The implementations of trunc functions using x87 floating point (i386 and
x86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The implementations of floor functions using x87 floating point (i386 and
86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The implementations of ceil functions using x87 floating point (i386 and
x86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
In Linux 6.9 a new flag is added to allow for Per-io operations to
disable append mode even if a file was opened with the flag O_APPEND.
This is done with the new RWF_NOAPPEND flag.
This caused two test failures as these tests expected the flag 0x00000020
to be unused. Adding the flag definition now fixes these tests on Linux
6.9 (v6.9-rc1).
FAIL: misc/tst-preadvwritev2
FAIL: misc/tst-preadvwritev64v2
This patch adds the flag, adjusts the test and adds details to
documentation.
Link: https://lore.kernel.org/all/20200831153207.GO3265@brightrain.aerifal.cx/
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The ifunc variants now uses the powerpc implementation which in turn
uses the compiler builtin. Without the proper -mcpu switch the builtin
does not generate the expected optimization.
Checked on powerpc-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It was raised on libc-help [1] that some Linux kernel interfaces expect
the libc to define __USE_TIME_BITS64 to indicate the time_t size for the
kABI. Different than defined by the initial y2038 design document [2],
the __USE_TIME_BITS64 is only defined for ABIs that support more than
one time_t size (by defining the _TIME_BITS for each module).
The 64 bit time_t redirects are now enabled using a different internal
define (__USE_TIME64_REDIRECTS). There is no expected change in semantic
or code generation.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
arm-linux-gnueabi
[1] https://sourceware.org/pipermail/libc-help/2024-January/006557.html
[2] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign
Reviewed-by: DJ Delorie <dj@redhat.com>
Use same strategy as bench-strstr.c (93eebae516 and 80b2bfb535)
and use json_ctx for output to help standardize format across all
benchtests.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
As indicated in a recent thread, this it is a simple brute-force
algorithm that checks the whole needle at a matching character pair
(and does so 1 byte at a time after the first 64 bytes of a needle).
Also it never skips ahead and thus can match at every haystack
position after trying to match all of the needle, which generic
implementation avoids.
As indicated by Wilco, a 4x larger needle and 16x larger haystack gives
a clear 65x slowdown both basic_strstr and __strstr_avx512:
"ifuncs": ["basic_strstr", "twoway_strstr", "__strstr_avx512",
"__strstr_sse2_unaligned", "__strstr_generic"],
{
"len_haystack": 65536,
"len_needle": 1024,
"align_haystack": 0,
"align_needle": 0,
"fail": 1,
"desc": "Difficult bruteforce needle",
"timings": [4.0948e+07, 15094.5, 3.20818e+07, 108558, 10839.2]
},
{
"len_haystack": 1048576,
"len_needle": 4096,
"align_haystack": 0,
"align_needle": 0,
"fail": 1,
"desc": "Difficult bruteforce needle",
"timings": [2.69767e+09, 100797, 2.08535e+09, 495706, 82666.9]
}
PS: I don't have an AVX512 capable machine to verify this issues, but
skimming through the code it does seems to follow what Wilco has
described.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The value of l_scope is only valid post relocation, so this original
check was triggering undefined behavior. Instead just directly check to
see if the object has been relocated, at which point using l_scope is
safe.
Reported-by: Andreas Schwab <schwab@suse.de>
Closes: BZ #31317
Fixes: e0590f41fe ("RISC-V: Enable static-pie.")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Previously, HTL would always allocate non-executable stacks. This has
never been noticed, since GNU Mach on x86 ignores VM_PROT_EXECUTE and
makes all pages implicitly executable. Since GNU Mach on AArch64
supports non-executable pages, HTL forgetting to pass VM_PROT_EXECUTE
immediately breaks any code that (unfortunately, still) relies on
executable stacks.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-7-bugaevc@gmail.com>
While we could support it on any architecture, the tunable is currently
only defined on x86_64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-5-bugaevc@gmail.com>
We would like to avoid statically defining any specific page size on
aarch64-gnu, and instead make sure that everything uses the dynamic
page size, available via vm_page_size and GLRO(dl_pagesize).
There are currently a few places in glibc that require EXEC_PAGESIZE
to be defined. Per Roland's suggestion [0], drop the static
GLRO(dl_pagesize) initializers (for now, only if EXEC_PAGESIZE is not
defined), and don't require EXEC_PAGESIZE definition for libio to
enable mmap usage.
[0]: https://mail.gnu.org/archive/html/bug-hurd/2011-10/msg00035.html
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-4-bugaevc@gmail.com>
We'd like to avoid committing to a specific size of virtual address
space (i.e. the value of VM_AARCH64_T0SZ) on AArch64. While the current
version of GNU Mach still exports VM_MAX_ADDRESS for compatibility, we
should try to avoid relying on it when we can. This piece of logic in
_hurdsig_getenv () doesn't actually care about the size of user-
accessible virtual address space, it just wants to preempt faults on any
addresses starting from the value of the P pointer and above. So, use
(unsigned long int) -1 instead of VM_MAX_ADDRESS.
While at it, change the casts to (unsigned long int) and not just
(long int), since the type of struct hurd_signal_preemptor.{first,last}
is unsigned long int.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-3-bugaevc@gmail.com>
Move _hurd_self_sigstate (), _hurd_critical_section_lock (), and
_hurd_critical_section_unlock () inline implementations (that were
already guarded by #if defined _LIBC) to the internal version of the
header. While at it, add <tls.h> to the includes, and use
__LIBC_NO_TLS () unconditionally.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-2-bugaevc@gmail.com>
The log incorrectly prints, setcontext failed. Update this to indicate
that actually swapcontext failed.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
On OpenRISC variadic functions and regular functions have different
calling conventions so this wrapper is needed to translate. This
wrapper is copied from x86_64/x32. I don't know the build system enough
to find a cleaner way to share the code between x86_64/x32 and or1k
(maybe Implies?), so I went with the straight copy.
This fixes test failures:
misc/tst-prctl
nptl/tst-setgetname
This test failure:
math/test-fenv
If rounding mode and exception macros are defined then the fenv tests
run and always fail. This patch adds an ifdef using the
__or1k_hard_float__ macro provided by gcc to avoid defining these fenv
macros when they cnnot be used. This is similar to what is done in csky.
Note, I will post the or1k hard-float support soon. So, I prefer to
leave the hard-float bits here for now.
Old Linux kernels disable SVE after every system call. Calling the
SVE-optimized memcpy afterwards will then cause a trap to reenable SVE.
As a result, applications with a high use of syscalls may run slower with
the SVE memcpy. This is true for kernels between 4.15.0 and before 6.2.0,
except for 5.14.0 which was patched. Avoid this by checking the kernel
version and selecting the SVE ifunc on modern kernels.
Parse the kernel version reported by uname() into a 24-bit kernel.major.minor
value without calling any library functions. If uname() is not supported or
if the version format is not recognized, assume the kernel is modern.
Tested-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The following three changes have been added to provide initial Power11 support.
1. Add the directories to hold Power11 files.
2. Add support to select Power11 libraries based on AT_PLATFORM.
3. Let submachine=power11 be set automatically.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
This patch adds a new feature for powerpc. In order to get faster
access to the HWCAP3/HWCAP4 masks, similar to HWCAP/HWCAP2 (i.e. for
implementing __builtin_cpu_supports() in GCC) without the overhead of
reading them from the auxiliary vector, we now reserve space for them
in the TCB.
This is an ABI change for GLIBC 2.39.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
The aarch64 uses 'trad' for traditional tls and 'desc' for tls
descriptors, but unlike other targets it defaults to 'desc'. The
gnutls2 configure check does not set aarch64 as an ABI that uses
TLS descriptors, which then disable somes stests.
Also rename the internal machinery fron gnu2 to tls descriptors.
Checked on aarch64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
ARM _dl_tlsdesc_dynamic slow path has two issues:
* The ip/r12 is defined by AAPCS as a scratch register, and gcc is
used to save the stack pointer before on some function calls. So it
should also be saved/restored as well. It fixes the tst-gnu2-tls2.
* None of the possible VFP registers are saved/restored. ARM has the
additional complexity to have different VFP bank sizes (depending of
VFP support by the chip).
The tst-gnu2-tls2 test is extended to check for VFP registers, although
only for hardfp builds. Different than setcontext, _dl_tlsdesc_dynamic
does not have HWCAP_ARM_IWMMXT (I don't have a way to properly test
it and it is almost a decade since newer hardware was released).
With this patch there is no need to mark tst-gnu2-tls2 as XFAIL.
Checked on arm-linux-gnueabihf.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
_dl_tlsdesc_dynamic preserves RDI, RSI and RBX before realigning stack.
After realigning stack, it saves RCX, RDX, R8, R9, R10 and R11. Define
TLSDESC_CALL_REGISTER_SAVE_AREA to allocate space for RDI, RSI and RBX
to avoid clobbering saved RDI, RSI and RBX values on stack by xsave to
STATE_SAVE_OFFSET(%rsp).
+==================+<- stack frame start aligned at 8 or 16 bytes
| |<- RDI saved in the red zone
| |<- RSI saved in the red zone
| |<- RBX saved in the red zone
| |<- paddings for stack realignment of 64 bytes
|------------------|<- xsave buffer end aligned at 64 bytes
| |<-
| |<-
| |<-
|------------------|<- xsave buffer start at STATE_SAVE_OFFSET(%rsp)
| |<- 8-byte padding for 64-byte alignment
| |<- 8-byte padding for 64-byte alignment
| |<- R11
| |<- R10
| |<- R9
| |<- R8
| |<- RDX
| |<- RCX
+==================+<- RSP aligned at 64 bytes
Define TLSDESC_CALL_REGISTER_SAVE_AREA, the total register save area size
for all integer registers by adding 24 to STATE_SAVE_OFFSET since RDI, RSI
and RBX are saved onto stack without adjusting stack pointer first, using
the red-zone. This fixes BZ #31501.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Originally, nptl/descr.h included <sys/rseq.h>, but we removed that
in commit 2c6b4b272e ("nptl:
Unconditionally use a 32-byte rseq area"). After that, it was
not ensured that the RSEQ_SIG macro was defined during sched_getcpu.c
compilation that provided a definition. This commit always checks
the rseq area for CPU number information before using the other
approaches.
This adds an unnecessary (but well-predictable) branch on
architectures which do not define RSEQ_SIG, but its cost is small
compared to the system call. Most architectures that have vDSO
acceleration for getcpu also have rseq support.
Fixes: 2c6b4b272e
Fixes: 1d350aa060
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Due to GCC bug 110901 -mcpu can override -march setting when compiling
asm code and thus a compiler targetting a specific cpu can fail the
configure check even when binutils gas supports SVE.
The workaround is that explicit .arch directive overrides both -mcpu
and -march, and since that's what the actual SVE memcpy uses the
configure check should use that too even if the GCC issue is fixed
independently.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.8. (There are no new
constants covered by these tests in 6.8 that need any other header
changes.)
Tested with build-many-glibcs.py.
