DXVK emits SPIR-V where fragment shader builtins have names derived from
DXBC assembly, e.g. `oDepth` for `FragDepth`. When we declared the
disabled output, we used this name, but when referencing it, we
continued to use the GLSL name. This breaks compilation.
MSL does not support this, so we have to emulate it by passing it around
as a varying between stages. We use a special "user(clipN)" attribute
for this rather than locN which is used for user varyings.
This avoids a lot of huge code changes.
Arrays generally cannot be copied in and out of buffers, at least no
compiler frontend seems to do it.
Also avoids a lot of issues surrounding packed vectors and matrices.
This is not necessary, as we must emit an invalidating store before we
potentially consume an invalid expression. In fact, we're a bit
conservative here in this case for example:
int tmp = variable;
if (...)
{
variable = 10;
}
else
{
// Consuming tmp here is fine, but it was
// invalidated while emitting other branch.
// Technically, we need to study if there is an invalidating store
// in the CFG between the loading block and this block, and the other
// branch will not be a part of that analysis.
int tmp2 = tmp * tmp;
}
Fixing this case means complex CFG traversal *everywhere*, and it feels like overkill.
Fixing this exposed a bug with access chains, so fix a bug where expression dependencies were not
inherited properly in access chains. Access chains are now considered forwarded if there
is at least one dependency which is also forwarded.
This subtle bug removed any expression validation for trivially swizzled
variables. Make usage suppression a more explicit concept rather than
just hacking off forwarded_temporaries.
There is some fallout here with loop generation since our expression
invalidation is currently a bit too naive to handle loops properly.
The forwarding bug masked this problem until now.
If part of the loop condition is also used in the body, we end up
reading an invalid expression, which in turn forces a temporary to be
generated in the condition block, not good. We'll need to be smarter
here ...
This maps them to their MSL equivalents. I've mapped `Coherent` to
`volatile` since MSL doesn't have anything weaker than `volatile` but
stronger than nothing.
As part of this, I had to remove the implicit `volatile` added for
atomic operation casts. If the buffer is already `coherent` or
`volatile`, then we would add a second `volatile`, which would be
redundant. I think this is OK even when the buffer *doesn't* have
`coherent`: `T *` is implicitly convertible to `volatile T *`, but not
vice-versa. It seems to compile OK at any rate. (Note that the
non-`volatile` overloads of the atomic functions documented in the spec
aren't present in the MSL 2.2 stdlib headers.)
`restrict` is tricky, because in MSL, as in C++, it needs to go *after*
the asterisk or ampersand for the pointer type it's modifying.
Another issue is that, in the `Simple`, `GLSL450`, and `Vulkan` memory
models, `Restrict` is the default (i.e. does not need to be specified);
but MSL likely follows the `OpenCL` model where `Aliased` is the
default. We probably need to implicitly set either `Restrict` or
`Aliased` depending on the module's declared memory model.
We used to use the Binding decoration for this, but this method is
hopelessly broken. If no explicit MSL resource remapping exists, we
remap automatically in a manner which should always "just work".
In multiple-entry-point modules, we declared builtin inputs which were
not supposed to be used for that entry point.
Fix this, by being more strict when checking which builtins to emit.
MSL generally emits the aliases, which means we cannot always place the
master type first, unlike GLSL and HLSL. The logic fix is just to
reorder after we have tagged types with packing information, rather than
doing it in the parser fixup.
Avoids ugly warnings on nearly every compute shader.
We could do analysis to detect whether we need to emit this constant,
but it's a bit tedious to figure out if an OpConstantComponent is
actually used by opcodes, so just make it simple.
Return after loading the input control point array if there are more
input points than output points, and this was one of the helper
invocations spun off to load the input points. I was hesitant to do this
initially, since the MSL spec has this to say about barriers:
> The `threadgroup_barrier` (or `simdgroup_barrier`) function must be
> encountered by all threads in a threadgroup (or SIMD-group) executing
> the kernel.
That is, if any thread executes the barrier, then all threads must
execute it, or the barrier'd invocations will hang. But, the key words
here seem to be "executing the kernel;" inactive invocations, those that
have already returned, need not encounter the barrier to prevent hangs.
Indeed, I've encountered no problems from doing this, at least on my
hardware. This also fixes a few CTS tests that were failing due to
execution ordering; apparently, my assumption that the later, invalid
data written by the helpers would get overwritten was wrong.
The tessellation levels in Metal are stored as a densely-packed array of
half-precision floating point values. But, stage-in attributes in Metal
have to have offsets and strides aligned to a multiple of four, so we
can't add them individually. Luckily for us, the arrays have lengths
less than 4. So, let's use vectors for them!
Triangles get a single attribute with a `float4`, where the outer levels
are in `.xyz` and the inner levels are in `.w`. The arrays are unpacked
as though we had added the elements individually. Quads get two: a
`float4` with the outer levels and a `float2` with the inner levels.
Further, since vectors can be indexed as arrays, there's no need to
unpack them in this case.
This also saves on precious vertex attributes. Before, we were using up
to 6 of them. Now we need two at most.
In SPIR-V, there are always two inner levels and four outer levels, even
if the input patch isn't a quad patch. But in MSL, due to requirements
imposed by Metal, only one inner level and three outer levels exist when
the input patch is a triangle patch. We must explicitly ignore any write
to the nonexistent second inner and fourth outer levels in this case.
