DX may emit ArrayStride and MatrixStride of 16, but the size of the
object does not align with that and expect to pack other members inside
its last member.
The workaround is to emit array size/col/row one less than we expect and
rely on padding to carve out a "dead zone" for the last member.
DXVK emits SPIR-V where fragment shader builtins have names derived from
DXBC assembly, e.g. `oDepth` for `FragDepth`. When we declared the
disabled output, we used this name, but when referencing it, we
continued to use the GLSL name. This breaks compilation.
Like with `point_size` when not rendering points, Metal complains when
writing to a variable using the `[[depth]]` qualifier when no depth
buffer be attached. In that case, we must avoid emitting `FragDepth`,
just like with `PointSize`.
I assume it will also complain if there be no stencil attachment and the
shader write to `[[stencil]]`, or it write to `[[color(n)]]` but there
be no color attachment at n.
Limit inline blocks to one per descriptor set.
This should avoid the need for complicated code to calculate the
argument buffer ID stride of an inline uniform block. If there's demand
for more inline blocks, we can revisit this.
Here, the inline uniform block is explicit: we instantiate the buffer
block itself in the argument buffer, instead of a pointer to the buffer.
I just hope this will work with the `MTLArgumentDescriptor` API...
Note that Metal recursively assigns individual members of embedded
structs IDs. This means for automatic assignment that we have to
calculate the binding stride for a given buffer block. For MoltenVK,
we'll simply increment the ID by the size of the inline uniform block.
Then the later IDs will never conflict with the inline uniform block. We
can get away with this because Metal doesn't require that IDs be
contiguous, only monotonically increasing.
This is implied in both GL and GLES. Emitting memoryBarrierShared() was
based on earlier confusion in the spec which has since been fixed and
clarified.
MSL does not support this, so we have to emulate it by passing it around
as a varying between stages. We use a special "user(clipN)" attribute
for this rather than locN which is used for user varyings.
This CL updates the test runner to only run spirv-opt if the generated
SPIR-V is valid. If validation is skipped it's possible to hit aborts
and other memory errors in the optimizer as it assumes the SPIR-V is
valid.
There was a hack to workaround a bug in DXC where control point -> patch
constant phase was passed in Function storage, but we have to use
Workgroup here. We will not support these kinds of hacks for invalid
SPIR-V, so hack the reference files to use the "proper" fix and remove
the hack for time being.
Need to make output 100% exact for MSVC and GCC libc testing, but they are 1 ULP
off when converting fp32 to string in some weird corner cases.
Roundtrip should be correct though, but that outside the scope of
SPIRV-Cross.
We had output dependent on complex_continue being set, but setting that
flag was dependent on unordered_set declaration order. Make it invariant
to ordering and change the implementation so it knows about the new
temporary hoisting for access chains.
To support loading array of array properly in tessellation, we need a
rewrite of how tessellation access chains are handled.
The major change is to remove the implicit unflatten step inside
access_chain which does not take into account the case where you load
directly from a control point array variable.
We defer unflatten step until OpLoad time instead.
This fixes cases where we load array of {array,matrix,struct}.
Removes the hacky path for MSL access chain index workaround.
Non-patch arrays of IO variables in tesc/tese have their array index
stripped, and access chains are specially handled, we shouldn't attempt
to create "normal" arrays of these.
This avoids a lot of huge code changes.
Arrays generally cannot be copied in and out of buffers, at least no
compiler frontend seems to do it.
Also avoids a lot of issues surrounding packed vectors and matrices.
If there are enough members in an IAB, we cannot use the constant
address space as MSL compiler complains about there being too many
members. Support emitting the device address space instead.
It is possible for a shader to declare two plain struct types which
simply share the same OpName without there being an implicit
value/buffer alias relationship.
For to_member_name(), make sure to use the type alias master when
resolving member names. The member name may be different in a type alias
master if the SPIR-V is being intentionally difficult.
Rolled the hashes used for glslang, SPIRV-Tools, and SPIRV-Headers to
HEAD, which includes the update to 1.5.
Added passing '--amb' to glslang, so I didn't have to explicitly set
bindings in a large number of test shaders that currently don't, and
now glslang considers them invalid.
Marked all shaders that no longer pass spirv-val as .invalid.
Vulkan has two types of buffer descriptors,
`VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC` and
`VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC`, which allow the client to
offset the buffers by an amount given when the descriptor set is bound
to a pipeline. Metal provides no direct support for this when the buffer
in question is in an argument buffer, so once again we're on our own.
These offsets cannot be stored or associated in any way with the
argument buffer itself, because they are set at bind time. Different
pipelines may have different offsets set. Therefore, we must use a
separate buffer, not in any argument buffer, to hold these offsets. Then
the shader must manually offset the buffer pointer.
This change fully supports arrays, including arrays of arrays, even
though Vulkan forbids them. It does not, however, support runtime
arrays. Perhaps later.
Writable textures cannot use argument buffers on iOS. They must be
passed as arguments directly to the shader function. Since we won't know
if a given storage image will have the `NonWritable` decoration at the
time we encode the argument buffer, we must therefore pass all storage
images as discrete arguments. Previously, we were throwing an error if
we encountered an argument buffer with a writable texture in it on iOS.
This was straightforward to implement in GLSL. The
`ShadingRateInterlockOrderedEXT` and `ShadingRateInterlockUnorderedEXT`
modes aren't implemented yet, because we don't support
`SPV_NV_shading_rate` or `SPV_EXT_fragment_invocation_density` yet.
HLSL and MSL were more interesting. They don't support this directly,
but they do support marking resources as "rasterizer ordered," which
does roughly the same thing. So this implementation scans all accesses
inside the critical section and marks all storage resources found
therein as rasterizer ordered. They also don't support the fine-grained
controls on pixel- vs. sample-level interlock and disabling ordering
guarantees that GLSL and SPIR-V do, but that's OK. "Unordered" here
merely means the order is undefined; that it just so happens to be the
same as rasterizer order is immaterial. As for pixel- vs. sample-level
interlock, Vulkan explicitly states:
> With sample shading enabled, [the `PixelInterlockOrderedEXT` and
> `PixelInterlockUnorderedEXT`] execution modes are treated like
> `SampleInterlockOrderedEXT` or `SampleInterlockUnorderedEXT`
> respectively.
and:
> If [the `SampleInterlockOrderedEXT` or `SampleInterlockUnorderedEXT`]
> execution modes are used in single-sample mode they are treated like
> `PixelInterlockOrderedEXT` or `PixelInterlockUnorderedEXT`
> respectively.
So this will DTRT for MoltenVK and gfx-rs, at least.
MSL additionally supports multiple raster order groups; resources that
are not accessed together can be placed in different ROGs to allow them
to be synchronized separately. A more sophisticated analysis might be
able to place resources optimally, but that's outside the scope of this
change. For now, we assign all resources to group 0, which should do for
our purposes.
`glslang` doesn't support the `RasterizerOrdered` UAVs this
implementation produces for HLSL, so the test case needs `fxc.exe`.
It also insists on GLSL 4.50 for `GL_ARB_fragment_shader_interlock`,
even though the spec says it needs either 4.20 or
`GL_ARB_shader_image_load_store`; and it doesn't support the
`GL_NV_fragment_shader_interlock` extension at all. So I haven't been
able to test those code paths.
Fixes#1002.
This change introduces functions and in one case, a class, to support
the `VK_KHR_sampler_ycbcr_conversion` extension. Except in the case of
GBGR8 and BGRG8 formats, for which Metal natively supports implicit
chroma reconstruction, we're on our own here. We have to do everything
ourselves. Much of the complexity comes from the need to support
multiple planes, which must now be passed to functions that use the
corresponding combined image-samplers. The rest is from the actual
Y'CbCr conversion itself, which requires additional post-processing of
the sample retrieved from the image.
Passing sampled images to a function was a particular problem. To
support this, I've added a new class which is emitted to MSL shaders
that pass sampled images with Y'CbCr conversions attached around. It
can handle sampled images with or without Y'CbCr conversion. This is an
awful abomination that should not exist, but I'm worried that there's
some shader out there which does this. This support requires Metal 2.0
to work properly, because it uses default-constructed texture objects,
which were only added in MSL 2. I'm not even going to get into arrays of
combined image-samplers--that's a whole other can of worms. They are
deliberately unsupported in this change.
I've taken the liberty of refactoring the support for texture swizzling
while I'm at it. It's now treated as a post-processing step similar to
Y'CbCr conversion. I'd like to think this is cleaner than having
everything in `to_function_name()`/`to_function_args()`. It still looks
really hairy, though. I did, however, get rid of the explicit type
arguments to `spvGatherSwizzle()`/`spvGatherCompareSwizzle()`.
Update the C API. In addition to supporting this new functionality, add
some compiler options that I added in previous changes, but for which I
neglected to update the C API.
ESSL does not support `GL_ARB_post_depth_coverage`. There, we must use
`GL_EXT_post_depth_coverage`. I've added this as a fallback for desktop
as well.
Note that `GL_EXT_post_depth_coverage` also requires the fragment shader
to set `early_fragment_tests` explicitly, while
`GL_ARB_post_depth_coverage` does not. It doesn't really matter either
way, since `SPV_KHR_post_depth_coverage` *also* requires both execution
modes to be explicitly set.
This command allows the caller to set the base value of
`BuiltInWorkgroupId`, and thus of `BuiltInGlobalInvocationId`. Metal
provides no direct support for this... but it does provide a builtin,
`[[grid_origin]]`, normally used to pass the base values for the stage
input region, which we will now abuse to pass the dispatch base and
avoid burning a buffer binding.
`[[grid_origin]]`, as part of Metal's support for compute stage input,
requires MSL 1.2. For 1.0 and 1.1, we're forced to provide a buffer.
(Curiously, this builtin was undocumented until the MSL 2.2 release. Go
figure.)
This is not necessary, as we must emit an invalidating store before we
potentially consume an invalid expression. In fact, we're a bit
conservative here in this case for example:
int tmp = variable;
if (...)
{
variable = 10;
}
else
{
// Consuming tmp here is fine, but it was
// invalidated while emitting other branch.
// Technically, we need to study if there is an invalidating store
// in the CFG between the loading block and this block, and the other
// branch will not be a part of that analysis.
int tmp2 = tmp * tmp;
}
Fixing this case means complex CFG traversal *everywhere*, and it feels like overkill.
Fixing this exposed a bug with access chains, so fix a bug where expression dependencies were not
inherited properly in access chains. Access chains are now considered forwarded if there
is at least one dependency which is also forwarded.
This subtle bug removed any expression validation for trivially swizzled
variables. Make usage suppression a more explicit concept rather than
just hacking off forwarded_temporaries.
There is some fallout here with loop generation since our expression
invalidation is currently a bit too naive to handle loops properly.
The forwarding bug masked this problem until now.
If part of the loop condition is also used in the body, we end up
reading an invalid expression, which in turn forces a temporary to be
generated in the condition block, not good. We'll need to be smarter
here ...
If this is computed *before* a `demote`, but used *after*, forwarding it
will produce the wrong value. This does make for uglier shaders, but
it's necessary right now to ensure correctness.
I needed to use an assembly shader to produce the test for this.
`spirv-opt` is not smart enough (or too smart?) to eliminate the
variable that would be used in GLSL to express this.
This extension provides a new operation which causes a fragment to be
discarded without terminating the fragment shader invocation. The
invocation for the discarded fragment becomes a helper invocation, so
that derivatives will remain defined. The old `HelperInvocation` builtin
becomes undefined when this occurs, so a second new instruction queries
the current helper invocation status.
This is only fully supported for GLSL. HLSL doesn't support the
`IsHelperInvocation` operation and MSL doesn't support the
`DemoteToHelperInvocation` op.
Fixes#1052.
This provides a few functions normally available in OpenCL to the SPIR-V
shader environment. These functions happen to be available in Metal as
well.
No GLSL, unfortunately. Intel has yet to publish a
`GL_INTEL_shader_integer_functions2` spec.
Fix fallout from changes.
There's a bug in glslang that prevents `float16_t`, `[u]int16_t`, and
`[u]int8_t` constants from adding the corresponding SPIR-V capabilities.
SPIRV-Tools, meanwhile, tightened validation so that these constants are
only valid if the corresponding `Float16`, `Int16`, and `Int8` caps are
on. This affects the `16bit-constants.frag` test for GLSL and MSL.
The only piece added by this extension is the `DeviceIndex` builtin,
which tells the shader which device in a grouped logical device it is
running on.
Metal's pipeline state objects are owned by the `MTLDevice` that created
them. Since Metal doesn't support logical grouping of devices the way
Vulkan does, we'll thus have to create a pipeline state for each device
in a grouped logical device. The upcoming peer group support in Metal 3
will not change this. For this reason, for Metal, the device index is
supplied as a constant at pipeline compile time.
There's an interaction between `VK_KHR_device_group` and
`VK_KHR_multiview` in the
`VK_PIPELINE_CREATE_VIEW_INDEX_FROM_DEVICE_INDEX_BIT`, which defines the
view index to be the same as the device index. The new
`view_index_from_device_index` MSL option supports this functionality.
Using the `PostDepthCoverage` mode specifies that the `gl_SampleMaskIn`
variable is to contain the computed coverage mask following the early
fragment tests, which this mode requires and implicitly enables.
Note that unlike Vulkan and OpenGL, Metal places this on the sample mask
input itself, and furthermore does *not* implicitly enable early
fragment testing. If it isn't enabled explicitly with an
`[[early_fragment_tests]]` attribute, the compiler will error out. So we
have to enable that mode explicitly if `PostDepthCoverage` is enabled
but `EarlyFragmentTests` isn't.
For Metal, only iOS supports this; for some reason, Apple has yet to
implement it on macOS, even though many desktop cards support it.
This maps them to their MSL equivalents. I've mapped `Coherent` to
`volatile` since MSL doesn't have anything weaker than `volatile` but
stronger than nothing.
As part of this, I had to remove the implicit `volatile` added for
atomic operation casts. If the buffer is already `coherent` or
`volatile`, then we would add a second `volatile`, which would be
redundant. I think this is OK even when the buffer *doesn't* have
`coherent`: `T *` is implicitly convertible to `volatile T *`, but not
vice-versa. It seems to compile OK at any rate. (Note that the
non-`volatile` overloads of the atomic functions documented in the spec
aren't present in the MSL 2.2 stdlib headers.)
`restrict` is tricky, because in MSL, as in C++, it needs to go *after*
the asterisk or ampersand for the pointer type it's modifying.
Another issue is that, in the `Simple`, `GLSL450`, and `Vulkan` memory
models, `Restrict` is the default (i.e. does not need to be specified);
but MSL likely follows the `OpenCL` model where `Aliased` is the
default. We probably need to implicitly set either `Restrict` or
`Aliased` depending on the module's declared memory model.
The old method of using a different unpacked matrix type doesn't work
for scalar alignment. It certainly wouldn't have any effect for a square
matrix, since the number of columns and rows are the same. So now we'll
store them as arrays of packed vectors.
Relaxed block layout relaxed the restrictions on vector alignment,
allowing them to be aligned on scalar boundaries. Scalar block layout
relaxes this further, allowing *any* member to be aligned on a scalar
boundary. The requirement that a vector not improperly straddle a
16-byte boundary is also relaxed.
I've also added a test showing that `std430` layout works with UBOs.
I'm troubled by the dual meaning of the `Packed` extended decoration. In
some instances (struct, `float[]`, and `vec2[]` members), it actually
means the exact opposite, that the member needs extra padding. This is
especially problematic for `vec2[]`, because now we need to distinguish
the two cases by checking the array stride. I wonder if this should
actually be split into two decorations.
There is a case where we can deduce a for/while loop, but the continue
block is actually very painful to deal with, so handle that case as
well. Removes an exceptional case.
MSL prior to 2.2 doesn't support these natively in any stage but
compute. But, we can (assuming no threads were terminated prematurely)
get their values with some creative uses of the
`simd_prefix_exclusive_sum()` and `simd_sum()` functions.
Also, fix a missing `to_expression()` with `BuiltInSubgroupEqMask`.
For KhronosGroup/MoltenVK#629.
This is needed to support `VK_KHR_multiview`, which is in turn needed
for Vulkan 1.1 support. Unfortunately, Metal provides no native support
for this, and Apple is once again less than forthcoming, so we have to
implement it all ourselves.
Tessellation and geometry shaders are deliberately unsupported for now.
The problem is that the current implementation encodes the `ViewIndex`
as part of the `InstanceIndex`, which in the SPIR-V environment at least
only exists in the vertex shader. So we need to work out a way to pass
the view index along to the later stages.
This implementation runs vertex shaders for all views up to the highest
bit set in the view mask, even those whose bits are clear. The fragments
for the inactive views are then discarded. Avoiding this is difficult:
calculating the view indices becomes far more complicated if we can only
run for those views which are set in the mask.
We used to use the Binding decoration for this, but this method is
hopelessly broken. If no explicit MSL resource remapping exists, we
remap automatically in a manner which should always "just work".
If we compile multiple times due to forced_recompile, we had
deferred_declaration = true while emitting function prototypes which
broke an assumption. Fix this by clearing out stale state before leaving
a function.
