Commit Graph

266 Commits

Author SHA1 Message Date
Hans-Kristian Arntzen
461f1506e7 Do not eagerly invalidate all active variables on a branch.
This is not necessary, as we must emit an invalidating store before we
potentially consume an invalid expression. In fact, we're a bit
conservative here in this case for example:

int tmp = variable;
if (...)
{
    variable = 10;
}
else
{
    // Consuming tmp here is fine, but it was
    // invalidated while emitting other branch.
    // Technically, we need to study if there is an invalidating store
    // in the CFG between the loading block and this block, and the other
    // branch will not be a part of that analysis.
    int tmp2 = tmp * tmp;
}

Fixing this case means complex CFG traversal *everywhere*, and it feels like overkill.

Fixing this exposed a bug with access chains, so fix a bug where expression dependencies were not
inherited properly in access chains. Access chains are now considered forwarded if there
is at least one dependency which is also forwarded.
2019-07-24 11:17:30 +02:00
Hans-Kristian Arntzen
18bcc9b790 Do not disable temporary forwarding when we suppress usage tracking.
This subtle bug removed any expression validation for trivially swizzled
variables. Make usage suppression a more explicit concept rather than
just hacking off forwarded_temporaries.

There is some fallout here with loop generation since our expression
invalidation is currently a bit too naive to handle loops properly.
The forwarding bug masked this problem until now.

If part of the loop condition is also used in the body, we end up
reading an invalid expression, which in turn forces a temporary to be
generated in the condition block, not good. We'll need to be smarter
here ...
2019-07-23 19:18:44 +02:00
Chip Davis
12a8654784 Don't forward uses of an OpIsHelperInvocationEXT op.
If this is computed *before* a `demote`, but used *after*, forwarding it
will produce the wrong value. This does make for uglier shaders, but
it's necessary right now to ensure correctness.

I needed to use an assembly shader to produce the test for this.
`spirv-opt` is not smart enough (or too smart?) to eliminate the
variable that would be used in GLSL to express this.
2019-07-18 17:32:35 -05:00
Chip Davis
50dce10c5d Support the SPV_EXT_demote_to_helper_invocation extension.
This extension provides a new operation which causes a fragment to be
discarded without terminating the fragment shader invocation. The
invocation for the discarded fragment becomes a helper invocation, so
that derivatives will remain defined. The old `HelperInvocation` builtin
becomes undefined when this occurs, so a second new instruction queries
the current helper invocation status.

This is only fully supported for GLSL. HLSL doesn't support the
`IsHelperInvocation` operation and MSL doesn't support the
`DemoteToHelperInvocation` op.

Fixes #1052.
2019-07-17 09:12:22 -05:00
Hans-Kristian Arntzen
4d7aae1050 Merge branch 'device-group' of git://github.com/cdavis5e/SPIRV-Cross 2019-07-15 09:46:16 +02:00
Chip Davis
343c6f4ff4 Update external repos.
Fix fallout from changes.

There's a bug in glslang that prevents `float16_t`, `[u]int16_t`, and
`[u]int8_t` constants from adding the corresponding SPIR-V capabilities.
SPIRV-Tools, meanwhile, tightened validation so that these constants are
only valid if the corresponding `Float16`, `Int16`, and `Int8` caps are
on. This affects the `16bit-constants.frag` test for GLSL and MSL.
2019-07-13 16:50:21 -05:00
Chip Davis
6a58554568 Support the SPV_KHR_device_group extension.
The only piece added by this extension is the `DeviceIndex` builtin,
which tells the shader which device in a grouped logical device it is
running on.

Metal's pipeline state objects are owned by the `MTLDevice` that created
them. Since Metal doesn't support logical grouping of devices the way
Vulkan does, we'll thus have to create a pipeline state for each device
in a grouped logical device. The upcoming peer group support in Metal 3
will not change this. For this reason, for Metal, the device index is
supplied as a constant at pipeline compile time.

There's an interaction between `VK_KHR_device_group` and
`VK_KHR_multiview` in the
`VK_PIPELINE_CREATE_VIEW_INDEX_FROM_DEVICE_INDEX_BIT`, which defines the
view index to be the same as the device index. The new
`view_index_from_device_index` MSL option supports this functionality.
2019-07-13 16:45:54 -05:00
Chip Davis
1df47db6ba Support the SPV_KHR_post_depth_coverage extension.
Using the `PostDepthCoverage` mode specifies that the `gl_SampleMaskIn`
variable is to contain the computed coverage mask following the early
fragment tests, which this mode requires and implicitly enables.

Note that unlike Vulkan and OpenGL, Metal places this on the sample mask
input itself, and furthermore does *not* implicitly enable early
fragment testing. If it isn't enabled explicitly with an
`[[early_fragment_tests]]` attribute, the compiler will error out. So we
have to enable that mode explicitly if `PostDepthCoverage` is enabled
but `EarlyFragmentTests` isn't.

For Metal, only iOS supports this; for some reason, Apple has yet to
implement it on macOS, even though many desktop cards support it.
2019-07-11 10:28:43 -05:00
Hans-Kristian Arntzen
50342966c0 Fall back to complex loop if non-trivial continue block is found.
There is a case where we can deduce a for/while loop, but the continue
block is actually very painful to deal with, so handle that case as
well. Removes an exceptional case.
2019-07-08 11:54:29 +02:00
Hans-Kristian Arntzen
13378ad1ac Add simple test for extended debug operations. 2019-07-05 10:44:30 +02:00
Hans-Kristian Arntzen
041f103d44 MSL/HLSL: Support scalar reflect and refract. 2019-07-03 12:31:52 +02:00
Hans-Kristian Arntzen
fc9fe4e480 Fix variable scope when an if or else block dominates a variable.
Just like loops, we need complicated hoisting again to make this work.
2019-07-03 11:18:50 +02:00
Hans-Kristian Arntzen
f8b084de61 MSL/HLSL: Support OpOuterProduct. 2019-07-01 10:57:27 +02:00
Hans-Kristian Arntzen
ff87419607 Deal with scalar input values for distance/length/normalize.
HLSL and MSL don't support it, so fall back to simpler intrinsics.
2019-06-28 11:20:14 +02:00
Hans-Kristian Arntzen
c76b99b711 Handle more cases with FP16 and texture sampling. 2019-06-27 15:04:22 +02:00
Hans-Kristian Arntzen
bcef66fbf3 Fix declaration of loop variables with a Phi helper copy.
Certain Phi variables need to maintain a temporary copy, but we forgot
to declare them when the master variable is a loop variable itself.
2019-06-25 10:45:15 +02:00
Hans-Kristian Arntzen
bc3bf47446 Rewrite how switch block case labels are emitted. 2019-06-20 11:57:05 +02:00
Hans-Kristian Arntzen
707312b83a GLSL: Support NV barycentrics. 2019-06-19 09:52:35 +02:00
Hans-Kristian Arntzen
a9da59b0b8 GLSL: Support GL_ARB_shader_stencil_export. 2019-06-12 10:06:54 +02:00
Hans-Kristian Arntzen
03d93abc1a Deal with case where a variable is dominated by inner part of a loop.
There is a risk that we try to preserve a loop variable through multiple
iterations, even though the dominating block is inside a loop.

Fix this by analyzing if a block starts off by writing to a variable. In
that case, there cannot be any preservation going on. If we don't, pretend the
loop header is reading the variable, which moves the variable to an
appropriate scope.
2019-06-06 11:11:44 +02:00
Hans-Kristian Arntzen
65af09d2d1 Support emitting OpLine directive.
Facilitates easier mapping from source language to cross-compiled output
in tooling.
2019-05-28 13:44:24 +02:00
Hans-Kristian Arntzen
23889f7b87 GLSL: Support std430 in UBOs with scalar layout. 2019-05-28 12:22:44 +02:00
Hans-Kristian Arntzen
6fcf8c83d9 GLSL: Support OpBitcast for buffer references.
Update glslang/SPIRV-Tools/SPIRV-Headers references.
2019-05-09 10:29:31 +02:00
Hans-Kristian Arntzen
b6f8a20624 GLSL: Return correct sign for OpArrayLength.
.length() returns int, not uint ...
2019-05-07 19:02:32 +02:00
Hans-Kristian Arntzen
e9da5ed631 HLSL: Support OpArrayLength. 2019-05-07 15:53:41 +02:00
Hans-Kristian Arntzen
3186701739 GLSL: Support GL_EXT_nonuniform_qualifier. 2019-05-02 11:15:51 +02:00
Hans-Kristian Arntzen
6f091e7c8f GLSL: Support GL_EXT_scalar_block_layout. 2019-04-26 15:43:37 +02:00
Hans-Kristian Arntzen
2cc374a0c8 GLSL: Implement GL_EXT_buffer_reference.
Buffer objects can contain arbitrary pointers to blocks.
We can also implement ConvertPtrToU and ConvertUToPtr.
The latter can cast a uint64_t to any type as it pleases,
so we will need to generate fake buffer reference blocks to be able to
cast the type.
2019-04-26 11:43:51 +02:00
Hans-Kristian Arntzen
3ca8bc5e0d Support fma() in older GLSL targets. 2019-04-08 10:38:32 +02:00
Hans-Kristian Arntzen
317144a59c Detect invalid DoWhileLoop early.
We had a bug where error conditions in DoWhileLoop emit path would not
detect that statements were being emitted due to the masking behavior
which happens when force_recompile is true. Fix this.

Also, refactor force_recompile into member functions so we can properly
break on any situation where this is set, without having to rely on
watchpoints in debuggers.
2019-04-05 12:19:32 +02:00
Hans-Kristian Arntzen
689a7deb3e Make ray-tracing files .nocompat. 2019-03-27 10:04:42 +01:00
Patrick Mours
0f72199b8f Add generated reference shaders again 2019-03-26 15:21:12 +01:00
Hans-Kristian Arntzen
2a0365c813 GLSL/HLSL: Implement NMin/NMax/NClamp.
Need to emulate these calls for correctness.
2019-03-21 15:26:46 +01:00
Hans-Kristian Arntzen
0b20180537 GLSL: Deal with array loads from input in tessellation.
We have an edge case where the array is declared with a concrete size,
but in GLSL we must emit an unsized array, which breaks array copies.
Deal explicitly with this.
2019-03-21 11:50:53 +01:00
Hans-Kristian Arntzen
d2961b30db GLSL: Unroll loads from builtin pos/point arrays.
Odd-ball case for certain geometry shaders coming from HLSL.
2019-03-21 11:25:41 +01:00
Hans-Kristian Arntzen
0474848d4a GLSL: Support emitting push constant block as a plain UBO. 2019-03-19 10:58:52 +01:00
Hans-Kristian Arntzen
a4ac27546a MSL: Fix textures which are sampled and compared against.
depth2d in MSL only returns float, not float4, even for normal sampling.
We need to conditionally remap-swizzle back to float4.
2019-02-22 12:27:40 +01:00
Hans-Kristian Arntzen
58f264c99d
Merge pull request #865 from KhronosGroup/fix-863
Always value-cast FP16 constants instead of using literals.
2019-02-20 14:58:44 +01:00
Hans-Kristian Arntzen
4ef51331b2 Always value-cast FP16 constants instead of using literals.
GL_NV_gpu_shader5 doesn't support "hf", so to avoid lots of complicated
workarounds, just value-cast the half literals.
2019-02-20 12:30:01 +01:00
Hans-Kristian Arntzen
056a0ba27e Fix case where a struct is loaded which contains a row-major matrix. 2019-02-20 12:19:00 +01:00
Hans-Kristian Arntzen
d7090b8322 GLSL: Fix block name shenanigans in edge cases.
When we force recompile, the old var.self name we used as a fallback
name might have been disturbed, so we should recover certain names back
to their original form in case we are forced to take a recompile to make
the naming algorithm more deterministic.
2019-02-13 16:39:59 +01:00
Hans-Kristian Arntzen
3e584f2c3f Support LUTs in single-function CFGs on Private storage class.
Fairly common pattern in unoptimized SPIR-V. Support this case as well.
2019-02-06 10:38:59 +01:00
Hans-Kristian Arntzen
2ed171e525 GLSL/MSL: Implement 8-bit part of VK_KHR_shader_float16_int8.
Storage was in place already, so mostly just dealing with bitcasts and
constants.

Simplies some of the bitcasting logic, and this exposed some bugs in the
implementation. Refactor to use correct width integers with explicit bitcast opcodes.
2019-01-30 15:45:24 +01:00
Hans-Kristian Arntzen
4e7777c443 Update to latest glslang/SPIRV-Tools.
Fix various bugs along the way.
2019-01-30 13:41:57 +01:00
Hans-Kristian Arntzen
3e09879131 Support initializers on StorageClassOutput. 2019-01-30 10:29:08 +01:00
Hans-Kristian Arntzen
d92de00cc1 Rewrite how IDs are iterated over.
This is a fairly fundamental change on how IDs are handled.
It serves many purposes:

- Improve performance. We only need to iterate over IDs which are
  relevant at any one time.
- Makes sure we iterate through IDs in SPIR-V module declaration order
  rather than ID space. IDs don't have to be monotonically increasing,
  which was an assumption SPIRV-Cross used to have. It has apparently
  never been a problem until now.
- Support LUTs of structs. We do this by interleaving declaration of
  constants and struct types in SPIR-V module order.

To support this, the ParsedIR interface needed to change slightly.
Before setting any ID with variant_set<T> we let ParsedIR know
that an ID with a specific type has been added. The surface for change
should be minimal.

ParsedIR will maintain a per-type list of IDs which the cross-compiler
will need to consider for later.

Instead of looping over ir.ids[] (which can be extremely large), we loop
over types now, using:

ir.for_each_typed_id<SPIRVariable>([&](uint32_t id, SPIRVariable &var) {
	handle_variable(var);
});

Now we make sure that we're never looking at irrelevant types.
2019-01-10 12:52:56 +01:00
Hans-Kristian Arntzen
ddfd261776 Fix input array size in tessellation evaluation shaders. 2019-01-09 10:47:16 +01:00
Hans-Kristian Arntzen
d4926a0405 Deal with phi copies which happen inside continue blocks. 2019-01-07 14:24:07 +01:00
Hans-Kristian Arntzen
c8ddf7e7d5 Fix case where OpPhi is used to swap values. 2019-01-07 13:54:16 +01:00
Hans-Kristian Arntzen
211abfb7ef
Merge pull request #799 from KhronosGroup/fix-780
Use correct block-name / other-name aliasing rules.
2019-01-04 16:08:10 +01:00
Hans-Kristian Arntzen
9728f9c1b7 Use correct block-name / other-name aliasing rules.
A block name cannot alias with any name in its own scope,
and it cannot alias with any other "global" name.

To solve this, we need to complicate the name cache updates a little bit
where we have a "primary" namespace and "secondary" namespace.
2019-01-04 15:02:54 +01:00
Hans-Kristian Arntzen
acae607703 Register implied expression reads in OpLoad/OpAccessChain.
This is required to avoid relying on complex sub-expression elimination
in compilers, and generates cleaner code.

The problem case is if a complex expression is used in an access chain,
like:

Composite comp = buffer[texture(...)];
vec4 a = comp.a + comp.b + comp.c;

Before, we did not have common subexpression tracking for
OpLoad/OpAccessChain, so we easily ended up with code like:

vec4 a = buffer[texture(...)].a + buffer[texture(...)].b + buffer[texture(...)].c;

A good compiler will optimize this, but we should not rely on it, and
forcing texture(...) to a temporary also looks better.

The solution is to add a vector "implied_expression_reads", which works
similarly to expression_dependencies. We also need an extra mechanism in
to_expression which lets us skip expression read checking and do it
later. E.g. for expr -> access chain -> load, we should only trigger
a read of expr when using the loaded expression.
2019-01-04 14:56:12 +01:00
Hans-Kristian Arntzen
61f1d8b2cf Support gl_HelperInvocation on GLSL and MSL.
There is no obvious builtin for this on HLSL.
2018-11-28 15:18:43 +01:00
Hans-Kristian Arntzen
04f410d35c Fix unsigned switch case selectors. 2018-11-26 10:36:50 +01:00
Hans-Kristian Arntzen
816c1167ce Handle invariant decoration more robustly.
Avoids certain cases of variance between translation units by forcing
every dependent expression of a store to be temporary.
Should avoid the major failure cases where invariance matters.
2018-11-22 11:55:57 +01:00
Hans-Kristian Arntzen
fa42ed37ba Parser: Handle group decorations. 2018-11-15 10:51:52 +01:00
Hans-Kristian Arntzen
2a8a4fe706 GLSL: Support extended arithmetic opcodes.
- uaddCarry
- usubBorrow
- umulExtended
- imulExtended
2018-11-13 14:50:46 +01:00
Hans-Kristian Arntzen
4e5c8d7199 Deal with depth_greater/depth_less qualifiers.
Adds support on HLSL SM 5.0, and fixes bug on GLSL.
Makes sure early fragment tests is tested on MSL as well.
2018-11-12 10:35:36 +01:00
Chip Davis
0d949e11ff Support bitcasts of 16-bit types. 2018-11-05 14:56:36 -06:00
Chip Davis
ca4744ab72 Support constants of 16-bit integral type in GLSL and MSL.
Constants of 8-bit type aren't supported in GLSL, since there's no
extension letting you use them.
2018-11-02 14:39:55 -05:00
Chip Davis
117ccf407c Use specific base types for 8- and 16-bit integers. 2018-11-01 17:45:10 -05:00
Chip Davis
1fb27b4cda Add support for 8- and 16-bit types to GLSL and MSL.
In GLSL, 8-bit types require GL_EXT_shader_8bit_storage. 16-bit types
can use either GL_AMD_gpu_shader_int16/GL_AMD_gpu_shader_half_float or
GL_EXT_shader_16bit_storage.
2018-11-01 10:20:57 -05:00
Hans-Kristian Arntzen
480acdad18 Deal with OpSpecConstantOp used as array size.
When trying to validate buffer sizes, we usually need to bail out when
using SpecConstantOps, but for some very specific cases where we allow
unsized arrays currently, we can safely allow "unknown" sized arrays as
well.

This is probably the best we can do, when we have even more difficult
cases than this, we throw a more sensible error message.
2018-11-01 14:58:02 +01:00
Hans-Kristian Arntzen
d4ad1e266a Add test case for local_size_x_id and some complex cases. 2018-11-01 11:23:48 +01:00
Hans-Kristian Arntzen
62db535b3f Update tests. 2018-11-01 11:23:48 +01:00
Grigory Dzhavadyan
a5d82d1138 Alter the handling of spec consts in non-Vulkan GLSL
Previously, when generating non-Vulkan GLSL, each use of a spec constant
would be subsituted for its default value and the declaration of the constant
itself would be omitted completely.

This change slightly alters this behavior. The uses of the constant are kept,
as well as the declaration, although the latter is stripped of the layout
qualifier. The declaration is also prepended with the following code:

    #ifndef <constant name>_value
    #define <constant name> <default constant value>
    #endif

and the constant itself now looks like

    const <constant type> <constant name> = <constant name>_value;

The rationale for this change is that it gives the user a way to provide
custom values for specialization constants even when the target does not
support them.
2018-11-01 00:39:09 -07:00
Hans-Kristian Arntzen
6157bf3cae Add Windows support in Travis CI.
- Add new Windows support
- Use CMake/CTest instead of Make + shell scripts
- Use --parallel in CTest
- Fix CTest on Windows
- Cleanups in test_shaders.py
- Force specific commit for SPIRV-Headers
- Fix Inf/NaN odd-ball case by moving to ASM
2018-10-27 00:22:30 +02:00
Hans-Kristian Arntzen
c07c303999 Use GL_EXT_samplerless_texture_functions in Vulkan GLSL. 2018-09-27 13:36:38 +02:00
Hans-Kristian Arntzen
af75ef005f Update glslang and SPIRV-Tools.
A lot of changes in spirv-opt output.
Some new invalid SPIR-V was found but most of them were not significant
for SPIRV-Cross, so just marked them as invalid.
2018-09-27 11:10:22 +02:00
Hans-Kristian Arntzen
a985ac9499 Add test case for continue out of switch default block. 2018-09-18 11:01:15 +02:00
Hans-Kristian Arntzen
3b5968bb26 Deal with switch cases which break out of a loop.
Need some pretty hideous ladder variable system, but high level
languages do not support breaking out of a loop. break in switch blocks
and break in loops alias each other.
2018-09-18 10:50:48 +02:00
Hans-Kristian Arntzen
737715214e Implement atomic increment/decrement in GLSL and HLSL. 2018-09-17 15:54:21 +02:00
Hans-Kristian Arntzen
32a0d05e05 Bitcast loads from builtin compute variables. 2018-09-11 09:43:28 +02:00
Hans-Kristian Arntzen
63f6466065 Support Component decoration in GLSL. 2018-09-10 12:13:26 +02:00
Hans-Kristian Arntzen
af672b7a4b Add composite array test shaders for GLSL and HLSL as well. 2018-09-10 10:21:08 +02:00
Hans-Kristian Arntzen
93e167eb0f Add some uncommitted reference files. 2018-09-03 12:39:40 +02:00
Hans-Kristian Arntzen
87de951105 MSL: Fix naming issue of aliased global variables.
When the name of an alias global variable collides with a global
declaration, MSL would emit inconsistent names, sometimes with the
naming fix, sometimes without, because names were being tracked in two
separate meta blocks. Fix this by always redirecting parameter naming to
the original base variable as necessary.
2018-08-27 09:59:55 +02:00
Hans-Kristian Arntzen
ae859934ca Use GL_NV_gpu_shader5 as a fallback for AMD_gpu_shader_half_float. 2018-08-23 15:37:09 +02:00
Hans-Kristian Arntzen
f6ec83e5d4 GLSL: Allow blocks to have their own namespace. 2018-08-21 11:29:08 +02:00
Hans-Kristian Arntzen
eee290a029 MSL: Fix support for texelFetchOffset.
Just apply the offset directly, MSL has no immediate offset parameter.
2018-08-07 15:28:04 +02:00
Hans-Kristian Arntzen
361fe52c9d MSL: Properly support passing parameters by value.
MSL would force thread const& which would not work if the input argument
came from a different storage class.

Emit proper non-reference arguments for such values.
2018-08-06 15:43:51 +02:00
Hans-Kristian Arntzen
34a21b96cf Add test case for phi-only continue block. 2018-08-06 14:06:40 +02:00
Hans-Kristian Arntzen
e1367e609a Fix a lot of redundant code when loading flattened composites. 2018-07-06 10:57:23 +02:00
Hans-Kristian Arntzen
dcddd5326e Add LUT test cases for OpVariable with initializer. 2018-07-05 14:51:07 +02:00
Hans-Kristian Arntzen
5582523d9a Add some tests for LUT promotion.
Also, update other tests.
2018-07-05 14:14:18 +02:00
Hans-Kristian Arntzen
d29f48ef06 Deduce constant LUTs from read-write variables. 2018-07-05 13:25:57 +02:00
Hans-Kristian Arntzen
e044732896 Support OpTypeImage with depth == 2 (unknown) properly.
Track which OpSampledImages are ever used with Dref opcodes.
2018-07-04 14:26:23 +02:00
Hans-Kristian Arntzen
ffa9133d77 Support ternary expressions in OpSpecConstantOp. 2018-06-25 09:49:13 +02:00
Hans-Kristian Arntzen
d94d20f4f3 Deal with some builtins being declared with wrong signedness. 2018-06-22 11:30:56 +02:00
Hans-Kristian Arntzen
9d31154917 Deal with switch case labels which share a block. 2018-06-20 10:49:28 +02:00
Hans-Kristian Arntzen
6bcc890e63 Sanitize underscores in general, not just for members. 2018-06-04 10:13:57 +02:00
Hans-Kristian Arntzen
7cba89b4a5 Add reference files for SREM. 2018-05-24 10:26:11 +02:00
Hans-Kristian Arntzen
991b655c72 Declare OpSpecConstantOp up-front on relevant targets.
Required, since spec constants can include results from constant ops.
2018-05-15 14:20:16 +02:00
Hans-Kristian Arntzen
3951b9456f Fix SpecConstantComposite if input is SpecConstantOp. 2018-05-15 11:16:06 +02:00
Hans-Kristian Arntzen
7eba247864 Handle inout properly with split access chains.
Found some other issues. Had some bugs with variable writes not properly
invalidating if writes came from split access chains.
2018-05-11 10:15:42 +02:00
Hans-Kristian Arntzen
b71f5dfc0c Fix split access chains for builtin arrays. 2018-05-08 15:34:20 +02:00
Pascal Muetschard
aced6058b4 Don't limit GLSL identifiers with HLSL keywords.
- The HLSL compiler now has its own list of keywords in addition to
   the ones from GLSL.
 - Added "buffer", "precise", and "shared" to the GLSL keywords.
2018-05-07 10:58:52 -07:00
Hans-Kristian Arntzen
85a8f066f4 Do not use RMW rewrite for matrices.
Does not work on MSL.
2018-05-04 10:35:56 +02:00
Hans-Kristian Arntzen
d2df067dd4 Force recompile if we add row-major transpose functions in MSL. 2018-05-04 09:43:34 +02:00
Hans-Kristian Arntzen
17be3c652f Deal with fake overloads when using combined image samplers. 2018-05-02 10:36:00 +02:00
Hans-Kristian Arntzen
47081f810a Fix GatherDref on GLSL. 2018-04-30 12:45:23 +02:00
Hans-Kristian Arntzen
40bbf6be7a Build combined dummy samplers for Query functions without sampler as well.
Deal with various query functions which require dummy sampler.
In SPIR-V, separate images are used, but GLSL (even Vulkan GLSL)
requires combined sampler images ...
2018-04-30 12:08:33 +02:00
Hans-Kristian Arntzen
d93807a625 Deal with OpImageFetch without explicit LOD. 2018-04-30 10:54:44 +02:00
Hans-Kristian Arntzen
aaf397cd1f Fix usage tracking issue for OpImage. 2018-04-27 11:11:24 +02:00
Hans-Kristian Arntzen
893ed379d5 Remove some stale test files. 2018-04-27 10:33:27 +02:00
Hans-Kristian Arntzen
18958ecccb Add test for combined-sampler-reuse on GLSL. 2018-04-27 10:31:25 +02:00
Hans-Kristian Arntzen
0280800a8f Fix case where SampledImage would get flushed to temporary. 2018-04-27 10:06:30 +02:00
Hans-Kristian Arntzen
f56433b802 Add new tests for combined arrays of sampler + image. 2018-04-23 12:28:05 +02:00
Hans-Kristian Arntzen
146ea76f52 Add test shader for subgroup.
Update SPIRV-Tools/glslang commits.
Use vulkan1.1 environment for testing.
Found new "errors" in SPIRV-Tools, so disable validation on those shaders
for now.
2018-04-11 10:29:47 +02:00
Hans-Kristian Arntzen
694b314f87 Support empty structs.
Need to fake it by pretending it has one dummy member.
2018-04-05 16:26:54 +02:00
Hans-Kristian Arntzen
05c66f9cac Add test shader which uses counter buffer extension. 2018-04-04 12:56:34 +02:00
Hans-Kristian Arntzen
a6e211e00b Support dual-source blending on GLSL and MSL. 2018-04-03 16:04:49 +02:00
Hans-Kristian Arntzen
c1947aa447 Update glslang/SPIRV-Tools on Travis. 2018-03-24 04:16:18 +01:00
Hans-Kristian Arntzen
35f64d03bb Fix name aliasing for temporary variables. 2018-03-24 01:53:49 +01:00
Hans-Kristian Arntzen
e7bf8d2f48 Refactor out noopt shaders to their own folders.
Makes maintenance easier with less clutter.
2018-03-13 10:39:49 +01:00
Hans-Kristian Arntzen
938c7debed Handle control-dependent temporaries.
Derivatives, subgroup and implicit-lod instructions all need to happen
in the block they were created.
2018-03-12 17:34:54 +01:00
Hans-Kristian Arntzen
9fbd8b789e Update tests for latest SPIRV-Tools and glslang. 2018-03-12 15:11:55 +01:00
Hans-Kristian Arntzen
e3b8e9455c Add test shader where a phi variable invalidates a temporary.
The temporary in question is used to flush a phi variable.
2018-03-09 14:42:26 +01:00
Hans-Kristian Arntzen
e0efa737ca Expand the implementation of inherit_expression_dependencies. 2018-03-09 13:21:38 +01:00
Hans-Kristian Arntzen
28cccc3dbb Emit complex continue blocks "properly". 2018-03-08 17:59:21 +01:00
Hans-Kristian Arntzen
54549a624f Add some test shaders for special merge methods. 2018-03-08 16:48:50 +01:00
Hans-Kristian Arntzen
922420e346 Disallow arrays and structs from becoming loop variables.
Fixes awkward code-gen issue.
2018-03-07 14:54:11 +01:00
Hans-Kristian Arntzen
0780820a7b Skip interpolateAt tests with FP16. 2018-03-07 10:58:38 +01:00
Hans-Kristian Arntzen
547278da12 Test denormal fp16 constants. 2018-03-06 17:09:18 +01:00
Hans-Kristian Arntzen
05348a66ca Add test shader for FP16 support. 2018-03-06 17:09:18 +01:00
Hans-Kristian Arntzen
5fe79eb59c Update tests.
Adds an earlier reported shader packing failure into regression suite.
2018-03-05 16:34:42 +01:00
Hans-Kristian Arntzen
3c1b147272 Support Invariant for BuiltInPosition. 2018-03-01 12:31:39 +01:00
Hans-Kristian Arntzen
dd603eab58 Support spec constant array size in blocks.
Won't really be correct if the spec constant is changed outside
SPIRV-Cross, but nothing we can do about that, really.
2018-02-23 15:11:45 +01:00
Hans-Kristian Arntzen
a04bdcc7f7 Handle overloaded functions which share the same OpName.
Awkward, but legal SPIR-V.
2018-02-23 14:15:51 +01:00
Hans-Kristian Arntzen
047ad7df0f Support special float constants (NaN/Inf). 2018-02-23 13:06:20 +01:00
Hans-Kristian Arntzen
fb3f92a3ff Overhaul clip/cull distance support in GLSL. 2018-02-22 14:36:50 +01:00
Hans-Kristian Arntzen
1a2e4de7a5 Add test for texelFetch without sampler. 2018-02-21 13:45:59 +01:00
Hans-Kristian Arntzen
8a3bef2bd6 Add OpFRem tests. 2018-02-15 13:36:59 +01:00
Hans-Kristian Arntzen
843e34b604 Add IsFrontFace support to HLSL. 2018-02-15 12:42:56 +01:00
Hans-Kristian Arntzen
636cc30088 Fix case where hoisted temporaries were used before being declared. 2018-02-15 10:52:56 +01:00
Hans-Kristian Arntzen
00ccd590ee Return arrays in HLSL/MSL by writing to an output variable instead. 2018-02-08 12:22:08 +01:00
Hans-Kristian Arntzen
9fa91f7e1c Support returning arrays from functions in GLSL/MSL.
Not possible in HLSL apparently, need workaround ...
2018-02-08 12:22:08 +01:00
Hans-Kristian Arntzen
5d9df6a31c Do not declare constant composites inline in HLSL.
Move arrays and structs out to their own global static constants.

Also, replace illegal names in HLSL as well.
2018-02-02 10:12:26 +01:00
Hans-Kristian Arntzen
8841f15283 Fix case where loop header branches into continue block. 2018-02-01 10:00:16 +01:00
Hans-Kristian Arntzen
6714a9fa23 Need to sort declared temporaries to ensure stable output. 2018-01-29 10:24:15 +01:00
Hans-Kristian Arntzen
b3f6e3de8e Fix CFG::update_common_dominator.
The algorithm was too conservative causing lots of unnecessary
temporaries to be created.
2018-01-24 20:32:11 +01:00
Hans-Kristian Arntzen
09f550f718 Handle exponential explosion of code-gen during first phase of compile.
Certain patterns with OpVectorShuffle (and probably others) will cascade
to so large, that they can cause OOM. After we have observed
force_recompile, don't spend unnecessary memory emitting code which will
never be used.
2018-01-24 18:12:41 +01:00
Hans-Kristian Arntzen
af0a887997 Add test for false loop init.
Clean up how for loop variables are declared.
2018-01-23 21:15:09 +01:00
Hans-Kristian Arntzen
d0ce948df4 Do not merge swizzles for anything other than vectors. 2018-01-22 09:52:57 +01:00
Hans-Kristian Arntzen
7d223b8987 Fix CFG for forwarded temporaries.
Forwarded temporaries would never declare a temporary.
Figure out all result types ahead of time so we can deal with those
temporaries as well.
2018-01-18 12:11:33 +01:00
Hans-Kristian Arntzen
b902d5400c Do not use inline for-loop initializers with different types. 2018-01-16 10:27:58 +01:00
Hans-Kristian Arntzen
0f4adaa09d Handle OpUnreachable in code-gen.
Forgot to add it to emit_block_chain. It should just be a noop.
2018-01-15 09:35:09 +01:00
Hans-Kristian Arntzen
d4e470babd Analyze the CFG for temporaries as well.
Normally, temporary declaration must dominate any use of it,
so we generally did not need to analyze the CFG for these variables,
but there is an edge case where you have an inliner doing:

do {
	create_temporary;
	break;
} while(0);

use_temporary;

The inside of the loop dominates the outer scope, but we cannot emit
code like this in GLSL, so make sure we hoist these temporaries outside
the "loop".
2018-01-12 10:56:11 +01:00
Hans-Kristian Arntzen
27ad8c0922 Add more exhaustive test for barrier handling. 2018-01-09 12:26:46 +01:00
Hans-Kristian Arntzen
166eed8c18 Add test shaders for barriers. 2018-01-09 12:19:31 +01:00