Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* sysdeps/powerpc/powerpc32/dl-machine.c (__process_machine_rela):
Use stdint types in rather than __attribute__((mode())).
* sysdeps/powerpc/powerpc64/dl-machine.h (elf_machine_rela): Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00105.html
Like strnlen, memchr and memrchr had a number of defects fixed by this
patch as well as adding little-endian support. The first one I
noticed was that the entry to the main loop needlessly checked for
"are we done yet?" when we know the size is large enough that we can't
be done. The second defect I noticed was that the main loop count was
wrong, which in turn meant that the small loop needed to handle an
extra word. Thirdly, there is nothing to say that the string can't
wrap around zero, except of course that we'd normally hit a segfault
on trying to read from address zero. Fixing that simplified a number
of places:
- /* Are we done already? */
- addi r9,r8,8
- cmpld r9,r7
- bge L(null)
becomes
+ cmpld r8,r7
+ beqlr
However, the exit gets an extra test because I test for being on the
last word then if so whether the byte offset is less than the end.
Overall, the change is a win.
Lastly, memrchr used the wrong cache hint.
* sysdeps/powerpc/powerpc64/power7/memchr.S: Replace rlwimi with
insrdi. Make better use of reg selection to speed exit slightly.
Schedule entry path a little better. Remove useless "are we done"
checks on entry to main loop. Handle wrapping around zero address.
Correct main loop count. Handle single left-over word from main
loop inline rather than by using loop_small. Remove extra word
case in loop_small caused by wrong loop count. Add little-endian
support.
* sysdeps/powerpc/powerpc32/power7/memchr.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/memrchr.S: Likewise. Use proper
cache hint.
* sysdeps/powerpc/powerpc32/power7/memrchr.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/rawmemchr.S: Add little-endian
support. Avoid rlwimi.
* sysdeps/powerpc/powerpc32/power7/rawmemchr.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00104.html
One of the things I noticed when looking at power7 timing is that rlwimi
is cracked and the two resulting insns have a register dependency.
That makes it a little slower than the equivalent rldimi.
* sysdeps/powerpc/powerpc64/memset.S: Replace rlwimi with
insrdi. Formatting.
* sysdeps/powerpc/powerpc64/power4/memset.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/memset.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/memset.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/memset.S: Likewise.
* sysdeps/powerpc/powerpc32/power6/memset.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/memset.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00103.html
LIttle-endian support for memcpy. I spent some time cleaning up the
64-bit power7 memcpy, in order to avoid the extra alignment traps
power7 takes for little-endian. It probably would have been better
to copy the linux kernel version of memcpy.
* sysdeps/powerpc/powerpc32/power4/memcpy.S: Add little endian support.
* sysdeps/powerpc/powerpc32/power6/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/mempcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power4/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power6/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/memcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/mempcpy.S: Likewise. Make better
use of regs. Use power7 mtocrf. Tidy function tails.
http://sourceware.org/ml/libc-alpha/2013-08/msg00102.html
This is a rather large patch due to formatting and renaming. The
formatting changes were to make it possible to compare power7 and
power4 versions of memcmp. Using different register defines came
about while I was wrestling with the code, trying to find spare
registers at one stage. I found it much simpler if we refer to a reg
by the same name throughout a function, so it's better if short-term
multiple use regs like rTMP are referred to using their register
number. I made the cr field usage changes when attempting to reload
rWORDn regs in the exit path to byte swap before comparing when
little-endian. That proved a bad idea due to the pipelining involved
in the main loop; Offsets to reload the regs were different first
time around the loop.. Anyway, I left the cr field usage changes in
place for consistency.
Aside from these more-or-less cosmetic changes, I fixed a number of
places where an early exit path restores regs unnecessarily, removed
some dead code, and optimised one or two exits.
* sysdeps/powerpc/powerpc64/power7/memcmp.S: Add little-endian support.
Formatting. Consistently use rXXX register defines or rN defines.
Use early exit labels that avoid restoring unused non-volatile regs.
Make cr field use more consistent with rWORDn compares. Rename
regs used as shift registers for unaligned loop, using rN defines
for short lifetime/multiple use regs.
* sysdeps/powerpc/powerpc64/power4/memcmp.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/memcmp.S: Likewise. Exit with
addi 1,1,64 to pop stack frame. Simplify return value code.
* sysdeps/powerpc/powerpc32/power4/memcmp.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00101.html
Adds little-endian support to optimised strchr assembly. I've also
tweaked the big-endian code a little. In power7/strchr.S there's a
check in the tail of the function that we didn't match 0 before
finding a c match, done by comparing leading zero counts. It's just
as valid, and quicker, to compare the raw output from cmpb.
Another little tweak is to use rldimi/insrdi in place of rlwimi for
the power7 strchr functions. Since rlwimi is cracked, it is a few
cycles slower. rldimi can be used on the 32-bit power7 functions
too.
* sysdeps/powerpc/powerpc64/power7/strchr.S (strchr): Add little-endian
support. Correct typos, formatting. Optimize tail. Use insrdi
rather than rlwimi.
* sysdeps/powerpc/powerpc32/power7/strchr.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strchrnul.S (__strchrnul): Add
little-endian support. Correct typos.
* sysdeps/powerpc/powerpc32/power7/strchrnul.S: Likewise. Use insrdi
rather than rlwimi.
* sysdeps/powerpc/powerpc64/strchr.S (rTMP4, rTMP5): Define. Use
in loop and entry code to keep "and." results.
(strchr): Add little-endian support. Comment. Move cntlzd
earlier in tail.
* sysdeps/powerpc/powerpc32/strchr.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00100.html
The strcpy changes for little-endian are quite straight-forward, just
a matter of rotating the last word differently.
I'll note that the powerpc64 version of stpcpy is just begging to be
converted to use 64-bit loads and stores..
* sysdeps/powerpc/powerpc64/strcpy.S: Add little-endian support:
* sysdeps/powerpc/powerpc32/strcpy.S: Likewise.
* sysdeps/powerpc/powerpc64/stpcpy.S: Likewise.
* sysdeps/powerpc/powerpc32/stpcpy.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00099.html
More little-endian support. I leave the main strcmp loops unchanged,
(well, except for renumbering rTMP to something other than r0 since
it's needed in an addi insn) and modify the tail for little-endian.
I noticed some of the big-endian tail code was a little untidy so have
cleaned that up too.
* sysdeps/powerpc/powerpc64/strcmp.S (rTMP2): Define as r0.
(rTMP): Define as r11.
(strcmp): Add little-endian support. Optimise tail.
* sysdeps/powerpc/powerpc32/strcmp.S: Similarly.
* sysdeps/powerpc/powerpc64/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc32/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power4/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc64/power7/strncmp.S: Likewise.
* sysdeps/powerpc/powerpc32/power7/strncmp.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00098.html
The existing strnlen code has a number of defects, so this patch is more
than just adding little-endian support. The changes here are similar to
those for memchr.
* sysdeps/powerpc/powerpc64/power7/strnlen.S (strnlen): Add
little-endian support. Remove unnecessary "are we done" tests.
Handle "s" wrapping around zero and extremely large "size".
Correct main loop count. Handle single left-over word from main
loop inline rather than by using small_loop. Correct comments.
Delete "zero" tail, use "end_max" instead.
* sysdeps/powerpc/powerpc32/power7/strnlen.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00097.html
This is the first of nine patches adding little-endian support to the
existing optimised string and memory functions. I did spend some
time with a power7 simulator looking at cycle by cycle behaviour for
memchr, but most of these patches have not been run on cpu simulators
to check that we are going as fast as possible. I'm sure PowerPC can
do better. However, the little-endian support mostly leaves main
loops unchanged, so I'm banking on previous authors having done a
good job on big-endian.. As with most code you stare at long enough,
I found some improvements for big-endian too.
Little-endian support for strlen. Like most of the string functions,
I leave the main word or multiple-word loops substantially unchanged,
just needing to modify the tail.
Removing the branch in the power7 functions is just a tidy. .align
produces a branch anyway. Modifying regs in the non-power7 functions
is to suit the new little-endian tail.
* sysdeps/powerpc/powerpc64/power7/strlen.S (strlen): Add little-endian
support. Don't branch over align.
* sysdeps/powerpc/powerpc32/power7/strlen.S: Likewise.
* sysdeps/powerpc/powerpc64/strlen.S (strlen): Add little-endian support.
Rearrange tmp reg use to suit. Comment.
* sysdeps/powerpc/powerpc32/strlen.S: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00090.html
This patch fixes symbol versioning in setjmp/longjmp. The existing
code uses raw versions, which results in wrong symbol versioning when
you want to build glibc with a base version of 2.19 for LE.
Note that the merging the 64-bit and 32-bit versions in novmx-lonjmp.c
and pt-longjmp.c doesn't result in GLIBC_2.0 versions for 64-bit, due
to the base in shlib_versions.
* sysdeps/powerpc/longjmp.c: Use proper symbol versioning macros.
* sysdeps/powerpc/novmx-longjmp.c: Likewise.
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc32/mcount.c: Likewise.
* sysdeps/powerpc/powerpc32/setjmp.S: Likewise.
* sysdeps/powerpc/powerpc64/setjmp.S: Likewise.
* nptl/sysdeps/unix/sysv/linux/powerpc/pt-longjmp.c: Likewise.
http://sourceware.org/ml/libc-alpha/2013-08/msg00089.html
Little-endian fixes for setjmp/longjmp. When writing these I noticed
the setjmp code corrupts the non volatile VMX registers when using an
unaligned buffer. Anton fixed this, and also simplified it quite a
bit.
The current code uses boilerplate for the case where we want to store
16 bytes to an unaligned address. For that we have to do a
read/modify/write of two aligned 16 byte quantities. In our case we
are storing a bunch of back to back data (consective VMX registers),
and only the start and end of the region need the read/modify/write.
[BZ #15723]
* sysdeps/powerpc/jmpbuf-offsets.h: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: Correct
_dl_hwcap access for little-endian.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise. Don't
destroy vmx regs when saving unaligned.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Correct CR load.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Likewise CR save. Don't
destroy vmx regs when saving unaligned.
http://sourceware.org/ml/libc-alpha/2013-08/msg00088.html
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: Increase alignment of
constants to usual value for .cst8 section, and remove redundant
high address load.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: Use float
constant for 0x1p52. Load little-endian words of double from
correct stack offsets.
The pointer guard used for pointer mangling was not initialized for
static applications resulting in the security feature being disabled.
The pointer guard is now correctly initialized to a random value for
static applications. Existing static applications need to be
recompiled to take advantage of the fix.
The test tst-ptrguard1-static and tst-ptrguard1 add regression
coverage to ensure the pointer guards are sufficiently random
and initialized to a default value.
This patch fixes backtrace for PPC32 and PPC64 to correctly handle
signal trampolines. The 'debug/tst-backtrace6.c' also check for
SA_SIGINFO handling, where is triggers another vDSO symbols for PPC32.
Resolves: #15465
The program name may be unavailable if the user application tampers
with argc and argv[]. Some parts of the dynamic linker caters for
this while others don't, so this patch consolidates the check and
fallback into a single macro and updates all users.
This patch fix the 3c0265394d commits
by correctly setting minimum architecture for modf PPC optimization
to power5+ instead of power5 (since only on power5+ round/ceil will
be inline to inline assembly).
The branch prediction hints is actually hurts performance in this case.
The assembly implementation make two assumptions: 1. 'fabs (x) < 2^52'
is unlikely and 2. 'x > 0.0' is unlike (if 1. is true). Since it a
general floating point function, expected input is not bounded and then
it is better to let the hardware handle the branches.
Initially based on the versions found in wcsmbs/* ; these files have
been changed by hand unrolling, and adding some additional variables
to allow some read-ahead to occur, which then relieves some of the
wait-for-increment/wait-for-load/wait-for-compare-results pressure
that was slowing down every iteration through the while-loop.
For 64-bit Power7, These changes give an approx 20% throughput boost
for the wcschr and wcsrchr functions; and approx 40% boost for the
wcscpy function. 32-bit improvements appear to be slightly better
with ~ %30 and ~ %45 respectively. Results for Power6 closely match
those for power7.
Assorted tweaking, twisting and tuning to squeeze a few additional cycles
out of the memchr code. Changes include bypassing the shift pairs
(sld,srd) when they are not required, and unrolling the small_loop that
handles short and trailing strings.
Per scrollpipe data measuring aligned strings for 64-bit, these changes
save between five and eight cycles (9-13% overall) for short strings (<32),
Longer aligned strings see slight improvement of 1-3% due to bypassing the
shifts and the instruction rearranging.
In the past the "-ftree-loop-linear" switch provided a measurable
improvement in performance for certain functions. At some point it
was assigned as the responsibility of Graphite in GCC. It has been
found that even with Graphite enabled these flags no longer perform
any appreciable improvement over the baseline.
Graphite now has some open bugs which need to be fixed in order for it
to provide measurable performance improvements but it lacks active
development. As a result some compiler distributors may disable
Graphite. If Graphite is disabled then building GLIBC will fail if
the "-ftree-loop-linear" switch is used.
This patch removes the use of "-ftree-loop-linear" as unnecessary.
This patch provides optimized logb (1.2x on PPC32 and 2.5x on PPC64),
logbf (1.1x on PPC32 and 2.2x on PPC64), and logbl (1.3x on PPC32 and
50% on PPC64) for the POWER7 processor.
* sysdeps/powerpc/powerpc32/crti.S: New file.
* sysdeps/powerpc/powerpc32/crtn.S: New file.
* sysdeps/powerpc/powerpc64/crti.S: New file.
* sysdeps/powerpc/powerpc64/crtn.S: New file.
This patch tries to organize the implies files for ppc, since there are
a number of processors and most of them are compatible with each other
(backwards compatible).
Having in mind that we start the search for processor-specific files in
the sysdeps/unix/sysv/linux tree
(sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]/fpu to be
exact), we would like to grab any linux-specific code from that tree
prior to going through the other tree (sysdeps/powerpc/...).
For that, i removed the Implies files that were originally inside the
fpu directories and placed then in the non-fpu directories (still inside
the unix/sysv/linux tree). If no processor-specific/linux-specific files
could be found, we "imply" the other tree's (sysdeps/powerpc/...) fpu
directory for that specific processor AND also the non-fpu directory for
that same tree.
If, again, no processor-specific code is found, we read another Implies
file that will point to the most compatible processor that we should
grab code from, and so on, until we reach the power4 processor.
So, in summary, the Implies files will live inside these directories
now:
* sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/[processor]
* sysdeps/powerpc/powerpc[32|64]/[processor]
Practical example of the order we will use to pick power6-specific code
with the new structure.
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/unix/sysv/linux/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power6/fpu ->
sysdeps/powerpc/powerpc[32|64]/power6 ->
sysdeps/powerpc/powerpc[32|64]/power5+/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5+ ->
sysdeps/powerpc/powerpc[32|64]/power5/fpu ->
sysdeps/powerpc/powerpc[32|64]/power5 ->
sysdeps/powerpc/powerpc[32|64]/power4/fpu ->
sysdeps/powerpc/powerpc[32|64]/power4 (from here, it'll go to the
generic path as usual)
2008-11-13 Ryan S. Arnold <rsa@us.ibm.com>
[BZ #6411]
* sysdeps/powerpc/fpu/Makefile: Added test case tst-setcontext-fpscr.
* sysdeps/powerpc/fpu/feholdexcpt.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/fenv_libc.h (fesetenv_register): Dynamically
choose mtfsf insn based on PPC_FEATURE_HAS_DFP.
(relax_fenv_state): Same as above.
(FPSCR_29): Reserve bit in ISA 2.05.
(FPSCR_NI): Provide define for compat.
* sysdeps/powerpc/fpu/fesetenv.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/feupdateenv.c (_FPU_MASK_ALL): Define to replace
magic numbers.
* sysdeps/powerpc/fpu/tst-setcontext-fpscr.c: New file. Test case to
test setcontext and swapcontext with dynamic 64-bit FPSCR detection.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S (__longjmp): Adjust
access to hwcap to account for hwcap size increase to uint64_t.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S (__sigsetjmp ):
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S
(*setcontext): Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/setcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/swapcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S
(*setcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP. Adjust access to hwcap to account for hwcap size
increase to uint64_t.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S
(*swapcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP. Adjust access to hwcap to account for hwcap size
increase to uint64_t.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/setcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/swapcontext.S:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S
(*setcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S
(*swapcontext): dynamically select mtfsf insn based on
PPC_FEATURE_HAS_DFP.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S (__lround): Fixed erroneous
result when x is +/-nextafter(+/-0.5,-/+1) i.e. all 1's in the
mantissa.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S (__llround):
Likewise. Also account for when x is an odd number between 2^52
and 2^53-1.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S (__llround): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S (__llroundf): Likewise.
* math/libm-test.inc (lround_test, llround_test): Added test cases to
detect aforementioned erroneous conditions.
* sysdeps/powerpc/powerpc32/power4/hp-timing.h: New file.
* sysdeps/powerpc/powerpc64/hp-timing.h [_ARCH_PWR4] (HP_TIMING_NOW):
For ISA 2.01 and later replace mftb with mfspr 268.
* sysdeps/i386/i686/memcpy.S: Optimize copying of equally aligned
buffers.
* sysdeps/powerpc/powerpc32/power5/fpu/s_isnanf.S: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/s_isnanf.S: New file.
* sysdeps/powerpc/powerpc64/power5/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc64/power6/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_isnan.S: New file.
* sysdeps/powerpc/powerpc32/power5/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power6/fpu/Implies: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/970/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power6/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/970/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power4/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power5/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power5+/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/power6x/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/970/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power4/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power5/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power5+/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6/fpu/Implies:
New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/power6x/fpu/Implies:
New file.
2007-05-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrint.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrintf.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llrintf.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llround.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llround.S: To here.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llroundf.S: Move.
* sysdeps/powerpc/powerpc32/power4/fpu/s_llroundf.S: To here.
2007-05-22 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S
(LONG_DOUBLE_COMPAT): Specify correct version, GLIBC_2_1.
2007-05-21 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/fpu/slowexp.c: New file.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/slowexp.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/w_sqrt.c: New file.
2007-03-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S
[LONG_DOUBLE_COMPAT]: Add compat_symbol for llrintl@@GLIBC_2_1.
2006-02-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrint.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llrintf.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llround.S: New File
* sysdeps/powerpc/powerpc32/power6/fpu/s_llroundf.S: New File
2006-10-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/fpu/slowpow.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/slowpow.c: New file.
2006-10-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llroundf.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/Makefile: Moved.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/mpa.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/Makefile: To here.
* sysdeps/powerpc/powerpc32/power4/fpu/mpa.c: Likewise.
2006-09-29 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lrint.S: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llrint.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/s_llround.S: New file.
2006-09-28 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_llroundf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc32/power6x/fpu/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_llround.S: New file.
* sysdeps/powerpc/powerpc64/power6x/fpu/Implies: New file.
2006-08-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/Makefile: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/mpa.c: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/Makefile: New file.
* sysdeps/powerpc/powerpc64/power4/fpu/mpa.c: New file.
2006-06-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_trunc.S: New file.
* sysdeps/powerpc/powerpc32/power5+/fpu/s_truncf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_trunc.S: New file.
* sysdeps/powerpc/powerpc64/power5+/fpu/s_truncf.S: New file.
2006-03-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrint.S: New file.
* sysdeps/powerpc/powerpc32/powerpc64/fpu/s_llrintf.S: New file.
2007-06-01 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/memset.S: New file.
* sysdeps/powerpc/powerpc64/power6/memset.S: New file.
2007-05-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/970/Implies: New file.
* sysdeps/powerpc/powerpc32/power5/Implies: New file.
* sysdeps/powerpc/powerpc32/power5+/Implies: New file.
* sysdeps/powerpc/powerpc32/power6/Implies: New file.
* sysdeps/powerpc/powerpc32/power6x/Implies: New file.
* sysdeps/powerpc/powerpc64/970/Implies: New file.
* sysdeps/powerpc/powerpc64/power5/Implies: New file.
* sysdeps/powerpc/powerpc64/power5+/Implies: New file.
* sysdeps/powerpc/powerpc64/power6/Implies: New file.
* sysdeps/powerpc/powerpc64/power6x/Implies: New file.
2007-05-21 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/memset.S: New file
2007-03-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/memcpy.S: Improve aligned loop to minimize
branch miss-predicts. Ensure that cache line crossing does not impact
dispatch grouping.
2006-12-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/power4/memcopy.h: Replace with include
"../../powerpc32/power4/memcopy.h".
* sysdeps/powerpc/powerpc64/power4/wordcopy.c: Replace with include
"../../powerpc32/power4/wordcopy.c".
2006-10-03 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/powerpc64/Makefile: Moved.
* sysdeps/powerpc/powerpc32/powerpc64/memcopy.h: Likewise.
* sysdeps/powerpc/powerpc32/powerpc64/wordcopy.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/Makefile: To here.
* sysdeps/powerpc/powerpc32/power4/memcopy.h: Likewise.
* sysdeps/powerpc/powerpc32/power4/wordcopy.c: Likewise.
2006-09-10 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/memcpy.S: New file.
2006-08-31 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power6/wordcopy.c: New file.
* sysdeps/powerpc/powerpc32/powerpc64/Makefile: New file.
* sysdeps/powerpc/powerpc32/powerpc64/memcopy.h: New file.
* sysdeps/powerpc/powerpc32/powerpc64/wordcopy.c: New file.
* sysdeps/powerpc/powerpc64/power4/Makefile: New file.
* sysdeps/powerpc/powerpc64/power4/memcopy.h: New file.
* sysdeps/powerpc/powerpc64/power4/wordcopy.c: New file.
* sysdeps/powerpc/powerpc64/power6/wordcopy.c: New file.
2006-07-06 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/power6/memcpy.S: New file.
2006-03-20 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/power4/memcmp.S: New file.
* sysdeps/powerpc/powerpc32/power4/memcpy.S: New file.
* sysdeps/powerpc/powerpc32/power4/memset.S: New file.
* sysdeps/powerpc/powerpc32/power4/strncmp.S: New file.
* sysdeps/powerpc/powerpc64/power4/memcmp.S: New file.
* sysdeps/powerpc/powerpc64/power4/memcpy.S: New file.
* sysdeps/powerpc/powerpc64/power4/strncmp.S: New file.
2006-04-03 Steven Munroe <sjmunroe@us.ibm.com>
[BZ #2505]
* sysdeps/powerpc/powerpc32/bits/atomic.h [_ARCH_PWR4]:
Define atomic_read_barrier and __ARCH_REL_INSTR using lwsync.
of non-volatile floating-point registers to the stack (fp14-fp31).
* sysdeps/powerpc/powerpc32/gprsave0.S: Add cfi_offset for spilling of
non-volatile general-purpose registers to the stack (gpr13-gpr31).
* sysdeps/powerpc/powerpc64/dl-trampoline.S: Add cfi_offset
for non-volatiles gpr30 - grp31 spilled to the stack.
* sysdeps/powerpc/powerpc64/memcpy.S: Add cfi_offset for non-volatile
gpr31 spill to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S:
Add cfi_offset for non-volatile gpr31 spill to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/clone.S: Add cfi_offset
for non-volatiles gpr28 - grp31 spilled to the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/getcontext.S: Add
cfi_adjust_cfa_offset when a frame is stacked.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/setcontext.S:
(__novec_setcontext) : Add cfi_offset for non-volatile gpr31 spill
add LR saved to the stack. Add cfi_adjust_cfa_offset when frame is
stacked.
(__setcontext) : Add cfi_offset for non-volatile gpr31 spill to
the stack.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/swapcontext.S:
(__novec_swapcontext) : Add cfi_offset for non-volatile gpr31 spill
add LR saved to the stack.
(__swapcontext) : Add cfi_offset for non-volatile gpr31 spill add LR
saved to the stack. Add cfi_adjust_cfa_offset when frame is stacked.
* elf/check-textrel.c: Include config.h.
(AB(handle_file)): Don't fail if PF_X | PF_W on architectures known
to have executable writable PLT.
* sysdeps/powerpc/powerpc32/configure.in (HAVE_PPC_SECURE_PLT): New
test.
* config.h.in (HAVE_PPC_SECURE_PLT): Add.
* malloc/malloc.c (MALLOC_ALIGNMENT): Set to __alignof__ (long double)
if long double is more aligned than 2 * SIZE_SZ.
(misaligned_chunk): Define.
(public_rEALLOc, _int_free, _int_realloc): Use it.
Jakub Jelinek <jakub@redhat.com>
Roland McGrath <roland@redhat.com>
Steven Munroe <sjmunroe@us.ibm.com>
Alan Modra <amodra@bigpond.net.au>
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S: Comment fix.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_llroundf.S: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* math/libm-test.inc (check_float_internal): Allow ulp <= 0.5.
(erfc_test): Don't run erfcl (27.0L) test if erfcl (27.0L) is
denormal.
[TEST_LDOUBLE] (ceil_test, floor_test, llrint_test, llround_test,
rint_test, round_test, trunc_test): Add new tests.
* sysdeps/powerpc/powerpc32/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_ceill.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_copysignl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabs.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fdim.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_floorl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmax.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_fmin.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_isnan.c: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_llroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lrintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_lroundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_rintl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_roundl.S: New file.
* sysdeps/powerpc/powerpc64/fpu/s_truncl.S: New file.
* sysdeps/unix/sysv/linux/powerpc/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/Implies: New file.
* sysdeps/unix/sysv/linux/powerpc/configure.in: New file.
* sysdeps/unix/sysv/linux/powerpc/configure: New file.
* sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h
(__LONG_DOUBLE_MATH_OPTIONAL): Define.
(__NO_LONG_DOUBLE_MATH): Define.
* sysdeps/unix/sysv/linux/powerpc/nldbl-abi.h: New file.
* sysdeps/powerpc/fpu/s_isnan.c: Include math_ldbl_opt.h.
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl, lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_llround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llroundl, lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (ceill): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_copysign.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (copysignl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (floorl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_llrint.c: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (llrintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (lroundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (rintl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (roundl): Add compatibility symbols.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: Include math_ldbl_opt.h.
[LONG_DOUBLE_COMPAT] (truncl): Add compatibility symbols.
* misc/qefgcvt_r.c [LDBL_MIN_10_EXP == -291] (FLOAT_MIN_10_NORM): New.
* sysdeps/powerpc/fpu/bits/mathdef.h (__NO_LONG_DOUBLE_MATH): Remove.
* sysdeps/powerpc/Implies: Add ieee754/ldbl-128ibm.
* sysdeps/powerpc/powerpc32/Implies: Remove powerpc/soft-fp.
* sysdeps/ieee754/ldbl-128ibm/Makefile: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acoshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_acosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_asinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atan2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_atanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_coshl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_fmodl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_gammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_hypotl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j0l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_j1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_lgammal_r.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log10l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_log2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_logl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_powl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_rem_pio2l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ieee754.h: New file.
* sysdeps/ieee754/ldbl-128ibm/k_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/k_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/ldbl2mpn.c: New file.
* sysdeps/ieee754/ldbl-128ibm/math_ldbl.h: New file.
* sysdeps/ieee754/ldbl-128ibm/mpn2ldbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/printf_fphex.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_asinhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_atanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cbrtl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_cosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_erfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_expm1l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fabsl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_finitel.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_fpclassifyl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_frexpl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ilogbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isinfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_isnanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_log1pl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_logbl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_modfl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalblnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_scalbnl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_signbitl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_sinl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanhl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_tanl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/strtold_l.c: New file.
* sysdeps/ieee754/ldbl-128ibm/t_sincosl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/w_expl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_copysignl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_llroundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lrintl.c: New file.
* sysdeps/ieee754/ldbl-128ibm/s_lroundl.c: New file.
* sysdeps/ieee754/ldbl-128/e_powl.c: Fix old comment.
directive to ENTRY macros.
(END): Add cfi_endproc directive to END macro.
* sysdeps/powerpc/powerpc64/sysdep.h (ENTRY, EALIGN): Add cfi_startproc
directive to ENTRY macros.
(END, END_GEN_TB): Add cfi_endproc directive to END macros.
* sysdeps/powerpc/powerpc32/dl-start.S: Remove ENTRY()s for
_dl_start_user and _dl_main_dispatch.
* sysdeps/powerpc/powerpc32/fpu/fprrest.S: Use END macro.
* sysdeps/powerpc/powerpc32/fpu/fprsave.S: Use Likewise.
* sysdeps/powerpc/powerpc32/gprrest0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprrest1.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave0.S: Likewise.
* sysdeps/powerpc/powerpc32/gprsave1.S: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/socket.S: Remove redundant
cfi_startproc and cfi_endproc.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/socket.S: Likewise.
2006-01-04 Ulrich Drepper <drepper@redhat.com>
* sysdeps/pthread/aio_misc.h (struct waitlist): Add result member.
* sysdeps/pthread/aio_notify.c (__aio_notify): For synchronous waiters,
failed I/O, and a result pointer, set value to -1.
* sysdeps/pthread/aio_suspend.c: Initialize result pointer to NULL.
* sysdeps/pthread/lio_listio.c: For LIO_WAIT, point result pointer in
wait list to local variable result. If nonzero afterwards, set errno
to EIO. For LIO_NOWAIT set result to NULL.
* rt/Makefile (tests): Add tst-aio8.
* rt/tst-aio8.c: New file.
value doesn't survive in a registers when the function returns.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Jakub Jelinek <jakub@redhat.com>
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Define
PTR_MANGLE2.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Define
PTR_MANGLE2 and PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Use PTR_DEMANGLE2.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Use PTR_MANGLE2.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Likewise.
* sysdeps/powerpc/powerpc32/setjmp-common.S: Likewise.
2005-12-30 Ulrich Drepper <drepper@redhat.com>
Tom Gall <tom_gall@vnet.ibm.com>
* elf/rtld.c (dl_main): Initialize l_local_scope for sysinfo_map.
* sysdeps/powerpc/elf/libc-start.c: Move this...
* sysdeps/unix/sysv/linux/powerpc/libc-start.c: ...to here.
* sysdeps/powerpc/powerpc32/dl-start.S: Add _dl_main_dispatch label.
* sysdeps/powerpc/powerpc32/hp-timing.h: New file.
* sysdeps/unix/sysv/linux/powerpc/Versions: New file.
* sysdeps/unix/sysv/linux/clock_getres.c: If HAVE_CLOCK_GETRES_VSYSCALL
is not defined, redefine INTERNAL_VSYSCALL and INLINE_VSYSCALL to
INTERNAL_SYSCALL and INLINE_SYSCALL respectively. Otherwise include
<bits/libc-vdso.h>. Use INLINE_VSYSCALL and INTERNAL_SYSCALL instead
of the normal versions throughout the code.
* sysdeps/unix/sysv/linux/clock_gettime.c: Likewise if
HAVE_CLOCK_GETTIME_VSYSCALL is defined.
* sysdeps/unix/sysv/linux/powerpc/bits/libc-vdso.h: New file.
* sysdeps/unix/sysv/linux/powerpc/dl-vdso.c: New file.
* sysdeps/unix/sysv/linux/powerpc/dl-vdso.h: New file.
* sysdeps/unix/sysv/linux/powerpc/get_clockfreq.c: Use vDSO.
* sysdeps/unix/sysv/linux/powerpc/gettimeofday.c: New file.
* sysdeps/unix/sysv/linux/powerpc/Makefile: Add dl-vdso to routines.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h: Define
INLINE_VSYSCALL, INTERNAL_VSYSCALL, INTERNAL_SYSCALL_NCS,
INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, HAVE_CLOCK_GETRES_VSYSCALL,
and HAVE_CLOCK_GETTIME_VSYSCALL.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h: Likewise.
* intl/dcigettext.c (_nl_find_msg): Add a cast.
* nis/nis_clone_dir.c (nis_clone_directory): Use char * for ADDR.
* nis/nis_clone_obj.c (nis_clone_object): Likewise.
* nis/nis_clone_res.c (nis_clone_result): Likewise.
* resolv/nss_dns/dns-network.c (getanswer_r): Use const unsigned char *
for END_OF_MESSAGE and CP.
* resolv/res_send.c (send_dg): Add else branch for case impossible
unless `poll' is buggy.
* crypt/crypt_util.c (__setkey_r): Add a cast.
* locale/programs/linereader.c (get_toplvl_escape): Use size_t for
NBYTES, and unsigned char * for BYTES.
* locale/programs/charmap.c (charmap_new_char): Use size_t and
unsighed char * for NBYTES, BYTES parameters.
* sysdeps/generic/dl-hash.h (_dl_elf_hash): Take const char * argument
and cast it.
* sysdeps/i386/i686/dl-hash.h (_dl_elf_hash): Likewise.
* sunrpc/create_xid.c (_create_xid): Don't use unsigned long for RES.
* sunrpc/svcauth_des.c (_svcauth_des): Fix cast type.
* sunrpc/auth_des.c (authdes_create): Don't use u_char for PKEY_DATA.
(authdes_marshal): Don't use unsigned int for LEN.
* sunrpc/xdr.c (xdr_hyper): Don't use unsigned long for T2.
(xdr_u_hyper): Likewise.
(xdr_u_short): Don't use u_long for L.
* sunrpc/xdr_intXX_t.c (xdr_int64_t): Don't use uint32_t for T2.
* inet/rexec.c (rexec_af): Use socklen_t.
* sunrpc/key_call.c (getkeyserv_handle): Likewise.
* sunrpc/rtime.c (rtime): Likewise.
* resolv/res_send.c (send_vc, send_dg): Likewise.
* nis/nis_callback.c (__nis_create_callback): Likewise.
* sysdeps/generic/libc-start.c: Use unsigned int for nthreads ptr.
* sysdeps/posix/getaddrinfo.c (gaih_inet): Fix type of ADDR local.
* libio/libio.h (_IO_BE): Add parenthesis around EXPR.
* intl/dcigettext.c (INTVARDEF, INTUSE): Macros removed.
(_nl_default_dirname): Use libc_hidden_data_def instead of INTVARDEF.
(libc_freeres_fn, DCIGETTEXT): Don't use INTUSE.
* intl/bindtextdom.c (INTUSE): Macro removed.
(_nl_default_dirname): Use libc_hidden_proto.
(set_binding_values): Don't use INTUSE.
* include/libintl.h (_libc_intl_domainname_internal): Decl removed.
(_libc_intl_domainname): Use libc_hidden_proto.
* posix/regex_internal.h (gettext): Remove INTUSE on it.
* locale/SYS_libc.c (_libc_intl_domainname): Use libc_hidden_data_def
rather than INTDEF.
* include/libintl.h (_): Don't use *_internal name.
* ctype/ctype-extn.c (__ctype_tolower, __ctype_toupper): Use int32_t,
not uint32_t.
* locale/lc-ctype.c (_nl_postload_ctype): Likewise for assignments.
* iconv/gconv_open.c (__gconv_open): Remove useless cast.
[BZ #721]
* sysdeps/i386/dl-machine.h (ELF_MACHINE_NO_RELA): Define this outside
of [RESOLVE_MAP].
* sysdeps/sh/dl-machine.h (ELF_MACHINE_NO_REL): Likewise.
* sysdeps/powerpc/powerpc32/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
* sysdeps/powerpc/powerpc64/dl-machine.h
(elf_machine_rel, elf_machine_rel_relative): Removed.
2005-02-03 Alexandre Oliva <aoliva@redhat.com>
[BZ #721]
* elf/dynamic-link.h: Don't declare nested auto functions that are
not going to be defined.
2004-07-23 Jakub Jelinek <jakub@redhat.com>
[BZ #284]
* include/features.h (_POSIX_SOURCE, _POSIX_C_SOURCE): Define
if _XOPEN_SOURCE >= 500 even if __STRICT_ANSI__ is defined.
2005-02-16 Roland McGrath <roland@redhat.com>
* sysdeps/powerpc/powerpc32/dl-machine.c (__elf_machine_runtime_setup):
If profile != 0 does not anymore mean GLRO(dl_profile) != NULL.
* sysdeps/powerpc/powerpc32/bits/link.h: Fix types of some fields in
the register and result structures.
* sysdeps/powerpc/powerpc64/bits/link.h: Fix types of some fields
in the 32-bit register and result structures.
* sysdeps/powerpc/powerpc32/dl-trampoline.S (_dl_prof_resolve):
Extend _dl_prof_resolve to add pass extra parameters to
_dl_profile_fixup and set up structure with register content.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/__longjmp-common.S: Make no_vmx symbol
local.
* sysdeps/powerpc/powerpc64/setjmp-common.S: Make no_vmx and
aligned_save_vmx symbol local.
2004-07-05 Ulrich Drepper <drepper@redhat.com>
* elf/dl-init.c: Don't define and use _dl_starting_up if
HAVE_INLINED_SYSCALLS is defined and the variable is not used.
* elf/dl-support.c: Likewise.
* elf/rtld.c: Likewise.
* elf/dl-misc.c (_dl_debug_vdprintf): Use writev syscall directly
if HAVE_INLINED_SYSCALLS is defined.
* sysdeps/powerpc/powerpc64/dl-machine.h: Don't rest _dl_starting_up
here.
* sysdeps/powerpc/powerpc32/dl-start.S: Likewise.
* sysdeps/unix/sysv/linux/configure.in: Define HAVE_INLINED_SYSCALLS.
* config.h.in: Add entry for HAVE_INLINED_SYSCALLS.
* sysdeps/posix/profil.c: If compiled for ld.so, omit code which
is needed to stop profiling.
* elf/dl-open.c (dl_open_worker): If a newly opened object is to be
profile make sure it cannot be unloaded.
* sysdeps/unix/sysv/linux/dl-origin.c: Inline readlink syscall.
* sysdeps/unix/sysv/linux/fcntl.c: If compiled without cancellation
support, make sure the helper function is inlined.
* sysdeps/unix/sysv/linux/pread.c: Likewise.
* sysdeps/unix/sysv/linux/pwrite.c: Likewise.
* sysdeps/unix/sysv/linux/i386/fcntl.c: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/fcntl.c: Likewise.
2004-07-05 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/novmx-longjmp.c (__libc_longjmp,
__libc_siglongjmp): Remove symbol_version.
* sysdeps/powerpc/longjmp.c (__libc_longjmp, __libc_siglongjmp):
Export @@GLIBC_PRIVATE, not @@GLIBC_2.3.4.
* sysdeps/powerpc/sigjmp.c (__sigjmp_save): Use strong_alias
unconditionally.
* sysdeps/powerpc/novmx-sigjmp.c (__sigjmp_save): Remove.
* sysdeps/powerpc/powerpc32/__longjmp.S (__longjmp): Use
strong_alias instead of default_symbol_version, remove
symbol_version.
* sysdeps/powerpc/powerpc64/__longjmp.S (__longjmp): Likewise.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S (__novmx__setjmp): Change
into strong_alias to __novmxsetjmp.
(__vmx__setjmp): Similarly with __vmxsetjmp.
(__setjmp): Make it strong_alias to __vmx__setjmp, remove
default_symbol_version and symbol_version.
* sysdeps/powerpc/powerpc64/bsd-setjmp.S (__novmx__setjmp): Change
into strong_alias to __novmxsetjmp.
(__vmx__setjmp): Similarly with __vmxsetjmp.
(__setjmp): Make it strong_alias to __vmx__setjmp, remove
default_symbol_version and symbol_version.
* nscd/nscd_getgr_r.c: Include stdio-common/_itoa.h.
2004-06-11 Dwayne Grant McConnell <dgm69@us.ibm.com>
* sysdeps/powerpc/fpu/s_lround.c: Removed.
* sysdeps/powerpc/fpu/s_lroundf.c: Removed.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.c: Removed.
* sysdeps/powerpc/powerpc32/fpu/s_lrint.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_lroundf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_lround.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_round.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S: New file.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S: New file.
2004-05-25 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/fpu/Makefile: Make ld.so a dependency of libm.so.
* sysdeps/powerpc/fpu/bits/mathinline.h [__LIBC_INERNAL_MATH_INLINES]
(__ieee754_sqrt): Define as __MATH_INLINE using fsqrt instruction.
(__ieee754_sqrtf): Define as __MATH_INLINE using fsqrts instruction.
* sysdeps/powerpc/fpu/e_sqrt.c (__slow_ieee754_sqrt): Moved
implementation from w_sqrt.c.
* sysdeps/powerpc/fpu/e_sqrtf.c (__slow_ieee754_sqrtf): Moved
implementation from w_sqrtf.c.
* sysdeps/powerpc/fpu/w_sqrt.c (__sqrt): Wrapper implementation
using inline __ieee754_sqrt().
* sysdeps/powerpc/fpu/w_sqrtf.c (__sqrtf): Wrapper implementation
using inline __ieee754_sqrtf().
* sysdeps/powerpc/powerpc32/sysdep.h [__ASSEMBLER__]: Include
<sysdeps/powerpc/sysdep.h> independent of __ASSEMBLER__.
* sysdeps/powerpc/sysdep.h [__ASSEMBLER__] (PPC_FEATURE_*): Define
PPC_FEATURE_* independent of __ASSEMBLER__.
2004-05-25 Jakub Jelinek <jakub@redhat.com>
* sysdeps/pthread/aio_notify.c: Use <> instead of "" for aio_misc.h
include.
(aio_start_notify_thread): Define if not defined.
(notify_func_wrapper): Use it.
* sysdeps/pthread/aio_misc.c: Use <> instead of "" for aio_misc.h
include.
(aio_create_helper_thread): Define if not defined.
(__aio_create_helper_thread): New function.
(__aio_enqueue_request): Use aio_create_helper_thread.
* nis/ypclnt.c (ypall_data, ypall_foreach): Remove.
(struct ypresp_all_data): New type.
(__xdr_ypresp_all): Change second argument to
struct ypresp_all_data *. Replace ypall_foreach and
ypall_data with objp->foreach and objp->data.
(yp_all): Remove status variable, add data. Replace
all uses of status with data.status. Initialize data.foreach
and data.data instead of ypall_foreach and ypall_data.
2004-05-24 Jakub Jelinek <jakub@redhat.com>
* elf/dl-lookup.c (add_dependency): Set DF_1_NODELETE bit
in l_flags_1, not in l_flags.
* sysdeps/powerpc/powerpc32/__longjmp.S (JB_SIZE): Undefine before
including __longjmp-common.S again.
* sysdeps/powerpc/powerpc64/__longjmp.S (JB_SIZE): Likewise.
* sysdeps/powerpc/powerpc32/setjmp.S (JB_SIZE): Undefine before
including setjmp-common.S again.
* sysdeps/powerpc/powerpc64/setjmp.S (JB_SIZE): Likewise.
* sysdeps/powerpc/novmxsetjmp.h (__novmx__longjmp): Fix type of
first argument in the prototype.
* sysdeps/powerpc/longjmp.c (__vmx__longjmp, __vmx__libc_longjmp):
Remove bogus semicolons.
2004-02-13 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc64/__longjmp-common.S: New file.
* sysdeps/powerpc/powerpc64/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc64/bsd-_setjmp.S [NOT_IN_libc](_setjmp):
Non-versioned _setjmp for rtld-_setjmp.
[!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define
as default version of _setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx_setjmp): Original version of _setjmp.
* sysdeps/powerpc/powerpc64/bsd-setjmp.S (__vmxsetjmp): Branch to
__vmx__sigsetjmp and define as default version of setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmxsetjmp): Original version of setjmp.
* sysdeps/powerpc/powerpc64/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc64/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_3, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/powerpc32/__longjmp-common.S: New File
* sysdeps/powerpc/powerpc32/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc32/bsd-_setjmp.S [NOT_IN_libc](_setjmp):
Non-versioned _setjmp for rtld-_setjmp.
[!NOT_IN_libc](__vmx_setjmp): Branch to __vmx__sigsetjmp and define
as default version of _setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx_setjmp): Original version of _setjmp.
* sysdeps/powerpc/powerpc32/bsd-setjmp.S (__vmxsetjmp): Branch to
__vmx__sigsetjmp and define as default version of setjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmxsetjmp): Original version of setjmp.
* sysdeps/powerpc/powerpc32/fpu/__longjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/fpu/__longjmp.S [NOT_IN_libc](__longjmp):
Non-versioned __longjmp for rtld-__longjmp.
[!NOT_IN_libc](__vmx__longjmp): Add VMX reg support and define as
default version of __longjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__longjmp): Original version of __longjmp.
* sysdeps/powerpc/powerpc32/fpu/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/fpu/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/powerpc32/setjmp-common.S: New file.
* sysdeps/powerpc/powerpc32/setjmp.S [NOT_IN_libc](__setjmp):
Non-versioned __sigsetjmp for rtld-setjmp.
[!NOT_IN_libc](__vmx__sigsetjmp): Add VMX reg support and define
as default version of __sigsetjmp.
[SHARED && SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_3_4)]
(__novmx__sigsetjmp): Original version of __sigsetjmp.
* sysdeps/powerpc/Dist: New File.
* sysdeps/powerpc/Makefile (sysdep_routines): Add novmx-longjmp.c
and novmx-sigjmp.c
* sysdeps/powerpc/Versions (libc): To GLIBC_2.3_4 add _longjmp,
__sigsetjmp, _setjmp, longjmp, and setjmp. To GLIBC_PRIVATE add
__novmx__libc_longjmp, __novmx__libc_siglongjmp, __vmx__libc_longjmp,
and __vmx__libc_siglongjmp.
* sysdeps/powerpc/bits/setjmp.h: Define JB_VRSAVE, JB_VRS, and adjust
JB_SIZE to add VMX regs to __jmp_buf.
* sysdeps/powerpc/longjmp.c: New file.
* sysdeps/powerpc/novmxsetjmp.h: New file.
* sysdeps/powerpc/novmx-longjmp.c: New file.
* sysdeps/powerpc/novmx-sigjmp.c: New file.
* sysdeps/powerpc/sigjmp.c: New file.
2004-02-06 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/powerpc32/dl-machine.c: Declare __cache_line_size as
weak extern.
(__elf_machine_runtime_setup): Invalidate the instruction cache over
the whole range of the PLT.
2003-04-16 Jakub Jelinek <jakub@redhat.com>
* elf/Makefile (distribute): Add tst-tlsmod{[7-9],1[0-2]}.c and
tst-tls10.h.
(tests): Add tst-tls1[0-2].
(modules-names): Add tst-tlsmod{[7-8],1[0-2]}.
($(objpfx)tst-tlsmod8.so): Depend on tst-tlsmod7.so.
($(objpfx)tst-tlsmod10.so): Depend on tst-tlsmod9.so.
($(objpfx)tst-tlsmod12.so): Depend on tst-tlsmod11.so.
($(objpfx)tst-tls10): Depend on tst-tlsmod8.so.
($(objpfx)tst-tls11): Depend on tst-tlsmod10.so.
($(objpfx)tst-tls12): Depend on tst-tlsmod12.so.
* elf/tst-tls10.c: New test.
* elf/tst-tls11.c: New test.
* elf/tst-tls12.c: New test.
* elf/tst-tls10.h: New file.
* elf/tst-tlsmod7.c: New file.
* elf/tst-tlsmod8.c: New file.
* elf/tst-tlsmod9.c: New file.
* elf/tst-tlsmod10.c: New file.
* elf/tst-tlsmod11.c: New file.
* elf/tst-tlsmod12.c: New file.
2003-04-15 Steven Munroe <sjmunroe@us.ibm.com>
* sysdeps/powerpc/bits/atomic.h: Moved ppc32/64 specific code to ...
* sysdeps/powerpc/powerpc32/bits/atomic.h: New file.
* sysdeps/powerpc/powerpc64/bits/atomic.h: New file.
* posix/regex.h: Include <sys/types.h>.
2003-04-15 Jakub Jelinek <jakub@redhat.com>
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Avoid
checking R_PPC_RELATIVE, R_PPC_NONE and whether relocation is
against local symbol in conflict processing.
(LIBC_START_MAIN, LIBC_START_MAIN_AUXVEC_ARG, MAIN_AUXVEC_ARG)
(INIT_MAIN_ARGS): Define, and #include <sysdeps/generic/libc-start.c>.
(__libc_start_main): Just call the generic one for most of the work.
* sysdeps/generic/libc-start.c [LIBC_START_MAIN]: If defined, define a
static function by that name instead of BP_SYM (__libc_start_main).
[LIBC_START_MAIN_AUXVEC_ARG]: Take AUXVEC as argument.
[MAIN_AUXVEC_ARG]: Pass 4th argument to MAIN.
[INIT_MAIN_ARGS]: Give INIT the same args as MAIN.
* sysdeps/generic/dl-sysdep.c (_dl_sysdep_start) [DL_PLATFORM_AUXV]:
Use this macro for extra AT_* cases.
* sysdeps/unix/sysv/linux/powerpc/dl-sysdep.c (DL_PLATFORM_AUXV):
New macro, guts from ...
(__aux_init_cache): ... here, function removed.
(DL_PLATFORM_INIT): Don't define this.
* sysdeps/powerpc/powerpc32/memset.S: Put __cache_line_size in bss.
* sysdeps/powerpc/powerpc64/memset.S: Likewise.
* Versions.def (libthread_db): Add GLICB_2.3.3 set.
Don't use weak_extern for dl_rtld_map. Instead check only if [SHARED].
(elf_machine_rela): Clean up.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Clean up.
PowerPC TLS support contributed by Paul Mackerras <paulus@samba.org>.
* sysdeps/powerpc/powerpc32/elf/configure.in: New file.
* sysdeps/powerpc/powerpc32/elf/configure: New generated file.
* elf/tls-macros.h [__powerpc__ && !__powerpc64__]
(TLS_LE, TLS_IE, TLS_LD, TLS_GD): Define them.
* sysdeps/powerpc/powerpc32/dl-machine.h (elf_machine_rela): Support
new relocs for TLS.
* sysdeps/powerpc/dl-tls.h (TLS_TP_OFFSET, TLS_DTV_OFFSET): Move these
macros out of [SHARED].
(TLS_TPREL_VALUE, TLS_DTPREL_VALUE): New macros.
* elf/elf.h: Define R_PPC_* relocs for TLS support.
Clean up R_PPC64_* macro definition comments.
