This might be easier than building with SK_USE_SKVM_BLITTER defined.
Change-Id: I72c1f361195bacf5a14e6633dd49e9a5ad721cff
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/264383
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
- allow clients to pass in raw-array at public level
- rewrite m44 concat to take raw-array for 2nd input
Extended canvas_matrix bench to also time 44 concats:
Before
207.51 canvas_matrix_4x4 8888
100.75 ? canvas_matrix_3x3 8888
100.79 canvas_matrix_2x3 8888
140.93 canvas_matrix_scale 8888
133.35 canvas_matrix_trans 8888
After
120.80 canvas_matrix_4x4 8888
...
bug: skia:9768
Change-Id: Iaa361b9897a183d930fd31aa67327caed25cd51d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263209
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit dff4c1d5fd.
Reason for revert: Fix WIP
Original change's description:
> Revert "Avoid loop-dependent behavior in GrMemoryPoolBench"
>
> This reverts commit f811fc331a.
>
> Reason for revert: breaks on iOS
>
> Original change's description:
> > Avoid loop-dependent behavior in GrMemoryPoolBench
> >
> > This helps stability of benchmark across repeated runs, and across code
> > changes. Previously, a change to the tuned loop count could radically
> > change the allocation behavior within the loop's iteration and lead to
> > unfair comparisons.
> >
> > In addition, this separates the stack allocation pattern into N allocations
> > followed by N LIFO releases, and a push-pop alternating pattern of N
> > allocates and releases (so still LIFO, but reuses the memory at the start
> > of a block).
> >
> > In later CLs experimenting on the memory pool, I found that there were
> > surprising effects on performance linked to the specific interaction between
> > the allocation size, per-allocation metadata, and per-block metadata. To
> > help differentiate these coincidences, this adds two modes of allocation
> > where one should already be aligned.
> >
> > It also moves away from a global pool, so that it's possible to benchmark
> > on different block sizes and factor in the allocation/release cost of the
> > actual blocks (vs. the cursor management of a larger sized pool). As part
> > of this, the new/delete reference operator is added as an explicit benchmark.
> >
> > Change-Id: I12b8c11cb75db0df70460fe2e8cf6c029db7eb22
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262936
> > Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
>
> TBR=bsalomon@google.com,michaelludwig@google.com
>
> Change-Id: I16f2810699a378eb5a516ab9fb1834c10b65f01b
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263029
> Reviewed-by: Michael Ludwig <michaelludwig@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Change-Id: I51a9db111c26b49572c3fa0928e26ef6e5a7a74c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263196
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
The reason for the assert was breaking an assert, that if the CTM was scale/translate, that after
a preTranslate, it should still be that.
This is true... unless the new translate values are non-finite. In that case, we might turn a zero
into a NaN, (0 * non_finite --> nan), so we either have to require finite args (which we don't
at the moment) or we can't make this assert. This re-land removes that assert.
This reverts commit 268ed57d71.
Change-Id: I3c48a0aa17649351a246c1fbab5449f2d59aaf84
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263023
Commit-Queue: Mike Reed <reed@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit f811fc331a.
Reason for revert: breaks on iOS
Original change's description:
> Avoid loop-dependent behavior in GrMemoryPoolBench
>
> This helps stability of benchmark across repeated runs, and across code
> changes. Previously, a change to the tuned loop count could radically
> change the allocation behavior within the loop's iteration and lead to
> unfair comparisons.
>
> In addition, this separates the stack allocation pattern into N allocations
> followed by N LIFO releases, and a push-pop alternating pattern of N
> allocates and releases (so still LIFO, but reuses the memory at the start
> of a block).
>
> In later CLs experimenting on the memory pool, I found that there were
> surprising effects on performance linked to the specific interaction between
> the allocation size, per-allocation metadata, and per-block metadata. To
> help differentiate these coincidences, this adds two modes of allocation
> where one should already be aligned.
>
> It also moves away from a global pool, so that it's possible to benchmark
> on different block sizes and factor in the allocation/release cost of the
> actual blocks (vs. the cursor management of a larger sized pool). As part
> of this, the new/delete reference operator is added as an explicit benchmark.
>
> Change-Id: I12b8c11cb75db0df70460fe2e8cf6c029db7eb22
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262936
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,michaelludwig@google.com
Change-Id: I16f2810699a378eb5a516ab9fb1834c10b65f01b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263029
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
This helps stability of benchmark across repeated runs, and across code
changes. Previously, a change to the tuned loop count could radically
change the allocation behavior within the loop's iteration and lead to
unfair comparisons.
In addition, this separates the stack allocation pattern into N allocations
followed by N LIFO releases, and a push-pop alternating pattern of N
allocates and releases (so still LIFO, but reuses the memory at the start
of a block).
In later CLs experimenting on the memory pool, I found that there were
surprising effects on performance linked to the specific interaction between
the allocation size, per-allocation metadata, and per-block metadata. To
help differentiate these coincidences, this adds two modes of allocation
where one should already be aligned.
It also moves away from a global pool, so that it's possible to benchmark
on different block sizes and factor in the allocation/release cost of the
actual blocks (vs. the cursor management of a larger sized pool). As part
of this, the new/delete reference operator is added as an explicit benchmark.
Change-Id: I12b8c11cb75db0df70460fe2e8cf6c029db7eb22
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262936
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit 98bfcc7ff3.
Reason for revert: Flutter hitting assert:
../../third_party/skia/src/core/SkCanvas.cpp:1432: fatal error: "assert(fIsScaleTranslate == fMCRec->fMatrix.isScaleTranslate())"
Original change's description:
> Extend SkCanvas matrix stack to be 4x4, but with (basically) the same public API.
>
> Devices receive the 4x4, but by default they simply downsample it to SkMatrix.
>
> New SkM44 matrix for the impl. It differs from SkMatrix44 in a few ways
> - no tracking of "type"
> - faster for concat, as it does not use doubles for intermediates
> - much simpler API
>
> There are some low-bit differences in some gms, so adding a flag for clients to
> stage this change. (due to faster but lower-precision in SkM44::concat)
>
> Performance: running canvas_matrix bench
>
> 3x3 version:
>
> 167.93 canvas_matrix_3x3 8888
> 209.97 canvas_matrix_2x3 8888
> 174.87 canvas_matrix_scale 8888
> 135.30 canvas_matrix_trans 8888
>
> 4x4 version:
>
> 116.59 canvas_matrix_3x3 8888
> 105.40 canvas_matrix_2x3 8888
> 159.83 ? canvas_matrix_scale 8888
> 113.47 canvas_matrix_trans 8888
>
> Why faster?
> - not tracking matrix_type helps a lot it seems
> - faster full concat (no doubles)
>
> Before adding the specialized preConcats...
>
> 318.11 ? canvas_matrix_3x3 8888
> 339.38 canvas_matrix_2x3 8888
> 383.28 canvas_matrix_scale 8888
> 251.67 canvas_matrix_trans 8888
>
> Change-Id: I68eac942919fa5418081e789f31710a1e2a752da
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262056
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=mtklein@google.com,bsalomon@google.com,herb@google.com,fmalita@chromium.org,fmalita@google.com,reed@google.com,michaelludwig@google.com
Change-Id: I28c3d69c19ba44ab65ca7c059221b64c7dffef22
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263021
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 1c16b43033.
Reason for revert: Red on tree
Original change's description:
> Move makeDeferredRenderTargetContext calls to factory on RTC.
>
> Change-Id: Iaa8f5829d9f8650ff27a60f75fb2216f016ab85e
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262058
> Commit-Queue: Greg Daniel <egdaniel@google.com>
> Reviewed-by: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: I9e3c9d13c66b5437c87ad7136d283fa4ac81df1f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/263019
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Devices receive the 4x4, but by default they simply downsample it to SkMatrix.
New SkM44 matrix for the impl. It differs from SkMatrix44 in a few ways
- no tracking of "type"
- faster for concat, as it does not use doubles for intermediates
- much simpler API
There are some low-bit differences in some gms, so adding a flag for clients to
stage this change. (due to faster but lower-precision in SkM44::concat)
Performance: running canvas_matrix bench
3x3 version:
167.93 canvas_matrix_3x3 8888
209.97 canvas_matrix_2x3 8888
174.87 canvas_matrix_scale 8888
135.30 canvas_matrix_trans 8888
4x4 version:
116.59 canvas_matrix_3x3 8888
105.40 canvas_matrix_2x3 8888
159.83 ? canvas_matrix_scale 8888
113.47 canvas_matrix_trans 8888
Why faster?
- not tracking matrix_type helps a lot it seems
- faster full concat (no doubles)
Before adding the specialized preConcats...
318.11 ? canvas_matrix_3x3 8888
339.38 canvas_matrix_2x3 8888
383.28 canvas_matrix_scale 8888
251.67 canvas_matrix_trans 8888
Change-Id: I68eac942919fa5418081e789f31710a1e2a752da
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/262056
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Change-Id: I0b11d4210c6e663cfb4854fc33e1396fd79fe9a4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The interpreter doesn't (yet) support all GPU intrinsics, so adjust the
code to avoid 'max' and 'saturate'.
The interpreter is more picky about uniform blocks being the correct
size, so don't pass the color matrix data to the "None" effect, which
has no uniforms.
Change-Id: I4609f913eaa762ca171b2875eb25d23141a0646c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261931
Auto-Submit: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Updated internal usage of SkRuntimeColorFilterFactory to use this
instead. Once this lands, we can update SkiaRenderer in Chrome to
use it, and remove SkRuntimeColorFilterFactory.
This doesn't support a CPU callback function in the runtime color
filter - I don't think we're going to support that in the long term.
Change-Id: I714413bd590cf5cf4416ef62809a6e1d92211688
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261681
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
- have to commit to a perspective stage (used to only use affine)
- coordinate between updater and shader/stages
Benches:
verts 608 --> 270
atlas 17.9 --> 5.6
Change-Id: I1d1ce9eb27b49d2ddcc610f6ea5c4720901b9e1b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/261136
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Most of these did nothing, and I'd like to remove the feature. Also, the
benchmark was using 'in uniform' which isn't supported (it asserts in
debug build).
Change-Id: I671ca69fdd50811a2090c7a03f5f23e6b38e6f96
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/260043
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Change-Id: I7c672ff6b8eb95ec8c1123a5bfdb202e1644f494
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/259281
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Saves one heap allocation per DDL recorded.
Change-Id: I9393aedc3b48031cd2ea5f0160b107915077099a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/259419
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This is a first step towards pulling the creation of the GrProgramInfos explicitly into the Ops' onExecute methods. We need this behavior so programInfo creation can be moved forward to onPrePrepare.
For now, pipeline creation is a static member on GrSimpleMeshDrawOpHelper so GrPipeline creation can be bottle-neckedOps for Ops that don't use the helper. In some future world CreatePipeline could become non-static to reduce some of the duplicate code.
Bug: skia:9455
Change-Id: I2d35dd223db824e84616f5df0f1dca34c1b6e412
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/258003
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Drop unnecessary () in `const char* (*fText)`. Sure, whatever.
Then a couple tweaks where we use strncpy():
In one case in SkICC.cpp, GCC warns us we're passing sizeof(dst) as
the copy count, which can be error prone because you may miss a
terminating nul. I believe the existing strncpy() behavior is what
we want here, so I've stifled this and left a note. We don't really
want a terminating nul... we want a zero fill of the remaining dst.
On the other side of that if-statment in that same function, GCC
warns that we've passed exactly sizeof(src) as the copy count when
writing the calculated description prefix, which again might be
buggy due to a missed terminating nul. Seemed like memcpy() was the
way to go here for that prefix. Ultimately we check to make sure we
wrote every single destination byte.
Over in SkPDFMetadata.cpp, strncpy() is concerned once again that
we're copying strlen(src) and thus omitting the terminating nul. As
usual we don't want that terminating nul, so switch to memcpy() to
make that explicit.
I'm starting to think strncpy() is too helpful to reason about sanely.
Change-Id: I1bcd5f4e406ca388c1c236c5f3ee531bf1737705
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/257408
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
When iterating over the coord transforms or texture samplers of a
FP also have access to the owning FP.
Pass a coord transform range to GPs rather than a pointer to an
iterator.
Change-Id: If7c829a67dce6600d7f49e12d6f49f685dcace3a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/256216
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
This reverts commit 3e7af41224.
Change-Id: Id4f66b3956f4bdbe690db20fc478b7365ee89717
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/256676
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
This reverts commit 1792b19485.
Reason for revert: need to update legacy_convexity, still used by google3
Original change's description:
> Revert "Revert "Use flat version of path-direction enum""
>
> This reverts commit 0dacc6b7d3.
>
> Change-Id: Ie103e9f36b07e4ee256a3688a4decf3a6dd74314
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255832
> Auto-Submit: Mike Reed <reed@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Mike Reed <reed@google.com>
TBR=reed@google.com
Change-Id: I0ecea0eb8a237298c6b908cc4bfd1cacdfc5b900
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255976
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 0dacc6b7d3.
Change-Id: Ie103e9f36b07e4ee256a3688a4decf3a6dd74314
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255832
Auto-Submit: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit e0fbe94351.
Reason for revert: need to add guard flag to flutter
Original change's description:
> Use flat version of path-direction enum
>
> Bug: skia:9663
> Change-Id: I00077d9f2b14b3e983e6a46ef6f560cabdb1678d
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/242557
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Florin Malita <fmalita@chromium.org>
TBR=fmalita@chromium.org,reed@google.com
Change-Id: If47173d9b203b2d3a175af290a15d986accb4703
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:9663
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255831
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This CL is 100% plumbing. We ultimately want all GrPrimitiveProcessor-derived objects to not be refCounted. This will make several helper objects POD and, by putting them into an arena, will make managing their lifetime easier (e.g., for DDL prePreparing).
Note: the CCPR GrGeometryProcessor-derived classes only ever appear on the stack so aren't forced into arenas.
Bug: skia:9455
Change-Id: Ib9be503d2fbf8c2578642df93fc301156629829d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/255304
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Handy if you want to flush, or otherwise understand the underlying buffer(s).
Change-Id: I3d6610695c8603232192b26c687c6c74512165dd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/254803
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
More cleaning to do if we like this idea...
Change-Id: I608143db085911565dd5f5426f7ee6436ec58cdf
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/254680
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
This further consolidates the information required to compute the program key (esp. for Vulkan). This CL mainly comprises the plumbing portion - a follow up CL will actually use it.
Bug: skia:9455
Change-Id: Iaac716c289916981a1757a333bfa57b3051fd35b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/252161
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Propagating usage of these helpers will, hopefully, improve code reuse and centralize future changes.
This is pulled out of https://skia-review.googlesource.com/c/skia/+/252161/ (Add GrPrimitiveType to GrProgramInfo)
Bug: skia:9455
Change-Id: I9b46e42db8561d98fb724a41a1f7a3bec4bf97b0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/252484
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
This reverts commit e63595dd85.
Reason for revert: Breaking the Perf tests:
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall]
Command exited with code 139
#######################################
symbolized stacktrace follows
#######################################
build/nanobench BulkRectBench<1000, (RectangleLayout)1, (ImageMode)2, (DrawMode)2>::onPerCanvasPreDraw(SkCanvas*) at skia/bench/BulkRectBench.cpp:218
build/nanobench main at skia/bench/nanobench.cpp:1277
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf1)[0x7f1213dad2e1]
build/nanobench _start at ??:?
Original change's description:
> Add variety of bulk API benchmarks
>
> Covers drawing 1000 anti-aliased rectangles, either sharing 1 image, using
> a unique image, or as a solid color. Tests using the bulk APIs and regular
> one-at-a-time drawing.
>
> Change-Id: Icdf5a1f6df229aed785212d0941b89c11aa785c0
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/251003
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com,egdaniel@chromium.org,michaelludwig@google.com
Change-Id: I3b26d5a04c472993585242a108c2764ea2b96940
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/251213
Reviewed-by: Joe Gregorio <jcgregorio@google.com>
Commit-Queue: Joe Gregorio <jcgregorio@google.com>
Covers drawing 1000 anti-aliased rectangles, either sharing 1 image, using
a unique image, or as a solid color. Tests using the bulk APIs and regular
one-at-a-time drawing.
Change-Id: Icdf5a1f6df229aed785212d0941b89c11aa785c0
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/251003
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Use `extra_cflags=["-DSK_CAPTURE_DRAW_TEXT_BLOB"]` to enable.
Change-Id: I1d6db478ee91696cdce090647b889c17a83a2718
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/250259
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Herb Derby <herb@google.com>
There is a bug on Pixel and Pixel2 devices where the program
eventually terminates with a non-zero exit code. Closing the
outResultsFile between JSON flushes seems to fix it (for whatever
reason).
Bug: b/143074513
Change-Id: I935e982e88758fda19292129c8031f8501cca615
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/249821
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This is a reland of 6fc04f88a8
Original change's description:
> Reland "SkSurface asynchronous read APIs allow client to extend pixel lifetime"
>
> This is a reland of ce240cc6fd
>
> Original change's description:
> > SkSurface asynchronous read APIs allow client to extend pixel lifetime
> >
> > Previously the pixel data passed to the client was only valid during
> > the client's callback. This meant if the client wanted to defer
> > processing of the data a copy was necessary.
> >
> > Now we pass an object to the callback and the pixel lifetime is tied
> > to the lifetime of that object.
> >
> > The object may be holding a GPU transfer buffer mapped. We don't assume
> > that the object will be released on the direct GrContext thread. So
> > when the object is destroyed it posts a message to a new type,
> > GrClientMappedBufferManager, hanging off the direct context. The direct
> > context will periodically check for messages and unmap and then unref
> > buffers so that they can be reused. Currently this is done in
> > GrContext::performDeferredCleanup() and GrDrawingManager::flush().
> >
> > The old API is kept around for backwards compatibility but it is
> > reimplemented as a bridge on top of the new mechanism.
> >
> > Also a utility function to SkImageInfo is added to directly make a new
> > info with a specified dimensions rather than passing the width and
> > height separately to makeWH().
> >
> > Bug: chromium:973403
> > Bug: skia:8962
> >
> > Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> Bug: chromium:973403, skia:8962
> Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:973403, skia:8962
Change-Id: Ie584c1c3ef8021c976f71b708e53871c693cc450
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/246057
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 6fc04f88a8.
Reason for revert: Chrome roll failure suspect because of:
* https://chromium-review.googlesource.com/c/chromium/src/+/1837131 (22 commits)
* https://chromium-review.googlesource.com/c/chromium/src/+/1837214 (24 commits)
Original change's description:
> Reland "SkSurface asynchronous read APIs allow client to extend pixel lifetime"
>
> This is a reland of ce240cc6fd
>
> Original change's description:
> > SkSurface asynchronous read APIs allow client to extend pixel lifetime
> >
> > Previously the pixel data passed to the client was only valid during
> > the client's callback. This meant if the client wanted to defer
> > processing of the data a copy was necessary.
> >
> > Now we pass an object to the callback and the pixel lifetime is tied
> > to the lifetime of that object.
> >
> > The object may be holding a GPU transfer buffer mapped. We don't assume
> > that the object will be released on the direct GrContext thread. So
> > when the object is destroyed it posts a message to a new type,
> > GrClientMappedBufferManager, hanging off the direct context. The direct
> > context will periodically check for messages and unmap and then unref
> > buffers so that they can be reused. Currently this is done in
> > GrContext::performDeferredCleanup() and GrDrawingManager::flush().
> >
> > The old API is kept around for backwards compatibility but it is
> > reimplemented as a bridge on top of the new mechanism.
> >
> > Also a utility function to SkImageInfo is added to directly make a new
> > info with a specified dimensions rather than passing the width and
> > height separately to makeWH().
> >
> > Bug: chromium:973403
> > Bug: skia:8962
> >
> > Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> > Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> > Reviewed-by: Brian Osman <brianosman@google.com>
> > Commit-Queue: Brian Salomon <bsalomon@google.com>
>
> Bug: chromium:973403, skia:8962
> Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com
Change-Id: I9e01d1b82fb399b94292441d91da51176bb161d9
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:973403, skia:8962
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245956
Reviewed-by: Ravi Mistry <rmistry@google.com>
Commit-Queue: Ravi Mistry <rmistry@google.com>
This is a reland of ce240cc6fd
Original change's description:
> SkSurface asynchronous read APIs allow client to extend pixel lifetime
>
> Previously the pixel data passed to the client was only valid during
> the client's callback. This meant if the client wanted to defer
> processing of the data a copy was necessary.
>
> Now we pass an object to the callback and the pixel lifetime is tied
> to the lifetime of that object.
>
> The object may be holding a GPU transfer buffer mapped. We don't assume
> that the object will be released on the direct GrContext thread. So
> when the object is destroyed it posts a message to a new type,
> GrClientMappedBufferManager, hanging off the direct context. The direct
> context will periodically check for messages and unmap and then unref
> buffers so that they can be reused. Currently this is done in
> GrContext::performDeferredCleanup() and GrDrawingManager::flush().
>
> The old API is kept around for backwards compatibility but it is
> reimplemented as a bridge on top of the new mechanism.
>
> Also a utility function to SkImageInfo is added to directly make a new
> info with a specified dimensions rather than passing the width and
> height separately to makeWH().
>
> Bug: chromium:973403
> Bug: skia:8962
>
> Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
Bug: chromium:973403, skia:8962
Change-Id: I5cecd36276c8b6dc942cf549c7095db2df88530c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245678
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit ce240cc6fd.
Reason for revert: crashing in chrome unit test, abandoned context related?
Original change's description:
> SkSurface asynchronous read APIs allow client to extend pixel lifetime
>
> Previously the pixel data passed to the client was only valid during
> the client's callback. This meant if the client wanted to defer
> processing of the data a copy was necessary.
>
> Now we pass an object to the callback and the pixel lifetime is tied
> to the lifetime of that object.
>
> The object may be holding a GPU transfer buffer mapped. We don't assume
> that the object will be released on the direct GrContext thread. So
> when the object is destroyed it posts a message to a new type,
> GrClientMappedBufferManager, hanging off the direct context. The direct
> context will periodically check for messages and unmap and then unref
> buffers so that they can be reused. Currently this is done in
> GrContext::performDeferredCleanup() and GrDrawingManager::flush().
>
> The old API is kept around for backwards compatibility but it is
> reimplemented as a bridge on top of the new mechanism.
>
> Also a utility function to SkImageInfo is added to directly make a new
> info with a specified dimensions rather than passing the width and
> height separately to makeWH().
>
> Bug: chromium:973403
> Bug: skia:8962
>
> Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com,brianosman@google.com
Change-Id: Ic14cf07a7629b167c9f34a651aa87a0326e74207
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:973403, skia:8962
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245721
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Previously the pixel data passed to the client was only valid during
the client's callback. This meant if the client wanted to defer
processing of the data a copy was necessary.
Now we pass an object to the callback and the pixel lifetime is tied
to the lifetime of that object.
The object may be holding a GPU transfer buffer mapped. We don't assume
that the object will be released on the direct GrContext thread. So
when the object is destroyed it posts a message to a new type,
GrClientMappedBufferManager, hanging off the direct context. The direct
context will periodically check for messages and unmap and then unref
buffers so that they can be reused. Currently this is done in
GrContext::performDeferredCleanup() and GrDrawingManager::flush().
The old API is kept around for backwards compatibility but it is
reimplemented as a bridge on top of the new mechanism.
Also a utility function to SkImageInfo is added to directly make a new
info with a specified dimensions rather than passing the width and
height separately to makeWH().
Bug: chromium:973403
Bug: skia:8962
Change-Id: Id5cf04235376170142a48e90d3ecd13fd021a2a6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245457
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Add version SkImageInfo::Make() that takes SkISize instead of separate
width and height.
Change-Id: I42aa79d23b19e22f5405631728c245b04bce0559
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/245172
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
- Update the parameter lists to both run and runStriped so
that they're in the same (sane) order, named consistently,
and always take counts with pointer arguments.
- Add the same count-based safety checks to run that were
already in runStriped.
- Remove the N parameter to run, it was only used to run
things one-at-a-time (other than one spot in unit tests),
and it simplifies the code quite a bit. If you want to run
multiple times, use the striped version. I also moved that
functions 'N' earlier in the parameter list, to make the
pattern of the remaining parameters clearer.
- Remove an interpreter benchmark class that was never used.
Change-Id: Ibff0a47bdb2d29d095a0addd27e65ab13cb80fce
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/244716
Reviewed-by: Ethan Nicholas <ethannicholas@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
On Windows I'm getting:
curr/maxrss loops min median mean max stddev samples config bench
33/38 MB 1495 2.62us 2.65us 2.66us 2.72us 1% .o.o.oO.OO gl DDLRecorder
Change-Id: I529e6ac612c455915c166472124b08647eb7bffd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/241039
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Also don't specify redundant width/height to SkGpuDevice.
Change-Id: I389df5c4b073c2c05632ba6b7c95b02a22dfaf98
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235824
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
- exercise different options
- reduce triangle sizes to emphasize overhead (small triangles is also common)
Change-Id: I24ff889cdeeba136349b3a855c6b5881109e2a88
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235461
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Touch the memory that the iterator returns, so we're (slightly) more
sure the compiler isn't eliding code we want to be timing.
Change-Id: I62eb36759413d83fb18f4a6e0bf23d4d98f11999
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/235860
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Old version still exists until client code is migrated.
Change-Id: I087b6b977f586d334f9a20954e7ed7b5e4b7ea5e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/234579
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Mostly use unique_ptr more consistently.
Change-Id: I6e11b272a7904eb662dea59b03fbc309a4cfc25d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233984
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Change-Id: If8a4d3cfdeaef58dd9924af430cfed834519b096
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/232496
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
We special-case unrotated shapes today (drawing rects instead of quads/paths).
This new bench shows that the rotated case is over 4x slow. Probably should
do something about that.
Change-Id: Ie80a42b981a1841f980c70a5f8f8a32357d764b7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233976
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Remove return statements immediately following SK_ABORTs.
Change-Id: I6446b6ba3a6fb272d84ea27f38cf366095cf801d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233565
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Additionally this changes removes the version of the call that that takes
a GrPixelConfig.
As part of this change many call sites that were calling getRTSampleCount
to just check renderability have been changed to call
isFormat[AsColorType]Renderable instead. This change has also started to
move us to just checking format renderability (without GrCT) in classes
that are specifically dealing with GrSurface (GrResourceProvider, GrGpu, etc.).
Bug: skia:6718
Change-Id: Icf4a1a21a81a44e6863a7cd2059d21b9833d581f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/233039
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
2x faster than calling drawVertices as the impl.
Lots more to do in future CLs
- much of the time is spent in malloc, as we cons-up private shaders.
we *could* create a private shader and wack its data for each draw
(breaking the immutable contract, but that may be ok for a raster-only
internal-use shader...)
- also spend time building the pipeline for each draw, even though
all that has changed is a color payload (and the ctm). A custome
stage(s) that exposed its private data could be reused with new
data...
Bug: skia:
Change-Id: I0ff15155e37c0af7931abd34c0883701a47a048a
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203168
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Also refactors 3 duplicate functions that converted an SkTileMode to
a char*. This will rename the matrix convolution benchmarks that used
"clampToBlack" to the more modern "decal" terminology.
Bug: skia:9280
Change-Id: I43a4f9edeba36eb5af1243f7e4ab7647253b91f2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230883
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
We can't remove the loopers themselves, as they are still used
by android and chrome (they just don't ever pass them to skia).
Eventually each of those clients will resolve this, but for now
we just keep the classes (and tests) in skia.
Bug: skia:4783
Change-Id: I5f507e6bb82280f2bc7c0b21eebe59c287aa9265
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230579
Reviewed-by: Florin Malita <fmalita@chromium.org>
Commit-Queue: Mike Reed <reed@google.com>
Bug: skia:
Change-Id: I2ae0caf08f8434302cae8151ae1ea0fda8d56928
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/230397
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
PS2 adds a rewrite for Skia #include <...> to #include "...", letting
them be otherwise rewritten and sorted too. (We do need one exception
for the Vulkan headers, which will otherwise be rewritten to always
point to our own.) I don't think it's particularly important to
favor "" or <>, but picking one keeps things consistent.
PS3 adds a missing SkMutex.h include.
PS4 fixes a terrible readability problem.
Change-Id: Id9fe752727ef30e802b1daf755ee2ed15e267577
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/229742
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Adding cache
Caching shaped results
Base+Index for referencing arrays
The very first and naive version of cache
Cache measurement, lines and picture
Added text blob cache for lines
Removed Run* from Cluster
Removed const char* from Cluster and Run
Few minor changes
Change-Id: I444a1defa950aed5999cfa1c3545fd83ccb54ce9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/227840
Commit-Queue: Julia Lavrova <jlavrova@google.com>
Reviewed-by: Julia Lavrova <jlavrova@google.com>
Reviewed-by: Mike Reed <reed@google.com>
This is a reland of f42de9e1e5
Original change's description:
> Interpreter: Bounds check array access, add bool return from run
>
> Out of bounds access with constant indices is a compile error.
> At runtime, causes the interpreter to fail. Made several other
> conditions trigger the same failure logic, and updated all
> uses of the interpreter to validate success.
>
> Change-Id: I3720b3c83903220b010ec574121fc64dbe102378
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/228256
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
Change-Id: I8849de815f7efb730ac9c55b6edd296cb9ca7599
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/228353
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit f42de9e1e5.
Reason for revert: All the SANs
Original change's description:
> Interpreter: Bounds check array access, add bool return from run
>
> Out of bounds access with constant indices is a compile error.
> At runtime, causes the interpreter to fail. Made several other
> conditions trigger the same failure logic, and updated all
> uses of the interpreter to validate success.
>
> Change-Id: I3720b3c83903220b010ec574121fc64dbe102378
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/228256
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
TBR=mtklein@google.com,brianosman@google.com,ethannicholas@google.com,reed@google.com
Change-Id: I434601960d54fbd7d00e2af2dc6269a83a768c5b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/228352
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Out of bounds access with constant indices is a compile error.
At runtime, causes the interpreter to fail. Made several other
conditions trigger the same failure logic, and updated all
uses of the interpreter to validate success.
Change-Id: I3720b3c83903220b010ec574121fc64dbe102378
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/228256
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Only used in three somewhat dubious places.
Change-Id: I7ccd1aef41f826d0eb62606751f4d3f0ceda267d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/227065
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
N=15 and N=63 make for nice even looking profiles
on ARM and x86 respectively, with N=15 running 3
body loops and 3 tail loops on ARM, N=63 running
7 body loops and 7 tail loops on x86.
Change-Id: Ie7616bd99c949328bbb7d7048fc6f468ff1e3ad2
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/227220
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
These didn't work correctly, and they're extremely tricky to get right
in the vectorized execution model (vs. structured control flow). As a
side effect, determine the maximum stack depth used for the execution
masking - the same idea will be used for the primary stack in a later
CL. Add a unit test to verify the new restriction, and fix two places
that were relying on this feature before.
In addition, boolean external values need to be masks. I may implement
this in the code-gen at some point, but this is already a fringe
feature, so just fix the one unit test for now.
Change-Id: I9607ffaf67c7795dbf42e4009180aea8f3e65c44
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/226849
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
+ fix bug in SkBulkGlyphMetricsAndImages where the underlying SkAutoSTArray
was not reset.
Change-Id: I94882da30e858d012aa02f79c5fdfe4bc7d2e8aa
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/225541
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
config is completely redundant. No caller really cares what the backend
format is.
Change-Id: I93f1feb3ee61db6c21b7915bab3ee3fba5656f92
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/225194
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
I'm kind of getting bored of having to pass --loops 0
in optimized+asserts builds.
We'd been defaulting to 1 loop in Debug and ASAN builds,
and manually setting Valgrind builds to 1 loop with 1
sample. Remove the default so all builds auto-tune,
but set Debug and ASAN bots like Valgrind bots.
Change-Id: Ifedd98a11ea74a2c222fe59bd50b96683d12b98c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/224816
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
There are a few places that have been checking whether the *proxy*
needs stencil, in order to determine if the current render target
context needs stencil. This is problematic since a render target
context can not require stencil itself, but wrap an existing proxy
that already has stencil.
Bug: skia:
Change-Id: I2719dd3a9df15fef3d64f991cda4fadea23266bb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/223970
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Because it mutates the glyph.
Change-Id: Ic7ce320350764454d7a76335828d398f19b149d6
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/223797
Commit-Queue: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This is largely redundant with GrPixelConfig. However, we intend to
remove GrPixelConfig.
Bug: skia:7580
Change-Id: I03d92303be832711f7821f8a97d36387c9b04a9f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222883
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Looks like ~50ns overhead for RP vs ~14,000ns for SkVM.
Change-Id: I85ef73d3387657b14615fcfa5cfd9df5c2325343
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/223302
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Converting to glyph() style calls that return SkGlyph*. This is mainly preparation
for removing converting findImage(const SkGlyph&) to prepareImage(SkGlyph*).
+ Misc cleanups mainly fWidth -> width() type things.
Change-Id: Id5c9b0ba5856b3ea54353ece4d05fa495cc5a640
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/223187
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
From now on, sample counts always refer to the number of actual color
samples, and render targets don't have separate color and stencil
sample counts.
If mixed samples support is available when making a
"GrAAType::kCoverage" draw, then an op may attach and use a mixed
sampled stencil buffer internally. But this will all be invisible to
the client.
After this CL, we temporarily won't have a mode to use nvpr with mixed
samples. That will soon be fixed by a follow-on CL that enables nvpr
with mixed samples in the normal "gl" and "gles" configs.
Bug: skia:
Change-Id: I1cb8277f0d2d0d371f24bb9f39cd473ed5c5c83b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221878
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This new bench lets us measure the overhead of program building,
optimization, and JITting. Surprisingly, at head the optimization in
Builder::done() takes longer than the JIT.
The new bench clocks in around 40µs on my laptop at head,
then 32µs after switching val_to_reg to be an std::vector,
then 27µs after switching deaths to be an std::vector too,
then 22µs after switching fIndex to be an SkTHashMap,
then 20µs after calling program.reserve(fProgram.size()),
then 19µs after switching JIT data maps to SkTHashMap too.
I tried swapping some std::vector for SkTDArray to no benefit, actually
a little detriment. So I think this is roughly all the low-hanging
fruit, with time split now roughly equally between Builder::Done(),
JITting in Program::eval(), and the original calls to Builder
themselves.
Also disable perf dumps on Mac. No real value there until I can dump a
dylib, and it's just one more thing I have to remember to disable before
running this sort of benchmark.
Change-Id: I1c6e58ed00ac94ad622c7d740712634f60787102
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222984
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This moves the responsibility for allocating executable code out of
Assembler. The pages Xbyak uses are obviously executable, so this is
redundant right now, but it'll let us switch to something simple like
std::vector<uint8_t> as we continue to cut out Xbyak.
Make how Program holds its cached JIT program slightly less of a mess.
Change-Id: I38d6f01006da1da60f4aed675e9ddf97de9aec52
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222575
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
- 32x8 i32 add,sub,mul
- add I32_Naive bench/test builder to get better i32 mul coverage
- minor refactoring all over
Change-Id: I13cc19ff37a2da0bcff289ba51baac08f456d6c5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222485
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This extends the runStriped to all for return data.
GPU impl not done yet, will be done in a follow-on CL.
Change-Id: Ib107d2945f6fdb34ce1b5405a6c88a5ae7e9f7ac
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221539
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Reed <reed@google.com>
This reverts commit 59b22f9297.
Reason for revert: ios
Original change's description:
> Reland "Reland "Interpreter: Support striped inputs for less overhead""
>
> This reverts commit 2c59b4e9ea.
>
> Change-Id: I2b06936994430722b8fc3890ff9b4a6f4710db04
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221998
> Reviewed-by: Brian Osman <brianosman@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=mtklein@google.com,brianosman@google.com,reed@google.com
Change-Id: I321d257e400f5df3c6115dfe9aa18a2794a95910
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/222099
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 2c59b4e9ea.
Change-Id: I2b06936994430722b8fc3890ff9b4a6f4710db04
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221998
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit edc42b9971.
Reason for revert: Sigh
Original change's description:
> Revert "Revert "Interpreter: Support striped inputs for less overhead""
>
> This reverts commit 645fe10313.
>
> Change-Id: If74a15479f89f49ac33c0b6241bb0db92bc11083
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221721
> Reviewed-by: Mike Klein <mtklein@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=mtklein@google.com,brianosman@google.com,reed@google.com
Change-Id: I651d56821bbde8b91887aa885bcf2cb202707388
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221897
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 5d89b66ff6.
Reason for revert: Chrome roll
Original change's description:
> Interpreter: Support striped inputs for less overhead
>
> Change-Id: I8c7bd5ed3fb6aebbfb1c5c224acfd73862252621
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220778
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
TBR=mtklein@google.com,brianosman@google.com,ethannicholas@google.com,reed@google.com
Change-Id: I2275e7ed12031e58e59b6618d0ea59bec2ee2815
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221716
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Change-Id: I8c7bd5ed3fb6aebbfb1c5c224acfd73862252621
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220778
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Reed <reed@google.com>
In GrRecordingContext I moved the auditTrail onto the heap and only there
when compiling for tests. This allowed us to move a lot of files out of
include private.
Change-Id: Ib76ac211c0c6fd10bacaccf0c5f93f21a59f35d5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/221344
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Auto-Submit: Greg Daniel <egdaniel@google.com>
Slightly sharper, but far easier to hold:
- Remove Value union from interface, everything is a 32-bit
value type, or a collection thereof.
- Collapse to one version of Run (that takes count), and make
it a member on ByteCode.
- Similarly, move disassemble to ByteCodeFunction.
Change-Id: I07c85e65991178b3f52e20e815c25f36bc9c4257
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/220753
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This converts the SkSL interpreter to operate in SIMT fashion. It handles
all the same features as the previous scalar implementation, but operates
on N lanes at a time. (Currently 8).
It's modeled after GPU and other parallel architectures, using execution
masks to handle control flow, including divergent control-flow.
Change-Id: Ieb38ffe2f55a10f72bdab844c297126fe9bedb6c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217122
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This is a reland of 10ad0b9b01
Original change's description:
> SkParagraph
>
> Change-Id: I0a4be75fd0c18021c201bcc1edfdfad8556edeff
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/192100
> Reviewed-by: Ben Wagner <bungeman@google.com>
> Reviewed-by: Mike Reed <reed@google.com>
> Commit-Queue: Julia Lavrova <jlavrova@google.com>
Change-Id: I46cf43eae693edf68e45345acd0eb39e04e02bfc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/219863
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Julia Lavrova <jlavrova@google.com>
Add MakeWithNoDevice to avoid the threshold of converting to
paths when using MakeCanonicalized.
Change-Id: I73b49dd35ffb2f4fa3b70ba3324bfcb348ca913b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218960
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
SkStrikeSpecStorage was a temporary name until all uses of
SkStrikeSpec were cleaned up. Do the final rename.
Change-Id: Iaba987ecdfe46ca9eee8d530d5095840cdca300d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/219209
Reviewed-by: Herb Derby <herb@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Bug: skia:
Change-Id: I83e3a094d26085fc4d586e5d2581e0d61c55634e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/145080
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Eliminate the duplicate functionality,
and better testing for the bench builders.
Change-Id: If20e52107738903f854aec431416e573d7a7d640
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/218041
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Convert over remaining callsights for strike lookup, and reduce the SkStrikeCache
API.
- one friend decl.
Change-Id: I109a747061030f26ff908472ea55a4424d5c10f1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/209109
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Change-Id: I864d3c2452f3affdc744bf8b11ed3b3e37d6d922
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/216602
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Things were running suspiciously well...
_I32 had a typo that cut out 3/4 of its multiplies...
_I32_SWAR was missing a mask operation needed to drop
the junk low byte of the high half after the multiply.
The bench times now make a bit more sense and are in line
with how much work we're actually doing: F32's the slowest,
I32 a little faster, and I32_SWAR fastest:
curr/maxrss loops min median mean max stddev samples config bench
35/36 MB 58 2.03ns 2.04ns 2.04ns 2.04ns 0% ▂▂▂▂▁▁█▁▂▁ nonrendering SkVM_4096_I32_SWAR
35/36 MB 42 3.44ns 3.48ns 3.49ns 3.59ns 1% ▂▆▅█▃▃▁▂▂▄ nonrendering SkVM_4096_I32
35/36 MB 30 4.9ns 5.21ns 5.11ns 5.33ns 3% ▆▇█▆▆▁▂▁▁▅ nonrendering SkVM_4096_F32
35/36 MB 203 0.696ns 0.697ns 0.705ns 0.758ns 3% █▂▂▁▁▁▁▁▁▂ nonrendering SkVM_4096_RP
35/36 MB 942 0.188ns 0.188ns 0.188ns 0.189ns 0% ▂▁▂▁▃█▂▁▁▁ nonrendering SkVM_4096_Opts
Change-Id: I2850dc3f9df1828f03499eb278b8231f48eaae63
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217982
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
With all the thinking around a stack-based interpreter,
I figured I'd sketch out some ideas for a register VM too.
I kind of have the hunch that this is the direction that
will actually let us replace large amounts of Skia's CPU
backend with an efficient interpreter or JIT.
Change-Id: Ia2b5ba4a3fc27556f5b6ba95cd1ace46d3217403
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/216665
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Bug: skia:
Change-Id: I8497ddbc5c5fef4e0fa87f3b9828034ba34284cc
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217636
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Ethan Nicholas <ethannicholas@google.com>
This lets you write a suite of benchmarks that
run against different sized workloads and see
numbers that normalized by that workload size,
e.g. nanoseconds / pixel.
C.f. the bench in "sketch an skvm".
Change-Id: I6106c51ceac59cd533449712a77c957bdf86846e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217416
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is a reland of a36e089065
This is only active when Metal is enabled.
Original change's description:
> Added AutoreleasePool for managing pool memory in testing apps.
>
> This is only active on MacOS and iOS -- on other platforms it
> will do nothing as they have no need for autorelease pools.
>
> Bug: skia:8243
> Change-Id: Ib74968dab6e3455a72e726429832101d0d410076
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217126
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:8243
Change-Id: I743a3dcc93b46387a6a330e855c2e8810b482544
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217379
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit a36e089065.
Reason for revert: Primary suspect in breaking G3
Original change's description:
> Added AutoreleasePool for managing pool memory in testing apps.
>
> This is only active on MacOS and iOS -- on other platforms it
> will do nothing as they have no need for autorelease pools.
>
> Bug: skia:8243
> Change-Id: Ib74968dab6e3455a72e726429832101d0d410076
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217126
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
TBR=egdaniel@google.com,jvanverth@google.com,brianosman@google.com
Change-Id: I64f6e0baba21a9d35682ab53bdf418180be8579b
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:8243
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217377
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Kevin Lubick <kjlubick@google.com>
This is only active on MacOS and iOS -- on other platforms it
will do nothing as they have no need for autorelease pools.
Bug: skia:8243
Change-Id: Ib74968dab6e3455a72e726429832101d0d410076
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/217126
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Also some minor refactoring in make_image_shader().
Change-Id: I6061ebeb8c297045b1a276160fe18cc6ae54bde7
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/216867
Commit-Queue: Hal Canary <halcanary@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
This file pulls in Windows headers in a custom way, which is somewhat
awkward for a library header. The only use in include/ has been replaced
with a single forward declaration.
Change-Id: Ibef4cf7a2d1c9957a6a5b145b95aca1a6868cb5e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/214689
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Previous structure didn't measure anything but new/free cost. All of the
constructs turned into (eventually) drawRect + color.
New version also measures that, but in a clearer way, so we can examine
all the variants, and assume that they should all be about the same.
Change-Id: I1b4a0120a3e663ce1b9daa3c1e3e26ae6b397677
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/214687
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
It's been dead code since it was inlined into Android last summer.
Change-Id: I252f6392d9436ef357f22a54bab8a33c9d1b3ea9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/213625
Reviewed-by: Derek Sollenberger <djsollen@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
... but keep the apis for now
Bug: skia:4872
Bug: skia:9012
Change-Id: I3a9b0c9194be6897c0e59b7edd972b7218168183
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/211343
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
Current strategy: everything from the top
Things to look at first are the manual changes:
- added tools/rewrite_includes.py
- removed -Idirectives from BUILD.gn
- various compile.sh simplifications
- tweak tools/embed_resources.py
- update gn/find_headers.py to write paths from the top
- update gn/gn_to_bp.py SkUserConfig.h layout
so that #include "include/config/SkUserConfig.h" always
gets the header we want.
No-Presubmit: true
Change-Id: I73a4b181654e0e38d229bc456c0d0854bae3363e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/209706
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Hal Canary <halcanary@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
Change-Id: I73de5cb894e4084ca86e43c2918a1a9fe656b11d
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/209323
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This is a reland of fde841de44
Original change's description:
> Simplify SkTypeface::charsToGlyphs API to require UTF32 input
>
> Change-Id: I486713c496c40103eef13fa6068ac4d69e32f606
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/207865
> Commit-Queue: Ben Wagner <bungeman@google.com>
> Reviewed-by: Ben Wagner <bungeman@google.com>
Change-Id: I5162c93b3ea6146d09334545744b791d993397b8
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/208679
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
This reverts commit fde841de44.
Reason for revert: used in headless on google3, need to add a guard
Original change's description:
> Simplify SkTypeface::charsToGlyphs API to require UTF32 input
>
> Change-Id: I486713c496c40103eef13fa6068ac4d69e32f606
> Reviewed-on: https://skia-review.googlesource.com/c/skia/+/207865
> Commit-Queue: Ben Wagner <bungeman@google.com>
> Reviewed-by: Ben Wagner <bungeman@google.com>
TBR=bungeman@google.com,herb@google.com,reed@google.com
Change-Id: I1d28ed5c31deaa76aa3c4b627454b0ad3356a6fc
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/208800
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Made up a threshold between linear and slope searching.
For a count of 100 here are the before and after timings.
The first two lines are being changed. The latter 2 are
the native look-ups for mac.
Before
15/15 MB 115 2.33µs 2.34µs 2.34µs 2.34µs 0% ▆▁▄█▇▇▂▄█▆ nonrendering cmap_findcache_charToGlyph
15/15 MB 66 3.47µs 3.48µs 3.49µs 3.55µs 1% █▁▁▁▂▁▁▁▁▄ nonrendering cmap_addcache_charToGlyph
15/15 MB 1 1.1µs 1.13µs 1.21µs 1.98µs 22% █▂▁▁▁▁▁▁▁▂ nonrendering cmap_face_charToGlyph
15/15 MB 190 1.09µs 1.1µs 1.19µs 1.64µs 17% ▁▁▁▆█▁▁▁▁▁ nonrendering cmap_font_charToGlyph
After
15/15 MB 447 448ns 449ns 448ns 449ns 0% ▂▅█▅▁▆█▂▁▆ nonrendering cmap_findcache_charToGlyph
15/15 MB 95 2.79µs 3.03µs 3µs 3.06µs 3% ▇▇▇▇▇███▄▁ nonrendering cmap_addcache_charToGlyph
15/15 MB 1 1.15µs 1.16µs 1.25µs 1.99µs 21% █▂▁▁▁▁▁▁▁▁ nonrendering cmap_face_charToGlyph
15/15 MB 186 1.09µs 1.1µs 1.12µs 1.27µs 5% █▁▁▁▂▁▁▁▁▁ nonrendering cmap_font_charToGlyph
Bug: skia:
Change-Id: If7da4eef3cce248393815071f342607f0c8140bb
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/208044
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Try: out/release/nanobench --match _charToGlyph
Pseudo plan to use this:
- attach to whatever typeface backends need it (probably just freetype)
- have a purge/limiting scheme (e.g. only cache N entries)
- if we care, make the search fancier (e.g. binary, slope, etc.)
Bug: 951647
Change-Id: Ib1042ca5891d2742499faf1314579c402121a855
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/207703
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Idea: transition callers to this, so we can later typedef SkColorFilter
and SkShader to the same thing.
Bug: skia:8937
Change-Id: I000c882e11622091aa44c141aa6ddd1216414f46
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/206685
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Change-Id: I9eb9095131adb5862d286b211501bf194ef8e91e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/205822
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
- move shader factories to their host (e.g. picture->makeShader)
More to do to formally deprecated SkShader::TileMode
Bug: skia:8937
Change-Id: I101e42fb9fba4ab91d028a34888f1fde16fdece4
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/205589
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
This differed from the separate versions in that it snapped to zero.
It was also strictly worse than calling the two separate versions.
Most clients don't need the snapping, so just call the two existing
functions. For clients that need the snapping, call new variants of
each that do snap.
Change-Id: Ia4e09fd9651932fe15caeab1399df7f6281bdc17
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/205303
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Bug: skia:8929
Cq-Include-Trybots: skia.primary:Perf-Android-Clang-Nexus7-CPU-Tegra3-arm-Debug-All-Android,Perf-Android-Clang-Nexus7-CPU-Tegra3-arm-Release-All-Android
Change-Id: Id544cd60bfd05a35766338645bb4f48411a227c5
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/204413
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Stan Iliev <stani@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
We only care about two things: RT binds and shader compiles. RT binds
should be constant frame-to-frame, and shader compiles should always be
zero on frame 2, so just measure on frame 1.
Bug: skia:
Change-Id: I4defa0a6dc79413b375ec60b5024fa57e768b127
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203391
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Turns out lots of tools had two copies of many of these flags.
Some GN and .cpp file refactoring to make sure when flags are
present in a binary, they do something in that binary.
I think this finally finishes the flag refrag.
Change-Id: I01488e37ab73a5c4361786863ddb137a7f1095b1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203420
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
These are only used by DM and nanobench,
and sometimes even do substantially different things...
Change-Id: I973f3938fbae1fd1b19d876fa6a90122fc55d48c
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203167
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I00c86a99d3785eec67d9cc7dde31a7705e7d78cd
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203169
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Reed <reed@google.com>
In the end only DM and skia_test really use it.
- nanobench used --veryVerbose in a silly superficial way
- gm/fontmgr.cpp is probably clearer using its own flag
- the change to StrokerTest should be a near noop...
reporter->verbose() is set by --veryVerbose in both
DM and skia_test.cpp. One of the checks tested
FLAGS_verbose, but I feel like that was probably a typo.
Change-Id: I2601d243b8200b3bb7a16478dfbce14001c4a191
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203180
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This wraps up the behavior for --analyticAA and --forceAnalyticAA
in one place, like we've done for the various GPU flags covered by
SetCtxOptionsFromCommonFlags().
It seems at least midly useful to have common flags centralized when
there is really a common mechanism they control. Most of the rest
of these flags only serve analogous purposes in the various binaries
that use them, and I think it might be better for them to be split
out rather than centralized (so they don't show up confusingly in
binaries that _don't_ use them).
Change-Id: I27dbe53586363d4b262c1679ea73138015811ed1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203095
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This scopes a bunch of flags more tightly
to SetCtxOptionsFromCommonFlags().
Change-Id: I6090a016880c085fb5405a45081c0af984a1cd5b
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203094
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Change-Id: I1fd8cba067c0063c6621641e8196e69fd5e31cec
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/203080
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Move flags used only in one place to that place,
and remove a couple unused flags.
Change-Id: I0504d9583d464377e84ab28ce378d6da1e99ac3e
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/202802
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
There's really no big benefit to distinguishing these.
Change-Id: Ib329d32b1fc43e98ba40658cfea37261203ecdb9
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/202801
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
- SkColorSpaceXformer
- makeColorSpace on SkShader, SkColorFilter,
SkImageFilter, SkDrawLooper, and SkLights
- DM support and some bot configs
Bug: skia:8773
Change-Id: I16ef8f487de6c35329b3b0474c1d66d7fa0a6220
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/202430
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Like any normal variable, flags can be made file-scoped static,
and like any normal variable, mostly they should be if they can.
This CL converts most flags to be static, if only so that the
ones that do cross files stand out more clearly, and so that
there's more examples of static flags through the codebase for
people to ape.
Change-Id: Ibb5ddd7aa09fce073d0996ac3ef0487b078b7d79
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/202800
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Kept it on SkDebugfTracer, which seemed to parse as "SkDebugf, Tracer".
Change-Id: I3e43fe101798ca5ffe14324e3c29f2dd41a6bd0f
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/202317
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
sk_tool_utils doesn't really fit the naming convention
the rest of code under tools/ tends to use.
Change-Id: I45326a174101c6eb4b6149e9c742f658f2fd23b1
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/202313
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
The command line flag package is tool-only, not part of Skia per se,
and does not need an Sk prefix to avoid naming conflicts.
And git clang-format.
Change-Id: Ida8477779e51750ed0475590ed2454841b23d6ea
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/202307
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Previously, we relied on ops to deduce whether a draw would have
hardware coverage modulation as a result mixed samples. This is
problematic because *any* draw can have mixed samples coverage if
there is a multisampled stencil clip. No ops were checking for stencil
clip, and most just said they never used mixed samples.
Now that the only usecase for mixed samples is the stencil buffer,
this CL makes the processorSet automatically deduce mixed samples
coverage from the stencil settings and fsaaType.
Bug: skia:
Change-Id: Ib69b84bc03b12f6efb8e7d6ed721ae1612785315
Reviewed-on: https://skia-review.googlesource.com/c/skia/+/197281
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This is a reland of dfe5000a5f
Original change's description:
> Stack-allocate pipelines for GrMeshDrawOp
>
> Stack-allocates the pipelines in onExecute. This saves us from having
> to store the pipelines on the heap, as well as delaying the need to
> detach processors until onExecute. The delay is an improvement because
> it allows us to keep visiting proxies after onPrepare. (Previously,
> they were moved out of GrProcessorSet and into a pipeline during
> onPrepare, so visiting proxies was impossible after that point.)
>
> Bug: skia:8731
> Change-Id: Idc05063fb0dfbfed42b434e429fa5a497097bdae
> Reviewed-on: https://skia-review.googlesource.com/c/193368
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com
Bug: skia:8731
Change-Id: I32def1a35bb0593470fa672691a9e697dc6d9680
Reviewed-on: https://skia-review.googlesource.com/c/195261
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
This reverts commit dfe5000a5f.
Reason for revert: HWAA pipeline flag not getting set for dashing.
Original change's description:
> Stack-allocate pipelines for GrMeshDrawOp
>
> Stack-allocates the pipelines in onExecute. This saves us from having
> to store the pipelines on the heap, as well as delaying the need to
> detach processors until onExecute. The delay is an improvement because
> it allows us to keep visiting proxies after onPrepare. (Previously,
> they were moved out of GrProcessorSet and into a pipeline during
> onPrepare, so visiting proxies was impossible after that point.)
>
> Bug: skia:8731
> Change-Id: Idc05063fb0dfbfed42b434e429fa5a497097bdae
> Reviewed-on: https://skia-review.googlesource.com/c/193368
> Commit-Queue: Chris Dalton <csmartdalton@google.com>
> Reviewed-by: Robert Phillips <robertphillips@google.com>
TBR=robertphillips@google.com,csmartdalton@google.com
Change-Id: If706f19423310846de70288f393ac12f17ffeee5
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:8731
Reviewed-on: https://skia-review.googlesource.com/c/195161
Reviewed-by: Chris Dalton <csmartdalton@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Stack-allocates the pipelines in onExecute. This saves us from having
to store the pipelines on the heap, as well as delaying the need to
detach processors until onExecute. The delay is an improvement because
it allows us to keep visiting proxies after onPrepare. (Previously,
they were moved out of GrProcessorSet and into a pipeline during
onPrepare, so visiting proxies was impossible after that point.)
Bug: skia:8731
Change-Id: Idc05063fb0dfbfed42b434e429fa5a497097bdae
Reviewed-on: https://skia-review.googlesource.com/c/193368
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
We switch to FILTER_HEIGHT_SMALL when fIsSmall.
Change-Id: I5d21eacbee29a349caa96815b2059c0bebd819e2
Reviewed-on: https://skia-review.googlesource.com/c/190563
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Centralize these for my sanity. Most will also be parceled out to other contexts.
Change-Id: If0e7e98bcf66c4d8a3391f9b04e643ccc91af4ad
Reviewed-on: https://skia-review.googlesource.com/c/189488
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Mechanical. This makes the priv() accessor the same for all the context types.
Change-Id: I40850eb05a33b8d7cc3eabdd42226d24b2ba58aa
Reviewed-on: https://skia-review.googlesource.com/c/189164
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
* Remove GetTypefaceOrDefault from SkPaint and SkFont
* Remove RefTypefaceOrDefault from SkPaint and SkFont
Change-Id: I04ae777142c2bdec849508b611b844418bbaedff
Reviewed-on: https://skia-review.googlesource.com/c/185781
Reviewed-by: Mike Reed <reed@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
A later CL will make this return a unique_ptr<SkDocument>.
Bug: skia:5972
Change-Id: Ie10d6c07d5f2524ecb71d906db0d37427827225d
Reviewed-on: https://skia-review.googlesource.com/c/181660
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
This is a different way of fixing the clear benchmark measurements,
since https://skia-review.googlesource.com/c/skia/+/184064 seemed to
cause device issues on several bots.
Instead of forcing a flush, this takes extra steps to prevent the clear
ops from batching in Ganesh, and from resetting the op list, which has
the same effect of ensuring "loop" count clears are actually sent to
the GPU.
Bug: skia:
Change-Id: Id7f58894f42ca55a6cb663b65c27901d65432f82
Reviewed-on: https://skia-review.googlesource.com/c/184384
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Michael Ludwig <michaelludwig@google.com>
This reverts commit 75294fe3e8.
Reason for revert: nanobench hangs on Perf-Win10-Clang-NUC6i5SYK-GPU-IntelIris540-x86_64-Release-All
Original change's description:
> Force flush in clear benchmarks
>
> Bug: skia:
> Change-Id: I9d373dbcf78c6fe52f74deb37d8e08595d3a7c28
> Reviewed-on: https://skia-review.googlesource.com/c/184064
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Michael Ludwig <michaelludwig@google.com>
TBR=bsalomon@google.com,michaelludwig@google.com
Change-Id: I6eba0057bff7399023f6324a79b80b93ff087eb0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/c/184193
Reviewed-by: Michael Ludwig <michaelludwig@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Bug: skia:
Change-Id: I9d373dbcf78c6fe52f74deb37d8e08595d3a7c28
Reviewed-on: https://skia-review.googlesource.com/c/184064
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Change-Id: I63cf5ff9572bbe0594f3aa02a9b64e94c3849fc2
Reviewed-on: https://skia-review.googlesource.com/c/183980
Commit-Queue: Hal Canary <halcanary@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
I think we originally added this for the bots, back in the good old days
when the bot scripts weren't versioned with Skia. No bots use this now.
Change-Id: Icdee95d27fb928d0215601e082d056e611eb6202
Reviewed-on: https://skia-review.googlesource.com/c/181980
Reviewed-by: Ben Wagner <benjaminwagner@google.com>
Commit-Queue: Ben Wagner <benjaminwagner@google.com>
Moved named common transfer functions and gamuts to constexpr values in
SkColorSpace.h, in SkNamedTransferFn and SkNamedGamut namespaces.
Converted nearly all SkColorSpace::MakeRGB calls within Skia to use the
new factory with the named values. Multiple clients want a way to
extract named transfer function and gamut - this still doesn't provide
that, but this may be a better path forward for honestly advertising how
SkColorSpace works internally.
Originally landed as:
https://skia.googlesource.com/skia/+/a9549ab31630fc244094e6f1692371cbaf87f666
Re-landing with a new serialization format, but maintaining ability to
load old serialized color spaces, for SKP compatibility.
Bug: skia:
Change-Id: Ib84a6e1cd5d7d9816175773fdbaff2ca32658667
Reviewed-on: https://skia-review.googlesource.com/c/181176
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit a9549ab316.
Reason for revert: SKPs changed?
Original change's description:
> Add SkColorSpace factory from 3x3 row-major gamut and transfer function
>
> Moved named common transfer functions and gamuts to constexpr values in
> SkColorSpace.h, in SkNamedTransferFn and SkNamedGamut namespaces.
>
> Converted nearly all SkColorSpace::MakeRGB calls within Skia to use the
> new factory with the named values. Multiple clients want a way to
> extract named transfer function and gamut - this still doesn't provide
> that, but this may be a better path forward for honestly advertising how
> SkColorSpace works internally.
>
> Bug: skia:
> Change-Id: I9296d67e8f0dab5ceb49869cb3ba24e98a05f3c4
> Reviewed-on: https://skia-review.googlesource.com/c/180360
> Reviewed-by: Mike Klein <mtklein@google.com>
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=mtklein@google.com,brianosman@google.com,reed@google.com
Change-Id: Ie888f877b3c1dba33e1a8c0f5fa92594628de7fb
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/c/181300
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Moved named common transfer functions and gamuts to constexpr values in
SkColorSpace.h, in SkNamedTransferFn and SkNamedGamut namespaces.
Converted nearly all SkColorSpace::MakeRGB calls within Skia to use the
new factory with the named values. Multiple clients want a way to
extract named transfer function and gamut - this still doesn't provide
that, but this may be a better path forward for honestly advertising how
SkColorSpace works internally.
Bug: skia:
Change-Id: I9296d67e8f0dab5ceb49869cb3ba24e98a05f3c4
Reviewed-on: https://skia-review.googlesource.com/c/180360
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Skia can now build if we mark drawPosText as private,
Will hide/remove next (after Chrome CL)
Bug: skia:
Change-Id: I156560b025c119af302545bb5bd60678f7b8e8f7
Reviewed-on: https://skia-review.googlesource.com/c/179985
Reviewed-by: Mike Reed <reed@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Auto-Submit: Mike Reed <reed@google.com>
All PDF Streams are immediatly serialized, and are never long-lived
in memory.
if EXPERIMENTAL fExecutor is set on the Document, streams are
compressed in parallel.
Results for PDFBigDocBench:
without patch 1807885.01 μs
with patch without executor 1802808.35 μs
with patch with executor 246313.72 μs
SkPDFStreamOut() function replaces SkPDFStream classes.
Page resources are all serialized early.
Several Document-level objects are serialzied early.
SkUUID introduced as top-level object.
Many {insert|append}ObjRef() converted to memory efficient
{insert|append}Ref().
Bug: skia:8630
Change-Id: Ic336917d0c8b9ac1c2423b43bfe9b49a3533fbff
Reviewed-on: https://skia-review.googlesource.com/c/176588
Auto-Submit: Hal Canary <halcanary@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
Bug: skia:
Change-Id: I5bd0194a49c74a8e47a210ff06ef4406ecb3bc4c
Reviewed-on: https://skia-review.googlesource.com/c/175585
Commit-Queue: Mike Reed <reed@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Change-Id: I4960b1cd055daf44637e95825f82cb7fe2ce134a
Reviewed-on: https://skia-review.googlesource.com/c/174285
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
-- lots more where this came from
Bug: skia:2664
Change-Id: I8bb47f02c156b0b88fbb92fec73af0eb6641b1bf
Reviewed-on: https://skia-review.googlesource.com/c/173769
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Reed <reed@google.com>
Bug: skia:7523
Change-Id: I7d48e5f5930b413fa7f27aa391bf92c5af1342e9
Reviewed-on: https://skia-review.googlesource.com/c/173429
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
Bug: skia:
Change-Id: Iaa2971c28f6a8e869b92887e0c0595c73b0aebdb
Reviewed-on: https://skia-review.googlesource.com/c/173225
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Bug: skia:
Change-Id: Ib3309ec0a0a00f1471c2211282d70ab089143bb2
Reviewed-on: https://skia-review.googlesource.com/c/171727
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Bug: skia:
Change-Id: I3a23031cdd86d844c78134ecf79fc1ccc37ec1f1
Reviewed-on: https://skia-review.googlesource.com/c/171721
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Replacement for SkPaint::getTextPath and getPosTextPath
- only works with glyphIDs
- doesn't try to do positioning
- doesn't force caller to consolidate all the glyphs into one giant path
Much of the time is spent transforming the path from the cache's size to the callers.
Might consider passing the raw path + matrix rather than scaling it for them???
Bug: skia:
Change-Id: Ie13015c61ebe410eaec084282d600338cfccb51a
Reviewed-on: https://skia-review.googlesource.com/c/170881
Reviewed-by: Ben Wagner <bungeman@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Mike Reed <reed@google.com>
Adds setVertexAttributes and setInstanceAttributes. These take a pointer
to the first attribute, and a count. The count is the total number of
possible attributes, though some may not be initialized. The base class
computes the number of initialized attributes, pre-computes the strides,
and only allows subsequent access to the initialized attributes.
The attributes need to be allocated contiguously. Some GPs place them in
an array, though most just place them as consecutive members, and pass
a pointer to the first one.
Indexed access would be possible, but now it makes more sense to iterate
over all attributes, so enable that, and use range-based for everywhere.
Completely remove the per-attribute offset helper (again - possible, but
not real helpful), and make the stride always available. In many ops,
just use the GP's computed stride, rather than re-computing it.
Bug: skia:
Change-Id: Ie4cccb7969a98ee5a10b373e714fbd702e875b3e
Reviewed-on: https://skia-review.googlesource.com/c/169241
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This is a reland of b07aba4214
Original change's description:
> Move remove ptr args to MakeRecAndEffects
>
> Move this conversion out through the transitive closure of calls. As you
> move up the stack, everything becomes refs instread of pointers.
>
> Reorder args of MakeRecAndEffects and setupCache to match the majority of other
> calls.
>
> Change-Id: I72baf457cd9140f76ee5f7122493284c4be5bcd0
> Reviewed-on: https://skia-review.googlesource.com/c/169765
> Reviewed-by: Ben Wagner <bungeman@google.com>
> Commit-Queue: Herb Derby <herb@google.com>
Change-Id: I2ff7f218ecc7b18ae6a2b293cecdb059eea77562
Reviewed-on: https://skia-review.googlesource.com/c/170222
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This reverts commit b07aba4214.
Reason for revert: Changes GMs
Original change's description:
> Move remove ptr args to MakeRecAndEffects
>
> Move this conversion out through the transitive closure of calls. As you
> move up the stack, everything becomes refs instread of pointers.
>
> Reorder args of MakeRecAndEffects and setupCache to match the majority of other
> calls.
>
> Change-Id: I72baf457cd9140f76ee5f7122493284c4be5bcd0
> Reviewed-on: https://skia-review.googlesource.com/c/169765
> Reviewed-by: Ben Wagner <bungeman@google.com>
> Commit-Queue: Herb Derby <herb@google.com>
TBR=bungeman@google.com,herb@google.com
Change-Id: I29e54cea5b7b5709dd6db6816cb6556d73e003e0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/c/170221
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Move this conversion out through the transitive closure of calls. As you
move up the stack, everything becomes refs instread of pointers.
Reorder args of MakeRecAndEffects and setupCache to match the majority of other
calls.
Change-Id: I72baf457cd9140f76ee5f7122493284c4be5bcd0
Reviewed-on: https://skia-review.googlesource.com/c/169765
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
This reverts commit 51b1c12bbc.
Reason for revert: reverting till flutter gets to 1.1 to fix build issues.
Original change's description:
> Have a GrBackendFormat be stored on gpu proxies.
>
> Bug: skia:
> Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
> Reviewed-on: https://skia-review.googlesource.com/c/168021
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,brianosman@google.com
Change-Id: I574fdc084ef5994596c51fb0d60423b5dc01b885
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:903701 chromium:903756
Reviewed-on: https://skia-review.googlesource.com/c/169835
Commit-Queue: Greg Daniel <egdaniel@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
Bug: skia:
Change-Id: Iaf1fb24ab29a61d44e5fa59a5e0867ed02dcda90
Reviewed-on: https://skia-review.googlesource.com/c/168021
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
We're going to use half-floats, which are far more future-proof.
Bug: skia:
Change-Id: I6e098017381256d6e750ac546c353072802282cb
Reviewed-on: https://skia-review.googlesource.com/c/165522
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Gradient code still uses some of the helpers, otherwise they could
be moved to SkColor.cpp.
Bug: skia:
Change-Id: I2e5076e9cc81669440fbf29a95113e45642b307f
Reviewed-on: https://skia-review.googlesource.com/c/165307
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Originally I wanted to get it away from using from_srgb/to_srgb
directly, but in the end I just don't care about any of it.
Change-Id: I7ed39a92840f02c98bfe97203bef64057ee0413e
Reviewed-on: https://skia-review.googlesource.com/c/165440
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Bug: skia:
Change-Id: I91b9816aae74726762c123d9f3454c5961382b7b
Reviewed-on: https://skia-review.googlesource.com/c/164680
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
The distinction between SkJumper and SkRasterPipeline used
to be important, but it's no longer. This CL moves everything
under src/jumper to the appropriate SkRasterPipeline file.
Change-Id: I1181fffafccb3dc4c4eb5f33b442c719ee370462
Reviewed-on: https://skia-review.googlesource.com/c/164627
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Same deal as before, just swap_rb where needed.
The change to SkWebpCodec could probably land independently if we want.
Change-Id: Idd53ab76232cb95eb2f41cd65c6903fa7c5b01d6
Reviewed-on: https://skia-review.googlesource.com/c/163440
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
We only need to decode the source file once, not multiple times.
Bug: skia:
Change-Id: I1067eac6b7acc482f97fb1835c1c219d21cc37e9
Reviewed-on: https://skia-review.googlesource.com/c/163300
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Dropping the "r" makes it consistent with both the class name and
Benchmark::getName.
Bug: skia:
Change-Id: I17bcf699d162c678daabf92b4e39b7230428b98b
Reviewed-on: https://skia-review.googlesource.com/c/163280
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
This adds SkPMColor4f conversions to/from RGBA bytes (ie GrColor).
I had previously made some free functions that did the same thing.
I'm ambivalent about which option is nicer, but wanted to have one
method, so I converted everything to use the new versions.
Bug: skia:
Change-Id: I4194c44b5bd12228075fd1932a14cf31c8d6a3c1
Reviewed-on: https://skia-review.googlesource.com/c/162560
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: I2cfc365e41942ad7cc3fbdf9b815df6e25b1f36f
Reviewed-on: https://skia-review.googlesource.com/c/160601
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Michael Ludwig <michaelludwig@google.com>
Coping paints take significant time. The ApplyFontToPaint
idiom requires a copy and a dtor. This CL keeps the paint and
font in parallel through the code until a paint is actually
needed, then a special ctor is used to create it.
Also, inline a bunch of text blob calls that were showing up
in perf.
Change-Id: I7da746a287e4d3942e45e9536ef9acdc64f084d4
Reviewed-on: https://skia-review.googlesource.com/c/159222
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Commit-Queue: Herb Derby <herb@google.com>
It's been driving me nuts that I can't just write `SkMatrix44 m;`,
and I often don't care whether it's initialized or not. The default
identity constructor would be nice to use, but it's deprecated.
By tagging this constructor deprecated, we're only hurting ourselves;
our big clients disable warnings about deprecated routines and use it
freely.
A quick tally in Skia shows we mostly use the uninitialized constructor,
but sometimes the identity constructor, and there is a spread of all
three in Chromium. So I've left the two explicit calls available.
I switched a bunch of calls in Skia to use the less verbose constructor
where it was clear that it didn't matter if the matrix was initialized.
Literally zero of the kUninitialized constructor calls looked important
for performance, so the only place I've kept is its lone unit test.
A few places read clearer with an explicit "identity" to read.
Change-Id: I0573cb6201f5a36f3b43070fb111f7d9af92736f
Reviewed-on: https://skia-review.googlesource.com/c/159480
Reviewed-by: Brian Osman <brianosman@google.com>
Bug: skia:
Change-Id: Ie59aace6ba7ca3685d481fcb3af508629c56f0c3
Reviewed-on: https://skia-review.googlesource.com/157742
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
I keep seeing it show up on the profile(usually under memmove) of tight
benchmarks and it's kind of distracting. We don't even print it when
we pass --quiet, so that seems like a nice way to stifle it.
Change-Id: I3a67a7ca1758fd35e3b63cfeeddeac4ff1ffe38d
Reviewed-on: https://skia-review.googlesource.com/157520
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
- gammaencodedpremul GM was just demonstrating something that we
understand well (and have much better testing for).
- readpixels GM was filled with workarounds for things that are no
longer true (unpremul images, clamped F16).
- Other uses can be switched to SkConvertPixels trivially.
- Remove SkColorSpaceXformPriv and SkColorLookUpTable, all unused.
- Remove SkColorSpaceXform_skcms.cpp, no longer referenced by clients.
Bug: skia:
Change-Id: I7298bb53aa61b49ad1398ebc504d35c119fd5cf4
Reviewed-on: https://skia-review.googlesource.com/157153
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This is a reland of f3ebd312f2
PS 2: use faster half->float routine
PS 3: relax tolerance to 2^-10 for half, keeping others 2^-12
Original change's description:
> add getAlphaf() to pixmap/bitmap
>
> Convenient for just extracting alpha (and more efficient than getColor()) and
> works for super-normal formats w/o loss of precision.
>
> Somewhat inspired by examining multiple chrome call-sites for getColor(), where
> chrome only really cared about the alpha. This new method runs about twice
> as fast as getColor() for the simple cases (i.e. no colorspace xforms), and
> even faster in the complex cases (since retrieving alpha doesn't care about
> colorspaces).
>
> Bug: skia:
> Change-Id: I7cd5a2c7f78de781aaa69dd1aa0dba3c532fcb73
> Reviewed-on: https://skia-review.googlesource.com/155606
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
Cq-Include-Trybots: skia.primary:Test-Android-Clang-Nexus7-CPU-Tegra3-arm-Debug-All-Android,Test-Debian9-Clang-GCE-CPU-AVX2-x86_64-Release-All-SK_CPU_LIMIT_SSE2,Test-Debian9-GCC-GCE-CPU-AVX2-x86_64-Release-All,Test-Win2016-MSVC-GCE-CPU-AVX2-x86_64-Release-All,Test-Win8-Clang-Golo-CPU-AVX-x86_64-Debug-All
Bug: skia:
Change-Id: Ie94e5c89e185fde12cbd6c56ed4026c4dc5a1623
Reviewed-on: https://skia-review.googlesource.com/156242
Commit-Queue: Ravi Mistry <rmistry@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Nothing's using it except test tools.
I'd like to make that a bit clearer by getting it out of src.
Disabled the fuzzer.
Removed the bench so Android's building nanobench doesn't block this.
Bug: chromium:886713
Change-Id: I761f52c40171c27ff4b699409b32647e84684ec3
Reviewed-on: https://skia-review.googlesource.com/156240
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
This is a reland of 6d0e566e94
On second thought, it's probably better to correct the
types of the swizzle functions to express their required alignment.
This is a more involved CL, but I think leaves things better off.
Original change's description:
> have SkConvertPixels use SkColorSpaceXformSteps
>
> This ought to allow the fast paths in more cases, e.g. memcpy() when
> both src and dst are the same format. Today if we tag a dst color space
> at all, we'll think we need to fall back to the general case pipeline.
>
> Some refactoring too, but no big functional change beyond using steps.
>
> Change-Id: I8fa01025229e3b9418e7f43241a2f03628a97288
> Reviewed-on: https://skia-review.googlesource.com/155640
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Mike Klein <mtklein@google.com>
Change-Id: Ia17d93acfe88a36c4c36d29e3a0b243f91178b61
Reviewed-on: https://skia-review.googlesource.com/156241
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit f3ebd312f2.
Reason for revert: unhappy bots
Original change's description:
> add getAlphaf() to pixmap/bitmap
>
> Convenient for just extracting alpha (and more efficient than getColor()) and
> works for super-normal formats w/o loss of precision.
>
> Somewhat inspired by examining multiple chrome call-sites for getColor(), where
> chrome only really cared about the alpha. This new method runs about twice
> as fast as getColor() for the simple cases (i.e. no colorspace xforms), and
> even faster in the complex cases (since retrieving alpha doesn't care about
> colorspaces).
>
> Bug: skia:
> Change-Id: I7cd5a2c7f78de781aaa69dd1aa0dba3c532fcb73
> Reviewed-on: https://skia-review.googlesource.com/155606
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,reed@google.com
Change-Id: I82ce00c09d16bf3e9b04f1c1bccd8cc6aa706ab2
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/156000
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Robert Phillips <robertphillips@google.com>
Convenient for just extracting alpha (and more efficient than getColor()) and
works for super-normal formats w/o loss of precision.
Somewhat inspired by examining multiple chrome call-sites for getColor(), where
chrome only really cared about the alpha. This new method runs about twice
as fast as getColor() for the simple cases (i.e. no colorspace xforms), and
even faster in the complex cases (since retrieving alpha doesn't care about
colorspaces).
Bug: skia:
Change-Id: I7cd5a2c7f78de781aaa69dd1aa0dba3c532fcb73
Reviewed-on: https://skia-review.googlesource.com/155606
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Bug: skia:
Change-Id: I62f02a122b431e6c9a866e80c441f3e18b1e69fb
Reviewed-on: https://skia-review.googlesource.com/155842
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit 90d2d9381e.
Updated to use float in the shader (many ES2 implementations
don't support integral types as attributes).
Bug: skia:
Change-Id: I0898f1730da60ff03f8165b2f1a3ee18a7b2fec8
Reviewed-on: https://skia-review.googlesource.com/155162
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
On my Z840, Windows-Clang-Debug, this cuts the total time to construct
(parse) the 72 SVG sources from 66 seconds to 40 seconds. That's still
awful, but all the time is now spent in expat, so further improvements
will require higher level changes.
Bug: skia:
Change-Id: I0dca67ee18652f6fb8647fe8706716d9a01f7cdf
Reviewed-on: https://skia-review.googlesource.com/155603
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
This reverts commit d2ca0473f6.
Reason for revert: Various bots failing.
Original change's description:
> Add Short4 vertex attributes, and benchmark them as 4.12 colors
>
> This is likely our best widely portable option for encoding wide gamut
> colors that doesnt sacrifice too much performance. The benchmark uses
> them as we're likely to do: 4.12 fixed point, in the destination color
> space. We're using SINT vertex attributes for simplicity, so the encode
> and decode are simple multiply/divide by 4096.
>
> Bug: skia:
> Change-Id: I9b544f3e187b775d81f83dc9dd44611570ad33c2
> Reviewed-on: https://skia-review.googlesource.com/155001
> Reviewed-by: Mike Klein <mtklein@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=mtklein@google.com,bsalomon@google.com,brianosman@google.com
Change-Id: I921e29cf9a121c5752ec7d99a03470b5193afd4a
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/154883
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This is likely our best widely portable option for encoding wide gamut
colors that doesnt sacrifice too much performance. The benchmark uses
them as we're likely to do: 4.12 fixed point, in the destination color
space. We're using SINT vertex attributes for simplicity, so the encode
and decode are simple multiply/divide by 4096.
Bug: skia:
Change-Id: I9b544f3e187b775d81f83dc9dd44611570ad33c2
Reviewed-on: https://skia-review.googlesource.com/155001
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Updates the existing vertex color bench with a half-float mode.
Vanilla GL2/ES2 don't have half-float attributes. The extension
(OES_vertex_half_float) uses a different enum value for the type
parameter. For now, just support GL3/ES3. Otherwise, we could
add a check in GrGLGpu::setupGeometry to re-map GL_HALF_FLOAT
to GL_HALF_FLOAT_OES, based on caps?
Bug: skia:
Change-Id: I1325087db4e615023cceffe1c5b051232769d0ac
Reviewed-on: https://skia-review.googlesource.com/154822
Reviewed-by: Greg Daniel <egdaniel@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
The CPU type is still specified using GrVertexAttribType.
The GPU type is specified directly using GrSLType.
kHalfX_GrVertexAttribType now really means half-float buffer
data, rather than float. (Caveat: The GL enum is only correct
with ES3/GL3 - ES2+extension needs a different value. Sigh.)
Bug: skia:
Change-Id: Ife101db68a5d4ea1ddc2f6c60fbec0c66d725c16
Reviewed-on: https://skia-review.googlesource.com/154628
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
New templated function SkPDFMakeArray that for example replaced this
code:
auto array = sk_make_sp<SkPDFArray>();
array->reserve(4);
array->appendInt(0);
array->appendInt(0);
array->appendInt(width);
array->appendInt(height);
with this code:
auto array = SkPDFMakeArray(0, 0, width, height);
Move some functions from SkPDFUtils to the only place they
are used and make them static: SkPDFUtils::AppendTransform,
SkPDFUtils::DrawFormXObject, SkPDFUtils::WriteString, and
SkPDFUtils::AppendCubic.
Also replaced SkPDFResourceDict::getResourceName with
SkPDFResourceDict::WriteResourceName and eliminated
SkPDFResourceDict::GetResourceTypePrefix.
Change-Id: I891339fa2d1e5819f22fb8d10d8d8ef75c9507e3
Reviewed-on: https://skia-review.googlesource.com/153884
Commit-Queue: Hal Canary <halcanary@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
This reverts commit 8b68110507.
Reason for revert: breaks bots
Original change's description:
> SkStream: remove some WStream functions from public api
>
> move functions to SkStringPriv.h
>
> also add SkStrAppendU32Hex() function, and re-write
> SkString::insertHex() to use SkStrAppendU32Hex.
>
> add unit tests.
>
> Change-Id: Ieda98fb4106db71565b607e593713a91a5ddd892
> Reviewed-on: https://skia-review.googlesource.com/151986
> Reviewed-by: Cary Clark <caryclark@google.com>
> Commit-Queue: Hal Canary <halcanary@google.com>
TBR=halcanary@google.com,bungeman@google.com,caryclark@google.com,reed@google.com
Change-Id: Idbac615092f46c18b38e08385dafba20930f0ff0
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/152121
Reviewed-by: Cary Clark <caryclark@skia.org>
Commit-Queue: Cary Clark <caryclark@skia.org>
move functions to SkStringPriv.h
also add SkStrAppendU32Hex() function, and re-write
SkString::insertHex() to use SkStrAppendU32Hex.
add unit tests.
Change-Id: Ieda98fb4106db71565b607e593713a91a5ddd892
Reviewed-on: https://skia-review.googlesource.com/151986
Reviewed-by: Cary Clark <caryclark@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
The code generated from std::move()ing them should be fine.
Bug: skia:8355
Change-Id: I63ef650b5fbcf9fb6356006190eae5e0977ae642
Reviewed-on: https://skia-review.googlesource.com/151982
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
All PDFs are identical.
Change-Id: If2af8519a6440a5b61f91bf78fc7ae241f728183
Reviewed-on: https://skia-review.googlesource.com/151220
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
This reverts commit 5f7b5e3624.
Reason for revert: Codec CL has re-landed.
Original change's description:
> Revert "Stop conflating F16 with linear gamma"
>
> This reverts commit d1589c7213.
>
> Reason for revert: Depends on skcms CL that's been reverted.
>
> Original change's description:
> > Stop conflating F16 with linear gamma
> >
> > Note to self: I debugged this, realized that the codecs
> > need to handle A2B -> XYZ, then realized that I just need
> > to wait for https://skia-review.googlesource.com/c/skia/+/136062
> >
> > Bug: skia:
> > Change-Id: I594c22076feb3700b8a40c471a541fef5ff4e13e
> > Reviewed-on: https://skia-review.googlesource.com/137587
> > Commit-Queue: Brian Osman <brianosman@google.com>
> > Reviewed-by: Mike Klein <mtklein@google.com>
>
> TBR=mtklein@google.com,brianosman@google.com
>
> Change-Id: I6dca583697c8efd2563d30cb7ab9ef505b6903ae
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:
> Reviewed-on: https://skia-review.googlesource.com/148860
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Brian Osman <brianosman@google.com>
TBR=mtklein@google.com,brianosman@google.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: skia:
Change-Id: Iee66531049843758e7ed4130b99d8df6a553d805
Reviewed-on: https://skia-review.googlesource.com/149700
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit d1589c7213.
Reason for revert: Depends on skcms CL that's been reverted.
Original change's description:
> Stop conflating F16 with linear gamma
>
> Note to self: I debugged this, realized that the codecs
> need to handle A2B -> XYZ, then realized that I just need
> to wait for https://skia-review.googlesource.com/c/skia/+/136062
>
> Bug: skia:
> Change-Id: I594c22076feb3700b8a40c471a541fef5ff4e13e
> Reviewed-on: https://skia-review.googlesource.com/137587
> Commit-Queue: Brian Osman <brianosman@google.com>
> Reviewed-by: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,brianosman@google.com
Change-Id: I6dca583697c8efd2563d30cb7ab9ef505b6903ae
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/148860
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Note to self: I debugged this, realized that the codecs
need to handle A2B -> XYZ, then realized that I just need
to wait for https://skia-review.googlesource.com/c/skia/+/136062
Bug: skia:
Change-Id: I594c22076feb3700b8a40c471a541fef5ff4e13e
Reviewed-on: https://skia-review.googlesource.com/137587
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
We can now pass all cs/at params, so no need for UnpremulToUnpremul().
Also found a spot to use sk_srgb_singleton().
Does this make sense to apply to GrColorSpaceXformEffect too?
Change-Id: I1ee1f5919aa2ae841a98eeb5662cb80c244b1049
Reviewed-on: https://skia-review.googlesource.com/148665
Auto-Submit: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Various renames and other refactorings that will allow us to add new
stroking classes alongside the existing code for fills.
Bug: skia:
Change-Id: Ib477f9e1d87f9d4c1604719f9af0695a53614081
Reviewed-on: https://skia-review.googlesource.com/147503
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
All the existing calls are ported over, and new tests cover
unpremul output. (Opaque output is an impossible request.)
Change-Id: I744d640763cf74c368d3b3aba4a262c8fd9f7a01
Reviewed-on: https://skia-review.googlesource.com/147100
Commit-Queue: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Spotted the VisualBench hooks the other day, then found some more dead
code when I went to remove them.
Change-Id: Ia07f0556faf33cc69e3ec590f7a8f47f2c1f298a
Reviewed-on: https://skia-review.googlesource.com/146360
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
I hate SkColorSpaceXform,
and we think this is going to be faster, especially for single colors.
Add this mode of operation to our bench from yesterday.
No surprise, it's exactly as fast as pipeA.
This may DO the TODO?
Change-Id: I1b42b42d7647d85b62cd8397bb8d6f39c4829bcf
Reviewed-on: https://skia-review.googlesource.com/145823
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
w/ mtklein suggestions
Change-Id: Ifd7310ad71020c23514c663a0671400112b04e75
Reviewed-on: https://skia-review.googlesource.com/145824
Commit-Queue: Mike Klein <mtklein@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Herb Derby <herb@google.com>
Auto-Submit: Herb Derby <herb@google.com>
PipeA is where we want to be, and probably by filling in something
like the TODO I left in SkColorSpaceXformSteps.h?
curr/maxrss loops min median mean max stddev samples config bench
13/13 MB 49 82.8ns 83.2ns 83.2ns 84.1ns 0% █▂▅▄▂▁▃▄▃▃ nonrendering ColorSpaceXformBench_pipeB
13/13 MB 1259 29.6ns 29.7ns 30.4ns 37.2ns 8% ▁▁▁▁▁▁▁▁▁█ nonrendering ColorSpaceXformBench_pipeA
13/13 MB 661 110ns 119ns 119ns 128ns 4% ▅▅▅▅▅▅▅▅█▁ nonrendering ColorSpaceXformBench_steps
13/13 MB 26 239ns 247ns 283ns 609ns 40% ▁▁█▁▁▁▁▁▁▁ nonrendering ColorSpaceXformBench_xform
Change-Id: I98af634ab0a7a1522a5bcfde9ce3fc934d82ecf8
Reviewed-on: https://skia-review.googlesource.com/145643
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This reverts commit fdf05f4ff4.
Reason for revert: Android fixed after removing multitexture support from TextureOp.
Original change's description:
> Revert "Move GrGeometryProcessor's textures out of classes and into"
>
> This reverts commit af87483873.
>
> Revert "GrGeometryProcessor derives from GrNonAtomicRef not GrProgramElement."
>
> This reverts commit 607be37e3d.
>
> Revert "Store GrMeshDrawOps' meshes in GrOpFlushState's arena."
>
> This reverts commit b948572c78.
>
> Revert "Remove multitexturing support from GrTextureOp."
>
> This reverts commit 986f64c601.
>
> Revert "Make result of GrOp::combineIfPossible be an enum."
>
> This reverts commit 641ac7daa8.
>
> Bug: b/112244393
> Change-Id: I579491a3f2f2f2093f1e2a6141fa1e4cc7b760a4
> Reviewed-on: https://skia-review.googlesource.com/145646
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=bsalomon@google.com
Change-Id: I1d41c2ecf7862e31fb025a7a00bb07bae9d83a47
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: b/112244393
Reviewed-on: https://skia-review.googlesource.com/145780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit af87483873.
Revert "GrGeometryProcessor derives from GrNonAtomicRef not GrProgramElement."
This reverts commit 607be37e3d.
Revert "Store GrMeshDrawOps' meshes in GrOpFlushState's arena."
This reverts commit b948572c78.
Revert "Remove multitexturing support from GrTextureOp."
This reverts commit 986f64c601.
Revert "Make result of GrOp::combineIfPossible be an enum."
This reverts commit 641ac7daa8.
Bug: b/112244393
Change-Id: I579491a3f2f2f2093f1e2a6141fa1e4cc7b760a4
Reviewed-on: https://skia-review.googlesource.com/145646
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This is to prepare for a third value that requests that ops be linked
together so that the first op may do the work for multiple linked ops
without actually merging the GrOp objects.
Change-Id: Ib6e012a89be5edd054aee69d8475bea612331852
Reviewed-on: https://skia-review.googlesource.com/145522
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Auto-Submit: Brian Salomon <bsalomon@google.com>
This turned out to be an optimization mostly for draws with small device
space areas. Moreover, to be an optimization rather than deoptimization
requires complicated per-GPU tuning where even different devices within
the same architecture require different tuning and tuning is different
between GL and VK.
We've decided to go another direction where we *don't* coalesce draws
but rather make it possible to switch textures quickly from within an
op. This should be a GPU-independent optimization that is also
independent of device space area covered.
Replaces the multitexturing benchmarks with a pair of benchmarks.
composting_images* simulates a layered tile-based compositor.
image_cycle draws tiny images N times each such that they can be
batched. This is to catch a particular possible regression in a
planned change to GrTextureOp where it will use "dynamic state" to
batch across textures. We want to catch a slowdown that might result
from putting draws that use the same texture into the same op but no
longer batching the actual GL level draws and instead using the dynamic
state to "switch" textures between draws.
Change-Id: Ib1cc437525b0b0d56969c30dcb66bb1effb42dc5
Reviewed-on: https://skia-review.googlesource.com/145423
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
Remove late draw consolidation in GrOpFlushState. Rarely did anything
and doesn't work with new allocation strategy. Ops can use GrMesh arrays
to acheive the same thing. (Each Op that cared to would have to implement
but it isn't applicable to most Ops).
Modify GrMeshDrawOp::Target::draw() to take array of meshes, with single
mesh as a special case.
Change-Id: I552677de47b9ffd2fcaf55af85f70f290e5aa9c7
Reviewed-on: https://skia-review.googlesource.com/145426
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
It probably doesn't need to be ref counted at all and should be stored
in GrOpFlushState's arena but that's a larger change for another day.
Change-Id: I5f593fb426b8e7794f2ca81194f5a8d9e0f0a072
Reviewed-on: https://skia-review.googlesource.com/145332
Auto-Submit: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
SkColorSpace::MakeSRGB().get() is scary, and causes more ref/unref
pairs than strictly necessary for these singletons.
This time the implementation is still in SkColorSpace.cpp,
so these should really work as singletons.
Change-Id: I40f2942c8dcde3040663a04c4f5330aca90868ae
Reviewed-on: https://skia-review.googlesource.com/143305
Auto-Submit: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Brian Osman <brianosman@google.com>
This is a reland of 946c37057f
Original change's description:
> Reland "Add some optimizations to PolyUtils"
>
> This is a reland of 8bb0db3d07
>
> Original change's description:
> > Add some optimizations to PolyUtils
> >
> > * Switch inset/offset code to use a linked list rather than an array
> > * Use std::set to store active edge list for IsSimplePolygon rather than array
> > * Pre-alloc the priority queue for IsSimplePolygon
> > * When adding radial curves, expand the array all at once rather than pushing
> > one at a time.
> >
> > Bug: skia:
> > Change-Id: I692f8c29c500c41ec1d1be39d924d8a752676bf4
> > Reviewed-on: https://skia-review.googlesource.com/140787
> > Reviewed-by: Robert Phillips <robertphillips@google.com>
> > Commit-Queue: Jim Van Verth <jvanverth@google.com>
>
> Bug: skia:
> Change-Id: I3f5d42cfb941deab2b28bed020b37ce199e91d3d
> Reviewed-on: https://skia-review.googlesource.com/142200
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
Bug: skia:
Change-Id: I598d4be9108d009d0f885cfa72bf9197fc286b3a
Reviewed-on: https://skia-review.googlesource.com/142920
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Measures two different strategies for dealing with color space transform
of per-op colors. Assuming we already use vertex colors, is it better to
transform them on the CPU, and use float4 color attributes, or transform
them on the GPU, and use ubyte4 color attributes?
So far, looks like ubyte4 w/GPU transform wins.
Change-Id: If49d75303f669fe7f78af8771af906fa0e872577
Reviewed-on: https://skia-review.googlesource.com/142801
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This reverts commit 946c37057f.
Reason for revert: strict weak ordering: ((__x LT __y) && (__y LT __x)) != false
Original change's description:
> Reland "Add some optimizations to PolyUtils"
>
> This is a reland of 8bb0db3d07
>
> Original change's description:
> > Add some optimizations to PolyUtils
> >
> > * Switch inset/offset code to use a linked list rather than an array
> > * Use std::set to store active edge list for IsSimplePolygon rather than array
> > * Pre-alloc the priority queue for IsSimplePolygon
> > * When adding radial curves, expand the array all at once rather than pushing
> > one at a time.
> >
> > Bug: skia:
> > Change-Id: I692f8c29c500c41ec1d1be39d924d8a752676bf4
> > Reviewed-on: https://skia-review.googlesource.com/140787
> > Reviewed-by: Robert Phillips <robertphillips@google.com>
> > Commit-Queue: Jim Van Verth <jvanverth@google.com>
>
> Bug: skia:
> Change-Id: I3f5d42cfb941deab2b28bed020b37ce199e91d3d
> Reviewed-on: https://skia-review.googlesource.com/142200
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
TBR=jvanverth@google.com,bsalomon@google.com,robertphillips@google.com
Change-Id: Ie8cdf2375613c51dedaf0d11125d6d22d88821df
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/142281
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
This is a reland of 8bb0db3d07
Original change's description:
> Add some optimizations to PolyUtils
>
> * Switch inset/offset code to use a linked list rather than an array
> * Use std::set to store active edge list for IsSimplePolygon rather than array
> * Pre-alloc the priority queue for IsSimplePolygon
> * When adding radial curves, expand the array all at once rather than pushing
> one at a time.
>
> Bug: skia:
> Change-Id: I692f8c29c500c41ec1d1be39d924d8a752676bf4
> Reviewed-on: https://skia-review.googlesource.com/140787
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
Bug: skia:
Change-Id: I3f5d42cfb941deab2b28bed020b37ce199e91d3d
Reviewed-on: https://skia-review.googlesource.com/142200
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
This reverts commit 8bb0db3d07.
Reason for revert: Breaking Google3.
Original change's description:
> Add some optimizations to PolyUtils
>
> * Switch inset/offset code to use a linked list rather than an array
> * Use std::set to store active edge list for IsSimplePolygon rather than array
> * Pre-alloc the priority queue for IsSimplePolygon
> * When adding radial curves, expand the array all at once rather than pushing
> one at a time.
>
> Bug: skia:
> Change-Id: I692f8c29c500c41ec1d1be39d924d8a752676bf4
> Reviewed-on: https://skia-review.googlesource.com/140787
> Reviewed-by: Robert Phillips <robertphillips@google.com>
> Commit-Queue: Jim Van Verth <jvanverth@google.com>
TBR=jvanverth@google.com,bsalomon@google.com,robertphillips@google.com
Change-Id: Ie8afecd899fa9bd79d22fdf46ec82a0c9e94e893
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/141980
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
* Switch inset/offset code to use a linked list rather than an array
* Use std::set to store active edge list for IsSimplePolygon rather than array
* Pre-alloc the priority queue for IsSimplePolygon
* When adding radial curves, expand the array all at once rather than pushing
one at a time.
Bug: skia:
Change-Id: I692f8c29c500c41ec1d1be39d924d8a752676bf4
Reviewed-on: https://skia-review.googlesource.com/140787
Reviewed-by: Robert Phillips <robertphillips@google.com>
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Update all users to sk_sp.
Change-Id: I6453b9456b9a8f9e2b756381797f1382ef9e6561
Reviewed-on: https://skia-review.googlesource.com/141052
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Herb Derby <herb@google.com>
- Encoders and decoders always assume kIgnore.
- They are less opinionated about F16 and color space,
we just trust the color space that's passed in, and
put that directly in the image (no sRGB encoding).
- SkBitmap and SkPixmap read/write pixels functions were
defaulting to kResepct, those are now always kIgnore.
- Many other bits of plumbing are simplified, and I
added a default of kIgnore to SkImage::makeColorSpace,
so we can phase out that argument entirely.
- Still need to add defaults to other public APIs that
take SkTransferFunctionBehavior.
- This makes gold think that we've dramatically changed
the contents of all F16 images, but that's because
it doesn't understand the (now linear) color space
that's embedded. Once we triage them all once, they
will work fine (and they'll look perfect in the browser).
Bug: skia:
Change-Id: I62fa090f96cae1b67d181ce14bd91f34ff2ed747
Reviewed-on: https://skia-review.googlesource.com/140570
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
parametric_a and gamma_dst were unused outside of unit tests.
In all other cases, we always use parametric_{r,g,b} together
and always pass them the same argument. So we can collapse
them into a single stage like gamma and to/from_srgb.
Change-Id: I08cea896c7744f97b4f4bf9e029f5d643e45e177
Reviewed-on: https://skia-review.googlesource.com/140576
Commit-Queue: Mike Klein <mtklein@chromium.org>
Reviewed-by: Brian Osman <brianosman@google.com>
Change-Id: I6c4c4b43dfa6b59832c63f8fcf43192b4973d88b
Reviewed-on: https://skia-review.googlesource.com/140565
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
* Add fuzzer
* Add bench tests
* Add additional unit test
* Fix some bugs these exposed.
Bug: skia:
Change-Id: I6c587c92cb6cff32ab8300020b78f9f247d2bf64
Reviewed-on: https://skia-review.googlesource.com/139169
Commit-Queue: Jim Van Verth <jvanverth@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Change-Id: I4e1403eb63370f5e61283ed4a504fb352368adc0
Reviewed-on: https://skia-review.googlesource.com/139862
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
- Rename 'srgbnl' to just 'srgb'.
- Add 'narrow' and 'enarrow' for testing a gamut narrower than sRGB.
Tested by running xfermodes2 in DM... all look different, what a mess.
I also ran a few nanobenches and they seemed somewhat sane.
Change-Id: Iacdc391dc0eef4153a76f5b4f78d72c57a4371ee
Reviewed-on: https://skia-review.googlesource.com/135871
Commit-Queue: Mike Klein <mtklein@chromium.org>
Auto-Submit: Mike Klein <mtklein@chromium.org>
Reviewed-by: Brian Osman <brianosman@google.com>
It's a tiny, core-ish component -- might as well treat as such to
simplify dependencies.
Change-Id: I6f31ce2d151f9a629d88bfc7f15d64891d5150c0
Reviewed-on: https://skia-review.googlesource.com/135780
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Kevin Lubick <kjlubick@google.com>
Commit-Queue: Florin Malita <fmalita@chromium.org>
Use std::swap instead. It does not appear that any external user
specializes SkTSwap, but some may still use it. This removes all use in
Skia so that SkTSwap can later be removed in a smaller CL. After that
the <utility> include can be removed from SkTypes.h.
Change-Id: If03d4ee07dbecda961aa9f0dc34d171ef5168753
Reviewed-on: https://skia-review.googlesource.com/135578
Reviewed-by: Hal Canary <halcanary@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Ben Wagner <bungeman@google.com>
SkTCast is functionally equivalent to reinterpret_cast.
The comment about SkTCast helping to avoid strict alising issues is not
true. Dereferencing a pointer cast to a pointer of an unrelated type is
always undefined, even if smuggled through a union like in SkTCast.
To really avoid aliasing issues, you need to make a union[1] of the two
value types, or better, memcpy between values. I've had to fix
MatrixText.cpp where switching to reinterpret_cast actually let Clang
notice and warn that we're exploiting undefined behavior, and
GrSwizzle.h and SkCamera.cpp caught by GCC.
I've switched SkTLList over to use SkAlignedSTStorage, which seems
to help convince some GCC versions that fObj is used in a sound way.
[1] The union punning trick is non-standard in C++, but GCC and MSVC
both explicitly support it. I believe Clang does not officially
explicitly support it, but probably does quietly for GCC compatibility.
Change-Id: I71822e82c962f9aaac8be24d3c0f39f4f8b05026
Reviewed-on: https://skia-review.googlesource.com/134947
Commit-Queue: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Auto-Submit: Mike Klein <mtklein@chromium.org>
Reviewed-by: Brian Salomon <bsalomon@google.com>
This reverts commit 2a2f675926.
Reason for revert: this appears to be what is holding up the Chrome roll.
Original change's description:
> SkTypes: extract SkTo
>
> Change-Id: I8de790d5013db2105ad885fa2683303d7c250b09
> Reviewed-on: https://skia-review.googlesource.com/133620
> Reviewed-by: Mike Klein <mtklein@google.com>
TBR=mtklein@google.com,halcanary@google.com
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Change-Id: Iafd738aedfb679a23c061a51afe4b98a8d4cdfae
Reviewed-on: https://skia-review.googlesource.com/134504
Reviewed-by: Hal Canary <halcanary@google.com>
Commit-Queue: Hal Canary <halcanary@google.com>
Change-Id: I693ddcd4ade101ba4eb4102e03adce183aa1d672
Reviewed-on: https://skia-review.googlesource.com/133829
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit 01422bc8ef.
Reason for revert: follow on change may be ready
Original change's description:
> Revert "Reland "Require mips to be allocated at texture creation time and disable late allocations.""
>
> This reverts commit 9eb36b9eb8.
>
> Reason for revert: Alpha8 isn't renderable on es2 so we end up dropping draws on certain A8 mip requests
>
> Original change's description:
> > Reland "Require mips to be allocated at texture creation time and disable late allocations."
> >
> > This reverts commit 0c78238e29.
> >
> > Reason for revert: <INSERT REASONING HERE>
> >
> > Original change's description:
> > > Revert "Require mips to be allocated at texture creation time and disable late allocations."
> > >
> > > This reverts commit cd2c3f9055.
> > >
> > > Reason for revert: Looks to be causing angle failures on initial clear test
> > >
> > > Original change's description:
> > > > Require mips to be allocated at texture creation time and disable late allocations.
> > > >
> > > > If we get a non-mipped texture for a draw that wants to be use mip map filter, we
> > > > will copy the texture into a new mipped texture.
> > > >
> > > > Clean up of unused code in the GPU backends for reallocating for mips will be done
> > > > in a follow up CL.
> > > >
> > > > Bug: skia:
> > > > Change-Id: Idab588c1abf4bbbf7eeceb3727d500e5df274188
> > > > Reviewed-on: https://skia-review.googlesource.com/132830
> > > > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > > > Commit-Queue: Greg Daniel <egdaniel@google.com>
> > >
> > >
> > >
> > > Change-Id: I49f0ace52f2586d61b451630b2e6aae84b420b81
> > > No-Presubmit: true
> > > No-Tree-Checks: true
> > > No-Try: true
> > > Bug: skia:
> > > Reviewed-on: https://skia-review.googlesource.com/133041
> > > Reviewed-by: Greg Daniel <egdaniel@google.com>
> > > Commit-Queue: Greg Daniel <egdaniel@google.com>
> >
> > Bug: skia:
> > Change-Id: I004447a5f1ec72c3be2318ddea803f57efb12ea4
> > Reviewed-on: https://skia-review.googlesource.com/133340
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > Commit-Queue: Greg Daniel <egdaniel@google.com>
>
> TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com
>
> Change-Id: I9e9718d380c4d9927ec39e46008750ab7396391f
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:
> Reviewed-on: https://skia-review.googlesource.com/133680
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com
Change-Id: Ic3df69f65a89962b21cdb50ee436a29fd121ab1f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/133740
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
This reverts commit 9eb36b9eb8.
Reason for revert: Alpha8 isn't renderable on es2 so we end up dropping draws on certain A8 mip requests
Original change's description:
> Reland "Require mips to be allocated at texture creation time and disable late allocations."
>
> This reverts commit 0c78238e29.
>
> Reason for revert: <INSERT REASONING HERE>
>
> Original change's description:
> > Revert "Require mips to be allocated at texture creation time and disable late allocations."
> >
> > This reverts commit cd2c3f9055.
> >
> > Reason for revert: Looks to be causing angle failures on initial clear test
> >
> > Original change's description:
> > > Require mips to be allocated at texture creation time and disable late allocations.
> > >
> > > If we get a non-mipped texture for a draw that wants to be use mip map filter, we
> > > will copy the texture into a new mipped texture.
> > >
> > > Clean up of unused code in the GPU backends for reallocating for mips will be done
> > > in a follow up CL.
> > >
> > > Bug: skia:
> > > Change-Id: Idab588c1abf4bbbf7eeceb3727d500e5df274188
> > > Reviewed-on: https://skia-review.googlesource.com/132830
> > > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > > Commit-Queue: Greg Daniel <egdaniel@google.com>
> >
> >
> >
> > Change-Id: I49f0ace52f2586d61b451630b2e6aae84b420b81
> > No-Presubmit: true
> > No-Tree-Checks: true
> > No-Try: true
> > Bug: skia:
> > Reviewed-on: https://skia-review.googlesource.com/133041
> > Reviewed-by: Greg Daniel <egdaniel@google.com>
> > Commit-Queue: Greg Daniel <egdaniel@google.com>
>
> Bug: skia:
> Change-Id: I004447a5f1ec72c3be2318ddea803f57efb12ea4
> Reviewed-on: https://skia-review.googlesource.com/133340
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
TBR=egdaniel@google.com,bsalomon@google.com,robertphillips@google.com
Change-Id: I9e9718d380c4d9927ec39e46008750ab7396391f
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/133680
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Change-Id: I98d0a2295c4853e0c07d84e781c8b0236561d307
Reviewed-on: https://skia-review.googlesource.com/133584
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Mike Klein <mtklein@chromium.org>
This reverts commit 0c78238e29.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Revert "Require mips to be allocated at texture creation time and disable late allocations."
>
> This reverts commit cd2c3f9055.
>
> Reason for revert: Looks to be causing angle failures on initial clear test
>
> Original change's description:
> > Require mips to be allocated at texture creation time and disable late allocations.
> >
> > If we get a non-mipped texture for a draw that wants to be use mip map filter, we
> > will copy the texture into a new mipped texture.
> >
> > Clean up of unused code in the GPU backends for reallocating for mips will be done
> > in a follow up CL.
> >
> > Bug: skia:
> > Change-Id: Idab588c1abf4bbbf7eeceb3727d500e5df274188
> > Reviewed-on: https://skia-review.googlesource.com/132830
> > Reviewed-by: Brian Salomon <bsalomon@google.com>
> > Commit-Queue: Greg Daniel <egdaniel@google.com>
>
>
>
> Change-Id: I49f0ace52f2586d61b451630b2e6aae84b420b81
> No-Presubmit: true
> No-Tree-Checks: true
> No-Try: true
> Bug: skia:
> Reviewed-on: https://skia-review.googlesource.com/133041
> Reviewed-by: Greg Daniel <egdaniel@google.com>
> Commit-Queue: Greg Daniel <egdaniel@google.com>
Bug: skia:
Change-Id: I004447a5f1ec72c3be2318ddea803f57efb12ea4
Reviewed-on: https://skia-review.googlesource.com/133340
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Greg Daniel <egdaniel@google.com>
Now that "srgb" is broken I don't want to accidentally run it.
"srgbnl" if of course identical, and not broken so much as
simply not yet working. :)
While here, simplify the configs we run in nanobench too, eliminating
565 and moving F16 to GCE-only (i.e. fast, abundant machines).
Similarly, remove "adobe" VIA that doesn't use Adobe RGB correctly...
Change-Id: Ic295dec97a2caadadbe8500655243db36dd2c43d
Reviewed-on: https://skia-review.googlesource.com/132932
Commit-Queue: Mike Klein <mtklein@chromium.org>
Commit-Queue: Brian Osman <brianosman@google.com>
Auto-Submit: Mike Klein <mtklein@chromium.org>
Reviewed-by: Brian Osman <brianosman@google.com>
PS5: Removes SkDestinationSurfaceColorMode, tracking of mipmap
mode on GrTexture, sRGB decode state per-texture. Because we
were often choosing sRGB configs for RGB color types, legacy
rendering would then be incorrect (too dark). So...
PS7: Stops ever using sRGB pixel configs when translating
image info or color type. Also removes a bunch of GrCaps bits
and a GrContextOption that are no longer relevant.
PS9: Adjusts surface creation unit test expectations, and
changes the raster rules accordingly.
At this point, sRGB configs are (obviously) going to be broken.
Locally, I ran 8888, gl, and the gbr- versions of both. Across
all GMs x configs, there are 13 diffs. 12 are GMs that create
surfaces with a color-space attached (and thus, the offscreen
is no longer getting sRGB pixel config). The only remainder
constructs an SkPictureImageGenerator, (with an attached color
space) and renders it to the gbr-gl canvas, which triggers a
a tagged surface inside the generator.
Bug: skia:
Change-Id: Ie5edfa157dd799f3121e8173fc4f97f6c8ed6789
Reviewed-on: https://skia-review.googlesource.com/131282
Commit-Queue: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
bench PDFScalar_random goes from 120 ns to 70 ns.
Change-Id: I6254f5c900395ee470ffee26303915025a8f0dda
Reviewed-on: https://skia-review.googlesource.com/131151
Commit-Queue: Ben Wagner <bungeman@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
Auto-Submit: Hal Canary <halcanary@google.com>
Smaller is better, winner of each group marked with *:
* 0.81 sort_stdsort_repeated
2.60 sort_qsort_repeated
11.06 sort_skheap_repeated
15.81 sort_skqsort_repeated
* 1.76 sort_stdsort_backward
23.17 sort_qsort_backward
14.32 sort_skheap_backward
7.06 sort_skqsort_backward
* 0.78 sort_stdsort_forward
4.00 sort_qsort_forward
15.19 sort_skheap_forward
2.76 sort_skqsort_forward
13.47 sort_stdsort_rand10
27.71 sort_qsort_rand10
15.80 sort_skheap_rand10
* 11.11 sort_skqsort_rand10
17.94 sort_stdsort_rand
48.69 sort_qsort_rand
16.52 sort_skheap_rand
* 11.98 sort_skqsort_rand
libc++ must special case repeated, forward, and backward sorted data?
To reproduce, run this and ignore (unrelated) sort_topo_rand:
$ ninja -C out nanobench; and out/nanobench -m sort_ -q
Change-Id: I3724188f2a6acac61d9e8c2bd43443792e0ae0ce
Reviewed-on: https://skia-review.googlesource.com/131156
Commit-Queue: Mike Klein <mtklein@chromium.org>
Commit-Queue: Ben Wagner <bungeman@google.com>
Auto-Submit: Mike Klein <mtklein@chromium.org>
Reviewed-by: Ben Wagner <bungeman@google.com>
Most of this is (obviously) not necessary to do, but once
I started, I figured I'd just get it all. Tools (nanobench,
DM, skiaserve), all GMs, benches, and unit tests, plus support
code (command line parsing and config stuff).
This is almost entirely mechanical.
Bug: skia:
Change-Id: I209500f8df8c5bd43f8298ff26440d1c4d7425fb
Reviewed-on: https://skia-review.googlesource.com/131153
Reviewed-by: Mike Klein <mtklein@google.com>
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Osman <brianosman@google.com>
This wasn't being run (AFAICT) and was built on pre-skcms color management.
Change-Id: I506e8767f716bc6e4590ce255c5e40f1064fc152
Reviewed-on: https://skia-review.googlesource.com/129644
Commit-Queue: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Auto-Submit: Brian Osman <brianosman@google.com>
Reviewed-by: Mike Klein <mtklein@google.com>
Moves getCaps() from GrContext to GrContextPriv and removes unused refCaps().
Change-Id: Ic6a8951b656c0d1b2773eae73bff8e88af819866
Reviewed-on: https://skia-review.googlesource.com/127389
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
SkColorSetARGBMacro and SkColorSetARGBInline
are macros which will be deleted. Replace them
with a standard equivalent.
R=scroggo@google.com
Bug: skia:6898
Change-Id: I16e010776e991c19a375d0686ecd1b1cc4c59a9b
Reviewed-on: https://skia-review.googlesource.com/123501
Auto-Submit: Cary Clark <caryclark@skia.org>
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Leon Scroggins <scroggo@google.com>
When triangles get too thin it's possible for FP round-off error to
actually give us the wrong winding direction, causing rendering
artifacts. This change also allows us to unblacklist ANGLE.
Bug: skia:7805
Bug: skia:7820
Change-Id: Ibaa0f033eba625d720e3a594c4515d8264cc413d
Reviewed-on: https://skia-review.googlesource.com/123262
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
Gets rid of the ugly template functions, rearranges a few static
methods, and adds a benchmark.
Bug: skia:
Change-Id: I442f3a581ba7faf7601ae5be0c7e07327df09496
Reviewed-on: https://skia-review.googlesource.com/122128
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Chris Dalton <csmartdalton@google.com>
The strike cache and the glpyh cache have been friends
for a long time. Untangle this twisted relationship.
BUG=skia:7515
Change-Id: Ie77393f6923e9886ec90ff7a60a1200e78319937
Reviewed-on: https://skia-review.googlesource.com/122084
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Ben Wagner <bungeman@google.com>
BUG=skia:7515
Change-Id: Ic1580d4752d51a62df5427a28f843bc7b3181797
Reviewed-on: https://skia-review.googlesource.com/122020
Commit-Queue: Herb Derby <herb@google.com>
Reviewed-by: Mike Klein <mtklein@chromium.org>
This allows the tiler to optimally visit only the tiles that might intersect
the drawing. Not all call-sites can cheaply compute their bounds, so for those
we just pass nullptr, which tells the tiler to visit all of the tiles.
Bug: 818693
Bug: 820245
Bug: 820470
Change-Id: I8bda668a99bcdb2a9a74a8278ec0cf1004acba6e
Reviewed-on: https://skia-review.googlesource.com/119570
Commit-Queue: Mike Reed <reed@google.com>
Reviewed-by: Florin Malita <fmalita@chromium.org>
This reverts commit 97708e59ce.
Reason for revert: pain in the butt
Original change's description:
> allow timing in release-with-assert builds
>
> Change-Id: Ia85811bc113f951f3d7791371a5f97b49d156f70
> Reviewed-on: https://skia-review.googlesource.com/117368
> Reviewed-by: Brian Osman <brianosman@google.com>
> Commit-Queue: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,brianosman@google.com
Change-Id: I4282f5e887c7ec3198adde11a7300552644d22de
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://skia-review.googlesource.com/117441
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
Change-Id: Ia85811bc113f951f3d7791371a5f97b49d156f70
Reviewed-on: https://skia-review.googlesource.com/117368
Reviewed-by: Brian Osman <brianosman@google.com>
Commit-Queue: Mike Klein <mtklein@chromium.org>
GpuResources now dump optional string values that describe the type and
category of the resource. The type provides a description of the kind
of resource it is (e.g. texture, buffer object, stencil, etc.) and the
category describes what the resource is currently tasked to do (e.g.
path masks, images, scratch, etc.)
This CL also refactors the dump logic in an attempt to consolidate
duplicated code into GrGpuResources.cpp.
Bug: b/74435803
Change-Id: I83cae825f41e6450a21398ab3ecea349c7c61c15
Reviewed-on: https://skia-review.googlesource.com/115989
Commit-Queue: Derek Sollenberger <djsollen@google.com>
Reviewed-by: Robert Phillips <robertphillips@google.com>
Change-Id: I17a695c64be0e2081ad4937b23038b7ce88ae293
Reviewed-on: https://skia-review.googlesource.com/115988
Reviewed-by: Mike Klein <mtklein@chromium.org>
Commit-Queue: Hal Canary <halcanary@google.com>
Change-Id: I438bfb1a43857aa9e7e29b19e53dd921ec6eab1a
Reviewed-on: https://skia-review.googlesource.com/115604
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Change-Id: Id7b67bc1e4e994f96037266adf7dc159980e4169
Reviewed-on: https://skia-review.googlesource.com/115244
Reviewed-by: Jim Van Verth <jvanverth@google.com>
Commit-Queue: Herb Derby <herb@google.com>
Bug: b/70846442
Test: I5110881203c000474116a94a48f2afc9a9b62001
These methods were already called by the client. The client may have
further overridden the SkColorType (and therefore the SkColorSpace), so
respect their final decision on both.
Change-Id: Iddcf618e474784b0a000fd516250c44285dacc6b
Reviewed-on: https://skia-review.googlesource.com/114062
Commit-Queue: Leon Scroggins <scroggo@google.com>
Reviewed-by: Derek Sollenberger <djsollen@google.com>
This also adds GrGpu::create/deleteTestingOnlyBackendRenderTarget. Implemented in GL only for now.
Change-Id: I9e5fdc953c4a249959af89e08332f520cefe9d90
Reviewed-on: https://skia-review.googlesource.com/113305
Reviewed-by: Greg Daniel <egdaniel@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
Holding off on removing definition until android cleans
up its code.
Change-Id: I19cce13d6d1f10f172770a926966761686bc7d6a
Reviewed-on: https://skia-review.googlesource.com/113168
Reviewed-by: Ben Wagner <bungeman@google.com>
Commit-Queue: Herb Derby <herb@google.com>
A mechanical bulk move just to get these out of the public API.
TBR=bsalomon@google.com
Change-Id: I813efbd54a09dd448275697c0e50947753a5cfd3
Reviewed-on: https://skia-review.googlesource.com/112262
Commit-Queue: Robert Phillips <robertphillips@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 3a2cc2c2ec.
Fix code with samplecnt=0 that slipped in between trybots/CQ and landing of previous version
Change-Id: Iab19f2e8d1e9901601c8c76244d7a88c5d707fab
Reviewed-on: https://skia-review.googlesource.com/103181
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 5bb82cbecd.
Reason for revert: <INSERT REASONING HERE>
Original change's description:
> Revert "Revert "Revert "Revert "Redefine the meaning of sample counts in GPU backend.""""
>
> This reverts commit 18c52a7b52.
>
> Also relands "More sample count cleanup:" and "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
>
>
> Bug: skia:
> Change-Id: I4028105a3a1f16ce3944e134619eb6245af6b947
> Reviewed-on: https://skia-review.googlesource.com/102940
> Reviewed-by: Brian Salomon <bsalomon@google.com>
> Commit-Queue: Brian Salomon <bsalomon@google.com>
TBR=egdaniel@google.com,bsalomon@google.com
Change-Id: Idee23be2f1719f0bdc9305043e95a2d589bee8d1
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/103220
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit 18c52a7b52.
Also relands "More sample count cleanup:" and "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
Bug: skia:
Change-Id: I4028105a3a1f16ce3944e134619eb6245af6b947
Reviewed-on: https://skia-review.googlesource.com/102940
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
This reverts commit d0d7270fcc.
Revert "More sample count cleanup:"
This reverts commit d653cac70e.
Revert "Add new GrContext queries for imagability, surfacability, and max sample count of color types"
This reverts commit 85ae7159c9.
Need to understand NVPR perf changes before relanding
Change-Id: I0db075fb42438ef2a1f9885df184dce52892ac4b
Reviewed-on: https://skia-review.googlesource.com/102780
Reviewed-by: Brian Salomon <bsalomon@google.com>
Commit-Queue: Brian Salomon <bsalomon@google.com>
rename getSampleCount -> getRenderTargetSampleCount because it will return
0 when a config is not renderable but *is* supported as a texture format.
(Old name kept around until Chrome stops calling it)
Add virtual GrCaps::maxRenderTargetSampleCount(GrPixelConfig).
Devirtualize isConfigRenderable() and implement as maxRTSC != 0. Separate implementation for version with bool withMSAA param to be removed after Flutter is updated to no longer call.
Consolidate various file static GrSurfaceDesc validators fns into GrCaps::validateSurfaceDesc().
Bug: skia:
Change-Id: Ie30a291aa027e910df3bd90fac8518ccdb39e53f
Reviewed-on: https://skia-review.googlesource.com/102141
Commit-Queue: Brian Salomon <bsalomon@google.com>
Reviewed-by: Greg Daniel <egdaniel@google.com>
This reverts commit 8005bff7e6.
Reason for revert: hwui, flutter, and headless blink in G3 all still using these.
Original change's description:
> hide picture virtuals (no public callers)
>
> This prepares the way for a clean impl of a "placeholder" picture that never unrolls
>
> Bug: skia:
> Change-Id: I3b5785c5c94432b54e9a7dc280b2a6e716592473
> Reviewed-on: https://skia-review.googlesource.com/100260
> Commit-Queue: Mike Reed <reed@google.com>
> Reviewed-by: Mike Klein <mtklein@chromium.org>
TBR=mtklein@chromium.org,mtklein@google.com,reed@google.com
Change-Id: I385789dd420588ea9a9390c8a44c6ecb96c7f358
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: skia:
Reviewed-on: https://skia-review.googlesource.com/100880
Reviewed-by: Mike Klein <mtklein@google.com>
Commit-Queue: Mike Klein <mtklein@google.com>
