When sending render nodes from the client to the daemon we add an id,
and whenever we're about to re-send the entire tree node we instead
send the old id. We track all the nodes for the previous frame
of the surface this way.
Having the id on the daemon side will allow us do to much better deltas.
gsk/gskenums.h:181: Error: Gsk: multiple "@GSK_TRANSFORM_CATEGORY_2D" parameters for identifier "GskTransformCategory":
* @GSK_TRANSFORM_CATEGORY_2D: The matrix is a 2D matrix. This is equivalent
^
gsk/gsktransform.c:1342: Warning: Gsk: gsk_transform_to_2d: unknown parameter 'm' in documentation comment, should be 'self'
gsk/gsktransform.c:1368: Warning: Gsk: gsk_transform_to_2d: invalid return annotation
gsk/gsktransform.c:1461: Warning: Gsk: gsk_transform_to_translate: unknown parameter 'm' in documentation comment, should be 'self'
This reinstates diffing in the same way that it worked for offset nodes.
It would be possible to add diffing for affine transforms or even all
transforms, but I think this is unnecessary right now - and also quite
expensive to compute.
Make the API expect a tranform of the proper category instead of
doing the check ourselves and returning TRUE/FALSE.
The benefit is that the mai use case is switch (transform->category)
statements and in those we know the category and don't need to check
TRUE/FALSE.
Using the wrong matrix will now cause a g_warning().
... instead of computing it every time we need it.
This should be faster and we want to use it a lot more prominently.
Also, we have the struct memory available anyway.
In particular, add a per-category querying API for the matrix:
- gsk_transform_to_translate()
- gsk_transform_to_affine()
- gsk_transform_to_2d()
- gsk_transform_to_matrix()
This way, code can use the relevant one for the given category.
Since we can do partial redraws, dropping every shadow that's been
unused for one frame happens too fast. This is also a problem when a
shadow gets drawn on a texture for a few frames.
This can happen for certain transform nodes. The transform node's
child's bounds are fine, but the transform node bounds are all nan.
Just ignore those bounds since we can't meaningfully render them anyway.
If the given matrix is explicitly of category IDENTITY, we don't need to
do anything, and in the 2D_TRANSLATE case, just offset the child bounds.
Those are the two most common cases.
The code didn't change, it was just shuffled around to make the
with_bounds() versions of the text rendering unnecessary and instead
pass through the generic append_node() path.
They were a neat idea while they lasted. But now, it's time for
categorized transform nodes, where matrices with
GSK_MATRIX_CATEGORY_2D_TRANSLATE are the exact replacement.
Renderers have not been adapted for this purpose, so they (continue to)
run slow paths.
The first set of glyphs is created with a timestamp of 1. Later we
subtract the glyph timestamp from the cache timestamp, meaning we end up
with numbers ending in 9, e.g. 59. Now unfortunately !(60 <= 59), so we
do not end up incrasing the old_pixels count of the cache. Later we then
call lookup() and DEcrease the old_pixels count, which makes the
unsigned int wrap and cause a huge old_pixels value, which causes us to
drop the cache.
The @filename@ directive will use the full path of the file being parsed
for enumeration types; we should use @basename@, instead, as it improves
the reproducibility of the build by using only the file name.
Some of the flags got lost in the meson transition or were demoted from
error flags to warning flags.
This commit reintroduces them.
It also includes fixes for the code that had warnings with those flags.
The big one being -Wshadow.
This broke the overlay blur demoe when resizing the window to a size
that would completely move the image below a button, causing the
GtkSnapshot code to remove the clip node below the blur node.
So we can check that the currently set clip is the first one and now
intersect with it. This first clip is always the entire viewport or the
entire render_area and we don't want to end up drawing things to a
texture because of it.
Instead of getting the translation x/y everytime we use the modelview,
get it once, when extracting the metadata. Do the same with the scale.
And save if the matrix is "simple" at all, i.e. if it only consists of a
translation and/or scale. This will be helpful later when we start
drawing transformed nodes on textures.
We do this for every single node, which is a little costly, especially
since the common case for the modelview matrix these days is a simple
translation. So, check whether the new modelview matrix is only a
translation matrix and if so, don't do a full matrix multiplication per
node.
Some of the _diff implementations did a whole bunch of work just to
throw it away afterwards and invalidate the entire union of the two
render nodes, most notably the two clip nodes. Fix this to only call
gsk_render_node_diff_impossible if the previous if-condition is FALSE
and not always.
This reverts commit 8e74eb382f.
This code is not necessary. It worked around a bug in graphene where
graphene was requiring stricter alignment than glib allocators could
guarantee.
Any data that is later fed to graphene must be
allocated with proper alignment, if graphene
uses SSE2 or GCC vector instructions.
This adds custom array code (a streamlined copy
of GArray with all unnecessary bells and whistles removed),
which is then used for the state_stack instead of GArray.
There's also a runtime check for the size of GtkSnapshotState
itself being a multiple of 16. If that is not so, any array
elements past the 0th element will lose alignment.
There are probably struct attributes that can
make GtkSnapshotState always have size that is a multiple
of 16, but we'll burn that bridge if we cross it.
The code is mostly stolen from graphene.
Allocators support any alignment, but their implementation
only calls system aligned allocator functions if malloc()
is not aligned to 16-byte boundaries. If it is aligned,
the implementation just calls malloc() regardless of which
alignment is requested by the caller.
This can be fixed by saving the result of meson malloc()
alignment check and adding a few conditions to the implementation,
but right now GSK and GTK only need 16-byte alignment either way.
1. Include the broadway renderer (so we can test it properly fails on
Wayland or X11)
2. List all potential renderers, print useful information when Vulkan
is not compiled in instea dof omitting it
3. Improve docs
As they require a draw context and the draw context is already bound to
the surface, it makes much more sense and reduces abiguity by moving
these APIs to the draw context.
As a side effect, we simplify GdkSurface APIs to a point where
GdkSurface now does not concern itself with drawing anymore at all,
apart from being the object that creates draw contexts.
Previously, we got the damage, then computed the changed area, then
started a frame with that changed area.
But starting a frame computes the damage for us.
So now we start a frame, then get the damage area from that, then
compute the change area.
This does nothing but disallow passing NULL to gdk_surface_begin_paint()
and instead require this context.
The ultimate goal is to split out Cairo drawing into its own source file
so it doesn't clutter up the generic rendering path.
And of course, gsk_render_node_get_name() is gone, too.
The replacement is of course debug nodes.
As a side effect, GskRenderNode is now *really* immutable.
We pulled out the bounds calculation for performance reasons, but the
caller can't know how to properly compute them. Inside gtk+, we can do
that but it's not good enough for public API.
When the max cost for finding a path gets to high, the diff can now be
aborted.
Because render nodes have a fallback method (by just marking the whole
bounds of the nodes as different), we use this to improve performance
of diffs.
This brings fishbowl (which is basically a container node with N images
that change every frame) back to close to previous performance.
Now that we have the full render nodes available, there is not much
benefit in fine-grained control over multiple rectangles.
In particular, it's causing pain with complex regions.
There might be a benefit in clipping to the region's rectangles in cases
like widget-factory where the whole diff is made up of the 2 rectangles
of spinner and the pulsing progress bar, but it needs a good heuristic
for where this is useful.
... and diff the previous node with the current one to determine the
clip region.
This doubles the work necessary to track clip regions, but the following
commits will clean that up.
It doesn't need to be exported anymore.
As a side effect, the inspector no longer has any information about the
render region, so remove the code that was taking care of that.
This includes a copy of the diff(1) algorithm used by git diff by Davide
Libenzi.
It's used for the common case ofcontainer nodes having only very few
changes for the few nodes of child widgets that changed (like a button
lighting up when hilighted or a spinning spinner).
... and gsk_render_node_can_diff(). Those are vfuncs to compute a region
containing all the pixels that differ between the two nodes.
This is just the plumbing that chains into node classes. No node
implements it yet.
Adding the offset node broke serialization in 2 ways:
1. We store the enum value in the node, so make sure to not change it
for existing values
2. The offset node was missing in the deserialization lookup table
This is a special case of the transform node that does a 2D translation.
The implementation in the Vulkan and GL renderers is crude and just does
the same as the transform node.
Nothing uses that node yet.
This way, we can postpone the actual rendeing of the node until the
renderer. This allows the renderer to choose the right scale to
render at, so it can decide to use 2x scale for hidpi on its own.
Last but not least, it makes all nodes independent of the context they
are created in, because they do not need to know at snapshot time what
they will ultimately be rendered into.
This is an automatic rename of various things related
to the window->surface rename.
Public symbols changed by this is:
GDK_MODE_WINDOW
gdk_device_get_window_at_position
gdk_device_get_window_at_position_double
gdk_device_get_last_event_window
gdk_display_get_monitor_at_window
gdk_drag_context_get_source_window
gdk_drag_context_get_dest_window
gdk_drag_context_get_drag_window
gdk_draw_context_get_window
gdk_drawing_context_get_window
gdk_gl_context_get_window
gdk_synthesize_window_state
gdk_surface_get_window_type
gdk_x11_display_set_window_scale
gsk_renderer_new_for_window
gsk_renderer_get_window
gtk_text_view_buffer_to_window_coords
gtk_tree_view_convert_widget_to_bin_window_coords
gtk_tree_view_convert_tree_to_bin_window_coords
The commands that generated this are:
git sed -f g "GDK window" "GDK surface"
git sed -f g window_impl surface_impl
(cd gdk; git sed -f g impl_window impl_surface)
git sed -f g WINDOW_IMPL SURFACE_IMPL
git sed -f g GDK_MODE_WINDOW GDK_MODE_SURFACE
git sed -f g gdk_draw_context_get_window gdk_draw_context_get_surface
git sed -f g gdk_drawing_context_get_window gdk_drawing_context_get_surface
git sed -f g gdk_gl_context_get_window gdk_gl_context_get_surface
git sed -f g gsk_renderer_get_window gsk_renderer_get_surface
git sed -f g gsk_renderer_new_for_window gsk_renderer_new_for_surface
(cd gdk; git sed -f g window_type surface_type)
git sed -f g gdk_surface_get_window_type gdk_surface_get_surface_type
git sed -f g window_at_position surface_at_position
git sed -f g event_window event_surface
git sed -f g window_coord surface_coord
git sed -f g window_state surface_state
git sed -f g window_cursor surface_cursor
git sed -f g window_scale surface_scale
git sed -f g window_events surface_events
git sed -f g monitor_at_window monitor_at_surface
git sed -f g window_under_pointer surface_under_pointer
(cd gdk; git sed -f g for_window for_surface)
git sed -f g window_anchor surface_anchor
git sed -f g WINDOW_IS_TOPLEVEL SURFACE_IS_TOPLEVEL
git sed -f g native_window native_surface
git sed -f g source_window source_surface
git sed -f g dest_window dest_surface
git sed -f g drag_window drag_surface
git sed -f g input_window input_surface
git checkout NEWS* po-properties po docs/reference/gtk/migrating-3to4.xml
This renames the GdkWindow class and related classes (impl, backend
subclasses) to surface. Additionally it renames related types:
GdkWindowAttr, GdkWindowPaint, GdkWindowWindowClass, GdkWindowType,
GdkWindowTypeHint, GdkWindowHints, GdkWindowState, GdkWindowEdge
This is an automatic conversion using the below commands:
git sed -f g GdkWindowWindowClass GdkSurfaceSurfaceClass
git sed -f g GdkWindow GdkSurface
git sed -f g "gdk_window\([ _\(\),;]\|$\)" "gdk_surface\1" # Avoid hitting gdk_windowing
git sed -f g "GDK_WINDOW\([ _\(]\|$\)" "GDK_SURFACE\1" # Avoid hitting GDK_WINDOWING
git sed "GDK_\([A-Z]*\)IS_WINDOW\([_ (]\|$\)" "GDK_\1IS_SURFACE\2"
git sed GDK_TYPE_WINDOW GDK_TYPE_SURFACE
git sed -f g GdkPointerWindowInfo GdkPointerSurfaceInfo
git sed -f g "BROADWAY_WINDOW" "BROADWAY_SURFACE"
git sed -f g "broadway_window" "broadway_surface"
git sed -f g "BroadwayWindow" "BroadwaySurface"
git sed -f g "WAYLAND_WINDOW" "WAYLAND_SURFACE"
git sed -f g "wayland_window" "wayland_surface"
git sed -f g "WaylandWindow" "WaylandSurface"
git sed -f g "X11_WINDOW" "X11_SURFACE"
git sed -f g "x11_window" "x11_surface"
git sed -f g "X11Window" "X11Surface"
git sed -f g "WIN32_WINDOW" "WIN32_SURFACE"
git sed -f g "win32_window" "win32_surface"
git sed -f g "Win32Window" "Win32Surface"
git sed -f g "QUARTZ_WINDOW" "QUARTZ_SURFACE"
git sed -f g "quartz_window" "quartz_surface"
git sed -f g "QuartzWindow" "QuartzSurface"
git checkout NEWS* po-properties
And then clip the texture using the current (maybe also rounded) clip.
This way, the result is correct. We don't necessarily have to do the
offscreen drawing in any case, but got the safe route for now.
Put GdkGLTexture into its own file and rename the API to
gdk_gl_texture_foo() instead of gdk_texture_foo_for_gl().
Apart from naming, no actual code changes.
An alternative GskTextNode constructor that does no text measuring. That
way, we can measure the text before and check if the node will be
outside of the current clip anyway.
