It doesn't make sense to multiply by coverage when drawing to stencil.
This could theoretically work with FPs that discard and/or modify
the sample mask, but for the time being an analytic FP means one that
calculates a coverage value.
Bug: skia:7190
Change-Id: I44140a5823f8683ec08244bdf9d369f51fa05dd9
Reviewed-on: https://skia-review.googlesource.com/68362
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This reverts commit 4c92d4aa3e.
Reason for revert: Chromecast bot failure
Original change's description:
> Don't use analytic clip FPs when drawing to stencil
>
> It doesn't make sense to multiply by coverage when drawing to stencil.
> This could theoretically work with FPs that discard and/or modify
> the sample mask, but for the time being an analytic FP means one that
> calculates a coverage value.
>
> Bug: skia:7190
> Change-Id: Ic40cf6c19c377cba80bad458993582f5cc07022a
> Reviewed-on: https://skia-review.googlesource.com/67423
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
TBR=bsalomon@google.com,robertphillips@google.com,csmartdalton@google.com
Change-Id: Ie5bd4852c201e47daee0920f5644141bee2d8a46
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:7190
Reviewed-on: https://skia-review.googlesource.com/68400
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
It doesn't make sense to multiply by coverage when drawing to stencil.
This could theoretically work with FPs that discard and/or modify
the sample mask, but for the time being an analytic FP means one that
calculates a coverage value.
Bug: skia:7190
Change-Id: Ic40cf6c19c377cba80bad458993582f5cc07022a
Reviewed-on: https://skia-review.googlesource.com/67423
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
The old code used a helper object in the tessellation code that called flush() on GrAtlasTextOp.
A confusing aspect of this was that the pre-flush vertex data generated for the sub run was copied
to the op's vertex buffer after flush() had already recorded the draw that read the data.
The new code adds a tessellator nested helper class to GrAtlasTextBlob. The helper exits early if
a flush is required, the op performs the flush, and then the helper is invoked again until
tessellation is complete.
This also changes the blob object to use char* instead of unsigned char* for its vertex pointers.
Change-Id: I31bed251435f13b2172e6f5829ba437b882dd44d
Reviewed-on: https://skia-review.googlesource.com/67856
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
I was originally going to add these to help test a lowp dither, but
after looking at diffs I don't think lowp dither is a good idea.
Non-dithered lowp gradients look fine to me so far.
I'd have done conics, but they scare me.
Change-Id: I8f5e75aec726983186214845ca38cfa0d54496b3
Reviewed-on: https://skia-review.googlesource.com/66460
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Change-Id: I871dd5eea4496e87c206b46d9eae81cb521b11ce
Reviewed-on: https://skia-review.googlesource.com/65103
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This is motivated by exposing these to an upcoming atlas text rendering API that doesn't use ops.
Change-Id: Id034dd43d13bc96fe1350fc6d8f699477bb74a05
Reviewed-on: https://skia-review.googlesource.com/65060
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Defers the transformation to normalized window coordinates until after
the geometry shader. Merges vertex and a geometry shader builders into
a single compilation unit with a common base class. Updates CCPR
geometry shaders accordingly.
Bug: skia:
Change-Id: If93c90e978b1fdc7120febd05cfb05810fd496b5
Reviewed-on: https://skia-review.googlesource.com/62980
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This moves us closer to making GrAtlasTextContext and related classes usable without a GrRenderTargetContext.
Change-Id: Ife52d69a3f925e23da88043acb4d8dc9f672a025
Reviewed-on: https://skia-review.googlesource.com/63304
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: skia:
Change-Id: I0433105c4a0e064e5cc228b7f6bec1ef3c66909c
Reviewed-on: https://skia-review.googlesource.com/62744
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Decouples geometry generation and analytic coverage. This paves the
way for a vertex shader implementation.
TBR=egdaniel@google.com
Bug: skia:
Change-Id: I2a183401bfe70b9f14b9b1cf035de6020a2135fa
Reviewed-on: https://skia-review.googlesource.com/60103
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This reverts commit e501033bbd.
Reason for revert: Broke several bots
Original change's description:
> Refactor CCPR coverage shaders for a vertex impl
>
> Decouples geometry generation and analytic coverage. This paves the
> way for a vertex shader implementation.
>
> Bug: skia:
> Change-Id: I23b79d4397db22bd8fc063b8dfca58ab00037292
> Reviewed-on: https://skia-review.googlesource.com/59200
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,csmartdalton@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: skia:
Change-Id: I314bf03fa6cbeceb1c527d4d9464147b2e8464c6
Reviewed-on: https://skia-review.googlesource.com/59821
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Eric Boren <borenet@google.com>
Decouples geometry generation and analytic coverage. This paves the
way for a vertex shader implementation.
Bug: skia:
Change-Id: I23b79d4397db22bd8fc063b8dfca58ab00037292
Reviewed-on: https://skia-review.googlesource.com/59200
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
These are no longer used outside of Skia, so make them private.
Change-Id: I735bb39c10553885cc6051aebddeff150ba4caa9
Reviewed-on: https://skia-review.googlesource.com/59180
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Allows benchmarks to override GrContextOptions.
Removes the ability to use the same GrContext for all benchmarks in a config.
Change-Id: I5ab9f6e81055451ac912a66537843d1a49f3b479
Reviewed-on: https://skia-review.googlesource.com/34080
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: b/66996870
Android wants to build with warnings as errors. Keep the external/skia
warnings in sync with other Skia builds by pulling them from the json
generated by GN.
Fix a couple small errors that show up in the framework build.
Uploaded in response to AOSP's
https://android-review.googlesource.com/#/c/platform/external/skia/+/498211/
Change-Id: I4d791d43a9b00f9d6b79ecf16839716f241cba99
Reviewed-on: https://skia-review.googlesource.com/55703
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: If17cf0fc8b857d22f33a462a39a02bcddd15deda
Reviewed-on: https://skia-review.googlesource.com/55741
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
This avoids a warning-as-error:
clang-5.0: error: the object size sanitizer has no effect at -O0, but
is explicitly enabled:
Change-Id: I53a16acc3e743b42fe9c2f35919d3c09d5d601b7
Reviewed-on: https://skia-review.googlesource.com/55720
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
ANGLE bots were getting lots of corrupted GMs - we set fPreferVRAMUseOverFlushes
to false. In that case, multiple deferred proxies were instantiating to the same
scratch resource. Any proxy that we're going to fill with an ASAP upload needs
to have no pending IO - we hoist all those loads to the front of the flush, so
normal IO tracking doesn't really help.
Bug: skia:
Change-Id: Id36fd8700e522db412a3c992b93c778e2ebb1188
Reviewed-on: https://skia-review.googlesource.com/53940
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit fdd2cb52b7.
Reason for revert: ANGLE gold failures
Original change's description:
> Revert "Revert "Revert "Revert "Make threaded proxy generation MDB-friendly, and defer instantiation""""
>
> This reverts commit 9f8d4d36b5.
>
> Bug: skia:
> Change-Id: I8d7c1df24d8b13b94404f3d9ba69a1ab55ee00c0
> Reviewed-on: https://skia-review.googlesource.com/52920
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,robertphillips@google.com,brianosman@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: skia:
Change-Id: Ie461de167fbd37323cabd4adf064f99204ba4878
Reviewed-on: https://skia-review.googlesource.com/53801
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 9f8d4d36b5.
Bug: skia:
Change-Id: I8d7c1df24d8b13b94404f3d9ba69a1ab55ee00c0
Reviewed-on: https://skia-review.googlesource.com/52920
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit 837c6c7c0c.
Bug: skia:
Change-Id: I1821f1b2b772c67f1b749692b398eb757d8073c9
Reviewed-on: https://skia-review.googlesource.com/52744
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: Id2ae524f765414e4c3d990066fcd3ebcea693657
Reviewed-on: https://skia-review.googlesource.com/52781
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit 742f3d02a1.
Reason for revert: Aaah!
Original change's description:
> Make threaded proxy generation MDB-friendly, and defer instantiation
>
> Replaces GrPrepareCallback with GrDeferredProxyUploader, stored directly
> on GrTextureProxy. Op lists now store a list of referenced proxies that
> are being generated by worker threads. At flush time, iterate over those
> proxies, and invoke their uploader.
>
> Lifetime of the uploader object is now tied to the proxy, but the ASAP
> upload function will free the proxy's uploader, if it's called.
>
> Bug: skia:
> Change-Id: Ieb2c6a805d19990012839a8e103c3ca5b8d3dfc6
> Reviewed-on: https://skia-review.googlesource.com/49904
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,robertphillips@google.com,brianosman@google.com
Change-Id: I8f76a67044dc4159f903097d8b1ef19ffb48c730
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/52760
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Replaces GrPrepareCallback with GrDeferredProxyUploader, stored directly
on GrTextureProxy. Op lists now store a list of referenced proxies that
are being generated by worker threads. At flush time, iterate over those
proxies, and invoke their uploader.
Lifetime of the uploader object is now tied to the proxy, but the ASAP
upload function will free the proxy's uploader, if it's called.
Bug: skia:
Change-Id: Ieb2c6a805d19990012839a8e103c3ca5b8d3dfc6
Reviewed-on: https://skia-review.googlesource.com/49904
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Several upcoming additions should go in here
Change-Id: I642f3c7cc36b1e6512ee0170640449e88a666d2c
Reviewed-on: https://skia-review.googlesource.com/52661
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit 88757dacd4.
Reason for revert: Still seems to be failing Chromium "telemetry_perf_unittests (with patch) on Android" on android_n5x_swarming_rel.
Original change's description:
> guard old apis for querying byte-size of a bitmap/imageinfo/pixmap
>
> Now with legacy behavior for allocpixels
>
> This was reverted, so the current CL is a "fix" on top of ...
> https://skia-review.googlesource.com/c/skia/+/50980
>
> Related update to Chrome (in preparation for this change)
> https://chromium-review.googlesource.com/c/chromium/src/+/685719
>
> Bug: skia:
> Change-Id: I4b370ee7e95083ab27421f008132219c9c7b86e9
> Reviewed-on: https://skia-review.googlesource.com/51341
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=fmalita@chromium.org,reed@google.com
Change-Id: I827a0ca1d1e3909e648fde3342cdb8601d34da8d
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/52381
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit 98a6216b18.
Reason for revert: breaking the chrome roll. Looks like they may be writing data to create an image across all the row bytes and thus writing to unalloced data on the last row. Link to example failing bot:
https://build.chromium.org/p/tryserver.chromium.win/builders/win_chromium_rel_ng/builds/539960
Original change's description:
> guard old apis for querying byte-size of a bitmap/imageinfo/pixmap
>
> Previously we had size_t and uint64_t variations.
>
> The new (simpler) API always..
> - returns size_t, or 0 if the calculation overflowed
> - returns the trimmed size (does not include rowBytes padding for the last row)
>
> Bug: skia:
> Change-Id: I05173e877918327c7b207d2f7f1ab0db36892e2e
> Reviewed-on: https://skia-review.googlesource.com/50980
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Reviewed-by: Leon Scroggins <scroggo@google.com>
TBR=mtklein@google.com,herb@google.com,scroggo@google.com,fmalita@chromium.org,reed@google.com
Change-Id: I726f6ab1b36b14979ba6f37105e0a469b3f0dbc0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/51262
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Previously we had size_t and uint64_t variations.
The new (simpler) API always..
- returns size_t, or 0 if the calculation overflowed
- returns the trimmed size (does not include rowBytes padding for the last row)
Bug: skia:
Change-Id: I05173e877918327c7b207d2f7f1ab0db36892e2e
Reviewed-on: https://skia-review.googlesource.com/50980
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Reviewed-by: Leon Scroggins <scroggo@google.com>
For this to work, we need access to the "original" path,
before any style was applied. To that end, add an original
path to GrShape (and unit tests of that functionality).
Then add a version of addGenIDChangeListener to GrShape,
that propagates to the original path, and use that in
tessellating path renderer.
Includes unit tests of caching behavior in the PR, all
of which failed without this change.
Bug: skia:
Change-Id: I98bb505f521e8ff07184f5c3fbd3c5fd1a22d3d5
Reviewed-on: https://skia-review.googlesource.com/50300
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: chromium:712455
Change-Id: Ic9bb9b862abe01f112cc41d28589733460b15bc1
Reviewed-on: https://skia-review.googlesource.com/50181
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This CL will enable Android to statically link libskia into libhwui
while still exposing the symbols needed by other components of the
system.
Bug: b/31971097
Change-Id: Ib6c87331dbe456e247b46a34c38da4863dfe02f0
Reviewed-on: https://skia-review.googlesource.com/49766
Reviewed-by: Leon Scroggins <scroggo@google.com>
Commit-Queue: Derek Sollenberger <djsollen@google.com>
The GN->Android.bp script runs with target_cpu="none",
but Android needs SkJumper_generated.S. Just skip it
explicitly for WASM.
Change-Id: I07b9761c591d48198460ce6300ed3bc9fd02a487
Reviewed-on: https://skia-review.googlesource.com/49903
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Fix core.gni to use not use Assembler for none cpu.
Right now, there are no outputs because we aren't compiling
dm or nanobench. However, this still compiles the skia
library and creates two executables, so it's a good canary
for a real WASM build.
Additional note: the two executables in question don't draw
anything to the screen via GL, which is still not possible with
Skia+WASM.
Bug: skia:
Change-Id: I0d767467e94e40d01070e34223dd90e96f1c96f2
Reviewed-on: https://skia-review.googlesource.com/49540
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Eric Boren <borenet@google.com>
Bug: chromium:762167
Change-Id: Ia23f6dbfc0466aef4ca9d1a5b9ff343d79dc83bb
Reviewed-on: https://skia-review.googlesource.com/47460
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
I have text_16_AA_FF -> 8888 (forcing RP) faster than head now on my
laptop. I'm feeling confident that we can make this perform well.
After looking at performance a bit more today, it looks like everything
is within what I'd consider comparable in performance, especially on
ARM. On x86-64 it looks like big bulk blits get a little slower and
small mask blits get a little faster.
Quality looks good, and maybe improved for 565.
There are fewer platform-specific differences now in _lowp, and I think
they're few enough now that we could even consider completing the
unification by folding the 8-bit and float code together. Rename
"div255()" to "rebias()", slap on a few coats of paint...
Guarded for Chrome with SK_JUMPER_LEGACY_LOWP.
Change-Id: I36309c07cf736f3cb31952cca66030ad56026318
Reviewed-on: https://skia-review.googlesource.com/45982
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
All of the published coefficients assume math is being done on bytes, and
that 128 is the encoding of 0 (in the biased Cb and Cr values). When
sampling an A8 texture, though, GPUs typically decode as byte/255. Thus,
128 ends up slightly larger than 0.5. To fix this, just adjust the bias
terms to be scaled by 128/255, rather than 0.5.
I also changed some of the other coefficients to be higher precision,
based on the values in ITU-T T.871.
This originally surfaced as a Chromium bug where an all-black JPG decoded
to (1/255, 0, 1/255) on GPU. I've added a GM that encodes a color cube to
JPG, then draws from the encoded data. GPU and CPU (libjpeg) still
disagree in many cases, but the newer version performs much better
(diffing gl and 8888 configs):
Previously: 95.2% of pixels differ, max diff of 2, avg diff of 1
Now : 65.4% of pixels differ, max diff of 1, avg diff of 0
Bug: skia:7038 chromium:763605
Change-Id: I4801db9f6e2fc4d4109eb5e27c9499f214084d38
Reviewed-on: https://skia-review.googlesource.com/45842
Reviewed-by: Leon Scroggins <scroggo@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Also refactor the prepare callback stuff to share logic
between software path rendering and clip mask generation.
Bug: skia:
Change-Id: I0c56c6df8703eb59d2d49a4c3985bd4f5ef20f01
Reviewed-on: https://skia-review.googlesource.com/44421
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit c576e93d17.
Reason for revert: ASAN failures
Original change's description:
> Switch to the new SkSL lexer.
>
> This completely replaces flex with a new in-house lexical analyzer generator,
> which we have done for performance and memory usage reasons. Flex requires us
> to copy strings every time we need the text of a token, whereas this new lexer
> allows us to handle strings as a (non-null-terminated) pointer and length
> everywhere, eliminating most string copies.
>
> Bug: skia:
> Change-Id: I2add26efc9e20cb699520e82abcf713af3968aca
> Reviewed-on: https://skia-review.googlesource.com/39780
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
TBR=bsalomon@google.com,ethannicholas@google.com
Change-Id: If27b750a5f696d06a6bcffed12fe9f0598e084a6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/44881
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
This completely replaces flex with a new in-house lexical analyzer generator,
which we have done for performance and memory usage reasons. Flex requires us
to copy strings every time we need the text of a token, whereas this new lexer
allows us to handle strings as a (non-null-terminated) pointer and length
everywhere, eliminating most string copies.
Bug: skia:
Change-Id: I2add26efc9e20cb699520e82abcf713af3968aca
Reviewed-on: https://skia-review.googlesource.com/39780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Disable some new warning flags to get us building.
Change-Id: I10299d667b06fb61d03e52329883c634bd42f45c
Reviewed-on: https://skia-review.googlesource.com/44341
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
The main change is to make GrSamplerParams smaller by making its enums have byte-sized underlying types. The rest is cosmetic.
Change-Id: Ib71ea50612d24619a85e463826c6b8dfb9b445e3
Reviewed-on: https://skia-review.googlesource.com/43200
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Creates a GrCCPRGeometry class that chops contours up into simple
segments that ccpr can render, and rewrites the GPU buffer creation to
be able to handle arbitrary lengths of ccpr geometry.
Bug: skia:
Change-Id: Iaa173a02729e177b0ed7ef7fbb9195d349be689d
Reviewed-on: https://skia-review.googlesource.com/41963
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Change-Id: I06e6b63c2742da069f48ff5d7defafc63a485af7
Reviewed-on: https://skia-review.googlesource.com/41842
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Bug: skia:
Change-Id: Ic8b25ca2ecf51cfc190ac01bc9282396905a33b3
Reviewed-on: https://skia-review.googlesource.com/40862
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Chrome would like to perform cpu-side preprocessing for gpu draws in parallel.
They do not want to go through a picture (since they have their own display list format).
The general idea is that we add a new SkDeferredDisplayListRecorder class to
perform all of Ganesh's cpu-side preprocessing ahead of time and in parallel.
The SkDDLRecorder operates like SkPictureRecorder. The user can get an SkCanvas
from the SkDDLRecorder and feed it draw operations. Once finished, the user
calls 'detach' to get an SkDeferredDisplayList. All the work up to and
including the 'detach' call can be done in parallel and will not touch
the GPU. To actually get pixels the client must call SkSurface::draw(SkDDL)
on an SkSurface that is "compatible" with the surface characterization
initially given to the SkDDLMaker.
The surface characterization contains the minimum amount of information Ganesh needs
to know about the ultimate destination in order to perform its cpu-side work
(i.e., caps, width, height, config).
Change-Id: I75faa483ab5a6b779c8de56ea56b9d90b990f43a
Reviewed-on: https://skia-review.googlesource.com/30140
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Change-Id: Ib8f4d6c41356cf0fe2e14b7bff7713d107eaa01f
Reviewed-on: https://skia-review.googlesource.com/40687
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This adds a fallback backtracer for use on Android where <execinfo.h>
ins't present, instead using <unwind.h> to unwind and <dlfcn.h> to
lookup function names and addresses.
lockf() wasn't available until NDK API 24, so I've just no-op'd file
locking on older targets. I tried switching from lockf() to flock(),
but flock() didn't see to _do_ anything, neither on Android nor on my
Mac laptop. I think I should be able to use the lower-level fcntl()
APIs to restore file locking uniformly in a follow-up. The upshot is
until then, we'll have interlaced logs and stack traces on Android
devices unless you set ndk_api=24 in GN.
We need to add a couple build flags to make backtraces useful:
* -funwind-tables makes the call to _Unwind_Backtrace() actually
traverse the call stack. This is a small extra binary size cost.
* -rdynamic makes symbols linked into the main executable visible
to dladdr(). We do this on Linux already for the same reason.
Here's an example where I made aaxfermodes call SK_ABORT():
650 ok, 1 crashed
caught signal SIGABRT while running 'aaxfermodes'
0x76ed936288 [unknown]+308
0x76eec014e0 [unknown]+510811706592
0x76ed367b2c tgkill+8
0x76ed364f50 pthread_kill+68
0x76ed31ff5c raise+28
0x76ed318814 abort+56
0x76edebd070 sk_out_of_memory()+12
0x76ed99f664 AAXfermodesGM::draw_pass(SkCanvas*, AAXfermodesGM::DrawingPass)+96
0x76ed99f4e4 AAXfermodesGM::onDraw(SkCanvas*)+36
0x76ed9e8550 skiagm::GM::drawContent(SkCanvas*)+224
0x76ed9e82ac skiagm::GM::draw(SkCanvas*)+288
0x76ed93b10c GMStream::GMSrc::draw(SkCanvas*)+96
0x76ed937b08 SWDst::draw(Src*)+284
0x76ed936ca0 [unknown]+112
0x76ed939b4c ForkEngine::spawn(std::function<Status ()>)+88
0x76ed934d00 main+2200
0x76ed316598 __libc_init+92
0x76ed93434c [unknown]+510791992140
Change-Id: Ica4849d99a3b97f48d778f4c15a7fa36275b8133
Reviewed-on: https://skia-review.googlesource.com/40802
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit 6d13575108.
Now with guards for "errors" like this:
external/skia/src/jumper/SkJumper_stages_8bit.cpp:240:50: error:
'memcpy' called with size bigger than buffer
case 12: memcpy(&v, src, 12*sizeof(T)); break;
This code is unreachable and generally removed by Clang's optimizer
anyway... as far as I can tell the code generation diff is arbitrary.
Change-Id: I6216567caaa6166f71258bd25343a09e93892a10
Reviewed-on: https://skia-review.googlesource.com/39961
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit 08133583d5.
Reason for revert: Blocking Android Autoroller on compile error.
Original change's description:
> 8-bit jumper on armv8
>
> The GM diffs are all minor and what you'd expect.
>
> I did a quick performance sanity check, which also looks fine.
>
> $ out/ok bench rp filter:search=Modulate
> [blendmode_rect_Modulate] 30.2ms @0 32ms @95 32ms @100
> [blendmode_mask_Modulate] 12.6ms @0 12.6ms @95 14.5ms @100
> ~~~>
> [blendmode_rect_Modulate] 11.2ms @0 11.7ms @95 12.4ms @100
> [blendmode_mask_Modulate] 10.5ms @0 23.6ms @95 23.9ms @100
>
> This isn't even really the fastest we can make 8-bit go on ARMv8;
> it's actually much more natural to work de-interlaced there. Lots
> of room to follow up.
>
> Change-Id: I86b1099f6742bcb0b8b4fa153e85eaba9567cbf7
> Reviewed-on: https://skia-review.googlesource.com/39740
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Commit-Queue: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,herb@google.com,fmalita@chromium.org,reed@google.com
Change-Id: I71425d8b7fbb66be5cb50025871dd81358111da4
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/39980
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Derek Sollenberger <djsollen@google.com>
The GM diffs are all minor and what you'd expect.
I did a quick performance sanity check, which also looks fine.
$ out/ok bench rp filter:search=Modulate
[blendmode_rect_Modulate] 30.2ms @0 32ms @95 32ms @100
[blendmode_mask_Modulate] 12.6ms @0 12.6ms @95 14.5ms @100
~~~>
[blendmode_rect_Modulate] 11.2ms @0 11.7ms @95 12.4ms @100
[blendmode_mask_Modulate] 10.5ms @0 23.6ms @95 23.9ms @100
This isn't even really the fastest we can make 8-bit go on ARMv8;
it's actually much more natural to work de-interlaced there. Lots
of room to follow up.
Change-Id: I86b1099f6742bcb0b8b4fa153e85eaba9567cbf7
Reviewed-on: https://skia-review.googlesource.com/39740
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Enough ccpr-specific geometry code is in flight that it feels like it
should have its own file.
Bug: skia:
Change-Id: I99ef620a7dc35178cf774b3a4ec6159d46f401c7
Reviewed-on: https://skia-review.googlesource.com/39162
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit 20af6d12ee.
Performance regressions on Android and Flutter
Change-Id: If70edbe85aa251f298eddf18a89ba2cf56ed94fb
Reviewed-on: https://skia-review.googlesource.com/37340
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
The SkiaRenderer in chromium is going to use the overdraw canvas and
filter for measuring overdraw. Move these headers out of src/ into
include/.
Bug: chromium:704285
Change-Id: I2abb1671b73e3d26552462cf700340a7e3b874f0
Reviewed-on: https://skia-review.googlesource.com/36160
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Adds basic support for creating non-msaa pure render targets.
Bug: skia:
Change-Id: I63d2d474b86fc0ff5d8ee7757c08abbfd5e6c6ef
Reviewed-on: https://skia-review.googlesource.com/31980
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit 3fd295550f.
Reason for revert: breaking things
Original change's description:
> Add GrTextureOp and use to implement SkGpuDevice::drawImage[Rect]() when possible
>
> This op draws a texture rectangle in src over blending with no edge antialiasing. It less powerful than NonAAFillRectOp/GrPaint but has less CPU overhead.
>
> Change-Id: Ia6107bb67c1c2a83de14c665aff64b0de2750fba
> Reviewed-on: https://skia-review.googlesource.com/33802
> Commit-Queue: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=djsollen@google.com,bsalomon@google.com,robertphillips@google.com,brianosman@google.com
Change-Id: I9cdbeeac15b17d2d6b3385560ed826397c0373c6
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/36220
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This op draws a texture rectangle in src over blending with no edge antialiasing. It less powerful than NonAAFillRectOp/GrPaint but has less CPU overhead.
Change-Id: Ia6107bb67c1c2a83de14c665aff64b0de2750fba
Reviewed-on: https://skia-review.googlesource.com/33802
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This reverts commit c902ff8fc8.
Reason for revert: not gonna do this afterall.
Original change's description:
> turn exceptions on in test tools on Android
>
> This is a follow-up to https://skia-review.googlesource.com/c/34982
> which did the same for locally built test tools.
>
> Change-Id: Id97841a64521fda99cb952a1a751ffc10f636f53
> Reviewed-on: https://skia-review.googlesource.com/35162
> Commit-Queue: Mike Klein <mtklein@google.com>
> Reviewed-by: Leon Scroggins <scroggo@google.com>
TBR=mtklein@chromium.org,mtklein@google.com,herb@google.com,scroggo@google.com
Change-Id: Iae6c817d625989e3a427dbc18328477382d892bd
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/35524
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This reverts commit c667dff58d.
Reason for revert: temporary while I fix Android, Google3.
Original change's description:
> Turn on exceptions in test tools.
>
> This allows us to test things that, e.g., throw std::bad_alloc.
>
> Change-Id: I6409159b89f1d93d403b1a1f40539cf2531a8b68
> Reviewed-on: https://skia-review.googlesource.com/34982
> Reviewed-by: Herb Derby <herb@google.com>
> Commit-Queue: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,herb@google.com
Change-Id: Iafdc34c5f70f99f7df3cd0bbad65eed0828453a1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/35081
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This allows us to test things that, e.g., throw std::bad_alloc.
Change-Id: I6409159b89f1d93d403b1a1f40539cf2531a8b68
Reviewed-on: https://skia-review.googlesource.com/34982
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
BUG=chromium:745290
Change-Id: I78cabf988115598e14a7ce39faf96e3a697a1a8f
Reviewed-on: https://skia-review.googlesource.com/34382
Commit-Queue: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Do multiply (mul) and add while tracking that the
calculation does not overflow, which can be checked with
ok().
The new unit test shows a couple examples.
Author: Herb Derby <herb@google.com>
Change-Id: I7e67671d2488d67f21d47d9618736a6bae8f23c3
Reviewed-on: https://skia-review.googlesource.com/33721
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Herb Derby <herb@google.com>
Since both armv7-a-neon and 32-bit armv8-a have NEON, we can treat them
the same in Android.bp.
Bug: b/62895439
Corresponds to https://android-review.googlesource.com/c/423660/3
This change will generate the change to Android.bp described there.
Change-Id: Icae9b5b79093d6f2886da39771d4fbe901be237a
Reviewed-on: https://skia-review.googlesource.com/33000
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Leon Scroggins <scroggo@google.com>
This reverts commit 0f450acd76.
Bug: skia:
Change-Id: I97428fbbc6d82bf8b186ec5fdbf1a939c00e4126
Reviewed-on: https://skia-review.googlesource.com/32726
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 175af0d011.
Reason for revert: Chrome doesn't know about portable format specifiers. Sigh.
Original change's description:
> GrContext::dump that produces JSON formatted output
>
> Includes caps, GL strings, and extensions
>
> Bug: skia:
> Change-Id: I1e8b3dd50fb68357f9de8ca6149cf65443d027ef
> Reviewed-on: https://skia-review.googlesource.com/32340
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com
Change-Id: Ie280b25275725f0661da7541f54ed62897abb82f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/32861
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit b681a0f1b0.
Reason for revert: Seems to be messing up some MacMini & Nexus7 bots
Original change's description:
> Store discard request on the opList and remove GrDiscardOp
>
> Change-Id: Ic1f76bb91c16b23df1fe71c07a4d5ad5abf1dc26
> Reviewed-on: https://skia-review.googlesource.com/32640
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Robert Phillips <robertphillips@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com
Change-Id: I8a89fae7bb11791bd023d7444a074bb34d006fd0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/32704
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Includes caps, GL strings, and extensions
Bug: skia:
Change-Id: I1e8b3dd50fb68357f9de8ca6149cf65443d027ef
Reviewed-on: https://skia-review.googlesource.com/32340
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This is a stand-alone helper class for writing properly
structured JSON to an SkWStream. It currently solves two
problems (although this CL only uses it in one context):
1) Performance. Writing out JSON this way is about 10x
faster than using JSONCPP. For the large amounts of data
generated by the tracing system, that's a big win.
2) Makes it easy to emit structured JSON from code that's
not fully centralized. We'd like to spit out JSON that
describes a GrContext, GrGpu, GrCaps, etc... Doing that
with simple string manipulation is complex, and spreads
this logic over all those functions. Using JSONCPP adds
yet another (large) third party library dependency (that
we only build into our own tools right now).
This went through several revisions. I originally planned
it as a stateful SkString wrapper, so the user could just
build their JSON as a string. That's O(N^2), though,
because SkString grows by a (small) constant amount. Even
using a better growth strategy still means needing RAM
for all the resulting text, which is usually pointless.
This version has a constant memory cost, so writing huge
amounts of JSON to disk (tracing a long DM run can emit
100's of MBs) doesn't stress resources.
Bug: skia:
Change-Id: Ia716524b246db0f97d332da60d2ce9903069e748
Reviewed-on: https://skia-review.googlesource.com/31204
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
rm gm that appears to have been there solely for pdf, but we don't use
it for that now.
Bug: skia:
Change-Id: I3cf88db923c2445b7c95dda14da679a594117643
Reviewed-on: https://skia-review.googlesource.com/31760
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Adds support for basic Texture creation.
Bug: skia:
Change-Id: I9a3f15bef1c88054c19e952e231cad94ad69f296
Reviewed-on: https://skia-review.googlesource.com/30781
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
- Bring back some previously deleted macros and helper types.
- Automatically inject base_type information into snapshot events,
to allow simpler tracking of polymorphic object types.
- Fix JSON formatting of pointer values (they were serializing as bool).
Bug: skia:
Change-Id: Iac7803f72ce5396ffd2fbcb5a36d76745c5e3f3e
Reviewed-on: https://skia-review.googlesource.com/28220
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
By default it emulates your installed cl.exe, but the bots don't have
one. I think the fallback is 2013, which causes all sorts of pre-C++11
problems.
CQ_INCLUDE_TRYBOTS=skia.primary:Build-Win-Clang-x86_64-Release
Change-Id: I2556abe68825e58762b4172d067ba6826de5c133
Reviewed-on: https://skia-review.googlesource.com/29021
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Currently just adding support functions to go back and forth between
GrPixelConfigs and MTLPixelFormats.
Bug: skia:
Change-Id: I01a7d6877ebed87b87090ac2b920fee45dc0e856
Reviewed-on: https://skia-review.googlesource.com/29080
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This should shut up any warnings in the win toolchain headers?
Change-Id: I7d17bf6d63d56e66afffa557d0ed06bc3994200d
Reviewed-on: https://skia-review.googlesource.com/28981
Reviewed-by: Ben Wagner <bungeman@google.com>
1) Run python bin/fetch-clang-win
2) Set clang_win = "../bin/clang_win"
3) ???
4) Profit
Most changes here are to pass the right -mfoo flags to Clang
to enable advanced instruction sets, or fixed warning-as-errors.
BUG=skia:2679
Change-Id: Ieed145d35c209131c7c16fdd3ee11a3de4a1a921
Reviewed-on: https://skia-review.googlesource.com/28740
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
Bug: skia:6880
Change-Id: Ia8b94e52eec3feb5104d2351bf7a7e6f99101deb
Reviewed-on: https://skia-review.googlesource.com/26370
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This is needed since there are currently no files in the include dir, and
some of our tests that check all the public headers complain if it doesn't
exists.
Bug: skia:6896
Change-Id: I3f70293b64b5096a55d6ba0ea5f4e6ebbfd7f62b
Reviewed-on: https://skia-review.googlesource.com/28003
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Eric Boren <borenet@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Change-Id: I3e993e271cb5e26816d37c70d9ad62acce3ed84c
Reviewed-on: https://skia-review.googlesource.com/27800
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
This has been disabled for almost two years.
Bug: skia:
Change-Id: Idc1dbf2220514947d2ccd91968e6e173d44d1b86
Reviewed-on: https://skia-review.googlesource.com/27740
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
- Remove one especially chatty event, and one pointless test
- Use TRACE_FUNC everywhere, rather than manual strings
Bug: skia:
Change-Id: Icb795294009150ca9a260436738d79546a733337
Reviewed-on: https://skia-review.googlesource.com/26701
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
I was going to be clever here and only clamp when we
know the inputs are out of range, but this filter is
rare and slow enough that I think I'd rather it just
be super paranoid safe.
The test crashes without this fix and passes with it.
Change-Id: I4e17aad2b5c1e96180ce8d73b97bee746cf985c2
Reviewed-on: https://skia-review.googlesource.com/26702
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
DAA is:
1. Much simpler than AAA.
SkScan_AAAPath.cpp is about 1700 lines.
SkScan_DAAPath.cpp is about 300 lines.
The whole DAA CL is only about 800 lines.
2. Much faster than AAA for complicated paths.
The speedup applies to GL backend (including ccpr)!
Here's the frame time of 'SampleApp --slide Chart' on macbook pro:
AAA-raster: 33ms
DAA-raster: 21ms
AAA-gl: 30ms
DAA-gl: 20ms
AAA-ccpr: 18ms
DAA-ccpr: 12ms
My linux desktop doesn't have SSE3 so the speedup is smaller
(~25% for Chart). I believe that DAA is so fast that I can enable
it for any paths (AAA is not enabled by default for complicated
paths because it is slow; hence our older supersampling scan
converter is used for stroking on Chart for AAA-xxx config.)
3. The SkCoverageDelta is suitable for threaded backend with
out-of-order concurrent scan conversion as commented in the source
code. Maybe we can also just send deltas to GPU.
4. Similar to most analytic path renderers, the quality is on the best
ground-truth level, unless there are intersections within a pixel.
The intersections look good to my eyes although theoretically that
could be arbitrary far from the ground truth (see my AAA slides).
5. For simple paths, such as circle, triangle, rrect, etc., DAA is
slower than AAA. But DAA is faster than our older supersampling
scan converter in most cases. As those simple paths usually don't
constitute the bottleneck of a picture (skp or svg), I strongly
recommend use DAA.
6. DAA also heavily favors blitMask so it may work quite well with
SkRasterPipeline and SkRasterPipelineBlitter.
Finally, please check https://skia-review.googlesource.com/c/22420/
which accelerate DAA by specializing blitCoverageDeltas for
SkARGB32_Blitter and SkARGB32_Black_Blitter. It brings a little(<5%)
speedup. But I couldn't figure out how to reduce the duplicate code
so I don't intend to land it.
Bug: skia:
Change-Id: I3b7ed6a727447922e645b1acb737a506e7c09a4c
Reviewed-on: https://skia-review.googlesource.com/19666
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Our new srgb_color_filter (in gm/srgb_color_filter.cpp) is awfully
similar to the existing srgb_colorfilter (in gm/srgb.cpp).
Let's rename the new one.
Change-Id: I8c7816c377cc4342388be51632353882a1bc5241
Reviewed-on: https://skia-review.googlesource.com/26525
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit fa3ed03720.
Reason for revert: GM is failing on a lot of bots
Original change's description:
> Add GM to test SkToSRGBColorFilter
>
> Bug: skia:
> Change-Id: If342ad5503d1b427f2d04ce15b75f0f7fa2706c1
> Reviewed-on: https://skia-review.googlesource.com/26426
> Reviewed-by: Mike Klein <mtklein@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=djsollen@google.com,mtklein@google.com,brianosman@google.com
Change-Id: I92fe179ead6d115b32b3a9533b8ee0e10bb3ee43
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/26522
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Bug: skia:
Change-Id: If342ad5503d1b427f2d04ce15b75f0f7fa2706c1
Reviewed-on: https://skia-review.googlesource.com/26426
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I9f04b8ce778349218ccd55673bdd1d16a192383c
Reviewed-on: https://skia-review.googlesource.com/26422
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This was used by subclasses of GrLegacyMeshDrawOp.
Change-Id: I421589dfdc253bdf43aeac9fa9af0647c70811dd
Reviewed-on: https://skia-review.googlesource.com/25804
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is mostly dead code.
In order to make it truly dead, we need to opt drawing unpremul images
into SkRasterPipelineBlitter. They had been handled by
SkLinearBitmapPipeline, but can't be draw by SkBitmapProcLegacyShader.
Drawing unpremul images is tested by the GM all_variants_8888, which
gave us trouble last time around (serialize-8888 drew right, 8888 wrong)
but now draws fine. I think this was probably also the root of the
revert, drawing some unpremul image in Chrome's tests somewhere.
Change-Id: I453f9df44ade807316935921cbae82961e2f08aa
Reviewed-on: https://skia-review.googlesource.com/24862
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
CQ_INCLUDE_TRYBOTS=skia.primary:Test-Debian9-GCC-GCE-CPU-AVX2-x86_64-Release-SKNX_NO_SIMD
Bug: skia:
Change-Id: If6f0d0a57463bf99a66d674e65a62ce3931d0116
Reviewed-on: https://skia-review.googlesource.com/24644
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: I97af420d1c3270e24e5d0959237b8163faa9e069
Reviewed-on: https://skia-review.googlesource.com/24646
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
