Old GCC might trigger the the comparison will always evaluate as ‘true’
warnig for static build:
set-freeres.c:87:14: error: the comparison will always evaluate as
‘true’ for the address of ‘__libc_getgrgid_freemem_ptr’ will never be
NULL [-Werror=address]
if (&__ptr != NULL) \
So add pragma weak for all affected usages.
Checked on x86_64 and i686 with gcc 6 and 13.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Generated on a Cavium Octeon III 2 board running Linux version 4.19.249
and GCC 13.1.0.
Needed due to commit cf7ffdd8a5 ("added pair of inputs for hypotf in
binary32").
This was added in 233399bce2 just for warn_if_unused
warnings rather than anything substantial.
Now that we have a proper configure argument for F_S (--enable-fortify-source),
just drop this entirely, to avoid conflicting with e.g. detected --enable-fortify-source
finding F_S=3, then nscd's Makefile setting F_S=2, resulting in a build-failure
because of the redefinition.
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Starting with commit 2c6b4b272e
"nptl: Unconditionally use a 32-byte rseq area", the testcase
misc/tst-rseq-disable is UNSUPPORTED as RSEQ_SIG is not defined.
The mentioned commit removes inclusion of sys/rseq.h in nptl/descr.h.
Thus just include sys/rseq.h in the tst-rseq-disable.c as also done
in tst-rseq.c and tst-rseq-nptl.c.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
If fortify is enabled, the truncated output warning is issued by
the wrapper itself:
In function ‘strncpy’,
inlined from ‘test_strncpy’ at tester.c:505:10:
../string/bits/string_fortified.h:95:10: error: ‘__builtin_strncpy’
destination unchanged after copying no bytes from a string of length 3
[-Werror=stringop-truncation]
95 | return __builtin___strncpy_chk (__dest, __src, __len,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
96 | __glibc_objsize (__dest));
| ~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../include/bits/string_fortified.h:1,
from ../string/string.h:548,
from ../include/string.h:60,
from tester.c:33,
from inl-tester.c:6:
In function ‘strncpy’,
inlined from ‘test_strncpy’ at tester.c:505:10:
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If fortify is enabled, the truncated output warning is issued by
the wrapper itself:
bug-strncat1.c: In function ‘main’:
bug-strncat1.c:14:3: error: ‘__builtin___strncat_chk’ output truncated
copying 1 byte from a string of length 2 [-Werror=stringop-truncation]
14 | strncat (d, "\5\6", 1);
| ^
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The errno variable is potentially clobbered by the preceding
send call. It is not related to the to-be-cached information.
The parallel code in hstcache.c and servicescache.c already uses
errval.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Leads to build failures (preprocessor redefinitions), and there is not
enough time to address this properly. Deferred until after 2.38 release.
This reverts commit 59dc07637f.
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Generated on a VisionFive 2 board running Linux version 6.4.2 and
GCC 13.1.0.
Needed due to commit cf7ffdd8a5 ("added pair of inputs for hypotf in
binary32").
Add new definitions for the MIPS target, specifically: relocation
types, machine flags, section type names, and object attribute tags
and values. On MIPS64, up to three relocations may be specified
within r_info, by the r_type, r_type2, and r_type3 fields, so add new
macros to get the respective reloc types for MIPS64.
If the kernel headers provide a larger struct rseq, we used that
size as the argument to the rseq system call. As a result,
rseq registration would fail on older kernels which only accept
size 32.
On GNU/Hurd, O_RDWR actually is O_WRONLY|O_RDONLY, so checking through
bitness really is wrong. O_ACCMODE is there for this.
Fixes: 5324d25842 ("fileops: Don't process ,ccs= as individual mode flags (BZ#18906)")
The 30379efad1 added _FORTIFY_SOURCE checks without check if compiler
does support all used fortify levels. This patch fixes it by first
checking at configure time the maximum support fortify level and using
it instead of a pre-defined one.
Checked on x86_64 with gcc 11, 12, and 13.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Tested-by: Florian Weimer <fweimer@redhat.com>
We mentioned eventual dropping of libcrypt in the 2.28 NEWS. Actually
put that plan in motion by first disabling building libcrypt by default.
note in NEWS that the library will be dropped completely in a future
release.
Also add a couple of builds into build-many-glibcs.py.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Fixes the following test-time errors, that lead to FAILs, on toolchains
that set -z now out o the box, such as the one used on Gentoo Hardened:
.../build-x86-x86_64-pc-linux-gnu-nptl $ grep '' nptl/tst-tls3*.out
nptl/tst-tls3.out:dlopen failed
nptl/tst-tls3-malloc.out:dlopen failed
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
* nptl/descr.h (struct pthread): Remove end_padding member, which
made this type incomplete.
(PTHREAD_STRUCT_END_PADDING): Stop using end_padding.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The _FORTIFY_SOURCE is used as default by some system compilers,
and there is no way to check if some fortify extension does not
trigger any conformance issue.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Based on feedback by Mike Gilbert <floppym@gentoo.org>
Linux-6.1.38-dist x86_64 AMD Phenom-tm- II X6 1055T Processor
-march=amdfam10
failures occur for x32 ABI
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Starting with commit 1bcfe0f732, the
test was enhanced and the object for __builtin_return_address (0)
is searched with _dl_find_object.
Unfortunately on e.g. s390 (31bit), a postprocessing step is needed
as the highest bit has to be masked out. This can be done with
__builtin_extract_return_addr.
Without this postprocessing, _dl_find_object returns with -1 and the
content of dlfo is invalid, which may lead to segfaults in basename.
Therefore those checks are now only done on success.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
On some machines we end up with incomplete cache information. This can
make the new calculation of `sizeof(total-L3)/custom-divisor` end up
lower than intended (and lower than the prior value). So reintroduce
the old bound as a lower bound to avoid potentially regressing code
where we don't have complete information to make the decision.
Reviewed-by: DJ Delorie <dj@redhat.com>
After:
```
commit af992e7abd
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Jun 7 13:18:01 2023 -0500
x86: Increase `non_temporal_threshold` to roughly `sizeof_L3 / 4`
```
Split `shared` (cumulative cache size) from `shared_per_thread` (cache
size per socket), the `shared_per_thread` *can* be slightly off from
the previous calculation.
Previously we added `core` even if `threads_l2` was invalid, and only
used `threads_l2` to divide `core` if it was present. The changed
version only included `core` if `threads_l2` was valid.
This change restores the old behavior if `threads_l2` is invalid by
adding the entire value of `core`.
Reviewed-by: DJ Delorie <dj@redhat.com>
Based on feedback by Arsen Arsenović <arsen@gentoo.org>
Linux-6.1.38-gentoo-dist-hardened x86_64 AMD Ryzen 7 3800X 8-Core Processor
-march=x86-64-v2
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Line numbers, version numbers, template date changed everywhere
Nontrivial changes in de, ro, uk, zh_TW
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on s390x-linux-gnu and s390-linux-gnu.
The sparc ABI has multiple cases on how to handle JMP_SLOT relocations,
(sparc_fixup_plt/sparc64_fixup_plt). For BINDNOW, _dl_audit_symbind
will be responsible to setup the final relocation value; while for
lazy binding _dl_fixup/_dl_profile_fixup will call the audit callback
and tail cail elf_machine_fixup_plt (which will call
sparc64_fixup_plt).
This patch fixes by issuing the SPARC specific routine on bindnow and
forwarding the audit value to elf_machine_fixup_plt for lazy resolution.
It fixes the la_symbind for bind-now tests on sparc64 and sparcv9:
elf/tst-audit24a
elf/tst-audit24b
elf/tst-audit24c
elf/tst-audit24d
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
This patch checks if assembler supports vector instructions to
generate LASX/LSX code or not, and then define HAVE_LOONGARCH_VEC_ASM macro
We have added support for vector instructions in binutils-2.41
See:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=75b2f521b101d974354f6ce9ed7c054d8b2e3b7a
commit 75b2f521b101d974354f6ce9ed7c054d8b2e3b7a
Author: mengqinggang <mengqinggang@loongson.cn>
Date: Thu Jun 22 10:35:28 2023 +0800
LoongArch: gas: Add lsx and lasx instructions support
gas/ChangeLog:
* config/tc-loongarch.c (md_parse_option): Add lsx and lasx option.
(loongarch_after_parse_args): Add lsx and lasx option.
opcodes/ChangeLog:
* loongarch-opc.c (struct loongarch_ase): Add lsx and lasx
instructions.
Depending on build configuration, the [routine]-c.c files may be chosen
to provide fortified routines implementation. While [routines].c
implementation were automatically excluded, the [routines]-c.c ones were
not. This patch fixes that by adding these file to the list to be
filtered.
This brings in the new Romanian language translations, and updates
nine other translations. Important translations in this update
include the Italian and Japanese translations for ESTALE which
remove the mention of "NFS" from the error message translation.
Success is reported with a 0 return value, and failure is -1.
Enhance the kitchen sink test elf/tst-audit28 to cover
_dl_find_object as well.
Fixes commit 5d28a8962d ("elf: Add _dl_find_object function")
and bug 30515.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The trim_threshold is too aggressive a heuristic to decide if chunk
reuse is OK for reallocated memory; for repeated small, shrinking
allocations it leads to internal fragmentation and for repeated larger
allocations that fragmentation may blow up even worse due to the dynamic
nature of the threshold.
Limit reuse only when it is within the alignment padding, which is 2 *
size_t for heap allocations and a page size for mmapped allocations.
There's the added wrinkle of THP, but this fix ignores it for now,
pessimizing that case in favor of keeping fragmentation low.
This resolves BZ #30579.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reported-by: Nicolas Dusart <nicolas@freedelity.be>
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Some locales define a list of mapping pairs of alternate digits and
separators for input digits (to_inpunct). This require the scanf
to create a list of all possible inputs for the optional type
modifier 'I'.
Checked on x86_64-linux-gnu.
Reviewed-by: Joe Simmons-Talbott <josimmon@redhat.com>
In processing the first 7 individual characters of the mode for fopen
if ,ccs= is used those characters will be processed as well. Stop
processing individual mode flags once a comma is encountered. This has
the effect of requiring ,ccs= to be the last mode flag in the mode
string. Add a testcase to check that the ,ccs= mode flag is not
processed as individual mode flags.
Reviewed-by: DJ Delorie <dj@redhat.com>
Return value from *scanf and *asprintf routines are now properly checked
in test-scanf-ldbl-compat-template.c and test-printf-ldbl-compat.c.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
