C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log2p1 functions (log2(1+x): like log1p, but for
base-2 logarithms).
This illustrates the intended structure of implementations of all
these function families: define them initially with a type-generic
template implementation. If someone wishes to add type-specific
implementations, it is likely such implementations can be both faster
and more accurate than the type-generic one and can then override it
for types for which they are implemented (adding benchmarks would be
desirable in such cases to demonstrate that a new implementation is
indeed faster).
The test inputs are copied from those for log1p. Note that these
changes make gen-auto-libm-tests depend on MPFR 4.2 (or later).
The bulk of the changes are fairly generic for any such new function.
(sysdeps/powerpc/nofpu/Makefile only needs changing for those
type-generic templates that use fabs.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
Linux 6.9 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.9.
Tested with build-many-glibcs.py.
Fix BZ #31755 by renaming the internal function procutils_read_file to
__libc_procutils_read_file.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fix BZ #31759 by not defining nearbyint aliases when used in IFUNC.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
This supports common coding patterns. The GCC C front end before
version 7 rejects the may_alias attribute on a struct definition
if it was not present in a previous forward declaration, so this
attribute can only be conditionally applied.
This implements the spirit of the change in Austin Group issue 1641.
Suggested-by: Marek Polacek <polacek@redhat.com>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Sam James <sam@gentoo.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch ensures that $libc_cv_cc_submachine, which is set from
"--with-cpu", overrides $CFLAGS for configure time tests.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
This is mostly based on AArch64 and RISC-V implementation.
Add R_LARCH_TLS_DESC32 and R_LARCH_TLS_DESC64 relocations.
For _dl_tlsdesc_dynamic function slow path, temporarily save and restore
all vector registers.
Previously many routines used * to load from vector types stored
in the data table. This is emitted as ldr, which byte-swaps the
entire vector register, and causes bugs for big-endian when not
all lanes contain the same value. When a vector is to be used
this way, it has been replaced with an array and the load with an
explicit ld1 intrinsic, which byte-swaps only within lanes.
As well, many routines previously used non-standard GCC syntax
for vector operations such as indexing into vectors types with []
and assembling vectors using {}. This syntax should not be mixed
with ACLE, as the former does not respect endianness whereas the
latter does. Such examples have been replaced with, for instance,
vcombine_* and vgetq_lane* intrinsics. Helpers which only use the
GCC syntax, such as the v_call helpers, do not need changing as
they do not use intrinsics.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The e68b1151f7 commit changed the
__fesetround_inline_nocheck implementation to use mffscrni
(through __fe_mffscrn) instead of mtfsfi. For generic powerpc
ceil/floor/trunc, the function is supposed to disable the
floating-point inexact exception enable bit, however mffscrni
does not change any exception enable bits.
This patch fixes by reverting the optimization for the
__fesetround_inline_nocheck.
Checked on powerpc-linux-gnu.
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
This code expects the WCSCAT preprocessor macro to be predefined in case
the evex implementation of the function should be defined with a name
different from __wcsncat_evex. However, when glibc is built for
x86-64-v4 without multiarch support, sysdeps/x86_64/wcsncat.S defines
WCSNCAT variable instead of WCSCAT to build it as wcsncat. Rename the
variable to WCSNCAT, as it is actually a better naming choice for the
variable in this case.
Reported-by: Kenton Groombridge
Link: https://bugs.gentoo.org/921945
Fixes: 64b8b6516b ("x86: Add evex optimized functions for the wchar_t strcpy family")
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
The 680c597e9c commit made loader reject ill-formatted strings by
first tracking all set tunables and then applying them. However, it does
not take into consideration if the same tunable is set multiple times,
where parse_tunables_string appends the found tunable without checking
if it was already in the list. It leads to a stack-based buffer overflow
if the tunable is specified more than the total number of tunables. For
instance:
GLIBC_TUNABLES=glibc.malloc.check=2:... (repeat over the number of
total support for different tunable).
Instead, use the index of the tunable list to get the expected tunable
entry. Since now the initial list is zero-initialized, the compiler
might emit an extra memset and this requires some minor adjustment
on some ports.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reported-by: Yuto Maeda <maeda@cyberdefense.jp>
Reported-by: Yutaro Shimizu <shimizu@cyberdefense.jp>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Starting from glibc 2.1, crt1.o contains _IO_stdin_used which is checked
by _IO_check_libio to provide binary compatibility for glibc 2.0. Add
crt1-2.0.o for tests against glibc 2.0. Define tests-2.0 for glibc 2.0
compatibility tests. Add and update glibc 2.0 compatibility tests for
stderr, matherr and pthread_kill.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch is based on __strcmp_power10.
Improvements from __strncmp_power9:
1. Uses new POWER10 instructions
- This code uses lxvp to decrease contention on load
by loading 32 bytes per instruction.
2. Performance implication
- This version has around 38% better performance on average.
- Minor performance regression is seen for few small sizes
and specific combination of alignments.
Signed-off-by: Amrita H S <amritahs@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
This patch adds hardware floating point support to OpenRISC. Hardware
floating point toolchain builds are enabled by passing the machine
specific argument -mhard-float to gcc via CFLAGS. With this enabled GCC
generates floating point instructions for single-precision operations
and exports __or1k_hard_float__.
There are 2 main parts to this patch.
- Implement fenv functions to update the FPCSR flags keeping it in sync
with sfp (software floating point).
- Update machine context functions to store and restore the FPCSR
state.
*On mcontext_t ABI*
This patch adds __fpcsr to mcontext_t. This is an ABI change, but also
an ABI fix. The Linux kernel has always defined padding in mcontext_t
that space was missing from the glibc ABI. In Linux this unused space
has now been re-purposed for storing the FPCSR. This patch brings
OpenRISC glibc in line with the Linux kernel and other libc
implementation (musl).
Compatibility getcontext, setcontext, etc symbols have been added to
allow for binaries expecting the old ABI to continue to work.
*Hard float ABI*
The calling conventions and types do not change with OpenRISC hard-float
so glibc hard-float builds continue to use dynamic linker
/lib/ld-linux-or1k.so.1.
*Testing*
I have tested this patch both with hard-float and soft-float builds and
the test results look fine to me. Results are as follows:
Hard Float
# failures
FAIL: elf/tst-sprof-basic (Haven't figured out yet, not related to hard-float)
FAIL: gmon/tst-gmon-pie (PIE bug in or1k toolchain)
FAIL: gmon/tst-gmon-pie-gprof (PIE bug in or1k toolchain)
FAIL: iconvdata/iconv-test (timeout, passed when run manually)
FAIL: nptl/tst-cond24 (Timeout)
FAIL: nptl/tst-mutex10 (Timeout)
# summary
6 FAIL
4289 PASS
86 UNSUPPORTED
16 XFAIL
2 XPASS
# versions
Toolchain: or1k-smhfpu-linux-gnu
Compiler: gcc version 14.0.1 20240324 (experimental) [master r14-9649-gbb04a11418f] (GCC)
Binutils: GNU assembler version 2.42.0 (or1k-smhfpu-linux-gnu) using BFD version (GNU Binutils) 2.42.0.20240324
Linux: Linux buildroot 6.9.0-rc1-00008-g4dc70e1aadfa #112 SMP Sat Apr 27 06:43:11 BST 2024 openrisc GNU/Linux
Tester: shorne
Glibc: 2024-04-25 b62928f907 Florian Weimer x86: In ld.so, diagnose missing APX support in APX-only builds (origin/master, origin/HEAD)
Soft Float
# failures
FAIL: elf/tst-sprof-basic
FAIL: gmon/tst-gmon-pie
FAIL: gmon/tst-gmon-pie-gprof
FAIL: nptl/tst-cond24
FAIL: nptl/tst-mutex10
# summary
5 FAIL
4295 PASS
81 UNSUPPORTED
16 XFAIL
2 XPASS
# versions
Toolchain: or1k-smh-linux-gnu
Compiler: gcc version 14.0.1 20240324 (experimental) [master r14-9649-gbb04a11418f] (GCC)
Binutils: GNU assembler version 2.42.0 (or1k-smh-linux-gnu) using BFD version (GNU Binutils) 2.42.0.20240324
Linux: Linux buildroot 6.9.0-rc1-00008-g4dc70e1aadfa #112 SMP Sat Apr 27 06:43:11 BST 2024 openrisc GNU/Linux
Tester: shorne
Glibc: 2024-04-25 b62928f907 Florian Weimer x86: In ld.so, diagnose missing APX support in APX-only builds (origin/master, origin/HEAD)
Documentation: https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.4-rev0.pdf
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the ulps test file to prepare for the upcoming
hard float patch. This is separated out to make the hard float patch
smaller.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit c73c96a4a1 updated memcpy.S and
mempcpy.S, but omitted memmove.S and memset.S. As a result, the static
library built as PIC, whether with or without multiarch support,
contains two definitions for each of the __memmove_chk and __memset_chk
symbols.
/usr/lib/gcc/i686-pc-linux-gnu/14/../../../../i686-pc-linux-gnu/bin/ld: /usr/lib/gcc/i686-pc-linux-gnu/14/../../../../lib/libc.a(memset-ia32.o): in function `__memset_chk':
/var/tmp/portage/sys-libs/glibc-2.39-r3/work/glibc-2.39/string/../sysdeps/i386/i686/memset.S:32: multiple definition of `__memset_chk'; /usr/lib/gcc/i686-pc-linux-gnu/14/../../../../lib/libc.a(memset_chk.o):/var/tmp/portage/sys-libs/glibc-2.39-r3/work/glibc-2.39/debug/../sysdeps/i386/i686/multiarch/memset_chk.c:24: first defined here
After this change, regardless of PIC options, the static library, built
for i686 with multiarch contains implementations of these functions
respectively from debug/memmove_chk.c and debug/memset_chk.c, and
without multiarch contains implementations of these functions
respectively from sysdeps/i386/memmove_chk.S and
sysdeps/i386/memset_chk.S. This ensures that memmove and memset won't
pull in __chk_fail and the routines it calls.
Reported-by: Sam James <sam@gentoo.org>
Tested-by: Sam James <sam@gentoo.org>
Fixes: c73c96a4a1 ("i686: Fix build with --disable-multiarch")
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
/home/bmg/install/compilers/x86_64-linux-gnu/lib/gcc/x86_64-glibc-linux-gnu/13.2.1/../../../../x86_64-glibc-linux-gnu/bin/ld: /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(memcpy_chk.o): in function `__memcpy_chk':
/home/bmg/src/glibc/debug/../sysdeps/i386/memcpy_chk.S:29: multiple definition of `__memcpy_chk';/home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(memcpy.o):/home/bmg/src/glibc/string/../sysdeps/i386/i586/memcpy.S:31: first defined here /home/bmg/install/compilers/x86_64-linux-gnu/lib/gcc/x86_64-glibc-linux-gnu/13.2.1/../../../../x86_64-glibc-linux-gnu/bin/ld: /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(mempcpy_chk.o): in function `__mempcpy_chk': /home/bmg/src/glibc/debug/../sysdeps/i386/mempcpy_chk.S:28: multiple definition of `__mempcpy_chk'; /home/bmg/build/glibcs/i586-linux-gnu/glibc/libc.a(mempcpy.o):/home/bmg/src/glibc/string/../sysdeps/i386/i586/memcpy.S:31: first defined here
After this change, the static library built for i586, regardless of PIC
options, contains implementations of these functions respectively from
sysdeps/i386/memcpy_chk.S and sysdeps/i386/mempcpy_chk.S. This ensures
that memcpy and mempcpy won't pull in __chk_fail and the routines it
calls.
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Gabi Falk <gabifalk@gmx.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Dmitry V. Levin <ldv@altlinux.org>
The FSF's Licensing and Compliance Lab noted a discrepancy in the
licensing of several files in the glibc package.
When timespect_get.c was impelemented the license did not include
the standard ", or (at your option) any later version." text.
Change the license in timespec_get.c and all copied files to match
the expected license.
This change was previously approved in principle by the FSF in
RT ticket #1316403. And a similar instance was fixed in
commit 46703efa02.
At this point, this is mainly a tool for testing the early ld.so
CPU compatibility diagnostics: GCC uses the new instructions in most
functions, so it's easy to spot if some of the early code is not
built correctly.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Define MINIMUM_X86_ISA_LEVEL at configure time to avoid
/usr/bin/ld: …/build/elf/librtld.os: in function `init_cpu_features':
…/git/elf/../sysdeps/x86/cpu-features.c:1202: undefined reference to `_dl_runtime_resolve_fxsave'
/usr/bin/ld: …/build/elf/librtld.os: relocation R_X86_64_PC32 against undefined hidden symbol `_dl_runtime_resolve_fxsave' can not be used when making a shared object
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
when glibc is built with -march=x86-64-v3 and configured with
--with-rtld-early-cflags=-march=x86-64, which is used to allow ld.so to
print an error message on unsupported CPUs:
Fatal glibc error: CPU does not support x86-64-v3
This fixes BZ #31676.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
The current IFUNC selection is always using the most recent
features which are available via AT_HWCAP. But in
some scenarios it is useful to adjust this selection.
The environment variable:
GLIBC_TUNABLES=glibc.cpu.hwcaps=-xxx,yyy,zzz,....
can be used to enable HWCAP feature yyy, disable HWCAP feature xxx,
where the feature name is case-sensitive and has to match the ones
used in sysdeps/loongarch/cpu-tunables.c.
Signed-off-by: caiyinyu <caiyinyu@loongson.cn>
Fall back to ppoll if ppoll_time64 fails with ENOSYS.
Fixes commit 370da8a121 ("nptl: Fix
tst-cancel30 on sparc64").
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These fields store timestamps when the system was running. No Linux
systems existed before 1970, so these values are unused. Switching
to unsigned types allows continued use of the existing struct layouts
beyond the year 2038.
The intent is to give distributions more time to switch to improved
interfaces that also avoid locking/data corruption issues.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
These structs describe file formats under /var/log, and should not
depend on the definition of _TIME_BITS. This is achieved by
defining __WORDSIZE_TIME64_COMPAT32 to 1 on 32-bit ports that
support 32-bit time_t values (where __time_t is 32 bits).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The default <utmp-size.h> is for ports with a 64-bit time_t.
Ports with a 32-bit time_t or with __WORDSIZE_TIME64_COMPAT32=1
need to override it.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This seems to have stopped working with some GCC 14 versions,
which clobber r2. With other compilers, the kernel-provided
r2 value is still available at this point.
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
This reverts commit a1735e0aa8.
The test failure is a real valgrind bug that needs to be fixed before
valgrind is usable with a glibc that has been built with
CC="gcc -march=x86-64-v3". The proposed valgrind patch teaches
valgrind to replace ld.so strcmp with an unoptimized scalar
implementation, thus avoiding any AVX2-related problems.
Valgrind bug: <https://bugs.kde.org/show_bug.cgi?id=485487>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The gnulib version contains an important change (9ce573cde), which
fixes some problems with multithreading, entropy loss, and ASLR leak
nfo. It also fixes an issue where getrandom is not being used
on some new files generation (only for __GT_NOCREATE on first try).
The 044bf893ac removed __path_search, which is now moved to another
gnulib shared files (stdio-common/tmpdir.{c,h}). Tthis patch
also fixes direxists to use __stat64_time64 instead of __xstat64,
and move the include of pathmax.h for !_LIBC (since it is not used
by glibc). The license is also changed from GPL 3.0 to 2.1, with
permission from the authors (Bruno Haible and Paul Eggert).
The sync also removed the clock fallback, since clock_gettime
with CLOCK_REALTIME is expected to always succeed.
It syncs with gnulib commit 323834962817af7b115187e8c9a833437f8d20ec.
Checked on x86_64-linux-gnu.
Co-authored-by: Bruno Haible <bruno@clisp.org>
Co-authored-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Bruno Haible <bruno@clisp.org>
This prints some information from struct cpu_features, and the midr_el1
and dczid_el0 system register contents on every CPU.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This is surprisingly difficult to implement if the goal is to produce
reasonably sized output. With the current approaches to output
compression (suppressing zeros and repeated results between CPUs,
folding ranges of identical subleaves, dealing with the %ecx
reflection issue), the output is less than 600 KiB even for systems
with 256 logical CPUs.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
When -mapxf is used to build glibc, the resulting glibc will never run
on FMA4 machines. Exclude FMA4 IFUNC functions when -mapxf is used.
This requires GCC which defines __APX_F__ for -mapxf with commit:
1df56719bd8 x86: Define __APX_F__ for -mapxf
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
The a4ed0471d7 removed the generic version which is included by
features.h and used by Hurd.
Checked by building i686-gnu and x86_64-gnu with build-many-glibc.py.
The implementations of trunc functions using x87 floating point (i386 and
x86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The implementations of floor functions using x87 floating point (i386 and
86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The implementations of ceil functions using x87 floating point (i386 and
x86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
In Linux 6.9 a new flag is added to allow for Per-io operations to
disable append mode even if a file was opened with the flag O_APPEND.
This is done with the new RWF_NOAPPEND flag.
This caused two test failures as these tests expected the flag 0x00000020
to be unused. Adding the flag definition now fixes these tests on Linux
6.9 (v6.9-rc1).
FAIL: misc/tst-preadvwritev2
FAIL: misc/tst-preadvwritev64v2
This patch adds the flag, adjusts the test and adds details to
documentation.
Link: https://lore.kernel.org/all/20200831153207.GO3265@brightrain.aerifal.cx/
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The ifunc variants now uses the powerpc implementation which in turn
uses the compiler builtin. Without the proper -mcpu switch the builtin
does not generate the expected optimization.
Checked on powerpc-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
It was raised on libc-help [1] that some Linux kernel interfaces expect
the libc to define __USE_TIME_BITS64 to indicate the time_t size for the
kABI. Different than defined by the initial y2038 design document [2],
the __USE_TIME_BITS64 is only defined for ABIs that support more than
one time_t size (by defining the _TIME_BITS for each module).
The 64 bit time_t redirects are now enabled using a different internal
define (__USE_TIME64_REDIRECTS). There is no expected change in semantic
or code generation.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and
arm-linux-gnueabi
[1] https://sourceware.org/pipermail/libc-help/2024-January/006557.html
[2] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign
Reviewed-by: DJ Delorie <dj@redhat.com>
As indicated in a recent thread, this it is a simple brute-force
algorithm that checks the whole needle at a matching character pair
(and does so 1 byte at a time after the first 64 bytes of a needle).
Also it never skips ahead and thus can match at every haystack
position after trying to match all of the needle, which generic
implementation avoids.
As indicated by Wilco, a 4x larger needle and 16x larger haystack gives
a clear 65x slowdown both basic_strstr and __strstr_avx512:
"ifuncs": ["basic_strstr", "twoway_strstr", "__strstr_avx512",
"__strstr_sse2_unaligned", "__strstr_generic"],
{
"len_haystack": 65536,
"len_needle": 1024,
"align_haystack": 0,
"align_needle": 0,
"fail": 1,
"desc": "Difficult bruteforce needle",
"timings": [4.0948e+07, 15094.5, 3.20818e+07, 108558, 10839.2]
},
{
"len_haystack": 1048576,
"len_needle": 4096,
"align_haystack": 0,
"align_needle": 0,
"fail": 1,
"desc": "Difficult bruteforce needle",
"timings": [2.69767e+09, 100797, 2.08535e+09, 495706, 82666.9]
}
PS: I don't have an AVX512 capable machine to verify this issues, but
skimming through the code it does seems to follow what Wilco has
described.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The value of l_scope is only valid post relocation, so this original
check was triggering undefined behavior. Instead just directly check to
see if the object has been relocated, at which point using l_scope is
safe.
Reported-by: Andreas Schwab <schwab@suse.de>
Closes: BZ #31317
Fixes: e0590f41fe ("RISC-V: Enable static-pie.")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Previously, HTL would always allocate non-executable stacks. This has
never been noticed, since GNU Mach on x86 ignores VM_PROT_EXECUTE and
makes all pages implicitly executable. Since GNU Mach on AArch64
supports non-executable pages, HTL forgetting to pass VM_PROT_EXECUTE
immediately breaks any code that (unfortunately, still) relies on
executable stacks.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-7-bugaevc@gmail.com>
While we could support it on any architecture, the tunable is currently
only defined on x86_64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-5-bugaevc@gmail.com>
Move _hurd_self_sigstate (), _hurd_critical_section_lock (), and
_hurd_critical_section_unlock () inline implementations (that were
already guarded by #if defined _LIBC) to the internal version of the
header. While at it, add <tls.h> to the includes, and use
__LIBC_NO_TLS () unconditionally.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240323173301.151066-2-bugaevc@gmail.com>
On OpenRISC variadic functions and regular functions have different
calling conventions so this wrapper is needed to translate. This
wrapper is copied from x86_64/x32. I don't know the build system enough
to find a cleaner way to share the code between x86_64/x32 and or1k
(maybe Implies?), so I went with the straight copy.
This fixes test failures:
misc/tst-prctl
nptl/tst-setgetname
This test failure:
math/test-fenv
If rounding mode and exception macros are defined then the fenv tests
run and always fail. This patch adds an ifdef using the
__or1k_hard_float__ macro provided by gcc to avoid defining these fenv
macros when they cnnot be used. This is similar to what is done in csky.
Note, I will post the or1k hard-float support soon. So, I prefer to
leave the hard-float bits here for now.
Old Linux kernels disable SVE after every system call. Calling the
SVE-optimized memcpy afterwards will then cause a trap to reenable SVE.
As a result, applications with a high use of syscalls may run slower with
the SVE memcpy. This is true for kernels between 4.15.0 and before 6.2.0,
except for 5.14.0 which was patched. Avoid this by checking the kernel
version and selecting the SVE ifunc on modern kernels.
Parse the kernel version reported by uname() into a 24-bit kernel.major.minor
value without calling any library functions. If uname() is not supported or
if the version format is not recognized, assume the kernel is modern.
Tested-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The following three changes have been added to provide initial Power11 support.
1. Add the directories to hold Power11 files.
2. Add support to select Power11 libraries based on AT_PLATFORM.
3. Let submachine=power11 be set automatically.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
This patch adds a new feature for powerpc. In order to get faster
access to the HWCAP3/HWCAP4 masks, similar to HWCAP/HWCAP2 (i.e. for
implementing __builtin_cpu_supports() in GCC) without the overhead of
reading them from the auxiliary vector, we now reserve space for them
in the TCB.
This is an ABI change for GLIBC 2.39.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
The aarch64 uses 'trad' for traditional tls and 'desc' for tls
descriptors, but unlike other targets it defaults to 'desc'. The
gnutls2 configure check does not set aarch64 as an ABI that uses
TLS descriptors, which then disable somes stests.
Also rename the internal machinery fron gnu2 to tls descriptors.
Checked on aarch64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
ARM _dl_tlsdesc_dynamic slow path has two issues:
* The ip/r12 is defined by AAPCS as a scratch register, and gcc is
used to save the stack pointer before on some function calls. So it
should also be saved/restored as well. It fixes the tst-gnu2-tls2.
* None of the possible VFP registers are saved/restored. ARM has the
additional complexity to have different VFP bank sizes (depending of
VFP support by the chip).
The tst-gnu2-tls2 test is extended to check for VFP registers, although
only for hardfp builds. Different than setcontext, _dl_tlsdesc_dynamic
does not have HWCAP_ARM_IWMMXT (I don't have a way to properly test
it and it is almost a decade since newer hardware was released).
With this patch there is no need to mark tst-gnu2-tls2 as XFAIL.
Checked on arm-linux-gnueabihf.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
_dl_tlsdesc_dynamic preserves RDI, RSI and RBX before realigning stack.
After realigning stack, it saves RCX, RDX, R8, R9, R10 and R11. Define
TLSDESC_CALL_REGISTER_SAVE_AREA to allocate space for RDI, RSI and RBX
to avoid clobbering saved RDI, RSI and RBX values on stack by xsave to
STATE_SAVE_OFFSET(%rsp).
+==================+<- stack frame start aligned at 8 or 16 bytes
| |<- RDI saved in the red zone
| |<- RSI saved in the red zone
| |<- RBX saved in the red zone
| |<- paddings for stack realignment of 64 bytes
|------------------|<- xsave buffer end aligned at 64 bytes
| |<-
| |<-
| |<-
|------------------|<- xsave buffer start at STATE_SAVE_OFFSET(%rsp)
| |<- 8-byte padding for 64-byte alignment
| |<- 8-byte padding for 64-byte alignment
| |<- R11
| |<- R10
| |<- R9
| |<- R8
| |<- RDX
| |<- RCX
+==================+<- RSP aligned at 64 bytes
Define TLSDESC_CALL_REGISTER_SAVE_AREA, the total register save area size
for all integer registers by adding 24 to STATE_SAVE_OFFSET since RDI, RSI
and RBX are saved onto stack without adjusting stack pointer first, using
the red-zone. This fixes BZ #31501.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Originally, nptl/descr.h included <sys/rseq.h>, but we removed that
in commit 2c6b4b272e ("nptl:
Unconditionally use a 32-byte rseq area"). After that, it was
not ensured that the RSEQ_SIG macro was defined during sched_getcpu.c
compilation that provided a definition. This commit always checks
the rseq area for CPU number information before using the other
approaches.
This adds an unnecessary (but well-predictable) branch on
architectures which do not define RSEQ_SIG, but its cost is small
compared to the system call. Most architectures that have vDSO
acceleration for getcpu also have rseq support.
Fixes: 2c6b4b272e
Fixes: 1d350aa060
Reviewed-by: Arjun Shankar <arjun@redhat.com>
Due to GCC bug 110901 -mcpu can override -march setting when compiling
asm code and thus a compiler targetting a specific cpu can fail the
configure check even when binutils gas supports SVE.
The workaround is that explicit .arch directive overrides both -mcpu
and -march, and since that's what the actual SVE memcpy uses the
configure check should use that too even if the GCC issue is fixed
independently.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.8. (There are no new
constants covered by these tests in 6.8 that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 6.8 adds five new syscalls. Update syscall-names.list and
regenerate the arch-syscall.h headers with build-many-glibcs.py
update-syscalls.
Tested with build-many-glibcs.py.
Similar to strstr (1e9a550ba4), power8 strcasestr does not show much
improvement compared to the generic implementation. The geomean
on bench-strcasestr shows:
__strcasestr_power8 __strcasestr_ppc
power10 1159 1120
power9 1640 1469
power8 1787 1904
The strcasestr uses the same 'trick' as power7 strstr to detect
potential quadradic behavior, which only adds overheads for input
that trigger quadradic behavior and it is really a hack.
Checked on powerpc64le-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The memcpy optimization (commit 587a1290a1) has a series
of mistakes:
- The implementation is wrong: the chunk size calculation is wrong
leading to invalid memory access.
- It adds ifunc supports as default, so --disable-multi-arch does
not work as expected for riscv.
- It mixes Linux files (memcpy ifunc selection which requires the
vDSO/syscall mechanism) with generic support (the memcpy
optimization itself).
- There is no __libc_ifunc_impl_list, which makes testing only
check the selected implementation instead of all supported
by the system.
This patch also simplifies the required bits to enable ifunc: there
is no need to memcopy.h; nor to add Linux-specific files.
The __memcpy_noalignment tail handling now uses a branchless strategy
similar to aarch64 (overlap 32-bits copies for sizes 4..7 and byte
copies for size 1..3).
Checked on riscv64 and riscv32 by explicitly enabling the function
on __libc_ifunc_impl_list on qemu-system.
Changes from v1:
* Implement the memcpy in assembly to correctly handle RISCV
strict-alignment.
Reviewed-by: Evan Green <evan@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Each mask in the sigset array is an unsigned long, so fix __sigisemptyset
to use that instead of int. The __sigword function returns a simple array
index, so it can return int instead of unsigned long.
Replace minimum ISA check ifdef conditional with if. Since
MINIMUM_X86_ISA_LEVEL and AVX_X86_ISA_LEVEL are compile time constants,
compiler will perform constant folding optimization, getting same
results.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
For CPU implementations that can perform unaligned accesses with little
or no performance penalty, create a memcpy implementation that does not
bother aligning buffers. It will use a block of integer registers, a
single integer register, and fall back to bytewise copy for the
remainder.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add a little helper method so it's easier to fetch a single value from
the hwprobe function when used within an ifunc selector.
Signed-off-by: Evan Green <evan@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V is apparently the first architecture to pass more than one
argument to ifunc resolvers. The helper macros in libc-symbols.h,
__ifunc_resolver(), __ifunc(), and __ifunc_hidden(), are incompatible
with this. These macros have an "arg" (non-final) parameter that
represents the parameter signature of the ifunc resolver. The result is
an inability to pass the required comma through in a single preprocessor
argument.
Rearrange the __ifunc_resolver() macro to be variadic, and pass the
types as those variable parameters. Move the guts of __ifunc() and
__ifunc_hidden() into new macros, __ifunc_args(), and
__ifunc_args_hidden(), that pass the variable arguments down through to
__ifunc_resolver(). Then redefine __ifunc() and __ifunc_hidden(), which
are used in a bunch of places, to simply shuffle the arguments down into
__ifunc_args[_hidden]. Finally, define a riscv-ifunc.h header, which
provides convenience macros to those looking to write ifunc selectors
that use both arguments.
Signed-off-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The new __riscv_hwprobe() function is designed to be used by ifunc
selector functions. This presents a challenge for applications and
libraries, as ifunc selectors are invoked before all relocations have
been performed, so an external call to __riscv_hwprobe() from an ifunc
selector won't work. To address this, pass a pointer to the
__riscv_hwprobe() function into ifunc selectors as the second
argument (alongside dl_hwcap, which was already being passed).
Include a typedef as well for convenience, so that ifunc users don't
have to go through contortions to call this routine. Users will need to
remember to check the second argument for NULL, to account for older
glibcs that don't pass the function.
Signed-off-by: Evan Green <evan@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The new riscv_hwprobe syscall also comes with a vDSO for faster answers
to your most common questions. Call in today to speak with a kernel
representative near you!
Signed-off-by: Evan Green <evan@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add an INTERNAL_VSYSCALL() macro that makes a vDSO call, falling back to
a regular syscall, but without setting errno. Instead, the return value
is plumbed straight out of the macro.
Signed-off-by: Evan Green <evan@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add awareness and a thin wrapper function around a new Linux system call
that allows callers to get architecture and microarchitecture
information about the CPUs from the kernel. This can be used to
do things like dynamically choose a memcpy implementation.
Signed-off-by: Evan Green <evan@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
_dl_tlsdesc_dynamic should also preserve AMX registers which are
caller-saved. Add X86_XSTATE_TILECFG_ID and X86_XSTATE_TILEDATA_ID
to x86-64 TLSDESC_CALL_STATE_SAVE_MASK. Compute the AMX state size
and save it in xsave_state_full_size which is only used by
_dl_tlsdesc_dynamic_xsave and _dl_tlsdesc_dynamic_xsavec. This fixes
the AMX part of BZ #31372. Tested on AMX processor.
AMX test is enabled only for compilers with the fix for
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=114098
GCC 14 and GCC 11/12/13 branches have the bug fix.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
When strcmp-avx2.S is used as the default, elf/tst-valgrind-smoke fails
with
==1272761== Conditional jump or move depends on uninitialised value(s)
==1272761== at 0x4022C98: strcmp (strcmp-avx2.S:462)
==1272761== by 0x400B05B: _dl_name_match_p (dl-misc.c:75)
==1272761== by 0x40085F3: _dl_map_object (dl-load.c:1966)
==1272761== by 0x401AEA4: map_doit (rtld.c:644)
==1272761== by 0x4001488: _dl_catch_exception (dl-catch.c:237)
==1272761== by 0x40015AE: _dl_catch_error (dl-catch.c:256)
==1272761== by 0x401B38F: do_preload (rtld.c:816)
==1272761== by 0x401C116: handle_preload_list (rtld.c:892)
==1272761== by 0x401EDF5: dl_main (rtld.c:1842)
==1272761== by 0x401A79E: _dl_sysdep_start (dl-sysdep.c:140)
==1272761== by 0x401BEEE: _dl_start_final (rtld.c:494)
==1272761== by 0x401BEEE: _dl_start (rtld.c:581)
==1272761== by 0x401AD87: ??? (in */elf/ld.so)
The assembly codes are:
0x0000000004022c80 <+144>: vmovdqu 0x20(%rdi),%ymm0
0x0000000004022c85 <+149>: vpcmpeqb 0x20(%rsi),%ymm0,%ymm1
0x0000000004022c8a <+154>: vpcmpeqb %ymm0,%ymm15,%ymm2
0x0000000004022c8e <+158>: vpandn %ymm1,%ymm2,%ymm1
0x0000000004022c92 <+162>: vpmovmskb %ymm1,%ecx
0x0000000004022c96 <+166>: inc %ecx
=> 0x0000000004022c98 <+168>: jne 0x4022c32 <strcmp+66>
strcmp-avx2.S has 32-byte vector loads of strings which are shorter than
32 bytes:
(gdb) p (char *) ($rdi + 0x20)
$6 = 0x1ffeffea20 "memcheck-amd64-linux.so"
(gdb) p (char *) ($rsi + 0x20)
$7 = 0x4832640 "core-amd64-linux.so"
(gdb) call (int) strlen ((char *) ($rsi + 0x20))
$8 = 19
(gdb) call (int) strlen ((char *) ($rdi + 0x20))
$9 = 23
(gdb)
It triggers the valgrind error. The above code is safe since the loads
don't cross the page boundary. Update tst-valgrind-smoke.sh to accept
an optional suppression file and pass a suppression file to valgrind when
strcmp-avx2.S is the default implementation of strcmp.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
When glibc is built with ISA level 3 or above enabled, SSE resolvers
aren't available and glibc fails to build:
ld: .../elf/librtld.os: in function `init_cpu_features':
.../elf/../sysdeps/x86/cpu-features.c:1200:(.text+0x1445f): undefined reference to `_dl_runtime_resolve_fxsave'
ld: .../elf/librtld.os: relocation R_X86_64_PC32 against undefined hidden symbol `_dl_runtime_resolve_fxsave' can not be used when making a shared object
/usr/local/bin/ld: final link failed: bad value
For ISA level 3 or above, don't use _dl_runtime_resolve_fxsave nor
_dl_tlsdesc_dynamic_fxsave.
This fixes BZ #31429.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Compiler generates the following instruction sequence for GNU2 dynamic
TLS access:
leaq tls_var@TLSDESC(%rip), %rax
call *tls_var@TLSCALL(%rax)
or
leal tls_var@TLSDESC(%ebx), %eax
call *tls_var@TLSCALL(%eax)
CALL instruction is transparent to compiler which assumes all registers,
except for EFLAGS and RAX/EAX, are unchanged after CALL. When
_dl_tlsdesc_dynamic is called, it calls __tls_get_addr on the slow
path. __tls_get_addr is a normal function which doesn't preserve any
caller-saved registers. _dl_tlsdesc_dynamic saved and restored integer
caller-saved registers, but didn't preserve any other caller-saved
registers. Add _dl_tlsdesc_dynamic IFUNC functions for FNSAVE, FXSAVE,
XSAVE and XSAVEC to save and restore all caller-saved registers. This
fixes BZ #31372.
Add GLRO(dl_x86_64_runtime_resolve) with GLRO(dl_x86_tlsdesc_dynamic)
to optimize elf_machine_runtime_setup.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Instead of tying based on the linker name and version, check for the
required support:
* whether it does not generate dynamic TLS relocations in PIE
(binutils PR ld/22263);
* if it accepts --no-dynamic-linker (by using -static-pie);
* and if it adds a DT_JMPREL pointing to .rela.iplt with static pie.
The patch also trims the comments, for binutils one of the tests should
already cover it. The kernel ones are not clear which version should
have the backport, nor it is something that glibc can do much about
it. Finally, the glibc is somewhat confusing, since it refers
to commits not related to s390x.
Checked with a build for s390x-linux-gnu.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
This includes a fix for big-endian in AdvSIMD log, some cosmetic
changes, and numerous small optimisations mainly around inlining and
using indexed variants of MLA intrinsics.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Starting with commit e57d8fc97b
"S390: Always use svc 0"
clone clobbers the call-saved register r7 in error case:
function or stack is NULL.
This patch restores the saved registers also in the error case.
Furthermore the existing test misc/tst-clone is extended to check
all error cases and that clone does not clobber registers in this
error case.
When glibc is built with ISA level 3 or higher by default, the resulting
glibc binaries won't run on SSE or FMA4 processors. Exclude SSE, AVX and
FMA4 variants in libm multiarch when ISA level 3 or higher is enabled by
default.
When glibc is built with ISA level 2 enabled by default, only keep SSE4.1
variant.
Fixes BZ 31335.
NB: elf/tst-valgrind-smoke test fails with ISA level 4, because valgrind
doesn't support AVX512 instructions:
https://bugs.kde.org/show_bug.cgi?id=383010
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Add APX registers to STATE_SAVE_MASK so that APX registers are saved in
ld.so trampoline. This fixes BZ #31371.
Also update STATE_SAVE_OFFSET and STATE_SAVE_MASK for i386 which will
be used by i386 _dl_tlsdesc_dynamic.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
The optimization is not faster than the generic algorithm,
using the bench-strstr the geometric mean running on a POWER10 machine
using gcc 13.1.1 is 482.47 while the default __strstr_ppc is 340.97
(which uses the generic implementation).
Also, there is no need to redirect the internal str*/mem* call
to optimized version, internal ifunc is supported and enabled
for internal calls (meaning that the generic implementation
will use any asm optimization if available).
Checked on powerpc64le-linux-gnu.
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
The FSR version field is read-only and might be non-zero.
This allows math/test-fpucw* to correctly pass when the version is
non-zero.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit ff026950e2 ("Add a C wrapper for
prctl [BZ #25896]") replaced the assembler wrapper with a C function.
However, on powerpc64le-linux-gnu, the C variadic function
implementation requires extra work in the caller to set up the
parameter save area. Calling a function that needs a parameter save
area without one (because the prototype used indicates the function is
not variadic) corrupts the caller's stack. The Linux manual pages
project documents prctl as a non-variadic function. This has resulted
in various projects over the years using non-variadic prototypes,
including the sanitizer libraries in LLVm and GCC (GCC PR 113728).
This commit switches back to the assembler implementation on most
targets and only keeps the C implementation for x86-64 x32.
Also add the __prctl_time64 alias from commit
b39ffab860 ("Linux: Add time64 alias for
prctl") to sysdeps/unix/sysv/linux/syscalls.list; it was not yet
present in commit ff026950e2.
This restores the old ABI on powerpc64le-linux-gnu, thus fixing
bug 29770.
Reviewed-By: Simon Chopin <simon.chopin@canonical.com>
Before this change, we incorrectly used the SSE2 variant in the
implementation, without checking that the system actually supports
SSE2.
Tested-by: Sam James <sam@gentoo.org>
__builtin_ffs{,ll} basically on __builtin_ctz{,ll} in MIPS GCC compiler.
The hardware ctz instructions were available after MIPS{32,64} Release1. By using builtin ctz. It can also reduce code size of ffs/ffsll.
Checked on mips o32. mips64.
Signed-off-by: Junxian Zhu <zhujunxian@oss.cipunited.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org>
For AMD Zen3+ architecture, the performance of the vectorized loop is
slightly better than ERMS.
Checked on x86_64-linux-gnu on Zen3.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The REP MOVSB usage on memcpy/memmove does not show much performance
improvement on Zen3/Zen4 cores compared to the vectorized loops. Also,
as from BZ 30994, if the source is aligned and the destination is not
the performance can be 20x slower.
The performance difference is noticeable with small buffer sizes, closer
to the lower bounds limits when memcpy/memmove starts to use ERMS. The
performance of REP MOVSB is similar to vectorized instruction on the
size limit (the L2 cache). Also, there is no drawback to multiple cores
sharing the cache.
Checked on x86_64-linux-gnu on Zen3.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Some shadow stack test scripts use the '==' operator with the 'test'
command to validate exit codes resulting in the following error:
sysdeps/x86_64/tst-shstk-legacy-1e.sh: 31: test: 139: unexpected operator
The '==' operator is invalid for the 'test' command, use '-eq' like the
previous call to 'test'.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux 6.7 adds a constant SOL_VSOCK (recall that various constants in
include/linux/socket.h are in fact part of the kernel-userspace API
despite that not being a uapi header). Add it to glibc's
bits/socket.h.
Tested for x86_64.
The commit 49d877a80b (arm: Remove
_dl_skip_args usage) removed the _SKIP_ARGS literal, which was
previously loader to r4 on loader _start. However, the cleanup did not
remove the following 'ldr r4, [sl, r4]' on _dl_start_user, used to check
to skip the arguments after ld self-relocations.
In my testing, the kernel initially set r4 to 0, which makes the
ldr instruction just read the _GLOBAL_OFFSET_TABLE_. However, since r4
is a callee-saved register; a different runtime might not zero
initialize it and thus trigger an invalid memory access.
Checked on arm-linux-gnu.
Reported-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
On LoongArch GCC compiles __builtin_ffs{,ll} to basically
`(x ? __builtin_ctz (x) : -1) + 1`. Since a hardware ctz instruction is
available, this is much better than the table-driven generic
implementation.
Tested on loongarch64.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For o32 we need to setup a minimal stack frame to allow cprestore
on __thread_start_clone3 (which instruct the linker to save the
gp for PIC). Also, there is no guarantee by kABI that $8 will be
preserved after syscall execution, so we need to save it on the
provided stack.
Checked on mipsel-linux-gnu.
Reported-by: Khem Raj <raj.khem@gmail.com>
Tested-by: Khem Raj <raj.khem@gmail.com>
Complete the internal renaming from "C2X" and related names in GCC by
renaming *-c2x and *-gnu2x tests to *-c23 and *-gnu23.
Tested for x86_64, and with build-many-glibcs.py for powerpc64le.
When running the testsuite in parallel, for instance running make -j
$(nproc) check, occasionally tst-epoll fails with a timeout. It happens
because it sometimes takes a bit more than 10ms for the process to get
cloned and blocked by the syscall. In that case the signal is
sent to early, and the test fails with a timeout.
Checked on x86_64-linux-gnu.
WG14 decided to use the name C23 as the informal name of the next
revision of the C standard (notwithstanding the publication date in
2024). Update references to C2X in glibc to use the C23 name.
This is intended to update everything *except* where it involves
renaming files (the changes involving renaming tests are intended to
be done separately). In the case of the _ISOC2X_SOURCE feature test
macro - the only user-visible interface involved - support for that
macro is kept for backwards compatibility, while adding
_ISOC23_SOURCE.
Tested for x86_64.
Starting with commits
- 7ea510127e
string: Add libc_hidden_proto for strchrnul
- 22999b2f0f
string: Add libc_hidden_proto for memrchr
building glibc on s390x with --disable-multi-arch fails if only
the C-variant of strchrnul / memrchr is used. This is the case
if gcc uses -march < z13.
The build fails with:
../sysdeps/s390/strchrnul-c.c:28:49: error: ‘__strchrnul_c’ undeclared here (not in a function); did you mean ‘__strchrnul’?
28 | __hidden_ver1 (__strchrnul_c, __GI___strchrnul, __strchrnul_c);
With --disable-multi-arch, __strchrnul_c is not available as string/strchrnul.c
is just included without defining STRCHRNUL and thus we also don't have to create
the internal hidden symbol.
Tested-by: Andreas K. Hüttel <dilfridge@gentoo.org>
The small counts copy bytes comparsion should be unsigned (as the
memmove size argument). It fixes string/tst-memmove-overflow on
sparcv9, where the input size triggers an invalid code path.
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Similar to sparc32 fix, remove the unwind information on the signal
return stubs. This fixes the regressions:
FAIL: nptl/tst-cancel24-static
FAIL: nptl/tst-cond8-static
FAIL: nptl/tst-mutex8-static
FAIL: nptl/tst-mutexpi8-static
FAIL: nptl/tst-mutexpi9
On sparc64-linux-gnu.
The FPU used by LEON does not preserve NaN payload. This change allows
the math/test-*-canonicalize tests to pass on LEON.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the math_force_eval() macro to force the calculation to complete and
raise the exception.
With this change the math/test-fenv test pass.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Conversions from a float to a long long on SPARC v8 uses a libgcc function
that may not raise the correct exceptions on overflow. It also may raise
spurious "inexact" exceptions on non overflow cases. This patch fixes the
problem in the same way as for RV32.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The functions were previously written in C, but were not compiled
with unwind information. The ENTRY/END macros includes .cfi_startproc
and .cfi_endproc which adds unwind information. This caused the
tests cleanup-8 and cleanup-10 in the GCC testsuite to fail.
This patch adds a version of the ENTRY/END macros without the
CFI instructions that can be used instead.
sigaction registers a restorer address that is located two instructions
before the stub function. This patch adds a two instruction padding to
avoid that the unwinder accesses the unwind information from the function
that the linker has placed right before it in memory. This fixes an issue
with pthread_cancel that caused tst-mutex8-static (and other tests) to fail.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On LEON, if the stfsr instruction is immediately following a floating-point
operation instruction in a running program, with no other instruction in
between the two, the stfsr might behave as if the order was reversed
between the two instructions and the stfsr occurred before the
floating-point operation.
Add a nop instruction before the stfsr to prevent this from happening.
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Macros for using inline assembly to access the fp state register exists
in both fenv_private.h and in fpu_control.h. Let fenv_private.h use the
macros from fpu_control.h
Signed-off-by: Daniel Cederman <cederman@gaisler.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.7. (There are no new
constants covered by these tests in 6.7 that need any other header
changes.)
Tested with build-many-glibcs.py.
Linux 6.7 adds the futex_requeue, futex_wait and futex_wake syscalls,
and enables map_shadow_stack for architectures previously missing it.
Update syscall-names.list and regenerate the arch-syscall.h headers
with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Systemd execution environment configuration may prohibit changing a memory
mapping to become executable:
MemoryDenyWriteExecute=
Takes a boolean argument. If set, attempts to create memory mappings
that are writable and executable at the same time, or to change existing
memory mappings to become executable, or mapping shared memory segments
as executable, are prohibited.
When it is set, systemd service stops working if PLT rewrite is enabled.
Check if mprotect works before rewriting PLT. This fixes BZ #31230.
This also works with SELinux when deny_execmem is on.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Ffsll function randomly regress by ~20%, depending on how code gets
aligned in memory. Ffsll function code size is 17 bytes. Since default
function alignment is 16 bytes, it can load on 16, 32, 48 or 64 bytes
aligned memory. When ffsll function load at 16, 32 or 64 bytes aligned
memory, entire code fits in single 64 bytes cache line. When ffsll
function load at 48 bytes aligned memory, it splits in two cache line,
hence random regression.
Ffsll function size reduction from 17 bytes to 12 bytes ensures that it
will always fit in single 64 bytes cache line.
This patch fixes ffsll function random performance regression.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch referents the commit 374cef3 to add static-pie support. And
because the dummy link map is used when relocating ourselves, so need
not to set __global_pointer$ at this time.
It will also check whether toolchain supports to build static-pie.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The 551101e824 change is incorrect for
alpha and sparc, since __NR_stat is defined by both kABI. Use
__NR_newfstat to check whether to fallback to __NR_fstat64 (similar
to what fstatat64 does).
Checked on sparc64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Remove the error handling wrapper from exp10. This is very similar to
the changes done to exp and exp2, except that we also need to handle
pow10 and pow10l.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The __getrandom_nocancel function returns errors as negative values
instead of errno. This is inconsistent with other _nocancel functions
and it breaks "TEMP_FAILURE_RETRY (__getrandom_nocancel (p, n, 0))" in
__arc4random_buf. Use INLINE_SYSCALL_CALL instead of
INTERNAL_SYSCALL_CALL to fix this issue.
But __getrandom_nocancel has been avoiding from touching errno for a
reason, see BZ 29624. So add a __getrandom_nocancel_nostatus function
and use it in tcache_key_initialize.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
CET feature bits in TCB, which are Linux specific, are used to check if
CET features are active. Move CET feature check to Linux/x86 directory.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
1. Remove _dl_runtime_resolve_shstk and _dl_runtime_profile_shstk.
2. Move CET offsets from x86 cpu-features-offsets.sym to x86-64
features-offsets.sym.
3. Rename x86 cet-control.h to x86-64 feature-control.h since it is only
for x86-64 and also used for PLT rewrite.
4. Add x86-64 ldsodefs.h to include feature-control.h.
5. Change TUNABLE_CALLBACK (set_plt_rewrite) to x86-64 only.
6. Move x86 dl-procruntime.c to x86-64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Move sysdeps/x86/libc-start.h to sysdeps/x86_64/libc-start.h and use
sysdeps/generic/libc-start.h for i386.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
CET is only support for x86_64, this patch reverts:
- faaee1f07e x86: Support shadow stack pointer in setjmp/longjmp.
- be9ccd27c0 i386: Add _CET_ENDBR to indirect jump targets in
add_n.S/sub_n.S
- c02695d776 x86/CET: Update vfork to prevent child return
- 5d844e1b72 i386: Enable CET support in ucontext functions
- 124bcde683 x86: Add _CET_ENDBR to functions in crti.S
- 562837c002 x86: Add _CET_ENDBR to functions in dl-tlsdesc.S
- f753fa7dea x86: Support IBT and SHSTK in Intel CET [BZ #21598]
- 825b58f3fb i386-mcount.S: Add _CET_ENDBR to _mcount and __fentry__
- 7e119cd582 i386: Use _CET_NOTRACK in i686/memcmp.S
- 177824e232 i386: Use _CET_NOTRACK in memcmp-sse4.S
- 0a899af097 i386: Use _CET_NOTRACK in memcpy-ssse3-rep.S
- 7fb613361c i386: Use _CET_NOTRACK in memcpy-ssse3.S
- 77a8ae0948 i386: Use _CET_NOTRACK in memset-sse2-rep.S
- 00e7b76a8f i386: Use _CET_NOTRACK in memset-sse2.S
- 90d15dc577 i386: Use _CET_NOTRACK in strcat-sse2.S
- f1574581c7 i386: Use _CET_NOTRACK in strcpy-sse2.S
- 4031d7484a i386/sub_n.S: Add a missing _CET_ENDBR to indirect jump
- target
-
Checked on i686-linux-gnu.
The CET is only supported for x86_64 and there is no plan to add
kernel support for i386. Move the Makefile rules and files from the
generic x86 folder to x86_64 one.
Checked on x86_64-linux-gnu and i686-linux-gnu.
PLT rewrite calculated displacement with
ElfW(Addr) disp = value - branch_start - JMP32_INSN_SIZE;
On x32, displacement from 0xf7fbe060 to 0x401030 was calculated as
unsigned int disp = 0x401030 - 0xf7fbe060 - 5;
with disp == 0x8442fcb and caused displacement overflow. The PLT entry
was changed to:
0xf7fbe060 <+0>: e9 cb 2f 44 08 jmp 0x401030
0xf7fbe065 <+5>: cc int3
0xf7fbe066 <+6>: cc int3
0xf7fbe067 <+7>: cc int3
0xf7fbe068 <+8>: cc int3
0xf7fbe069 <+9>: cc int3
0xf7fbe06a <+10>: cc int3
0xf7fbe06b <+11>: cc int3
0xf7fbe06c <+12>: cc int3
0xf7fbe06d <+13>: cc int3
0xf7fbe06e <+14>: cc int3
0xf7fbe06f <+15>: cc int3
x32 has 32-bit address range, but it doesn't wrap address around at 4GB,
JMP target was changed to 0x100401030 (0xf7fbe060LL + 0x8442fcbLL + 5),
which is above 4GB.
Always use uint64_t to calculate displacement. This fixes BZ #31218.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Add ELF_DYNAMIC_AFTER_RELOC to allow target specific processing after
relocation.
For x86-64, add
#define DT_X86_64_PLT (DT_LOPROC + 0)
#define DT_X86_64_PLTSZ (DT_LOPROC + 1)
#define DT_X86_64_PLTENT (DT_LOPROC + 3)
1. DT_X86_64_PLT: The address of the procedure linkage table.
2. DT_X86_64_PLTSZ: The total size, in bytes, of the procedure linkage
table.
3. DT_X86_64_PLTENT: The size, in bytes, of a procedure linkage table
entry.
With the r_addend field of the R_X86_64_JUMP_SLOT relocation set to the
memory offset of the indirect branch instruction.
Define ELF_DYNAMIC_AFTER_RELOC for x86-64 to rewrite the PLT section
with direct branch after relocation when the lazy binding is disabled.
PLT rewrite is disabled by default since SELinux may disallow modifying
code pages and ld.so can't detect it in all cases. Use
$ export GLIBC_TUNABLES=glibc.cpu.plt_rewrite=1
to enable PLT rewrite with 32-bit direct jump at run-time or
$ export GLIBC_TUNABLES=glibc.cpu.plt_rewrite=2
to enable PLT rewrite with 32-bit direct jump and on APX processors with
64-bit absolute jump at run-time.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
These describe generic AArch64 CPU features, and are not tied to a
kernel-specific way of determining them. We can share them between
the Linux and Hurd AArch64 ports.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240103171502.1358371-13-bugaevc@gmail.com>
We fetch __vm_page_size as the very first RPC that we do, inside
__mach_init (). Propagate that to _dl_pagesize ASAP after that,
before any other initialization.
In dynamic builds, this is already done immediately after
__mach_init (), inside _dl_sysdep_start ().
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240103171502.1358371-12-bugaevc@gmail.com>
This is the case on both x86 architectures, but not on AArch64.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240103171502.1358371-11-bugaevc@gmail.com>
We already have the RETURN_TO macro for this exact use case, and it's already
used in the non-static code path. Use it here too.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240103171502.1358371-9-bugaevc@gmail.com>
Instead of relying on the stack frame layout to figure out where the stack
pointer was prior to the _hurd_stack_setup () call, just pass the pointer
as an argument explicitly. This is less brittle and much more portable.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-ID: <20240103171502.1358371-8-bugaevc@gmail.com>
setcontext and swapcontext put a restore token on the old shadow stack
which is used to restore the target shadow stack when switching user
contexts. When longjmp from a user context, the target shadow stack
can be different from the current shadow stack and INCSSP can't be
used to restore the shadow stack pointer to the target shadow stack.
Update longjmp to search for a restore token. If found, use the token
to restore the shadow stack pointer before using INCSSP to pop the
shadow stack. Stop the token search and use INCSSP if the shadow stack
entry value is the same as the current shadow stack pointer.
It is a user error if there is a shadow stack switch without leaving a
restore token on the old shadow stack.
The only difference between __longjmp.S and __longjmp_chk.S is that
__longjmp_chk.S has a check for invalid longjmp usages. Merge
__longjmp.S and __longjmp_chk.S by adding the CHECK_INVALID_LONGJMP
macro.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Since shadow stack is only supported for x86-64, ignore --enable-cet for
i386. Always setting $(enable-cet) for i386 to "no" to support
ifneq ($(enable-cet),no)
in x86 Makefiles. We can't use
ifeq ($(enable-cet),yes)
since $(enable-cet) can be "yes", "no" or "permissive".
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
C23 adds a header <stdbit.h> with various functions and type-generic
macros for bit-manipulation of unsigned integers (plus macro defines
related to endianness). Implement this header for glibc.
The functions have both inline definitions in the header (referenced
by macros defined in the header) and copies with external linkage in
the library (which are implemented in terms of those macros to avoid
duplication). They are documented in the glibc manual. Tests, as
well as verifying results for various inputs (of both the macros and
the out-of-line functions), verify the types of those results (which
showed up a bug in an earlier version with the type-generic macro
stdc_has_single_bit wrongly returning a promoted type), that the
macros can be used at top level in a source file (so don't use ({})),
that they evaluate their arguments exactly once, and that the macros
for the type-specific functions have the expected implicit conversions
to the relevant argument type.
Jakub previously referred to -Wconversion warnings in type-generic
macros, so I've included a test with -Wconversion (but the only
warnings I saw and fixed from that test were actually in inline
functions in the <stdbit.h> header - not anything coming from use of
the type-generic macros themselves).
This implementation of the type-generic macros does not handle
unsigned __int128, or unsigned _BitInt types with a width other than
that of a standard integer type (and C23 doesn't require the header to
handle such types either). Support for those types, using the new
type-generic built-in functions Jakub's added for GCC 14, can
reasonably be added in a followup (along of course with associated
tests).
This implementation doesn't do anything special to handle C++, or have
any tests of functionality in C++ beyond the existing tests that all
headers can be compiled in C++ code; it's not clear exactly what form
this header should take in C++, but probably not one using macros.
DIS ballot comment AT-107 asks for the word "count" to be added to the
names of the stdc_leading_zeros, stdc_leading_ones,
stdc_trailing_zeros and stdc_trailing_ones functions and macros. I
don't think it's likely to be accepted (accepting any technical
comments would mean having an FDIS ballot), but if it is accepted at
the WG14 meeting (22-26 January in Strasbourg, starting with DIS
ballot comment handling) then there would still be time to update
glibc for the renaming before the 2.39 release.
The new functions and header are placed in the stdlib/ directory in
glibc, rather than creating a new toplevel stdbit/ or putting them in
string/ alongside ffs.
Tested for x86_64 and x86.
Includes test for setcontext too.
The test directly checks after longjmp if ZA got disabled and the
ZA contents got saved following the lazy saving scheme. It does not
use ACLE code to verify that gcc can interoperate with glibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For the ZA lazy saving scheme to work, setcontext has to call
__libc_arm_za_disable.
Also fixes swapcontext which uses setcontext internally.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
For the ZA lazy saving scheme to work, longjmp has to call
__libc_arm_za_disable.
In ld.so we assume ZA is not used so longjmp does not need
special support there.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The runtime support routines for the call ABI of the Scalable Matrix
Extension (SME) are mostly in libgcc. Since libc.so cannot depend on
libgcc_s.so have an implementation of __arm_za_disable in libc for
libc internal use in longjmp and similar APIs.
__libc_arm_za_disable follows the same PCS rules as __arm_za_disable,
but it's a hidden symbol so it does not need variant PCS marking.
Using __libc_fatal instead of abort because it can print a message and
works in ld.so too. But for now we don't need SME routines in ld.so.
To check the SME HWCAP in asm, we need the _dl_hwcap2 member offset in
_rtld_global_ro in the shared libc.so, while in libc.a the _dl_hwcap2
object is accessed.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When shadow stack is enabled, some CET tests failed when compiled with
GCC 14:
FAIL: elf/tst-cet-legacy-4
FAIL: elf/tst-cet-legacy-5a
FAIL: elf/tst-cet-legacy-6a
which are caused by
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113039
These tests use -fcf-protection -fcf-protection=branch and assume that
-fcf-protection=branch will override -fcf-protection. But this GCC 14
commit:
https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=1c6231c05bdcca
changed the -fcf-protection behavior such that
-fcf-protection -fcf-protection=branch
is treated the same as
-fcf-protection
Use
-fcf-protection -fcf-protection=none -fcf-protection=branch
as the workaround. This fixes BZ #31187.
Tested with GCC 13 and GCC 14 on Intel Tiger Lake.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Not all CET enabled applications and libraries have been properly tested
in CET enabled environments. Some CET enabled applications or libraries
will crash or misbehave when CET is enabled. Don't set CET active by
default so that all applications and libraries will run normally regardless
of whether CET is active or not. Shadow stack can be enabled by
$ export GLIBC_TUNABLES=glibc.cpu.hwcaps=SHSTK
at run-time if shadow stack can be enabled by kernel.
NB: This commit can be reverted if it is OK to enable CET by default for
all applications and libraries.
Initially, IBT and SHSTK are marked as active when CPU supports them
and CET are enabled in glibc. They can be disabled early by tunables
before relocation. Since after relocation, GLRO(dl_x86_cpu_features)
becomes read-only, we can't update GLRO(dl_x86_cpu_features) to mark
IBT and SHSTK as inactive. Instead, check the feature_1 field in TCB
to decide if IBT and SHST are active.
Previously, CET was enabled by kernel before passing control to user
space and the startup code must disable CET if applications or shared
libraries aren't CET enabled. Since the current kernel only supports
shadow stack and won't enable shadow stack before passing control to
user space, we need to enable shadow stack during startup if the
application and all shared library are shadow stack enabled. There
is no need to disable shadow stack at startup. Shadow stack can only
be enabled in a function which will never return. Otherwise, shadow
stack will underflow at the function return.
1. GL(dl_x86_feature_1) is set to the CET features which are supported
by the processor and are not disabled by the tunable. Only non-zero
features in GL(dl_x86_feature_1) should be enabled. After enabling
shadow stack with ARCH_SHSTK_ENABLE, ARCH_SHSTK_STATUS is used to check
if shadow stack is really enabled.
2. Use ARCH_SHSTK_ENABLE in RTLD_START in dynamic executable. It is
safe since RTLD_START never returns.
3. Call arch_prctl (ARCH_SHSTK_ENABLE) from ARCH_SETUP_TLS in static
executable. Since the start function using ARCH_SETUP_TLS never returns,
it is safe to enable shadow stack in ARCH_SETUP_TLS.
Sync with Linux kernel 6.6 shadow stack interface. Since only x86-64 is
supported, i386 shadow stack codes are unchanged and CET shouldn't be
enabled for i386.
1. When the shadow stack base in TCB is unset, the default shadow stack
is in use. Use the current shadow stack pointer as the marker for the
default shadow stack. It is used to identify if the current shadow stack
is the same as the target shadow stack when switching ucontexts. If yes,
INCSSP will be used to unwind shadow stack. Otherwise, shadow stack
restore token will be used.
2. Allocate shadow stack with the map_shadow_stack syscall. Since there
is no function to explicitly release ucontext, there is no place to
release shadow stack allocated by map_shadow_stack in ucontext functions.
Such shadow stacks will be leaked.
3. Rename arch_prctl CET commands to ARCH_SHSTK_XXX.
4. Rewrite the CET control functions with the current kernel shadow stack
interface.
Since CET is no longer enabled by kernel, a separate patch will enable
shadow stack during startup.
Code is mostly inspired from the LoongArch one, which has a similar ABI,
with minor changes to support riscv32 and register differences.
This fixes elf/tst-sprof-basic. This also fixes elf/tst-audit1,
elf/tst-audit2 and elf/tst-audit8 with recent binutils snapshots when
--enable-bind-now is used.
Resolves: BZ #31151
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
_dl_tlsdesc_undefweak and _dl_tlsdesc_dynamic access the thread pointer
via the tcb field in TCB:
_dl_tlsdesc_undefweak:
_CET_ENDBR
movq 8(%rax), %rax
subq %fs:0, %rax
ret
_dl_tlsdesc_dynamic:
...
subq %fs:0, %rax
movq -8(%rsp), %rdi
ret
Since the tcb field in TCB is a pointer, %fs:0 is a 32-bit location,
not 64-bit. It should use "sub %fs:0, %RAX_LP" instead. Since
_dl_tlsdesc_undefweak returns ptrdiff_t and _dl_make_tlsdesc_dynamic
returns void *, RAX_LP is appropriate here for x32 and x86-64. This
fixes BZ #31185.
On x32, I got
FAIL: elf/tst-tlsgap
$ gdb elf/tst-tlsgap
...
open tst-tlsgap-mod1.so
Thread 2 "tst-tlsgap" received signal SIGSEGV, Segmentation fault.
[Switching to LWP 2268754]
_dl_tlsdesc_dynamic () at ../sysdeps/x86_64/dl-tlsdesc.S:108
108 movq (%rsi), %rax
(gdb) p/x $rsi
$4 = 0xf7dbf9005655fb18
(gdb)
This is caused by
_dl_tlsdesc_dynamic:
_CET_ENDBR
/* Preserve call-clobbered registers that we modify.
We need two scratch regs anyway. */
movq %rsi, -16(%rsp)
movq %fs:DTV_OFFSET, %rsi
Since the dtv field in TCB is a pointer, %fs:DTV_OFFSET is a 32-bit
location, not 64-bit. Load the dtv field to RSI_LP instead of rsi.
This fixes BZ #31184.
In permissive mode, don't disable IBT nor SHSTK when dlopening a legacy
shared library if not single threaded since IBT and SHSTK may be still
enabled in other threads. Other threads with IBT or SHSTK enabled will
crash when calling functions in the legacy shared library. Instead, an
error will be issued.
Improve readability and make maintenance easier for dl-feature.c by
modularizing sysdeps/x86/dl-cet.c:
1. Support processors with:
a. Only IBT. Or
b. Only SHSTK. Or
c. Both IBT and SHSTK.
2. Lock CET features only if IBT or SHSTK are enabled and are not
enabled permissively.
Added annotations for autovec by GCC and GFortran - this enables GCC
>= 9 to autovectorise math calls at -Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Compilers may emit calls to 'half-width' routines (two-lane
single-precision variants). These have been added in the form of
wrappers around the full-width versions, where the low half of the
vector is simply duplicated. This will perform poorly when one lane
triggers the special-case handler, as there will be a redundant call
to the scalar version, however this is expected to be rare at Ofast.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
The expression
(excepts & FE_ALL_EXCEPT) << 27
produces a signed integer overflow when 'excepts' is specified as
FE_INVALID (= 0x10), because
- excepts is of type 'int',
- FE_ALL_EXCEPT is of type 'int',
- thus (excepts & FE_ALL_EXCEPT) is (int) 0x10,
- 'int' is 32 bits wide.
The patched code produces the same instruction sequence as
previosuly.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It clears some exception flags that are outside the EXCEPTS argument.
It fixes math/test-fexcept on qemu-user.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
libc_feupdateenv_riscv should check for FE_DFL_ENV, similar to
libc_fesetenv_riscv.
Also extend the test-fenv.c to test fenvupdate.
Checked on riscv under qemu-system.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
