This reverts commit 6bd19df9fa.
Restores original CL, but adds guards for flutter.
Bug: skia:
Change-Id: I380b4ea87d293355026d734249aa2b8c397da144
Reviewed-on: https://skia-review.googlesource.com/c/169345
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Bug: skia:
Change-Id: I723c5efdd746d6182dee0511795f7eca3b6066d3
Reviewed-on: https://skia-review.googlesource.com/c/167180
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
There were two copies of a Nima "player" and this moves them out of
samplecode/ and viewer/ to experimental/ where it is a bit more
accessible (e.g. for WebAssembly).
Bug: skia:
Change-Id: I05419a352f0d13d16b462a374578107513eb1243
Reviewed-on: https://skia-review.googlesource.com/c/166441
Commit-Queue: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
It's been driving me nuts that I can't just write `SkMatrix44 m;`,
and I often don't care whether it's initialized or not. The default
identity constructor would be nice to use, but it's deprecated.
By tagging this constructor deprecated, we're only hurting ourselves;
our big clients disable warnings about deprecated routines and use it
freely.
A quick tally in Skia shows we mostly use the uninitialized constructor,
but sometimes the identity constructor, and there is a spread of all
three in Chromium. So I've left the two explicit calls available.
I switched a bunch of calls in Skia to use the less verbose constructor
where it was clear that it didn't matter if the matrix was initialized.
Literally zero of the kUninitialized constructor calls looked important
for performance, so the only place I've kept is its lone unit test.
A few places read clearer with an explicit "identity" to read.
Change-Id: I0573cb6201f5a36f3b43070fb111f7d9af92736f
Reviewed-on: https://skia-review.googlesource.com/c/159480
Reviewed-by: Brian Osman <brianosman@google.com>
Add a skottie::Logger interface, allowing clients to register for log events
from the animation builder.
Convert existing log messages to the new machinery.
Change-Id: If9083f89b27f197bfc0d8d81860bbacb6b764be3
Reviewed-on: https://skia-review.googlesource.com/c/158580
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
In particular this allows subpixel positioning to be forced for
drawing.
Change-Id: I2c88311f075944fef66fe5ba0237804aa5755800
Reviewed-on: https://skia-review.googlesource.com/156370
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
The code generated from std::move()ing them should be fine.
Bug: skia:8355
Change-Id: I63ef650b5fbcf9fb6356006190eae5e0977ae642
Reviewed-on: https://skia-review.googlesource.com/151982
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
The default behavior is to not let the user move the slide to the top or
left. Implement for SampleSlide and stub out for NIMASlide (which isn't
so easy to implement).
Change-Id: I16074e704f4086199932d83e28c28d1ee39fbd9d
Reviewed-on: https://skia-review.googlesource.com/151600
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Allow embedders to pass a font manager.
In order to avoid excessive factory API clutter, introduce an
Animation::Builder helper to wrap factory options.
Also clean up various bits:
* hoist scene parsing out of the Animation ctor
* store the animation duration explicitly (instead of unused fps)
* plumb const SkFontMgr& internally (instead of a ref)
Change-Id: I3e180dfa85ba18c8462cfeb5a7385bef985ed6c4
Reviewed-on: https://skia-review.googlesource.com/148800
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Docs-Preview: https://skia.org/?cl=145148
Bug: skia:
Change-Id: If27722105a1e8999f6440b6fd4044cc1f327827e
Reviewed-on: https://skia-review.googlesource.com/145148
Commit-Queue: Ruiqi Mao <ruiqimao@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Bug: skia:
Change-Id: I99f938c76aa08a43bdc2e0fa2ad2bb04f103d2fb
Reviewed-on: https://skia-review.googlesource.com/146941
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Change the Subpixel positioning in Viewer from 0 to 1 to -1 to 1, with
the origin at the center of the drag area. This allows for observing
what happens when rolling over integer boundaries. Since it is no longer
simple to reset to the origin, closing the collapsing header resets the
drag point to the origin.
Change-Id: I88d4fd489c3bfb914fb843fa261d4097fef3671a
Reviewed-on: https://skia-review.googlesource.com/146643
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Ben Wagner <bungeman@google.com>
This adds onResize to sk_app::Window::Layer and uses it to resize
samples in Viewer.
Change-Id: Ia5ec5cf6dc74fbdf712291b9ba8707b076cb625d
Reviewed-on: https://skia-review.googlesource.com/146642
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
What is left of the SkView system is used only by samples or viewer.
As a result, move it out of the Skia source tree and re-organize so it
is a bit easier to understand and use more shared code.
Move samplecode/ClockFaceView.cpp to samplecode/SampleTextEffects.cpp,
sice that's what's actually in it.
Move SkAnimTimer.h to tools/timer, since it's actually shared between gm
and samples.
Change-Id: I55dafd94c64e4f930ddbd19168e0f812af86c455
Reviewed-on: https://skia-review.googlesource.com/146161
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
- plumb a RenderContext RenderNode::render() argument to track pending
opacity
- defer opacity application until we can determine whether a layer is
required (group with multiple children) or the opacity can be pushed
onto the draw paint (for single/atomic draws)
Bug: skia:
Change-Id: I962ba08bad780395d5d738307bde986e9efa502b
Reviewed-on: https://skia-review.googlesource.com/146445
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
push -> push_back
add some aliases to match std::vector: count, reserve, ...
Bug: skia:
Change-Id: I1921c31d0d6e5ed3d622a0def6054c697be2d02f
Reviewed-on: https://skia-review.googlesource.com/145884
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Adds pinch-zoom and swipe to change slides.
Bug: skia:
Change-Id: I0860c933208c8cf83027675a9de11b3f782de8e3
Reviewed-on: https://skia-review.googlesource.com/142898
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
After the last update to ImGui, windows delayed visibility for one
frame, to get properly sized. We would detect that no windows were
"active" (really, visible) and not re-paint, so we never got the second
frame when the window finally showed up.
Omar put a fix to the stats in ImGui for this, so that Active windows
are tracked separately from Visible. This pulls that change in, and
updates the test to correctly redraw when the GUI requires it.
Change-Id: Iaa61f11fcc226917e3e2b31039055a7fa1961e45
Reviewed-on: https://skia-review.googlesource.com/145361
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Bailing out early caused controls to flicker on/off if one was being
interacted with. No need to rebuild the window (paramsChanged), the GUI
is up, so we're already repainting.
Change-Id: I0751271962075dff22b19f60f4d1dc81c9232f58
Reviewed-on: https://skia-review.googlesource.com/145335
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Still need to connect this to ImGui, but this is already useful
Bug: skia:
Change-Id: I925c7a9d6236cb2d865d45d6a68a5709bf2e3df7
Reviewed-on: https://skia-review.googlesource.com/143158
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
It is unused, is becoming a maintainence burden and source of bugs,
and takes up a lot of time on the *SAN bots.
Change-Id: If383eb6e4838ca23140f9e16d518b1bfc655fa12
Reviewed-on: https://skia-review.googlesource.com/143307
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Bug: skia:
Change-Id: I30fed2c0587f36aeccd5e366b823a8b044a371ea
Reviewed-on: https://skia-review.googlesource.com/142164
Commit-Queue: Ruiqi Mao <ruiqimao@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:8136
Change-Id: I18c4ad549c52346ebfe23d172597d5da205e5c4d
Reviewed-on: https://skia-review.googlesource.com/142105
Commit-Queue: Eric Boren <borenet@google.com>
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
This removes a confusing pair of radio buttons that were always in sync
Change-Id: I9bb2d4b944c1bba67f29f71e51c070c20b10d0ef
Reviewed-on: https://skia-review.googlesource.com/140242
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
SkVertices can now be "volatile", meaning they should not be cached.
SkVertices is volatile by default if the argument is not given.
Pulled from reverted CL: https://skia-review.googlesource.com/c/skia/+/138596
Docs-Preview: https://skia.org/?cl=139545
Bug: skia:
Change-Id: I92cf832efe1c0aaa8f432eedde2678582dd2454e
Reviewed-on: https://skia-review.googlesource.com/139545
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Ruiqi Mao <ruiqimao@google.com>
added caching of SkVertices
Docs-Preview: https://skia.org/?cl=138596
Bug: skia:
Change-Id: Ia750f55f5f6d0de250d9e9c5619f4d1ac856f9f5
Reviewed-on: https://skia-review.googlesource.com/138596
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Ruiqi Mao <ruiqimao@google.com>
SkCanvas::drawVertices now supports overloads that take an array of bone deformation matrices.
SkVertices::MakeCopy and SkVertices::Builder now support two additional optional attributes, boneIndices and boneWeights.
Bug: skia:
Change-Id: I30a3b11691e7cdb13924907cc1401ff86d127aea
Reviewed-on: https://skia-review.googlesource.com/137221
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Ruiqi Mao <ruiqimao@google.com>
He's been steadily adding features and fixing bugs, figured it was time
to fetch a new version.
Change-Id: I496aefc0a1b60c3be5c89a0e58dc64811fccc77e
Reviewed-on: https://skia-review.googlesource.com/138591
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This adds a two dimensional location dragger to drag the origin across a
pixel. Also makes the perspective dragger hidden when perspective is
off. Also adds 'Z' to toggle the zoom window mouse follow.
Change-Id: Ic75d16c95848b392608770c8ed0d4db23733242f
Reviewed-on: https://skia-review.googlesource.com/137701
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Use std::swap instead. It does not appear that any external user
specializes SkTSwap, but some may still use it. This removes all use in
Skia so that SkTSwap can later be removed in a smaller CL. After that
the <utility> include can be removed from SkTypes.h.
Change-Id: If03d4ee07dbecda961aa9f0dc34d171ef5168753
Reviewed-on: https://skia-review.googlesource.com/135578
Reviewed-by: Hal Canary <halcanary@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This reverts commit 2a2f675926.
Reason for revert: this appears to be what is holding up the Chrome roll.
Original change's description:
> SkTypes: extract SkTo
>
> Change-Id: I8de790d5013db2105ad885fa2683303d7c250b09
> Reviewed-on: https://skia-review.googlesource.com/133620
> Reviewed-by: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,halcanary@google.com
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Change-Id: Iafd738aedfb679a23c061a51afe4b98a8d4cdfae
Reviewed-on: https://skia-review.googlesource.com/134504
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
In some cases issues only happen when the actual requested text size on
a paint is a particular size. Allow overriding the text size on the
paint for such testing.
Change-Id: Ic719ea36ba9d624725d443cbd563283628606f2d
Reviewed-on: https://skia-review.googlesource.com/133446
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
* relocate all SkSG-related files under modules/sksg/
* fix various tidbits to make non-sksg builds possible
* drop obsolete SampleSGInval.cpp
Change-Id: I54e6c5bb1a09f45030fa8d607b3eb3f7cba78957
Reviewed-on: https://skia-review.googlesource.com/130025
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Mike Klein <mtklein@google.com>
For GMs that draw content outside the window, this ensures that fake
and real perspective look more similar.
Change-Id: I5fd2372a21a0b6c04cb33ddef4ff53aebda1c43d
Reviewed-on: https://skia-review.googlesource.com/129454
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Moves getCaps() from GrContext to GrContextPriv and removes unused refCaps().
Change-Id: Ic6a8951b656c0d1b2773eae73bff8e88af819866
Reviewed-on: https://skia-review.googlesource.com/127389
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Originally a change to add just one more, turned into adding all of
them.
Change-Id: Ibd6b6cab75d5a018744661038cfccdb50470c234
Reviewed-on: https://skia-review.googlesource.com/127134
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Pass --file/-f to open a single file for viewing.
Change-Id: Ida168765ed6a5c7d76df1a8298bfe658d39d0196
Reviewed-on: https://skia-review.googlesource.com/126761
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
The reason we push Json updates for every frame is to support the
Android FPS meter - which happens to require the native FPS meter for
updates.
Instead of supporting two meters:
1) scale up the native FPS widget on Android (1.5x)
2) remove the Android widget
3) stop calling updateUIState() from onPaint()
Change-Id: Ica8109869035b2f885743a7e38b50688b69fa5e4
Reviewed-on: https://skia-review.googlesource.com/126621
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
It turns out the ImGui sliders don't use the format string just for
display but also to modify the potential values. Change the format
string for rotation to three decimal places to match zoom.
Change-Id: I5f8d675a18687d67c2f19b03aa4c19c3ae094415
Reviewed-on: https://skia-review.googlesource.com/125960
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Ben Wagner <bungeman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Make Skottie truly optional (own flag), and disable in framework builds
(to unblock landing the RapidJson refactoring).
Change-Id: I4611f915e43fe11c1f6754ab4a9f63e45af2f8d3
Reviewed-on: https://skia-review.googlesource.com/125872
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Mike Klein <mtklein@google.com>
Real perspective draws content with perspective applied. Fake
perspective rasterizes in ortho, then stretches the image by the
perspective matrix.
Change-Id: I738cd379f9a58b965469ef8a57fb2dfd597fda10
Reviewed-on: https://skia-review.googlesource.com/125442
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Change-Id: I0b296bf5b80adc19758a3dc99160be9d2ed05680
Reviewed-on: https://skia-review.googlesource.com/125160
Commit-Queue: Herb Derby <herb@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Auto-Submit: Herb Derby <herb@google.com>
This causes rotation to happen in the perspective plane, which is
more (?) interesting/useful.
Change-Id: If57a81de6662591be67cb68f0278f71038ac8d40
Reviewed-on: https://skia-review.googlesource.com/124160
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: I312d5b3e6b7f37a3a7bfd5561bcdb31b43e207b8
Reviewed-on: https://skia-review.googlesource.com/123934
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
This adds sliders for Zoom and Rotate.
Change-Id: Ie568e5381d76bd5a457760e2d6224e42e64c7f16
Reviewed-on: https://skia-review.googlesource.com/123027
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
A recent change added the "Paint" section to the viewer tools window. The
code around forcing the slide picker open when the backspace key was
pressed was inadvertantly separated from the slide picker section, so
now the paint section is confusingly held open instead. This changes the
logic so that the slide picker is once again the target of backspace.
Change-Id: Ibfcb78bb0a1e2bdbb2ccce54b38e8206e0303753
Reviewed-on: https://skia-review.googlesource.com/122949
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Overriding bits of the paint was added with keyboard bindings but
without being reflected in the GUI. This adds these flags to the GUI.
Change-Id: I633801fb776248952afe7cbe8857676ef8b57135
Reviewed-on: https://skia-review.googlesource.com/121796
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Handle all external slides (.skp, .jpg, .json, .svg) consistently:
* support both single-file/directory flags
* add "directory" slides for all types
Change-Id: I4881c51f597ed4cb2a5b4c61706a168c754a5a8f
Reviewed-on: https://skia-review.googlesource.com/119020
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Previously, the trans limit assumes that only touch gesture can
change the zoom level. That's not true on desktops so we need this
fix. Otherwise, we won't be able to translate when we zoomed in.
Bug: skia:
Change-Id: I5901600a0044639a47514ab76b7e1914f04137a2
Reviewed-on: https://skia-review.googlesource.com/116987
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
SkCanvas::drawPicture may provide nullptr for a paint.
BUG=skia:7756
Change-Id: I46651f7e8f0d859a7e75206d93ed1f3b3c0a4bac
Reviewed-on: https://skia-review.googlesource.com/116902
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Change-Id: I17a695c64be0e2081ad4937b23038b7ce88ae293
Reviewed-on: https://skia-review.googlesource.com/115988
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Hal Canary <halcanary@google.com>
Extend composition layers to support referencing external .json
animations ("$"<PATH> syntax).
This is a custom extension (not supported in BM/Lottie).
Also make skottie::Animation ref-counted, to facilitate sharing.
TBR=
Change-Id: I062d031e5868d759f3930dea9b261f9b3ec81684
Reviewed-on: https://skia-review.googlesource.com/109806
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Florin Malita <fmalita@chromium.org>
We want to togle inval display on click, but if we always consume the
event we disable pan/zoom in viewer.
TBR=
Change-Id: I1f785883252c4f4a09fd35d4a05485849bf7e8ef
Reviewed-on: https://skia-review.googlesource.com/109084
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Florin Malita <fmalita@chromium.org>
This moves DMFontMgr and several related files which are tightly related
to fonts into tools/fonts, moves some flags around to prevent
duplication, and adds the nativeFonts handling to Viewer.
Change-Id: Id1bdad708a6b74319ac5ac9adfe21025db4ca0b2
Reviewed-on: https://skia-review.googlesource.com/108904
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Bug: skia:
Change-Id: If8d2f46b8f27fefc3a0f983eb649654e0fb4afcb
Reviewed-on: https://skia-review.googlesource.com/108685
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Add an animated "focus" mode for SlideDir.
Clicking a cell focuses. SPACE unfocuses.
When a slide is focused, mouse and key events are passed through.
TBR=
Change-Id: Iec47e2327e3b21bd626846bb0d3f9107bf680b1b
Reviewed-on: https://skia-review.googlesource.com/108101
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Mike Reed <reed@google.com>
This is a generalization of "skottie-dir", based on SkSG and operating
at the Slide API level.
For now it is only instantiated for Json slides, but could be used for
other slide "directories" in the future.
TBR=
NOTRY=true
Change-Id: If12429084bddeb172b234344f23eabcdadedcceb
Reviewed-on: https://skia-review.googlesource.com/108002
Commit-Queue: Florin Malita <fmalita@chromium.org>
Reviewed-by: Florin Malita <fmalita@chromium.org>
This combines the AAA and DAA settings into one Antialias setting which
also exposes alias and normal settings. It also fixes restoring the AAA
and DAA global state when not overriding.
This adds hinting, subpixel positioning, and subpixel rendering
tri-state toggles as well.
Change-Id: I845fa5be1fed4142e82796e6ef417b276fa76111
Reviewed-on: https://skia-review.googlesource.com/106761
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
There isn't much Slide can do with Window-space mouse events.
Change-Id: I36509d4aa1b2ed510b8d8739d39cf5204ad486cc
Reviewed-on: https://skia-review.googlesource.com/102149
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
This reverts commit 3a2cc2c2ec.
Fix code with samplecnt=0 that slipped in between trybots/CQ and landing of previous version
Change-Id: Iab19f2e8d1e9901601c8c76244d7a88c5d707fab
Reviewed-on: https://skia-review.googlesource.com/103181
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 5bb82cbecd.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Revert "Revert "Revert "Revert "Redefine the meaning of sample counts in GPU backend.""""
>
> This reverts commit 18c52a7b52.
>
> Also relands "More sample count cleanup:" and "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
>
>
> Bug: skia:
> Change-Id: I4028105a3a1f16ce3944e134619eb6245af6b947
> Reviewed-on: https://skia-review.googlesource.com/102940
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: Idee23be2f1719f0bdc9305043e95a2d589bee8d1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/103220
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 18c52a7b52.
Also relands "More sample count cleanup:" and "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
Bug: skia:
Change-Id: I4028105a3a1f16ce3944e134619eb6245af6b947
Reviewed-on: https://skia-review.googlesource.com/102940
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit d0d7270fcc.
Revert "More sample count cleanup:"
This reverts commit d653cac70e.
Revert "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
This reverts commit 85ae7159c9.
Need to understand NVPR perf changes before relanding
Change-Id: I0db075fb42438ef2a1f9885df184dce52892ac4b
Reviewed-on: https://skia-review.googlesource.com/102780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Fixes gpu config default samples to be 1 and updates config parsing test accordingly.
This reverts commit c1ce2f7966.
Bug: skia:
Change-Id: I456973b1f52ced85a2011ea10fc49449bfc5846f
Reviewed-on: https://skia-review.googlesource.com/102147
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 48825b11ad.
Reason for revert: nanobench
Original change's description:
> Redefine the meaning of sample counts in GPU backend.
>
> Old: 0 -> nonMSAA
> 1+ -> MSAA
>
> New:
> 0 -> error/unsupported
> 1 -> nonMSAA
> 2+ -> MSAA
>
> We still allow 0 to mean nonMSAA in three sets of public APIs for backwards compatibility:
>
> 1) SkSurface factories
> 2) GrBackendRenderTarget constructors
> 3) GrCaps::getSampleCnt()'s requestedCount parameter
>
> However, we immediately clamp to 1 and treat 0 as invalid/non-renderable internally.
>
> This also changes the behavior when using a large sample count. We now fail in that case rather than using the largest sample available sample count. GrCaps::getSampleCount() will return 0 in this case.
>
>
> Bug: skia:
> Change-Id: Ida22c6b22c1365e563c9046b611e88bf5eb3ff33
> Reviewed-on: https://skia-review.googlesource.com/101560
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: Ic257619a8a5ee9ac15419ecf10259e42daed7f82
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/102662
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Old: 0 -> nonMSAA
1+ -> MSAA
New:
0 -> error/unsupported
1 -> nonMSAA
2+ -> MSAA
We still allow 0 to mean nonMSAA in three sets of public APIs for backwards compatibility:
1) SkSurface factories
2) GrBackendRenderTarget constructors
3) GrCaps::getSampleCnt()'s requestedCount parameter
However, we immediately clamp to 1 and treat 0 as invalid/non-renderable internally.
This also changes the behavior when using a large sample count. We now fail in that case rather than using the largest sample available sample count. GrCaps::getSampleCount() will return 0 in this case.
Bug: skia:
Change-Id: Ida22c6b22c1365e563c9046b611e88bf5eb3ff33
Reviewed-on: https://skia-review.googlesource.com/101560
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Use the new node type for SkottieSlide2 labels.
TBR=
Change-Id: Icd6a4faf1c281bd83a2331c0072d1a6ed71acc09
Reviewed-on: https://skia-review.googlesource.com/102441
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Florin Malita <fmalita@chromium.org>
When we start up Viewer with a SampleSlide as the first slide, nothing
gets rendered because SampleSlide depends on the backend being
initialized before setting its dimensions. This pushes the first slide's
initialization after the backend creation.
Change-Id: I8f83fe7b3973c40234104f1a83c0a60750694311
Reviewed-on: https://skia-review.googlesource.com/98161
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Bug: skia:
Change-Id: Ibe5ffee64fe9fccd6b8d86c1310a78d2d51e424e
Reviewed-on: https://skia-review.googlesource.com/97065
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Split the slide switching logic (including load/unload) into
setCurrentSlide(), while keeping setupCurrentSlide() to deal with config
only.
Change-Id: I5bd2363ffd401c1b756217f845d4dbd16d6be5d6
Reviewed-on: https://skia-review.googlesource.com/94864
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Currently Viewer fires unbalanced load events on backend change.
Instead of calling setupCurrentSlide() with an invalid prevSlide and
always forcing a slide load, pass a |force| argument on backend change.
Change-Id: I146b42331f5aa9721d4f407b81c13f4512d67d61
Reviewed-on: https://skia-review.googlesource.com/94960
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Shows a directory of skotties in a grid
Bug: skia:
Change-Id: I96b0700d8809c94a394cf517222123967afb20dc
Reviewed-on: https://skia-review.googlesource.com/91407
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Change-Id: I417fb9b6d6b7c95884dff6871731883fe3736437
Reviewed-on: https://skia-review.googlesource.com/91460
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Animations have explicit bounds. Updated Viewer to map the animation
to its full viewport.
TBR=
Change-Id: I5a016cace8ae97e9b4f0b93261fcfb4993ea2307
Reviewed-on: https://skia-review.googlesource.com/90263
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Coarse workflow:
* Construction
1) build a Json tree
2) collect asset IDs (for preComp/image layer resolution)
3) "attach" pass
- traverse the Json tree
- build an SkSG dom, one fragment at a time
- attach "animator" objects to the dom, for each animated prop
4) done, we can throw away the Json tree
* For each animation tick
1) iterate over active animators and poke their respective dom nodes/attributes
2) revalidate the SkSG dom
3) draw the SkSG dom
Note: post construction, things are super-simple - we just poke SkSG DOM attributes
with interpolated values, and everything else is handled by SkSG (invalidation,
revalidation, render).
Change-Id: I96a02be7eb4fb4cb3831f59bf2b3908ea190c0dd
Reviewed-on: https://skia-review.googlesource.com/89420
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Bug: skia:
Change-Id: Idc74e6c7e50f8d416d716ee666b37b52792c7c4b
Reviewed-on: https://skia-review.googlesource.com/87789
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I3ca5c8c7047309983018339ec7b71b9aea5ee786
Reviewed-on: https://skia-review.googlesource.com/86921
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I38736c5d49e3b281c2d23af3908575274ff97b5c
Reviewed-on: https://skia-review.googlesource.com/86282
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Bug: skia:
Change-Id: I7b20db66a7eb5b549997fd4307e41937a8753921
Reviewed-on: https://skia-review.googlesource.com/86020
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Viewer still has plenty of code that uses ImGui to create application
specific UI, but the structural code that forwards input to ImGui, and
converts per-frame ImGui rendering data to Skia draw commands is now in
a single component that can be reused in any sk_app-based application.
Bug: skia:
Change-Id: Ic14ece659d4af8ee13b69c638bdaf7df6c24f5c0
Reviewed-on: https://skia-review.googlesource.com/82627
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
This also makes it possible to manage other parts of viewer, etc (like
the stats screen, command set, even samples) as additional layers in the
stack. For now, it just removes a lot of boilerplate.
Bug: skia:
Change-Id: Ic2f80690fc76c683b3736287dc2b738c50d38614
Reviewed-on: https://skia-review.googlesource.com/82688
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Should make it easier to ask just for images.
Change-Id: If821743dc924c4bfbc6b2b2d29b14affde7b3afd
Reviewed-on: https://skia-review.googlesource.com/82684
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Bug: skia:
Change-Id: I0fc4f15abc44ff0a1b6b92e238e7abda35e7bacb
Reviewed-on: https://skia-review.googlesource.com/79904
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: Iea3794ce8710c84f2529b78b21655f2bf6aaa90e
Reviewed-on: https://skia-review.googlesource.com/79160
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I41480aa89dfcd8cb7e016e477cbabe354f35ce8a
Reviewed-on: https://skia-review.googlesource.com/75480
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
All of this is dead when not using the old SkWindow framework.
TBR=reed@google.com
Bug: skia:
Change-Id: I0f6ab18987a98469bfd367d5bc10967300dfd3ca
Reviewed-on: https://skia-review.googlesource.com/75384
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: Ibf672921f8a05705e7262aad0b1f3f1e6fc0ef9c
Reviewed-on: https://skia-review.googlesource.com/75382
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Bug: skia:7332
Change-Id: I3a7d5cf20c75bb288d5aa0fa9046e77a669aad64
Reviewed-on: https://skia-review.googlesource.com/74560
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
There is still a large amount of views code that could be trimmed down,
but which is used to implement samples (in viewer). Seemed simpler to
remove some of this code in pieces.
Bug: skia:
Change-Id: Ia3415060d03c8de604a154e3dc38379b754daab6
Reviewed-on: https://skia-review.googlesource.com/72801
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Bug: skia:
Change-Id: I8107358e49ef20bf26ddf6a6dbb21efc07f167e7
Reviewed-on: https://skia-review.googlesource.com/71460
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Made a more general mechanism for getting a canvas callback during GUI
rendering, clipped to a region. Use that to implement the zoom window.
The new version has better zoom control (I think), avoids bugs with
clamped image drawing stretching off-canvas, adds a highlight of the
pixel under the cursor, and also prints the RGBA values of that pixel.
Bug: skia:
Change-Id: I2c4da581648e7923c2a6fb28846dfdb52bdd3029
Reviewed-on: https://skia-review.googlesource.com/70723
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: I95dbb681a930f06103ecf1d8b213bb9c0915d2d6
Reviewed-on: https://skia-review.googlesource.com/69660
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Used this to test out some theories for different color correction
approaches.
Bug: skia:
Change-Id: I072130733eaea736c9aa129af74887b028f035b4
Reviewed-on: https://skia-review.googlesource.com/69221
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Interaction is much nicer (the bulleted list of text had dead space
between entries, so mouse clicks could go unnoticed). This version also
keeps the currently active slide highlighted in the list, which is nice.
Bug: skia:
Change-Id: I609d90f3b1ff99765f0a7f1ca43e02a0a534dc4d
Reviewed-on: https://skia-review.googlesource.com/68780
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The GUI uses drawVertices, in a way that doesn't currently
work with the raster backend. Even if it worked, drawVertices
is fairly slow in raster mode, but extremely fast on GPU.
This makes the GUI always usable. The tradeoff is profiling
raster will be less accurate.
Bug: skia:
Change-Id: I69df777fc5be79f5bdd8d4505f6419bfa758c97e
Reviewed-on: https://skia-review.googlesource.com/68541
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: I6303209d3ff597611ac1a5f558294c6d6fcba670
Reviewed-on: https://skia-review.googlesource.com/67766
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Bug: skia:6830
Change-Id: I1a6bb781465a29cec4946462e234d63c48693454
Reviewed-on: https://skia-review.googlesource.com/66543
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Adds the flag and a disables caching on the CCPR bots.
Bug: skia:
Change-Id: Icb85e77f89634dda1d419dacac5b8a93340723f0
Reviewed-on: https://skia-review.googlesource.com/59740
Reviewed-by: Eric Boren <borenet@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Also adds a presubmit to prevent adding trailing whitespace to source
code in the future.
Change-Id: I41a4df81487f6f00aa19b188f0cac6a3377efde6
Reviewed-on: https://skia-review.googlesource.com/57380
Reviewed-by: Ravi Mistry <rmistry@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Bug: skia:
Change-Id: Ic8b25ca2ecf51cfc190ac01bc9282396905a33b3
Reviewed-on: https://skia-review.googlesource.com/40862
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Bug: skia:
Change-Id: I35bc08ad72fb94d8e47fe342d314c4496b954226
Reviewed-on: https://skia-review.googlesource.com/40881
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Re-land of: https://skia-review.googlesource.com/36560
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: Idb92f385590749f41328a9aec65b2a93f4775079
Reviewed-on: https://skia-review.googlesource.com/40775
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This (plus SW) ensures that we can always draw any path. Changed the path
renderer command line flags so that 'default' means everything but CCPR,
and 'All' really means 'every path renderer'.
Bug: skia:
Change-Id: I2801d1c50ab939f23efb4600e0f90e6add2891b7
Reviewed-on: https://skia-review.googlesource.com/40221
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This was created by looking at warnings produced by clang's
-Wzero-as-null-pointer-constant. This updates most issues in
Skia code. However, there are places where GL and Vulkan want
pointer values which are explicitly 0, external headers which
use NULL directly, and possibly more uses in un-compiled
sources (for other platforms).
Change-Id: Id22fbac04d5c53497a53d734f0896b4f06fe8345
Reviewed-on: https://skia-review.googlesource.com/39521
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This reverts commit 76323bc061.
Reason for revert: Breaking NUC bots in threaded gm comparison:
https://chromium-swarm.appspot.com/task?id=382e589753187f10&refresh=10
Original change's description:
> Threaded generation of software paths
>
> All information needed by the thread is captured by the prepare
> callback object, the lambda captures a pointer to that, and does the
> mask render. Once it's done, it signals the semaphore (also owned by the
> callback). The callback defers the semaphore wait even longer (into the
> ASAP upload), so the odds of waiting for the thread are REALLY low.
>
> Also did a bunch of cleanup along the way, and put in some trace markers
> so we can monitor how well this is working.
>
> Traces of a GM that includes GPU and SW path rendering (path-reverse):
>
> Original:
> https://screenshot.googleplex.com/f5BG3901tQg.png
> Threaded, with wait in the callback (notice pre flush callback blocking):
> https://screenshot.googleplex.com/htOSZFE2s04.png
> Current version, with wait deferred to ASAP upload function:
> https://screenshot.googleplex.com/GHjD0U3C34q.png
>
> Bug: skia:
> Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
> Reviewed-on: https://skia-review.googlesource.com/36560
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,mtklein@google.com,bsalomon@google.com,robertphillips@google.com,brianosman@google.com
Change-Id: Icac0918a3771859f671b69ae07ae0fedd3ebb3db
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/38560
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
All information needed by the thread is captured by the prepare
callback object, the lambda captures a pointer to that, and does the
mask render. Once it's done, it signals the semaphore (also owned by the
callback). The callback defers the semaphore wait even longer (into the
ASAP upload), so the odds of waiting for the thread are REALLY low.
Also did a bunch of cleanup along the way, and put in some trace markers
so we can monitor how well this is working.
Traces of a GM that includes GPU and SW path rendering (path-reverse):
Original:
https://screenshot.googleplex.com/f5BG3901tQg.png
Threaded, with wait in the callback (notice pre flush callback blocking):
https://screenshot.googleplex.com/htOSZFE2s04.png
Current version, with wait deferred to ASAP upload function:
https://screenshot.googleplex.com/GHjD0U3C34q.png
Bug: skia:
Change-Id: I3d5a230bbd68eb35e1f0574b308485c691435790
Reviewed-on: https://skia-review.googlesource.com/36560
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Change-Id: I97a844b2f289d2518f60a64f94d60551c4530dd4
Reviewed-on: https://skia-review.googlesource.com/35742
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
1) Run python bin/fetch-clang-win
2) Set clang_win = "../bin/clang_win"
3) ???
4) Profit
Most changes here are to pass the right -mfoo flags to Clang
to enable advanced instruction sets, or fixed warning-as-errors.
BUG=skia:2679
Change-Id: Ieed145d35c209131c7c16fdd3ee11a3de4a1a921
Reviewed-on: https://skia-review.googlesource.com/28740
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
If the value or option is empty (as was for kInstancedRenderingStateName),
our Android Java application will throw exception and skip the remaining
state objects. That would result in missing "Softkeys" and "FPS" for Raster
backend in Android Viewer app.
Bug: skia:
Change-Id: I6f600bbb94509ca5389eac2d681304a00427ecdb
Reviewed-on: https://skia-review.googlesource.com/26527
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Yuqian Li <liyuqian@google.com>
Bug: skia:
Change-Id: I401c5a9885c348aa424ab07b094acecddb209490
Reviewed-on: https://skia-review.googlesource.com/25860
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Not yet thread safe (so it forces threading off).
Builds JSON on the fly, so overhead is certainly bad.
Plan to fix all of that, but this at least "works".
There is now one tracing flag: 'trace'.
- 'debugf' installs the SkDebugf tracer.
- 'atrace' installs the Android ATrace tracer.
- Any other value is interpreted as a filename, and
produces a JSON file for chrome://tracing.
All three modes work in DM, nanobench, and Viewer.
Bug: skia:
Change-Id: I3fbc22382b99418a508c670be2770195c0a1c364
Reviewed-on: https://skia-review.googlesource.com/24781
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Initial implementation of a GPU path renderer that draws antialiased
paths by counting coverage in an offscreen buffer.
Initially disabled until it has had time to soak.
Bug: skia:
Change-Id: I003d8cfdf8dc62641581b5ea2dc4f0aa00108df6
Reviewed-on: https://skia-review.googlesource.com/21541
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
On at least one machine, I've seen SetPixelFormat fail after Vulkan was
used to render to a window, preventing us from creating a GL context.
This is ham-fisted, but solves the problem.
Bug: skia:
Change-Id: I76d0cb26e181304846aa06109c1af768f8363a18
Reviewed-on: https://skia-review.googlesource.com/22740
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I49417789ab43734a1cbb4010281482970579971d
Reviewed-on: https://skia-review.googlesource.com/20505
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This does push some additional work (& includes) into the .cpp files.
Change-Id: I27c847e371802270d13594dcc22aae44039990bb
Reviewed-on: https://skia-review.googlesource.com/19660
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Had to add some logic to avoid touch and mouse cross-talk, because
(at least on my laptop), the touch screen generates both kinds of
events.
This seems really useful [1] for the many [2] Skia developers with
touch-enabled Windows devices.
----------
1: No, not really.
2: N = 1?
Bug: skia:
Change-Id: Ib888bf4198f2cc0a29a31581ec4b64d3d9008c33
Reviewed-on: https://skia-review.googlesource.com/18920
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The content rect was always identical to the window rect,
so most of the related code did nothing. The translation
limit code is always useful (to avoid dragging the slide
way off-screen with the mouse), so always include it.
The auto-scaling to fit the screen is also still useful,
but just base it on the window rect.
The zoom code has four state variables, only used two of
them, and one was a trivially derived computation. Fold
most of that work into computeMatrix. (The translation
was always zero -- we never changed the zoom center.)
Include fDefaultMatrix in the matrix from computeMatrix,
rather than needing to apply it specially to the canvas.
Don't apply the inverse default matrix to touch or mouse
points. The absolute positions of those touch points is
not important, but because that matrix includes scale
(and sometimes very large or very small scale), it just
had the effect of greatly amplifying or damping the drag
speed. Without it, the slide always pans at the speed of
the touch/mouse drag -- which seems more desirable.
The use of the inverse default matrix was a clever trick,
but it caused the translation (applied to the global mtx)
to be scaled, so the slide was always pinned incorrectly.
Instead, supply the unmodified window rect and the default
matrix, so the trans limit code can do the obvious correct
thing: xform the slide bounds completely, then limit the
translation that will be applied after that. Slides are
now correctly pinned to screen edge regardless of how
much zoom is present in the default matrix.
Note: There are still several bugs related to all of this
code, but given the web of xform state, it's hard to
unravel. The touch gesture still doesn't know about
viewer's zoom, so that's ignored when doing the pinning.
Beyond that, it doesn't even know about window resize -
it only configures the translation limit when setting up
a slide. I had a fix for all of this (doing the
translation limiting in computeMatrix), but then the touch
gesture doesn't know about it, and can accumulate drag
motion that needs to be un-dragged to get back on-screen,
even though the slide is never really translated that far.
SkTouchGesture is in include. No one uses it except viewer:
TBR=bsalomon@google.com
Bug: skia:
Change-Id: I460cc07c3de6d36e63826f57d359faf1facf5ab3
Reviewed-on: https://skia-review.googlesource.com/18524
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Create a new SkImage public API to make an image from an Android
hardware buffer. Implementation is using a SkImageGenerator
derived class GrAndroidBufferImageGenerator.
A new EGLImage texture is created, which is then wrapped with
GrTextureProxy.
Bug: skia:
Change-Id: I610a4c5a58198686ce7c03e9a0adad3f9d2342e0
Reviewed-on: https://skia-review.googlesource.com/17789
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Stan Iliev <stani@google.com>
Chromium usually calls SetInstance once per process. However, when run in single process more renderer threads will try to set the instance after the browser process already has done so. This allows them to fail gracefully without asserting.
Bug: skia:6603
Change-Id: Ic8a35422d787335aa67eefc07d0658f0fbe73db4
Reviewed-on: https://skia-review.googlesource.com/16664
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Also enables mouse support in Viewer.
Change-Id: Iaed08d42a64f591f0cd9b24684b3aee43404ed94
Reviewed-on: https://skia-review.googlesource.com/15313
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Change-Id: I0ff11088465a4702acf9841a791d76f286ddbaf1
Reviewed-on: https://skia-review.googlesource.com/15147
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit e3bd422faf.
Reason for revert: Pre-req changes have all landed in other projects at this point.
Original change's description:
> Revert "Plumb the use of GrBackendRenderTarget throughout Skia"
>
> This reverts commit fdd77daedb.
>
> Reason for revert: Apparently I have a few more build files to update before this can land.
>
> Original change's description:
> > Plumb the use of GrBackendRenderTarget throughout Skia
> >
> > Bug: skia:
> > Change-Id: Ib99a58d9552f5c7b8d77c09dcc72fa88326c26aa
> > Reviewed-on: https://skia-review.googlesource.com/14148
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > Reviewed-by: Robert Phillips <robertphillips@google.com>
> > Commit-Queue: Greg Daniel <egdaniel@google.com>
> >
>
> TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com,reviews@skia.org
> NOPRESUBMIT=true
> NOTREECHECKS=true
> NOTRY=true
>
> Change-Id: I984e1909870182474c4c3cce257f01b6a9d8581f
> Reviewed-on: https://skia-review.googlesource.com/14531
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
>
TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com,reviews@skia.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: Ib7ab94aada8a7cb80fe38f24daf32f9208c5b169
Reviewed-on: https://skia-review.googlesource.com/14826
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Many tests and examples use drawText with
a guess of how long the text is in bytes,
or a call to strlen(). Add a helper to
SkCanvas to simplify these examples.
Add another helper for SkString.
R=reed@google.com
Change-Id: I0204a31e938f065606f08ee7cd9a6b36db791ee2
Reviewed-on: https://skia-review.googlesource.com/13642
Commit-Queue: Cary Clark <caryclark@google.com>
Reviewed-by: Cary Clark <caryclark@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Cary Clark <caryclark@skia.org>
This reverts commit fdd77daedb.
Reason for revert: Apparently I have a few more build files to update before this can land.
Original change's description:
> Plumb the use of GrBackendRenderTarget throughout Skia
>
> Bug: skia:
> Change-Id: Ib99a58d9552f5c7b8d77c09dcc72fa88326c26aa
> Reviewed-on: https://skia-review.googlesource.com/14148
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
>
TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com,reviews@skia.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Change-Id: I984e1909870182474c4c3cce257f01b6a9d8581f
Reviewed-on: https://skia-review.googlesource.com/14531
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Also remove the feature of GrVkGpu that creates the instance/device if the client doesn't provide one.
Change-Id: Ie617313b6c684ed355333a475b80d0aae7e3a026
Reviewed-on: https://skia-review.googlesource.com/14261
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Currently the Vulkan backend is set up to always treat the "resolve"
target as the main VkImage in a render target and the msaa is a side cart
image. This makes it difficult to just wrap an msaa image that we don't own.
However, unlike GL the equivalent FBO 0 will never be multisampled so there
isn't much use for the functionality. Once we find a need for it we can find
a way to refactor to make it work.
Bug: skia:
Change-Id: I121e9c72a70c2a6f1aaddba2dbae19d8bddc3998
Reviewed-on: https://skia-review.googlesource.com/13980
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This CL adds the GrBackend* classes as well as just updates the API for SkSurface and
SkImage. The implementation on SkSurface/Image and the plumbing down into Ganesh will
be in an additional CL.
Besides the change to use the type safe classes, we also pull the SurfaceFlags, origin,
samples, out of the descriptor and pass those in directly.
Bug: skia:
Change-Id: I9702981fe26c3d5d7d2cbcf6977ba569d356d854
Reviewed-on: https://skia-review.googlesource.com/13122
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
BUG=skia:
Change-Id: I03a8a1b1ed9bd2483ddd8e231ba54dc10753b454
Reviewed-on: https://skia-review.googlesource.com/9836
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Also disables use of small distance fields in Android framework.
Change-Id: I1ba40ce85aa34d067608587e1fbe1d42e8a42868
Reviewed-on: https://skia-review.googlesource.com/9731
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Also avoid asserting when untagged images are being transformed.
BUG=skia:
Change-Id: If712f39b5f588b2bc3dc318a5b782badb7662ccf
Reviewed-on: https://skia-review.googlesource.com/9695
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
On Windows, we need to reconstruct the window to allow setting a new
pixel format with a different sample count.
Added some code that maintains window size/position across these changes.
Previously, just cycling through backends would cause the window to move,
as the "default" position would cycle across the screen. Now it's pinned.
BUG=skia:
Change-Id: Iecbe7a490577382043ffe5a88c910b4c0be2ed5c
Reviewed-on: https://skia-review.googlesource.com/9085
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Eliminates a UI oddity on Windows when cycling through backends.
BUG=skia:
Change-Id: I83f0325054def80bb9b6e5a9886461f8aad215ae
Reviewed-on: https://skia-review.googlesource.com/9453
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Previously this could only be turned on at runtime.
Change-Id: I1b626584fba17fcf8ff64135dd93f98c7f40821d
Reviewed-on: https://skia-review.googlesource.com/9445
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Change-Id: I0cc82fe826b81a082b579f60af3d9ef35d5fe351
Reviewed-on: https://skia-review.googlesource.com/9407
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
BUG=skia:
Change-Id: I42674abfb7ee764f676100ac0e84cc0f07620bec
Reviewed-on: https://skia-review.googlesource.com/9396
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
BUG=skia:6242
Change-Id: I696de8eac61aebaf5cb07d8874bde3c7bd470277
Reviewed-on: https://skia-review.googlesource.com/9299
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
BUG=skia:
Change-Id: I248ba081f0229d7fcf2071009076acc88b80b076
Reviewed-on: https://skia-review.googlesource.com/9088
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
These values were left uninitialized, leading to problems with the GUI
in raster configs.
BUG=skia:
Change-Id: Ia8c16112e53b74daf66941d2923327c9732cf432
Reviewed-on: https://skia-review.googlesource.com/9114
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
I was getting sporadic failures from XInitImage (causing the raster
backend to not draw anything).
BUG=skia:
Change-Id: Ied79f2b5354d89c146aca64d70fde8cf9f3ab62e
Reviewed-on: https://skia-review.googlesource.com/9102
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
BUG=skia:
Change-Id: I3314013538792c2aa82cc49f3f072aab2cdc4a55
Reviewed-on: https://skia-review.googlesource.com/9079
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
BUG=skia:
Change-Id: I626aa6a1571311600a6208c42a8c3e9509d037de
Reviewed-on: https://skia-review.googlesource.com/9078
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Also removes fWidth and fHeight from Window and instead
calls into WindowContent to get these values.
BUG=skia:
Change-Id: I72ee506004b7da73db9abb607a3bc82edfcf7d43
Reviewed-on: https://skia-review.googlesource.com/8795
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Yuqian Li <liyuqian@google.com>
The whole idea of immediate mode GUIs is to put your GUI code and the
resulting action close together. Unfortunately, for actions that tear
down the backend (possibly freeing the surfaces we're drawing to), we
can't do that. So defer that action until the next frame (really, the
next idle). Only required when an action might call setDisplayParams.
BUG=skia:
Change-Id: I3eb95fdb462526cb6d95819612ad2725c6f1050b
Reviewed-on: https://skia-review.googlesource.com/8953
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Adds radio buttons for switching among legacy, sRGB and F16.
Also adds a list of primaries you can pick from, as well as
a gamut diagram showing the primaries. The primaries can be
dragged around to alter the working space.
BUG=skia:
Change-Id: Ibd8c67dfe085594c0d7462f0efe4d79d73999919
Reviewed-on: https://skia-review.googlesource.com/8311
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
android now updated.
This reverts commit e005edd3a5.
BUG=skia:6250
Change-Id: If08d344cdd863fde1d9955dc3fab671a83be0f73
Reviewed-on: https://skia-review.googlesource.com/8815
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Change-Id: I9a9bff1c950aaeda095ee49b4860c6fee04ea731
Reviewed-on: https://skia-review.googlesource.com/8887
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Adds a bitfield to GrContextOptions that masks out path renderers.
Adds commandline flags support to set this bitfield in tools apps.
Removes GrGLInterfaceRemoveNVPR since we can now accomplish the same
thing in the context options.
BUG=skia:
Change-Id: Icf2a4df36374b3ba2f69ebf0db56e8aedd6cf65f
Reviewed-on: https://skia-review.googlesource.com/8786
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Fixes loading a Sample as first slide.
Adds char input.
Adds --slide and --list options.
Change-Id: I34b66818e3673fcfdc649443e7d9dfb74b478062
Reviewed-on: https://skia-review.googlesource.com/8445
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Made it a separate ImGui window (rather than part of the debug window).
Bring it up with 'z'. Draggable/resizable. Variable zoom scale. Enjoy.
BUG=skia:
Change-Id: I949ab398126c892c8d353aaebcc8403765f42841
Reviewed-on: https://skia-review.googlesource.com/8357
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
BUG=skia:
Change-Id: I7f467c094fb0bcb983bd86d07cb9bd7be34666b3
Reviewed-on: https://skia-review.googlesource.com/8332
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Code and docs are at: https://github.com/ocornut/imgui
ImGui is an open source immediate mode GUI library that's
lightweight and fairly simply to integrate. Widget functions
return their state, and the library emits vertex and index
data to render everything. It's got a huge set of built-in
widgets and really robust layout control.
For the initial integration, I had to fix up event handling
in the viewer's app framework (to get mouse wheel and more
keys, etc...).
The new viewer 'Debug' window is toggled with the space bar.
For this change, I've added one feature to that window: the
slide picker. It's got a list of all slides, with filtering
support, and the ability to click to switch slides.
I also included the ImGui 'Demo' window (toggled with 'g').
This is nicely laid out, and includes examples of pretty
much everything the library can do. It also serves as good
documentation - find something that looks like what you want,
and then go look at the corresponding code (all of it is in
imgui_demo.cpp).
I have other CLs with other features (like directly editing
the primaries of the working color space), but I wanted to
land this chunk first, then start adding more features.
Other than adding new debugging features, there are few
more outstanding work items:
1) Raster doesn't render the GUI correctly, due to non-
invertible pos -> UV matrices. Florin is working on that.
2) Touch inputs aren't being routed yet, so the GUI isn't
usable on Android yet. Might also be tough to work with,
given the size.
3) ImGui has clipboard integration (that's why it wants
the C, X, and V keys), but we need to wire it up to the
OS' clipboard functions.
4) Draw commands can carry a void* payload to support
drawing images (using whatever mechanism the engine has).
I'd like to set that up (probably using SkImage*), which
makes it really easy to add visualization of off-screen
images in GMs, etc...
BUG=skia:
Change-Id: Iac2a63e37228d33141cb55b7e4d60bf11b7e9ae1
Reviewed-on: https://skia-review.googlesource.com/7702
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Measure the time taken for animation and flush. Exclude UI and stats logic
from the timing. Use stacked bars to visualize the breakdown of time
within a frame.
BUG=skia:
Change-Id: I7ef84442a68147f02f65b6aa4452768fd3314de2
Reviewed-on: https://skia-review.googlesource.com/8227
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
We need libandroid in all scenarios, not just vulkan.
Also, the logic for making an off-screen surface was
wrong - causing us to try and make one in legacy mode.
BUG=skia:
Change-Id: I5ef2e3e2d46de96e9824f6a12a13f6310ea04f81
Reviewed-on: https://skia-review.googlesource.com/8252
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
WindowContext still supports color spaces, but not other color
types. Any off-screen rendering is the app's responsibility.
This change also adds (working) F16 support to viewer. Note that
the previous 10-bit and FP16 support in WindowContext was broken.
There was no code to push the off-screen canvas to the window.
If you ever made it to the unreachable off-screen code path in
createSurface, it would have simply stopped drawing.
The decision to limit the window's gamut to sRGB is mostly driven
by my desire to add real-time editing of gamut. This design lets
us do that, without tearing down and rebuilding the window for
every change. An application could still supply a different gamut
via setDisplayParams and render directly to the back buffer with
proper color correction.
BUG=skia:
Change-Id: I94df35c7a42faee396009acc83683e40bb3c284d
Reviewed-on: https://skia-review.googlesource.com/8153
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Matt Sarett <msarett@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
BUG=skia:
Change-Id: I01c5e1874c9a034febc64e25b3aaafb5050393a6
Reviewed-on: https://skia-review.googlesource.com/8021
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Matt Sarett <msarett@google.com>
* SkAutoFree moved to SkTemplates.h (now implmented with unique_ptr).
* SkAutoMalloc and SkAutoSMalloc moved to SkAutoMalloc.h
* "SkAutoFree X(sk_malloc_throw(N));" --> "SkAutoMalloc X(N);"
Revert "Revert 'SkTypes.h : move SkAutoMalloc into SkAutoMalloc.h'"
This reverts commit c456b73fef.
Change-Id: Ie2c1a17c20134b8ceab85a68b3ae3e61c24fbaab
Reviewed-on: https://skia-review.googlesource.com/6886
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
* SkAutoFree moved to SkTemplates.h (now implmented with unique_ptr).
* SkAutoMalloc and SkAutoSMalloc moved to SkAutoMalloc.h
* "SkAutoFree X(sk_malloc_throw(N));" --> "SkAutoMalloc X(N);"
Change-Id: Idacd86ca09e22bf092422228599ae0d9bedded88
Reviewed-on: https://skia-review.googlesource.com/4543
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
It is moved to src/utils. It is almost a tool, but has two uses in
src/ports.
The existing SkOSFile.cpp is left empty for the time being since it is
mentioned in Chromium's BUILD.gn for Skia.
Change-Id: I3bb7f7c4214359eb6ab906bfe76737d20bf1d6c7
Reviewed-on: https://skia-review.googlesource.com/4536
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <bungeman@google.com>
Replace with std::unique_ptr.
Change-Id: I5806cfbb30515fcb20e5e66ce13fb5f3b8728176
Reviewed-on: https://skia-review.googlesource.com/4381
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Our internal definition is (and will continue to be) that anything with
a color space is gamma correct. F16 is irrelevant (whether or not we
choose to support untagged F16). This makes these helpers less than
helpful, and lets us remove them from (public) API.
API change is just removal (of unused functions).
TBR=reed@google.com
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=4228
Change-Id: Ia84a423548bfee14a3ba4a43d6d5b8c4686fb5ff
Reviewed-on: https://skia-review.googlesource.com/4228
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
Need to attach the sRGB color space to the surface to get past validation.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3905
Change-Id: Icce1c8cf35c31023c116cbcddf8848c4c92cd212
Reviewed-on: https://skia-review.googlesource.com/3905
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Matches our naming convention for all other types - factories that
return sk_sp (or any type that intelligently manages its own
lifetime) are named Make.
Previous factories are still around, assuming
SK_SUPPORT_LEGACY_COLOR_SPACE_FACTORIES is defined. Enable that
define for Android, etc.
See also: https://codereview.chromium.org/2442053002/
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3822
Change-Id: Iaea9376490736b494e8ffc820831f052bbe1478d
Reviewed-on: https://skia-review.googlesource.com/3822
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
BUG=skia:
Change-Id: Ia0c10db49905fc5a3bdf424c38576e1a6cf09ecf
Reviewed-on: https://skia-review.googlesource.com/3606
Reviewed-by: Mike Klein <mtklein@chromium.org>
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This will fix the Vulkan orientation when the screen is rotated by having
the compositor do the corrections for us. However, it is suggested in the
Android Vulkan docs that for power reasons it may be better for the app
to get the needed rotation off of the VkAndroidSurface and then manually
adjust for this rotation in the rendering without the compositor doing any
corrections. This is something we can look into a later date as it would
require sending some info back from the VulkanWindowContext back to Skia
about what Matrix should be applied.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=3052
Change-Id: I4d3d620ffcc77e607fce8d06b869c2912a61400c
Reviewed-on: https://skia-review.googlesource.com/3052
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
- perform version check in CreateProc for XfermodeImageFilter and ArithmeticImageFilter
This reverts commit 3ed485f424.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2992
Change-Id: Ib4a154cdd5f5d1dcac921ef50d53b79a2d6a1be8
Reviewed-on: https://skia-review.googlesource.com/2992
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8c
Review-Url: https://codereview.chromium.org/2339273002
Reason for revert:
Killing Mac
Original issue's description:
> SkFontData to use smart pointers.
>
> The SkFontData type is not exposed externally, so any method which uses
> it can be updated to use smart pointers without affecting external
> users. Updating this first will make updating the public API much
> easier.
>
> This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
> std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
> appears that no one outside Skia is currently using SkStream::NewfromFile
> so this is a good time to update it as well.
>
> GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
>
> Committed: https://skia.googlesource.com/skia/+/d8c2476a8b1e1e1a1771b17e8dd4db8645914f8cTBR=mtklein@chromium.org,halcanary@google.com,mtklein@google.com,reed@google.com
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review-Url: https://codereview.chromium.org/2343933002
The SkFontData type is not exposed externally, so any method which uses
it can be updated to use smart pointers without affecting external
users. Updating this first will make updating the public API much
easier.
This also updates SkStreamAsset* SkStream::NewFromFile(const char*) to
std::unique_ptr<SkStreamAsset> SkStream::MakeFromFile(const char*). It
appears that no one outside Skia is currently using SkStream::NewfromFile
so this is a good time to update it as well.
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2339273002
Review-Url: https://codereview.chromium.org/2339273002
Tried to comment my logic, but it's totally possible that we run on some
device where this doesn't work. From a strict reading of the relevant
specs, what I'm doing shouldn't work on the Nexus 5X, but it's necessary
to get correct results.
BUG=skia:
GOLD_TRYBOT_URL= https://gold.skia.org/search?issue=2054223002
Review-Url: https://codereview.chromium.org/2054223002
