Make the callers of this function check for
straight alpha themselves, and only do the
version compatibility check here. This makes
the function usable in contexts where straight
alpha is acceptable.
When the command queue is out of batches, there is
no point in doing further work like allocating uniforms.
This helps us avoid assertions in the uniform code
that we would hit when we run out of uniform space
too.
When we start ignoring batches, we must do it everywhere,
or we may run into assertions. This was triggered by an
enormous text node tree produced by tests/rendernode-create.
Vulkan has a different initial coordinate system to GL.
GL:
(-1, 1, -1) +------+.
|`. | `.
| `·--|---·
| : | :
+------+. :
`. : `.:
`·------· (1, -1, 1)
Vulkan:
(-1, -1, 0) +------+.
|`. | `.
| `·--|---·
| : | :
+------+. :
`. : `.:
`·------· (1, 1, 1)
so adjust the near and far plane we pass to
graphene_matrix_init_ortho() to make it end up with the same
projection as the GL renderer.
This was the intention, but the object data by itself
does not achieve that: We do run dispose on the display
when it is closed, but object data is only cleared in
finalize. So listen to the ::closed signal and remove
the driver ourselves.
Fix up the drivers dispose implementation enough for
that to actually work.
Most of the time we want to compute them based on the child node we
render to the offscreen, but not always.
For blend and cross-fade nodes, they need to be computed based on the
node's bounds.
Fixes widget-factory page fade animation weirdly resizing the fading
pages.
We weren't looking in the build dir for generated files.
Actually make sure that we look in the build dir *first*, otherwise
glib-compile-resources will still use the wrong files.
... and use it in rendernodes.
Setting up textures for diffing is done via gdk_texture_set_diff() which
should only be used during texture construction.
Note that the pointers to next/previous are allowed to dangle if one of
the textures is finalized, but that's fine because we always check both
textures' links to each other before we consider the pointer valid.
When slicing the texture, the GL renderer was
forgetting to apply the viewport origin. This
shows up when rendering things with negative
scales, leading to negative origins.
Our coverage computation only works for well-behaved
rects and rounded rects. But our modelview transform
might flip x or y around, causing things to fail.
Add functions to normalize rects and rounded rects,
and use it whenever we transform a rounded rect in GLSL.
Pass the GLsync object from texture into our
command queue, and when executing the queue,
wait on the sync object the first time we
use its associated texture.
When adding mask nodes, I overlooked that
we have two separate functions for determining
what transforms a node supports without offlines.
Since we claim that mask nodes support general
transform, they must certainly support 2d transforms
as well.
They're not needed and GLES doesn't technically support them, even
though GTK had been using them via epoxy sneakily using the
GL_OES_vertex_array_object extension behind our back.
gsk_vulkan_render_download_target() currently resets the uploader
objects before downloading the image that it produces. This is
problematic because there might be unreleased buffers and images
in the command queue.
In particular, this can make validation layers complain about the
glyph atlas - of all things! - upload buffer being released while
still being used by the command queue.
Fix that by resetting the uploader after downloading the image.
The current implementation of the glyph cache deals with atlases by
padding them with 1 pixel at the beginning, at the end, and between
each glyph.
That's cool and all, however, there's a very subtle problem with
this approach: the contents of the atlas are garbage, so this padding
is filled with garbage memory!
Rework the Vulkan glyph cache to draw each and every glyph in a
surface that has 1 pixel border of padding around it. Ensure the
surface is completely black by drawing a rectangle before handing
it to Pango to draw the glyph. Update tx and ty to pick the texture
position adjusted to the 1 pixel padding. The atlas now starts at
position (0, 0), since each glyph individually contains its own padding.
To improve legibility, add a PADDING define and use it everywhere.
Vulkan renders text using VK_BLEND_FACTOR_ONE_MINUS_SRC_ALPHA and
VK_BLEND_FACTOR_SRC_ALPHA, but that implies per-channel alpha
blending, which currently produces the wrong results when blending
glyphs with the images beneath them.
Use the default pipeline constructors, which implies using the
ONE and ONE_MINUS_SRC_ALPHA.
Basically what GL does, but without any debug or feature flag
to gatekeep it, since the Vulkan backend itself is experimental
already.
Ceil surface sizes, and floor coordinates, to the fractional scale
value.
The rects passed to the clip region are in buffer coordinates, and
must not be scaled. Consider the following scenario: Wayland, with
a 1024x768@2 window. That gives us a 2048x1536 raw image. To setup
the Vulkan render pass code, we'd scale 2048x1536 *again*, to an
unreasonable 4196x3072, which is (1) incorrect and (2) really
incorrect and (3) can lead to crashes at best, full GPU resets
at worst - and a GPU reset is incredibly not fun!
Now that we pass the right clip regions at the right coordinates
at all times, remove the extra scaling from the render pass.
This part of the Vulkan renderer is almost exactly equal to the GL
renderer, and the GL renderer already does that since at least
2a38cecd33. Copy that into the Vulkan renderer.
A nice side effect from this commit is that resizing a window now
actually works again.
Sneak in a trivial cleanup by using a variable to hold the draw
index.
This was a tricky one to figure out, but it's pretty simple to
understand (I hope!).
So, this AMD card I'm using requires buffer memory sizes to be
aligned to 16 bytes. Intel is aligned to 4 bytes I think, but
AMD - or at least this AMD model in particular - uses 16 bytes
for alignment.
When creating a a particular texture (I did not determin which one
specifically!) a buffer of size 1276 bytes is requested.
1276 / 16 = 79.75, which is clearly not aligned to the required
16 bytes.
We request Vulkan to create a buffer of 1276 bytes for us, it
figures out that it's not aligned, and creates a buffer of 1280
bytes, which is aligned. The extra 4 bytes are wasted, but that's
okay. We immediately query this buffer for this exact information,
using vkGetBufferMemoryRequirements(), and proceed to create actual
memory to back this buffer up.
The buffer tells us we must use 1280 bytes, so we pass 1280 bytes
and everyone is happy, right? Of course not. We pass 1276 bytes,
and Vulkan is subtly unhappy at us.
Fix that by passing the value that Vulkan asks us to use, i.e.,
the size returned by vkGetBufferMemoryRequirements().
This is what GL does, and for a reason: it can lead to width or
height for very small glyphs. Also, switch to dividing by a float
(1024.0) instead of an integer (1024).
This doesn't make any difference now, but will allow us to copy
subregions more easily. This is not obvious, but here's a quick
explanation:
Leaving 'bufferRowLength' and 'bufferImageHeight' implies that
Vulkan will assume the size passed in the 'imageExtent' field.
Right now, this assumption is correct - the only user of this
function is the glyph cache, and it only copies and uploads
exact rects. Next commits will change that assumption, so we
must pass 'buffer*' fields, and tell Vulkan, "this part of the
buffer represents an image of width x height, and I want the
subregion (x, y, smallerWidth, smallerHeight) of this image".
When creating an image using gsk_vulkan_image_new_for_framebuffer(),
it passes VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL.
However, this is a mistake. The spec demands that the initial
layout must be either VK_IMAGE_LAYOUT_UNDEFINED or
VK_IMAGE_LAYOUT_PREINITIALIZED.
Apparently this was an oversight from commit b97fb75146, since the
commit message even documents that, and all other calls pass either
VK_IMAGE_LAYOUT_UNDEFINED or VK_IMAGE_LAYOUT_PREINITIALIZED.
Create framebuffer images using VK_IMAGE_LAYOUT_UNDEFINED, which is
what was originally expected.
Fractional scaling with the GL renderer is
experimental for now, so we disable it unless
GDK_DEBUG=gl-fractional is set.
This will give us time to work out the kinks.
This commit combines changes in the Wayland backend,
the GL context frontend, and the GL renderer to switch
them all to use the fractional scale.
In the Wayland backend, we now use the fractional scale
to size the EGL window.
In the GL frontend code, we use the fractional scale to
scale the damage region and surface in begin/end_frame.
And in the GL renderer, we replace gdk_surface_get_scale_factor()
with gdk_surface_get_scale().
Instead of tracking a single scale, track x and y scales separately.
Factor out gsk_vulkan_render_pass_new() into a private function that
receives both scales, and pass 'scale_factor' for both.
This is mostly a cosmetic change, and the goal is twofold:
1. Make it easier to spot unimplemented render node types; and
2. Prepare for a small rework
The implementation for each node now lives in specific functions,
like the GL renderer; unlike the GL renderer, however, we use a
node type vtable to map GskRenderNodeType → implementation. Render
node without an implementation map to NULL, and use the fallback
implementation. Render nodes that fail any check and return FALSE
also use fallback implementation.
If we encounter a node or texture the 1st time and they are going
to be used again, give them a name.
Then, when encountering them again, print them by name instead
of duplicating them.
We extend the syntax for nodes from:
<node-type> { ... }
to
<node-type> { ... }
<node-type> <string> { ... }
<string>;
where the first is the same as before, the 2nd defines a named node and
the last references a previously defined node.
Or to give an example:
color "node" {
bounds: 0 0 10 10;
color: red;
}
transform {
bounds: 20 0 10 10;
child: "node";
}
This will draw the red box twice, once at (0,0) and once at
(20,0).
The intended use for this is both shortening generated node files as
well as allowing to write tests that reuse nodes, in particular when
dealing with caches.
We extend the syntax for textures from just:
<url>
to
[<string>] <url>
<string>
where the first defines a named texture while the second references a
texture.
Or to give an example:
texture {
bounds: 0 0 10 10;
texture: "foo" url("foo.png");
}
texture {
bounds: 20 0 10 10;
texture: "foo";
}
This will draw the texture "foo.png" twice, once at (0,0) and once at
(20,0).
The intended use for this is both shortening generated node files as
well as allowing to write tests that reuse textures, in particular when
mixing them in texture and texture-scale nodes.
When the GL texture already has a mipmap, we don't
have to download and reupload it to generate one.
We differentiate the handling for texture scale nodes,
where we do want to force the mipmap creation even if
it requires us to reupload the GL texture, and plain
texture nodes, where we just take advantage of a
preexisting mipmap to allow trilinear filtering for
downscaling, or create one if we have to upload the
texture anyway.
Store texture coordinates for each slice
instead of assuming 0,0,1,1, and generate
overlapping slices to allow for proper mipmaps.
This almost fixes trilinear filtering with
sliced textures.
We cheat and just set the texture parameters instead and hope nothing
explodes.
So far it didn't.
This is only needed to support GLES 2.0 so it's quite a limited set of
hardware these days.
Instead of uploading a texture once per filter, ensure textures are
uploaded as little as possible and use samplers instead to switch
different filters.
Sometimes we have to reupload a texture unfortunately, when it is an
external one and we want to create mipmaps.
When filtering changes for an already-cached
texture, we need to clear the render data
before setting the new one, otherwise it
does not take and we end up reuploading
the texture every frame.
Allow to set max texture size using the
GSK_MAX_TEXTURE_SIZE environment variable.
We only allow to lower the max (for obvious
reasons), and we don't allow values smaller
than 512 (since our atlases use that size).
This allows dropping or copy/pasting rendernodes into apps that accept
SVGs.
Not sure how useful this is because we advertise text/plain from
rendernodes already and we prefer that.
In certain scenarios, address the issue where gnome.compile_resources
fails to transmit the present source directory. This is most notably
visible with MSBuild.
Use the same approach and only create an offscreen
that is big enough for the clipped part of the scaled
texture.
If the clipped part is still too large for a single
texture, we give up and just render the texture without
filters (using the regular texture rendering code path
which supports slicing).
The following commit will add the texture-scale-magnify-10000x
test which fails without this fix.
Scale nodes can use large scale factors and we don't want to create
insanely huge Cairo surfaces.
A subsequent commit will add the texture-scale-magnify-10000x
test which fails without this fix.
Cairo surfaces are created transparent.
And even if they weren't, overdrawing with transparency wouldn't erase
what's in the surface because it's a no-op.
It would require CAIRO_OPERATOR_CLEAR or CAIRO_OPERATOR_SOURCE.
The API docs outline why quite well.
This should make it possible to do saving of textures to image files
without any private API with the same featureset that GTK uses.
Also remove the gsktextureprivate.h include where
gdk_texture_get_format() was the only reason for it.
When we truncate the command queue because it
is too big, we were messing up our state accounting
and running into criticals as a consequence.
This can be reproduced by opening a well-populated
fishbowl demo in the inspectors recorder.
Fixes: #5188
Add GskMaskNode, and support it in the render node
parser, in the inspector and in GtkSnapshot.
The rendering is just fallback for now.
Based on old work by Timm Bäder.
By dividing the blur radius to obtain the clip radius, we may end up
with halved values that result in an overshunk clip mask. Extend this
so that we ensure to cover the last pixel.
Fixes artifacts seen with the cairo renderer in X11 when resizing
windows horizontally, a black 1px high line would be seen in the
top of the window due to these outset bounds being used in clipping.
More mysteriously, also seems to fix resize lag in the GL renderer
(also X11), if e.g. the bottom-right corner of a window is resized
diagonally in bottom-left -> top-right direction, or
bottom-right -> top-left.
Related: https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/2175#note_1599335
Instead of asserting only in debug builds (which are generally not
shipped in distributions) we should deliver a critical log-level message
so that these can be found sooner when not developing with jhbuild,
Flatpak, etc.
Also assert that we've setup the state correctly when realizing the
GskGLRenderer object.
Fixes#4625
Those property features don't seem to be in use anywhere.
They are redundant since the docs cover the same information
and more. They also created unnecessary translation work.
Closes#4904
Having the initial layout set to VK_IMAGE_LAYOUT_GENERAL causes issues
when going from the final layout to the initial layout since the image
layout is expected to be the general layout. Setting the initial layout
to undefined doesn't have this restriction.
We now collect this information during node
construction, so use it here.
The concrete change here is that we now avoid
offscreens for container nodes with multiple children,
as long as they don't overlap. In particular, this
avoid offscreens for ellipsized dim labels.
This fixes two issues with the offscreen rendering code for nodes with
bounds not aligned with the pixel grid:
1.) When drawing to an offscreen buffer the size of the offscreen buffer
was rounded up, but then later when used as texture the vertices
correspond to the original bounds with the unrounded size. This could
then result in the offscreen texture being drawn onscreen at a slightly
smaller size, which then lead to it being visually shifted and blurry.
This is fixed by adjusting the u/v coordinates to ignore the padding
region in the offscreen texture that got added by the size increase from
rounding.
2.) The viewport used when rendering to the offscreen buffer was not
aligned with the pixel grid for nodes at coordinates not aligned with
the pixel grid. Then because the content of the offscreen buffer is not
aligned with the pixel grid and later when used as textures sampling
from it will result in interpolated values for an onscreen pixel. This
could also result in shifting and blurriness, especially for nested
offscreen rendering at different offsets.
This is fixed by adding similar padding at the beginning of the
texture and also adjusting the u/v coordinates to ignore this region.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3833
This moves a lot of the texture atlas control out of the driver and into
the various texture libraries through their base GskGLTextureLibrary class.
Additionally, this gives more control to libraries on allocating which can
be necessary for some tooling such as future Glyphy integration.
As part of this, the 1x1 pixel initialization is moved to the Glyph library
which is the only place where it is actually needed.
The compact vfunc now is responsible for compaction and it allows for us
to iterate the atlas hashtable a single time instead of twice as we were
doing previously.
The init_atlas vfunc is used to do per-library initialization such as
adding a 1x1 pixel in the Glyph cache used for coloring lines.
The allocate vfunc purely allocates but does no upload. This can be useful
for situations where a library wants to reuse the allocator from the
base class but does not want to actually insert a key/value entry. The
glyph library uses this for it's 1x1 pixel.
In the future, we will also likely want to decouple the rectangle packing
implementation from the atlas structure, or at least move it into a union
so that we do not allocate unused memory for alternate allocators.
This removes the sharing of atlases across various texture libraries. Doing
so is necessary so that atlases can have different semantics for how they
allocate within the texture as well as potentially allowing for different
formats of texture data.
For example, in the future we might store non-pixel data in the textures
such as Glyphy or even keep glyphs with color content separate from glyphs
which do not and can use alpha channel only.
This allows the gskglprograms.defs a bit more control over how a shader
will get generated and if it needs to combine sources. Currently, none of
the built-in shaders do that, but upcoming shaders which come from external
libraries will need the ability to inject additional sources in-between
layers.
