The tessellation levels in Metal are stored as a densely-packed array of
half-precision floating point values. But, stage-in attributes in Metal
have to have offsets and strides aligned to a multiple of four, so we
can't add them individually. Luckily for us, the arrays have lengths
less than 4. So, let's use vectors for them!
Triangles get a single attribute with a `float4`, where the outer levels
are in `.xyz` and the inner levels are in `.w`. The arrays are unpacked
as though we had added the elements individually. Quads get two: a
`float4` with the outer levels and a `float2` with the inner levels.
Further, since vectors can be indexed as arrays, there's no need to
unpack them in this case.
This also saves on precious vertex attributes. Before, we were using up
to 6 of them. Now we need two at most.
In SPIR-V, there are always two inner levels and four outer levels, even
if the input patch isn't a quad patch. But in MSL, due to requirements
imposed by Metal, only one inner level and three outer levels exist when
the input patch is a triangle patch. We must explicitly ignore any write
to the nonexistent second inner and fourth outer levels in this case.
In the bizarre case where the ID of a loaded opaque type aliased with a
literal which was used as part of another texturing instruction, we
could end up with a case where domination analysis assumed the loaded
opaque type needed to be moved to a different scope.
Fix the issue by never doing dominance analysis for opaque temporaries,
and be more robust when analyzing texturing instructions.
Also make sure reflection output is deterministic.
This patch slightly alterered output for some unknown reason, but it came from an
unordered_map, so it's fine.
This is intended to be used to support `VK_KHR_maintenance2`'s
tessellation domain origin feature. If `tess_domain_origin_lower_left`
is `true`, the `v` coordinate will be inverted with respect to the
domain. Additionally, in `Triangles` mode, the `v` and `w` coordinates
will be swapped. This is because the winding order is interpreted
differently in lower-left mode.
These are mapped to Metal's post-tessellation vertex functions. The
semantic difference is much less here, so this change should be simpler
than the previous one. There are still some hairy parts, though.
In MSL, the array of control point data is represented by a special
type, `patch_control_point<T>`, where `T` is a valid stage-input type.
This object must be embedded inside the patch-level stage input. For
this reason, I've added a new type to the type system to represent this.
On Mac, the number of input control points to the function must be
specified in the `patch()` attribute. This is optional on iOS.
SPIRV-Cross takes this from the `OutputVertices` execution mode; the
intent is that if it's not set in the shader itself, MoltenVK will set
it from the tessellation control shader. If you're translating these
offline, you'll have to update the control point count manually, since
this number must match the number that is passed to the
`drawPatches:...` family of methods.
Fixes#120.
This should fix a whole host of issues related to structs in the `Input`
class in a tessellation control shader.
Also, use pointer arithmetic instead of dereferencing the `ops` array.
This is critical in case we wind up stepping beyond the bounds of the
array.
When we force recompile, the old var.self name we used as a fallback
name might have been disturbed, so we should recover certain names back
to their original form in case we are forced to take a recompile to make
the naming algorithm more deterministic.
There's no need to do so, since these are not stage-out structs being
returned, but regular structures being written to a buffer. This also
neatly avoids issues writing to composite (e.g. arrayed) per-patch
outputs from a tessellation control shader.
These are transpiled to kernel functions that write the output of the
shader to three buffers: one for per-vertex varyings, one for per-patch
varyings, and one for the tessellation levels. This structure is
mandated by the way Metal works, where the tessellation factors are
supplied to the draw method in their own buffer, while the per-patch and
per-vertex varyings are supplied as though they were vertex attributes;
since they have different step rates, they must be in separate buffers.
The kernel is expected to be run in a workgroup whose size is the
greater of the number of input or output control points. It uses Metal's
support for vertex-style stage input to a compute shader to get the
input values; therefore, at least one instance must run per input point.
Meanwhile, Vulkan mandates that it run at least once per output point.
Overrunning the output array is a concern, but any values written should
either be discarded or overwritten by subsequent patches. I'm probably
going to put some slop space in the buffer when I integrate this into
MoltenVK to be on the safe side.
This is necessary to deal with indirect draws, where the draw parameters
are given in a buffer instead of passed by the CPU. For normal draws,
the draw parameters are set with Metal's `setVertexBytes:` method.
This undoes the change to add the vertex count to the aux buffer,
rendering that entire discussion largely moot. Oh well. It was a
discussion that needed to happen anyway.
Storage was in place already, so mostly just dealing with bitcasts and
constants.
Simplies some of the bitcasting logic, and this exposed some bugs in the
implementation. Refactor to use correct width integers with explicit bitcast opcodes.
Structs are aligned as you would expect in MSL (maximum member
alignment), and it is not minimum 16 bytes like in std140.
Also rename the dummy "pad" members to a reserved naming scheme.
Apparently we didn't use those yet. MSL seems to be able to alias struct
types and variable types to a degree, so that's why it has escaped
testing until now.
In the past, SPIRV-Cross threw an error in this case because it couldn't
work out which swizzle from the auxiliary buffer needs to be passed.
Now, we pass the swizzle around with the texture object, like a combined
image-sampler and its associated sampler.
If not enough components are provided in the shader,
the shader MSL compiler throws an error rather than make components
undefined. This hurts portability, so we need to add explicit padding
here.
MSL does not support value semantics for arrays (sigh), so we need to
force constant references and deal with copies if we have a different
address space than what we end up guessing.
This is a fairly fundamental change on how IDs are handled.
It serves many purposes:
- Improve performance. We only need to iterate over IDs which are
relevant at any one time.
- Makes sure we iterate through IDs in SPIR-V module declaration order
rather than ID space. IDs don't have to be monotonically increasing,
which was an assumption SPIRV-Cross used to have. It has apparently
never been a problem until now.
- Support LUTs of structs. We do this by interleaving declaration of
constants and struct types in SPIR-V module order.
To support this, the ParsedIR interface needed to change slightly.
Before setting any ID with variant_set<T> we let ParsedIR know
that an ID with a specific type has been added. The surface for change
should be minimal.
ParsedIR will maintain a per-type list of IDs which the cross-compiler
will need to consider for later.
Instead of looping over ir.ids[] (which can be extremely large), we loop
over types now, using:
ir.for_each_typed_id<SPIRVariable>([&](uint32_t id, SPIRVariable &var) {
handle_variable(var);
});
Now we make sure that we're never looking at irrelevant types.
This allows shaders to declare and use pointer-type variables. Pointers
may be loaded and stored, be the result of an `OpSelect`, be passed to
and returned from functions, and even be passed as inputs to the `OpPhi`
instruction. All types of pointers may be used as variable pointers.
Variable pointers to storage buffers and workgroup memory may even be
loaded from and stored to, as though they were ordinary variables. In
addition, this enables using an interior pointer to an array as though
it were an array pointer itself using the `OpPtrAccessChain`
instruction.
This is a rather large and involved change, mostly because this is
somewhat complicated with a lot of moving parts. It's a wonder
SPIRV-Cross's output is largely unchanged. Indeed, many of these changes
are to accomplish exactly that! Perhaps the largest source of changes
was the violation of the assumption that, when emitting types, the
pointer type didn't matter.
One of the test cases added by the change doesn't optimize very well;
the output of `spirv-opt` here is invalid SPIR-V. I need to file a bug
with SPIRV-Tools about this.
I wanted to test that variable pointers to images worked too, but I
couldn't figure out how to propagate the access qualifier properly--in
MSL, it's part of the type, so getting this right is important. I've
punted on that for now.
Just like OpAccessChain we need to make use of the meta information
available to use from access_chain_internal as we can extract a packed
vector or transposed vector from a composite, not just memory load.
A block name cannot alias with any name in its own scope,
and it cannot alias with any other "global" name.
To solve this, we need to complicate the name cache updates a little bit
where we have a "primary" namespace and "secondary" namespace.
This is required to avoid relying on complex sub-expression elimination
in compilers, and generates cleaner code.
The problem case is if a complex expression is used in an access chain,
like:
Composite comp = buffer[texture(...)];
vec4 a = comp.a + comp.b + comp.c;
Before, we did not have common subexpression tracking for
OpLoad/OpAccessChain, so we easily ended up with code like:
vec4 a = buffer[texture(...)].a + buffer[texture(...)].b + buffer[texture(...)].c;
A good compiler will optimize this, but we should not rely on it, and
forcing texture(...) to a temporary also looks better.
The solution is to add a vector "implied_expression_reads", which works
similarly to expression_dependencies. We also need an extra mechanism in
to_expression which lets us skip expression read checking and do it
later. E.g. for expr -> access chain -> load, we should only trigger
a read of expr when using the loaded expression.
Avoids certain cases of variance between translation units by forcing
every dependent expression of a store to be temporary.
Should avoid the major failure cases where invariance matters.
Don't use `addsat()`/`subsat()`; that'll erroneously flag cases where
the sum is exactly the maximum integer value, or the difference is
exactly 0. Also, correct the condition for the `select()` function; it's
basically `mix()` with a boolean factor.
(What was I *thinking*?)
In GLSL, 8-bit types require GL_EXT_shader_8bit_storage. 16-bit types
can use either GL_AMD_gpu_shader_int16/GL_AMD_gpu_shader_half_float or
GL_EXT_shader_16bit_storage.
When trying to validate buffer sizes, we usually need to bail out when
using SpecConstantOps, but for some very specific cases where we allow
unsized arrays currently, we can safely allow "unknown" sized arrays as
well.
This is probably the best we can do, when we have even more difficult
cases than this, we throw a more sensible error message.
Previously, when generating non-Vulkan GLSL, each use of a spec constant
would be subsituted for its default value and the declaration of the constant
itself would be omitted completely.
This change slightly alters this behavior. The uses of the constant are kept,
as well as the declaration, although the latter is stripped of the layout
qualifier. The declaration is also prepended with the following code:
#ifndef <constant name>_value
#define <constant name> <default constant value>
#endif
and the constant itself now looks like
const <constant type> <constant name> = <constant name>_value;
The rationale for this change is that it gives the user a way to provide
custom values for specialization constants even when the target does not
support them.
- Add new Windows support
- Use CMake/CTest instead of Make + shell scripts
- Use --parallel in CTest
- Fix CTest on Windows
- Cleanups in test_shaders.py
- Force specific commit for SPIRV-Headers
- Fix Inf/NaN odd-ball case by moving to ASM
HLSL just picked the variable name which did not work as expected for
some users. Use the same logic as GLSL and set up declared_block_names,
so the actual name can be queried later.
A lot of changes in spirv-opt output.
Some new invalid SPIR-V was found but most of them were not significant
for SPIRV-Cross, so just marked them as invalid.
Even as of Metal 2.1, MSL still doesn't support arrays of buffers
directly. Therefore, we must manually expand them. In the prologue, we
define arrays holding the argument pointers; these arrays are what the
transpiled code ends up referencing. We might be able to do similar
things for textures and samplers prior to MSL 2.0.
Speaking of which, also enable texture arrays on iOS MSL 1.2.
