These changes will be active for all platforms that don't provide
their own exp() routines. They will also be active for ieee754
versions of ccos, ccosh, cosh, csin, csinh, sinh, exp10, gamma, and
erf.
Typical performance gains is typically around 5x when measured on
Sparc s7 for common values between exp(1) and exp(40).
Using the glibc perf tests on sparc,
sparc (nsec) x86 (nsec)
old new old new
max 17629 395 5173 144
min 399 54 15 13
mean 5317 200 1349 23
The extreme max times for the old (ieee754) exp are due to the
multiprecision computation in the old algorithm when the true value is
very near 0.5 ulp away from an value representable in double
precision. The new algorithm does not take special measures for those
cases. The current glibc exp perf tests overrepresent those values.
Informal testing suggests approximately one in 200 cases might
invoke the high cost computation. The performance advantage of the new
algorithm for other values is still large but not as large as indicated
by the chart above.
Glibc correctness tests for exp() and expf() were run. Within the
test suite 3 input values were found to cause 1 bit differences (ulp)
when "FE_TONEAREST" rounding mode is set. No differences in exp() were
seen for the tested values for the other rounding modes.
Typical example:
exp(-0x1.760cd2p+0) (-1.46113312244415283203125)
new code: 2.31973271630014299393707e-01 0x1.db14cd799387ap-3
old code: 2.31973271630014271638132e-01 0x1.db14cd7993879p-3
exp = 2.31973271630014285508337 (high precision)
Old delta: off by 0.49 ulp
New delta: off by 0.51 ulp
In addition, because ieee754_exp() is used by other routines, cexp()
showed test results with very small imaginary input values where the
imaginary portion of the result was off by 3 ulp when in upward
rounding mode, but not in the other rounding modes. For x86, tgamma
showed a few values where the ulp increased to 6 (max ulp for tgamma
is 5). Sparc tgamma did not show these failures. I presume the tgamma
differences are due to compiler optimization differences within the
gamma function.The gamma function is known to be difficult to compute
accurately.
* sysdeps/ieee754/dbl-64/e_exp.c: Include <math-svid-compat.h> and
<errno.h>. Include "eexp.tbl".
(half): New constant.
(one): Likewise.
(__ieee754_exp): Rewrite.
(__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/eexp.tbl: New file.
* sysdeps/ieee754/dbl-64/slowexp.c: Remove file.
* sysdeps/i386/fpu/slowexp.c: Likewise.
* sysdeps/ia64/fpu/slowexp.c: Likewise.
* sysdeps/m68k/m680x0/fpu/slowexp.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-avx.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/slowexp-fma4.c: Likewise.
* sysdeps/generic/math_private.h (__slowexp): Remove prototype.
* sysdeps/ieee754/dbl-64/e_pow.c: Remove mention of slowexp.c in
comment.
* sysdeps/powerpc/power4/fpu/Makefile [$(subdir) = math]
(CPPFLAGS-slowexp.c): Remove variable.
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Remove slowexp-fma, slowexp-fma4 and slowexp-avx.
(CFLAGS-slowexp-fma.c): Remove variable.
(CFLAGS-slowexp-fma4.c): Likewise.
(CFLAGS-slowexp-avx.c): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-avx.c (__slowexp): Do not
define as macro.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma.c (__slowexp): Likewise.
* sysdeps/x86_64/fpu/multiarch/e_exp-fma4.c (__slowexp): Likewise.
* math/Makefile (type-double-routines): Remove slowexp.
* manual/probes.texi (slowexp_p6): Remove.
(slowexp_p32): Likewise.
This patch makes use of vectors for aligned inputs. Improvements
upto 30% seen for larger aligned inputs.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
On POWER8, unaligned memory accesses to cached memory has little impact
on performance as opposed to its ancestors.
It is disabled by default and will only be available when the tunable
glibc.tune.cached_memopt is set to 1.
__memcpy_power8_cached __memcpy_power7
============================================================
max-size=4096: 33325.70 ( 12.65%) 38153.00
max-size=8192: 32878.20 ( 11.17%) 37012.30
max-size=16384: 33782.20 ( 11.61%) 38219.20
max-size=32768: 33296.20 ( 11.30%) 37538.30
max-size=65536: 33765.60 ( 10.53%) 37738.40
* manual/tunables.texi (Hardware Capability Tunables): Document
glibc.tune.cached_memopt.
* sysdeps/powerpc/cpu-features.c: New file.
* sysdeps/powerpc/cpu-features.h: New file.
* sysdeps/powerpc/dl-procinfo.c [!IS_IN(ldconfig)]: Add
_dl_powerpc_cpu_features.
* sysdeps/powerpc/dl-tunables.list: New file.
* sysdeps/powerpc/ldsodefs.h: Include cpu-features.h.
* sysdeps/powerpc/powerpc32/power4/multiarch/init-arch.h
(INIT_ARCH): Initialize use_aligned_memopt.
* sysdeps/powerpc/powerpc64/dl-machine.h [defined(SHARED &&
IS_IN(rtld))]: Restrict dl_platform_init availability and
initialize CPU features used by tunables.
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines):
Add memcpy-power8-cached.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c: Add
__memcpy_power8_cached.
* sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power8-cached.S:
New file.
Reviewed-by: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
This patch adds several new tunables to control the behavior of
elision on supported platforms[1]. Since elision now depends
on tunables, we should always *compile* with elision enabled,
and leave the code disabled, but available for runtime
selection. This gives us *much* better compile-time testing of
the existing code to avoid bit-rot[2].
Tested on ppc, ppc64, ppc64le, s390x and x86_64.
[1] This part of the patch was initially proposed by
Paul Murphy but was "staled" because the framework have changed
since the patch was originally proposed:
https://patchwork.sourceware.org/patch/10342/
[2] This part of the patch was inititally proposed as a RFC by
Carlos O'Donnell. Make sense to me integrate this on the patch:
https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html
* elf/dl-tunables.list: Add elision parameters.
* manual/tunables.texi: Add entries about elision tunable.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c:
Add callback functions to dynamically enable/disable elision.
Add multiple callbacks functions to set elision parameters.
Deleted __libc_enable_secure check.
* sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise.
* sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise.
* configure: Regenerated.
* configure.ac: Option enable_lock_elision was deleted.
* config.h.in: ENABLE_LOCK_ELISION flag was deleted.
* config.make.in: Remove references to enable_lock_elision.
* manual/install.texi: Elision configure option was removed.
* INSTALL: Regenerated to remove enable_lock_elision.
* nptl/Makefile:
Disable elision so it can verify error case for destroying a mutex.
* sysdeps/powerpc/nptl/elide.h:
Cleanup ENABLE_LOCK_ELISION check.
Deleted macros for the case when ENABLE_LOCK_ELISION was not defined.
* sysdeps/s390/configure: Regenerated.
* sysdeps/s390/configure.ac: Remove references to enable_lock_elision..
* nptl/tst-mutex8.c:
Deleted all #ifndef ENABLE_LOCK_ELISION from the test.
* sysdeps/powerpc/powerpc32/sysdep.h:
Deleted all ENABLE_LOCK_ELISION checks.
* sysdeps/powerpc/powerpc64/sysdep.h: Likewise.
* sysdeps/powerpc/sysdep.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise.
* sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise.
* sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise.
* sysdeps/unix/sysv/linux/s390/Makefile: Remove references to
enable-lock-elision.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc libm function implementations use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_cosf.c: Include <libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_fmaf.S: Include <libm-alias-float.h>.
(fmaf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_rintf.c: Include <libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/fpu/s_sinf.c: Include <libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/power5+/fpu/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/power7/fpu/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceilf.c:
Include <libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysignf.c:
Include <libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floorf.c:
Include <libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrintf.c:
Include <libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llroundf.c:
Include <libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logbf.c:
Include <libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrintf.c:
Include <libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lroundf.c:
Include <libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modff.c:
Include <libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_roundf.c:
Include <libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_truncf.c:
Include <libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-float.h>.
(lrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-float.h>.
(lroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceilf.c: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysignf.c: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf.c: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floorf.c: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrintf.c: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llroundf.c: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logbf.c: Include
<libm-alias-float.h>.
(logbf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modff.c: Include
<libm-alias-float.h>.
(modff): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_roundf.c: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf.c: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_truncf.c: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S: Include
<libm-alias-float.h>.
(nearbyintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S: Include
<libm-alias-float.h>.
(rintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: Include
<libm-alias-float.h>.
(ceilf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: Include
<libm-alias-float.h>.
(floorf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: Include
<libm-alias-float.h>.
(roundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: Include
<libm-alias-float.h>.
(truncf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-float.h>.
(copysignf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Include
<libm-alias-float.h>.
(cosf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-float.h>.
(llrintf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-float.h>.
(llroundf): Define using libm_alias_float.
* sysdeps/powerpc/powerpc64/power8/fpu/s_sinf.S: Include
<libm-alias-float.h>.
(sinf): Define using libm_alias_float.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes the remaining double powerpc functions use
libm_alias_double to define function aliases (with consequent removal
of the need for local compat symbol handling). Previous cleanups
avoid this patch changing installed stripped shared libraries for any
build-many-glibcs.py configuration (there are still some functions in
this patch for which the order of double and float aliases changes
within an individual source file, but in this case this doesn't result
in changes to the final library).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/power7/fpu/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_copysign.c:
Include <libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llrint.c:
Include <libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_llround.c:
Include <libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lrint.c:
Include <libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_lround.c:
Include <libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: Include
<libm-alias-double.h>.
(lrint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: Include
<libm-alias-double.h>.
(lround): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_copysign.c: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llrint.c: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power6/fpu/s_copysign.S: Include
<libm-alias-double.h>.
(copysign): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llrint.S: Include
<libm-alias-double.h>.
(llrint): Define using libm_alias_double.
(lrint): Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_llround.S: Include
<libm-alias-double.h>.
(llround): Define using libm_alias_double.
(lround): Likewise.
sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c defines the
lroundl compat symbol, version GLIBC_2_1, twice, once based on llround
and once based on __lround. Those are aliases for each other (llround
weak, __lround strong), but defining it twice does not make sense.
This patch changes it to define the compat symbol once only, matching
how libm_alias_double defines it.
Tested with build-many-glibcs.py for its powerpc64 configurations.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_llround.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_1)] (lroundl): Do not define
compat symbol based on llround.
Some powerpc logb implementations define a compat symbol for logbl
based on logb, whereas libm_alias_double defines such a compat symbol
based on __logb instead. This difference (logb is weak, __logb isn't)
is enough to result in different installed stripped shared libraries.
The difference in the installed libraries isn't significant, but first
changing the compat_symbol calls helps make it possible to validate a
subsequent change to use libm_alias_double by comparison of libraries,
so this patch does such a preliminary change.
Tested with build-many-glibcs.py for all its hard-float powerpc
configurations.
* sysdeps/powerpc/power7/fpu/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Define as compat
symbol based on __logb, not on logb.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb.c
[LONG_DOUBLE_COMPAT (libm, GLIBC_2_0)] (logbl): Likewise.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch various powerpc functions use libm_alias_double to
define function aliases (with consequent removal of the need for local
compat symbol handling). (The present patch excludes the changes to
some functions where such changes could result in differences in
installed stripped shared libraries because of changes to the exact
ordering or properties of symbols in individual .os files.)
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_rint.c: Include <libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/power5+/fpu/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_floor.c:
Include <libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_round.c:
Include <libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_trunc.c:
Include <libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_ceil.c: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_floor.c: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_round.c: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_trunc.c: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S: Include
<libm-alias-double.h>.
(nearbyint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include
<libm-alias-double.h>.
(rint): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: Include
<libm-alias-double.h>.
(ceil): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: Include
<libm-alias-double.h>.
(floor): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S: Include
<libm-alias-double.h>.
(round): Define using libm_alias_double.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S: Include
<libm-alias-double.h>.
(trunc): Define using libm_alias_double.
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes powerpc fabs and fma use libm_alias_double
to define function aliases. This brings in automatic symbol
versioning compat handling, so the powerpc32 and powerpc64 wrappers
that added such handling to the generic sysdeps/powerpc/fpu versions
are removed as no longer required (there are no sysdeps directory
ordering issues that would necessitate keeping trivial wrappers
there).
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for all its hard-float powerpc configurations.
* sysdeps/powerpc/fpu/s_fabs.S: Include <libm-alias-double.h>.
(fabs): Define using libm_alias_double.
* sysdeps/powerpc/fpu/s_fma.S: Include <libm-alias-double.h>.
(fma): Define using libm_alias_double.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: Remove file.
* sysdeps/powerpc/powerpc32/fpu/s_fma.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fma.S: Likewise.
On POWER9, cbrtf128 fails by 1 ULP.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerate.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Continuing the preparation for additional _FloatN / _FloatNx function
aliases, this patch makes an e500 libm function implementation use
libm_alias_float to define function aliases.
Tested with build-many-glibcs.py that installed stripped shared
libraries are unchanged for its e500 configurations.
* sysdeps/powerpc/powerpc32/e500/nofpu/s_fabsf.S: Include
<libm-alias-float.h>.
(fabsf): Define using libm_alias_float.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
Supporting _Float64x on powerpc64le means that tests of that type need
to use -mfloat128 just like tests of _Float128. This patch adds the
necessary uses of that option.
Tested (compilation only) for powerpc64le with build-many-glibcs.py,
in conjunction with _Float64x support patches.
* sysdeps/powerpc/powerpc64le/Makefile ($(foreach
suf,$(all-object-suffixes),$(objpfx)test-float64x%$(suf))): Add
-mfloat128 to CFLAGS.
($(foreach
suf,$(all-object-suffixes),$(objpfx)test-ifloat64x%$(suf))):
Likewise.
(CFLAGS-libm-test-support-float64x.c): New variable.
($(objpfx)test-float64x% $(objpfx)test-ifloat64x%): Add
$(f128-loader-link) to gnulib-tests.
Linux commit ID cba6ac4869e45cc93ac5497024d1d49576e82666 reserved a new
bit for a scenario where transactional memory is available, but the
suspended state is disabled.
* sysdeps/powerpc/bits/hwcap.h (PPC_FEATURE2_HTM_NO_SUSPEND): New
macro.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add
htm-no-suspend.
Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Further _FloatN / _FloatNx type alias support will involve making
architecture-specific .S files use the common macros for libm function
aliases. Making them use those macros will also serve to simplify
existing code for aliases / symbol versions in various cases, similar
to such simplifications for ldbl-opt code.
The libm-alias-*.h files sometimes need to include <bits/floatn.h> to
determine which aliases they should define. At present, this does not
work for inclusion from .S files because <bits/floatn.h> can define
typedefs for old compilers. This patch changes all the
<bits/floatn.h> and <bits/floatn-common.h> headers to include
__ASSEMBLER__ conditionals. Those conditionals disable everything
related to C syntax in the __ASSEMBLER__ case, not just the problem
typedefs, as that seemed cleanest. The __HAVE_* definitions remain in
the __ASSEMBLER__ case, as those provide information that is required
to define the correct set of aliases.
Tested with build-many-glibcs.py for a representative set of
configurations (x86_64-linux-gnu i686-linux-gnu ia64-linux-gnu
powerpc64le-linux-gnu mips64-linux-gnu-n64 sparc64-linux-gnu) with GCC
6. Also tested with GCC 6 for i686-linux-gnu in conjunction with
changes to use alias macros in .S files.
* bits/floatn-common.h [!__ASSEMBLER]: Disable everything related
to C syntax instead of availability and properties of types.
* bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/ia64/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/powerpc/bits/floatn.h [!__ASSEMBLER]: Likewise.
* sysdeps/x86/bits/floatn.h [!__ASSEMBLER]: Likewise.
This patch adds two new internal defines to set the internal
pthread_mutex_t layout required by the supported ABIS:
1. __PTHREAD_MUTEX_NUSERS_AFTER_KIND which control whether to define
__nusers fields before or after __kind. The preferred value for
is 0 for new ports and it sets __nusers before __kind.
2. __PTHREAD_MUTEX_USE_UNION which control whether internal __spins and
__list members will be place inside an union for linuxthreads
compatibility. The preferred value is 0 for ports and it sets
to not use an union to define both fields.
It fixes the wrong offsets value for __kind value on x86_64-linux-gnu-x32.
Checked with a make check run-built-tests=no on all afected ABIs.
[BZ #22298]
* nptl/allocatestack.c (allocate_stack): Check if
__PTHREAD_MUTEX_HAVE_PREV is non-zero, instead if
__PTHREAD_MUTEX_HAVE_PREV is defined.
* nptl/descr.h (pthread): Likewise.
* nptl/nptl-init.c (__pthread_initialize_minimal_internal):
Likewise.
* nptl/pthread_create.c (START_THREAD_DEFN): Likewise.
* sysdeps/nptl/fork.c (__libc_fork): Likewise.
* sysdeps/nptl/pthread.h (PTHREAD_MUTEX_INITIALIZER): Likewise.
* sysdeps/nptl/bits/thread-shared-types.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
(__pthread_internal_list): Check __PTHREAD_MUTEX_USE_UNION instead
of __WORDSIZE for internal layout.
(__pthread_mutex_s): Check __PTHREAD_MUTEX_NUSERS_AFTER_KIND instead
of __WORDSIZE for internal __nusers layout and __PTHREAD_MUTEX_USE_UNION
instead of __WORDSIZE whether to use an union for __spins and __list
fields.
(__PTHREAD_MUTEX_HAVE_PREV): Define also for __PTHREAD_MUTEX_USE_UNION
case.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION): New
defines.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h
(__PTHREAD_MUTEX_NUSERS_AFTER_KIND, __PTHREAD_MUTEX_USE_UNION):
Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds a new build test to check for internal fields
offsets for user visible internal field. Although currently
the only field which is statically initialized to a non zero value
is pthread_mutex_t.__data.__kind value, the tests also check the
offset of __kind, __spins, __elision (if supported), and __list
internal member. A internal header (pthread-offset.h) is added
to each major ABI with the reference value.
Checked on x86_64-linux-gnu and with a build check for all affected
ABIs (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabihf,
hppa-linux-gnu, i686-linux-gnu, ia64-linux-gnu, m68k-linux-gnu,
microblaze-linux-gnu, mips64-linux-gnu, mips64-n32-linux-gnu,
mips-linux-gnu, powerpc64le-linux-gnu, powerpc-linux-gnu,
s390-linux-gnu, s390x-linux-gnu, sh4-linux-gnu, sparc64-linux-gnu,
sparcv9-linux-gnu, tilegx-linux-gnu, tilegx-linux-gnu-x32,
tilepro-linux-gnu, x86_64-linux-gnu, and x86_64-linux-x32).
* nptl/pthreadP.h (ASSERT_PTHREAD_STRING,
ASSERT_PTHREAD_INTERNAL_OFFSET): New macro.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Add build time
checks for internal pthread_mutex_t offsets.
* sysdeps/aarch64/nptl/pthread-offsets.h
(__PTHREAD_MUTEX_NUSERS_OFFSET, __PTHREAD_MUTEX_KIND_OFFSET,
__PTHREAD_MUTEX_SPINS_OFFSET, __PTHREAD_MUTEX_ELISION_OFFSET,
__PTHREAD_MUTEX_LIST_OFFSET): New macro.
* sysdeps/alpha/nptl/pthread-offsets.h: Likewise.
* sysdeps/arm/nptl/pthread-offsets.h: Likewise.
* sysdeps/hppa/nptl/pthread-offsets.h: Likewise.
* sysdeps/i386/nptl/pthread-offsets.h: Likewise.
* sysdeps/ia64/nptl/pthread-offsets.h: Likewise.
* sysdeps/m68k/nptl/pthread-offsets.h: Likewise.
* sysdeps/microblaze/nptl/pthread-offsets.h: Likewise.
* sysdeps/mips/nptl/pthread-offsets.h: Likewise.
* sysdeps/nios2/nptl/pthread-offsets.h: Likewise.
* sysdeps/powerpc/nptl/pthread-offsets.h: Likewise.
* sysdeps/s390/nptl/pthread-offsets.h: Likewise.
* sysdeps/sh/nptl/pthread-offsets.h: Likewise.
* sysdeps/sparc/nptl/pthread-offsets.h: Likewise.
* sysdeps/tile/nptl/pthread-offsets.h: Likewise.
* sysdeps/x86_64/nptl/pthread-offsets.h: Likewise.
Signed-off-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Update strcasestr-power8 to use power8 version of strnlen for
calculating length.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
The powerpc bits/floatn.h declares _Float128 support to be present
when the compiler supports it for powerpc64le. However, in the case
where -mlong-double-64 is used, __MATH_TG does not actually support
_Float128; it only supports _Float128 in the distinct-long-double
case.
This shows up as a build failure when building glibc mainline with GCC
mainline, given the recently added sanity check in math.h for
configurations supported by __MATH_TG, as the compat code for
-mlong-double-64 fails to build. However, the bug was logically
present before that change (including in 2.26), just less visible.
This patch fixes the build failure by declaring _Float128 to be
unsupported in that case. (Of course this can't actually stop users
calling the type-generic macros with _Float128 arguments with
-mlong-double-64, just as they could be called with other unsupported
types on other platforms, but perhaps makes it less likely by making
all the type-specific _Float128 interfaces invisible in that case.)
Tested compilation for powerpc64le with build-many-glibcs.py.
[BZ #22402]
* sysdeps/powerpc/bits/floatn.h: Include <bits/long-double.h>.
[__NO_LONG_DOUBLE_MATH] (__HAVE_FLOAT128): Define to 0.
This is another one where we'll be wanting the base symbols for
powerpc64le rather than just a power7 variant.
* sysdeps/powerpc/powerpc64/multiarch/strncase_l-power7.c: Include
string/strncase_l.c, not string/strncase.c.
(USE_IN_EXTENDED_LOCALE_MODEL): Don't define.
(libc_hidden_def): Redefine.
The routine being assembled here is strcasecmp_l, so ask for that via
__STRCMP and STRCMP defines. That change means tweaking the power7
override. Needed for later powerpc64le changes where we want the base
symbols, not just a power7 variant.
* sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l-power7.S:
(__STRCMP, STRCMP, __strcasecmp_l): Define.
(__strcasecmp): Don't define.
These functions aren't used in ld.so at the moment since we don't have
strcmp or strncmp ifuncs for them there. Remove the ld.so bloat.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power8.S: Wrap in
IS_IN (libc).
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power9.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power9.S: Likewise.
USE_AS_STPNCPY is defined by sysdeps/powerpc/powerpc64/power8/stpncpy.S,
included by this file.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Don't define
USE_AS_STPNCPY.
It seems to me that libc.a should not contain any of the __GI_
symbols, and certainly --enable-multi-arch ought to not add to the
list. At the end of this patch series we have the following in both
--enable-multi-arch and --disable-multi-arch libc.a:
0000000000000000 T __GI___readdir64
0000000000000000 T __GI___fxstatat64
0000000000000000 T __GI_getrlimit
0000000000000000 T __GI___getrlimit
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S (hidden_def):
Redefine only when SHARED.
POWER9 DD2.1 and earlier has an issue where some cache inhibited
vector load traps to the kernel, causing a performance degradation. To
handle this in memcpy and memmove, lvx/stvx is used for aligned
addresses instead of lxvd2x/stxvd2x.
Reference: https://patchwork.ozlabs.org/patch/814059/
* sysdeps/powerpc/powerpc64/power7/memcpy.S: Replace
lxvd2x/stxvd2x with lvx/stvx.
* sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
cfi info for stack adjust needs to be on the insn doing the adjust.
cfi describing register saves can be anywhere after the save insn but
before the reg is altered. Fewer locations with cfi result in smaller
cfi programs and possibly slightly faster exception handling. Thus
the LR cfi_offset move.
The idea behind ajusting sp after restoring regs is to break a
register dependency chain, in this case not be using r1 immediately
after it is modified.
The missing LR cfi_restore meant that code after the blr,
unaligned_lt_16 and other labels, would have cfi that said LR was at
cfa+16, but that code is reached without LR being saved.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Move LR cfi.
Adjust stack after restoring regs. Add missing LR cfi_restore.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
This patch moves the frame setup and teardown to immediately around
the single memset call, as has been done for power8. I've also
decreased FRAMESIZE to that needed to save the two callee-saved
registers used. Plus added cfi.
* sysdeps/powerpc/powerpc64/power7/strncpy.S: Decrease FRAMESIZE.
Move LR save and frame setup/teardown and LR restore to
immediately around memset call. Provide cfi.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
The bits/floatn.h header currently only has defines relating to
_Float128. This patch adds defines relating to other _FloatN /
_FloatNx types.
The approach taken is to add defines for all _FloatN / _FloatNx types
known to GCC, and to put them in a common bits/floatn-common.h header
included at the end of all the individual bits/floatn.h headers. If
in future some defines become different for different glibc
configurations, they will move out into the separate bits/floatn.h
headers.
Some defines are expected always to be the same across glibc ports.
Corresponding defines are nevertheless put in this header. The intent
is that where there are conditionals (in headers or in non-installed
files) that can just repeat the same or nearly the same logic for each
floating-point type, they should do so, even if in fact the cases for
some types could be unconditionally present or absent because the same
conditionals are true or false for all glibc configurations. This
should make the glibc code with such conditionals easier to read,
because the reader can just see that the same conditionals are
repeated for each type, rather than seeing different conditionals for
different types and needing to reason, at each location with such
differences, why those differences are indeed correct there. (Cases
involving per-format rather than per-type logic are more likely still
to need differences in how they handle different types.)
Having such defines and conditionals also helps in incremental
preparation for adding _Float32 / _Float64 / _Float32x / _Float64x
function aliases. I intend subsequent patches to add such
conditionals corresponding to those already present for _Float128, as
well as making more architecture-specific function implementations use
common macros to define aliases in preparation for adding such _FloatN
/ _FloatNx aliases.
Tested for x86_64.
* bits/floatn-common.h: New file.
* math/Makefile (headers): Add bits/floatn-common.h.
* bits/floatn.h: Include <bits/floatn-common.h>.
* sysdeps/ia64/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/mips/ieee754/bits/floatn.h: Likewise.
* sysdeps/powerpc/bits/floatn.h: Likewise.
* sysdeps/x86/bits/floatn.h: Likewise.
A performance regression was introduced by commit
84d74e427a "powerpc: Cleanup fenv_private.h".
In the powerpc implementation of SET_RESTORE_ROUND, there is the
following code in the "SET" function (slightly simplified):
--
old.fenv = fegetenv_register ();
new.l = (old.l & _FPU_MASK_TRAPS_RN) | r; (1)
if (new.l != old.l) (2)
{
if ((old.l & _FPU_ALL_TRAPS) != 0)
(void) __fe_mask_env ();
fesetenv_register (new.fenv); (3)
--
Line (1) sets the value of "new" to the current value of FPSCR,
but masks off summary bits, exceptions, non-IEEE mode, and
rounding mode, then ORs in the new rounding mode.
Line (2) compares this new value to the current value in order to
avoid setting a new value in the FPSCR (line (3)) unless something
significant has changed (exception enables or rounding mode).
The summary bits are not germane to the comparison, but are cleared
in "new" and preserved in "old", resulting in false negative
comparisons, and unnecessarily setting the FPSCR in those cases
with associated negative performance impacts.
The solution is to treat the summaries identically for "new" and "old":
- save them in SET
- leave them alone otherwise
- restore the saved values in RESTORE
Also minor changes:
- expand _FPU_MASK_RN to 64bit hex, to match other MASKs
- treat bit 52 (left-to-right) as reserved (since it is)
* sysdeps/powerpc/fpu/fenv_private.h (_FPU_MASK_TRAPS_RN):
(_FPU_MASK_FRAC_INEX_RET_CC): Fix masks to more properly handle
summary bits.
(_FPU_MASK_RN): Expand _FPU_MASK_RN to 64bit hex.
(_FPU_MASK_NOT_RN_NI): Treat bit 52 (left-to-right) as reserved.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Normally, TLS relocations against local symbols are optimised by the linker
to be absolute. However, gold does not do this, and so it is possible to
end up with, for example, R_SPARC_TLS_DTPMOD64 referring to a local symbol.
Since sym_map is left as null in elf_machine_rela for the special local
symbol case, the relocation handling thinks it has nothing to do, and so
the module gets left as 0. Havoc then ensues when the variable in question
is accessed.
Before this fix, the main_local_gold program would receive a SIGBUS on
sparc64, and SIGSEGV on powerpc32. With this fix applied, that test now
passes like the rest of them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela):
Assign sym_map to be map for local symbols, as TLS relocations
use sym_map to determine whether the symbol is defined and to
extract the TLS information.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_rela): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_rela): Likewise.
Fix the ifdef clause that was being used in the opposite way, setting
a wrong value of the carry bit.
This is also correcting 2 memory accesses that were mistakenly referring
to r0 while they were supposed to mean the immediate value 0.
[BZ #22142]
* stdio-common/tst-printf.c (fp_test): Add tests for DBL_MAX and
-DBL_MAX.
(do_test): Likewise.
* stdio-common/tst-printf.sh: Likewise.
* sysdeps/powerpc/powerpc64/power7/add_n.S: Invert the initial
ifdef clause in order to set the carry bit right. Replace r0 by
0 without changing the behavior.
Recent commit 59ba2d2b54 missed to add __memrchr_power8 in
ifunc list. Also handled discarding unwanted bytes for
unaligned inputs in power8 optimization.
2017-10-05 Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
* sysdeps/powerpc/powerpc64/multiarch/memrchr-ppc64.c: Revert
back to powerpc32 file.
* sysdeps/powerpc/powerpc64/multiarch/memrchr.c
(memrchr): Add __memrchr_power8 to ifunc list.
* sysdeps/powerpc/powerpc64/power8/memrchr.S: Mask
extra bytes for unaligned inputs.
This patch makes dbl-64 modf use libm_alias_double. Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is changed to define the libc compat symbol only. Because of
multiarch wrappers, the changed implementations are made not to define
aliases at all if __modf is defined as a macro, as with other
functions, so avoiding duplicate compat symbols while allowing those
wrappers to be simplified.
Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged by the patch.
* sysdeps/ieee754/dbl-64/s_modf.c: Include <libm-alias-double.h>.
(modf): Define using libm_alias_double, only if [!__modf].
* sysdeps/ieee754/dbl-64/wordsize-64/s_modf.c: Include
<libm-alias-double.h>.
(modf): Define using libm_alias_double, only if [!__modf].
* sysdeps/ieee754/ldbl-opt/s_modf.c (modfl): Only define libc
compat symbol here.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_modf-ppc32.c
(weak_alias): Do not undefine and redefine.
(strong_alias): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_modf-ppc64.c
(weak_alias): Likewise.
(strong_alias): Likewise.
This patch makes dbl-64 logb use libm_alias_double. Both the dbl-64
and dbl-64/wordsize-64 versions are changed, and the ldbl-opt version
is removed. Because of multiarch wrappers, the changed
implementations are made not to define aliases at all if __logb is
defined as a macro, as with other functions, so avoiding duplicate
compat symbols while allowing those wrappers to be simplified.
Tested for x86_64, and verified with build-many-glibcs.py that
installed stripped shared libraries are unchanged (except on alpha
where changes from using the wordsize-64 version are expected).
* sysdeps/ieee754/dbl-64/s_logb.c: Include <libm-alias-double.h>.
(logb): Define using libm_alias_double, only if [!__logb].
* sysdeps/ieee754/dbl-64/wordsize-64/s_logb.c: Include
<libm-alias-double.h>.
(logb): Define using libm_alias_double, only if [!__logb].
* sysdeps/ieee754/ldbl-opt/s_logb.c: Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_logb-ppc32.c
(weak_alias): Do not undefine and redefine.
(strong_alias): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_logb-ppc64.c
(weak_alias): Likewise.
(strong_alias): Likewise.
All representations of floating-point numbers in types with IEC 60559
binary exchange format are canonical. On the other hand, types with IEC
60559 extended formats, such as those implemented under ldbl-96 and
ldbl-128ibm, contain representations that are not canonical.
TS 18661-1 introduced the type-generic macro iscanonical, which returns
whether a floating-point value is canonical or not. In Glibc, this
type-generic macro is implemented using the macro __MATH_TG, which, when
support for float128 is enabled, relies on __builtin_types_compatible_p
to select between floating-point types. However, this use of
iscanonical breaks C++ applications, because the builtin is only
available in C mode.
This patch provides a C++ implementation of iscanonical that relies on
function overloading, rather than builtins, to select between
floating-point types.
Unlike the C++ implementations for iszero and issignaling, this
implementation ignores __NO_LONG_DOUBLE_MATH. The double type always
matches IEC 60559 double format, which is always canonical. Thus, when
double and long double are the same (__NO_LONG_DOUBLE_MATH), iscanonical
always returns 1 and is not implemented with __MATH_TG.
Tested for powerpc64, powerpc64le and x86_64.
[BZ #22235]
* math/math.h: Trivial fix for unbalanced parentheses in comment.
* math/Makefile [CXX] (tests): Add test-math-iscanonical.cc.
(CFLAGS-test-math-iscanonical.cc): New variable.
* math/test-math-iscanonical.cc: New file.
* sysdeps/ieee754/ldbl-96/bits/iscanonical.h (iscanonical):
Provide a C++ implementation based on function overloading,
rather than using __MATH_TG, which uses C-only builtins.
* sysdeps/ieee754/ldbl-128ibm/bits/iscanonical.h (iscanonical):
Likewise.
* sysdeps/powerpc/powerpc64le/Makefile
(CFLAGS-test-math-iscanonical.cc): New variable.
The new generic expf and exp2f code don't need wrappers any more, they
set errno inline, so only use the wrappers on targets that need it.
(If the wrapper is needed, then the top level wrapper code is included,
otherwise empty w_exp*f.c is used to suppress the wrapper.)
A powerpc64 expf implementation includes the expf c code directly which
needed some changes.
* sysdeps/ieee754/flt-32/e_exp2f.c (__exp2f): Define without wrapper.
* sysdeps/ieee754/flt-32/e_expf.c (__expf): Likewise
* sysdeps/ieee754/flt-32/w_exp2f.c: New file.
* sysdeps/ieee754/flt-32/w_expf.c: New file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/e_expf-ppc64.c: Update for
the new expf code.
* sysdeps/powerpc/powerpc64/fpu/multiarch/w_expf.c: New file.
* sysdeps/powerpc/powerpc64/power8/fpu/w_expf.c: New file.
* sysdeps/m68k/m680x0/fpu/w_exp2f.c: New file.
* sysdeps/m68k/m680x0/fpu/w_expf.c: New file.
* sysdeps/i386/fpu/w_exp2f.c: New file.
* sysdeps/i386/fpu/w_expf.c: New file.
* sysdeps/i386/i686/fpu/multiarch/w_expf.c: New file.
* sysdeps/x86_64/fpu/w_expf.c: New file.
Vectorized loops are used for sizes greater than 32B to improve
performance over power7 optimization. This shows as an average
of 25% improvement depending on the position of search
character. The performance is same for shorter strings.
A few math functions still use __fabs(f/l) rather than fabs, which
means they won't be inlined. Rename them so they are inlined.
Also add -fno-builtin-fabsl to nofpu powerpc makefile to work around
BZ #29253.
* sysdeps/ieee754/dbl-64/e_lgamma_r.c
(__ieee754_lgamma_r): Use fabs rather than __fabs.
* sysdeps/ieee754/dbl-64/e_log10.c (__ieee754_log10): Likewise.
* sysdeps/ieee754/dbl-64/e_log2.c (__ieee754_log2): Likewise.
* sysdeps/ieee754/flt-32/e_lgammaf_r.c
(__ieee754_lgammaf_r): Use fabsf rather than __fabsf.
* sysdeps/ieee754/flt-32/e_log10f.c (__ieee754_log10f): Likewise.
* sysdeps/ieee754/flt-32/e_log2f.c (__ieee754_log2f): Likewise.
* sysdeps/ieee754/ldbl-128/e_lgammal_r.c
(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
* sysdeps/ieee754/ldbl-128/e_log10l.c (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128/e_log2l.c (__ieee754_log2l): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c
(__ieee754_lgammal_r): Use fabsl rather than __fabsl.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c (__ieee754_log10l): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c (__ieee754_log2l): Likewise.
* sysdeps/powerpc/nofpu/Makefile: Add -fno-builtin-fabsl for BZ #29253.
Simplify the C99 isgreater macros. Although some support was added
in GCC 2.97, not all targets added support until GCC 3.1. Therefore
only use the builtins in math.h from GCC 3.1 onwards, and defer to
generic macros otherwise. Improve the generic isunordered macro
to use compares rather than call fpclassify twice - this is not only
faster but also correct for signaling NaNs.
* math/math.h: Improve handling of C99 isgreater macros.
* sysdeps/alpha/fpu/bits/mathinline.h: Remove isgreater macros.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h: Likewise.
* sysdeps/powerpc/bits/mathinline.h: Likewise.
* sysdeps/sparc/fpu/bits/mathinline.h: Likewise.
* sysdeps/x86/fpu/bits/mathinline.h: Likewise.
On powerpc64le, compiler support for float128 is not enabled by default
on gcc. To enable it, the flag -mfloat128 must be passed as a command
line option to the compiler. This means that only the few files that
actively have -mfloat128 passed as an argument get compiler support for
float128, whereas all other files don't.
When -mfloat128 becomes enabled by default on powerpc [1], all the files
that do not currently have compiler support for float128 enabled during
their compilation, will start to have it. This will lead to build
errors in s_finite.c, s_isinf.c, and s_isnan.c.
The errors are due to the unintended macro expansion of __finitef128 to
__redirect_finitef128 in math/bits/mathcalls-helper-functions.h. In
that header, __MATHDECL_1 takes '__finite' and 'f128' as arguments and
concatenates them. However, since '__finite' has been redefined in
s_finite.c, the function declaration becomes __redirect_finitef128:
extern int __redirect___finitef128 (_Float128 __value) __attribute__ ((__nothrow__ )) __attribute__ ((__const__));
This declaration itself is OK. The problem arises when include/math.h
creates the hidden prototype ('hidden_proto (__finitef128)'), which
expands to:
extern __typeof (__finitef128) __finitef128 __attribute__ ((visibility ("hidden")));
Since __finitef128 is not declared, __typeof fails. This effect was
already true for the 'float' and 'long double' versions and is now true
for float128. Likewise for isinsff128 and isnanf128.
This patch defines __finitef128 as __redirect___finitef128 in
sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c, similarly to what's
done for the float and long double versions of these functions, to get
rid of the build error. Likewise for isinff128 and isnanf128.
[1] https://gcc.gnu.org/ml/gcc-patches/2017-08/msg01028.html
Tested for powerpc64 and powerpc64le.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c
(__finitef128): Define to __redirect___finitef128.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c
(__isinff128): Define to __redirect___isinff128.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c
(__isnanf128): Define to __redirect___isnanf128.
On powerpc64le, not all files can have the flag -mfloat128 passed as an
option on the compile command, since that could conflict with other
flags, such as -mno-vsx. Each file that needs the flag, gets it through
a CFLAGS-filename variable on sysdeps/powerpc/powerpc64le/Makefile.
The test cases tst-strtod-nan-locale and tst-wcstod-nan-locale are
missing this flag.
Tested for powerpc64le.
* sysdeps/powerpc/powerpc64le/Makefile
(CFLAGS-tst-strtod-nan-locale.c): New variable.
(CFLAGS-tst-wcstod-nan-locale.c): New variable.
As per the section "3.1.4.2 Alignment Interrupts" of the "POWER8 Processor
User's Manual for the Single-Chip Module", alignment interrupt is reported
for misaligned stores in Caching-inhibited storage. As memset is used in
some drivers for DMA (like xorg), this patch avoids misaligned stores for
sizes less than 8 in memset.
Some math functions have to be distributed in libc because they're
required by printf.
libc and libm require their own builds of these functions, e.g. libc
functions have to call __stack_chk_fail_local in order to bypass the
PLT, while libm functions have to call __stack_chk_fail.
While math/Makefile treat the generic cases, i.e. s_isinff, the
multiarch Makefile has to treat its own files, i.e. s_isinff-ppc64.
[BZ #21745]
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile:
[$(subdir) = math] (sysdep_calls): New variable. Has the
previous contents of sysdep_routines, but re-sorted..
[$(subdir) = math] (sysdep_routines): Re-use the contents from
sysdep_calls.
[$(subdir) = math] (libm-sysdep_routines): Remove the functions
defined in sysdep_calls and replace by the respective m_* names.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S:
(compat_symbol): Undefine to avoid duplicated compat symbols in
libc.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
When signaling nans are enabled (with -fsignaling-nans), the C++ version
of iszero uses the fpclassify macro, which is defined with __MATH_TG.
However, when support for float128 is available, __MATH_TG uses the
builtin __builtin_types_compatible_p, which is only available in C mode.
This patch refactors the C++ version of iszero so that it uses function
overloading to select between the floating-point types, instead of
relying on fpclassify and __MATH_TG.
Tested for powerpc64le, s390x, x86_64, and with build-many-glibcs.py.
[BZ #21930]
* math/math.h [defined __cplusplus && defined __SUPPORT_SNAN__]
(iszero): New C++ implementation that does not use
fpclassify/__MATH_TG/__builtin_types_compatible_p, when
signaling nans are enabled, since __builtin_types_compatible_p
is a C-only feature.
* math/test-math-iszero.cc: When __HAVE_DISTINCT_FLOAT128 is
defined, include ieee754_float128.h for access to the union and
member ieee854_float128.ieee.
[__HAVE_DISTINCT_FLOAT128] (do_test): Call check_float128.
[__HAVE_DISTINCT_FLOAT128] (check_float128): New function.
* sysdeps/powerpc/powerpc64le/Makefile [subdir == math]
(CXXFLAGS-test-math-iszero.cc): Add -mfloat128 to the build
options of test-math-zero on powerpc64le.
This patch removes the powerpc32-specific wrappers for sqrt and sqrtf.
These wrappers, by adding architecture-specific uses of _LIB_VERSION
and __kernel_standard, unnecessarily complicate cleanups of libm error
handling. They also do not serve a useful optimization purpose. GCC
knows about sqrt as a built-in function, and can generate direct calls
to a hardware square root instruction, either on its own, in the
-fno-math-errno case, or together with an inline check for the
argument being negative and a call to the out-of-line sqrt function
for error handling only in that case (and has been able to do so for a
long time). Thus in practice the wrapper will only be called only in
the case of negative arguments, which is not a case it is useful to
optimize for.
Tested with build-many-glibcs.py for powerpc-linux-gnu-power4.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrt_compat-power5.S:
Remove file.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrt_compat-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrt_compat.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrtf_compat-power5.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrtf_compat-ppc32.S:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/w_sqrtf_compat.c:
Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(libm-sysdep-routines): Remove w_sqrt_compat-power5,
w_sqrt_compat-ppc32, w_sqrtf_compat-power5 and
w_sqrtf_compat-ppc32.
During the development of float128 on powerpc64le, the ulps have been
generated since early versions of the patches. On those versions, the
functions gamma and pow10 were mistakenly thought to be part of the API.
After review, the functions were removed, however the ulps for them were
carried in the ulps file.
This patch removes such entries from the ulps file, as well as it
shrinks the ulps for the cpow and lgamma functions.
Tested for powerpc64le.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
The macro __MATH_TG contains the logic to select between long double and
_Float128, when these types are ABI-distinct. This logic relies on
__builtin_types_compatible_p, which is not available in C++ mode.
On the other hand, C++ function overloading provides the means to
distinguish between the floating-point types. The overloading
resolution will match the correct parameter regardless of type
qualifiers, i.e.: const and volatile.
Tested for powerpc64le, s390x, and x86_64.
* math/math.h [defined __cplusplus] (issignaling): Provide a C++
definition for issignaling that does not rely on __MATH_TG,
since __MATH_TG uses __builtin_types_compatible_p, which is only
available in C mode.
(CFLAGS-test-math-issignaling.cc): New variable.
* math/Makefile [CXX] (tests): Add test-math-issignaling.
* math/test-math-issignaling.cc: New test for C++ implementation
of type-generic issignaling.
* sysdeps/powerpc/powerpc64le/Makefile [subdir == math]
(CXXFLAGS-test-math-issignaling.cc): Add -mfloat128 to the build
options of test-math-issignaling on powerpc64le.
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling. matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.
The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).
Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used. If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).
I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).
Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128. This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly. Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.
I intend to move to the new wrappers for static libm and new ports in
followup patches. I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed. GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed). Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for. But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.
Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).
As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
[__USE_MISC] (_LIB_VERSION): Likewise.
[__USE_MISC] (struct exception): Likewise.
[__USE_MISC] (matherr): Likewise.
[__USE_MISC] (DOMAIN): Likewise.
[__USE_MISC] (SING): Likewise.
[__USE_MISC] (OVERFLOW): Likewise.
[__USE_MISC] (UNDERFLOW): Likewise.
[__USE_MISC] (TLOSS): Likewise.
[__USE_MISC] (PLOSS): Likewise.
[__USE_MISC] (HUGE): Likewise.
[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
* math/math-svid-compat.h: New file.
* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
and matherrl.
* include/math.h [!_ISOMAC] (__matherr): Remove.
* manual/arith.texi (FP Exceptions): Do not document matherr.
* math/Makefile (tests): Change test-matherr to test-matherr-3.
(tests-internal): New variable.
(install-lib): Do not add libieee.a.
(non-lib.a): Likewise.
(extra-objs): Do not add libieee.a and ieee-math.o.
(CPPFLAGS-s_lib_version.c): Remove variable.
($(objpfx)libieee.a): Remove rule.
($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
* math/ieee-math.c: Remove.
* math/libm-test-support.c (matherr): Remove.
* math/test-matherr.c: Use <support/test-driver.c>. Add copyright
and license notices. Include <math-svid-compat.h> and
<shlib-compat.h>.
(matherr): Undefine as macro. Use compat_symbol_reference.
(_LIB_VERSION): Likewise.
* math/test-matherr-2.c: New file.
* math/test-matherr-3.c: Likewise.
* sysdeps/generic/math_private.h (__kernel_standard): Remove
declaration.
(__kernel_standard_f): Likewise.
(__kernel_standard_l): Likewise.
* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(_LIB_VERSION): Undefine as macro.
(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define
only if [LIBM_SVID_COMPAT || !defined SHARED]. If
[LIBM_SVID_COMPAT], use compat_symbol.
* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(matherr): Undefine as macro.
(__matherr): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
compat_symbol_reference.
[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
(MATHERR_D): Remove declaration.
[!_LIBC] (_LIB_VERSION_TYPE): Likewise
[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
[LIBM_BUILD] (pmatherrf): Likewise.
[LIBM_BUILD] (pmatherr): Likewise.
[LIBM_BUILD] (pmatherrl): Likewise.
(DOMAIN): Likewise.
(SING): Likewise.
(OVERFLOW): Likewise.
(UNDERFLOW): Likewise.
(TLOSS): Likewise.
(PLOSS): Likewise.
* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
(__matherrf): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
(__matherrl): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* math/lgamma-compat.h: Include <math-svid-compat.h>.
* math/w_acos_compat.c: Likewise.
* math/w_acosf_compat.c: Likewise.
* math/w_acosh_compat.c: Likewise.
* math/w_acoshf_compat.c: Likewise.
* math/w_acoshl_compat.c: Likewise.
* math/w_acosl_compat.c: Likewise.
* math/w_asin_compat.c: Likewise.
* math/w_asinf_compat.c: Likewise.
* math/w_asinl_compat.c: Likewise.
* math/w_atan2_compat.c: Likewise.
* math/w_atan2f_compat.c: Likewise.
* math/w_atan2l_compat.c: Likewise.
* math/w_atanh_compat.c: Likewise.
* math/w_atanhf_compat.c: Likewise.
* math/w_atanhl_compat.c: Likewise.
* math/w_cosh_compat.c: Likewise.
* math/w_coshf_compat.c: Likewise.
* math/w_coshl_compat.c: Likewise.
* math/w_exp10_compat.c: Likewise.
* math/w_exp10f_compat.c: Likewise.
* math/w_exp10l_compat.c: Likewise.
* math/w_exp2_compat.c: Likewise.
* math/w_exp2f_compat.c: Likewise.
* math/w_exp2l_compat.c: Likewise.
* math/w_fmod_compat.c: Likewise.
* math/w_fmodf_compat.c: Likewise.
* math/w_fmodl_compat.c: Likewise.
* math/w_hypot_compat.c: Likewise.
* math/w_hypotf_compat.c: Likewise.
* math/w_hypotl_compat.c: Likewise.
* math/w_j0_compat.c: Likewise.
* math/w_j0f_compat.c: Likewise.
* math/w_j0l_compat.c: Likewise.
* math/w_j1_compat.c: Likewise.
* math/w_j1f_compat.c: Likewise.
* math/w_j1l_compat.c: Likewise.
* math/w_jn_compat.c: Likewise.
* math/w_jnf_compat.c: Likewise.
* math/w_jnl_compat.c: Likewise.
* math/w_lgamma_main.c: Likewise.
* math/w_lgamma_r_compat.c: Likewise.
* math/w_lgammaf_main.c: Likewise.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_main.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* math/w_log10_compat.c: Likewise.
* math/w_log10f_compat.c: Likewise.
* math/w_log10l_compat.c: Likewise.
* math/w_log2_compat.c: Likewise.
* math/w_log2f_compat.c: Likewise.
* math/w_log2l_compat.c: Likewise.
* math/w_log_compat.c: Likewise.
* math/w_logf_compat.c: Likewise.
* math/w_logl_compat.c: Likewise.
* math/w_pow_compat.c: Likewise.
* math/w_powf_compat.c: Likewise.
* math/w_powl_compat.c: Likewise.
* math/w_remainder_compat.c: Likewise.
* math/w_remainderf_compat.c: Likewise.
* math/w_remainderl_compat.c: Likewise.
* math/w_scalb_compat.c: Likewise.
* math/w_scalbf_compat.c: Likewise.
* math/w_scalbl_compat.c: Likewise.
* math/w_sinh_compat.c: Likewise.
* math/w_sinhf_compat.c: Likewise.
* math/w_sinhl_compat.c: Likewise.
* math/w_sqrt_compat.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* math/w_tgamma_compat.c: Likewise.
* math/w_tgammaf_compat.c: Likewise.
* math/w_tgammal_compat.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/k_standard.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
POWER ISA 3.0 introduces the xssqrtqp instructions, which expects
operands to be in Vector Registers (Altivec/VMX), even though this
instruction belongs to the Vector-Scalar Instruction Set.
In GCC's Extended Assembly for POWER, the 'wq' register constraint is
provided for use with IEEE 754 128-bit floating-point values. However,
this constraint does not limit the register allocation to Vector
Registers (Altivec/VMX) and could assign a Vector-Scalar Register (VSX)
to the operands of the instruction.
This patch changes the register constraint used in sqrtf128 from 'wq' to
'v', in order to request a Vector Register (Altivec/VMX) for use with
the xssqrtqp instruction.
Tested for powerpc64le and --with-cpu=power9.
[BZ #21941]
* sysdeps/powerpc/fpu/math_private.h (__ieee754_sqrtf128): Since
xssqrtqp requires operands to be in Vector Registers
(Altivec/VMX), replace the register constraint 'wq' with 'v'.
* sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c
(__ieee754_sqrtf128): Likewise.
This makes the __tls_get_addr_opt test run as a shared library, and so
actually test that DTPMOD64/DTPREL64 pairs are processed by ld.so to
support the __tls_get_adfr_opt call stub fast return. After a
2017-01-24 patch (binutils f0158f4416) ld.bfd no longer emitted
unnecessary dynamic relocations against local thread variables,
instead setting up the __tls_index GOT entries for the call stub fast
return. This meant tst-tlsopt-powerpc passed but did not check ld.so
relocation support. After a 2017-07-16 patch (binutils 676ee2b5fa)
ld.bfd no longer set up the __tls_index GOT entries for the call stub
fast return, and tst-tlsopt-powerpc failed.
Compiling mod-tlsopt-powerpc.c with -DSHARED exposed a bug in
powerpc64/tls-macros.h, which defines a __TLS_GET_ADDR macro that
clashes with one defined in dl-tls.h. The tls-macros.h version is
only used in that file, so delete it and expand.
* sysdeps/powerpc/mod-tlsopt-powerpc.c: Extract from
tst-tlsopt-powerpc.c with function name change and no test harness.
* sysdeps/powerpc/tst-tlsopt-powerpc.c: Remove body of test.
Call tls_get_addr_opt_test.
* sysdeps/powerpc/Makefile (LDFLAGS-tst-tlsopt-powerpc): Don't define.
(modules-names): Add mod-tlsopt-powerpc.
(mod-tlsopt-powerpc.so-no-z-defs): Define.
(tst-tlsopt-powerpc): Depend on .so.
* sysdeps/powerpc/powerpc64/tls-macros.h (__TLS_GET_ADDR): Don't
define. Expand use in TLS_GD and TLS_LD.
The patch proposed by Peter Bergner [1] to libgcc in order to fix
[BZ #21707] adds a dependency on a symbol provided by the loader,
forcing the loader to be linked to tests after libgcc was linked.
It also requires to read the thread pointer during IRELA relocations.
Tested on powerpc, powerpc64, powerpc64le, s390x and x86_64.
[1] https://sourceware.org/ml/libc-alpha/2017-06/msg01383.html
[BZ #21707]
* csu/libc-start.c (LIBC_START_MAIN): Perform IREL{,A}
relocations before or after initializing the TCB on statically
linked executables. That's a per-architecture definition.
* elf/rtld.c (dl_main): Add a comment about thread-local
variables initialization.
* sysdeps/generic/libc-start.h: New file. Define
ARCH_APPLY_IREL and ARCH_SETUP_IREL.
* sysdeps/powerpc/Makefile:
[$(subdir) = elf && $(multi-arch) != no] (tests-static-internal): Add tst-tlsifunc-static.
[$(subdir) = elf && $(multi-arch) != no && $(build-shared) == yes]
(tests-internal): Add tst-tlsifunc.
* sysdeps/powerpc/tst-tlsifunc.c: New file.
* sysdeps/powerpc/tst-tlsifunc-static.c: Likewise.
* sysdeps/powerpc/powerpc64le/Makefile (f128-loader-link): New
variable.
[$(subdir) = math] (test-float128% test-ifloat128%): Force
linking to the loader after linking to libgcc.
[$(subdir) = wcsmbs || $(subdir) = stdlib] (bug-strtod bug-strtod2)
(bug-strtod2 tst-strtod-round tst-wcstod-round tst-strtod6 tst-strrom)
(tst-strfrom-locale strfrom-skeleton): Likewise.
* sysdeps/unix/sysv/linux/powerpc/libc-start.h: New file. Define
ARCH_APPLY_IREL and ARCH_SETUP_IREL.
On powerpc64le, the compilation of the files related to float128 support
requires the option -mfloat128 to be passed to gcc. However, not all
possible object suffixes were covered in the Makefile. This patch uses
$(all-object-suffixes) in all remaining rules.
Tested for powerpc64le.
* sysdeps/powerpc/powerpc64le/Makefile: Use $(all-object-suffixes)
to iterate over all possible object suffixes. Add a comment
explaining the use of sysdep-CFLAGS instead of CFLAGS.
In math/math.h, __MATH_TG will expand signbit to __builtin_signbit*,
e.g.: __builtin_signbitf128, before GCC 6. However, there has never
been a __builtin_signbitf128 in GCC and the type-generic builtin is
only available since GCC 6. For older GCC, this patch defines
__builtin_signbitf128 to __signbitf128, so that the internal function
is used instead of the non-existent builtin.
This patch also changes the implementation of __signbitf128, because
it was reusing the implementation of __signbitl from ldbl-128, which
calls __builtin_signbitl. Using the long double version of the
builtin is not correct on machines where _Float128 is ABI-distinct
from long double (i.e.: ia64, powerpc64le, x86, x86_84). The new
implementation does not rely on builtins when being built with GCC
versions older than 6.0.
The new code does not currently affect powerpc64le builds, because
only GCC 6.2 fulfills the requirements from configure. It might
affect powerpc64le builds if those requirements are backported to
older versions of the compiler. The new code affects x86_64 builds,
since glibc is supposed to build correctly with older versions of GCC.
Tested for powerpc64le and x86_64.
* include/math.h (__signbitf128): Define as hidden.
* sysdeps/ieee754/float128/s_signbitf128.c (__signbitf128):
Reimplement without builtins.
* sysdeps/ia64/bits/floatn.h [!__GNUC_PREREQ (6, 0)]
(__builtin_signbitf128): Define to __signbitf128.
* sysdeps/powerpc/bits/floatn.h: Likewise.
* sysdeps/x86/bits/floatn.h: Likewise.
The ucontext_t type has a tag struct ucontext. As with previous such
issues for siginfo_t and stack_t, this tag is not permitted by POSIX
(is not in a reserved namespace), and so namespace conformance means
breaking C++ name mangling for this type.
In this case, the type does need to have some tag rather than just a
typedef name, because it includes a pointer to itself. This patch
uses struct ucontext_t as the new tag, so the type is mangled as
ucontext_t (the POSIX *_t reservation applies in all namespaces, not
just the namespace of ordinary identifiers). Another reserved name
such as struct __ucontext could of course be used.
Because of other namespace issues, this patch does not by itself fix
bug 21457 or allow any XFAILs to be removed.
Tested for x86_64, and with build-many-glibcs.py.
[BZ #21457]
* sysdeps/arm/sys/ucontext.h (struct ucontext): Rename to struct
ucontext_t.
* sysdeps/generic/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/i386/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/m68k/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/mips/sys/ucontext.h (struct ucontext): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h (struct
ucontext): Likewise.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h (struct
ucontext): Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h (struct ucontext):
Likewise.
* sysdeps/powerpc/powerpc32/backtrace.c (struct
rt_signal_frame_32): Likewise.
* sysdeps/powerpc/powerpc64/backtrace.c (struct signal_frame_64):
Likewise.
* sysdeps/unix/sysv/linux/aarch64/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/arm/register-dump.h (register_dump):
Likewise.
* sysdeps/unix/sysv/linux/arm/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/hppa/profil-counter.h
(__profil_counter): Likewise.
* sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h
(SIGCONTEXT): Likewise.
* sysdeps/unix/sysv/linux/mips/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/nios2/kernel_rt_sigframe.h (struct
kernel_rt_sigframe): Likewise.
* sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/sh/makecontext.S (__makecontext):
Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/makecontext.c
(__start_context): Likewise.
* sysdeps/unix/sysv/linux/tile/sigcontextinfo.h (SIGCONTEXT):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/register-dump.h (register_dump):
Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h (SIGCONTEXT):
Likewise.
This patch adds ULPs for the float128 type, updates the abilist for libc
and libm, and adds the files bits/floatn.h and float128-abi.h, in order to
enable the new type for powerpc64le.
This patch also adds the implementation of sqrtf128 for powerpc64le, since
it is not implemented in libgcc. The sfp-machine.h header is taken from
libgcc.
Tested for powerpc64le (GCC 6.2 and GCC 7.1), powerpc64 and s390x.
* manual/math.texi (Mathematics): Mention the enabling of float128
for powerpc64le.
* sysdeps/powerpc/bits/floatn.h: New file.
* sysdeps/powerpc/fpu/libm-test-ulps: Regenerated.
* sysdeps/powerpc/fpu/math_private.h:
(__ieee754_sqrtf128): New inline override.
* sysdeps/powerpc/powerpc64le/Implies-before: New file.
* sysdeps/powerpc/powerpc64le/Makefile: New file.
* sysdeps/powerpc/powerpc64le/fpu/e_sqrtf128.c: New file.
* sysdeps/powerpc/powerpc64le/fpu/sfp-machine.h: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/e_sqrtf128.c: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Updated.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/float128-abi.h:
New file.
Support for powerpc64le requires POWER8 or newer processors. Builds for
older processors are not tested. Require at least POWER8 to avoid
unintentional builds.
* sysdeps/powerpc/powerpc64le/configure.ac: Check for POWER8.
* sysdeps/powerpc/powerpc64le/configure: Update.
On powerpc64le, support for float128 will be enabled, which requires some
compiler features to be present. This patch adds a configure test to check
for such features, which are provided for powerpc64le since GCC 6.2.
Tested for powerpc64 and powerpc64le.
* INSTALL: Regenerate.
* manual/install.texi (Recommended Tools for Compilation): Mention
the powerpc64le-specific requirement in the manual.
* sysdeps/powerpc/powerpc64le/configure.ac: New file with checks
for the compiler features required for building float128.
* sysdeps/powerpc/powerpc64le/configure: New, auto-generated file.
sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-ppc64.c should fall back to
sysdeps/powerpc/fpu/s_sinf.c not to sysdeps/ieee754/flt-32/s_sinf.c.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-ppc64.c: Change
s_sinf.c from sysdeps/ieee754/flt-32/ to sysdeps/powerpc/fpu/.
Linux commit ID a4700a26107241cc7b9ac8528b2c6714ff99983d reserved 2 more
bits for the instructions darn (Deliver a Random Number) and scv (System
Call Vectored).
Linux commit ID 6997e57d693b07289694239e52a10d2f02c3a46f reserved
another bit for internal usage.
* sysdeps/powerpc/bits/hwcap.h: Add PPC_FEATURE2_DARN and
PPC_FEATURE2_SCV.
* sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add scv
and darn.
<locale.h> is specified to define locale_t in POSIX.1-2008, and so are
all of the headers that define functions that take locale_t arguments.
Under _GNU_SOURCE, the additional headers that define such functions
have also always defined locale_t. Therefore, there is no need to use
__locale_t in public function prototypes, nor in any internal code.
* ctype/ctype-c99_l.c, ctype/ctype.h, ctype/ctype_l.c
* include/monetary.h, include/stdlib.h, include/time.h
* include/wchar.h, locale/duplocale.c, locale/freelocale.c
* locale/global-locale.c, locale/langinfo.h, locale/locale.h
* locale/localeinfo.h, locale/newlocale.c
* locale/nl_langinfo_l.c, locale/uselocale.c
* localedata/bug-usesetlocale.c, localedata/tst-xlocale2.c
* stdio-common/vfscanf.c, stdlib/monetary.h, stdlib/stdlib.h
* stdlib/strfmon_l.c, stdlib/strtod_l.c, stdlib/strtof_l.c
* stdlib/strtol.c, stdlib/strtol_l.c, stdlib/strtold_l.c
* stdlib/strtoll_l.c, stdlib/strtoul_l.c, stdlib/strtoull_l.c
* string/strcasecmp.c, string/strcoll_l.c, string/string.h
* string/strings.h, string/strncase.c, string/strxfrm_l.c
* sysdeps/ieee754/float128/strtof128_l.c
* sysdeps/ieee754/float128/wcstof128.c
* sysdeps/ieee754/float128/wcstof128_l.c
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c
* sysdeps/ieee754/ldbl-64-128/strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-strfmon_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-strtold_l.c
* sysdeps/ieee754/ldbl-opt/nldbl-wcstold_l.c
* sysdeps/powerpc/powerpc32/power7/strcasecmp.S
* sysdeps/powerpc/powerpc64/power7/strcasecmp.S
* sysdeps/x86_64/strcasecmp_l-nonascii.c
* sysdeps/x86_64/strncase_l-nonascii.c, time/strftime_l.c
* time/strptime_l.c, time/time.h, wcsmbs/mbsrtowcs_l.c
* wcsmbs/wchar.h, wcsmbs/wcscasecmp.c, wcsmbs/wcsncase.c
* wcsmbs/wcstod.c, wcsmbs/wcstod_l.c, wcsmbs/wcstof.c
* wcsmbs/wcstof_l.c, wcsmbs/wcstol_l.c, wcsmbs/wcstold.c
* wcsmbs/wcstold_l.c, wcsmbs/wcstoll_l.c, wcsmbs/wcstoul_l.c
* wcsmbs/wcstoull_l.c, wctype/iswctype_l.c
* wctype/towctrans_l.c, wctype/wcfuncs_l.c
* wctype/wctrans_l.c, wctype/wctype.h, wctype/wctype_l.c:
Change all uses of __locale_t to locale_t.
These machine-dependent inline string functions have never been on by
default, and even if they were a good idea at the time they were
introduced, they haven't really been touched in ten to fifteen years
and probably aren't a good idea on current-gen processors. Current
thinking is that this class of optimization is best left to the
compiler.
* bits/string.h, string/bits/string.h
* sysdeps/aarch64/bits/string.h
* sysdeps/m68k/m680x0/m68020/bits/string.h
* sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h
* sysdeps/x86/bits/string.h: Delete file.
* string/string.h: Don't include bits/string.h.
* string/bits/string3.h: Rename to bits/string_fortified.h.
No need to undef various symbols that the removed headers
might have defined as macros.
* string/Makefile (headers): Remove bits/string.h, change
bits/string3.h to bits/string_fortified.h.
* string/string-inlines.c: Update commentary. Remove definitions
of various macros that nothing looks at anymore. Don't directly
include bits/string.h. Set _STRING_INLINE_unaligned here, based on
compiler-predefined macros.
* string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY
_is_ defined, provide internal hidden alias __strncat.
* include/string.h: Declare internal hidden alias __strncat.
Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is
not defined.
* include/bits/string3.h: Rename to bits/string_fortified.h,
update to match above.
* sysdeps/i386/string-inlines.c: Define compat symbols for
everything formerly defined by sysdeps/x86/bits/string.h.
Make existing definitions into compat symbols as well.
Remove some no-longer-necessary messing around with macros.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c
* sysdeps/s390/multiarch/mempcpy.c
No need to define _HAVE_STRING_ARCH_mempcpy.
Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT.
* sysdeps/i386/i686/multiarch/strncat-c.c
* sysdeps/s390/multiarch/strncat-c.c
* sysdeps/x86_64/multiarch/strncat-c.c
Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, that have no requirement on r2 or
r12 and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions.
This patch implements the ld.so changes necessary for this
optimization. ld.so needs to check that an optimized plt call
sequence is in fact calling a function implemented with localentry:0,
end emit a fatal error otherwise.
The elf/testobj6.c change is to stop "error while loading shared
libraries: expected localentry:0 `preload'" when running
elf/preloadtest, which we'd get otherwise.
* elf/elf.h (PPC64_OPT_LOCALENTRY): Define.
* sysdeps/alpha/dl-machine.h (elf_machine_fixup_plt): Add
refsym and sym parameters. Adjust callers.
* sysdeps/aarch64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/arm/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/generic/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/hppa/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/i386/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/ia64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/m68k/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/microblaze/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/mips/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/nios2/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_fixup_plt):
Likewise.
* sysdeps/s390/s390-32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/s390/s390-64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sh/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc32/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/sparc/sparc64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/tile/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/x86_64/dl-machine.h (elf_machine_fixup_plt): Likewise.
* sysdeps/powerpc/powerpc64/dl-machine.c (_dl_error_localentry): New.
(_dl_reloc_overflow): Increase buffser size. Formatting.
* sysdeps/powerpc/powerpc64/dl-machine.h (ppc64_local_entry_offset):
Delete reloc param, add refsym and sym. Check optimized plt
call stubs for localentry:0 functions. Adjust callers.
(elf_machine_fixup_plt, elf_machine_plt_conflict): Add refsym
and sym parameters. Adjust callers.
(_dl_reloc_overflow): Move attribute.
(_dl_error_localentry): Declare.
* elf/dl-runtime.c (_dl_fixup): Save original sym. Pass
refsym and sym to elf_machine_fixup_plt.
* elf/testobj6.c (preload): Call printf.
Makes __stpncpy_power8 call __memset_power8 directly rather than via an
IFUNC. Fixes a missing _mcount, and removes some redundant NOPS. The
*_is_local defines are also used in a followup patch.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power7.S: Define
MEMSET_is_local.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Likewise.
Define MEMSET.
* sysdeps/powerpc/powerpc64/multiarch/strstr-power7.S: Define
STRLEN_is_local, STRNLEN_is_local, and STRCHR_is_local.
* sysdeps/powerpc/powerpc64/power7/strstr.S: Likewise. Don't add
nop after local calls.
* sysdeps/powerpc/powerpc64/power7/strncpy.S: Define MEMSET_is_local.
Don't add nop after local call.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise. Add missing
CALL_MCOUNT.
.align on some targets takes a byte alignment, on others like powerpc,
log2 of the byte alignment. It's a good idea to avoid .align,
particularly since x86 and powerpc are different. This patch fixes
the occurrences of .align in powerpc64/sysdep.h, renames DOT_LABEL
since the macro doesn't have anything to do with adding dots, removes
extraneous semicolons, and fixes some formatting.
* sysdeps/powerpc/powerpc64/sysdep.h: Formatting.
(FUNC_LABEL): Rename from DOT_LABEL.
(ENTRY_1): Use FUNC_LABEL and remove leading space from label.
Use .p2align rather than .align.
(TRACEBACK, TRACEBACK_MASK): Use .p2align rather than .align.
(ABORT_TRANSACTION): Likewise.
(ENTRY_1, ENTRY_2, END_2, LOCALENTRY): Remove unnecessary semicolons,
particularly at end. Add semicolon at invocation as necessary.
(TRACEBACK, TRACEBACK_MASK, PSEUDO, PSEUDO_NOERRNO): Likewise.
(PSEUDO_ERRVAL, PPC64_LOAD_FUNCPTR, OPD_ENT): Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-power8.S (ENTRY,
END): Adjust to suit.
I think FRAME_PARM[1-9]_SAVE confuse the code, particularly
FRAME_PARM9_SAVE. There are only 8 parameter save slots!
* sysdeps/powerpc/powerpc64/sysdep.h: (FRAME_BACKCHAIN,
FRAME_CR_SAVE, FRAME_LR_SAVE): Move out of conditional.
(FRAME_PARM1_SAVE, FRAME_PARM2_SAVE, FRAME_PARM3_SAVE,
FRAME_PARM4_SAVE, FRAME_PARM5_SAVE, FRAME_PARM6_SAVE,
FRAME_PARM7_SAVE, FRAME_PARM8_SAVE, FRAME_PARM9_SAVE): Delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/makecontext.S: Replace
uses of FRAME_PARM[1-9]_SAVE with FRAME_PARM_SAVE plus offset.
The macros used in assembly were broken on powerpc64 ELFv1.
* sysdeps/powerpc/powerpc64/sysdep.h: (call_mcount_parm_offset): Delete.
(SAVE_ARG, REST_ARG, CFI_SAVE_ARG): Correct.
This patch optimizes the generic spinlock code.
The type pthread_spinlock_t is a typedef to volatile int on all archs.
Passing a volatile pointer to the atomic macros which are not mapped to the
C11 atomic builtins can lead to extra stores and loads to stack if such
a macro creates a temporary variable by using "__typeof (*(mem)) tmp;".
Thus, those macros which are used by spinlock code - atomic_exchange_acquire,
atomic_load_relaxed, atomic_compare_exchange_weak - have to be adjusted.
According to the comment from Szabolcs Nagy, the type of a cast expression is
unqualified (see http://www.open-std.org/jtc1/sc22/wg14/www/docs/dr_423.htm):
__typeof ((__typeof (*(mem)) *(mem)) tmp;
Thus from spinlock perspective the variable tmp is of type int instead of
type volatile int. This patch adjusts those macros in include/atomic.h.
With this construct GCC >= 5 omits the extra stores and loads.
The atomic macros are replaced by the C11 like atomic macros and thus
the code is aligned to it. The pthread_spin_unlock implementation is now
using release memory order instead of sequentially consistent memory order.
The issue with passed volatile int pointers applies to the C11 like atomic
macros as well as the ones used before.
I've added a glibc_likely hint to the first atomic exchange in
pthread_spin_lock in order to return immediately to the caller if the lock is
free. Without the hint, there is an additional jump if the lock is free.
I've added the atomic_spin_nop macro within the loop of plain reads.
The plain reads are also realized by C11 like atomic_load_relaxed macro.
The new define ATOMIC_EXCHANGE_USES_CAS determines if the first try to acquire
the spinlock in pthread_spin_lock or pthread_spin_trylock is an exchange
or a CAS. This is defined in atomic-machine.h for all architectures.
The define SPIN_LOCK_READS_BETWEEN_CMPXCHG is now removed.
There is no technical reason for throwing in a CAS every now and then,
and so far we have no evidence that it can improve performance.
If that would be the case, we have to adjust other spin-waiting loops
elsewhere, too! Using a CAS loop without plain reads is not a good idea
on many targets and wasn't used by one. Thus there is now no option to
do so.
Architectures are now using the generic spinlock automatically if they
do not provide an own implementation. Thus the pthread_spin_lock.c files
in sysdeps folder are deleted.
ChangeLog:
* NEWS: Mention new spinlock implementation.
* include/atomic.h:
(__atomic_val_bysize): Cast type to omit volatile qualifier.
(atomic_exchange_acq): Likewise.
(atomic_load_relaxed): Likewise.
(ATOMIC_EXCHANGE_USES_CAS): Check definition.
* nptl/pthread_spin_init.c (pthread_spin_init):
Use atomic_store_relaxed.
* nptl/pthread_spin_lock.c (pthread_spin_lock):
Use C11-like atomic macros.
* nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* nptl/pthread_spin_unlock.c (pthread_spin_unlock):
Use atomic_store_release.
* sysdeps/aarch64/nptl/pthread_spin_lock.c: Delete File.
* sysdeps/arm/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/hppa/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/m68k/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/microblaze/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/mips/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/nios2/nptl/pthread_spin_lock.c: Likewise.
* sysdeps/aarch64/atomic-machine.h (ATOMIC_EXCHANGE_USES_CAS): Define.
* sysdeps/alpha/atomic-machine.h: Likewise.
* sysdeps/arm/atomic-machine.h: Likewise.
* sysdeps/i386/atomic-machine.h: Likewise.
* sysdeps/ia64/atomic-machine.h: Likewise.
* sysdeps/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/m68k/m680x0/m68020/atomic-machine.h: Likewise.
* sysdeps/microblaze/atomic-machine.h: Likewise.
* sysdeps/mips/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc32/atomic-machine.h: Likewise.
* sysdeps/powerpc/powerpc64/atomic-machine.h: Likewise.
* sysdeps/s390/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc32/sparcv9/atomic-machine.h: Likewise.
* sysdeps/sparc/sparc64/atomic-machine.h: Likewise.
* sysdeps/tile/tilegx/atomic-machine.h: Likewise.
* sysdeps/tile/tilepro/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/hppa/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/nios2/atomic-machine.h: Likewise.
* sysdeps/unix/sysv/linux/sh/atomic-machine.h: Likewise.
* sysdeps/x86_64/atomic-machine.h: Likewise.
The types affected are __sig_atomic_t, sig_atomic_t, __sigset_t,
sigset_t, sigval_t, sigevent_t, and siginfo_t. __sig_atomic_t is a
scalar, so it's now directly available from bits/types.h. The others
get bits/types/ headers.
Side effects include: There have been small changes to which
non-signal headers expose which subset of the signal-related types.
A couple of architectures' nested siginfo_t fields had to be renamed
to prevent undesired macro expansion. Internal code that wants to
manipulate signal masks must now include <sigsetops.h> (which is not
installed) and should be aware that __sigaddset, __sigandset,
__sigdelset, __sigemptyset, and __sigorset no longer return a value
(unlike the public API). Relatedly, the public signal.h no longer
declares any of those functions. The obsolete sigmask() macro no
longer has a system-specific definition -- in the cases where it
matters, it didn't work anyway.
New Linux architectures should create bits/siginfo-arch.h and/or
bits/siginfo-consts-arch.h to customize their siginfo_t, rather than
duplicating everything in bits/siginfo.h (which no longer exists).
Add new __SI_* macros if necessary. Ports to other operating systems
are strongly encouraged to generalize this scheme further.
* bits/sigevent-consts.h
* bits/siginfo-consts.h
* bits/types/__sigset_t.h
* bits/types/sigevent_t.h
* bits/types/siginfo_t.h
* sysdeps/unix/sysv/linux/bits/sigevent-consts.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts.h
* sysdeps/unix/sysv/linux/bits/types/__sigset_t.h
* sysdeps/unix/sysv/linux/bits/types/sigevent_t.h
* sysdeps/unix/sysv/linux/bits/types/siginfo_t.h:
New system-dependent bits headers.
* sysdeps/unix/sysv/linux/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-arch.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo-consts-arch.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo-arch.h:
New Linux-only system-dependent bits headers.
* signal/bits/types/sig_atomic_t.h
* signal/bits/types/sigset_t.h
* signal/bits/types/sigval_t.h:
New non-system-dependent bits headers.
* sysdeps/generic/sigsetops.h
* sysdeps/unix/sysv/linux/sigsetops.h:
New internal headers.
* include/bits/types/sig_atomic_t.h
* include/bits/types/sigset_t.h
* include/bits/types/sigval_t.h:
New wrappers.
* signal/sigsetops.h
* bits/siginfo.h
* bits/sigset.h
* sysdeps/unix/sysv/linux/bits/siginfo.h
* sysdeps/unix/sysv/linux/bits/sigset.h
* sysdeps/unix/sysv/linux/ia64/bits/siginfo.h
* sysdeps/unix/sysv/linux/mips/bits/siginfo.h
* sysdeps/unix/sysv/linux/s390/bits/siginfo.h
* sysdeps/unix/sysv/linux/sparc/bits/siginfo.h
* sysdeps/unix/sysv/linux/tile/bits/siginfo.h
* sysdeps/unix/sysv/linux/x86/bits/siginfo.h:
Deleted.
* signal/Makefile, sysdeps/unix/sysv/linux/Makefile:
Update lists of installed headers.
* posix/bits/types.h: Define __sig_atomic_t here.
* signal/signal.h: Use the new bits headers; no need to handle
__need_sig_atomic_t nor __need_sigset_t. Don't use __sigmask
to define sigmask.
* include/signal.h: No need to handle __need_sig_atomic_t
nor __need_sigset_t. Don't define __sigemptyset.
* io/sys/poll.h, setjmp/setjmp.h
* sysdeps/arm/sys/ucontext.h, sysdeps/generic/sys/ucontext.h
* sysdeps/i386/sys/ucontext.h, sysdeps/m68k/sys/ucontext.h
* sysdeps/mach/hurd/i386/bits/sigcontext.h
* sysdeps/mips/sys/ucontext.h, sysdeps/powerpc/novmxsetjmp.h
* sysdeps/pthread/bits/sigthread.h
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h:
Use bits/types/__sigset_t.h.
* misc/sys/select.h, posix/spawn.h
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h
* sysdeps/unix/sysv/linux/sys/epoll.h
* sysdeps/unix/sysv/linux/sys/signalfd.h:
Use bits/types/sigset_t.h.
* resolv/netdb.h, rt/mqueue.h: Use bits/types/sigevent_t.h.
* rt/aio.h: Use bits/types/sigevent_t.h and bits/sigevent-consts.h.
* socket/sys/socket.h: Don't include bits/sigset.h.
* login/utmp_file.c, shadow/lckpwdf.c, signal/sigandset.c
* signal/sigisempty.c, stdlib/abort.c, sysdeps/posix/profil.c
* sysdeps/posix/sigignore.c, sysdeps/posix/sigintr.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c
* sysdeps/posix/sprofil.c, sysdeps/posix/sysv_signal.c
* sysdeps/unix/sysv/linux/nptl-signals.h:
Include sigsetops.h.
* signal/sigaddset.c, signal/sigandset.c, signal/sigdelset.c
* signal/sigorset.c, stdlib/abort.c, sysdeps/posix/sigignore.c
* sysdeps/posix/signal.c, sysdeps/posix/sigset.c:
__sigaddset, __sigandset, __sigdelset, __sigemptyset, __sigorset
now return no value.
* signal/sigaddset.c, signal/sigdelset.c, signal/sigismem.c
Include <errno.h>, <signal.h>, and <sigsetops.h> instead of
"sigsetops.h".
* signal/sigsetops.c: Explicitly define __sigismember,
__sigaddset, and __sigdelset as compatibility symbols.
* signal/Versions: Correct commentary on __sigpause,
__sigaddset, __sigdelset, __sigismember.
* inet/rcmd.c: Include sigsetops.h. Convert old code using
__sigblock/__sigsetmask to use __sigprocmask and friends.
This implementation is based on the one already used at
sysdeps/powerpc/powerpc64/fpu/multiarch/s_sinf-power8.S.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
[$(subdir) = math] (libm-sysdep_routines): Add s_cosf-power8 and
s_cosf-ppc64.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf-power8.S: New file.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf-ppc64.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_cosf.c: Likewise.
* sysdeps/powerpc/powerpc64/power8/fpu/s_cosf.S: Likewise.
This patch adds a new build module called 'testsuite'.
IS_IN (testsuite) implies _ISOMAC, as do IS_IN_build and __cplusplus
(which means several ad-hoc tests for __cplusplus can go away).
libc-symbols.h now suppresses almost all of *itself* when _ISOMAC is
defined; in particular, _ISOMAC mode does not get config.h
automatically anymore.
There are still quite a few tests that need to see internal gunk of
one variety or another. For them, we now have 'tests-internal' and
'test-internal-extras'; files in this category will still be compiled
with MODULE_NAME=nonlib, and everything proceeds as it always has.
The bulk of this patch is moving tests from 'tests' to
'tests-internal'. There is also 'tests-static-internal', which has
the same effect on files in 'tests-static', and 'modules-names-tests',
which has the *inverse* effect on files in 'modules-names' (it's
inverted because most of the things in modules-names are *not* tests).
For both of these, the file must appear in *both* the new variable and
the old one.
There is also now a special case for when libc-symbols.h is included
without MODULE_NAME being defined at all. (This happens during the
creation of libc-modules.h, and also when preprocessing Versions
files.) When this happens, IS_IN is set to be always false and
_ISOMAC is *not* defined, which was the status quo, but now it's
explicit.
The remaining changes to C source files in this patch seemed likely to
cause problems in the absence of the main change. They should be
relatively self-explanatory. In a few cases I duplicated a definition
from an internal header rather than move the test to tests-internal;
this was a judgement call each time and I'm happy to change those
however reviewers feel is more appropriate.
* Makerules: New subdir configuration variables 'tests-internal'
and 'test-internal-extras'. Test files in these categories will
still be compiled with MODULE_NAME=nonlib. Test files in the
existing categories (tests, xtests, test-srcs, test-extras) are
now compiled with MODULE_NAME=testsuite.
New subdir configuration variable 'modules-names-tests'. Files
which are in both 'modules-names' and 'modules-names-tests' will
be compiled with MODULE_NAME=testsuite instead of
MODULE_NAME=extramodules.
(gen-as-const-headers): Move to tests-internal.
(do-tests-clean, common-mostlyclean): Support tests-internal.
* Makeconfig (built-modules): Add testsuite.
* Makefile: Change libof-check-installed-headers-c and
libof-check-installed-headers-cxx to 'testsuite'.
* Rules: Likewise. Support tests-internal.
* benchtests/strcoll-inputs/filelist#en_US.UTF-8:
Remove extra-modules.mk.
* config.h.in: Don't check for __OPTIMIZE__ or __FAST_MATH__ here.
* include/libc-symbols.h: Move definitions of _GNU_SOURCE,
PASTE_NAME, PASTE_NAME1, IN_MODULE, IS_IN, and IS_IN_LIB to the
very top of the file and rationalize their order.
If MODULE_NAME is not defined at all, define IS_IN to always be
false, and don't define _ISOMAC.
If any of IS_IN (testsuite), IS_IN_build, or __cplusplus are
true, define _ISOMAC and suppress everything else in this file,
starting with the inclusion of config.h.
Do check for inappropriate definitions of __OPTIMIZE__ and
__FAST_MATH__ here, but only if _ISOMAC is not defined.
Correct some out-of-date commentary.
* include/math.h: If _ISOMAC is defined, undefine NO_LONG_DOUBLE
and _Mlong_double_ before including math.h.
* include/string.h: If _ISOMAC is defined, don't expose
_STRING_ARCH_unaligned. Move a comment to a more appropriate
location.
* include/errno.h, include/stdio.h, include/stdlib.h, include/string.h
* include/time.h, include/unistd.h, include/wchar.h: No need to
check __cplusplus nor use __BEGIN_DECLS/__END_DECLS.
* misc/sys/cdefs.h (__NTHNL): New macro.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h
(__m81_defun): Use __NTHNL to avoid errors with GCC 6.
* elf/tst-env-setuid-tunables.c: Include config.h with _LIBC
defined, for HAVE_TUNABLES.
* inet/tst-checks-posix.c: No need to define _ISOMAC.
* intl/tst-gettext2.c: Provide own definition of N_.
* math/test-signgam-finite-c99.c: No need to define _ISOMAC.
* math/test-signgam-main.c: No need to define _ISOMAC.
* stdlib/tst-strtod.c: Convert to test-driver. Split locale_test to...
* stdlib/tst-strtod1i.c: ...this new file.
* stdlib/tst-strtod5.c: Convert to test-driver and add copyright notice.
Split tests of __strtod_internal to...
* stdlib/tst-strtod5i.c: ...this new file.
* string/test-string.h: Include stdint.h. Duplicate definition of
inhibit_loop_to_libcall here (from libc-symbols.h).
* string/test-strstr.c: Provide dummy definition of
libc_hidden_builtin_def when including strstr.c.
* sysdeps/ia64/fpu/libm-symbols.h: Suppress entire file in _ISOMAC
mode; no need to test __STRICT_ANSI__ nor __cplusplus as well.
* sysdeps/x86_64/fpu/math-tests-arch.h: Include cpu-features.h.
Don't include init-arch.h.
* sysdeps/x86_64/multiarch/test-multiarch.h: Include cpu-features.h.
Don't include init-arch.h.
* elf/Makefile: Move tst-ptrguard1-static, tst-stackguard1-static,
tst-tls1-static, tst-tls2-static, tst-tls3-static, loadtest,
unload, unload2, circleload1, neededtest, neededtest2,
neededtest3, neededtest4, tst-tls1, tst-tls2, tst-tls3,
tst-tls6, tst-tls7, tst-tls8, tst-dlmopen2, tst-ptrguard1,
tst-stackguard1, tst-_dl_addr_inside_object, and all of the
ifunc tests to tests-internal.
Don't add $(modules-names) to test-extras.
* inet/Makefile: Move tst-inet6_scopeid_pton to tests-internal.
Add tst-deadline to tests-static-internal.
* malloc/Makefile: Move tst-mallocstate and tst-scratch_buffer to
tests-internal.
* misc/Makefile: Move tst-atomic and tst-atomic-long to tests-internal.
* nptl/Makefile: Move tst-typesizes, tst-rwlock19, tst-sem11,
tst-sem12, tst-sem13, tst-barrier5, tst-signal7, tst-tls3,
tst-tls3-malloc, tst-tls5, tst-stackguard1, tst-sem11-static,
tst-sem12-static, and tst-stackguard1-static to tests-internal.
Link tests-internal with libpthread also.
Don't add $(modules-names) to test-extras.
* nss/Makefile: Move tst-field to tests-internal.
* posix/Makefile: Move bug-regex5, bug-regex20, bug-regex33,
tst-rfc3484, tst-rfc3484-2, and tst-rfc3484-3 to tests-internal.
* stdlib/Makefile: Move tst-strtod1i, tst-strtod3, tst-strtod4,
tst-strtod5i, tst-tls-atexit, and tst-tls-atexit-nodelete to
tests-internal.
* sunrpc/Makefile: Move tst-svc_register to tests-internal.
* sysdeps/powerpc/Makefile: Move test-get_hwcap and
test-get_hwcap-static to tests-internal.
* sysdeps/unix/sysv/linux/Makefile: Move tst-setgetname to
tests-internal.
* sysdeps/x86_64/fpu/Makefile: Add all libmvec test modules to
modules-names-tests.
Now with read consolidation which uses SYSCALL_CANCEL macro, a frame
pointer is created in the syscall code and this makes the powerpc
backtrace obtain a bogus entry for the signal handling patch.
It is because it does not setup the correct frame pointer register
(r1) based on the saved value from the kernel sigreturn. It was not
failing because the syscall frame pointer register was the same one
for the next frame (the function that actually called the syscall).
This patch fixes it by setup the next stack frame using the saved
one by the kernel sigreturn. It fixes tst-backtrace{5,6} from
the read consolidation patch.
Checked on powerpc-linux-gnu and powerpc64le-linux-gnu.
* sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address): Use
void* for argument type and use VDSO_SYMBOL macro.
(is_sigtramp_address_rt): Likewise.
(__backtrace): Setup expected frame pointer address for signal
handling.
* sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address): Use
void* for argumetn type and use VSDO_SYMBOL macro.
(__backtrace): Setup expected frame pointer address for signal
handling.
This patch removes all the replicated pthread definition accross the
architectures and consolidates it on shared headers. The new
organization is as follow:
* Architecture specific definition (such as pthread types sizes) are
place in the new pthreadtypes-arch.h header in arch specific path.
* All shared structure definition are moved to a common NPTL header
at sysdeps/nptl/bits/pthreadtypes.h (with now includes the arch
specific one for internal definitions).
* Also, for C11 future thread support, both mutex and condition
definition are placed in a common header at
sysdeps/nptl/bits/thread-shared-types.h.
It is also a refactor patch without expected functional changes.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu, mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).
* posix/Makefile (headers): Add pthreadtypes-arch.h and
thread-shared-types.h.
* sysdeps/aarch64/nptl/bits/pthreadtypes-arch.h: New file: arch
specific thread definition.
* sysdeps/alpha/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes-arch.h: Likewise.
* sysdeps/nptl/bits/thread-shared-types.h: New file: shared
thread definition between POSIX and C11.
* sysdeps/aarch64/nptl/bits/pthreadtypes.h.: Remove file.
* sysdeps/alpha/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/arm/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/hppa/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/m68k/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/microblaze/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/mips/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nios2/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/ia64/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/powerpc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/s390/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sh/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/sparc/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/tile/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/x86/nptl/bits/pthreadtypes.h: Likewise.
* sysdeps/nptl/bits/pthreadtypes.h: New file: common thread
definitions shared across all architectures.
1. Fix the results for negative subnormals by ignoring the signal when
normalizing the value.
2. Fix the output when the high part is a power of 2 and the low part
is a nonzero number with opposite sign. This fix is based on commit
380bd0fd24.
After applying this patch, logbl() tests pass cleanly on POWER >= 7.
Tested on powerpc, powerpc64 and powerpc64le
[BZ #21280]
* sysdeps/powerpc/power7/fpu/s_logbl.c (__logbl): Ignore the
signal of subnormals and adjust the exponent of power of 2 down
when low part has opposite sign.
float128 on powerpc64le requires the addition of the ieee754/float128
sysdep, whereas powerpc64 doesn't. This requires creating a bunch of
submachine and cpu directories and Implies files which just point
towards their powerpc64 equivalent.
Tested on P7, P8, and generic powerpc64le targets with and without
multiarch.
* sysdeps/powerpc/powerpc64le/Implies: New file.
* sysdeps/powerpc/powerpc64le/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64le/fpu/multiarch/Implies: New file.
* sysdeps/powerpc/powerpc64le/multiarch/Implies: New file.
* sysdeps/powerpc/powerpc64le/power7/Implies: New file.
* sysdeps/powerpc/powerpc64le/power7/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64le/power7/fpu/multiarch/Implies: New file.
* sysdeps/powerpc/powerpc64le/power7/multiarch/Implies: New file.
* sysdeps/powerpc/powerpc64le/power8/Implies: New file.
* sysdeps/powerpc/powerpc64le/power8/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64le/power8/fpu/multiarch/Implies: New file.
* sysdeps/powerpc/powerpc64le/power8/multiarch/Implies: New file.
* sysdeps/powerpc/powerpc64le/power9/Implies: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64le/power9/fpu/multiarch/Implies: New file.
* sysdeps/powerpc/powerpc64le/power9/multiarch/Implies: New file.
* sysdeps/powerpc/preconfigure: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64le/fpu/Implies: New file.
P7 code is used for <=32B strings and for > 32B vectorized loops are used.
This shows as an average 25% improvement depending on the position of search
character. The performance is same for shorter strings.
Tested on ppc64 and ppc64le.
With new optimized strnlen for POWER8 [1], this patch adds
strncat for power8 to make use of optimized strlen and strnlen.
This is faster than POWER7 current implementation for larger strings.
Tested on powerpc64 and powerpc64le.
[1] https://sourceware.org/ml/libc-alpha/2017-03/msg00491.html
* sysdeps/powerpc/powerpc64/multiarch/Makefile (sysdep_routines): Add
strncat-power8.
* sysdeps/powerpc/powerpc64/multiarch/strncat.c (strncat): Add
__strncat_power8 to ifunc list.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c
(strncat): Add __strncat_power8 to list of strncat functions.
* sysdeps/powerpc/powerpc64/multiarch/strncat-power8.c: New file.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/memcmp-power4.S: Define the
implementation-specific function name and remove unneeded
macros definition.
* sysdeps/powerpc/powerpc64/multiarch/memcmp-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memmove-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/power4/memcmp.S: Set a default function
name if not defined and pass as parameter to macros accordingly.
* sysdeps/powerpc/powerpc64/power7/memcmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-a2.S: Define the
implementation-specific function name and remove unneeded
macros definition.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-cell.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power4.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power6.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/mempcpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/a2/memcpy.S: Set a default function
name if not defined and pass as parameter to macros accordingly.
* sysdeps/powerpc/powerpc64/cell/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power4/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/mempcpy.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/memchr-power7.S: Define the
implementation-specific function name and remove unneeded macros
definition.
* sysdeps/powerpc/powerpc64/multiarch/memrchr-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/rawmemchr-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/memchr.S: Set a default
function name if not defined and pass as parameter to macros
accordingly.
* sysdeps/powerpc/powerpc64/power7/memrchr.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/rawmemchr.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/memset-power4.S: Define the
implementation-specific function name and remove unneeded macros
definition.
* sysdeps/powerpc/powerpc64/multiarch/memset-power6.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memset-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memset-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/memset.S: Set a default function name if
not defined and pass as parameter to macros accordingly.
* sysdeps/powerpc/powerpc64/power4/memset.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/memset.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/memset.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/memset.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/strcasestr-power8.S: Define the
strcasestr implementation name and remove unneeded macros definition.
* sysdeps/powerpc/powerpc64/multiarch/strstr-power7.S: Define
strstr implementation name and remove unneeded macros definition.
* sysdeps/powerpc/powerpc64/power7/strstr.S: Set a default function
name if not defined and pass as parameter to macros accordingly.
* sysdeps/powerpc/powerpc64/power8/strcasestr.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/strchr-power7.S: Define the
implementation-specific function name and remove unneeded macros
definition.
* sysdeps/powerpc/powerpc64/multiarch/strchr-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strchrnul-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strchrnul-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strchr.S: Set a default
function name if not defined and pass as parameter to macros
accordingly.
* sysdeps/powerpc/powerpc64/power7/strchrnul.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strrchr.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/strchr.S: Likewise.
* sysdeps/powerpc/powerpc64/strchr.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/strlen-power7.S: Define
the strlen implementation name and remove unneeded macros definition.
* sysdeps/powerpc/powerpc64/multiarch/strlen-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strnlen-power7.S: Define
the strnlen implementation name and remove unneeded macros definition.
* sysdeps/powerpc/powerpc64/power7/strlen.S: Set a default function
name if not defined and pass as parameter to macros accordingly.
* sysdeps/powerpc/powerpc64/power7/strnlen.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/strlen.S: Likewise.
* sysdeps/powerpc/powerpc64/strlen.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l-power7.S: Define
the implementation-specific function name and remove unneeded
macros definition.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power8.S Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power9.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power4.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power9.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise.
* sysdeps/powerpc/powerpc64/power4/strncmp.S: Set a default function
name if not defined and pass as parameter to macros accordingly.
* sysdeps/powerpc/powerpc64/power7/strcmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/strcmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power9/strcmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power9/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc64/strcmp.S: Likewise.
* sysdeps/powerpc/powerpc64/strncmp.S: Likewise.
Clean up the IFUNC implementations for powerpc in order to remove
unneeded macro definitions.
Tested on ppc64le with and without --disable-multi-arch flag.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-power8.S: Define the
implementation-specific function name and remove unneeded macros
definition.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power7.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncpy-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strncpy.S: Set a default
function name if not defined.
* sysdeps/powerpc/powerpc64/power8/strcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power8/strncpy.S: Likewise.
This patch moves all arch specific pthreadtypes.h to a similar path
for all architectures (sysdeps/unix/sysv/<arch>/bits). No functional
or build change is expected. The idea is mainly to organize the
header placement for all architectures.
Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu,
arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu,
m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu,
powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu,
tile{pro,gx}-linux-gnu, and x86_64-linux-gnu).
* sysdeps/unix/sysv/linux/x86/Implies: New file.
* sysdeps/unix/sysv/linux/alpha/bits/pthreadtypes.h: Move to ...
* sysdeps/alpha/nptl/bits/pthreadtypes.h: ... here.
* sysdeps/unix/sysv/linux/powerpc/bits/pthreadtypes.h: Move to ...
* sysdeps/powerpc/nptl/bits/pthreadtypes.h: ... here.
* sysdeps/x86/bits/pthreadtypes.h: Move to ...
* sysdeps/x86/nptl/bits/pthreadtypes.h: ... here.
As noted in [1], divdi3 object is only exported in a handful ABIs
(i386, m68k, powerpc32, s390-32, and ia64), however it is built
for all current architectures regardless.
This patch refact the make rules for this object to so only the
aforementioned architectures that actually require it builds it.
Also, to avoid internal PLT calls to the exported symbol from the
module, glibc uses an internal header (symbol-hacks.h) which is
unrequired (and in fact breaks the build for architectures that
intend to get symbol definitions from libgcc.a). The patch also
changes it to create its own header (divdi3-symbol-hacks.h) and
adjust the architectures that require it accordingly.
I checked the build/check (with run-built-tests=no) on the
following architectures (which I think must cover all supported
ABI/builds) using GCC 6.3:
aarch64-linux-gnu
alpha-linux-gnu
arm-linux-gnueabihf
hppa-linux-gnu
ia64-linux-gnu
m68k-linux-gnu
microblaze-linux-gnu
mips64-n32-linux-gnu
mips-linux-gnu
mips64-linux-gnu
nios2-linux-gnu
powerpc-linux-gnu
powerpc-linux-gnu-power4
powerpc64-linux-gnu
powerpc64le-linux-gnu
s390x-linux-gnu
s390-linux-gnu
sh4-linux-gnu
sh4-linux-gnu-soft
sparc64-linux-gnu
sparcv9-linux-gnu
tilegx-linux-gnu
tilegx-linux-gnu-32
tilepro-linux-gnu
x86_64-linux-gnu
x86_64-linux-gnu-x32
i686-linux-gnu
I only saw one regression on sparcv9-linux-gnu (extra PLT call to
.udiv) which I address in next patch in the set. It also correctly
build SH with GCC 7.0.1 (without any regression from c89721e25d).
[1] https://sourceware.org/ml/libc-alpha/2017-03/msg00243.html
* sysdeps/i386/symbol-hacks.h: New file.
* sysdeps/m68k/symbol-hacks.h: New file.
* sysdeps/powerpc/powerpc32/symbol-hacks.h: New file.
* sysdeps/s390/s390-32/symbol-hacks.h: New file.
* sysdeps/unix/sysv/linux/i386/Makefile
[$(subdir) = csu] (sysdep_routines): New rule: divdi3 object.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/unix/sysv/linux/m68k/Makefile
[$(subdir) = csu] (sysdep_routines): Likewise.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/Makefile
[$(subdir) = csu] (sysdep_routines): Likewise.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/Makefile
[$(subdir) = csu] (sysdep_routines): Likewise.
[$(subdir) = csu] (sysdep-only-routines): Likewise.
[$(subdir) = csu] (CFLAGS-divdi3.c): Likewise.
* sysdeps/wordsize-32/Makefile: Remove file.
* sysdeps/wordsize-32/symbol-hacks.h: Definitions move to ...
* sysdeps/wordsize-32/divdi3-symbol-hacks.h: ... here.
Added strnlen POWER8 otimized for long strings. It delivers
same performance as POWER7 implementation for short strings.
This takes advantage of reasonably performing unaligned loads
and bit permutes to check the first 1-16 bytes until
quadword aligned, then checks in 64 bytes strides until unsafe,
then 16 bytes, truncating the count if need be.
Likewise, the POWER7 code is recycled for less than 32 bytes strings.
Tested on ppc64 and ppc64le.
* sysdeps/powerpc/powerpc64/multiarch/Makefile
(sysdep_routines): Add strnlen-power8.
* sysdeps/powerpc/powerpc64/multiarch/ifunc-impl-list.c
(strnlen): Add __strnlen_power8 to list of strnlen functions.
* sysdeps/powerpc/powerpc64/multiarch/strnlen-power8.S:
New file.
* sysdeps/powerpc/powerpc64/multiarch/strnlen.c
(__strnlen): Add __strnlen_power8 to ifunc list.
* sysdeps/powerpc/powerpc64/power8/strnlen.S: New file.
These are a grab bag of changes where the testsuite was using internal
symbols of some variety, but this was straightforward to fix, and the
fixed code should work with or without the change to compile the
testsuite under _ISOMAC.
Four of these are just more #include adjustments, but I want to highlight
sysdeps/powerpc/fpu/tst-setcontext-fpscr.c, which appears to have been
written before the advent of sys/auxv.h. I think a big chunk of this file
could be replaced by a simple call to getauxval, but I'll let someone who
actually has a powerpc machine to test on do that.
dlfcn/tst-dladdr.c was including ldsodefs.h just so it could use
DL_LOOKUP_ADDRESS to print an additional diagnostic; as requested by Carlos,
I have removed this.
math/test-misc.c was using #ifndef NO_LONG_DOUBLE, which is an internal
configuration macro, to decide whether to do certain tests involving
'long double'. I changed the test to #if LDBL_MANT_DIG > DBL_MANT_DIG
instead, which uses only public float.h macros and is equivalent on
all supported platforms. (Note that NO_LONG_DOUBLE doesn't mean 'the
compiler doesn't support long double', it means 'long double is the
same as double'.)
tst-writev.c has a configuration macro 'ARTIFICIAL_LIMIT' that the
Makefiles are expected to define, and sysdeps/unix/sysv/linux/Makefile
was using the internal __getpagesize in the definition; changed to
sysconf(_SC_PAGESIZE) which is the POSIX equivalent.
ia64-linux doesn't supply 'clone', only '__clone2', which is not
defined in the public headers(!) All the other clone tests have local
extern declarations of __clone2, but tst-clone.c doesn't; it was
getting away with this because include/sched.h does declare __clone2.
* nss/tst-cancel-getpwuid_r.c: Include nss.h.
* string/strcasestr.c: No need to include config.h.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: Include
sys/auxv.h. Don't include sysdep.h.
* sysdeps/powerpc/tst-set_ppr.c: Don't include dl-procinfo.h.
* dlfcn/tst-dladdr.c: Don't include ldsodefs.h. Don't use
DL_LOOKUP_ADDRESS.
* math/test-misc.c: Instead of testing NO_LONG_DOUBLE, test whether
LDBL_MANT_DIG is greater than DBL_MANT_DIG.
* sysdeps/unix/sysv/linux/Makefile (CFLAGS-tst-writev.c): Use
sysconf (_SC_PAGESIZE) instead of __getpagesize in definition
of ARTIFICIAL_LIMIT.
* sysdeps/unix/sysv/linux/tst-clone.c [__ia64__]: Add extern
declaration of __clone2.
A few 'long double'-related tests include math_private.h just for
their variety of math_ldbl.h, which contains macros for assembling and
disassembling the binary representation of 'long double'. math_ldbl.h
insists on being included from math_private.h, but if we relax this
restriction (and fix some portability sloppiness) we can use it
directly and not have to expose all of math_private.h to the testsuite.
* sysdeps/generic/math_private.h: Use __BIG_ENDIAN and
__LITTLE_ENDIAN, not BIG_ENDIAN and LITTLE_ENDIAN.
* sysdeps/generic/math_ldbl.h
* sysdeps/ia64/fpu/math_ldbl.h
* sysdeps/ieee754/ldbl-128/math_ldbl.h
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h
* sysdeps/ieee754/ldbl-96/math_ldbl.h
* sysdeps/powerpc/fpu/math_ldbl.h
* sysdeps/x86_64/fpu/math_ldbl.h:
Allow direct inclusion. Use uintNN_t instead of u_intNN_t.
Use __BIG_ENDIAN and __LITTLE_ENDIAN, not BIG_ENDIAN and
LITTLE_ENDIAN. Include endian.h and/or stdint.h if necessary.
Add copyright notices.
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h (ldbl_canonicalize_int):
Don't use EXTRACT_WORDS64.
* sysdeps/ieee754/ldbl-96/test-canonical-ldbl-96.c
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c
* sysdeps/ieee754/ldbl-128ibm/test-canonical-ldbl-128ibm.c
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c:
Include math_ldbl.h, not math_private.h.
The sys/platform/ppc.h header defines a class of __ppc_set_ppr functions
used to set the Program Priority Register (PPR) in PowerPC.
This patch implements test cases for these functions.
Tested on ppc64le, ppc64, and ppc.
* sysdeps/powerpc/tst-set_ppr.c: New file.
Implement test cases for __ppc_set_ppr_* functions.
* sysdeps/powerpc/Makefile ($(subdir),misc): Add tst-set_ppr
in the list of tests.
Change the powerpc tests to use <support/test-driver.c>.
Also replace some of pthread calls to its xpthread equivalent.
Tested on ppc64le.
* sysdeps/powerpc/test-get_hwcap.c: Use <support/test-driver.c>
instead of test-skeleton.c.
(do_test): Replaced pthread_create and pthread_join with
xpthread_create and xpthread_join. Use TEST_VERIFY_EXIT macro.
Removed unneeded status variable.
* sysdeps/powerpc/test-gettimebase.c: Use <support/test-driver.c>
instead of test-skeleton.c.
* sysdeps/powerpc/tst-tlsopt-powerpc.c: Likewise.
For strings >16B and <32B existing algorithm takes more time than default
implementation when strings are placed closed to end of page. This is due
to byte by byte access for handling page cross. This is improved by
following >32B code path where the address is adjusted to aligned memory
before doing load doubleword operation instead of loading bytes.
Tested on powerpc64 and powerpc64le.
Based on comments on previous attempt to address BZ#16640 [1],
the idea is not support invalid use of strtok (the original
bug report proposal). This leader to a new strtok optimized
strtok implementation [2].
The idea of this patch is to fix BZ#16640 to align all the
implementations to a same contract. However, with newer strtok
code it is better to get remove the old assembly ones instead of
fix them.
For x86 is a gain in all cases since the new implementation can
potentially use sse2/sse42 implementation for strspn and strcspn.
This shows a better performance on both i686 and x86_64 using
the string benchtests.
On powerpc64 the gains are mixed, where only for larger inputs
or keys some gains are showns (based on benchtest it seems that
it shows some gains for keys larger than 10 and inputs larger
than 32). I would prefer to remove the optimized implementation
based on first code simplicity and second because some more gain
could be optimized using a better optimized strcspn/strspn
code (as for x86). However if powerpc arch maintainers prefer I
can send a v2 with the assembly code adjusted instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, and powerpc64le-linux-gnu.
[BZ #16640]
* sysdeps/i386/i686/strtok.S: Remove file.
* sysdeps/i386/i686/strtok_r.S: Likewise.
* sysdeps/i386/strtok.S: Likewise.
* sysdeps/i386/strtok_r.S: Likewise.
* sysdeps/powerpc/powerpc64/strtok.S: Likewise.
* sysdeps/powerpc/powerpc64/strtok_r.S: Likewise.
* sysdeps/x86_64/strtok.S: Likewise.
* sysdeps/x86_64/strtok_r.S: Likewise.
[1] https://sourceware.org/ml/libc-alpha/2016-10/msg00411.html
[2] https://sourceware.org/ml/libc-alpha/2016-12/msg00461.html
After this update, math/test-ildouble, math/test-ldouble and
math/test-ldouble-finite pass on hard float, POWER < 7 builds.
Tested on powerpc, powerpc64 and powerpc64le.
This commit moves one step towards the deprecation of wrappers that
use _LIB_VERSION / matherr / __kernel_standard functionality, by
adding the suffix '_compat' to their filenames and adjusting Makefiles
and #includes accordingly.
New template wrappers that do not use such functionality will be added
by future patches and will be first used by the float128 wrappers.
Since commit 6e46de42fe default strcat implementation is essentially
the same for specialized ia64 and powerpc ones. This patch removes the
redundant implementation and adjust powerpc64 ifunc code to use the
default one.
Checked on powerpc32-linux-gnu (default and power4) and ia64-linux build
and on powerpc64le-linux-gnu.
* sysdeps/ia64/strcat.c: Remove file.
* sysdeps/powerpc/strcat.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcat-power7.c: Use default
C implementation.
* sysdeps/powerpc/powerpc64/multiarch/strcat-power8.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcat-ppc64.c: Likewise.
The same error fixed in commit b224637928
happens in the 32-bit implementation of memchr for power7.
This patch adopts the same solution, with a minimal change: it
implements a saturated addition where overflows sets the maximum pointer
size to UINTPTR_MAX.
The P7 code is used for <=32B strings and for > 32B vectorized loops are used.
This shows as an average 25% improvement depending on the position of search
character. The performance is same for shorter strings.
Tested on ppc64 and ppc64le.
When dynamically linking, ifunc resolvers are called before TLS is
initialized, so they cannot be safely stack-protected.
We avoid disabling stack-protection on large numbers of files by
using __attribute__ ((__optimize__ ("-fno-stack-protector")))
to turn it off just for the resolvers themselves. (We provide
the attribute even when statically linking, because we will later
use it elsewhere too.)
Current optimized powercp64/power7 memchr uses a strategy to check for
p versus align(p+n) (where 'p' is the input char pointer and n the
maximum size to check for the byte) without taking care for possible
overflow on the pointer addition in case of large 'n'.
It was triggered by 3038145ca2 where default rawmemchr (used to
created ppc64 rawmemchr in ifunc selection) now uses memchr (p, c, (size_t)-1)
on its implementation.
This patch fixes it by implement a satured addition where overflows
sets the maximum pointer size to UINTPTR_MAX.
Checked on powerpc64le-linux-gnu.
[BZ# 20971]
* sysdeps/powerpc/powerpc64/power7/memchr.S (__memchr): Avoid
overflow in pointer addition.
* string/test-memchr.c (do_test): Add an argument to pass as
the size on memchr.
(test_main): Add check for SIZE_MAX.
Various fmax and fmin function implementations mishandle sNaN
arguments:
(a) When both arguments are NaNs, the return value should be a qNaN,
but sometimes it is an sNaN if at least one argument is an sNaN.
(b) Under TS 18661-1 semantics, if either argument is an sNaN then the
result should be a qNaN (whereas if one argument is a qNaN and the
other is not a NaN, the result should be the non-NaN argument).
Various implementations treat sNaNs like qNaNs here.
This patch fixes the powerpc versions of these functions (shared by
float and double, 32-bit and 64-bit). The structure of those versions
is that all ordered cases are already handled before anything dealing
with the case where the arguments are unordered; thus, this patch
causes no change to the code executed in the common case (neither
argument a NaN).
Tested for powerpc (32-bit and 64-bit), together with tests to be
added along with the x86_64 / x86 fixes.
[BZ #20947]
* sysdeps/powerpc/fpu/s_fmax.S (__fmax): Add the arguments when
either is a signaling NaN.
* sysdeps/powerpc/fpu/s_fmin.S (__fmin): Likewise.
Information about whether the ABI of long double is the same as that
of double is split between bits/mathdef.h and bits/wordsize.h.
When the ABIs are the same, bits/mathdef.h defines
__NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc
binary supports both -mlong-double-64 and -mlong-double-128,
bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with
__NO_LONG_DOUBLE_MATH if this particular compilation is with
-mlong-double-64.
As part of the refactoring I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this
patch puts all that information in a single header,
bits/long-double.h. It is included from sys/cdefs.h alongside the
include of bits/wordsize.h, so other headers generally do not need to
include bits/long-double.h directly.
Previously, various bits/mathdef.h headers and bits/wordsize.h headers
had this long double information (including implicitly in some
bits/mathdef.h headers through not having the defines present in the
default version). After the patch, it's all in six bits/long-double.h
headers. Furthermore, most of those new headers are not
architecture-specific. Architectures with optional long double all
use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128,
ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header
for the case where long double = double, and headers in ldbl-128,
ldbl-96 and ldbl-opt, suffices to cover every architecture except for
cases where long double properties vary between different ABIs sharing
a set of installed headers; fortunately all the ldbl-opt cases share a
single compiler-predefined macro __LONG_DOUBLE_128__ that can be used
to tell whether this compilation is -mlong-double-64 or
-mlong-double-128.
The two cases where a set of headers is shared between ABIs with
different long double properties, MIPS (o32 has long double = double,
other ABIs use ldbl-128) and SPARC (32-bit has optional long double,
64-bit has required long double), need their own bits/long-double.h
headers.
As with bits/wordsize.h, multiple-include protection for this header
is generally implicit through the include guards on sys/cdefs.h, and
multiple inclusion is harmless in any case. There is one subtlety:
the header must not define __LONG_DOUBLE_MATH_OPTIONAL if
__NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing
so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines
__NO_LONG_DOUBLE_MATH itself before including system headers. Subject
to keeping that working, it would be reasonable to move these macros
from defined/undefined #ifdef to always-defined 1/0 #if semantics, but
this patch does not attempt to do so, just rearranges where the macros
are defined.
After this patch, the only use of bits/mathdef.h is the alpha one for
modifying complex function ABIs for old GCC. Thus, all versions of
the header other than the default and alpha versions are removed, as
is the include from math.h.
Tested for x86_64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/long-double.h: New file.
* sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise.
* sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise.
* sysdeps/mips/bits/long-double.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise.
* math/Makefile (headers): Add bits/long-double.h.
* misc/sys/cdefs.h: Include <bits/long-double.h>.
* stdlib/strtold.c: Include <bits/long-double.h> instead of
<bits/wordsize.h>.
* bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion.
[!__NO_LONG_DOUBLE_MATH]: Remove conditional code.
* math/math.h: Do not include <bits/mathdef.h>.
* sysdeps/aarch64/bits/mathdef.h: Remove file.
* sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow
inclusion.
* sysdeps/ia64/bits/mathdef.h: Remove file.
* sysdeps/m68k/m680x0/bits/mathdef.h: Likewise.
* sysdeps/mips/bits/mathdef.h: Likewise.
* sysdeps/powerpc/bits/mathdef.h: Likewise.
* sysdeps/s390/bits/mathdef.h: Likewise.
* sysdeps/sparc/bits/mathdef.h: Likewise.
* sysdeps/x86/bits/mathdef.h: Likewise.
* sysdeps/s390/s390-32/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove
conditional code.
* sysdeps/s390/s390-64/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/wordsize.h
[!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]:
Likewise.
TS 18661-1 generally defines libm functions taking sNaN arguments to
return qNaN and raise "invalid", even for the cases where a
corresponding qNaN argument would not result in a qNaN return. This
includes hypot with one argument being an infinity and the other being
an sNaN. This patch duly fixes hypot implementatations in glibc
(generic and powerpc) to ensure qNaN, computed by arithmetic on the
arguments, is returned in that case.
Various implementations do their checks for infinities and NaNs inline
by manipulating the representations of the arguments. For simplicity,
this patch just uses issignaling to check for sNaN arguments. This
could be inlined like the existing code (with due care about reversed
quiet NaN conventions, for implementations where that is relevant),
but given that all these checks are in cases where it's already known
at least one argument is not finite, which should be the uncommon
case, that doesn't seem worthwhile unless performance issues are
observed in practice.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #20940]
* sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Do not
return Inf for arguments Inf and sNaN.
* sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise.
* sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl):
Likewise.
* sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise.
* sysdeps/powerpc/fpu/e_hypot.c (TEST_INF_NAN): Do not return Inf
for arguments Inf and sNaN. When returning a NaN, compute it by
arithmetic on the arguments.
* sysdeps/powerpc/fpu/e_hypotf.c (TEST_INF_NAN): Likewise.
* math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
Commit c7debbdfac redirected the internal strrch to default powerpc64
implementation by redefining the weak_alias at
sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.c:
#undef weak_alias
#define weak_alias(name, aliasname) \
extern __typeof (__strrchr_ppc) aliasname \
__attribute__ ((weak, alias ("__strrchr_ppc")));
This creates a __GI_strchr alias that clashes with the IFUNC symbol in
stprchr.os. There is not need to define the default version for internal
version, since ifunc should work internally for powerpc64. This patch
removes the weak_alias indirection.
Checked on powerpc64le.
* sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c (weak_alias):
Remove redirection to __strrchr_ppc.
Continuing the refactoring of bits/mathdef.h, this patch stops it
defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to
a new header bits/fp-logb.h.
There are only two possible values of each of those macros permitted
by ISO C. TS 18661-1 adds corresponding macros for llogb, and their
values are required to correspond to those of the ilogb macros in the
obvious way. Thus two boolean values - for which the same choices are
correct for most architectures - suffice to determine the value of all
these macros, and by defining macros for those boolean values in
bits/fp-logb.h we can then define the public FP_* macros in math.h and
avoid the present duplication of the associated feature test macro
logic.
This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and
__FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct
for both architectures, while ia64, m68k and x86 get their own
versions of bits/fp-logb.h to reflect their use of values different
from the defaults.
The patch renders many copies of bits/mathdef.h trivial (needed only
to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise
<https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html>
accordingly so that it removes all bits/mathdef.h headers except the
default one and the alpha one, and arranges for the header to be
included only by complex.h as the only remaining use at that point
will be for the alpha ABI issues there.
Tested for x86_64 and x86. Also did compile-only testing with
build-many-glibcs.py (using glibc sources from before the commit that
introduced many build failures with undefined __GI___sigsetjmp).
* bits/fp-logb.h: New file.
* sysdeps/ia64/bits/fp-logb.h: Likewise.
* sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise.
* sysdeps/x86/bits/fp-logb.h: Likewise.
* math/Makefile (headers): Add bits/fp-logb.h.
* math/math.h: Include <bits/fp-logb.h>.
[__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN.
[__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN.
* bits/mathdef.h (FP_ILOGB0): Remove.
(FP_ILOGBNAN): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise.
(FP_ILOGBNAN): Likewise.
Commit 142e0a9953 redirected the internal stpcpy to default powerpc64
implementation by redefining the weak_alias at
sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c:
#undef weak_alias
#define weak_alias(name, aliasname) \
extern __typeof (__stpcpy_ppc) aliasname \
__attribute__ ((weak, alias ("__stpcpy_ppc")));
This creates a __GI_stpcpy alias that clashes with the IFUNC symbol in
stpcpy.os. There is not need to define the default version for internal
version, since ifunc should work internally for powerpc64. This patch
removes the weak_alias indirection.
Checked on powerpc64le.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c (weak_alias):
Remove redirection to __stpcpy_ppc.
The __longjmp symbol was left in accidentally. It is not exported
through a Versions file, but through a .symver assembler directive.
The corresponding exported symbol was removed from the non-fpu
powerpc64 targets in commit 9b9ef82358.
Continuing the refactoring of bits/mathdef.h, this patch moves the
FP_FAST_* definitions into a new bits/fp-fast.h header. Currently
this is only for FP_FAST_FMA*, but in future it would be the
appropriate place for the FP_FAST_* macros from TS 18661-1 as well.
The generic bits/mathdef.h header defines these macros based on
whether the compiler defines __FP_FAST_*. Most architecture-specific
headers, however, fail to do so, meaning that if the architecture (or
some particular processors) does in fact have fused operations, and
GCC knows to use them inline, the FP_FAST_* macros will still not be
defined.
By refactoring, this patch causes the generic version (based on
__FP_FAST_*) to be used in more cases, and so the macro definitions to
be more accurate. Architectures that already defined some or all of
these macros other than based on the predefines have their own
versions of fp-fast.h, which are arranged so they define FP_FAST_* if
either the architecture-specific conditions are true or __FP_FAST_*
are defined.
After this refactoring, various bits/mathdef.h headers for
architectures with long double = double are semantically identical to
the generic version. The patch removes those headers that are
redundant. (In fact two of the four removed were already redundant
before this patch because they did use __FP_FAST_*.)
Tested for x86_64 and x86, and compilation-only with
build-many-glibcs.py.
* bits/fp-fast.h: New file.
* sysdeps/aarch64/bits/fp-fast.h: Likewise.
* sysdeps/powerpc/bits/fp-fast.h: Likewise.
* math/Makefile (headers): Add bits/fp-fast.h.
* math/math.h: Include <bits/fp-fast.h>.
* bits/mathdef.h (FP_FAST_FMA): Remove.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
* sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise.
(FP_FAST_FMAF): Likewise.
(FP_FAST_FMAL): Likewise.
* sysdeps/arm/bits/mathdef.h: Remove file.
* sysdeps/hppa/fpu/bits/mathdef.h: Likewise.
* sysdeps/sh/sh4/bits/mathdef.h: Likewise.
* sysdeps/tile/bits/mathdef.h: Likewise.
This patch remove the PID cache and usage in current GLIBC code. Current
usage is mainly used a performance optimization to avoid the syscall,
however it adds some issues:
- The exposed clone syscall will try to set pid/tid to make the new
thread somewhat compatible with current GLIBC assumptions. This cause
a set of issue with new workloads and usecases (such as BZ#17214 and
[1]) as well for new internal usage of clone to optimize other algorithms
(such as clone plus CLONE_VM for posix_spawn, BZ#19957).
- The caching complexity also added some bugs in the past [2] [3] and
requires more effort of each port to handle such requirements (for
both clone and vfork implementation).
- Caching performance gain in mainly on getpid and some specific
code paths. The getpid performance leverage is questionable [4],
either by the idea of getpid being a hotspot as for the getpid
implementation itself (if it is indeed a justifiable hotspot a
vDSO symbol could let to a much more simpler solution).
Other usage is mainly for non usual code paths, such as pthread
cancellation signal and handling.
For thread creation (on stack allocation) the code simplification in fact
adds some performance gain due the no need of transverse the stack cache
and invalidate each element pid.
Other thread usages will require a direct getpid syscall, such as
cancellation/setxid signal, thread cancellation, thread fail path (at
create_thread), and thread signal (pthread_kill and pthread_sigqueue).
However these are hardly usual hotspots and I think adding a syscall is
justifiable.
It also simplifies both the clone and vfork arch-specific implementation.
And by review each fork implementation there are some discrepancies that
this patch also solves:
- microblaze clone/vfork does not set/reset the pid/tid field
- hppa uses the default vfork implementation that fallback to fork.
Since vfork is deprecated I do not think we should bother with it.
The patch also removes the TID caching in clone. My understanding for
such semantic is try provide some pthread usage after a user program
issue clone directly (as done by thread creation with CLONE_PARENT_SETTID
and pthread tid member). However, as stated before in multiple discussions
threads, GLIBC provides clone syscalls without further supporting all this
semantics.
I ran a full make check on x86_64, x32, i686, armhf, aarch64, and powerpc64le.
For sparc32, sparc64, and mips I ran the basic fork and vfork tests from
posix/ folder (on a qemu system). So it would require further testing
on alpha, hppa, ia64, m68k, nios2, s390, sh, and tile (I excluded microblaze
because it is already implementing the patch semantic regarding clone/vfork).
[1] https://codereview.chromium.org/800183004/
[2] https://sourceware.org/ml/libc-alpha/2006-07/msg00123.html
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=15368
[4] http://yarchive.net/comp/linux/getpid_caching.html
* sysdeps/nptl/fork.c (__libc_fork): Remove pid cache setting.
* nptl/allocatestack.c (allocate_stack): Likewise.
(__reclaim_stacks): Likewise.
(setxid_signal_thread): Obtain pid through syscall.
* nptl/nptl-init.c (sigcancel_handler): Likewise.
(sighandle_setxid): Likewise.
* nptl/pthread_cancel.c (pthread_cancel): Likewise.
* sysdeps/unix/sysv/linux/pthread_kill.c (__pthread_kill): Likewise.
* sysdeps/unix/sysv/linux/pthread_sigqueue.c (pthread_sigqueue):
Likewise.
* sysdeps/unix/sysv/linux/createthread.c (create_thread): Likewise.
* sysdeps/unix/sysv/linux/getpid.c: Remove file.
* nptl/descr.h (struct pthread): Change comment about pid value.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Remove thread
pid assert.
* sysdeps/unix/sysv/linux/pthread-pids.h (__pthread_initialize_pids):
Do not set pid value.
* nptl_db/td_ta_thr_iter.c (iterate_thread_list): Remove thread
pid cache check.
* nptl_db/td_thr_validate.c (td_thr_validate): Likewise.
* sysdeps/aarch64/nptl/tcb-offsets.sym: Remove pid offset.
* sysdeps/alpha/nptl/tcb-offsets.sym: Likewise.
* sysdeps/arm/nptl/tcb-offsets.sym: Likewise.
* sysdeps/hppa/nptl/tcb-offsets.sym: Likewise.
* sysdeps/i386/nptl/tcb-offsets.sym: Likewise.
* sysdeps/ia64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/m68k/nptl/tcb-offsets.sym: Likewise.
* sysdeps/microblaze/nptl/tcb-offsets.sym: Likewise.
* sysdeps/mips/nptl/tcb-offsets.sym: Likewise.
* sysdeps/nios2/nptl/tcb-offsets.sym: Likewise.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/s390/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sh/nptl/tcb-offsets.sym: Likewise.
* sysdeps/sparc/nptl/tcb-offsets.sym: Likewise.
* sysdeps/tile/nptl/tcb-offsets.sym: Likewise.
* sysdeps/x86_64/nptl/tcb-offsets.sym: Likewise.
* sysdeps/unix/sysv/linux/aarch64/clone.S: Remove pid and tid caching.
* sysdeps/unix/sysv/linux/alpha/clone.S: Likewise.
* sysdeps/unix/sysv/linux/arm/clone.S: Likewise.
* sysdeps/unix/sysv/linux/hppa/clone.S: Likewise.
* sysdeps/unix/sysv/linux/i386/clone.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/clone2.S: Likewise.
* sysdeps/unix/sysv/linux/mips/clone.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sh/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/clone.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/tile/clone.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise.
* sysdeps/unix/sysv/linux/aarch64/vfork.S: Remove pid set and reset.
* sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/arm/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/i386/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/ia64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/clone.S: Likewise.
* sysdeps/unix/sysv/linux/m68k/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/mips/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/nios2/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sh/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tile/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/x86_64/vfork.S: Likewise.
* sysdeps/unix/sysv/linux/tst-clone2.c (f): Remove direct pthread
struct access.
(clone_test): Remove function.
(do_test): Rewrite to take in consideration pid is not cached anymore.
At present, definitions of float_t and double_t are split among many
bits/mathdef.h headers.
For all but three architectures, these types are float and double.
Furthermore, if you assume __FLT_EVAL_METHOD__ to be defined, that
provides a more generic way of determining the correct values of these
typedefs. Defining these typedefs more generally based on
__FLT_EVAL_METHOD__ was previously proposed by Paul Eggert in
<https://sourceware.org/ml/libc-alpha/2012-02/msg00002.html>.
This patch refactors things in the way I proposed in
<https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>. A new
header bits/flt-eval-method.h defines a single macro,
__GLIBC_FLT_EVAL_METHOD, which is then used by math.h to define
float_t and double_t. The default is based on __FLT_EVAL_METHOD__
(although actually a default to 0 would have the same effect for
current ports, because ports where values other than 0 or 16 are
possible all have their own headers).
To avoid changing the existing semantics in any case, including for
compilers not defining __FLT_EVAL_METHOD__, architecture-specific
files are then added for m68k, s390, x86 which replicate the existing
semantics. At least with __FLT_EVAL_METHOD__ values possible with
GCC, there should be no change to the choices of float_t and double_t
for any supported configuration.
Architecture maintainer notes:
* m68k: sysdeps/m68k/m680x0/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 2 to replicate the existing logic. But
actually GCC defines __FLT_EVAL_METHOD__ to 0 if TARGET_68040. It
might make sense to make the header prefer to base things on
__FLT_EVAL_METHOD__ if defined, like the x86 version, and so make
the choices of these types more accurate (with a NEWS entry as for
the other changes to these types on particular architectures).
* s390: sysdeps/s390/bits/flt-eval-method.h always defines
__GLIBC_FLT_EVAL_METHOD to 1 to replicate the existing logic. As
previously discussed, it might make sense in coordination with GCC
to eliminate the historic mistake, avoid excess precision in the
-fexcess-precision=standard case and make the typedefs match (with a
NEWS entry, again).
Tested for x86-64 and x86. Also did compilation-only testing with
build-many-glibcs.py.
* bits/flt-eval-method.h: New file.
* sysdeps/m68k/m680x0/bits/flt-eval-method.h: Likewise.
* sysdeps/s390/bits/flt-eval-method.h: Likewise.
* sysdeps/x86/bits/flt-eval-method.h: Likewise.
* math/Makefile (headers): Add bits/flt-eval-method.h.
* math/math.h: Include <bits/flt-eval-method.h>.
[__USE_ISOC99] (float_t): Define based on __GLIBC_FLT_EVAL_METHOD.
[__USE_ISOC99] (double_t): Likewise.
* bits/mathdef.h (float_t): Remove.
(double_t): Likewise.
* sysdeps/aarch64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/alpha/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/arm/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/hppa/fpu/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/ia64/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/m68k/m680x0/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/mips/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/powerpc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/s390/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sh/sh4/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/sparc/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/tile/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
* sysdeps/x86/bits/mathdef.h (float_t): Likewise.
(double_t): Likewise.
manual/libm-err-tab.pl hardcodes a list of names for particular
platforms (mapping from sysdeps directory name to friendly name for
the manual). This goes against the principle of keeping information
about individual platforms in their corresponding sysdeps directory,
and the list is also very out-of-date regarding supported platforms
and their corresponding sysdeps directories.
This patch fixes this by adding a libm-test-ulps-name file alongside
each libm-test-ulps file. The script then gets the friendly name from
that file, which is required to exist, so it no longer needs to allow
for the mapping being missing.
Tested for x86_64.
[BZ #14139]
* manual/libm-err-tab.pl (%pplatforms): Initialize to empty.
(find_files): Obtain platform name from libm-test-ulps-name and
store in %pplatforms.
(canonicalize_platform): Remove.
(print_platforms): Use $pplatforms directly.
(by_platforms): Do not allow for platforms missing from
%pplatforms.
* sysdeps/aarch64/libm-test-ulps-name: New file.
* sysdeps/alpha/fpu/libm-test-ulps-name: Likewise.
* sysdeps/arm/libm-test-ulps-name: Likewise.
* sysdeps/generic/libm-test-ulps-name: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/fpu/libm-test-ulps-name: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps-name: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps-name: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps-name: Likewise.
* sysdeps/microblaze/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips32/libm-test-ulps-name: Likewise.
* sysdeps/mips/mips64/libm-test-ulps-name: Likewise.
* sysdeps/nios2/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps-name: Likewise.
* sysdeps/s390/fpu/libm-test-ulps-name: Likewise.
* sysdeps/sh/libm-test-ulps-name: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps-name: Likewise.
* sysdeps/tile/libm-test-ulps-name: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps-name: Likewise.
Building glibc for powerpc64 with recent (2.27.51.20161012) binutils,
with multi-arch enabled, I get the error:
../sysdeps/powerpc/powerpc64/power6/memset.S: Assembler messages:
../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (5 is not between 0 and 1)
../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: operand out of range (128 is not between 0 and 31)
../sysdeps/powerpc/powerpc64/power6/memset.S:254: Error: missing operand
Indeed, cmpli is documented as a four-operand instruction, and looking
at nearby code it seems likely cmpldi was intended. This patch fixes
this powerpc64 code accordingly, and makes a corresponding change to
the powerpc32 code.
Tested for powerpc, powerpc64 and powerpc64le by Tulio Magno Quites
Machado Filho
* sysdeps/powerpc/powerpc32/power6/memset.S (memset): Use cmplwi
instead of cmpli.
* sysdeps/powerpc/powerpc64/power6/memset.S (memset): Use cmpldi
instead of cmpli.
Some of the masks are wrong, and the naming is confusing.
There are two basic cases we really care about:
1. Stacking a new rounding mode when running certain
sections of code, and pausing exception handling.
2. Likewise, but discarding any exceptions which occur
while running under the new rounding mode.
libc_feholdexcept_setround_ppc_ctx has been removed as it basically
does the same thing as libc_feholdsetround_ppc_ctx but also clearing
any sticky bits. The restore behavior is what differentiates these
two cases as the SET_RESTORE_ROUND{,_NOEX} macros will either merge
or discard all exceptions occurring during scope of their usage.
Likewise, there are a number of routines to swap, replace,
or merge FP environments. This change reduces much of
the common and sometimes wrong code.
Tested on ppc64le, with results before and after.
The powerpc (hard-float) implementations of copysignl, both 32-bit and
64-bit, raise spurious "invalid" exceptions when the first argument is
a signaling NaN. copysign functions should never raise exceptions
even for signaling NaNs.
The problem is the use of an fcmpu instruction to test the sign of the
high part of the long double argument. This patch fixes the functions
to use fsel instead (as used for fabsl following my fixes for a
similar bug there), or to examine the integer representation for older
32-bit processors without fsel.
Tested for powerpc64 and powerpc32 (configurations with and without
fsel used).
[BZ #20718]
* sysdeps/powerpc/powerpc32/fpu/s_copysignl.S (__copysignl): Do
not use floating-point comparisons to test sign.
* sysdeps/powerpc/powerpc64/fpu/s_copysignl.S (__copysignl):
Likewise.
The current s390 ifunc resolver for vector optimized functions and the common
libc_ifunc macro in include/libc-symbols.h uses something like that to generate ifunc'ed functions:
extern void *__resolve___strlen(unsigned long int dl_hwcap) asm (strlen);
asm (".type strlen, %gnu_indirect_function");
This leads to false debug information:
objdump --dwarf=info libc.so:
...
<1><1e6424>: Abbrev Number: 43 (DW_TAG_subprogram)
<1e6425> DW_AT_external : 1
<1e6425> DW_AT_name : (indirect string, offset: 0x1146e): __resolve___strlen
<1e6429> DW_AT_decl_file : 1
<1e642a> DW_AT_decl_line : 23
<1e642b> DW_AT_linkage_name: (indirect string, offset: 0x1147a): strlen
<1e642f> DW_AT_prototyped : 1
<1e642f> DW_AT_type : <0x1e4ccd>
<1e6433> DW_AT_low_pc : 0x998e0
<1e643b> DW_AT_high_pc : 0x16
<1e6443> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<1e6445> DW_AT_GNU_all_call_sites: 1
<1e6445> DW_AT_sibling : <0x1e6459>
<2><1e6449>: Abbrev Number: 44 (DW_TAG_formal_parameter)
<1e644a> DW_AT_name : (indirect string, offset: 0x1845): dl_hwcap
<1e644e> DW_AT_decl_file : 1
<1e644f> DW_AT_decl_line : 23
<1e6450> DW_AT_type : <0x1e4c8d>
<1e6454> DW_AT_location : 0x122115 (location list)
...
The debuginfo for the ifunc-resolver function contains the DW_AT_linkage_name
field, which names the real function name "strlen". If you perform an inferior
function call to strlen in lldb, then it fails due to something like that:
"error: no matching function for call to 'strlen'
candidate function not viable: no known conversion from 'const char [6]'
to 'unsigned long' for 1st argument"
The unsigned long is the dl_hwcap argument of the resolver function.
The strlen function itself has no debufinfo.
The s390 ifunc resolver for memset & co uses something like that:
asm (".globl FUNC"
".type FUNC, @gnu_indirect_function"
".set FUNC, __resolve_FUNC");
This way the debuginfo for the ifunc-resolver function does not conain the
DW_AT_linkage_name field and the real function has no debuginfo, too.
Using this strategy for the vector optimized functions leads to some troubles
for functions like strnlen. Here we have __strnlen and a weak alias strnlen.
The __strnlen function is the ifunc function, which is realized with the asm-
statement above. The weak_alias-macro can't be used here due to undefined symbol:
gcc ../sysdeps/s390/multiarch/strnlen.c -c ...
In file included from <command-line>:0:0:
../sysdeps/s390/multiarch/strnlen.c:28:24: error: ‘strnlen’ aliased to undefined symbol ‘__strnlen’
weak_alias (__strnlen, strnlen)
^
./../include/libc-symbols.h:111:26: note: in definition of macro ‘_weak_alias’
extern __typeof (name) aliasname __attribute__ ((weak, alias (#name)));
^
../sysdeps/s390/multiarch/strnlen.c:28:1: note: in expansion of macro ‘weak_alias’
weak_alias (__strnlen, strnlen)
^
make[2]: *** [build/string/strnlen.o] Error 1
As the __strnlen function is defined with asm-statements the function name
__strnlen isn't known by gcc. But the weak alias can also be done with an
asm statement to resolve this issue:
__asm__ (".weak strnlen\n\t"
".set strnlen,__strnlen\n");
In order to use the weak_alias macro, gcc needs to know the ifunc function. The
minimum gcc to build glibc is currently 4.7, which supports attribute((ifunc)).
See https://gcc.gnu.org/onlinedocs/gcc-4.7.0/gcc/Function-Attributes.html.
It is only supported if gcc is configured with --enable-gnu-indirect-function
or gcc supports it by default for at least intel and s390x architecture.
This patch uses the old behaviour if gcc support is not available.
Usage of attribute ifunc is something like that:
__typeof (FUNC) FUNC __attribute__ ((ifunc ("__resolve_FUNC")));
Then gcc produces the same .globl, .type, .set assembler instructions like above.
And the debuginfo does not contain the DW_AT_linkage_name field and there is no
debuginfo for the real function, too.
But in order to get it work, there is also some extra work to do.
Currently, the glibc internal symbol on s390x e.g. __GI___strnlen is not the
ifunc symbol, but the fallback __strnlen_c symbol. Thus I have to omit the
libc_hidden_def macro in strnlen.c (here is the ifunc function __strnlen)
because it is already handled in strnlen-c.c (here is __strnlen_c).
Due to libc_hidden_proto (__strnlen) in string.h, compiling fails:
gcc ../sysdeps/s390/multiarch/strnlen.c -c ...
In file included from <command-line>:0:0:
../sysdeps/s390/multiarch/strnlen.c:53:24: error: ‘strnlen’ aliased to undefined symbol ‘__strnlen’
weak_alias (__strnlen, strnlen)
^
./../include/libc-symbols.h:111:26: note: in definition of macro ‘_weak_alias’
extern __typeof (name) aliasname __attribute__ ((weak, alias (#name)));
^
../sysdeps/s390/multiarch/strnlen.c:53:1: note: in expansion of macro ‘weak_alias’
weak_alias (__strnlen, strnlen)
^
make[2]: *** [build/string/strnlen.os] Error 1
I have to redirect the prototypes for __strnlen in string.h and create a copy
of the prototype for using as ifunc function:
__typeof (__redirect___strnlen) __strnlen __attribute__ ((ifunc ("__resolve_strnlen")));
weak_alias (__strnlen, strnlen)
This way there is no trouble with the internal __GI_* symbols.
Glibc builds fine with this construct and the debuginfo is "correct".
For functions without a __GI_* symbol like memccpy this redirection is not needed.
This patch adjusts the common libc_ifunc and libm_ifunc macro to use gcc
attribute ifunc. Due to this change, the macro users where the __GI_* symbol
does not target the ifunc symbol have to be prepared with the redirection
construct.
Furthermore a configure check to test gcc support is added. If it is not supported,
the old behaviour is used.
This patch also prepares the libc_ifunc macro to be useable in s390-ifunc-macro.
The s390 ifunc-resolver-functions do have an hwcaps parameter and not all
resolvers need the same initialization code. The next patch in this series
changes the s390 ifunc macros to use this common one.
ChangeLog:
* include/libc-symbols.h (__ifunc_resolver):
New macro is used by __ifunc* macros.
(__ifunc): New macro uses gcc attribute ifunc or inline assembly
depending on HAVE_GCC_IFUNC.
(libc_ifunc, libm_ifunc): Use __ifunc as base macro.
(libc_ifunc_redirected, libc_ifunc_hidden, libm_ifunc_init): New macro.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finite.c:
Redirect ifunced function in header for using as type for ifunc function.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finite.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_finitef.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinf.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isinff.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strstr.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/s_isnanf.c:
Add libc_hidden_def() and use libc_ifunc_hidden() macro
instead of libc_ifunc() macro.
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnanf.c: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise.
TS 18661-1 adds an iseqsig type-generic comparison macro to <math.h>.
This macro is like the == operator except that unordered operands
result in the "invalid" exception and errno being set to EDOM.
This patch implements this macro for glibc. Given the need to set
errno, this is implemented with out-of-line functions __iseqsigf,
__iseqsig and __iseqsigl (of which the last only exists at all if long
double is ABI-distinct from double, so no function aliases or compat
support are needed). The present patch ignores excess precision
issues; I intend to deal with those in a followup patch. (Like
comparison operators, type-generic comparison macros should *not*
convert operands to their semantic types but should preserve excess
range and precision, meaning that for some argument types and values
of FLT_EVAL_METHOD, an underlying function should be called for a
wider type than that of the arguments.)
The underlying functions are implemented with the type-generic
template machinery. Comparing x <= y && x >= y is sufficient in ISO C
to achieve an equality comparison with "invalid" raised for unordered
operands (and the results of those two comparisons can also be used to
tell whether errno needs to be set). However, some architectures have
GCC bugs meaning that unordered comparison instructions are used
instead of ordered ones. Thus, a mechanism is provided for
architectures to use an explicit call to feraiseexcept to raise
exceptions if required. If your architecture has such a bug you
should add a fix-fp-int-compare-invalid.h header for it, with a
comment pointing to the relevant GCC bug report; if such a GCC bug is
fixed, that header's contents should have a __GNUC_PREREQ conditional
added so that the workaround can eventually be removed for that
architecture.
Tested for x86_64, x86, mips64, arm and powerpc.
* math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (iseqsig): New
macro.
* math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(__iseqsig): New declaration.
* math/s_iseqsig_template.c: New file.
* math/Versions (__iseqsigf): New libm symbol at version
GLIBC_2.25.
(__iseqsig): Likewise.
(__iseqsigl): Likewise.
* math/libm-test.inc (iseqsig_test_data): New array.
(iseqsig_test): New function.
(main): Call iseqsig_test.
* math/Makefile (gen-libm-calls): Add s_iseqsigF.
* manual/arith.texi (FP Comparison Functions): Document iseqsig.
* manual/libm-err-tab.pl: Update comment on interfaces without
ulps tabulated.
* sysdeps/generic/fix-fp-int-compare-invalid.h: New file.
* sysdeps/powerpc/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/x86/fpu/fix-fp-int-compare-invalid.h: Likewise.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
Fix powerpc-specific headers:
- Make it compatible to C89 by replace references to inline by __inline__.
- Get the definition of sigset_t used by
sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h.
- Includes missing header file.
When I added fetestexceptflag, I missed that e500 was another case
that needed its own version because saved exceptions were not directly
stored in a form that could be ANDed with exception bits (they were
stored with exceptions in SPE form, but the FE_* macros always use the
classic hard-float form). This patch adds an e500 version with the
required call to __fexcepts_from_spe to convert from one form to the
other.
Tested for e500.
* sysdeps/powerpc/powerpc32/e500/nofpu/fetestexceptflag.c: New
file.
TS 18661-1 defines a type femode_t to represent the set of dynamic
floating-point control modes (such as the rounding mode and trap
enablement modes), and functions fegetmode and fesetmode to manipulate
those modes (without affecting other state such as the raised
exception flags) and a corresponding macro FE_DFL_MODE.
This patch series implements those interfaces for glibc. This first
patch adds the architecture-independent pieces, the x86 and x86_64
implementations, and the <bits/fenv.h> and ABI baseline updates for
all architectures so glibc keeps building and passing the ABI tests on
all architectures. Subsequent patches add the fegetmode and fesetmode
implementations for other architectures.
femode_t is generally an integer type - the same type as fenv_t, or as
the single element of fenv_t where fenv_t is a structure containing a
single integer (or the single relevant element, where it has elements
for both status and control registers) - except where architecture
properties or consistency with the fenv_t implementation indicate
otherwise. FE_DFL_MODE follows FE_DFL_ENV in whether it's a magic
pointer value (-1 cast to const femode_t *), a value that can be
distinguished from valid pointers by its high bits but otherwise
contains a representation of the desired register contents, or a
pointer to a constant variable (the powerpc case; __fe_dfl_mode is
added as an exported constant object, an alias to __fe_dfl_env).
Note that where architectures (that share a register between control
and status bits) gain definitions of new floating-point control or
status bits in future, the implementations of fesetmode for those
architectures may need updating (depending on whether the new bits are
control or status bits and what the implementation does with
previously unknown bits), just like existing implementations of
<fenv.h> functions that take care not to touch reserved bits may need
updating when the set of reserved bits changes. (As any new bits are
outside the scope of ISO C, that's just a quality-of-implementation
issue for supporting them, not a conformance issue.)
As with fenv_t, femode_t should properly include any software DFP
rounding mode (and for both fenv_t and femode_t I'd consider that
fragment of DFP support appropriate for inclusion in glibc even in the
absence of the rest of libdfp; hardware DFP rounding modes should
already be included if the definitions of which bits are status /
control bits are correct).
Tested for x86_64, x86, mips64 (hard float, and soft float to test the
fallback version), arm (hard float) and powerpc (hard float, soft
float and e500). Other architecture versions are untested.
* math/fegetmode.c: New file.
* math/fesetmode.c: Likewise.
* sysdeps/i386/fpu/fegetmode.c: Likewise.
* sysdeps/i386/fpu/fesetmode.c: Likewise.
* sysdeps/x86_64/fpu/fegetmode.c: Likewise.
* sysdeps/x86_64/fpu/fesetmode.c: Likewise.
* math/fenv.h: Update comment on inclusion of <bits/fenv.h>.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fegetmode): New function
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (fesetmode): Likewise.
* bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (femode_t): New
typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/m68k/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (__fe_dfl_mode): New variable
declaration.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/tile/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]
(femode_t): New typedef.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (FE_DFL_MODE): New macro.
* manual/arith.texi (FE_DFL_MODE): Document macro.
(fegetmode): Document function.
(fesetmode): Likewise.
* math/Versions (fegetmode): New libm symbol at version
GLIBC_2.25.
(fesetmode): Likewise.
* math/Makefile (libm-support): Add fegetmode and fesetmode.
(tests): Add test-femode and test-femode-traps.
* math/test-femode-traps.c: New file.
* math/test-femode.c: Likewise.
* sysdeps/powerpc/fpu/fenv_const.c (__fe_dfl_mode): Declare as
alias for __fe_dfl_env.
* sysdeps/powerpc/nofpu/fenv_const.c (__fe_dfl_mode): Likewise.
* sysdeps/powerpc/powerpc32/e500/nofpu/fenv_const.c
(__fe_dfl_mode): Likewise.
* sysdeps/powerpc/Versions (__fe_dfl_mode): New libm symbol at
version GLIBC_2.25.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
As shown by the test math/test-fexcept, the powerpc fesetexceptflag
implementation fails to clear a previously set FE_INVALID flag, when
that flag is clear in the saved exceptions and FE_INVALID is included
in the mask of flags to restore, because it fails to mask out the
sub-exceptions of FE_INVALID from the FPSCR state. This patch fixes
the masking logic accordingly.
Tested for powerpc.
[BZ #20455]
* sysdeps/powerpc/fpu/fsetexcptflg.c (__fesetexceptflag): Mask out
all FE_INVALID sub-exceptions from FPSCR when FE_INVALID specified
to be restored.
I noticed that there was no meaningful test coverage for
fegetexceptflag and fesetexceptflag (one test ensures that calls to
them compile and link, but nothing to verify they work correctly).
This patch adds tests for these functions.
fesetexceptflag is meant to set the relevant exception flag bits to
the saved state without causing enabled traps to be taken. On some
architectures, it is not possible to set exception flag bits without
causing enabled traps to occur. Such architectures need to define
EXCEPTION_SET_FORCES_TRAP to 1 in their math-tests.h, as is done in
this patch for powerpc. x86 avoids needing to define this because the
traps resulting from setting exception bits don't occur until the next
floating-point operation or fwait instruction.
Tested for x86_64, x86 and powerpc. Note that test-fexcept fails for
powerpc because of a pre-existing bug in fesetexceptflag for powerpc,
which I'll fix separately.
* math/test-fexcept-traps.c: New file.
* math/test-fexcept.c: Likewise.
* math/Makefile (tests): Add test-fexcept and test-fexcept-traps.
* sysdeps/generic/math-tests.h (EXCEPTION_SET_FORCES_TRAP): New
macro.
* sysdeps/powerpc/math-tests.h [!__NO_FPRS__]
(EXCEPTION_SET_FORCES_TRAP): Likewise.
As pointer out on the mailing list, the inline assembly code in
sysdeps/powerpc/ifunc-sel.h doesn't have a list of clobbered registers
and used wrong constraints.
This patch fixes that. I verified it doesn't introduce any change in the
generated code.
Changelog:
* sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Add "11", "12", "cr0" to the
clobber list. Use "i" constraint instead of "X".
(ifunc_one): Add "12" to the clobber list. Use "i" constraint instead
of "X".
On 32-bit PowerPC GCC 6 always saves the PIC register on the stack in
the prologue and adjust the stack in the epilogue. It is therefore not
possible anymore to just exit the function in the inline asm code,
otherwise it corrupts the stack pointer. This causes the following tests
to fail when using GCC 6:
FAIL: elf/ifuncmain1
FAIL: elf/ifuncmain1pic
FAIL: elf/ifuncmain1picstatic
FAIL: elf/ifuncmain1pie
FAIL: elf/ifuncmain1staticpic
FAIL: elf/ifuncmain1staticpie
FAIL: elf/ifuncmain1vis
FAIL: elf/ifuncmain1vispic
FAIL: elf/ifuncmain1vispie
FAIL: elf/ifuncmain2pic
FAIL: elf/ifuncmain2picstatic
FAIL: elf/ifuncmain3
FAIL: elf/ifuncmain4picstatic
FAIL: elf/ifuncmain5
FAIL: elf/ifuncmain5picstatic
FAIL: elf/ifuncmain5staticpic
The solution is to replace the beqlr instructions by a beq to the end
of the inline asm code. This fixes all the above failures.
ChangeLog:
* sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Replace beqlr instructions
by beq instructions jumping to the end of the function.
Commit a6a4395d fixed modf implementation by compiling s_modf.c and
s_modff.c with -fsignaling-nans. However these files are also included
from the pre-POWER5+ implementation, and thus these files should also
be compiled with -fsignaling-nans.
Changelog:
[BZ #20240]
* sysdeps/powerpc/powerpc32/power4/fpu/multiarch/Makefile
(CFLAGS-s_modf-ppc32.c): New variable.
(CFLAGS-s_modff-ppc32.c): Likewise.
* sysdeps/powerpc/powerpc64/fpu/multiarch/Makefile
(CFLAGS-s_modf-ppc64.c): Likewise.
(CFLAGS-s_modff-ppc64.c): Likewise.
If the input values are unaligned and if there are null characters in the
memory before the starting address of the input values, strcasecmp
gives incorrect return code. Fixed it by adding mask the bits that
are not part of the string.
This implementation is based on the one already used at
sysdeps/x86_64/fpu/e_expf.S.
This implementation improves the performance by ~14% on average in synthetic
benchmarks at the cost of decreasing accuracy to 1 ULP.
atomic_compare_and_exchange_bool_rel and
catomic_compare_and_exchange_bool_rel are removed and replaced with the
new C11-like atomic_compare_exchange_weak_release. The concurrent code
in nscd/cache.c has not been reviewed yet, so this patch does not add
detailed comments.
* nscd/cache.c (cache_add): Use new C11-like atomic operation instead
of atomic_compare_and_exchange_bool_rel.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_full): Likewise.
* include/atomic.h (atomic_compare_and_exchange_bool_rel,
catomic_compare_and_exchange_bool_rel): Remove.
* sysdeps/aarch64/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/alpha/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/arm/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/mips/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
* sysdeps/tile/atomic-machine.h
(atomic_compare_and_exchange_bool_rel): Likewise.
Some architectures have their own versions of fdim functions, which
are missing errno setting (bug 6796) and may also return sNaN instead
of qNaN for sNaN input, in the case of the x86 / x86_64 long double
versions (bug 20256).
These versions are not actually doing anything that a compiler
couldn't generate, just straightforward comparisons / arithmetic (and,
in the x86 / x86_64 case, testing for NaNs with fxam, which isn't
actually needed once you use an unordered comparison and let the NaNs
pass through the same subtraction as non-NaN inputs). This patch
removes the x86 / x86_64 / powerpc versions, so that those
architectures use the generic C versions, which correctly handle
setting errno and deal properly with sNaN inputs. This seems better
than dealing with setting errno in lots of .S versions.
The i386 versions also return results with excess range and precision,
which is not appropriate for a function exactly defined by reference
to IEEE operations. For errno setting to work correctly on overflow,
it's necessary to remove excess range with math_narrow_eval, which
this patch duly does in the float and double versions so that the
tests can reliably pass on x86. For float, this avoids any double
rounding issues as the long double precision is more than twice that
of float. For double, double rounding issues will need to be
addressed separately, so this patch does not fully fix bug 20255.
Tested for x86_64, x86 and powerpc.
[BZ #6796]
[BZ #20255]
[BZ #20256]
* math/s_fdim.c: Include <math_private.h>.
(__fdim): Use math_narrow_eval on result.
* math/s_fdimf.c: Include <math_private.h>.
(__fdimf): Use math_narrow_eval on result.
* sysdeps/i386/fpu/s_fdim.S: Remove file.
* sysdeps/i386/fpu/s_fdimf.S: Likewise.
* sysdeps/i386/fpu/s_fdiml.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdim.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdimf.S: Likewise.
* sysdeps/i386/i686/fpu/s_fdiml.S: Likewise.
* sysdeps/powerpc/fpu/s_fdim.c: Likewise.
* sysdeps/powerpc/fpu/s_fdimf.c: Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: Likewise.
* sysdeps/x86_64/fpu/s_fdiml.S: Likewise.
* math/libm-test.inc (fdim_test_data): Expect errno setting on
overflow. Add sNaN tests.
This implementation utilizes vectors to improve performance
compared to current byte by byte implementation for POWER7.
The performance improvement is upto 4x. This patch is tested
on powerpc64 and powerpc64le.
The powerpc64 versions of ceil, floor, round, trunc, rint, nearbyint
and their float versions return sNaN for sNaN input when they should
return qNaN. This patch fixes them to add a NaN argument to itself to
quiet sNaNs before returning.
Tested for powerpc64.
[BZ #20160]
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S (__ceil): Add NaN
argument to itself before returning the result.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S (__rint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S (__rintf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S (__truncf): Likewise.
The powerpc32 versions of ceil, floor, round, trunc, rint, nearbyint
and their float versions return sNaN for sNaN input when they should
return qNaN. This patch fixes them to add a NaN argument to itself to
quiet sNaNs before returning. The powerpc64 versions, which have the
same bug, will be addressed separately.
Tested for powerpc32.
[BZ #20160]
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S (__ceil): Add NaN
argument to itself before returning the result.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S (__rint): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S (__rintf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S (__truncf): Likewise.
The powerpc implementations of fabsl for ldbl-128ibm (both powerpc32
and powerpc64) wrongly raise the "invalid" exception for sNaN
arguments. fabs functions should be quiet for all inputs including
signaling NaNs. The problem is the use of a comparison instruction
fcmpu to determine if the high part of the argument is negative and so
the low part needs to be negated; such instructions raise "invalid"
for sNaNs.
There is a pure integer implementation of fabsl in
sysdeps/ieee754/ldbl-128ibm/s_fabsl.c. However, it's not necessary to
use it to avoid such exceptions. The fsel instruction does not raise
exceptions for sNaNs, and can be used in place of the original
comparison. (Note that if the high part is zero or a NaN, it does not
matter whether the low part is negated; the choice of whether the low
part of a zero is +0 or -0 does not affect the value, and the low part
of a NaN does not affect the value / payload either.)
The condition in GCC for fsel to be available is TARGET_PPC_GFXOPT,
corresponding to the _ARCH_PPCGR predefined macro. fsel is available
on all 64-bit processors supported by GCC. A few 32-bit processors
supported by GCC do not have TARGET_PPC_GFXOPT despite having hard
float support. To support those processors, integer code (similar to
that in copysignl) is included for the !_ARCH_PPCGR case for
powerpc32.
Tested for powerpc32 (configurations with and without _ARCH_PPCGR) and
powerpc64.
[BZ #20157]
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S (__fabsl): Use fsel to
determine whether to negate low half if [_ARCH_PPCGR], and integer
comparison otherwise.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S (__fabsl): Use fsel to
determine whether to negate low half.
Continuing fixes for ceil, floor and trunc functions not to raise the
"inexact" exception, this patch fixes the versions used on older
powerpc64 processors. As was done with the round implementations some
time ago, the save of floating-point state is moved after the first
floating-point operation on the input to ensure that any "invalid"
exception from signaling NaN input is included in the saved state, and
then the whole state gets restored rather than just the rounding mode.
This has no effect on configurations using the power5+ code, since
such processors can do these operations with a single instruction (and
those instructions do not set "inexact", so are correct for TS 18661-1
semantics).
Tested for powerpc64.
[BZ #15479]
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S (__ceil): Move save of
floating-point state after first floating-point operation on
input. Restore full floating-point state instead of just rounding
mode.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S (__truncf): Likewise.
Continuing fixes for ceil, floor and trunc functions not to raise the
"inexact" exception, this patch fixes the versions used on older
powerpc32 processors. As was done with the round implementations some
time ago, the save of floating-point state is moved after the first
floating-point operation on the input to ensure that any "invalid"
exception from signaling NaN input is included in the saved state, and
then the whole state gets restored rather than just the rounding mode.
This has no effect on configurations using the power5+ code, since
such processors can do these operations with a single instruction (and
those instructions do not set "inexact", so are correct for TS 18661-1
semantics).
Tested for powerpc32.
[BZ #15479]
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S (__ceil): Move save of
floating-point state after first floating-point operation on
input. Restore full floating-point state instead of just rounding
mode.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S (__truncf): Likewise.
The file sysdeps/powerpc/sysdeps.h defines aliases for condition register
operands. E.g.: 'cr7' means condition register 7. On the one hand, this
increases readability, as it makes it easier for readers to know whether the
operand is a condition register, a general purpose register or an immediate.
On the other hand, this permits that condition registers be written as if they
were general purpose, and vice-versa, thus reducing the readability of the
code.
This commit removes some of these unintentional misuses.
The changes have no effect on the final code. Checked with objdump.
Call __memset_power8 to pad, with zeros, the remaining bytes in the
dest string on __strncpy_power8 and __stpncpy_power8. This improves
performance when n is larger than the input string, giving ~30% gain for
larger strings without impacting much shorter strings.
This patch optimizes strcasestr function for power >= 8 systems. The average
improvement of this optimization is ~40% and compares 16 bytes at a time
using vector instructions. This patch is tested on powerpc64 and powerpc64le.
This utilizes vectors and bitmasks. For small needle, large
haystack, the performance improvement is upto 8x. For short
strings (0-4B), the cost of computing the bitmask dominates,
and is a tad slower.
This patch removes the powerpc64 optimized strspn, strcspn, and
strpbrk assembly implementation now that the default C one
implements the same strategy. On internal glibc benchtests
current implementations shows similar performance with -O2.
Tested on powerpc64le (POWER8).
* sysdeps/powerpc/powerpc64/strcspn.S: Remove file.
* sysdeps/powerpc/powerpc64/strpbrk.S: Remove file.
* sysdeps/powerpc/powerpc64/strspn.S: Remove file.
The ldbl-128ibm implementation of nearbyintl uses logic that only
works in round-to-nearest mode. This contrasts with rintl, which
works in all rounding modes.
Now, arguably nearbyintl could simply be aliased to rintl, given that
spurious "inexact" is generally allowed for ldbl-128ibm, even for the
underlying arithmetic operations. But given that the only point of
nearbyintl is to avoid "inexact", this patch follows the more
conservative approach of adding conditionals to the rintl
implementation to make it suitable for use to implement nearbyintl,
then builds it for nearbyintl with USE_AS_NEARBYINTL defined. The
test test-nearbyint-except-2 shows up issues when traps on "inexact"
are enabled, which turn out to be problems with the powerpc
fenv_private.h implementation (two functions that should disable
exception traps potentially failing to do so in some cases); this
patch duly fixes that as well (I don't see any other existing cases
where this would be user-visible; there isn't much use of *_NOEX,
*hold* etc. in libm that requires exceptions to be discarded and not
trapped on).
Tested for powerpc.
[BZ #19790]
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c [USE_AS_NEARBYINTL]
(rintl): Define as macro.
[USE_AS_NEARBYINTL] (__rintl): Likewise.
(__rintl) [USE_AS_NEARBYINTL]: Use SET_RESTORE_ROUND_NOEX instead
of fesetround. Ensure results are evaluated before end of scope.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: Define
USE_AS_NEARBYINTL and include s_rintl.c.
* sysdeps/powerpc/fpu/fenv_private.h (libc_feholdsetround_ppc):
Disable exception traps in new environment.
(libc_feholdsetround_ppc_ctx): Likewise.
The operand modifier %s on powerpc is an undocumented internal implementation
detail of GCC. Besides that, the GCC community wants to remove it. This patch
rewrites the expressions that use this modifier with logically equivalent
expressions that don't require it.
Explanation for the substitution:
The %s modifier takes an immediate operand and prints 32 less such immediate.
Thus, in the previous code, the expression resulted in:
32 - __builtin_ffs(e)
where e was guaranteed to have exactly a single bit set, by the following
expressions:
(e & (e-1) == 0) : e has at most one bit set.
(e != 0) : e is not zero, thus it has at least one bit set.
Since we guarantee that there is exactly only one bit set, the following
statement is true:
32 - __builtin_ffs(e) == __builtin_clz(e)
Thus, we can replace __builtin_ffs with __builtin_clz and remove the %s operand
modifier.
HWCAP-related code should had been updated when the 32 bits of HWCAP were
used. This patch updates the code in dl-procinfo.h to loop through all
the 32 bits in HWCAP and updates _dl_powerpc_cap_flags accordingly.
On running tests after from-scratch ulps regeneration, I found that
some libm tests failed with ulps in excess of those recorded in the
from-scratch regeneration, which should never happen unless those ulps
exceed the limit on ulps that can go in libm-test-ulps files.
Failure: Test: atan2_upward (inf, -inf)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `atan2_upward'
is : 2 ulp
accepted: 1 ulp
Failure: Test: carg_upward (-inf + inf i)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `carg_upward'
is : 2 ulp
accepted: 1 ulp
The problem comes from the addition of tests for the finite-math-only
versions of libm functions. Those tests share ulps with the default
function variants. make regen-ulps runs the default tests before the
finite-math-only tests, concatenating the resulting ulps before
feeding them to gen-libm-test.pl to generate a new libm-test-ulps
file. But gen-libm-test.pl always takes the last ulps value given for
any (function, type) pair. So, if the largest ulps for a function
come from non-finite inputs, a from-scratch regeneration loses those
ulps.
This patch fixes gen-libm-test.pl, in the case where there are
multiple ulps values for a (function, type) pair - which can only
happen as part of a regeneration - to take the largest ulps value
rather than the last one.
Tested for ARM / MIPS / powerpc-nofpu.
* math/gen-libm-test.pl (parse_ulps): Do not reduce
already-recorded ulps.
* sysdeps/arm/libm-test-ulps: Regenerated.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
Work around a GCC behavior with hardware transactional memory built-ins.
GCC doesn't treat the PowerPC transactional built-ins as compiler
barriers, moving instructions past the transaction boundaries and
altering their atomicity.
Commit 67385a01d2 added a new feature for
powerpc, where we store HWCAP/Platform bits in the TCB. In the dynamic
linking case, we use the versioned symbol
'__parse_hwcap_and_convert_at_platform' to verify if this feature is
available. However, the same symbol was not exported to libc.a, making
it not possible for GCC to check for it prior to link time.
The optimized POWER7 logb implementation does not use the absolute
value of the word extracted from the input to apply the leading 0-bits
builtin (to ignore the float sign). This patch fixes it by
clearing the signal bit in the resulting word.
It fixes the subnormal tests failures when running on POWER7 ou
newer chip.
Tested on powerpc64le (POWER8).
[BZ# 19375]
* sysdeps/powerpc/power7/fpu/s_logb.c (__logb): Fix return for
negative subnormals.
This patch adds a new feature for powerpc. In order to get faster access to
the HWCAP/HWCAP2 bits and platform number (i.e. for implementing
__builtin_cpu_is () / __builtin_cpu_supports () in GCC) without the overhead of
reading from the auxiliary vector, we now reserve space for them in the TCB.
This is an ABI change for GLIBC 2.23.
A new versioned symbol '__parse_hwcap_and_convert_at_platform' is available to
get the data from the auxiliary vector and parse it, and store it for later use
in the TLS initialization code. This function is called very early
(in _dl_sysdep_start () via DL_PLATFORM_INFO for the dynamic linking case, and
in __libc_start_main () for the static linking case) to make sure the data is
available at the time of TLS initialization.
* sysdeps/powerpc/Makefile (sysdep-dl-routines): Add hwcapinfo.
(sysdep_routines): Likewise.
(sysdep-rtld-routines): Likewise.
[$(subdir) = nptl](tests): Add test-get_hwcap and test-get_hwcap-static
[$(subdir) = nptl](tests-static): test-get_hwcap-static
* sysdeps/powerpc/Versions: Added new
__parse_hwcap_and_convert_at_platform symbol to GLIBC-2.23.
* sysdeps/powerpc/hwcapinfo.c: New file.
(__tcb_parse_hwcap_and_convert_at_platform): New function to initialize
and parse hwcap, hwcap2 and platform number information.
* sysdeps/powerpc/hwcapinfo.h: New file. Creates global variables
to store HWCAP+HWCAP2 and platform number.
* sysdeps/powerpc/nptl/tcb-offsets.sym: Added new offsets
for HWCAP+HWCAP2 and platform number in the TCB.
* sysdeps/powerpc/nptl/tls.h: New functionality. Stores
the HWCAP, HWCAP2 and platform number in the TCB.
(dtv): Added new fields for HWCAP+HWCAP2 and platform number.
(TLS_INIT_TP): Included calls to add the hwcap and
at_platform values in the TCB in TP initialization.
(TLS_DEFINE_INIT_TP): Likewise.
(THREAD_GET_HWCAP): New macro.
(THREAD_SET_HWCAP): Likewise.
(THREAD_GET_AT_PLATFORM): Likewise.
(THREAD_SET_AT_PLATFORM): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h:
(dl_platform_init): New function that calls
__parse_hwcap_and_convert_at_platform for the dymanic linking case for
powerpc32.
* sysdeps/powerpc/powerpc64/dl-machine.h: Likewise, for powerpc64.
* sysdeps/powerpc/test-get_hwcap-static.c: New file. Testcase for
this functionality, static linking case.
* sysdeps/powerpc/test-get_hwcap.c: New file. Likewise, dynamic
linking case.
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: Added call to
__parse_hwcap_and_convert_at_platform for the static linking case.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/ld.abilist:
Included the new __parse_hwcap_and_convert_at_platform symbol in the
ABI list for GLIBC 2.23.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/ld.abilist:
Likewise.
This patch optimizes powerpc spinlock implementation by:
* Use the correct EH hint bit on the larx for supported ISA. For lock
acquisition, the thread that acquired the lock with a successful stcx
does not want to give away the write ownership on the cacheline. The
idea is to make the load reservation "sticky" about retaining write
authority to the line. That way, the store that must inevitably come
to release the lock can succeed quickly and not contend with other
threads issuing lwarx. If another thread does a store to the line
(false sharing), the winning thread must give up write authority to
the proper value of EH for the larx for a lock acquisition is 1.
* Increase contented lock performance by up to 40%, and no measurable
impact on uncontended locks on P8.
Thanks to Adhemerval Zanella who did most of the work. I've run some
tests, and addressed some minor feedback.
* sysdeps/powerpc/nptl/pthread_spin_lock.c (pthread_spin_lock):
Add lwarx hint, and use macro for acquire instruction.
* sysdeps/powerpc/nptl/pthread_spin_trylock.c (pthread_spin_trylock):
Likewise.
* sysdep/unix/sysv/linux/powerpc/pthread_spin_unlock.c: Move to ...
* sysdeps/powerpc/nptl/pthread_spin_unlock.c: ... here, and
update to use new atomic macros.
The powerpc hard-float round and roundf functions, both 32-bit and
64-bit, raise spurious "inexact" exceptions for integer arguments from
adding 0.5 and rounding to integer toward zero.
Since these functions already save and restore the rounding mode, it's
natural to make them restore the full floating-point state instead to
fix this bug, which this patch does. The save of the state is moved
after the first floating-point operation on the input so that any
"invalid" exceptions from signaling NaN inputs are properly
preserved. As a consequence of this approach to the fix, "inexact"
for noninteger arguments (disallowed by TS 18661-1 but not by C99/C11,
see bug 15479) is also avoided for these implementations; this is
*not* a general fix for bug 15479 since plenty of other
implementations of various functions still raise spurious "inexact"
for noninteger arguments.
This issue and fix do not apply to builds using power5+ versions of
round and roundf, which use the frin instruction and avoid "inexact"
exceptions that way.
This patch should get hard-float powerpc32 and powerpc64 (default
function implementations) back to a state where test-float and
test-double will pass after ulps regeneration.
Tested for powerpc32 and powerpc64.
[BZ #15479]
[BZ #19238]
* sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Save
floating-point state after first operation on input. Restore full
state rather than just rounding mode.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
Similar to bug 19134 for powerpc32, the powerpc64 implementations of
lround, lroundf, llround, llroundf can raise spurious "inexact"
exceptions for integer arguments from adding 0.5 then converting to
integer (this does not apply to the power5+ version for double, which
uses the frin instruction which is defined never to raise "inexact"; I
don't know why power5+ doesn't use that version for float as well).
This patch fixes the bug in a similar way to the powerpc32 bug, by
testing for integers (adding and subtracting 2^52 and comparing with
the value before that addition and subtraction) and not adding 0.5 in
that case.
The powerpc maintainers may wish to look at making power5+ / power6x /
power8 use frin for float lround / llround as well as for double,
unless there's some reason I've missed that this isn't beneficial.
Tested for powerpc64.
[BZ #19235]
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Do not
add 0.5 to integer arguments.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf):
Likewise.
(.LC2): New object.
