If qputenv fails, the test should fail rather than skip, particularly as
the test is supposed to be testing qputenv.
Change-Id: Iabe13d360cabaeffda46fab19f1dd0d4ed8e1eee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There were only two ways the QSKIP could be called: (1) the C++ runtime
is broken, or (2) the earlier call to resize the string failed.
In both cases there should be a hard test failure. In the former case, a
broken C++ runtime calls all of the test results into question. In the
latter case, the QByteArray::resize() method has suffered a regression.
Change-Id: I5adf942d2eb4d746d2ab31e98571c5d9bdd40890
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The bug referenced in the QSKIP has been marked as resolved, so this
QSKIP should no longer be needed.
Change-Id: I41dd964827a3df8fb5ebb9674cef9db59c03d432
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Fix typos I was able to find in `tests/auto' directory.
Change-Id: Id0bfcc18301381ac8b1ca8d5af17bd926e5913d4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This commit re-enables tests that are assumed to be ok by now, since they:
- Have been passing in CI for a long time recently (more precisely, not failed once in pulse run range 730-829).
- Did not have any known issues associated with them.
Note that not all of these tests were disabled as a result of QTBUG-21402.
Task-number: QTBUG-21402
Change-Id: I80bbf8b351bd9165aa968e98f4dc17e8be6bc7c3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Returning text "1.00" instead of "1" sounds right to me.
Checking the test before the widget is shown/validated sounds pointless.
Change-Id: Ifc9e51dc9448a5bb3afbd566fe10524fbabc654f
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
The qrc tests need further investigation.
Bring at least back the basic test.
Change-Id: I302a37b6c989af76db67716ffcf10a0960234156
Reviewed-by: Kristoffer Flottorp <kristoffer.flottorp@nokia.com>
Due to clearAccessCache being made part of the public API in Qt5,
this autotest can be run on normal Qt builds again
Task-number: QTBUG-17312
Change-Id: I3b70237a28ed141ffb49762cc40c8a528f9be6a8
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Fix QtSQL aoto test server addresses. New servers are located in
Brisbane. Old Oslo test servers shall not be used anymore.
Change-Id: Icd4ae4c0193f71410d572bfa014272e1e77586c0
Reviewed-by: Trust Me
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I02fe27b2c1800f929250fa8694ca2976c9661a12
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I3c1d993d5682db913aadc267d98a638061f393d6
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Ibd0f3f0605660c92e9bab2a3d1d9f31b52192575
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If the test decides not to do some extra testing for certain styles, but
doesn't find any failures in what it has done so far, it should pass
rather than skipping. Removing the QSKIPs also corrects the leakage of
the memory pointed to by "widget".
Change-Id: Id4cf7e8dc48f836d2c6dcde57dde87797a2fe036
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Several test functions use IPv6 reverse lookups, which evidently don't
work on HPUX 11i, but only one of these tests was skipped on that
platform and the others presumably fail.
This commit also removes the commented-out test data and makes it easier
to put some useful test data back. QTBUG-22287 records the fact that no
real IPv6 hostnames are currently used in the reverseLookup test.
Change-Id: Iff1ed1b725492bcc28ca4cb5f8e2dc106887c0b4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I97046aa51f1b3fc100e2eb2fa115f1bf8ae6437d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I7c1ffe9c8c294dbdc988e1582e580b1ed3f4593e
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
These macros should only be called inside a test function, otherwise
they cannot abort the test function correctly. Solve this by making the
helper function return a boolean result (and output a warning on
failure to help with debugging) and verify the return value in each test
function that calls the helper.
Change-Id: I599673fda49051baf80a8c94b5d85a4d8c2cb406
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The standard IPv4 loopback address is 127.0.0.1, however anything in
the 127.0.0.0/8 range is also a loopback address.
isLoopback returns true for any address that is in the IPv4 loopback
address range, or is the single IPv6 loopback address ::1
Task-number: QTBUG-22246
Change-Id: Ic39100e2e97a52db700e01b109998a1cfd4335e3
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
Moving three benchmark tests from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void asScrollingList();
- void cacheBenchmark();
- void contiguousCacheBenchmark();
were moved to 'tests/benchmarks/corelib/tools/qcontiguouscache'
Task-number: QTQAINFRA-353
Change-Id: Icbdd852f9c14c3df042d2e19abd42af6c645a3cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Using relative paths in #include is best avoided.
Change-Id: Iacaab7b4c402dfc96f944f21c634afa6e4a2a32a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The queries were limited to current block, because that is the
available surrounding text. Input method side, however, cannot then
distinguish between anchor being really at start or end of the
surrounding text, or beyond it. Without the limitation there at least
is a way to know anchor is at unknown territory.
Change-Id: I388d33566388344ec816ea7d86662b7e36a3d7d0
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Moving benchmark test from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void benchmark();
was moved to 'tests/benchmarks/sql/kernel/qsqlquery'
Task-number: QTQAINFRA-353
Change-Id: I241bb1a2fba1c1b5524c21e5941a6c5daf5a4a89
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Which required porting the related unittests to qstandardpaths
Change-Id: I6eb63c46845f05cd29cc42b59872707526277c90
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
With this change, the file template is always processed in original
QString format. Trying to generate native paths before adding a missing
placeholder mask could change the meaning of templates, such as "." and
"..", which are now tested to mean "..XXXXXX" and "...XXXXXX",
respectively.
After ensuring the template includes a placeholder mask, the path is
converted to a native *absolute* file path and the mask is sought for
again. On Windows, native paths were already absolute. On Symbian, we'd
need at least a clean path, as "." and ",," are not natively understood.
There is a requirement that the placeholder mask /XXXXXX+/ makes it
through this conversion unaltered, which relaxes prior requirements on
*nix platforms. On Windows and Symbian the conversion is under Qt's
control and not user-configurable.
Reviewed-by: Shane Kearns
(cherry picked from commit 401722ef9e6fe79bd41f9d5f79668f5c4997c8e6)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Iac823881c865adf0931dc4f429c6c1ef135eeb56
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Besides generating a unique name, createFileFromTemplate now also
acquires a file handle on all platforms. The file engine's native handle
is passed by reference and modified in place.
This fixes a long standing security issue on Windows.
On Windows and Symbian platforms we directly use the "native" file path
when processing the template and generating the unique name. Since the
native encoding is known, conversions at this point are safe.
Errors other than "file exists" are propagated to Q(Temporary)File,
and result in a failure in open(). The changes also unify error handling
and should give consistent behaviour across all platforms.
Worthy of note, there's a change in behaviour on Windows and Symbian:
fileNames returned by QTemporaryFile on Windows and Symbian are always
absolute after open has been called. This has to do with how
QFileSystemEntry::nativeFilePath works on these platforms. (Test was
updated to reflect change in behaviour.)
Reviewed-by: Gareth Stockwell
Reviewed-by: Shane Kearns
(cherry picked from commit ff9b69838ec146aeb43d4af8a03043f9c5f0454d)
Conflicts:
tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp
Change-Id: Ibc9affb321ea4f4b193efc1f7336c9770b43d8df
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When the SkipAll mode is used, tests only report a SKIP for the first
line of test data and subsequent lines are not reported at all. This
behaviour makes it impossible for anything post-processing test results
to accurately report test pass- and run- rates because they cannot see
how many lines of test data were skipped.
This commit removes SkipMode. QSKIPs in regular test functions and data
functions are treated the same as SkipSingle, so that every skipped line
of local or global test data is reported in the test log. QSKIPs
elsewhere are treated the same as SkipAll -- skipping in init() causes
the next test function to be skipped entirely, and skipping in
initTestCase() or initTestCase_data() causes all test functions to be
skipped.
This commit only changes qtestlib and the selftests. A further commit
will change the autotests to remove the SkipMode parameter from QSKIP
calls.
Note that the change in expected output for the globaldata selftest is
deliberate, as the QSKIP in the skipLocal test function has effectively
changed from SkipAll to SkipSingle.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I7b1c53fe7ca9dde032810b789d967e2a402bbe5d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Alex <alex.blasche@nokia.com>
Removed the bogusFds test, as it is only run on symbian in 4.8
Forward ported the posixSockets fix from 4.8
Task-number: QTBUG-20892
Change-Id: I8a8c67e12eae402724bbb07fe37e7ea1770aaeee
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Now, users of QBasicAtomicInt and QBasicAtomicPointer must be sure to
use .load() and .store() to access the values.
Change-Id: I6b48ed175618baf387dd38d821bd50e6e93c082e
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add a ok return value for whether found or not.
Task-number: QTBUG-21672
Reviewed-by: Olivier Goffart
Change-Id: Ic0ea7455dccf1ac91705bcc1479444eb4091ded3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Liang Qi <liang.qi@nokia.com>
Example of message of failed assert (gcc 4.6, file tst_qglobal.cpp:300):
tst_qglobal.cpp:300:92: error: invalid application of ‘sizeof’
to incomplete type ‘QStaticAssertFailure<false>’
Change-Id: Ic1798094f718eaad388d754034115aafbbb6bd5e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
By making it possible to specify the place in memory where a
type should be constructed, any meta-type can be allocated on
the stack, for example. In the QML/JS QObject binding, this
makes it possible to call slots and access properties from
JavaScript without having to perform any mallocs (e.g. due to
QVariant creation) in the C++ <--> JS value conversion, in
the best case.
In addition to QMetaType::construct() and QMetaType::destruct(),
this change introduces QMetaType::typeSize(), which returns the
size of a type in bytes. This can be used to prepare a suitable
buffer for constructing a type using construct().
Benchmarks indicate that in-place construction is 2-5x faster
than normal construction for core and GUI types on linux-g++.
Note that there is already a QMetaType::construct() function
in Qt 4, which has been renamed to QMetaType::create() in Qt 5.
In order to avoid existing usages of construct() in user code
to call the Qt 5 construct() (when they really meant to call
create()), the third argument ("copy") of construct() is made
mandatory. Hence, calls to QMetaType::construct() written for
Qt 4 will cause a compile error when compiled with Qt 5, and
the user must adapt his code.
Task-number: QTBUG-12574
Change-Id: I836f06f6ee1c1c3edbd199a03424c78c942bdd3e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Use a standard path for filenames that appear in the selftest's expected
test data. This will make future patches smaller.
Change-Id: I04b2e739d261f80d20b834e5b33c5b6e88d26379
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test duplicates the skipinitdata selftest and has slightly less
informative output.
Change-Id: Ifd40e3ef8030059ec8fa0089ce5b2a994624abeb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The DEPENDS_ON macro didn't do anything and has misled many users to
think that they can write test functions that depend on other test
functions.
Task-number: QTBUG-21851
Change-Id: Ibe65b2d5d88bb81b6a0ebbe0b220f7d409a1446c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions have lived in tests/shared/util.h for a long time, but
they really belong in qtestlib.
Change-Id: I60d569d002dea220b51563931d8b7aa77a20b98b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that this test won't be testing anything until it gets fixed
for Qt5.
Change-Id: I4fa73883f58d8d4a533a7c21ecd4dd5b3c55b174
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that this test isn't testing anything when not built for X11.
Change-Id: I9e9ef8fe738c06eb86f2ce398f6a515bf17e220a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no way for a .pro file to know if QProcess is in the Qt build,
so the QProcess autotest cannot be omitted from the build if QProcess is
not available. Because of this limitation, the test was using
QTEST_NOOP_MAIN when QProcess was not available, making the test appear
to pass. This commit changes QTEST_NOOP_MAIN to QSKIP, so that the user
receives a clear indication that the test isn't testing anything when
QProcess is not available.
Change-Id: I79f667b17ff98dfc47eb61fb977365abef8883fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that these tests aren't testing anything when the required
defines are not defined.
Change-Id: I977e24205a1bb7787ecddbdb1ebbeda1f2ded321
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use QSKIP instead of QTEST_NOOP_MAIN so that the user receives a clear
indication that these tests aren't testing anything when the required
defines are not defined.
Change-Id: I8508f50c6264fafa836090c5d6ffa6ce02dda102
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The addition of testing for multiple loggers greatly increased the total
runtime of this test, in fact making it the slowest testcase in Qt.
Fortunately this is only due to a couple of slow subtests whose behavior
is unlikely to be affected by the loggers. Change it to run these slow
subtests just for a couple of loggers, instead of all the combinations.
Change-Id: Ie90f6c0ca29470ed6a7c4e2e185f852602a2d162
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
There is no way for a .pro file to know if exceptions are supported in
the Qt build, so these tests cannot be omitted from the build if
exceptions are not supported. Because of this limitation, these tests
were using QTEST_NOOP_MAIN when exceptions were not available, making
the tests appear to pass. This commit changes QTEST_NOOP_MAIN to QSKIP,
so that the user receives a clear indication that the test isn't testing
anything when exceptions are not available.
Change-Id: I2facf08ba69e6f985e2da50dd36ad2658246b22e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The QCopChannel class was removed during Qt5 refactoring.
Change-Id: I62914eca1db65c680d90233ce9dad5d891890c4a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The qgraphicswidget and qgraphicsproxywidget tests are empty if Qt is
built without the cleanlooks style, so don't build the tests in that
case.
Change-Id: I2308e723a9b0abcc3e95b32a562fcb02afe0444d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test appears to be applicable only if building with g++, and even
then the test is broken.
Change-Id: I9eefb13325a10ec295a59c2bd1111e3c324ff94f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was empty, the logic having been recently removed because it
only applied to the Carbon UI, which will not be supported by Qt5.
Change-Id: I2b5d6aba6be4a51eadbac3ca9d19d1a68c4fc1ab
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is only valid with obsolete Qt Solutions packages. Any Qt
Solutions that are still of value need to be rewritten as Qt5 addons and
will be delivered with their own unit tests.
Change-Id: I099ef816655cc7de13715f5a4e5f4a06099df2d5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make the parent .pro files follow the pattern of listing all tests in
one place and then removing inapplicable tests as needed.
Change-Id: Ide1ae98d50dd63cd8c1b4d6fd53135cdff801bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is only useful on Windows, so avoid building it elsewhere
rather than building an empty test.
Change-Id: I01d91266bcb2dd242e02e70741ad5b81a13c33f0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The tools tests are not built for cross-compiled Qt builds, so the logic
to make those tests empty when cross-compiled is redundant.
Change-Id: Ia3a3a680d7ade2cee78aa633b41c9ef5be6f2f15
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rather than building the test with all the logic #ifdef'd out, just
avoid building the test at all.
Change-Id: I394f48b2dacb40325d03de719096da36fcb7312a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
All but one of these tests was already excluded from the build on
non-Mac platforms, but still had #ifdef's to make the test empty if
compiled on a non-Mac platform.
Change-Id: I1a3677c1cdb7bd467cf4317ed4cfbac89e934e76
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test verifies that all gui types with built-in QMetaType
support can be created, either using the default constructor
or the copy constructor.
Change-Id: Ibb1c5aab8571b598638c74112471d6869516a202
Reviewed-on: http://codereview.qt-project.org/6344
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It only tested creating a copy of QSize.
This change adds testing of all core types, both
copy and non-copy creation.
Change-Id: If2b8fb45718c4a976dd8b883b332878f7fb0da6f
Reviewed-on: http://codereview.qt-project.org/6343
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Enrich playWithVaraint template by a macro that returns correct line
number in case of failure.
Change-Id: I7684169852481a6905b71e4420135e7e3f298b12
Reviewed-on: http://codereview.qt-project.org/6570
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The reference file has suffered whitespace changes during the cherry
pick from 4.8. Refetched from the test server.
Change-Id: I03a0b7a66cf6743de3391905422b2f4cdcd86dcf
Reviewed-on: http://codereview.qt-project.org/6454
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
It is better to avoid building a test when we know that it is not
applicable, rather than building an empty test that appears to pass.
Note that some of the tests were already excluded by
tests/auto/other.pro, but still had the preprocessor directives to make
an empty test.
Change-Id: I71b75c37a05f6e20dbef43d82f72b29b35ef496a
Reviewed-on: http://codereview.qt-project.org/6410
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If Qt is built without QtConcurrent, the relevant autotests should be
excluded from the build, rather than building empty tests that appear
to pass and thus produce confusing test results.
Change-Id: I43bafcb0ffa42e8981bec4e27bf6a23a28d86df9
Reviewed-on: http://codereview.qt-project.org/6395
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The platformsocketengine autotest uses the native socket engine directly
rather than through QAbstractSocket. The bind tests were failing because
the autotest was creating a socket with IPv4 (AF_INET) and then binding
with QHostAddress::Any (AF_INET6).
A linux kernel update caused this to start failing on the test machines.
Change-Id: Iea62f3d56dbfb35fcb952dcf00313578eb2bd764
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Now QInputPanel::visible() can be set true even when platform doesn't provide
a virtual keyboard. Like keyboard geometry, visibility should be dictated by
the platform plugin and not QInputPanel, whose role is more like that of a mediator.
QInputPanel::show() and ::hide() calls should be treated as requests that may fail.
Changed the QInputPanel's visible property to read-only as a setter that may
fail is not really a setter, show() and hide() should be used instead.
Enabling the new functionality cannot be activated immediatelly without breaking
existing keyboards, added a temporary function handlesInputPanelVisibility that
handovers the responsiblity of updating input panel visibility to QInputContextPlatform
only once QInputContextPlatform says that it is able to handle it.
Change-Id: Ideecaf7225cc3971f33a0ac976bd92cf7767475b
Reviewed-on: http://codereview.qt-project.org/6429
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Pekka Vuorela <pekka.ta.vuorela@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
create() is symmetric with destroy().
Also rename the internal methods and fields to be
consistent (qDeleteHelper already had the "right"
name, though!).
This change will allow us to use construct() and
destruct() for something else: Placement new-style
allocation (QTBUG-12574).
The old construct() is still kept for now, until
the other repositories have been updated to use
create().
Change-Id: Iceb184af6cffcb0a634359cfc3516c718ba0c2f5
Reviewed-on: http://codereview.qt-project.org/6342
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Use the QMetaObjectBuilder code from declarative and add it to libQtCore.
Consolidating various QMetaObjectBuilder implimentations to avoid
code duplications in those modules.
This is currently still a private API only.
Change-Id: Ie363b4fd769c41efbb3caa7fb1d6f77af13c3c9c
Reviewed-on: http://codereview.qt-project.org/6287
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Alex <alex.blasche@nokia.com>
There was logic in .pro files for the dbus tests to omit the body of
each test if dbus was not available in the Qt build. This was all
redundant however, because tests/auto/auto.pro already excluded all dbus
tests if dbus was not available in the Qt build.
Change-Id: Iaea06e38622e5227daec4d2e08106c2da3fb4013
Reviewed-on: http://codereview.qt-project.org/6372
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove the usage of Q_MAC_USE_COCOA and Carbon code paths.
Change-Id: Ib569ad8c6d9ffe258f454b3c3b06e95294a10112
Reviewed-on: http://codereview.qt-project.org/5100
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Sanity-Review: Morten Johan Sørvig <morten.sorvig@nokia.com>
QScreen now has a primary and current orientation, and a QWindow can set
its orientation as well. The current screen orientation is just a hint
to the application.
Change-Id: I4635982cfac2d16634d4edd5c6ab78e9d0ac55a4
Reviewed-on: http://codereview.qt-project.org/5988
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add a couple of previously excluded lines of code that should work for
all platforms.
Change-Id: I5f0b5365060a91cb708a3143b28f7de703fc419e
Reviewed-on: http://codereview.qt-project.org/6196
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed warnings just repeat information that is already in the
QSKIP's that immediately follow the warnings.
Change-Id: Id13158487e8075aab8a8f48955303edde3f4af63
Reviewed-on: http://codereview.qt-project.org/6194
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Q_CHECK_PAINTEVENTS was guaranteed to be defined prior to the code that
was conditional on it being undefined.
Change-Id: I8b48a2c6bff997de7d0e3f640203308718dd865b
Reviewed-on: http://codereview.qt-project.org/6193
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Calling qFatal may result in test output not being well-formed.
Change-Id: Ia16bade4d3311485c6ba4dd23d5624d18b192b71
Reviewed-on: http://codereview.qt-project.org/6190
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP already causes the test function that calls it to return, so the
returns removed by this commit were unreachable.
Change-Id: I1fa2f3a3271927d8a600b02d8b31bd81db9146b1
Reviewed-on: http://codereview.qt-project.org/6188
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Unix the table1 interface was replaced by the table2 interface, while
table1 is still used on other platforms. This commit changes the test
so that only the applicable test functions are built and run, where
previously both sets of tests were built and one set would always skip.
Change-Id: I5a785fb88fcbf4e5896e1fdb80c7c0a659597e34
Reviewed-on: http://codereview.qt-project.org/6097
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is so that the results of LayoutTests in WebKit are
more in line with what things were like in Qt 4.8.
Change-Id: I25962e03bd8e0316cb303c0d94c25ac4e73ea9a8
Reviewed-on: http://codereview.qt-project.org/6162
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
according to the Unicode specs, code point U+0085 should be treated
like a white space character (an exceptional Cc one)
Change-Id: Ib17ae0c4d3cdafe667cafa38b645138ef24c238c
Merge-request: 32
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-on: http://codereview.qt-project.org/6158
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
There were two fixes in 4.8 which each fixed a part of the problem.
Comparing canonical paths is more correct, but is only possible where
both directories exist. If neither directory exists, then compare
absolute paths instead.
Changed a regression test, because /tmp is a symbolic link on MacOS.
I.E. "/tmp/.." is canonically "/private" and not "/" as expected.
Task-Number: QTBUG-20495
Reviewed-By: joao
(cherry-picked from ad35d25e78c8252a72108a4ba931934047c4707e)
Change-Id: Ia4986e8337f0e512e1a3398a5a4dd36e62680b9c
Reviewed-on: http://codereview.qt-project.org/5813
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is in order to have a regression test for QT-5304.
However the test is also checking basic functionality of head
requests too.
Task-Number: QT-5304
Change-Id: I0d98bd1f1125ffd49d9f3c859a51b2aaee95379a
Reviewed-By: Martin Petersson
Reviewed-on: http://codereview.qt-project.org/6033
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
We can't rely on absolute paths when comparing directories for equality
as these don't take into account symbolic links and may also bypass ../
and ./ simplification.
Instead, canonical paths must be computed and can then be compared
according to the case sensitivity rules for the platform or file engine,
as is done in QFileInfo.
Task-number: QTBUG-20495
Reviewed-by: Prasanth Ullattil
(cherry-picked from dcee6e1371d899eb79717b8e3f3eec08b765db82)
Change-Id: Ib5f2a6ee11311c55782ea5dd0e9c3b45f9231686
Reviewed-on: http://codereview.qt-project.org/5812
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The QSKIP is only reachable on Mac, so only compile it for Mac.
Change-Id: I268e87829e01755051f81cdaf856d936b04b3d49
Reviewed-on: http://codereview.qt-project.org/6091
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTestLib already makes a superior version of this functionality
available to all tests, without the need to recompile. Each qtestlib
test program can be passed, via the command line, a list of test
functions and test data tags to be executed instead of executing all
test functions.
Change-Id: I1b54fc70a0c58a17209817afabfb953b5748dac4
Reviewed-on: http://codereview.qt-project.org/6015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Omit focusColors test function at compile-time in preference to
skipping at run-time. Also removed commented out code.
Change-Id: Ib8955656f5a43b30df95b4c9865e52902dbd6b1e
Reviewed-on: http://codereview.qt-project.org/6010
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Remove empty constructor/destructor. Remove dropDownDeleted test
function which has been entirely skipped since before Qt 4.0, is
obviously incomplete (it attempts to use a QComboBox that does not
exist) and provides no statement of intention that might allow the
incompleteness to be addressed.
Change-Id: I4975b6d5a5dde1e58dab1dd393be92eddeb4c9f8
Reviewed-on: http://codereview.qt-project.org/6009
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test was a no-op on Mac OS. It's better to avoid building or running
it on Mac OS, rather than spending time compiling and running a test
that does nothing on that platform.
Change-Id: I4aa579036788e404f8a6a8f1a80acd32338fb3cd
Reviewed-on: http://codereview.qt-project.org/5958
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This also uncovered a missing implementation of child for
dock widgets.
Change-Id: Iac4c5a51d4626769af11b277a9a345e1e31dc490
Reviewed-on: http://codereview.qt-project.org/5987
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
The operator tested by this function (QMatrix * QRect) has not existed
since Qt 2.x.
Change-Id: Id09154de2bdda70c0fe342fe78b82709953e2b56
Reviewed-on: http://codereview.qt-project.org/5965
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test was being skipped one test function at a time on IRIX. It's
better to avoid building or running it, rather than spending time
running a test that does nothing on that platform.
This commit also turns a silent skip on other platforms into an explicit
QSKIP to make it more obvious that there's an unfixed TODO there.
Change-Id: I7cae4f0f2eaebf5977a781b2ce15d1e71ef13b36
Reviewed-on: http://codereview.qt-project.org/5957
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The unprintablenames test was designed to prevent an old failure in
QDir from returning, but the test can't be run reliably on some
file-systems and certainly isn't going to achieve its goal when it's
commented out.
Change-Id: Ib4cb965d59c291ab2436130b87e865ac21b9b483
Reviewed-on: http://codereview.qt-project.org/5956
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Renamed QGuiApplication::activeWindow() to
QGuiApplication::focusWindow(), implemented QWindow::isActive() as a
style hint, and added focus in / out events.
Change-Id: I71866e76c5a817def3e17bcc20a4fc32081a0e7a
Reviewed-on: http://codereview.qt-project.org/5811
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I582732e3dd657df834f9a98fd52d7ee368f2f29b
Reviewed-on: http://codereview.qt-project.org/5946
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: Ib2025339422749cf216e87ac414a3056250bf8f9
Reviewed-on: http://codereview.qt-project.org/5942
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Functions that modify the d-pointer must detach or otherwise take
measures to not modify the const, read-only shared_null.
The setSharable(bool) function takes care to detach when setting
sharable to false, but should avoid setting the sharable data member
unless d is not the shared null.
Similarly, QMap<Key, T>::setInsertInOrder() needs to detach if it is
shared with the shared_null (the logic has been updated to be the same
as setSharable()).
Change-Id: Ida5cb9818b86695f1b9f0264418b955c56424898
Reviewed-on: http://codereview.qt-project.org/5929
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I21664d8d92b27c26c64789fc08d0ec7b8988456a
Reviewed-on: http://codereview.qt-project.org/5941
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QPixmapCache has until now refused to throw out shared pixmaps, i.e.
ones that still have shallow copies lying around. This leads to problems
when someone inserts two shallow copies using different keys, causing
the cache itself containing multiple shallow copies and thus forever
refusing to throw out those entries.
It's rather easy for this to accidentally happen in a user application
since QPixmap::load() or QPixmap(const QString &fileName, ...)
automatically cache the pixmap in the QPixmapCache, thus if the user
then calls QPixmapCache::insert() on the same pixmap or a shallow copy
it is locked in the QPixmapCache forever.
The only reason for not throwing out a pixmap that's shared would be to
prevent re-loading a pixmap from file when a user has a direct reference
to it in his application, but in that case the user is unlikely to
re-load the pixmap from file in any case. Therefore it seems the best
fix is to get rid of this limitation.
Task-number: QTBUG-21359
Reviewed-by: John Brooks
Reviewed-by: Olivier Goffart
(cherry picked from commit 7ab0bed3a56d46c386e65abc381264c57137cb43)
Change-Id: I46dce19227e19a25e0287cf7372177430da15a66
Reviewed-on: http://codereview.qt-project.org/4563
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Most of these changes are search-and-replace of d->ref ==, d->ref !=
and d->ref =.
The QBasicAtomicPointer in QObjectPrivate::Connection didn't need to
be basic, so I made it QAtomicPointer.
Change-Id: Ie3271abd1728af599f9ab17c6f4868e475f17bb6
Reviewed-on: http://codereview.qt-project.org/5030
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test was fixed by 1cc70b92c8
Change-Id: If6fa3724f7c31e952ebff1dd27fea1a1e4635a85
Reviewed-on: http://codereview.qt-project.org/5783
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
This test was fixed by db3418c10b
Task-number: QTBUG-21125
Change-Id: I1bc549353f16c0df2b6c33533298b302fcc4d4ed
Reviewed-on: http://codereview.qt-project.org/5877
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I31e069f5476f8adf9851e94b33c6afac4394b88e
Reviewed-on: http://codereview.qt-project.org/5824
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Moved most stuff to gui\accessible
* Moved widget-specific stuff to widgets\accessible
* Moved platform-specific code to either the bridge plugin (this was already the case)
or to the platform plugin.
* Added several classes and functions. These have not yet gone through an API
review. The plan is to do that in a later commit.
Classes:
- QPlatformAccessibility
- QWindowsAccessibility
Functions:
- QWindow *QAccessibleInterface::window();
- QPlatformAccessibility *QPlatformIntegration::accessibility()
* The bridge code can now either be a plugin or integrated into the platform plugin
* Mac accessibility is left out for now. Unix "should still work" (tm). These platforms
should be fixed soon.
Change-Id: Ib49ffa73b647ee0af90864544c2769440157f562
Reviewed-on: http://codereview.qt-project.org/5330
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This function was deprecated in Qt4 and has
been replaced by isNavigationBarVisible.
Same for the setter.
Change-Id: Ifdcbaa2db0d4d8d475d959a6409347fa19d443a9
Reviewed-on: http://codereview.qt-project.org/5788
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
QWidget is not in QtGui anymore, this broke the
test. Simply use QWindow instead.
Change-Id: Ic0176410f08b10771b663aa3ecd70295c124b662
Reviewed-on: http://codereview.qt-project.org/5757
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
No surprises, QTemporaryFile("tempXXXXXX") fails. But that is
consistent with QFile::open, and it's documented, so ok.
Change-Id: I04c805a242aeda8327d25be238da6120b3c90f5a
Merge-request: 57
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-on: http://codereview.qt-project.org/5714
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
QInputContext is migrated to QInputPanel, which allows only one
instance.
Change-Id: I4912164790d5a6bdff41e11cbe4bc4e2f9f111ec
Reviewed-on: http://codereview.qt-project.org/5641
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This change makes QTest::qWarn() consistent with similar testlib
functions, which take __FILE__ and __LINE__.
Change-Id: I12977cb30672899ab38877b4a656f0cc0c7ea02c
Reviewed-on: http://codereview.qt-project.org/3559
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Before the text edit tried to represent each line of text as a child
of itself. With the editable text interface this is no longer needed.
Change-Id: If9927e522f955e863e91fd0a529a1ce6fafaddc3
Reviewed-on: http://codereview.qt-project.org/5624
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This adds the value interface and removes the children of the dial.
Change-Id: I47eac77c01dce36db077f553054ef37353242f77
Reviewed-on: http://codereview.qt-project.org/4821
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
The selftests already used the @INSERT_QT_VERSION_HERE@ placeholder
in place of the real Qt and QTestlib versions in the expected test
output of the subtests. For unknown reasons, the same was not true for
the expected plain text output. In the past, this has caused Release
Managers to waste time incrementing the version numbers in these files.
Change-Id: I52f7870486fce128c04d53ff06978afa947474fd
Reviewed-on: http://codereview.qt-project.org/5375
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no test with a datatag "float", so this code is never executed.
Change-Id: I9dd234e6575eb1c33075705edf77eb1d977061c9
Reviewed-on: http://codereview.qt-project.org/5362
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Q_ASSERT uses __FILE__, which has undefined contents, and thus the
selftest cannot always match Q_ASSERT messages in actual output with
those in expected output. The test was calling QEXPECT_FAIL() in this
case, but doing so implies that (a) it's a failure and (b) we intend to
fix it one day. Neither of these is true, so instead we should simply
tolerate this difference in actual and expected outputs, in the same way
that we do in a couple of other similar cases.
Change-Id: I8b8609a400e9b798936875f6eb1ca18a83660efc
Reviewed-on: http://codereview.qt-project.org/5358
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These functions should not take care not to unconditionally set the
capacityReserved private member, since the d may be referencing the
const shared_null or shared_empty which live in read-only memory.
The squeeze() methods check for ref > 1 instead of ref != 1 to prevent
detaching from the shared_null/shared_empty unnecessarily; the
shared_null/shared_empty ref count is -1, meaning squeeze() will never
detach from it.
Change-Id: Id3f1725a6f08b3a462343640a47bbe78f08ca7e7
Rubberstamped-by: Lars Knoll
Reviewed-on: http://codereview.qt-project.org/5454
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QWidget's move() sets the position of the window including the window
frame, unlike setGeometry(). There was no equivalent for this in
QWindow, so several QWidget auto-tests were failing. Now we add
setFramePos() to achieve the same purpose in QWindow.
This fixes tst_QWidget::windowState(), which uses move().
Change-Id: I9a3e558bd615a8f0234cc3dd94fbb2bf5ecbc148
Reviewed-on: http://codereview.qt-project.org/5405
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In QWidget::setWindowState() there was some code to emulate window
states when they're not supported by the backend, by hiding the window
on minimize or using the screen geometry and the frameless window hint
to manually try to make a window fullscreen.
However, some of this code was being run even when the backend does
support setting window states, specifically calling setParent(0) to
force a re-creation of the platform window and calling show(). These led
to the window getting the wrong position after being minimized or
fullscreen and going back to the normal state.
Apart from storing the normal geometry of a widget when going away from
the normal state we shouldn't do any magic when the call to
QPlatformWindow::setWindowState() succeeds.
tst_QWidget::windowState() still fails due to calling move() to set the
position of the widget including the frame, when QWindow currently only
supports setting the position of the widget excluding the frame.
Change-Id: I1c1a337d3c15f14c1c842bd1e347f94e6b67d7eb
Reviewed-on: http://codereview.qt-project.org/5367
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Simplify the combobox implementation by removing child logic.
Instead have an option to open the combobox.
Change-Id: I1bb517d0d064aefa28594b8fa957b8b2c9d48e88
Reviewed-on: http://codereview.qt-project.org/5032
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
QFontDatabaseQPA should be able to reinitialize database and
reregister all the fonts when an application font is added, because
it will trigger db->invalidate().
Add cloneWithSize support to QFontEngineBox so that even no usable
font is found in QFontDatabase, QRawFont::setPixelSize can still
work (without making the result rawfont invalid).
Register application fonts with QFontconfigDatabase, the code is
adapted from QFontDatabaseX11.
Reenable QRawFont tests for QPA, these usages are now supported in
QPA.
Fix QStaticText tests, raster in QPA does support transformations.
Translate the text before ZAxix rotation so that it will be visible
in canvas.
Add back fixedPitch support to QPA, and fix QFontDatabase tests.
Fix QGlyphRun tests, ignore non-existence glyphs in alphaMap
locking.
Fix QFontMetrics tests.
Task-number: QTBUG-21415, QTBUG-20754, QTBUG-20977,
QTBUG-20976, QTBUG-20760, QTBUG-20759
Change-Id: I24aea7d6ec6b2ac6342134d1f2591327c23a692b
Reviewed-on: http://codereview.qt-project.org/5384
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Tests for widgets should select the
QWidget * version of overloaded QTestLib
functions rather than the QWindow * version.
Change-Id: I8b540b630758c0e7ba7ed88aba45d624c83ff378
Reviewed-on: http://codereview.qt-project.org/4977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Each destination and the format of output to write there is specified by
adding "-o filename,format" to the command-line. The special filename
"-" indicates that the log output is written to the standard output
stream, though standard output can be used as a destination at most
once.
The old-style testlib output options are still supported, but can only
be used to specify one logging destination, as before.
If no logging options are given on the command-line, a plain text log
will go to the console, as before.
To log to the console in plain text and to the file "test_output" in
xunit format, one would invoke a test in the following way:
tst_foo -o test_output,xunitxml -o -,txt
This commit also enhances the selftests to test with multiple loggers,
but negative tests (e.g. bad combinations of command-line options) are
left for future task QTBUG-21567.
Task-number: QTBUG-20615
Change-Id: If91e752bc7001657e15e427aba9d25ab0a29a0b0
Reviewed-on: http://codereview.qt-project.org/4125
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Modify the selftest to be able to run each subtest with a list of one or
more test loggers. The addition of tests that use this capability will
be part of a subsequent commit.
Task-number: QTBUG-20615
Change-Id: Iac3efe8220e8245aa7e5589348d2c86b8034dd28
Reviewed-on: http://codereview.qt-project.org/5292
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The multiexec test runs the same test object five times. If the -o
option is given, the output file is overwritten by each run of the test
object, meaning that tst_selftest only sees 1/5 of the test output in a
file compared with what it sees on the console. This makes it
impossible to use the expected output file to verify the test for both
console and file output. This issue is noted in QTBUG-21561.
Change-Id: I00031a2ea43a7ef78e8317473a089306ec062d8e
Reviewed-on: http://codereview.qt-project.org/5270
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The warnings selftest verifies that qtestlib correctly handles output
sent via qDebug() and friends. The test had a number of printf calls
that were used to tell the user what output they should expect to see
next, but by bypassing testlib's logging, these made the testlog differ
depending on whether the test log was directed to the console or a file.
The printf calls are no longer needed, as any regressions in qDebug will
be detected by tst_selftests, which compares the output of the warnings
test with a reference copy of the expected output.
Change-Id: I8c3a3237463141fa494c50ca02062760cb583090
Reviewed-on: http://codereview.qt-project.org/5200
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Make the test use qDebug instead of printf, so that the reference test
output is the same regardless of whether the log goes to the console or
a file.
Also rename the test class, as it was evidently cut-n-pasted from the
subtest selftest without being renamed.
Change-Id: I8df1f0989f2e8c33c1f829ba8110fd740ff70f63
Reviewed-on: http://codereview.qt-project.org/5184
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test was attempting to verify two completely unrelated things, so
this commit splits it into two tests.
Also, printf calls are replaced by qDebug so that the test does not
bypass the testlib loggers.
Change-Id: I1a202af38ce2c69690a32d93405ba604ec6cabee
Reviewed-on: http://codereview.qt-project.org/5178
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test is not useful for finding bugs in qtestlib's logging code,
because it bypasses the qtestlib loggers and doesn't play nice with
tst_selftest. Neither is this test very useful for finding bugs in
QTest::qWait(), as the test only proves the qWait() terminates, not that
it waits accurately, or even that it waits at all.
Change-Id: Ia5dd7cbaf3a6fbb4e94e54ed155263580e495694
Reviewed-on: http://codereview.qt-project.org/5173
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Move handling of -qmljsdebugger= argument from QApplication
to QCoreApplication. It makes sense to allow debugging also
for applications based on QCoreApplication (which we intend
to support in QtDeclarative).
Change-Id: I5a03a4510fc166cea5aad146da673ee0e7cd5d36
Reviewed-on: http://codereview.qt-project.org/5121
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Stop the mis-use of navigate to find the parent.
In order to make navigation straight forward
parent and child functions are now part of
QAccessibleInterface.
This allows navigating the hierarchy of
accessible objects without the 1-based indexes in the
navigate function which lead to confusion.
Eventually the support for Ancestor in navigate can be completely removed
and forwarded in the windows bridge if needed.
In addition default parameters for virtual children.
This will make the transition smooth since it allows to remove the integer
already.
Change-Id: I278287ce17161f9fa46797ac244676778c859576
Reviewed-on: http://codereview.qt-project.org/5024
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Autotests that don't need QtGui or QtWidgets
api shouldn't link against those libraries.
Change-Id: I2808289068514fcac582808828ad4634e2631733
Reviewed-on: http://codereview.qt-project.org/5093
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Problem was fixed by Change Ie172e935: Revert accidental v8 submodule version downgrade
Change-Id: Ie0467170df70e9fcc10837150103d48ddd48734b
Reviewed-on: http://codereview.qt-project.org/5006
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
If the MKSPEC we get is an absolute path, we should
pass that one on to qmake. Otherwise it'll try to
find the mkspec in the install location. This fails
as 'make check' is being run before installation.
Task-number: QTBUG-21402
Change-Id: Ie872546f2ee7c5d737e50a1779637e393538ccc2
Reviewed-on: http://codereview.qt-project.org/4999
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Don't store separate strings for the logger name and the associated file
suffix -- just use the same string everywhere.
Change-Id: Ie7d1af6bf906b5ac09fbd5fcc5754b68036fb370
Reviewed-on: http://codereview.qt-project.org/5060
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The selftest was only attempting to delete the output file at the end of
the entire test run. This file should actually be deleted after each
subtest to ensure that it does not cause confusing errors if the next
subtest fails to overwrite the output file.
Change-Id: Ia3827926f71a697c6108de3f2b08c969f761d978
Reviewed-on: http://codereview.qt-project.org/5051
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The removed calls related to tests that were removed when redundant
logging functionality was removed.
Change-Id: Iaebbc109eaaddb440ae78e1f4a1b4e874a8b2960
Reviewed-on: http://codereview.qt-project.org/5050
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* Use C++ comment delimiters consistently
* Use a space after control flow keywords
* Don't nest "else if" blocks unnecessarily
* Follow indenting rules
* Added comments describing some internal functions
Change-Id: I72fd1eaf5c5f3130945fbd2b64fa59e19ad2913d
Reviewed-on: http://codereview.qt-project.org/5049
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Commit 949be8cbdd modified the assert test
case but failed to update the line number of the assert in the expected
test output files.
Change-Id: I0d4f55c0b8bc1de8487dd8c6267aa459000cda26
Reviewed-on: http://codereview.qt-project.org/5048
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In C++11 push_back is overloaded to support rvalue-references,
void std::vector<T>::push_back(const T &);
void std::vector<T>::push_back(T &&);
so attempting to get the address for push_back is ambiguous.
Instead of hardcoding the function signature, the better and more
general solution is to allow the compiler to do the required overload
resolution itself, also allowing for implicit conversions to take place.
Task-number: QTBUG-18996
Done-with: Liang Qi
Reviewed-by: Olivier Goffart
(cherry picked from commit ca34cc75294e0d2a8bc491a2c679fe8a69cd0408)
Change-Id: Id271118e489f888905e491dd4cfc3d2db7697552
Reviewed-on: http://codereview.qt-project.org/4642
Reviewed-by: Liang Qi <liang.qi@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Some of the complex' widgets children can return
QAccessibleInterfaces.
Ideally all complex widgets should be removed, this eases the transition.
Change-Id: If3d7f28f97dac8cf5018a2c4c4b33709a3d4595c
Reviewed-on: http://codereview.qt-project.org/4788
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
Make it inline; add fast checks for typical spaces;
add fallback function that uses the fastcall calling
convention.
On ia32, this change makes isSpace ~340x faster for
ascii spaces, ~170x faster for non-space ascii
characters, and ~1.3x faster for non-ascii characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the behavior
is the same.
Change-Id: I9438d0ad3c9ba2e80560c4bee7eed05115265798
Reviewed-on: http://codereview.qt-project.org/4905
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make it inline; add fast checks for ascii letters
and digits; add fallback function that uses the
fastcall calling convention.
On ia32, this change makes isLetterOrNumber ~120x
faster for ascii letters and digits, ~150x faster
for non-letter/digit ascii characters, and ~1.3x
faster for non-ascii characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the
behavior is the same.
Change-Id: Ia4e13692f4dd79f6aa0b96da29449e0487971b0e
Reviewed-on: http://codereview.qt-project.org/4904
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make it inline; add fast checks for ascii letters;
add fallback function that uses the fastcall calling
convention.
On ia32, this change makes isLetter ~370x faster for
ascii letters, ~250x faster for non-letter ascii
characters, and ~1.5x faster for non-ascii characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the
behavior is the same.
Change-Id: I06f8d3d43114537cee5567e670898cef6494c20a
Reviewed-on: http://codereview.qt-project.org/4903
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make it inline; add fast checks for ascii digits;
add fallback function that uses the fastcall calling
convention.
On ia32, this change makes isDigit ~370x faster for
ascii digit characters, ~250x faster for non-digit
ascii characters, and ~1.5x faster for non-ascii
characters.
Note that this change is NOT binary compatible.
Also add an autotest with expected results from
before the optimization, to ensure that the
behavior is the same.
Change-Id: I718fadecda3f591d6f4c22374d8e476f4724fd83
Reviewed-on: http://codereview.qt-project.org/4902
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gabi
Change-Id: I99b08f8b41f483c92ae175630b812e4b299069b6
Reviewed-on: http://codereview.qt-project.org/4916
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
QIcon has not been moved to QtGui after all, re-introduce
QtWidgets-dependent code path.
Task-number: QTBUG-21402
Change-Id: I61c37babaeceadf7d53c10736bcc847758adaf1b
Reviewed-on: http://codereview.qt-project.org/4775
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
prepareToRender() might call adjustSize() resulting in the widget's size
changing, so we should make sure to call adjustSize() _before_ we decide
on the required pixmap dimensions.
Task-number: QTBUG-21402
Change-Id: Ie72b46bc8e8e22f848769f78187f47ae9f4e37d3
Reviewed-on: http://codereview.qt-project.org/4772
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test attempts to enforce various conventions onto Qt's autotests.
Many of the things enforced by this test became obsolete from Qt4 ->
Qt5 (because Qt5 CI is much less "magic" than Qt4 CI).
The merge of `refactor' branch obsoletes even more.
The remaining valuable part of this test should be moved into the `qtqa'
module as a shared test, because it applies to all modules, not just
qtbase.
Change-Id: I2402bca32e43c597f14b8ff6ca729563ff8efbfe
Reviewed-on: http://codereview.qt-project.org/4926
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The test got moved one level down in the directory tree,
but tries to find the top level directory. Fix paths
to make it work again.
Change-Id: I7b80a1c6891e7f1aa013a89203f651aa3ea932e8
This QEXPECT_FAIL is obsoleted by Commit 2cca7e0884
Change-Id: I97bf9d8f0db50435b785bb1d2e1d60369d67aad2
Reviewed-on: http://codereview.qt-project.org/4764
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Necessary to avoid CI blocking.
The tests should be enabled again as soon as possible.
Task-number: QTBUG-21424
Change-Id: Ib25da5b9a1fdb23e00a5c503db90d306deb90f06
Reviewed-on: http://codereview.qt-project.org/4768
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Holger Ihrig <holger.ihrig@nokia.com>
Necessary to avoid CI blocking.
The tests should be enabled again as soon as possible.
Task-number: QTBUG-21424
Change-Id: Ibc54723855579095be0dea3bd3e071dd22a1fccf
Reviewed-on: http://codereview.qt-project.org/4825
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
This change disables failing tests to increase the
likelihood that 'make check' terminates with a zero
exit status. This is done to prevent the CI system
from blocking further commits once qtbase#refactor
is merged into qtbase#master.
Failing tests are marked as insignificant (by putting
'CONFIG += insignificant_test' in the .pro file).
Note: This is a temporary measure that needs to be cleaned up
once the refactor->master integration is complete.
Ideally all disabled tests need to be enabled and passing.
All changes will be marked by the string QTBUG-21402 in a comment
for easy location.
Task-number: QTBUG-21402
Change-Id: Ic4400671671f6d9b75b106a6aa4755b20e74378d
Reviewed-on: http://codereview.qt-project.org/4678
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This is simpler than the existing texture cache in QtOpenGL, as it only
serves the GL paint engine. There's one per context group, to simplify
the design and to prevent performance degradations.
Change-Id: I61e3c9a444d8e246a8b38da019a56f2c0a533c0c
Reviewed-on: http://codereview.qt-project.org/4674
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
as shortcutDestroyed(..) modifies the shortcuts list.
disconnect from shortcutDestroyed() first, or operate on a detach()-ed list
this was uncovered by QList::removaAll() optimization patch.
(cherry picked from commit e95de30977291a251660f72baa84b5ff244711fb)
Change-Id: Ie0b371c54458ce85f4d36430de8080a5e78d8b7f
Reviewed-on: http://codereview.qt-project.org/4585
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Commit 2cca7e0884 overloads
QTestLib so that QWindow * can be passed directly to
certain functions.
This fix disambiguates access to the new API by selecting
the QWindow * versions. This assumes that the QWidget *
versions are kept mostly for backwards compatibility.
Change-Id: I075196d86d8d1d38f7192dace3c3892d315bf671
Reviewed-on: http://codereview.qt-project.org/4655
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Commit 2cca7e0884 overloads
QTestLib so that QWindow * can be passed directly to
certain functions.
This fix disambiguates access to the new API by selecting
the QWindow * versions. This assumes that the QWidget *
versions are kept mostly for backwards compatibility.
Change-Id: I8755c86d5ebeb275dfa9162b0168d9179a61982d
Reviewed-on: http://codereview.qt-project.org/4640
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
The other/ subdirectory should still be built via other.pro.
This was overlooked by Commit 0a208dd413
Task-number: QTBUG-21327
Change-Id: Ie8ebd7dfc5b1dd56ca1b629aa011d160cb563ddd
Reviewed-on: http://codereview.qt-project.org/4526
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QOpenGLFramebufferObject must be wrapped in a QOpenGLPaintDevice
before being passed to QPainter::begin().
Change-Id: Ic82f8f17b2ea18a3790de7e75f0dd6c9092528ed
Reviewed-on: http://codereview.qt-project.org/4541
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
These tests used requires(contains(QT_CONFIG,private_tests)) in their
.pro file, but did not subtract themselves from their parent project
SUBDIRS when private_tests weren't enabled.
In the best case, this wastes a little time as qmake iterates over these
projects which won't be built. In some worse esoteric cases, this may
break compilation or packaging.
Change-Id: I189c108ee9943b15114becf9d6b04f78dbabbe31
Reviewed-on: http://codereview.qt-project.org/4389
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Use the new PCMPESTRM instruction (Parallel CoMPare Explicit-length
STRings with result in a Mask) which is added in SSE4.2 for
facilitating string operations. The "compare ranges" mode allows us to
search for characters outside the Latin 1 range and then use the
SSE4.1 PBLENDVB instruction to replace those with question marks.
Unlike previous SSE compare instructions, the PCMPxSTRx family allows
us to operate on unsigned 16-bit values. This saves us another
parallel add.
Reviewed-By: Samuel Rødal
(cherry picked from commit 45d2d36c9dbcbce403c78838ea52acd1ab111b68)
Change-Id: I0f9d864f9d19c0f0da43ccb6918dc28295074496
Reviewed-on: http://codereview.qt-project.org/4468
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Commit 079ec157f8 overloads
the touch event API in QTestLib so that QWindow * can be
passed directly to certain functions.
This fix disambiguates access to the new API by selecting
the QWindow * versions. This assumes that the QWidget *
versions are kept mostly for backwards compatibility.
Change-Id: Ib6b33edc64d81f300d4109d59fd29f25ccd605db
Reviewed-on: http://codereview.qt-project.org/4443
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
The more the merrier.
Change-Id: I401ed97600a890c38cb4d5dbe0578d6bcf68e909
Reviewed-on: http://codereview.qt-project.org/4322
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
QNetworkProxy takes an hostname, not an url.
Change-Id: I7504fbc02a817d6c75ee55dc8bbdd66ec1e6cd01
Reviewed-on: http://codereview.qt-project.org/4373
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Some of these trigger pre-refactor as well by adding a QTest::qWait()
after QTest::qWaitForWindowShown().
Change-Id: I48863fd31fc0c3b51463ed922782e86c21f05bff
Reviewed-on: http://codereview.qt.nokia.com/4272
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
This fixes a few bugs in QML mode name resolution and simplifies
our V8 patchset a little by folding some patches together.
Change-Id: Ia528a43ac8ccad95ac81bcdff5d05aaeab4b48b2
Reviewed-on: http://codereview.qt.nokia.com/4294
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
This autotest is using private symbols, available only when Qt is
configured with -developer-build.
Change-Id: I9bf221040b8225ed173761c7ee23e69efd85c3cb
Reviewed-on: http://codereview.qt.nokia.com/4148
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
Unmask the last character typed, not the last character in the string.
Change-Id: I9c70d2347bf878c18ab0a7f4ea76f755ca19a85c
Task-number: QTBUG-17003
Reviewed-by: Alan Alpert
(cherry picked from commit b98e9e69dd8ba33d5f01b9518d95b63b86c4b443)
Reviewed-on: http://codereview.qt.nokia.com/4165
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Many applications relied on the undefined behaviour that the
filesystem engines returned clean paths (despite the documentation
stating that they may not), and consequently suffered regressions with
Qt 4.8.
Unix paths are once again cleaned if necessary.
Windows/Symbian paths were already cleaned, but now use the utility
function to check if a path is dirty, to avoid duplicated code.
Task-number: QTBUG-19995
Change-Id: If8c18469f149291c9d079ae3da23bc2087bbd49a
Reviewed-on: http://codereview.qt.nokia.com/4154
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
QDir::operator== was creating a clean absolute path for comparison
purposes if the original path was relative.
However original absolute paths were trusted, even though they could
be unclean. Now they are checked for cleanliness first.
Task-Number: QTBUG-19995
Task-Number: QTBUG-20495
Change-Id: I047a1a40ae5151e4604085e4ac87f30a4e4979c4
Reviewed-on: http://codereview.qt.nokia.com/4099
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Also export two symbols for auto tests since opaque keys
need EVP_PKEY * created by openssl.
Change-Id: Ib7801ddfceb259de7291bfaa5940df87f68af97d
Merge-request: 48
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/4011
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
This appears to serve no purpose.
It was probably copy-pasted from assert.pro.
Change-Id: Ie3d9605b969ee11f2d64c1ac3e480e9efb862a3c
Reviewed-on: http://codereview.qt.nokia.com/4016
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test intentionally crashes itself by using Q_ASSERT.
Since Q_ASSERT is a no-op in release builds, the .pro file was
attempting to always force debug mode for this project.
However, on platforms where debug vs release affect linkage (e.g. mac
and windows), this is invalid. On these platforms, debug mode can't be
enabled unless debug versions of the Qt libraries are available, which
they are not if Qt is configured with `-no-debug-and-release -release'.
Use a different method to ensure that Q_ASSERT really asserts, for both
debug and release builds.
Change-Id: I13eea2c72c77a0a981850dbcaa77f65f147c8490
Reviewed-on: http://codereview.qt.nokia.com/4015
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Added Test for qmetaproperty
Marked QSocketNotifier Autotest as insignificant. See QTBUG-21204
Marked qtranslator Autotest as insignificant. See QTBUG-21125
Marked corelib/io/qfile/largefile as insignificant. See QTBUG-21175
Task-number: QTBUG-21066
Change-Id: I2a7f6587845c355091bb07c8dd3d1557d16db0be
Reviewed-on: http://codereview.qt.nokia.com/3598
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
By not waiting until deleteLater() kicks in it's easier to auto-test. We
can now add a test case for what happens when a shared resource is still
valid while the last context is destroyed.
Change-Id: I72963928e6a921e49ed59a79e2579b497ba37ccf
Reviewed-on: http://codereview.qt.nokia.com/3732
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Both the old and new XML loggers produce the Complete and Light XML log
formats, while only the new logger produces Xunit XML logs. The
disadvantage of the new logger is that it is more complex and doesn't
produce a partial log if the test fails to terminate gracefully. This
behaviour arises because Xunit format output cannot be written correctly
until all tests have been executed.
This commit removes the Complete and Light XML formats from the new
logger, using the old logger to produce those formats and the new logger
to produce only Xunit XML. Prior to this commit, the qtestlib selftests
demonstrate that the old and new loggers produce identical output for
Complete and Light XML.
This commit also removes the undocumented -flush command-line option,
which was used rather obscurely to select between the old and new
loggers.
The newer logger will be renamed to QXunitTestLogger in a subsequent
commit.
Change-Id: Id304f5b411bdd520409ee233f6bc34e8917942ab
Reviewed-on: http://codereview.qt.nokia.com/3923
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Basically breakage by <windows.h> being included from the OpenGL
parts of <QtGui/QtGui> included from <QtTest/QtTest>.
Change-Id: Id285fb89c64bf77e2408faac5688acd085579351
Reviewed-on: http://codereview.qt.nokia.com/3952
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The selftest for assert messages calls QEXPECT_FAIL if the assert
message doesn't exactly match the expected output. This is because
Q_ASSERT uses __FILE__, which is compiler-dependant.
The expected output for this test contains various hard-coded unix
paths meaning that the test never passes on any platform. This commit
removes those paths from the test data so that the test passes for
compilers that don't put path information in __FILE__. This commit also
makes the XFAIL message more accurate -- absolute paths in assert
messages don't come from QTestLib, they come from Q_ASSERT's use of
__FILE__.
Change-Id: I9aae212379b43a29ae83715717cc978b4b619420
Reviewed-on: http://codereview.qt.nokia.com/3908
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The toUpper/Lower() methods in QString should not
be locale dependent, as this can lead to rather
hard to find bugs in at least a turkish locale.
Rather have explicit, locale dependend case conversions
available in QLocale.
Reviewed-by: Denis Dzyubenko
(cherry picked from commit da0e1e101bb4c44c25b6523357fa81ad1b2d6539)
Change-Id: I1cc3f341bef17ad573a736dc94c9c5d514ace54e
Reviewed-on: http://codereview.qt.nokia.com/3259
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
regenerating blacklisted certificates with same serial number and
common name, but longer validity: Now they are valid for 10 years.
(cherry picked from commit a3d22777028b102b7f65cf2db9719f5d57308b04)
Change-Id: I7884484c2f61b3a55f671faa38967e62fc8954f0
Reviewed-on: http://codereview.qt.nokia.com/3894
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Marked Test for qdiriterator as insignificant. See QTBUG-21160
Marked Test for qresourceengine as insignificant. See QTBUG-21159
Task-number: QTBUG-21066
Change-Id: I72848a651ff3e7aff1d6105dd49124e4ed070a44
Reviewed-on: http://codereview.qt.nokia.com/3577
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The newer test logger did not produce the same light XML output as the
logger that it replaced. In particular, it did not output the <DataTag>
tag and it incorrectly nested a <Message> tag inside the <Incident> tag
when a fatal error occured in a test.
Unfortunately, it appears that the expected lightxml output for the
selftests was produced by running tests using the newer logger, while
the selftests did not use the older lightxml logger. Thus the errors
were not detected by the selftests.
This commit adds the older lightxml logger to the selftests, updates the
expected test data accordingly, and modifies the newer lightxml logger
to behave correctly. This last item is achieved by making the lightxml
streamer copy most of the code from the xml streamer -- lightxml output
is supposed to be same as xml, except for the omission of the root and
<TestCase> tags.
Change-Id: Ie6e1f69dd6000df2b9d0c5c8e2109fe7bbff3956
Reviewed-on: http://codereview.qt.nokia.com/3902
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For XML logs, an Incident tag with no sub-tags has a space before the
closing slash. For Light XML logs, this space was missing unless the
-flush command line option was supplied.
Change-Id: I6de2e140f9309f333b5b97ed7f8116e4e727a149
Reviewed-on: http://codereview.qt.nokia.com/3871
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The omission of spaces is crucial in order for the
regular expressions in configure to be able to detect
that v8.pro isn't a "main project" file.
Task-number: QTBUG-21168
Change-Id: I2e94736ee3195bed7fd528759b1bc1812f1ae54c
Reviewed-on: http://codereview.qt.nokia.com/3878
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
blacklist the leaf certificate for now. There might well be more fake
certificates in the wild, for that either the Diginotar.nl root cert
needs to be disabled on the system or OCSP would need to be enabled
(not supported by Qt yet).
Reviewed-by: Richard J. Moore <rich@kde.org>
(cherry picked from commit 70f6a1b91b242174682c30be976c2aa36c450cc7)
Change-Id: I7cd3fdc4c6e85202914764f983a60d301e54aa35
Reviewed-on: http://codereview.qt.nokia.com/3893
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Adding tests for QFutureSynchronizer and QtConcurrentResultStore
Added minor things in QFutureSynchronizer and QtConcurrentResultStore and removed tests for destruction
Task-number: QTBUG-21066
Change-Id: I9f088b89463340f339c914bcb37fb2f9d3b62057
Reviewed-on: http://codereview.qt.nokia.com/3477
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Ensure the right test macro is run.
Change-Id: I84d58038f25b000c05fd52e8bda92e4484d53a6e
Reviewed-on: http://codereview.qt.nokia.com/3805
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test attempted to ensure that tests/auto/auto.pro would only refer
to other .pro files, attempting to guarantee that the set of all tests
could be cleanly broken up. The purpose of this was to enable CI
optimizations (e.g. running the autotests for different modules on
different machines in parallel).
This test is invalidated by pending commits which rearrange the
autotests, and we never made use of this property for optimization
anyway, so drop this part of the test.
Change-Id: I23e712fb8ec1dbe7ac65fe66015e1f060f3dcd41
Reviewed-on: http://codereview.qt.nokia.com/3681
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
This test sometimes passes and sometimes fails.
Task-number: QTBUG-21098
Change-Id: Ic56e93d12a7b3fa2e9c135e25610bf1119fa636e
Reviewed-on: http://codereview.qt.nokia.com/3548
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
QTBUG-21102 is currently blocking integration of several commits.
Marking the test as unstable until the bug has been fixed.
Change-Id: I9b630767fd1aa4369564f5e90c63e850808385e1
Reviewed-on: http://codereview.qt.nokia.com/3584
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
This autotest is not needed anymore since qtessellator was
removed by 78169e6b06
Change-Id: I438e5bf2fd44da73461bb6fc311a6dce5573e467
Reviewed-on: http://codereview.qt.nokia.com/3496
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Implement the IAccessible table2 interface for itemviews.
This is simpler than what we have in complexwidgets.
For now it is only used on Linux.
The new table2 interface is ifdef'ed to only be used on X11.
Improve handling of accessible events and clean up.
There are two xfails for the Table and Tree where sibling
navigation is not implemented yet.
Reviewed-by: Gabi
(cherry picked from commit e797ba558dddd45522b5a317316e497e9efc44a8)
(cherry picked from commit eff5ecc5d8f65fa25d6cfd6ed96a9d2a00d0c663)
(cherry picked from commit d29876008fad400bca8d6b37e5d5f61dd1bcb39d)
(cherry picked from commit 2a326fdc8f8bf2bd2c5764394616100906d9db2d)
(cherry picked from commit 9b72e79e20d0d3560e0b064b8b0d75e35feb720e)
(cherry picked from commit 075b0f744363842ed4179c644d933d461389544f)
Change-Id: I654f74991830ae1fc7df7cc91d930390fb88b2a4
Reviewed-on: http://codereview.qt.nokia.com/3274
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Create a libQtPrintSupport library that contains our current
printing infrastructure. Long term this will get replaced
with a libQtPrint, as the current architecture is not
really maintainable.
Change-Id: I7362fff6786b58c5b4e9213c23eda36d15048aa2
Reviewed-on: http://codereview.qt.nokia.com/3209
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Add boundary helper functions to the QAccessibleTextInterface.
Move LineEdit over to use QTextBoundaryFinder.
Reviewed-by: Jan-Arve
(cherry picked from commit c1ec1a95806cda54d5b4e9f8ed159a611bd75964)
Change-Id: Ib93599c49110aab50debe1e3fb0073dd34071c87
Reviewed-on: http://codereview.qt.nokia.com/3025
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
When a virtual object is registered with the SubPath option
it will handle all dbus calls to itself and all child paths.
It needs to reimplement handleMessage for that purpose.
Introspection needs to be implemented manually in the introspect function.
Reviewed-by: Thiago Macieira <thiago.macieira@nokia.com>
(cherry picked from commit b07919b3de8cff3e44b7271062372b14bcda5b83)
(cherry picked from commit 997c2dfed7a04da2fac577f1c29b89bda4939e2d)
(cherry picked from commit c676b7095d826dc2d006f52a4b234546af5e2137)
Change-Id: I003007604b286af8000959756ce9d25c17306f5b
Reviewed-on: http://codereview.qt.nokia.com/3051
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This was known to be unstable on mac, but appears to be unstable on
Linux also.
Task-number: QTBUG-20987
Change-Id: I760533c32cf13d24f8428f120813eb590b202182
Reviewed-on: http://codereview.qt.nokia.com/3131
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Wait for window shown on _all_ platforms, not just X11.
QEXPECT_FAIL a test which relies on QCursor::setPos, which is currently
unimplemented for qpa (QTBUG-20753).
Change-Id: I72412476afc7e52ccb6cab4306ff791b7e7d8d93
Reviewed-on: http://codereview.qt.nokia.com/3118
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Throwing C++ exceptions through the event loop doesn't work if the Glib
event loop is used, so conditionally skip that part of the test.
Change-Id: Ic27ebf4eb75bd1cf7c7e35f371f29bcfc0e1844a
Reviewed-on: http://codereview.qt.nokia.com/2471
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This test unstably fails because font lookup is somewhat broken for qpa.
Task-number: QTBUG-20986
Change-Id: Id4ebd35e979d8837d32b58e5ed9c1df3ac15827a
Reviewed-on: http://codereview.qt.nokia.com/3130
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The necessary font handling code for qrawfont currently seems to be
unimplemented for all qpa backends.
Task-number: QTBUG-20976
Change-Id: I2b5c511936892e2754c0ee809b7a558f44d1d132
Reviewed-on: http://codereview.qt.nokia.com/3116
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
These tests were written to compare two different methods of drawing
text, to ensure the result was the same. However, if _both_ methods
turned out to be complete no-ops, the test would unexpectedly pass, as
it never verified that anything was painted. Add additional
verification steps and QEXPECT_FAIL them on qpa for now.
Task-number: QTBUG-20977
Change-Id: I1ce1b7c2bcd683fc9eeaeb8d1483268e56f5cf08
Reviewed-on: http://codereview.qt.nokia.com/3117
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The `lackey' helper app was disabled by
ccd5228a93, but the tests which depend on
it weren't disabled - so, of course, they fail.
None of these tests will work until the circular dependency is fixed
(the tests are in qtbase and they depend on qtscript which depends on
qtbase).
Change-Id: I8e41b4182f5ea57a71ec810a30a21ba1c7217db3
Reviewed-on: http://codereview.qt.nokia.com/3122
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Doing an async exit of the test event loop is unsafe - it means that
a call to exitLoop may be left pending from one testfunction, causing
future testfunctions to fail. This in fact was happening for the
multipleDifferentLookups testfunction, which was running the event loop
for two milliseconds at a time until a certain amount of lookups was
done. It was common for the loop to timeout after the lookup had
completed but before the async exitLoop had been processed.
Make it simple, do a synchronous exitLoop.
Change-Id: I2ffe6989bddc091ddd42b218a75f7a8ff160cf53
Reviewed-on: http://codereview.qt.nokia.com/3124
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest sometimes passes and sometimes fails, making its result
insignificant for the purpose of detecting regressions.
Task-number: QTBUG-20984
Change-Id: I1454649384b60501be0bec238dfb18cfc85d5f54
Reviewed-on: http://codereview.qt.nokia.com/3129
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test fails on qpa because it uses QCursor::setPos, which is
unimplemented.
Task-number: QTBUG-20753
Change-Id: I8b77261e9ddfa8f57cebdbd83c93a367a8cf8bea
Reviewed-on: http://codereview.qt.nokia.com/3128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test crashes sometimes (but not always), making its result
insignificant for the purpose of detecting regressions.
Task-number: QTBUG-20981
Change-Id: I65e9c449ef342fad17be2364964774f229970aaa
Reviewed-on: http://codereview.qt.nokia.com/3125
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test fails on qpa because QPixmap::grabWindow is not implemented
for that platform.
Task-number: QTBUG-20863
Change-Id: I19afdac231922113c1b491dee27c2ea91e121b85
Reviewed-on: http://codereview.qt.nokia.com/3123
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test will fail if the window manager doesn't give the widget the
geometry it requested. The test was verifying this precondition, but
only on QWS. It doesn't make sense to limit this check to QWS,
as other platforms can have small screens too.
Change-Id: I3fec905c28ac2f85ebfd621f84f2269a673e318e
Reviewed-on: http://codereview.qt.nokia.com/3061
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The test fails on some qpa, xcb configurations, but not others.
The difference between the passing and failing configurations is
unknown.
Task-number: QTBUG-20956
Change-Id: I0dc7c3e598ce1116ef5f2280d9285dda82f14f10
Reviewed-on: http://codereview.qt.nokia.com/3064
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
We are trying to test the case of having a widget right next to the edge
of the screen, but the window manager is likely to forbid this geometry
in many cases. When this happens, we can't continue the test.
Change-Id: I6bce2263bdf444221c5303e83d70a254bbb9194c
Reviewed-on: http://codereview.qt.nokia.com/2892
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Always verify that the application has an active window before
attempting to generate a key click.
This problem potentially affected all platforms, but is rare on non-qpa
Linux since QTest::qWaitForWindowShown would usually avoid the problem
on that platform.
Change-Id: I0c30be6228361faffa121c9c2d7a667f8351ebd6
Reviewed-on: http://codereview.qt.nokia.com/2896
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test can't work because QCursor::setPos() isn't yet implemented
for qpa.
Task-number: QTBUG-20753
Change-Id: I2da8f920bd2d4706bbbcd983e11d2cc19055d2bf
Reviewed-on: http://codereview.qt.nokia.com/2891
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
These tests cannot be written properly for qpa, due to missing API.
Task-number: QTBUG-20864
Task-number: QTBUG-20863
Change-Id: I2b311833a6738b1830c1cd8be1f20293492bebda
Reviewed-on: http://codereview.qt.nokia.com/2877
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Since the test is irrelevant for Q_WS_X11 and Q_WS_QWS, it's almost
certainly irrelevant for Q_WS_QPA too.
Change-Id: Icc563046baf4c2a5217b87dee150afc7f6fd034d
Reviewed-on: http://codereview.qt.nokia.com/2876
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
We can finally remove the hack where a copy of QXmlStream
was compiled into QtXml on some platforms.
Change-Id: Ia164caa73dfb470ac86d1b4062031093b433d10c
Reviewed-on: http://codereview.qt.nokia.com/2869
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The floating point problem which causes this test to fail is not
triggered if Qt is compiled in debug mode. Enable QEXPECT_FAIL more
narrowly.
Task-number: QTBUG-20661
Change-Id: I25f3260b516cd4fda9d8b711aa1140cbda821412
Reviewed-on: http://codereview.qt.nokia.com/2719
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
As virtually all of our tests which use the live qt-test-server, this
test is inherently unstable.
Change-Id: I27fc07a28b8dd6cd4dd3cb6414389e3cf41d0318
Reviewed-on: http://codereview.qt.nokia.com/2795
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Mark all of these autotests as `insignificant' until the underlying
crash bug is fixed.
Task-number: QTBUG-20756
Change-Id: I18fb7038dd86ef2e9a5f37c8f26d7fe76032754e
Reviewed-on: http://codereview.qt.nokia.com/2714
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The rest of this test gives unpredictable results if initTestCase fails.
Normally, a failure in initTestCase skips the rest of the test, but this
is not the case if QEXPECT_FAIL is used. Adjust the test to ensure the
rest of it is still correctly skipped.
Change-Id: I8ba76161e788f10801029ef10693e9ac275a2897
Reviewed-on: http://codereview.qt.nokia.com/2713
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test unstably fails for qpa, xcb, so mark it as insignificant.
Task-number: QTBUG-20761
Change-Id: I0b4228c2803946ef87d7d11f4167017c2ffd0ad6
Reviewed-on: http://codereview.qt.nokia.com/2658
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QBezier::pointAt() could potentially return values outside the bezier's
bounds, even when the bezier was a straight horizontal line. For
example, with y = 0.5, it would produce y=0.5 or y=0.49999999999999 for
different values of t, which when rounded cause jittering in a QML
PathView.
Task-number: QTBUG-17007
Task-number: QTBUG-18133
Cherry-pick-of: 8b66982ec7b4b5d2071931c288973dce73dc9875
Change-Id: I4ecac7b9085aaaaaaaaaaaaaaaaaaaaaa7d7b0bc
Reviewed-on: http://codereview.qt.nokia.com/2467
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This test had an invalid circular dependency: the test is in qtbase, and
it depends on lrelease in qttools, which depends on qtbase.
Change the test to skip if lrelease is not available or not working.
Change-Id: I4696f4a178a6f8c0f2e76b5c4ae7f60c4f953334
Reviewed-on: http://codereview.qt.nokia.com/2619
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
... and add a new method subjectAlternativeNames() instead. This was
a typo in the API.
Change-Id: Id8704c387c9ff8e1af2b9a524ff628f5c053a294
Reviewed-on: http://codereview.qt.nokia.com/2618
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This test had an invalid circular dependency: the test is in qtbase, and
it depends on lrelease in qttools, which depends on qtbase.
Change the test to skip if lrelease is not available or not working.
Change-Id: I964ddaf9485a2afed5a1bd4f88d9bdccadf1cfca
Reviewed-on: http://codereview.qt.nokia.com/2472
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
