler_by_binding unless you're also doing reflection anyways.
void remap_constexpr_sampler(VariableID id, const MSLConstexprSampler &sampler);
// Same as remap_constexpr_sampler, except you provide set/binding, rather than variable ID.
// Remaps based on ID take priority over set/binding remaps.
void remap_constexpr_sampler_by_binding(uint32_t desc_set, uint32_t binding, const MSLConstexprSampler &sampler);
// If using CompilerMSL::Options::pad_fragment_output_components, override the number of components we expect
// to use for a particular location. The default is 4 if number of components is not overridden.
void set_fragment_output_components(uint32_t location, uint32_t components);
void set_combined_sampler_suffix(const char *suffix);
const char *get_combined_sampler_suffix() const;
protected:
// An enum of SPIR-V functions that are implemented in additional
// source code that is added to the shader if necessary.
enum SPVFuncImpl : uint8_t
{
SPVFuncImplNone,
SPVFuncImplMod,
SPVFuncImplRadians,
SPVFuncImplDegrees,
SPVFuncImplFindILsb,
SPVFuncImplFindSMsb,
SPVFuncImplFindUMsb,
SPVFuncImplSSign,
2018-09-11 10:58:03 +00:00
SPVFuncImplArrayCopyMultidimBase,
// Unfortunately, we cannot use recursive templates in the MSL compiler properly,
// so stamp out variants up to some arbitrary maximum.
SPVFuncImplArrayCopy = SPVFuncImplArrayCopyMultidimBase + 1,
SPVFuncImplArrayOfArrayCopy2Dim = SPVFuncImplArrayCopyMultidimBase + 2,
SPVFuncImplArrayOfArrayCopy3Dim = SPVFuncImplArrayCopyMultidimBase + 3,
SPVFuncImplArrayOfArrayCopy4Dim = SPVFuncImplArrayCopyMultidimBase + 4,
SPVFuncImplArrayOfArrayCopy5Dim = SPVFuncImplArrayCopyMultidimBase + 5,
SPVFuncImplArrayOfArrayCopy6Dim = SPVFuncImplArrayCopyMultidimBase + 6,
SPVFuncImplTexelBufferCoords,
SPVFuncImplImage2DAtomicCoords, // Emulate texture2D atomic operations
SPVFuncImplFMul,
SPVFuncImplFAdd,
SPVFuncImplFSub,
SPVFuncImplQuantizeToF16,
SPVFuncImplCubemapTo2DArrayFace,
SPVFuncImplUnsafeArray, // Allow Metal to use the array<T> template to make arrays a value type
SPVFuncImplStorageMatrix, // Allow threadgroup construction of matrices
SPVFuncImplInverse4x4,
SPVFuncImplInverse3x3,
SPVFuncImplInverse2x2,
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
// It is very important that this come before *Swizzle and ChromaReconstruct*, to ensure it's
// emitted before them.
SPVFuncImplForwardArgs,
// Likewise, this must come before *Swizzle.
SPVFuncImplGetSwizzle,
SPVFuncImplTextureSwizzle,
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
SPVFuncImplGatherSwizzle,
SPVFuncImplGatherCompareSwizzle,
SPVFuncImplSubgroupBroadcast,
SPVFuncImplSubgroupBroadcastFirst,
SPVFuncImplSubgroupBallot,
SPVFuncImplSubgroupBallotBitExtract,
SPVFuncImplSubgroupBallotFindLSB,
SPVFuncImplSubgroupBallotFindMSB,
SPVFuncImplSubgroupBallotBitCount,
SPVFuncImplSubgroupAllEqual,
SPVFuncImplSubgroupShuffle,
SPVFuncImplSubgroupShuffleXor,
SPVFuncImplSubgroupShuffleUp,
SPVFuncImplSubgroupShuffleDown,
SPVFuncImplQuadBroadcast,
SPVFuncImplQuadSwap,
SPVFuncImplReflectScalar,
SPVFuncImplRefractScalar,
SPVFuncImplFaceForwardScalar,
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
SPVFuncImplChromaReconstructNearest2Plane,
SPVFuncImplChromaReconstructNearest3Plane,
SPVFuncImplChromaReconstructLinear422CositedEven2Plane,
SPVFuncImplChromaReconstructLinear422CositedEven3Plane,
SPVFuncImplChromaReconstructLinear422Midpoint2Plane,
SPVFuncImplChromaReconstructLinear422Midpoint3Plane,
SPVFuncImplChromaReconstructLinear420XCositedEvenYCositedEven2Plane,
SPVFuncImplChromaReconstructLinear420XCositedEvenYCositedEven3Plane,
SPVFuncImplChromaReconstructLinear420XMidpointYCositedEven2Plane,
SPVFuncImplChromaReconstructLinear420XMidpointYCositedEven3Plane,
SPVFuncImplChromaReconstructLinear420XCositedEvenYMidpoint2Plane,
SPVFuncImplChromaReconstructLinear420XCositedEvenYMidpoint3Plane,
SPVFuncImplChromaReconstructLinear420XMidpointYMidpoint2Plane,
SPVFuncImplChromaReconstructLinear420XMidpointYMidpoint3Plane,
SPVFuncImplExpandITUFullRange,
SPVFuncImplExpandITUNarrowRange,
SPVFuncImplConvertYCbCrBT709,
SPVFuncImplConvertYCbCrBT601,
SPVFuncImplConvertYCbCrBT2020,
SPVFuncImplDynamicImageSampler,
};
2019-09-23 22:05:04 +00:00
// If the underlying resource has been used for comparison then duplicate loads of that resource must be too
// Use Metal's native frame-buffer fetch API for subpass inputs.
2020-06-04 13:50:28 +00:00
void emit_texture_op(const Instruction &i, bool sparse) override;
void emit_binary_ptr_op(uint32_t result_type, uint32_t result_id, uint32_t op0, uint32_t op1, const char *op);
std::string to_ptr_expression(uint32_t id, bool register_expression_read = true);
void emit_binary_unord_op(uint32_t result_type, uint32_t result_id, uint32_t op0, uint32_t op1, const char *op);
void emit_instruction(const Instruction &instr) override;
2016-11-12 09:04:50 +00:00
void emit_glsl_op(uint32_t result_type, uint32_t result_id, uint32_t op, const uint32_t *args,
uint32_t count) override;
void emit_spv_amd_shader_trinary_minmax_op(uint32_t result_type, uint32_t result_id, uint32_t op,
const uint32_t *args, uint32_t count) override;
void emit_header() override;
void emit_function_prototype(SPIRFunction &func, const Bitset &return_flags) override;
void emit_sampled_image_op(uint32_t result_type, uint32_t result_id, uint32_t image_id, uint32_t samp_id) override;
void emit_subgroup_op(const Instruction &i) override;
2020-06-04 13:50:28 +00:00
std::string to_texture_op(const Instruction &i, bool sparse, bool *forward,
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
SmallVector<uint32_t> &inherited_expressions) override;
void emit_fixup() override;
std::string to_struct_member(const SPIRType &type, uint32_t member_type_id, uint32_t index,
const std::string &qualifier = "");
void emit_struct_member(const SPIRType &type, uint32_t member_type_id, uint32_t index,
const std::string &qualifier = "", uint32_t base_offset = 0) override;
2019-07-22 08:23:39 +00:00
void emit_struct_padding_target(const SPIRType &type) override;
std::string type_to_glsl(const SPIRType &type, uint32_t id, bool member);
std::string type_to_glsl(const SPIRType &type, uint32_t id = 0) override;
2021-06-03 10:00:29 +00:00
void emit_block_hints(const SPIRBlock &block) override;
// Allow Metal to use the array<T> template to make arrays a value type
std::string type_to_array_glsl(const SPIRType &type) override;
std::string constant_op_expression(const SPIRConstantOp &cop) override;
// Threadgroup arrays can't have a wrapper type
std::string variable_decl(const SPIRVariable &variable) override;
bool variable_decl_is_remapped_storage(const SPIRVariable &variable, spv::StorageClass storage) const override;
// GCC workaround of lambdas calling protected functions (for older GCC versions)
std::string variable_decl(const SPIRType &type, const std::string &name, uint32_t id = 0) override;
std::string image_type_glsl(const SPIRType &type, uint32_t id = 0) override;
std::string sampler_type(const SPIRType &type, uint32_t id);
std::string builtin_to_glsl(spv::BuiltIn builtin, spv::StorageClass storage) override;
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
std::string to_func_call_arg(const SPIRFunction::Parameter &arg, uint32_t id) override;
std::string to_name(uint32_t id, bool allow_alias = true) const override;
std::string to_function_name(const TextureFunctionNameArguments &args) override;
std::string to_function_args(const TextureFunctionArguments &args, bool *p_forward) override;
std::string to_initializer_expression(const SPIRVariable &var) override;
std::string to_zero_initialized_expression(uint32_t type_id) override;
2019-09-23 22:05:04 +00:00
2019-07-23 10:23:41 +00:00
std::string unpack_expression_type(std::string expr_str, const SPIRType &type, uint32_t physical_type_id,
bool is_packed, bool row_major) override;
// Returns true for BuiltInSampleMask because gl_SampleMask[] is an array in SPIR-V, but [[sample_mask]] is a scalar in Metal.
bool builtin_translates_to_nonarray(spv::BuiltIn builtin) const override;
std::string bitcast_glsl_op(const SPIRType &result_type, const SPIRType &argument_type) override;
bool emit_complex_bitcast(uint32_t result_id, uint32_t id, uint32_t op0) override;
bool skip_argument(uint32_t id) const override;
std::string to_member_reference(uint32_t base, const SPIRType &type, uint32_t index, bool ptr_chain_is_resolved) override;
std::string to_qualifiers_glsl(uint32_t id) override;
void replace_illegal_names() override;
void declare_constant_arrays();
2019-09-23 22:05:04 +00:00
void replace_illegal_entry_point_names();
void sync_entry_point_aliases_and_names();
static const std::unordered_set<std::string> &get_reserved_keyword_set();
static const std::unordered_set<std::string> &get_illegal_func_names();
// Constant arrays of non-primitive types (i.e. matrices) won't link properly into Metal libraries
void declare_complex_constant_arrays();
2019-09-23 22:05:04 +00:00
bool is_patch_block(const SPIRType &type);
bool is_non_native_row_major_matrix(uint32_t id) override;
bool member_is_non_native_row_major_matrix(const SPIRType &type, uint32_t index) override;
2019-07-23 10:23:41 +00:00
std::string convert_row_major_matrix(std::string exp_str, const SPIRType &exp_type, uint32_t physical_type_id,
bool is_packed, bool relaxed) override;
bool is_tesc_shader() const;
bool is_tese_shader() const;
void preprocess_op_codes();
void localize_global_variables();
2016-10-24 13:24:24 +00:00
void extract_global_variables_from_functions();
void mark_packable_structs();
void mark_as_packable(SPIRType &type);
void mark_as_workgroup_struct(SPIRType &type);
2017-01-15 15:39:03 +00:00
std::unordered_map<uint32_t, std::set<uint32_t>> function_global_vars;
void extract_global_variables_from_function(uint32_t func_id, std::set<uint32_t> &added_arg_ids,
std::unordered_set<uint32_t> &global_var_ids,
std::unordered_set<uint32_t> &processed_func_ids);
uint32_t add_interface_block(spv::StorageClass storage, bool patch = false);
uint32_t add_interface_block_pointer(uint32_t ib_var_id, spv::StorageClass storage);
struct InterfaceBlockMeta
{
struct LocationMeta
{
uint32_t base_type_id = 0;
uint32_t num_components = 0;
bool flat = false;
bool noperspective = false;
bool centroid = false;
bool sample = false;
};
std::unordered_map<uint32_t, LocationMeta> location_meta;
bool strip_array = false;
bool allow_local_declaration = false;
};
std::string to_tesc_invocation_id();
void emit_local_masked_variable(const SPIRVariable &masked_var, bool strip_array);
void add_variable_to_interface_block(spv::StorageClass storage, const std::string &ib_var_ref, SPIRType &ib_type,
SPIRVariable &var, InterfaceBlockMeta &meta);
void add_composite_variable_to_interface_block(spv::StorageClass storage, const std::string &ib_var_ref,
SPIRType &ib_type, SPIRVariable &var, InterfaceBlockMeta &meta);
void add_plain_variable_to_interface_block(spv::StorageClass storage, const std::string &ib_var_ref,
SPIRType &ib_type, SPIRVariable &var, InterfaceBlockMeta &meta);
bool add_component_variable_to_interface_block(spv::StorageClass storage, const std::string &ib_var_ref,
SPIRVariable &var, const SPIRType &type,
InterfaceBlockMeta &meta);
MSL: Support input/output blocks containing nested struct arrays Fixes numerous CTS tests of types dEQP-VK.pipeline.interface_matching.vector_length.member_of_*, passing complex nested structs between stages as stage I/O. - Make add_composite_member_variable_to_interface_block() recursive to allow struct members to contain nested structs, building up member names and access chains recursively, and only add the resulting flattened leaf members to the synthetic input and output interface blocks. - Recursively generate individual location numbers for the flattened members of the input/output block. - Replace to_qualified_member_name() with append_member_name(). - Update add_variable_to_interface_block() to support arrays as struct members, adding a member to input and output interface blocks for each element of the array. - Pass name qualifiers to add_plain_member_variable_to_interface_block() to allow struct members to be arrays of structs, building up member names and access chains, and adding multiple distinct flattened leaf members to the synthetic input and output interface blocks. - Generate individual location numbers for the individual array members of the input/output block. - SPIRVCrossDecorationInterfaceMemberIndex references the index of a member of a variable that is a struct type. The value is relative to the variable, and for structs nested within that top-level struct, the index value needs to take into consideration the members within those nested structs. - Pass var_mbr_idx to add_plain_member_variable_to_interface_block() and add_composite_member_variable_to_interface_block(), start at zero for each variable, and increment for each member or nested member within that variable. - Add unit test shaders-msl/vert/out-block-with-nested-struct-array.vert - Add unit test shaders-msl/vert/out-block-with-struct-array.vert - Add unit test shaders-msl/tese/in-block-with-nested-struct.tese
2022-02-26 00:58:22 +00:00
void add_plain_member_variable_to_interface_block(spv::StorageClass storage,
2022-03-03 09:22:18 +00:00
const std::string &ib_var_ref, SPIRType &ib_type,
SPIRVariable &var, SPIRType &var_type,
uint32_t mbr_idx, InterfaceBlockMeta &meta,
const std::string &mbr_name_qual,
const std::string &var_chain_qual,
uint32_t &location, uint32_t &var_mbr_idx);
MSL: Support input/output blocks containing nested struct arrays Fixes numerous CTS tests of types dEQP-VK.pipeline.interface_matching.vector_length.member_of_*, passing complex nested structs between stages as stage I/O. - Make add_composite_member_variable_to_interface_block() recursive to allow struct members to contain nested structs, building up member names and access chains recursively, and only add the resulting flattened leaf members to the synthetic input and output interface blocks. - Recursively generate individual location numbers for the flattened members of the input/output block. - Replace to_qualified_member_name() with append_member_name(). - Update add_variable_to_interface_block() to support arrays as struct members, adding a member to input and output interface blocks for each element of the array. - Pass name qualifiers to add_plain_member_variable_to_interface_block() to allow struct members to be arrays of structs, building up member names and access chains, and adding multiple distinct flattened leaf members to the synthetic input and output interface blocks. - Generate individual location numbers for the individual array members of the input/output block. - SPIRVCrossDecorationInterfaceMemberIndex references the index of a member of a variable that is a struct type. The value is relative to the variable, and for structs nested within that top-level struct, the index value needs to take into consideration the members within those nested structs. - Pass var_mbr_idx to add_plain_member_variable_to_interface_block() and add_composite_member_variable_to_interface_block(), start at zero for each variable, and increment for each member or nested member within that variable. - Add unit test shaders-msl/vert/out-block-with-nested-struct-array.vert - Add unit test shaders-msl/vert/out-block-with-struct-array.vert - Add unit test shaders-msl/tese/in-block-with-nested-struct.tese
2022-02-26 00:58:22 +00:00
void add_composite_member_variable_to_interface_block(spv::StorageClass storage,
2022-03-03 09:22:18 +00:00
const std::string &ib_var_ref, SPIRType &ib_type,
SPIRVariable &var, SPIRType &var_type,
uint32_t mbr_idx, InterfaceBlockMeta &meta,
const std::string &mbr_name_qual,
const std::string &var_chain_qual,
uint32_t &location, uint32_t &var_mbr_idx);
void add_tess_level_input_to_interface_block(const std::string &ib_var_ref, SPIRType &ib_type, SPIRVariable &var);
void add_tess_level_input(const std::string &base_ref, const std::string &mbr_name, SPIRVariable &var);
void fix_up_interface_member_indices(spv::StorageClass storage, uint32_t ib_type_id);
void mark_location_as_used_by_shader(uint32_t location, const SPIRType &type,
spv::StorageClass storage, bool fallback = false);
uint32_t ensure_correct_builtin_type(uint32_t type_id, spv::BuiltIn builtin);
uint32_t ensure_correct_input_type(uint32_t type_id, uint32_t location, uint32_t component,
uint32_t num_components, bool strip_array);
2017-01-15 15:39:03 +00:00
void emit_custom_templates();
void emit_custom_functions();
void emit_resources();
void emit_specialization_constants_and_structs();
void emit_interface_block(uint32_t ib_var_id);
bool maybe_emit_array_assignment(uint32_t id_lhs, uint32_t id_rhs);
uint32_t get_resource_array_size(uint32_t id) const;
void fix_up_shader_inputs_outputs();
std::string func_type_decl(SPIRType &type);
std::string entry_point_args_classic(bool append_comma);
std::string entry_point_args_argument_buffer(bool append_comma);
std::string entry_point_arg_stage_in();
void entry_point_args_builtin(std::string &args);
void entry_point_args_discrete_descriptors(std::string &args);
std::string append_member_name(const std::string &qualifier, const SPIRType &type, uint32_t index);
std::string ensure_valid_name(std::string name, std::string pfx);
std::string to_sampler_expression(uint32_t id);
std::string to_swizzle_expression(uint32_t id);
std::string to_buffer_size_expression(uint32_t id);
bool is_sample_rate() const;
bool is_intersection_query() const;
bool is_direct_input_builtin(spv::BuiltIn builtin);
std::string builtin_qualifier(spv::BuiltIn builtin);
std::string builtin_type_decl(spv::BuiltIn builtin, uint32_t id = 0);
std::string built_in_func_arg(spv::BuiltIn builtin, bool prefix_comma);
std::string member_attribute_qualifier(const SPIRType &type, uint32_t index);
std::string member_location_attribute_qualifier(const SPIRType &type, uint32_t index);
std::string argument_decl(const SPIRFunction::Parameter &arg);
const char *descriptor_address_space(uint32_t id, spv::StorageClass storage, const char *plain_address_space) const;
std::string round_fp_tex_coords(std::string tex_coords, bool coord_is_fp);
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
uint32_t get_metal_resource_index(SPIRVariable &var, SPIRType::BaseType basetype, uint32_t plane = 0);
uint32_t get_member_location(uint32_t type_id, uint32_t index, uint32_t *comp = nullptr) const;
uint32_t get_or_allocate_builtin_input_member_location(spv::BuiltIn builtin,
uint32_t type_id, uint32_t index, uint32_t *comp = nullptr);
uint32_t get_or_allocate_builtin_output_member_location(spv::BuiltIn builtin,
uint32_t type_id, uint32_t index, uint32_t *comp = nullptr);
uint32_t get_physical_tess_level_array_size(spv::BuiltIn builtin) const;
// MSL packing rules. These compute the effective packing rules as observed by the MSL compiler in the MSL output.
// These values can change depending on various extended decorations which control packing rules.
// We need to make these rules match up with SPIR-V declared rules.
uint32_t get_declared_type_size_msl(const SPIRType &type, bool packed, bool row_major) const;
uint32_t get_declared_type_array_stride_msl(const SPIRType &type, bool packed, bool row_major) const;
uint32_t get_declared_type_matrix_stride_msl(const SPIRType &type, bool packed, bool row_major) const;
uint32_t get_declared_type_alignment_msl(const SPIRType &type, bool packed, bool row_major) const;
uint32_t get_declared_struct_member_size_msl(const SPIRType &struct_type, uint32_t index) const;
uint32_t get_declared_struct_member_array_stride_msl(const SPIRType &struct_type, uint32_t index) const;
uint32_t get_declared_struct_member_matrix_stride_msl(const SPIRType &struct_type, uint32_t index) const;
uint32_t get_declared_struct_member_alignment_msl(const SPIRType &struct_type, uint32_t index) const;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
uint32_t get_declared_input_size_msl(const SPIRType &struct_type, uint32_t index) const;
uint32_t get_declared_input_array_stride_msl(const SPIRType &struct_type, uint32_t index) const;
uint32_t get_declared_input_matrix_stride_msl(const SPIRType &struct_type, uint32_t index) const;
uint32_t get_declared_input_alignment_msl(const SPIRType &struct_type, uint32_t index) const;
const SPIRType &get_physical_member_type(const SPIRType &struct_type, uint32_t index) const;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
SPIRType get_presumed_input_type(const SPIRType &struct_type, uint32_t index) const;
2019-07-23 10:23:41 +00:00
uint32_t get_declared_struct_size_msl(const SPIRType &struct_type, bool ignore_alignment = false,
bool ignore_padding = false) const;
std::string to_component_argument(uint32_t id);
void align_struct(SPIRType &ib_type, std::unordered_set<uint32_t> &aligned_structs);
void mark_scalar_layout_structs(const SPIRType &ib_type);
void mark_struct_members_packed(const SPIRType &type);
void ensure_member_packing_rules_msl(SPIRType &ib_type, uint32_t index);
bool validate_member_packing_rules_msl(const SPIRType &type, uint32_t index) const;
std::string get_argument_address_space(const SPIRVariable &argument);
std::string get_type_address_space(const SPIRType &type, uint32_t id, bool argument = false);
const char *to_restrict(uint32_t id, bool space);
SPIRType &get_stage_in_struct_type();
SPIRType &get_stage_out_struct_type();
SPIRType &get_patch_stage_in_struct_type();
SPIRType &get_patch_stage_out_struct_type();
std::string get_tess_factor_struct_name();
SPIRType &get_uint_type();
uint32_t get_uint_type_id();
void emit_atomic_func_op(uint32_t result_type, uint32_t result_id, const char *op, spv::Op opcode,
uint32_t mem_order_1, uint32_t mem_order_2, bool has_mem_order_2, uint32_t op0, uint32_t op1 = 0,
2018-09-13 13:56:23 +00:00
bool op1_is_pointer = false, bool op1_is_literal = false, uint32_t op2 = 0);
const char *get_memory_order(uint32_t spv_mem_sem);
void add_pragma_line(const std::string &line);
void add_typedef_line(const std::string &line);
void emit_barrier(uint32_t id_exe_scope, uint32_t id_mem_scope, uint32_t id_mem_sem);
bool emit_array_copy(const char *expr, uint32_t lhs_id, uint32_t rhs_id,
spv::StorageClass lhs_storage, spv::StorageClass rhs_storage) override;
2018-02-09 10:27:23 +00:00
void build_implicit_builtins();
uint32_t build_constant_uint_array_pointer();
void emit_entry_point_declarations() override;
bool uses_explicit_early_fragment_test();
uint32_t builtin_frag_coord_id = 0;
uint32_t builtin_sample_id_id = 0;
uint32_t builtin_sample_mask_id = 0;
uint32_t builtin_helper_invocation_id = 0;
uint32_t builtin_vertex_idx_id = 0;
uint32_t builtin_base_vertex_id = 0;
uint32_t builtin_instance_idx_id = 0;
uint32_t builtin_base_instance_id = 0;
uint32_t builtin_view_idx_id = 0;
uint32_t builtin_layer_id = 0;
uint32_t builtin_invocation_id_id = 0;
uint32_t builtin_primitive_id_id = 0;
uint32_t builtin_subgroup_invocation_id_id = 0;
uint32_t builtin_subgroup_size_id = 0;
uint32_t builtin_dispatch_base_id = 0;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
uint32_t builtin_stage_input_size_id = 0;
uint32_t builtin_local_invocation_index_id = 0;
uint32_t builtin_workgroup_size_id = 0;
uint32_t swizzle_buffer_id = 0;
uint32_t buffer_size_buffer_id = 0;
uint32_t view_mask_buffer_id = 0;
uint32_t dynamic_offsets_buffer_id = 0;
uint32_t uint_type_id = 0;
uint32_t argument_buffer_padding_buffer_type_id = 0;
uint32_t argument_buffer_padding_image_type_id = 0;
uint32_t argument_buffer_padding_sampler_type_id = 0;
bool does_shader_write_sample_mask = false;
bool frag_shader_needs_discard_checks = false;
void cast_to_variable_store(uint32_t target_id, std::string &expr, const SPIRType &expr_type) override;
void cast_from_variable_load(uint32_t source_id, std::string &expr, const SPIRType &expr_type) override;
void emit_store_statement(uint32_t lhs_expression, uint32_t rhs_expression) override;
void analyze_sampled_image_usage();
bool access_chain_needs_stage_io_builtin_translation(uint32_t base) override;
void prepare_access_chain_for_scalar_access(std::string &expr, const SPIRType &type, spv::StorageClass storage,
bool &is_packed) override;
MSL: Support pull-model interpolation on MSL 2.3+. New in MSL 2.3 is a template that can be used in the place of a scalar type in a stage-in struct. This template has methods which interpolate the varying at the given points. Curiously, you can't set interpolation attributes on such a varying; perspective-correctness is encoded in the type, while interpolation must be done using one of the methods. This makes using this somewhat awkward from SPIRV-Cross, requiring us to jump through a bunch of hoops to make this all work. Using varyings from functions in particular is a pain point, requiring us to pass the stage-in struct itself around. An alternative is to pass references to the interpolants; except this will fall over badly with composite types, which naturally must be flattened. As with tessellation, dynamic indexing isn't supported with pull-model interpolation. This is because of the need to reference the original struct member in order to call one of the pull-model interpolation methods on it. Also, this is done at the variable level; this means that if one varying in a struct is used with the pull-model functions, then the entire struct is emitted as pull-model interpolants. For some reason, this was not documented in the MSL spec, though there is a property on `MTLDevice`, `supportsPullModelInterpolation`, indicating support for this, which *is* documented. This does not appear to be implemented yet for AMD: it returns `NO` from `supportsPullModelInterpolation`, and pipelines with shaders using the templates fail to compile. It *is* implemeted for Intel. It's probably also implemented for Apple GPUs: on Apple Silicon, OpenGL calls down to Metal, and it wouldn't be possible to use the interpolation functions without this implemented in Metal. Based on my testing, where SPIR-V and GLSL have the offset relative to the pixel center, in Metal it appears to be relative to the pixel's upper-left corner, as in HLSL. Therefore, I've added an offset 0.4375, i.e. one half minus one sixteenth, to all arguments to `interpolate_at_offset()`. This also fixes a long-standing bug: if a pull-model interpolation function is used on a varying, make sure that varying is declared. We were already doing this only for the AMD pull-model function, `interpolateAtVertexAMD()`; for reasons which are completely beyond me, we weren't doing this for the base interpolation functions. I also note that there are no tests for the interpolation functions for GLSL or HLSL.
2020-11-03 02:56:46 +00:00
void fix_up_interpolant_access_chain(const uint32_t *ops, uint32_t length);
void check_physical_type_cast(std::string &expr, const SPIRType *type, uint32_t physical_type) override;
bool emit_tessellation_access_chain(const uint32_t *ops, uint32_t length);
bool emit_tessellation_io_load(uint32_t result_type, uint32_t id, uint32_t ptr);
bool is_out_of_bounds_tessellation_level(uint32_t id_lhs);
void ensure_builtin(spv::StorageClass storage, spv::BuiltIn builtin);
2019-09-23 22:05:04 +00:00
void mark_implicit_builtin(spv::StorageClass storage, spv::BuiltIn builtin, uint32_t id);
std::string convert_to_f32(const std::string &expr, uint32_t components);
Options msl_options;
std::set<SPVFuncImpl> spv_function_implementations;
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
// Must be ordered to ensure declarations are in a specific order.
std::map<LocationComponentPair, MSLShaderInterfaceVariable> inputs_by_location;
std::unordered_map<uint32_t, MSLShaderInterfaceVariable> inputs_by_builtin;
std::map<LocationComponentPair, MSLShaderInterfaceVariable> outputs_by_location;
std::unordered_map<uint32_t, MSLShaderInterfaceVariable> outputs_by_builtin;
std::unordered_set<uint32_t> location_inputs_in_use;
std::unordered_set<uint32_t> location_inputs_in_use_fallback;
std::unordered_set<uint32_t> location_outputs_in_use;
std::unordered_set<uint32_t> location_outputs_in_use_fallback;
std::unordered_map<uint32_t, uint32_t> fragment_output_components;
std::unordered_map<uint32_t, uint32_t> builtin_to_automatic_input_location;
std::unordered_map<uint32_t, uint32_t> builtin_to_automatic_output_location;
std::set<std::string> pragma_lines;
std::set<std::string> typedef_lines;
SmallVector<uint32_t> vars_needing_early_declaration;
std::unordered_map<StageSetBinding, std::pair<MSLResourceBinding, bool>, InternalHasher> resource_bindings;
std::unordered_map<StageSetBinding, uint32_t, InternalHasher> resource_arg_buff_idx_to_binding_number;
uint32_t next_metal_resource_index_buffer = 0;
uint32_t next_metal_resource_index_texture = 0;
uint32_t next_metal_resource_index_sampler = 0;
// Intentionally uninitialized, works around MSVC 2013 bug.
uint32_t next_metal_resource_ids[kMaxArgumentBuffers];
VariableID stage_in_var_id = 0;
VariableID stage_out_var_id = 0;
VariableID patch_stage_in_var_id = 0;
VariableID patch_stage_out_var_id = 0;
VariableID stage_in_ptr_var_id = 0;
VariableID stage_out_ptr_var_id = 0;
VariableID tess_level_inner_var_id = 0;
VariableID tess_level_outer_var_id = 0;
VariableID stage_out_masked_builtin_type_id = 0;
// Handle HLSL-style 0-based vertex/instance index.
enum class TriState
{
2019-10-28 11:55:14 +00:00
Neutral,
No,
Yes
};
TriState needs_base_vertex_arg = TriState::Neutral;
TriState needs_base_instance_arg = TriState::Neutral;
bool has_sampled_images = false;
bool builtin_declaration = false; // Handle HLSL-style 0-based vertex/instance index.
bool is_using_builtin_array = false; // Force the use of C style array declaration.
bool using_builtin_array() const;
bool is_rasterization_disabled = false;
bool capture_output_to_buffer = false;
bool needs_swizzle_buffer_def = false;
bool used_swizzle_buffer = false;
bool added_builtin_tess_level = false;
bool needs_subgroup_invocation_id = false;
bool needs_subgroup_size = false;
MSL: Support pull-model interpolation on MSL 2.3+. New in MSL 2.3 is a template that can be used in the place of a scalar type in a stage-in struct. This template has methods which interpolate the varying at the given points. Curiously, you can't set interpolation attributes on such a varying; perspective-correctness is encoded in the type, while interpolation must be done using one of the methods. This makes using this somewhat awkward from SPIRV-Cross, requiring us to jump through a bunch of hoops to make this all work. Using varyings from functions in particular is a pain point, requiring us to pass the stage-in struct itself around. An alternative is to pass references to the interpolants; except this will fall over badly with composite types, which naturally must be flattened. As with tessellation, dynamic indexing isn't supported with pull-model interpolation. This is because of the need to reference the original struct member in order to call one of the pull-model interpolation methods on it. Also, this is done at the variable level; this means that if one varying in a struct is used with the pull-model functions, then the entire struct is emitted as pull-model interpolants. For some reason, this was not documented in the MSL spec, though there is a property on `MTLDevice`, `supportsPullModelInterpolation`, indicating support for this, which *is* documented. This does not appear to be implemented yet for AMD: it returns `NO` from `supportsPullModelInterpolation`, and pipelines with shaders using the templates fail to compile. It *is* implemeted for Intel. It's probably also implemented for Apple GPUs: on Apple Silicon, OpenGL calls down to Metal, and it wouldn't be possible to use the interpolation functions without this implemented in Metal. Based on my testing, where SPIR-V and GLSL have the offset relative to the pixel center, in Metal it appears to be relative to the pixel's upper-left corner, as in HLSL. Therefore, I've added an offset 0.4375, i.e. one half minus one sixteenth, to all arguments to `interpolate_at_offset()`. This also fixes a long-standing bug: if a pull-model interpolation function is used on a varying, make sure that varying is declared. We were already doing this only for the AMD pull-model function, `interpolateAtVertexAMD()`; for reasons which are completely beyond me, we weren't doing this for the base interpolation functions. I also note that there are no tests for the interpolation functions for GLSL or HLSL.
2020-11-03 02:56:46 +00:00
bool needs_sample_id = false;
bool needs_helper_invocation = false;
std::string qual_pos_var_name;
std::string stage_in_var_name = "in";
std::string stage_out_var_name = "out";
std::string patch_stage_in_var_name = "patchIn";
std::string patch_stage_out_var_name = "patchOut";
std::string sampler_name_suffix = "Smplr";
std::string swizzle_name_suffix = "Swzl";
std::string buffer_size_name_suffix = "BufferSize";
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
std::string plane_name_suffix = "Plane";
std::string input_wg_var_name = "gl_in";
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
std::string input_buffer_var_name = "spvIn";
std::string output_buffer_var_name = "spvOut";
std::string patch_input_buffer_var_name = "spvPatchIn";
std::string patch_output_buffer_var_name = "spvPatchOut";
std::string tess_factor_buffer_var_name = "spvTessLevel";
MSL: Add support for processing more than one patch per workgroup. This should hopefully reduce underutilization of the GPU, especially on GPUs where the thread execution width is greater than the number of control points. This also simplifies initialization by reading the buffer directly instead of using Metal's vertex-attribute-in-compute support. It turns out the only way in which shader stages are allowed to differ in their interfaces is in the number of components per vector; the base type must be the same. Since we are using the raw buffer instead of attributes, we can now also emit arrays and matrices directly into the buffer, instead of flattening them and then unpacking them. Structs are still flattened, however; this is due to the need to handle vectors with fewer components than were output, and I think handling this while also directly emitting structs could get ugly. Another advantage of this scheme is that the extra invocations needed to read the attributes when there were more input than output points are now no more. The number of threads per workgroup is now lcm(SIMD-size, output control points). This should ensure we always process a whole number of patches per workgroup. To avoid complexity handling indices in the tessellation control shader, I've also changed the way vertex shaders for tessellation are handled. They are now compute kernels using Metal's support for vertex-style stage input. This lets us always emit vertices into the buffer in order of vertex shader execution. Now we no longer have to deal with indexing in the tessellation control shader. This also fixes a long-standing issue where if an index were greater than the number of vertices to draw, the vertex shader would wind up writing outside the buffer, and the vertex would be lost. This is a breaking change, and I know SPIRV-Cross has other clients, so I've hidden this behind an option for now. In the future, I want to remove this option and make it the default.
2020-02-21 03:38:28 +00:00
std::string index_buffer_var_name = "spvIndices";
spv::Op previous_instruction_opcode = spv::OpNop;
// Must be ordered since declaration is in a specific order.
std::map<uint32_t, MSLConstexprSampler> constexpr_samplers_by_id;
std::unordered_map<SetBindingPair, MSLConstexprSampler, InternalHasher> constexpr_samplers_by_binding;
const MSLConstexprSampler *find_constexpr_sampler(uint32_t id) const;
std::unordered_set<uint32_t> buffers_requiring_array_length;
SmallVector<uint32_t> buffer_arrays_discrete;
SmallVector<std::pair<uint32_t, uint32_t>> buffer_aliases_argument;
SmallVector<uint32_t> buffer_aliases_discrete;
std::unordered_set<uint32_t> atomic_image_vars; // Emulate texture2D atomic operations
MSL: Support pull-model interpolation on MSL 2.3+. New in MSL 2.3 is a template that can be used in the place of a scalar type in a stage-in struct. This template has methods which interpolate the varying at the given points. Curiously, you can't set interpolation attributes on such a varying; perspective-correctness is encoded in the type, while interpolation must be done using one of the methods. This makes using this somewhat awkward from SPIRV-Cross, requiring us to jump through a bunch of hoops to make this all work. Using varyings from functions in particular is a pain point, requiring us to pass the stage-in struct itself around. An alternative is to pass references to the interpolants; except this will fall over badly with composite types, which naturally must be flattened. As with tessellation, dynamic indexing isn't supported with pull-model interpolation. This is because of the need to reference the original struct member in order to call one of the pull-model interpolation methods on it. Also, this is done at the variable level; this means that if one varying in a struct is used with the pull-model functions, then the entire struct is emitted as pull-model interpolants. For some reason, this was not documented in the MSL spec, though there is a property on `MTLDevice`, `supportsPullModelInterpolation`, indicating support for this, which *is* documented. This does not appear to be implemented yet for AMD: it returns `NO` from `supportsPullModelInterpolation`, and pipelines with shaders using the templates fail to compile. It *is* implemeted for Intel. It's probably also implemented for Apple GPUs: on Apple Silicon, OpenGL calls down to Metal, and it wouldn't be possible to use the interpolation functions without this implemented in Metal. Based on my testing, where SPIR-V and GLSL have the offset relative to the pixel center, in Metal it appears to be relative to the pixel's upper-left corner, as in HLSL. Therefore, I've added an offset 0.4375, i.e. one half minus one sixteenth, to all arguments to `interpolate_at_offset()`. This also fixes a long-standing bug: if a pull-model interpolation function is used on a varying, make sure that varying is declared. We were already doing this only for the AMD pull-model function, `interpolateAtVertexAMD()`; for reasons which are completely beyond me, we weren't doing this for the base interpolation functions. I also note that there are no tests for the interpolation functions for GLSL or HLSL.
2020-11-03 02:56:46 +00:00
std::unordered_set<uint32_t> pull_model_inputs;
// Must be ordered since array is in a specific order.
std::map<SetBindingPair, std::pair<uint32_t, uint32_t>> buffers_requiring_dynamic_offset;
SmallVector<uint32_t> disabled_frag_outputs;
std::unordered_set<SetBindingPair, InternalHasher> inline_uniform_blocks;
uint32_t argument_buffer_ids[kMaxArgumentBuffers];
uint32_t argument_buffer_discrete_mask = 0;
uint32_t argument_buffer_device_storage_mask = 0;
void analyze_argument_buffers();
bool descriptor_set_is_argument_buffer(uint32_t desc_set) const;
MSLResourceBinding &get_argument_buffer_resource(uint32_t desc_set, uint32_t arg_idx);
void add_argument_buffer_padding_buffer_type(SPIRType &struct_type, uint32_t &mbr_idx, uint32_t &arg_buff_index, MSLResourceBinding &rez_bind);
void add_argument_buffer_padding_image_type(SPIRType &struct_type, uint32_t &mbr_idx, uint32_t &arg_buff_index, MSLResourceBinding &rez_bind);
void add_argument_buffer_padding_sampler_type(SPIRType &struct_type, uint32_t &mbr_idx, uint32_t &arg_buff_index, MSLResourceBinding &rez_bind);
void add_argument_buffer_padding_type(uint32_t mbr_type_id, SPIRType &struct_type, uint32_t &mbr_idx, uint32_t &arg_buff_index, uint32_t count);
uint32_t get_target_components_for_fragment_location(uint32_t location) const;
2020-07-01 09:42:58 +00:00
uint32_t build_extended_vector_type(uint32_t type_id, uint32_t components,
SPIRType::BaseType basetype = SPIRType::Unknown);
MSL: Support pull-model interpolation on MSL 2.3+. New in MSL 2.3 is a template that can be used in the place of a scalar type in a stage-in struct. This template has methods which interpolate the varying at the given points. Curiously, you can't set interpolation attributes on such a varying; perspective-correctness is encoded in the type, while interpolation must be done using one of the methods. This makes using this somewhat awkward from SPIRV-Cross, requiring us to jump through a bunch of hoops to make this all work. Using varyings from functions in particular is a pain point, requiring us to pass the stage-in struct itself around. An alternative is to pass references to the interpolants; except this will fall over badly with composite types, which naturally must be flattened. As with tessellation, dynamic indexing isn't supported with pull-model interpolation. This is because of the need to reference the original struct member in order to call one of the pull-model interpolation methods on it. Also, this is done at the variable level; this means that if one varying in a struct is used with the pull-model functions, then the entire struct is emitted as pull-model interpolants. For some reason, this was not documented in the MSL spec, though there is a property on `MTLDevice`, `supportsPullModelInterpolation`, indicating support for this, which *is* documented. This does not appear to be implemented yet for AMD: it returns `NO` from `supportsPullModelInterpolation`, and pipelines with shaders using the templates fail to compile. It *is* implemeted for Intel. It's probably also implemented for Apple GPUs: on Apple Silicon, OpenGL calls down to Metal, and it wouldn't be possible to use the interpolation functions without this implemented in Metal. Based on my testing, where SPIR-V and GLSL have the offset relative to the pixel center, in Metal it appears to be relative to the pixel's upper-left corner, as in HLSL. Therefore, I've added an offset 0.4375, i.e. one half minus one sixteenth, to all arguments to `interpolate_at_offset()`. This also fixes a long-standing bug: if a pull-model interpolation function is used on a varying, make sure that varying is declared. We were already doing this only for the AMD pull-model function, `interpolateAtVertexAMD()`; for reasons which are completely beyond me, we weren't doing this for the base interpolation functions. I also note that there are no tests for the interpolation functions for GLSL or HLSL.
2020-11-03 02:56:46 +00:00
uint32_t build_msl_interpolant_type(uint32_t type_id, bool is_noperspective);
bool suppress_missing_prototypes = false;
MSL: Add support for sampler Y'CbCr conversion. This change introduces functions and in one case, a class, to support the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of GBGR8 and BGRG8 formats, for which Metal natively supports implicit chroma reconstruction, we're on our own here. We have to do everything ourselves. Much of the complexity comes from the need to support multiple planes, which must now be passed to functions that use the corresponding combined image-samplers. The rest is from the actual Y'CbCr conversion itself, which requires additional post-processing of the sample retrieved from the image. Passing sampled images to a function was a particular problem. To support this, I've added a new class which is emitted to MSL shaders that pass sampled images with Y'CbCr conversions attached around. It can handle sampled images with or without Y'CbCr conversion. This is an awful abomination that should not exist, but I'm worried that there's some shader out there which does this. This support requires Metal 2.0 to work properly, because it uses default-constructed texture objects, which were only added in MSL 2. I'm not even going to get into arrays of combined image-samplers--that's a whole other can of worms. They are deliberately unsupported in this change. I've taken the liberty of refactoring the support for texture swizzling while I'm at it. It's now treated as a post-processing step similar to Y'CbCr conversion. I'd like to think this is cleaner than having everything in `to_function_name()`/`to_function_args()`. It still looks really hairy, though. I did, however, get rid of the explicit type arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`. Update the C API. In addition to supporting this new functionality, add some compiler options that I added in previous changes, but for which I neglected to update the C API.
2019-08-02 20:11:19 +00:00
void add_spv_func_and_recompile(SPVFuncImpl spv_func);
void activate_argument_buffer_resources();
bool type_is_msl_framebuffer_fetch(const SPIRType &type) const;
bool type_is_pointer(const SPIRType &type) const;
bool type_is_pointer_to_pointer(const SPIRType &type) const;
bool is_supported_argument_buffer_type(const SPIRType &type) const;
bool variable_storage_requires_stage_io(spv::StorageClass storage) const;
bool needs_manual_helper_invocation_updates() const
{
return msl_options.manual_helper_invocation_updates && msl_options.supports_msl_version(2, 3);
}
bool needs_frag_discard_checks() const
{
return get_execution_model() == spv::ExecutionModelFragment && msl_options.supports_msl_version(2, 3) &&
msl_options.check_discarded_frag_stores && frag_shader_needs_discard_checks;
}
bool has_additional_fixed_sample_mask() const { return msl_options.additional_fixed_sample_mask != 0xffffffff; }
std::string additional_fixed_sample_mask_str() const;
// OpcodeHandler that handles several MSL preprocessing operations.
2017-01-20 16:33:59 +00:00
struct OpCodePreprocessor : OpcodeHandler
{
2017-01-20 16:33:59 +00:00
OpCodePreprocessor(CompilerMSL &compiler_)
: compiler(compiler_)
{
}
bool handle(spv::Op opcode, const uint32_t *args, uint32_t length) override;
CompilerMSL::SPVFuncImpl get_spv_func_impl(spv::Op opcode, const uint32_t *args);
void check_resource_write(uint32_t var_id);
2017-01-20 16:33:59 +00:00
CompilerMSL &compiler;
std::unordered_map<uint32_t, uint32_t> result_types;
std::unordered_map<uint32_t, uint32_t> image_pointers; // Emulate texture2D atomic operations
2017-01-20 16:33:59 +00:00
bool suppress_missing_prototypes = false;
bool uses_atomics = false;
bool uses_image_write = false;
bool uses_buffer_write = false;
bool uses_discard = false;
bool needs_subgroup_invocation_id = false;
bool needs_subgroup_size = false;
MSL: Support pull-model interpolation on MSL 2.3+. New in MSL 2.3 is a template that can be used in the place of a scalar type in a stage-in struct. This template has methods which interpolate the varying at the given points. Curiously, you can't set interpolation attributes on such a varying; perspective-correctness is encoded in the type, while interpolation must be done using one of the methods. This makes using this somewhat awkward from SPIRV-Cross, requiring us to jump through a bunch of hoops to make this all work. Using varyings from functions in particular is a pain point, requiring us to pass the stage-in struct itself around. An alternative is to pass references to the interpolants; except this will fall over badly with composite types, which naturally must be flattened. As with tessellation, dynamic indexing isn't supported with pull-model interpolation. This is because of the need to reference the original struct member in order to call one of the pull-model interpolation methods on it. Also, this is done at the variable level; this means that if one varying in a struct is used with the pull-model functions, then the entire struct is emitted as pull-model interpolants. For some reason, this was not documented in the MSL spec, though there is a property on `MTLDevice`, `supportsPullModelInterpolation`, indicating support for this, which *is* documented. This does not appear to be implemented yet for AMD: it returns `NO` from `supportsPullModelInterpolation`, and pipelines with shaders using the templates fail to compile. It *is* implemeted for Intel. It's probably also implemented for Apple GPUs: on Apple Silicon, OpenGL calls down to Metal, and it wouldn't be possible to use the interpolation functions without this implemented in Metal. Based on my testing, where SPIR-V and GLSL have the offset relative to the pixel center, in Metal it appears to be relative to the pixel's upper-left corner, as in HLSL. Therefore, I've added an offset 0.4375, i.e. one half minus one sixteenth, to all arguments to `interpolate_at_offset()`. This also fixes a long-standing bug: if a pull-model interpolation function is used on a varying, make sure that varying is declared. We were already doing this only for the AMD pull-model function, `interpolateAtVertexAMD()`; for reasons which are completely beyond me, we weren't doing this for the base interpolation functions. I also note that there are no tests for the interpolation functions for GLSL or HLSL.
2020-11-03 02:56:46 +00:00
bool needs_sample_id = false;
bool needs_helper_invocation = false;
};
// OpcodeHandler that scans for uses of sampled images
struct SampledImageScanner : OpcodeHandler
{
SampledImageScanner(CompilerMSL &compiler_)
: compiler(compiler_)
{
}
bool handle(spv::Op opcode, const uint32_t *args, uint32_t) override;
CompilerMSL &compiler;
};
// Sorts the members of a SPIRType and associated Meta info based on a settable sorting
// aspect, which defines which aspect of the struct members will be used to sort them.
// Regardless of the sorting aspect, built-in members always appear at the end of the struct.
struct MemberSorter
{
enum SortAspect
{
2021-03-26 10:00:35 +00:00
LocationThenBuiltInType,
Offset
};
void sort();
bool operator()(uint32_t mbr_idx1, uint32_t mbr_idx2);
MemberSorter(SPIRType &t, Meta &m, SortAspect sa);
SPIRType &type;
Meta &meta;
SortAspect sort_aspect;
};
};
} // namespace SPIRV_CROSS_NAMESPACE
#endif