For a * b with only truncated word32 uses (or result known to be in
signed32 range), we can use Int32Mul if we know for sure that the
intermediate result is inside the safe integer range, and a and b are
in signed32 range.
Drive-by-fix: Also use TypeCache in SimplifiedLowering.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1478953002
Cr-Commit-Position: refs/heads/master@{#32330}
Reason for revert:
Unexpected error occurred.
Original issue's description:
> [turbofan] Implemented the TruncateFloat32ToInt64 TurboFan operator.
>
> The TruncateFloat32ToInt64 operator converts a float32 to an int64 using
> the round-to-zero rounding mode (truncate). If the input value is
> outside the int64 range, then the result depends on the architecture. I
> implemented the operator on x64, arm64, and mips64.
>
> R=titzer@chromium.org, jacob.bramley@arm.com
>
> Committed: https://crrev.com/1df1066c3c77464d2a68d7c8d501a5a0f3ad195a
> Cr-Commit-Position: refs/heads/master@{#32315}
TBR=jacob.bramley@arm.com,titzer@chromium.org,v8-mips-ports@googlegroups.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1475343002
Cr-Commit-Position: refs/heads/master@{#32316}
The TruncateFloat32ToInt64 operator converts a float32 to an int64 using
the round-to-zero rounding mode (truncate). If the input value is
outside the int64 range, then the result depends on the architecture. I
implemented the operator on x64, arm64, and mips64.
R=titzer@chromium.org, jacob.bramley@arm.com
Review URL: https://codereview.chromium.org/1476063002
Cr-Commit-Position: refs/heads/master@{#32315}
The Float32RoundTiesEven operator rounds float32 numbers towards the nearest
integer. If the distance to two integers is the same, then the result is
the even integer. This is the default rounding mode of the ieee 754 floating
point standard.
I implemented the optional Float32RoundTiesEven operator on x64, ia32, arm, and arm64.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1477753002
Cr-Commit-Position: refs/heads/master@{#32308}
The Float32RoundTruncate operator rounds float32 numbers towards zero.
The operator is currently implemented on x64, ia32, arm, and arm64.
Additionally I added support for the float32 vrintz, vrintn, and vrinta
instructions to the arm simulator.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1468303005
Cr-Commit-Position: refs/heads/master@{#32301}
The Float32RoundUp operator rounds float32 numbers towards infinity.
The operator is currently implemented on x64, ia32, arm, and arm64.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1474963002
Cr-Commit-Position: refs/heads/master@{#32262}
This change replaces the bitwise masking of uses by storing the most general truncation for all uses.
Review URL: https://codereview.chromium.org/1464763003
Cr-Commit-Position: refs/heads/master@{#32248}
Adds code and tests to support CreateClosure bytecode when building
graphs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1458603012
Cr-Commit-Position: refs/heads/master@{#32224}
Adds support for the New, CallRuntime and CallJSRuntime bytecodes in
BytecodeGraphBuilder. Also adds BuildLoadObjectField,
BuildLoadGlobalObject and BuildLoadNativeContextField helpers.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456483002
Cr-Commit-Position: refs/heads/master@{#32136}
The TruncateFloat64ToUint64 operator converts a float64 to an uint64 using
round-to-zero rounding mode (truncate). If the input value is outside uint64
range, then the result depends on the architecture. I provide an implementation for x64 and arm64.
@v8-ppc-ports and @v8-mips-ports, can you do the implementations for ppc64 and mips64?
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1457373002
Cr-Commit-Position: refs/heads/master@{#32127}
The ChangeFloat64ToInt64 operator changes the representation of a
float64 input value to int64 if the input value can be represented
exactly on int64. Otherwise the result is currently undefined.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1455983002
Cr-Commit-Position: refs/heads/master@{#32102}
If the input type does not help us, we are conservative and truncate (rather than guessing signed).
Review URL: https://codereview.chromium.org/1455103002
Cr-Commit-Position: refs/heads/master@{#32075}
Adds support for the LdaGlobal and StaGlobal bytecodes to the
BytecodeGraphBuilder. Also fixes a bug in the context node's parameter
index and start node inputs.
Landed on behalf of rmcilroy.
TBR=bmeuer@chromium.org,mythria@chromium.org
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1449373002
Cr-Commit-Position: refs/heads/master@{#32049}
Adds support for visiting the Call bytecode to the bytecode graph builder.
This change also adds the call type feedback slot to the Call bytecode.
This is not currently used by the interpreter, but is used by the
graph builder.
Also adds a CallWide varient of the Call bytecode, and adds the kCount16
operand type.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456453002
Cr-Commit-Position: refs/heads/master@{#32033}
Adds implementation and tests for following operators in bytecode graph builder:
-VisitLoadICSloppy
-VisitLoadICStrict
-VisitLoadICSloppyWide
-VisitLoadICStrictWide
The current implementation introduces empty frame states for frame state inputs expected by these operations.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419373007
Cr-Commit-Position: refs/heads/master@{#32026}
The TiesEven rounding mode rounds float64 numbers to the nearest
integer. If there are two nearest integers, then the number is rounded
to the even one. This is the default rounding mode according to
IEEE~754.
I implemented the operator on ia32, x64, arm, arm64, mips, and mips64.
I think there is a bug in the current implementation of the ppc
simulator, which kept me from implementing the operator on ppc.
According to my understanding of the ppc instruction manual, the FRIN
instruction provides the right behavior for Float64RoundTiesEven. In the
simulator, however, FRIN provides a different semantics. If there are
two nearest integers, then the simulator returns the one which is
further away form 0.
Review URL: https://codereview.chromium.org/1440293002
Cr-Commit-Position: refs/heads/master@{#32005}
This is necessary to allow more optimizations to take place between
the representation inference and change lowering. Perhaps we want
to rename SimplifiedLowering -> RepresentationInference and
ChangeLowering -> SimplifiedLowering.
Review URL: https://codereview.chromium.org/1439473003
Cr-Commit-Position: refs/heads/master@{#31976}
The least significant bit of the input value may affect the result of
the conversion through rounding. We OR the least significant with the
second least significant bit to preserve it over the SHR instruction.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1435203003
Cr-Commit-Position: refs/heads/master@{#31969}
Popcnt is implemented as an optional operator, which is only implementd by x64
at the moment.
Review URL: https://codereview.chromium.org/1424173006
Cr-Commit-Position: refs/heads/master@{#31928}
This patch extends the typed lowering with a specialized version of 'instanceof' that is used if the "class", i.e. the constructor function, is a known constant.
Unittests check that replacement occurs as intended. Functional correctness is ensured by extensive unit tests covering instanceof already in the testsuite.
TESTS=unittests/JSTypedLoweringTest.{JSInstanceOfSpecializationWithSmiCheck,JSInstanceOfSpecializationWithoutSmiCheck,JSInstanceOfNoSpecialization}
Review URL: https://codereview.chromium.org/1407413014
Cr-Commit-Position: refs/heads/master@{#31916}
I improved the tests for Word32Clz, Word32Ctz, and Word32Popcnt, and ported
some tests to the BufferedRawMachineAssemblerTester.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1437493002
Cr-Commit-Position: refs/heads/master@{#31896}
This change does not change how the BufferedRawMachineAssemblerTester is
used in tests, but it makes its construction in other constructors (e.g.
in the WasmRunner) cleaner.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1414203009
Cr-Commit-Position: refs/heads/master@{#31850}
The %_CallFunction doesn't implement the call sequence properly, it
doesn't do the receiver wrapping, nor does it check for
classConstructor. Also the eager deoptimization for %_CallFunction was
seriously b0rked (we must have been lucky with TurboFan so far).
R=yangguo@chromium.org
BUG=v8:4413
LOG=n
Review URL: https://codereview.chromium.org/1419813010
Cr-Commit-Position: refs/heads/master@{#31821}
TurboFan didn't fully support the relevant ES6 type conversion
intrinsics like %_ToNumber, %_ToLength, %_ToName, %_ToString and
%_ToInteger until now, we always went to the runtime instead. These
intrinsics are now well supported in TurboFan, and we are even able to
generate quite decent code in some cases.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1428243003
Cr-Commit-Position: refs/heads/master@{#31820}
The CL https://codereview.chromium.org/1409013004 added / changed some test cases.
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result
check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function, those inlined
functions has different behavior comparing with GCC ia32 build and x87 build. The major
difference is sse float register still has single precision rounding semantic. While X87
register has no such rounding precsion semantic when directly use register value. The V8
turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type case to keep the same precision.
float expect = *i * *j; // *i + *j, etc.
For test case "RunFloat64MulAndFloat64Add1 / RunFloat64MulAndFloat64Add2 / RunFloat64MulAndFloat64Sub1
/ RunFloat64MulAndFloat64Sub2", the expected result calcaulated by GCC has difference precsion
when comparing with V8 turbofan result for X87 platform. (Turbofan X87 result is the same as
IA32 GCC and IA32 Turbofan). So we have to disable those four cases for X87 port.
BUG=
Review URL: https://codereview.chromium.org/1430943002
Cr-Commit-Position: refs/heads/master@{#31808}
The BufferedRawMachineAssemblerTester takes care of storing and loading
parameters to and from memory for these test cases. By using the
BufferedRawMachineAssemblerTester the test cases become more readible.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1409013004
Cr-Commit-Position: refs/heads/master@{#31718}
This utility makes it possible to test TF graphs that accept parameters of any machine type (even int64 and float64), which are previously problematic due to the complexity of C calling conventions.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1423133005
Cr-Commit-Position: refs/heads/master@{#31698}
This moves all cctest files for the compiler to live in the same
namespace as the components they are testing. Hence we can avoid the
forbidden using directives pulling in entire namespaces.
From the Google C++ style guide: "You may not use a using-directive to
make all names from a namespace available". This would be covered by
presubmit linter checks if build/namespaces were not blacklisted.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1424943004
Cr-Commit-Position: refs/heads/master@{#31671}
Up until now, if one wanted to specify an explicit stack location or register as an operand for an instruction, it had to also be
explicitly associated with a virtual register as a so-called
FixedRegister or FixedStackSlot.
For the implementation of tail calls, the plan is to use the gap
resolver needs to shuffle stack locations from the caller to the
tail-called callee. In order to do this, it must be possible to
explicitly address operand locations on the stack that are not
associated with virtual registers.
This CL introduces ExplictOperands, which can specify a specific
register or stack location that is not associated with virtual
register. This will allow tail calls to specify the target
locations for the necessary stack moves in the gap for the tail
call without the core register allocation having to know about
the target of the stack moves at all.
In the process this CL:
* creates a new Operand kind, ExplicitOperand, with which
instructions can specify register and stack slots without an
associated virtual register.
* creates a LocationOperand class from which AllocatedOperand and
ExplicitOperand are derived and provides a common interface to
get Register, DoubleRegister and spill slot information.
* removes RegisterOperand, DoubleRegisterOperand,
StackSlotOperand and DoubleStackSlotOperand, they are subsumed
by LocationOperand.
* addresses a cleanup TODO in AllocatedOperand to reduce the
redundancy of AllocatedOperand::Kind by using machine_type() to
determine if an operand corresponds to a general purpose or
double register.
BUG=v8:4076
LOG=n
Review URL: https://codereview.chromium.org/1389373002
Cr-Commit-Position: refs/heads/master@{#31603}
Currently we still (mis)used some machine operators in typed lowering
(namely Word32Or, Word32Xor and Word32And). But these operators are
"polymorphic" in the signedness of their inputs and output, hence the
representation selection (and thereby simplified lowering) was unable to
figure out whether a bitwise operation that was seen would produce an
unsigned or a signed result. If such nodes also have frame state uses,
the only safe choice was float64, which was not only a lot less ideal,
but also the main cause of the for-in related deoptimizer loops.
Adding dedicated NumberBitwiseOr, NumberBitwiseAnd and NumberBitwiseXor
simplified operators not only gives us precise (and correct) typing for
the bitwise operations, but also allows us to actually verify the graph
properly after typed lowering.
Drive-by-fix: Remove the double-to-smi magic from the Deoptimizer, which
is responsible for various deopt-loops in TurboFan, and is no longer
needed with the addition of the NumberBitwise operators.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1422213002
Cr-Commit-Position: refs/heads/master@{#31594}
Adds support for loading from and storing to outer context
variables. Also adds support for declaring functions on contexts and
locals. Finally, fixes a couple of issues with StaContextSlot where
we weren't emitting the write barrier and therefore would crash in the
GC.
Also added code so that --print-bytecode will output the
function name before the bytecodes, and replaces MachineType with StoreRepresentation in RawMachineAssembler::Store and updates tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1425633002
Cr-Commit-Position: refs/heads/master@{#31584}
Introduce new typing rules for LoadField[Map], which try to take into
account stable map information if the object either has type Constant or
type Class. If the map of the object is stable but can transition we
have to introduce a code dependency in the Typer to make sure that the
information (the Constant type we infer for LoadField[Map]) is valid
(and stays valid).
This also settles the policy for depending on map stability: The
definition can introduce any number of maps, without having to pay
attention to stability (i.e. you can always use Type::Class to introduce
a map that is propagated along the value edges), and the use site is
responsible for checking that the type information is valid before using
it. I.e. if you use stable map information, you'll have to add a
stability dependency (or make sure the map cannot transition).
Drive-by-improvement: Add ReferenceEqualTyper which takes input types
into account for improved constant folding.
Drive-by-fix: Apply policy mentioned above to JSNativeContextSpecialization.
R=jarin@chromium.org, rossberg@chromium.org
BUG=v8:4470
LOG=n
Review URL: https://codereview.chromium.org/1410953006
Cr-Commit-Position: refs/heads/master@{#31567}
register configurations currently. This CL provides a mechanism so that
optimizing compilers can select different Register Configuration.
BUG=
Review URL: https://codereview.chromium.org/1405673003
Cr-Commit-Position: refs/heads/master@{#31476}
This removes all locally constructed SimplifiedOperatorBuilder instances
and uses the one passed along the JSGraph. It ensures that the correct
zone is used to allocate operators, no matter where the reducer is used.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1410003002
Cr-Commit-Position: refs/heads/master@{#31355}
This fixes the lifetime of nodes created by JSGlobalSpecialization that
contain a simplified operator. In the case where this reducer runs as
part of the inliner, the SimplifiedOperatorBuilder was instantiated with
the wrong zone. This led to use-after-free of simplified operators.
To avoid such situations in the future, we decided to move this operator
builder into the JSGraph and make the situation uniform with all other
operator builders.
R=bmeurer@chromium.org
BUG=chromium:543528
LOG=n
Review URL: https://codereview.chromium.org/1409993002
Cr-Commit-Position: refs/heads/master@{#31334}
Not all register codes are safe for use on all architectures.
Using RegisterConfiguration when picking a calling convention
in test-multiple-return.
BUG=None
TEST=test-multiple-return
R=titzer@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1401453002
Cr-Commit-Position: refs/heads/master@{#31188}
This will allow exploration of possibilities like passing around buffer base and length.
BUG=None
TEST=test-multiple-return
LOG=N
R=mtrofin@chromium.org,titzer@chromium.org
Review URL: https://codereview.chromium.org/1391333003
Cr-Commit-Position: refs/heads/master@{#31184}
Fixes:
../../test/cctest/compiler/test-js-typed-lowering.cc:224:14:
error: ‘kJSTypes’ defined but not used [-Werror=unused-variable]
static Type* kJSTypes[] = {Type::Undefined(), Type::Null(), Type::Boolean(),
../../src/bignum.cc: In member function
‘void v8::internal::Bignum::AssignDecimalString(Vector<const char>)’:
../../src/bignum.cc:80:6: error: assuming signed overflow does not occur when
assuming that (X + c) < X is always false [-Werror=strict-overflow]
../../src/compiler/ia32/code-generator-ia32.cc:1366:3:
required from here ../../src/base/logging.h:123:26:
error: comparison between signed and unsigned integer expressions
[-Werror=sign-compare] DEFINE_CHECK_OP_IMPL(EQ, ==)
BUG=
Review URL: https://codereview.chromium.org/1371823002
Cr-Commit-Position: refs/heads/master@{#31095}
Previous to this patch, both the lithium and TurboFan register
allocators tracked allocated registers by "indices", rather than
the register codes used elsewhere in the runtime. This patch
ensures that codes are used everywhere, and in the process cleans
up a bunch of redundant code and adds more structure to how the
set of allocatable registers is defined.
Some highlights of changes:
* TurboFan's RegisterConfiguration class moved to V8's top level
so that it can be shared with Crankshaft.
* Various "ToAllocationIndex" and related methods removed.
* Code that can be easily shared between Register classes on
different platforms is now shared.
* The list of allocatable registers on each platform is declared
as a list rather than implicitly via the register index <->
code mapping.
Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
Cr-Commit-Position: refs/heads/master@{#30913}
Committed: https://crrev.com/7b7a8205d9a00c678fb7a6e032a55fecbc1509cf
Cr-Commit-Position: refs/heads/master@{#31075}
Review URL: https://codereview.chromium.org/1287383003
Cr-Commit-Position: refs/heads/master@{#31087}
Reason for revert:
Failures on MIPS
Original issue's description:
> Remove register index/code indirection
>
> Previous to this patch, both the lithium and TurboFan register
> allocators tracked allocated registers by "indices", rather than
> the register codes used elsewhere in the runtime. This patch
> ensures that codes are used everywhere, and in the process cleans
> up a bunch of redundant code and adds more structure to how the
> set of allocatable registers is defined.
>
> Some highlights of changes:
>
> * TurboFan's RegisterConfiguration class moved to V8's top level
> so that it can be shared with Crankshaft.
> * Various "ToAllocationIndex" and related methods removed.
> * Code that can be easily shared between Register classes on
> different platforms is now shared.
> * The list of allocatable registers on each platform is declared
> as a list rather than implicitly via the register index <->
> code mapping.
>
> Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
> Cr-Commit-Position: refs/heads/master@{#30913}
>
> Committed: https://crrev.com/7b7a8205d9a00c678fb7a6e032a55fecbc1509cf
> Cr-Commit-Position: refs/heads/master@{#31075}
TBR=akos.palfi@imgtec.com,bmeurer@chromium.org,jarin@chromium.org,paul.lind@imgtec.com,titzer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1380863004
Cr-Commit-Position: refs/heads/master@{#31083}
Previous to this patch, both the lithium and TurboFan register
allocators tracked allocated registers by "indices", rather than
the register codes used elsewhere in the runtime. This patch
ensures that codes are used everywhere, and in the process cleans
up a bunch of redundant code and adds more structure to how the
set of allocatable registers is defined.
Some highlights of changes:
* TurboFan's RegisterConfiguration class moved to V8's top level
so that it can be shared with Crankshaft.
* Various "ToAllocationIndex" and related methods removed.
* Code that can be easily shared between Register classes on
different platforms is now shared.
* The list of allocatable registers on each platform is declared
as a list rather than implicitly via the register index <->
code mapping.
Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
Cr-Commit-Position: refs/heads/master@{#30913}
Review URL: https://codereview.chromium.org/1287383003
Cr-Commit-Position: refs/heads/master@{#31075}
Introduce %_ToNumber intrinsic, which just calls to the existing
ToNumberStub, and remove all uses of our custom JavaScript plus
intrinsics based ToNumber and friends.
Also replace the TO_NUMBER_INLINE macro with TO_NUMBER,
which is currently a wrapper for %_ToNumber. Newly written JS
code should use TO_NUMBER (similar to TO_STRING, TO_INT32,
and friends).
Also finally remove the DefaultString/DefaultNumber builtins, which
are basically the ES5 version of ToPrimitive. Now all code uses the
ES6 version, which is implemented in Object::ToPrimitive and
JSReceiver::ToPrimitive in C++.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_layout_dbg,v8_linux_nosnap_dbg
R=jarin@chromium.org
BUG=v8:4307
LOG=n
Review URL: https://codereview.chromium.org/1384443002
Cr-Commit-Position: refs/heads/master@{#31054}
This enables linter checking for "readability/namespace" violations
during presubmit and instead marks the few known exceptions that we
allow explicitly.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1371083003
Cr-Commit-Position: refs/heads/master@{#31019}
This is necessary because these operators can read heap (equality can actually write heap when flattening strings).
BUG=v8:4446
LOG=n
Review URL: https://codereview.chromium.org/1374683002
Cr-Commit-Position: refs/heads/master@{#31005}
This is mostly removing dead code and also dropping MUST_USE_RESULT
annotations from methods that cannot throw an exception anyways.
R=hpayer@chromium.org
Review URL: https://codereview.chromium.org/1370153002
Cr-Commit-Position: refs/heads/master@{#30995}
This name makes it clear that the flag (also the variant in the Compiler)
is talking about specializing to the function context instead of i.e. the
native context.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1372513003
Cr-Commit-Position: refs/heads/master@{#30934}
Verifies consistency of node inputs and uses:
- node inputs should agree with the input count computed from the node's operator.
- effect inputs should have effect outputs (or be a sentinel).
- control inputs should have control outputs (or be a sentinel).
- frame state inputs should be frame states (or be a sentinel).
- if the node has control uses, it should produce control.
- if the node has effect uses, it should produce effect.
- if the node has frame state uses, it must be a frame state.
I also removed some tests, either because they did not seem to be useful (scheduler) or they tested dead functionality (diamond effect phi).
Review URL: https://codereview.chromium.org/1368913002
Cr-Commit-Position: refs/heads/master@{#30927}
Reason for revert:
Failures on greedy RegAlloc, Fuzzer
Original issue's description:
> Remove register index/code indirection
>
> Previous to this patch, both the lithium and TurboFan register
> allocators tracked allocated registers by "indices", rather than
> the register codes used elsewhere in the runtime. This patch
> ensures that codes are used everywhere, and in the process cleans
> up a bunch of redundant code and adds more structure to how the
> set of allocatable registers is defined.
>
> Some highlights of changes:
>
> * TurboFan's RegisterConfiguration class moved to V8's top level
> so that it can be shared with Crankshaft.
> * Various "ToAllocationIndex" and related methods removed.
> * Code that can be easily shared between Register classes on
> different platforms is now shared.
> * The list of allocatable registers on each platform is declared
> as a list rather than implicitly via the register index <->
> code mapping.
>
> Committed: https://crrev.com/80bc6f6e11f79524e3f1ad05579583adfd5f18b2
> Cr-Commit-Position: refs/heads/master@{#30913}
TBR=akos.palfi@imgtec.com,bmeurer@chromium.org,jarin@chromium.org,paul.lind@imgtec.com,titzer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1365073002
Cr-Commit-Position: refs/heads/master@{#30914}
Previous to this patch, both the lithium and TurboFan register
allocators tracked allocated registers by "indices", rather than
the register codes used elsewhere in the runtime. This patch
ensures that codes are used everywhere, and in the process cleans
up a bunch of redundant code and adds more structure to how the
set of allocatable registers is defined.
Some highlights of changes:
* TurboFan's RegisterConfiguration class moved to V8's top level
so that it can be shared with Crankshaft.
* Various "ToAllocationIndex" and related methods removed.
* Code that can be easily shared between Register classes on
different platforms is now shared.
* The list of allocatable registers on each platform is declared
as a list rather than implicitly via the register index <->
code mapping.
Review URL: https://codereview.chromium.org/1287383003
Cr-Commit-Position: refs/heads/master@{#30913}
Introduce a new macro TO_STRING that maps to %_ToString and use that
instead of calling into any of the ToString/NonStringToString JavaScript
builtins. Also remove the TO_STRING_INLINE macro, which is basically
obsolete with %_ToString. We still have a few uses of ToString left (via
the utils export mechanism), where we need to investigate whether we
will tank badly if we replace them with TO_STRING as well.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_layout_dbg,v8_linux_nosnap_dbg
R=yangguo@chromium.org
BUG=v8:4307
LOG=n
Review URL: https://codereview.chromium.org/1323543002
Cr-Commit-Position: refs/heads/master@{#30895}
Currently Execution::Call (and friends) still duplicate a lot of the
Call sequence logic that should be encapsulated in the Call and
CallFunction builtins. So the plan now is to switch Execution::Call
to accept any Callable and just pass that through to the Call builtin.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_nosnap_dbg
R=jarin@chromium.org
BUG=v8:4413
LOG=n
Committed: https://crrev.com/359645f48156e15f235e9a9ede7910e0bcd9ae45
Cr-Commit-Position: refs/heads/master@{#30791}
Review URL: https://codereview.chromium.org/1353723002
Cr-Commit-Position: refs/heads/master@{#30808}
Currently Execution::Call (and friends) still duplicate a lot of the
Call sequence logic that should be encapsulated in the Call and
CallFunction builtins. So the plan now is to switch Execution::Call
to accept any Callable and just pass that through to the Call builtin.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_nosnap_dbg
R=jarin@chromium.org
BUG=v8:4413
LOG=n
Review URL: https://codereview.chromium.org/1353723002
Cr-Commit-Position: refs/heads/master@{#30791}
This makes sure that the arguments object materialization in the method
prologue is composable with respect to inlining. The generic runtime
functions materializing those objects now respect the deoptimization
information when reconstructing the original arguments.
R=mvstanton@chromium.org
Review URL: https://codereview.chromium.org/1340313003
Cr-Commit-Position: refs/heads/master@{#30766}
This models the materialization of arguments objects in the prologue
within the IR graph. It will in turn allow us to optimize access to
these objects and also correctly handle them with inlining.
R=bmeurer@chromium.org,mvstanton@chromium.org
TEST=cctest/test-run-jsobjects/Arguments*
Review URL: https://codereview.chromium.org/1344553003
Cr-Commit-Position: refs/heads/master@{#30735}
Replace the ADD, SUB, etc. builtins with proper runtime implementations,
and expose them as runtime calls that can be used by the code stubs and
the interpreter (for now).
Also remove all the support runtime functions for ADD, SUB and friends,
namely %NumberAdd, %NumberSub, and so on.
R=mstarzinger@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_layout_dbg,v8_linux_nosnap_dbg
Review URL: https://codereview.chromium.org/1333843002
Cr-Commit-Position: refs/heads/master@{#30680}
This removes the aforementioned flag which has been on by default for a
while now. Note that this does not control optimization decisions, only
the last-resort bailout in the graph builder.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1335543002
Cr-Commit-Position: refs/heads/master@{#30673}
Similar to DELETE, the IN builtin is just a thin wrapper for %HasElement
and %HasProperty anyway, and cannot be optimized, plus it had a weird
special fast case (which also involved at least one LOAD_IC plus some
intrinsic magic).
R=yangguo@chromium.org,jarin@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_win_nosnap_shared_rel
Committed: https://crrev.com/72d60a1e80e81e2e68ca402665e2acbc46c5e471
Cr-Commit-Position: refs/heads/master@{#30154}
Review URL: https://codereview.chromium.org/1295433002
Cr-Commit-Position: refs/heads/master@{#30582}
This is to support WebAssembly 64-bit ints in the short term, since it
currently uses CheckedLoad/CheckedStore for accesses to the memory. In the
long run, we'll change this to be explicit bounds checks that throw on out
of bounds.
R=bmeurer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1310323006
Cr-Commit-Position: refs/heads/master@{#30555}
The usage of Unique<T> throughout the TurboFan IR does not have any
advantage. There is no single point in time when they are initialized
and most use-sites looked through to the underlying Handle<T> anyways.
Also there already was a mixture of Handle<T> versus Unique<T> in the
graph and this unifies the situation to use Handle<T> everywhere.
R=bmeurer@chromium.org,titzer@chromium.org
Review URL: https://codereview.chromium.org/1314473007
Cr-Commit-Position: refs/heads/master@{#30458}
%_IsObject(foo) is equivalent to typeof foo === 'object' and has
exactly the same optimizations, so there's zero need for %_IsObject
in our code base.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1313903003
Cr-Commit-Position: refs/heads/master@{#30380}
These two test cases introduced by 8525136b require that the double register is >=2.
But currently on x87 turbofan implementation only 1 double register is supported.
BUG=
Review URL: https://codereview.chromium.org/1308763003
Cr-Commit-Position: refs/heads/master@{#30321}
Reason for revert:
Breaks win32 nosnap
Original issue's description:
> [runtime] Remove useless IN builtin.
>
> Similar to DELETE, the IN builtin is just a thin wrapper for %HasElement
> and %HasProperty anyway, and cannot be optimized, plus it had a weird
> special fast case (which also involved at least one LOAD_IC plus some
> intrinsic magic).
>
> R=yangguo@chromium.org,jarin@chromium.org
>
> Committed: https://crrev.com/72d60a1e80e81e2e68ca402665e2acbc46c5e471
> Cr-Commit-Position: refs/heads/master@{#30154}
TBR=yangguo@chromium.org,jarin@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1288923002
Cr-Commit-Position: refs/heads/master@{#30155}
Similar to DELETE, the IN builtin is just a thin wrapper for %HasElement
and %HasProperty anyway, and cannot be optimized, plus it had a weird
special fast case (which also involved at least one LOAD_IC plus some
intrinsic magic).
R=yangguo@chromium.org,jarin@chromium.org
Review URL: https://codereview.chromium.org/1295433002
Cr-Commit-Position: refs/heads/master@{#30154}
TurboFan is now a requirement and supported by all backends, so we don't
need those macros (plus all the machinery on top) anymore.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1282763002
Cr-Commit-Position: refs/heads/master@{#30082}
Using the GraphBuilder base class forces each node creation to go
through a virtual function dispatch just for the sake of saving the
duplication of the NewNode helper methods. In total that added up to
saving minus (sic!) six lines of code.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1252093002
Cr-Commit-Position: refs/heads/master@{#29799}
The InterpreterAssembler needs to specify a specific CallDescriptor type
instead of using the SimplifiedCDescriptor type. This CL makes it possible
to specify the CallDescriptor used by the RawMachineAssembler instead of
specifying a MachineSignature.
Also removes instruction-selector-tester.h which was erroneously resurrected
at some point.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1235313002
Cr-Commit-Position: refs/heads/master@{#29777}
- Add a TurboFanIC class, derived from TurboFanCodeStub, that
automatically distinguishes between versions of the IC called from
optimized and unoptimized code.
- Add appropriate InterfaceDescriptors for both the versions of the
stub called from unoptimized and optimized code
- Change the MathFloor TF stub generator to output either the
for-optimized or for-unoptimized version based on the minor_key
parameter.
Committed: https://crrev.com/8f13b655b8a10dae2116dd18b32f09337bb2d410
Cr-Commit-Position: refs/heads/master@{#29534}
Review URL: https://codereview.chromium.org/1225943002
Cr-Commit-Position: refs/heads/master@{#29539}
Reason for revert:
Failure on compiling runtime.js on windows
Original issue's description:
> Add unoptimized/optimized variants of MathFloor TF code stub
>
> - Add a TurboFanIC class, derived from TurboFanCodeStub, that
> automatically distinguishes between versions of the IC called from
> optimized and unoptimized code.
> - Add appropriate InterfaceDescriptors for both the versions of the
> stub called from unoptimized and optimized code
> - Change the MathFloor TF stub generator to output either the
> for-optimized or for-unoptimized version based on the minor_key
> parameter.
>
> Committed: https://crrev.com/8f13b655b8a10dae2116dd18b32f09337bb2d410
> Cr-Commit-Position: refs/heads/master@{#29534}
TBR=mvstanton@chromium.org,bmeurer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1220783006
Cr-Commit-Position: refs/heads/master@{#29535}
- Add a TurboFanIC class, derived from TurboFanCodeStub, that
automatically distinguishes between versions of the IC called from
optimized and unoptimized code.
- Add appropriate InterfaceDescriptors for both the versions of the
stub called from unoptimized and optimized code
- Change the MathFloor TF stub generator to output either the
for-optimized or for-unoptimized version based on the minor_key
parameter.
Review URL: https://codereview.chromium.org/1225943002
Cr-Commit-Position: refs/heads/master@{#29534}
We actually need round to zero truncation to implement the counterpart
of LDoubleToI in TurboFan, which tries to convert a double to an integer
as required for keyed load/store optimizations.
Drive-by-cleanup: Reduce some code duplication in the InstructionSelector
implementations.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1225993002
Cr-Commit-Position: refs/heads/master@{#29527}
The RawMachineAssembler will be used to build the interpreter, so it needs
to move back to src/compiler.
This reverts commit b5b00cc031.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1221303014
Cr-Commit-Position: refs/heads/master@{#29519}
Remove the context specialization hack from the AstGraphBuilder, and
properly specialize to the function context in the context specialization.
And replace the correct context in the JSInliner.
R=mstarzinger@chromium.org
BUG=v8:4273
LOG=n
Review URL: https://codereview.chromium.org/1218873005
Cr-Commit-Position: refs/heads/master@{#29493}
We have to reland these two commits at once, because the first breaks
some asm.js benchmarks without the second. The change was reverted
because of bogus checks in the verifier, which will not work in the
presence of OSR (and where hidden because of the type back propagation
hack in OSR so far). Original messages are below:
[turbofan] Add new JSFrameSpecialization reducer.
The JSFrameSpecialization specializes an OSR graph to the current
unoptimized frame on which we will perform the on-stack replacement.
This is used for asm.js functions, where we cannot reuse the OSR
code object anyway because of context specialization, and so we could as
well specialize to the max instead.
It works by replacing all OsrValues in the graph with their values
in the JavaScriptFrame.
The idea is that using this trick we get better performance without
doing the unsound backpropagation of types to OsrValues later. This
is the first step towards fixing OSR for TurboFan.
[turbofan] Perform OSR deconstruction early and remove type propagation.
This way we don't have to deal with dead pre-OSR code in the graph
and risk optimizing the wrong code, especially we don't make
optimistic assumptions in the dead code that leaks into the OSR code
(i.e. deopt guards are in dead code, but the types propagate to OSR
code via the OsrValue type back propagation).
BUG=v8:4273
LOG=n
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1226673005
Cr-Commit-Position: refs/heads/master@{#29486}
This way we don't have to deal with dead pre-OSR code in the graph and
risk optimizing the wrong code, especially we don't make optimistic
assumptions in the dead code that leaks into the OSR code (i.e. deopt
guards are in dead code, but the types propagate to OSR code via the
OsrValue type back propagation).
BUG=v8:4273
LOG=n
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1215333005
Cr-Commit-Position: refs/heads/master@{#29478}
Currently we lower shifts directly to machine operators, and add an
appropriate Word32And to implement the & 0x1F operation on the right
hand side required by the specification. However for Word32And we assume
Int32 in simplified lowering, which is basically changes the right hand
side bit interpretation for the shifts from Uint32 to Int32, which is
obviously wrong. So now we represent that explicitly by proper
simplified operators for the shifts, which are lowered to machine in
simplified lowering.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1213803008
Cr-Commit-Position: refs/heads/master@{#29465}
The deoptimizer (and probably various other places) cannot deal properly
with recursive function inlining, so we disallow it in TurboFan as well.
We might want to reconsider that decision at some point in the future.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1211243007
Cr-Commit-Position: refs/heads/master@{#29374}
This optimization never triggers currently, and is inherently native
context dependent for no real reason (for example it will not properly
detect those constructors in the case of cross native context inlining),
plus it is slow and awkward. In case we really need this functionality
at some point, we should find a way to make it work with the builtin
function id mechanism that is already in place to match other builtins.
R=jarin@chromium.org,rossberg@chromium.org
Review URL: https://codereview.chromium.org/1221683006
Cr-Commit-Position: refs/heads/master@{#29365}
This fixes a slight inconsistency in the InstructionSelector that
basically disabled the optimization for things like ObjectIsSmi.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1206773002
Cr-Commit-Position: refs/heads/master@{#29250}
- Thread Type::FunctionType through stubs and the TF pipeline.
- Augment Typer to decorate parameter nodes with types from
a Type::FunctionType associated with interface descriptors.
- Factor interface descriptors into platform-specific and
platform-independent components so that all descriptors share
a common Type::FunctionType for all platforms.
Review URL: https://codereview.chromium.org/1197703002
Cr-Commit-Position: refs/heads/master@{#29248}
This makes usage of the MachineOperatorBuilder more robust, as it will be
an error to request an unsupported operator.
Along the way, I noticed that all 7 platforms support Float32Abs and
Float64Abs. Should make them non-optional in another CL?
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1128133003
Cr-Commit-Position: refs/heads/master@{#29223}
This also threads through the parameter count and local count to the instruction selector. This will be later used to allow merging of various StateValues vector (and prepare for differential encoding which will not distinguish between parameters, locals and expression stack).
BUG=
Review URL: https://codereview.chromium.org/1191243003
Cr-Commit-Position: refs/heads/master@{#29214}
The three different concerns that the ControlReducer used to deal with
are now properly separated into
a.) DeadCodeElimination, which is a regular AdvancedReducer, that
propagates Dead via control edges,
b.) CommonOperatorReducer, which does strength reduction on common
operators (i.e. Branch, Phi, and friends), and
c.) GraphTrimming, which removes dead->live edges from the graph.
This will make it possible to run the DeadCodeElimination together with
other passes that actually introduce Dead nodes, i.e. typed lowering;
and it opens the door for general inlining without two stage fix point
iteration.
To make the DeadCodeElimination easier and more uniform, we basically
reverted the introduction of DeadValue and DeadEffect, and changed the
Dead operator to produce control, value and effect. Note however that
this is not a requirement, but merely a way to make dead propagation
easier and more uniform. We could always go back and decide to have
different Dead operators if some other change requires that.
Note that there are several additional opportunities for cleanup now,
i.e. OSR deconstruction could be a regular reducer now, and we don't
need to use TheHole as dead value marker in the GraphReducer. And we can
actually run the dead code elimination together with the other passes
instead of using separate passes over the graph. We will do this in
follow up CLs.
R=jarin@chromium.org, mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1193833002
Cr-Commit-Position: refs/heads/master@{#29146}
This turns the CommonOperatorReducer into an AdvancedReducer and makes
it independent of JSGraph (which was used only because it was convienent),
and let's the CommonOperatorReducer run together with the ControlReducer.
The ControlReducer is still not able to run together with other reducers,
but we're getting closer. The plan is to split the ControlReducer into
two parts: The dead code elimination part and the common operator
reduction part. This separation will help to avoid tricky bugs in the
future and should make testing a *lot* easier.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1192063002
Cr-Commit-Position: refs/heads/master@{#29105}
The condition of a Branch or Select can never be a NumberConstant,
because the resulting graph would be invalid, so we don't need to
optimize this case. It can only ever be a tagged boolean or an untagged
bit.
Drive-by-fix: Test the interesting cases in the unit tests instead.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1195443004
Cr-Commit-Position: refs/heads/master@{#29089}
Up until now that was still mixed with control reduction in the
ControlReducer. This separation allows us to remove the horrible
Reducer::Finish hack and also do graph trimming at more appropriate
places in the pipeline (i.e. trim dead nodes after generic lowering,
which can also make nodes dead).
R=jarin@chromium.org,mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1188433010
Cr-Commit-Position: refs/heads/master@{#29077}
This ensures there is a lazy bailout point at the entry of every
exception handler so that deoptimized code is not re-entered through
caught exceptions.
R=jarin@chromium.org
TEST=cctest/test-run-deopt/DeoptExceptionHandler
Review URL: https://codereview.chromium.org/1173253004
Cr-Commit-Position: refs/heads/master@{#29061}
Up until now we used int32_t for NodeId, but that was not ideal because
negative values are invalid for NodeId and we use it as an array index
for example in the NodeMarker class, where C++ compilers on x64 have to
generate code that does proper sign extension for the indices, which is
completely unnecessary.
R=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/1178403004
Cr-Commit-Position: refs/heads/master@{#28997}
Frame Elider requires a sane CFG which should have such dummy end block.
BUG=
Review URL: https://codereview.chromium.org/1166293004
Cr-Commit-Position: refs/heads/master@{#28911}
Up until now we can only inline based on JSFunction, because of the way
the deoptimization works. With this change we will be able to inline
based on the SharedFunctionInfo and materialize the JSFunction from a
literal or a stack slot when necessary.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1169103004
Cr-Commit-Position: refs/heads/master@{#28906}
This adds some basic tests of the interaction between try-catch and
try-finally statements and OSR in TurboFan. The try-osr test suite
follows the structure of try-deopt closely.
R=titzer@chromium.org
TEST=mjsunit/compiler/try-osr
Review URL: https://codereview.chromium.org/1165103003
Cr-Commit-Position: refs/heads/master@{#28855}
This allows try-catch and try-finally constructs to be separately
enabled and disabled. We plan to stage try-catch support soon.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1157863015
Cr-Commit-Position: refs/heads/master@{#28848}
This allows any AdvancedReducer to remove exception projections from
graphs. This is the common case when JS-operators are being replaced
with pure values. The old NodeProperties::ReplaceWithValue is being
deprecated in favor of AdvancedReducer::ReplaceWithValue.
R=titzer@chromium.org
TEST=unittests/AdvancedReducerTest
Review URL: https://codereview.chromium.org/1168693002
Cr-Commit-Position: refs/heads/master@{#28810}
Unfortunately StringAdd is not pure in V8 because we might throw an
exception if the resulting string length is outside the valid bounds, so
there's no point in having a simplified StringAdd operator.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1164743002
Cr-Commit-Position: refs/heads/master@{#28747}
When compiling on a laptop I like to concatenate the small test files.
This makes a big difference to compile times. These changes make that
easier.
R=ulan@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1163803002
Cr-Commit-Position: refs/heads/master@{#28742}
This simplifies inlining, in that we only need to update uses of Start
and inputs of End instead of walking the whole inlinee to update all
outer frame states.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1146403008
Cr-Commit-Position: refs/heads/master@{#28649}
This way we don't need to connect (potentially) non-terminating loops
later during control reduction, which saves one forward pass over the
control graph. Long term we will move the trimming functionality of
the control reducer to the GraphReducer, and get rid of the Finish
method again.
As a bonus, this change also properly rewires Terminate, Throw and
Deoptimize during inlining.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1155683004
Cr-Commit-Position: refs/heads/master@{#28625}
This simplifies the handling of the End node. Based on this CL we will
finally fix terminating every loop from the beginning (via Terminate
nodes) and fix inlining of Throw, Deoptimize and Terminate.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1157023002
Cr-Commit-Position: refs/heads/master@{#28620}
This reduces the storage per-Node storage from 7 words to 6 and per-edge
storage from 6 words to 4.
On average this is about 10%-15% space savings over the whole graph.
Remove the use of std::deque as the out-of-line storage for inputs.
Reduce size of Use links and use pointer arithmetic to find Node
from Use.
R=mstarzinger@chromium.org,jarin@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1150923003
Cr-Commit-Position: refs/heads/master@{#28583}
Currently the stub simply calls out to the runtime, this will be
improved in a later CLs. The current state at least avoids bit-rot and
later merging horror.
Fixes frame construction logic for stubs, too, and contains quite a few
tiny cleanups in stub-land.
Review URL: https://codereview.chromium.org/1150673002
Cr-Commit-Position: refs/heads/master@{#28555}
Replace the --turbo-deoptimization flag with --turbo-asm-deoptimization
and enable deoptimization for non-asm.js TurboFan code unconditionally.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1153483002
Cr-Commit-Position: refs/heads/master@{#28543}
This in turn allows usage of AdvancedReducer::ReplaceWithValue which
has access to the underlying graph reducer. It will allow us to deal
with exception continuations correctly.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1134303003
Cr-Commit-Position: refs/heads/master@{#28468}
When the page is controlled by a ServiceWorker, the ServiceWorker can return an opaque (non-CORS cross origin) resource response.
We need to treat the messages from such script resource as opaque.
Committed: https://crrev.com/7a599c5e1242d3c5ab7515ee149623da90ae69ec
Cr-Commit-Position: refs/heads/master@{#28445}
Review URL: https://codereview.chromium.org/1140673002
Cr-Commit-Position: refs/heads/master@{#28459}
When the page is controlled by a ServiceWorker, the ServiceWorker can return an opaque (non-CORS cross origin) resource response.
We need to treat the messages from such script resource as opaque.
Review URL: https://codereview.chromium.org/1140673002
Cr-Commit-Position: refs/heads/master@{#28445}
Implements the strong mode proposal's restrictions on implicit conversions
for the binary >, >=, <, and <= operators.
BUG=v8:3956
LOG=N
Review URL: https://codereview.chromium.org/1130283002
Cr-Commit-Position: refs/heads/master@{#28370}
This stub will be used as the basis of a Math.floor-specific CallIC to
detect and track calls to floor that return -0.
Along the way:
- Create a TurboFanCodeStub super class from which the StringLength and
MathRound TF stubs derive.
- Fix the ugly hack that passes the first stub parameter as the "this"
pointer in the the TF-compiled JS function.
- Fix bugs in the ia32/x64 disassembler.
Review URL: https://codereview.chromium.org/1137703002
Cr-Commit-Position: refs/heads/master@{#28339}
An AdvancedReducer is basically a regular Reducer with an editor
that can perform graph editing operations beyond changing or
replacing the node that is currently being reduced. The GraphReducer
is the default implementation of the AdvancedReducer::Editor interface.
The ControlReducerImpl is now just an AdvancedReducer, which
temporarily requires a Finish method in the reducer to implement
the dead node trimming until we move that to the GraphReducer
(which in turn requires that all loops are connected to End).
Review URL: https://codereview.chromium.org/1122423003
Cr-Commit-Position: refs/heads/master@{#28251}
"RunAllocate" test case is added in d6945db7. it invokes Linkage::GetStubCallDescriptor
which is unimplemented for turbofan unsupported platform.
BUG=
Review URL: https://codereview.chromium.org/1129483003
Cr-Commit-Position: refs/heads/master@{#28244}
This introduces a simplified allocation operator which can be used to
model inline allocations in TurboFan. It is currently used for context
allocations, but still disabled because change lowering introduces
floating allocations outside the effect chain that interfere.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1109773002
Cr-Commit-Position: refs/heads/master@{#28195}
- allows the optimization of emitted gap move code since the representation of the value in the register is known
- necessary preparation for vector register allocation
- prepare for slot sharing for any value of the same byte width
TBR=jarin@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1111323003
Cr-Commit-Position: refs/heads/master@{#28140}
- allows the optimization of emitted gap move code since the representation of the value in the register is known
- necessary preparation for vector register allocation
- prepare for slot sharing for any value of the same byte width
BUG=
Review URL: https://codereview.chromium.org/1087793002
Cr-Commit-Position: refs/heads/master@{#28137}
Currently only the Win64 bots report this warnings, which adds quite
some overhead to the development process. With this flag we also get
compiler warnings about implicit 64bit to 32bit truncations when
building with clang on Linux/x64 and Mac/x64.
R=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/1111733002
Cr-Commit-Position: refs/heads/master@{#28093}
Implements the strong mode proposal's restrictions on
implicit conversions for binary arithmetic operations, not
including the + special case. Adds some infrastructure
for future implementation of the restrictions for other
operators.
BUG=v8:3956
LOG=N
Review URL: https://codereview.chromium.org/1092353002
Cr-Commit-Position: refs/heads/master@{#28045}
- make ParallelMove into a ZoneVector, removing an annoying level of indirection
- make MoveOperands hold InstructionOperands instead of pointers, so there's no more operand aliasing for moves
- opens up possibility of storing MachineType in allocated operands
R=bmeurer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1081373002
Cr-Commit-Position: refs/heads/master@{#27842}
This is preparatory work to have MachineTypes encoded in AllocatedOperands.
Review URL: https://codereview.chromium.org/1075863002
Cr-Commit-Position: refs/heads/master@{#27698}
- ConstantOperand was using a too-small field too store its virtual register
- drop ConvertTo, replace it with simple copy
- split AllocatedOperand off from Immediate and Constant to make assignment clearer, also paving the way for small Immediates
- put zone first in *Operand::New
- driveby: drop delayed ssa deconstruction experiment
R=titzer@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1050803002
Cr-Commit-Position: refs/heads/master@{#27692}
These operators compute the absolute floating point value of some
arbitrary input, and are implemented without any branches (i.e. using
vabs on arm, and andps/andpd on x86).
R=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/1066393002
Cr-Commit-Position: refs/heads/master@{#27662}
We can use xorps/xorpd on Intel CPUs to flip the sign bit. Ideally we'd
use a RIP-relative 128-bit constant in the code object, as OCaml/GCC
does, however that requires 128-bit alignment for code objects, which is
not yet implemented. So for now we materialize the mask inline.
R=dcarney@chromium.org
Review URL: https://codereview.chromium.org/1046893002
Cr-Commit-Position: refs/heads/master@{#27611}
This adds the basics necessary to support float32 operations in TurboFan.
The actual functionality required to detect safe float32 operations will
be added based on this later. Therefore this does not affect production
code except for some cleanup/refactoring.
In detail, this patchset contains the following features:
- Add support for float32 operations to arm, arm64, ia32 and x64
backends.
- Add float32 machine operators.
- Add support for float32 constants to simplified lowering.
- Handle float32 representation for phis in simplified lowering.
In addition, contains the following (related) cleanups:
- Fix/unify naming of backend instructions.
- Use AVX comparisons when available.
- Extend ArchOpcodeField to 9 bits (required for arm64).
- Refactor some code duplication in instruction selectors.
BUG=v8:3589
LOG=n
R=dcarney@chromium.org
Review URL: https://codereview.chromium.org/1044793002
Cr-Commit-Position: refs/heads/master@{#27509}
No compiler support for now (BTW: %_NewString, doesn't have that,
either), inline allocation will come later. Hopefully the last
intrisic to add for a StringAddStub POC...
Review URL: https://codereview.chromium.org/1041723002
Cr-Commit-Position: refs/heads/master@{#27508}
This switches full-codegen to no longer push and pop StackHandler
markers onto the operand stack, but relies on a range-based handler
table instead. We only use StackHandlers in JSEntryStubs to mark the
transition from C to JS code.
Note that this makes deoptimization and OSR from within any try-block
work out of the box, makes the non-exception paths faster and should
overall be neutral on the memory footprint (pros).
On the other hand it makes the exception paths slower and actually
throwing and exception more expensive (cons).
R=yangguo@chromium.org
TEST=cctest/test-run-jsexceptions/DeoptTry
Review URL: https://codereview.chromium.org/1010883002
Cr-Commit-Position: refs/heads/master@{#27440}
These are needed (among other things) for a TurboFan-generated
StringAddStub. Furthermore, they can be used to nuke the overly
complex %_IsInstanceType intrisic, it's completely expressible in
JavaScript now, but that will be done in a separate CL.
Alpha-sorted things a bit on the way to ease navigation.
Review URL: https://codereview.chromium.org/1010973010
Cr-Commit-Position: refs/heads/master@{#27415}
This removes the CompilationInfoWithZone class from the header file
because it is more than a pure convenience class and shouldn't be used
outside of the compiler at all.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1000353004
Cr-Commit-Position: refs/heads/master@{#27411}
