We require folks to include gskglrenderer.h in order
to create a GL renderer. So we be careful to only
include header in gskglrenderer.h that won't trigger
ugly warnings.
See !6363
Take a rendernode as source and a GskPath and GskStroke,
and fill the area that is covered when stroking the path
with the given stroke parameters, like cairo_stroke() would.
Add a bunch of inline functions for graphene_rectangle_t.
We use those quite extensively in tight loops so making them as fast as
possible via inlining has massive benefits.
The current render-heavy benchmark I am playing (th paris-30k in node-editor)
went from 49fps to 85fps on my AMD.
In particular, fix the combination of luminance and alpha. We want to do
mask = luminance * alpha
and for inverted
mask = (1.0 - luminance) * alpha
so add a test that makes sure we do that and then fix the code and
existing tests to conform to it.
The IFUNC resolvers that we are using here get
run early, before asan had a chance to set up its
plumbing, and therefore things go badly if they
are compiled with asan. Turning it off makes things
work again.
The gcc bug tracking this problem:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=110442
Thanks to Jakub Jelinek and Florian Weimer for
analyzing this and recommending the workaround.
g_hash_table_insert() frees the given key if it already exists
in the hashtable. But since we use the same pointer in the
following line, it will result in use-after-free.
So instead, insert the key only if it doesn't exist.
Replace gdk_memory_format_prefers_high_depth with the more generic
gdk_memory_format_get_depth() that returns the depth of the individual
channels.
Also make the GL renderer use that to pick the generic F16 format
instead of immediately going for F32 when uploading textures.
This is not the optimal way of doing it: we're
reuploading the texture with client-side conversion.
But it fits nicely into our current handling of mipmaps.
We can do better once we use shaders for colorspace
conversions.
Make the callers of this function check for
straight alpha themselves, and only do the
version compatibility check here. This makes
the function usable in contexts where straight
alpha is acceptable.
When the command queue is out of batches, there is
no point in doing further work like allocating uniforms.
This helps us avoid assertions in the uniform code
that we would hit when we run out of uniform space
too.
When we start ignoring batches, we must do it everywhere,
or we may run into assertions. This was triggered by an
enormous text node tree produced by tests/rendernode-create.
This was the intention, but the object data by itself
does not achieve that: We do run dispose on the display
when it is closed, but object data is only cleared in
finalize. So listen to the ::closed signal and remove
the driver ourselves.
Fix up the drivers dispose implementation enough for
that to actually work.
When slicing the texture, the GL renderer was
forgetting to apply the viewport origin. This
shows up when rendering things with negative
scales, leading to negative origins.
Our coverage computation only works for well-behaved
rects and rounded rects. But our modelview transform
might flip x or y around, causing things to fail.
Add functions to normalize rects and rounded rects,
and use it whenever we transform a rounded rect in GLSL.
Pass the GLsync object from texture into our
command queue, and when executing the queue,
wait on the sync object the first time we
use its associated texture.
When adding mask nodes, I overlooked that
we have two separate functions for determining
what transforms a node supports without offlines.
Since we claim that mask nodes support general
transform, they must certainly support 2d transforms
as well.
They're not needed and GLES doesn't technically support them, even
though GTK had been using them via epoxy sneakily using the
GL_OES_vertex_array_object extension behind our back.
Fractional scaling with the GL renderer is
experimental for now, so we disable it unless
GDK_DEBUG=gl-fractional is set.
This will give us time to work out the kinks.
This commit combines changes in the Wayland backend,
the GL context frontend, and the GL renderer to switch
them all to use the fractional scale.
In the Wayland backend, we now use the fractional scale
to size the EGL window.
In the GL frontend code, we use the fractional scale to
scale the damage region and surface in begin/end_frame.
And in the GL renderer, we replace gdk_surface_get_scale_factor()
with gdk_surface_get_scale().
When the GL texture already has a mipmap, we don't
have to download and reupload it to generate one.
We differentiate the handling for texture scale nodes,
where we do want to force the mipmap creation even if
it requires us to reupload the GL texture, and plain
texture nodes, where we just take advantage of a
preexisting mipmap to allow trilinear filtering for
downscaling, or create one if we have to upload the
texture anyway.
Store texture coordinates for each slice
instead of assuming 0,0,1,1, and generate
overlapping slices to allow for proper mipmaps.
This almost fixes trilinear filtering with
sliced textures.
We cheat and just set the texture parameters instead and hope nothing
explodes.
So far it didn't.
This is only needed to support GLES 2.0 so it's quite a limited set of
hardware these days.
Instead of uploading a texture once per filter, ensure textures are
uploaded as little as possible and use samplers instead to switch
different filters.
Sometimes we have to reupload a texture unfortunately, when it is an
external one and we want to create mipmaps.
When filtering changes for an already-cached
texture, we need to clear the render data
before setting the new one, otherwise it
does not take and we end up reuploading
the texture every frame.
Allow to set max texture size using the
GSK_MAX_TEXTURE_SIZE environment variable.
We only allow to lower the max (for obvious
reasons), and we don't allow values smaller
than 512 (since our atlases use that size).
Use the same approach and only create an offscreen
that is big enough for the clipped part of the scaled
texture.
If the clipped part is still too large for a single
texture, we give up and just render the texture without
filters (using the regular texture rendering code path
which supports slicing).
The following commit will add the texture-scale-magnify-10000x
test which fails without this fix.
The API docs outline why quite well.
This should make it possible to do saving of textures to image files
without any private API with the same featureset that GTK uses.
Also remove the gsktextureprivate.h include where
gdk_texture_get_format() was the only reason for it.
When we truncate the command queue because it
is too big, we were messing up our state accounting
and running into criticals as a consequence.
This can be reproduced by opening a well-populated
fishbowl demo in the inspectors recorder.
Fixes: #5188
Add GskMaskNode, and support it in the render node
parser, in the inspector and in GtkSnapshot.
The rendering is just fallback for now.
Based on old work by Timm Bäder.
Instead of asserting only in debug builds (which are generally not
shipped in distributions) we should deliver a critical log-level message
so that these can be found sooner when not developing with jhbuild,
Flatpak, etc.
Also assert that we've setup the state correctly when realizing the
GskGLRenderer object.
Fixes#4625
Those property features don't seem to be in use anywhere.
They are redundant since the docs cover the same information
and more. They also created unnecessary translation work.
Closes#4904
We now collect this information during node
construction, so use it here.
The concrete change here is that we now avoid
offscreens for container nodes with multiple children,
as long as they don't overlap. In particular, this
avoid offscreens for ellipsized dim labels.
This fixes two issues with the offscreen rendering code for nodes with
bounds not aligned with the pixel grid:
1.) When drawing to an offscreen buffer the size of the offscreen buffer
was rounded up, but then later when used as texture the vertices
correspond to the original bounds with the unrounded size. This could
then result in the offscreen texture being drawn onscreen at a slightly
smaller size, which then lead to it being visually shifted and blurry.
This is fixed by adjusting the u/v coordinates to ignore the padding
region in the offscreen texture that got added by the size increase from
rounding.
2.) The viewport used when rendering to the offscreen buffer was not
aligned with the pixel grid for nodes at coordinates not aligned with
the pixel grid. Then because the content of the offscreen buffer is not
aligned with the pixel grid and later when used as textures sampling
from it will result in interpolated values for an onscreen pixel. This
could also result in shifting and blurriness, especially for nested
offscreen rendering at different offsets.
This is fixed by adding similar padding at the beginning of the
texture and also adjusting the u/v coordinates to ignore this region.
Fixes: https://gitlab.gnome.org/GNOME/gtk/-/issues/3833
This moves a lot of the texture atlas control out of the driver and into
the various texture libraries through their base GskGLTextureLibrary class.
Additionally, this gives more control to libraries on allocating which can
be necessary for some tooling such as future Glyphy integration.
As part of this, the 1x1 pixel initialization is moved to the Glyph library
which is the only place where it is actually needed.
The compact vfunc now is responsible for compaction and it allows for us
to iterate the atlas hashtable a single time instead of twice as we were
doing previously.
The init_atlas vfunc is used to do per-library initialization such as
adding a 1x1 pixel in the Glyph cache used for coloring lines.
The allocate vfunc purely allocates but does no upload. This can be useful
for situations where a library wants to reuse the allocator from the
base class but does not want to actually insert a key/value entry. The
glyph library uses this for it's 1x1 pixel.
In the future, we will also likely want to decouple the rectangle packing
implementation from the atlas structure, or at least move it into a union
so that we do not allocate unused memory for alternate allocators.
This removes the sharing of atlases across various texture libraries. Doing
so is necessary so that atlases can have different semantics for how they
allocate within the texture as well as potentially allowing for different
formats of texture data.
For example, in the future we might store non-pixel data in the textures
such as Glyphy or even keep glyphs with color content separate from glyphs
which do not and can use alpha channel only.
This allows the gskglprograms.defs a bit more control over how a shader
will get generated and if it needs to combine sources. Currently, none of
the built-in shaders do that, but upcoming shaders which come from external
libraries will need the ability to inject additional sources in-between
layers.
If the max_entry_size is zero, then assume we can add anything to the
atlas. This allows for situations where we might be uploading an arc list
to the atlas instead of pixel data for GPU font rendering.
When large viewports are passed to gsk_renderer_render_texture(), don't
fail (or even return NULL).
Instead, draw multiple tiles and assemble them into a memory texture.
Tests added to the testsuite for this.
There are situations where our "default framebuffer" is not actually
zero, yet we still want to apply a scissor rect.
Generally, 0 is the default framebuffer. But on platforms where we need
to bind a platform-specific feature to a GL_FRAMEBUFFER, we might have a
default that is not 0. For example, on macOS we bind an IOSurfaceRef to
a GL_TEXTURE_RECTANGLE which then is assigned as the backing store for a
framebuffer. This is different than using gsk_gl_renderer_render_texture()
in that we don't want to incur an extra copy to the destination surface
nor do we even have a way to pass a texture_id into render_texture().
If the rendering operation is over an opaque region, we can potentially
avoid clearing a large section of the framebuffer destination. Some cases
you do want to clear, such as when clearing the whole contents as some
drivers have fast paths for that to avoid bringing data back into the
framebuffer.
Instead of just passing major/minor, pass them twice, once for GL and
once for GLES. This way, we don't need to check for GL and GLES
separately.
If something is supported unconditionally, passing 0/0 works fine.
That said, I'd like to group the arguments somehow, because otherwise
it's just a confusing list of numbers - but I have no idea how to do
that.
For libANGLE to work with our shaders, we must use "300 es" for
the #version directive in our shaders, as well as using the non-legacy/
non-GLES codepath in the shaders. In order to check whether we are
using the GLSL 300 es shaders, we check whether we are using a GLES 3.0+
context. As a result, make ->glsl_version a const char* and make sure
the existing shader version macros are defined apprpriately, and add a
new macro for the "300 es" shader version string.
This will allow the gtk4 programs to run under Windows using EGL via
libANGLE. Some of the GL demos won't work for now, but at least this
makes things a lot better for using GL-accelerated graphics under Windows
for those that want to or need to use libANGLE (such as those with
graphics drivers that aren't capable of our Desktop (W)GL requirements in
GTK.
On Windows with nVidia drivers at least, when we create a legacy context
via wglCreateContext(), we may still get a (W)GL 4.x context. Allow
such contexts to also use GLSL version 130 instead of 110, so that
things do continue to work.
