This eliminates any dynamic allocation for hash tables that are never used.
This helps SkPicture, where some tables (SkPaint) are almost always used, but
some rarely (SkMatrix) or never (SkRegion).
This also removes the (as yet unimportant) ability for the hash table to
shrink. This makes resizing harder to reason about, so I'd like to leave it
out until we see a need.
BUG=skia:1850
R=tomhudson@chromium.org, reed@google.com
Author: mtklein@google.com
Review URL: https://codereview.chromium.org/136403004
git-svn-id: http://skia.googlecode.com/svn/trunk@13051 2bbb7eff-a529-9590-31e7-b0007b416f81
SkBitmap.cpp:
When copyTo calls readPixels, only clone the genID if the resulting
SkPixelRef has the same dimensions as the original. This catches a
bug where copying an SkBitmap representing the subset of an SkPixelRef
(which implements onReadPixels) would result in the copy sharing the
genID. (Thanks to r6710, this case can only happen using setPixelRef,
so the updated GpuBitmapCopyTest checks for that.)
Move some unnecessary NULL checks to asserts.
When copyTo performs a memcpy, only clone the genID if the resulting
SkPixelRef has the same dimensions as the original. This catches a bug
where copying an extracted SkBitmap with the same width as its original
SkPixelRef would incorrectly have the same genID.
Add a comment and assert in deepCopyTo, when cloning the genID, since
that case correctly clones it.
BitmapCopyTest.cpp:
Pull redundant work out of the inner loop (setting up the source bitmaps
and testing extractSubset). Create a new inner loop for extractSubset, to
test copying the result to each different config.
Extract a subset that has the same width as the original, to catch the
bug mentioned above.
Remove the reporter assert which checks for the resulting rowbytes.
Add checks to ensure that copying the extracted subset changes the genID.
GpuBitmapCopyTest:
Create an SkBitmap that shares an existing SkPixelRef, but only represents
a subset. This is to test the first call to cloneGenID in SkBitmap::copyTo.
In this case, the genID should NOT be copied, since only a portion of the
SkPixelRef was copied.
Also test deepCopy on this subset.
TestIndividualCopy now takes a parameter stating whether the genID should
change in the copy. It also does a read back using the appropriate subset.
It no longer differentiates between copyTo and deepCopyTo, since that
distinction was only necessary for copying from/to configs other than 8888
(which are no longer being tested), where copyTo did a read back in 8888 and
then drew the result to the desired config (resulting in an imperfect copy).
BUG=skia:1742
R=mtklein@google.com, bsalomon@google.com, reed@google.com
Author: scroggo@google.com
Review URL: https://codereview.chromium.org/112113005
git-svn-id: http://skia.googlecode.com/svn/trunk@13021 2bbb7eff-a529-9590-31e7-b0007b416f81
This macro replaces:
SkString str;
str.printf("Foo test Expected %d got %d", x, y);
reporter->reportFailed(str);
with the shorter code:
REPORTF(reporter, ("Foo test Expected %d got %d", x, y));
The new form also appends __FILE__:__LINE__ to the message before calling reportFailed().
BUG=
R=mtklein@google.com
Review URL: https://codereview.chromium.org/132843002
git-svn-id: http://skia.googlecode.com/svn/trunk@13016 2bbb7eff-a529-9590-31e7-b0007b416f81
To do this, this patch changes the "offset/loc" parameter in filterImage() / onFilterImage() from an inout-param to an out-param only, so that the calling filter can know how much the input filter wants its result offset (and doesn't include the original primitive position). This offset can then be applied to the current filter's crop rect. (I've renamed the parameter "offset" in all cases to make this clear.) This makes the call sites in SkCanvas/SkGpuDevice responsible for applying the resulting offset to the primitive's position, which is actually a fairly small change.
This change also fixes SkTileImageFilter and SkOffsetImageFilter to correctly handle an input offset, which they weren't before. This required modifying the GM's, since they assumed the broken behaviour.
NOTE: this will require rebaselining the imagefiltersgraph test, since it has a new test case.
NOTE: this will "break" the Blink layout tests css3/filters/effect-reference-subregion-chained-hw.html and css3/filters/effect-reference-subregion-hw.html, but it actually makes them give correct results. It should be suppressed on the skia roll, and I'll rebaseline it.
R=reed@google.com
Review URL: https://codereview.chromium.org/112803004
git-svn-id: http://skia.googlecode.com/svn/trunk@12895 2bbb7eff-a529-9590-31e7-b0007b416f81
These flatten/unflatten function pointers were driving me nuts when reading the
generated assembly for this code. We don't need the flexibility of function
pointers here, so let's use templates to make it more manageable. You'll
notice we get much better typing now on flatten/unflatten.
BUG=
R=reed@google.com
Author: mtklein@google.com
Review URL: https://codereview.chromium.org/123213004
git-svn-id: http://skia.googlecode.com/svn/trunk@12873 2bbb7eff-a529-9590-31e7-b0007b416f81
This works in a way that is similar to SkData.
SkMallocPixelRef::NewWithProc
Motivation: Chrome has a ETC1PixelRef which calls delete[] on the
pixles on destruction. There is no reason for them to almost
duplicate our class, when we can provide them a more flexible
class. Example use:
static void delete_uint8_proc(void* ptr, void*) {
delete[] static_cast<uint8_t>(ptr);
}
SkPixelRef* new_delete_pixref(const SkImageInfo& info,
SkColorTable* ctable) {
size_t rb = info.minRowBytes();
return SkMallocPixelRef::NewWithProc(
info, rb, ctable,
new uint8_t[info.getSafeSize(rb)],
delete_uint8_proc, NULL);
}
SkMallocPixelRef::NewWithData
Motivation: This allows up to eliminate SkDataPixelRef. We
modified SkImage_Raster to use MallocPixelRef rather than
SkDataPixlRef.
Also: Unit tests in tests/MallocPixelRefTest.
BUG=
R=reed@google.com
Review URL: https://codereview.chromium.org/106883006
git-svn-id: http://skia.googlecode.com/svn/trunk@12861 2bbb7eff-a529-9590-31e7-b0007b416f81
Motivation: We want to remove redundant classes from Skia. To
that end we want to remove SkImageRef and its subclasses and
replace their uses with SkDiscardablePixelRef +
SkDecodingImageGenerator. Since Android uses SkImageRef, we need
to make sure that SkDecodingImageGenerator allows all of the
settings that Android exposes in BitmapFactory.Options.
To that end, we have created an Options struct for the
SkDecodingImageGenerator which lets the client of the generator set
sample size, dithering, and bitmap config.
We have made the SkDecodingImageGenerator constructor private
and replaced the SkDecodingImageGenerator::Install functions
with a SkDecodingImageGenerator::Create functions (one for
SkData and one for SkStream) which now take a
SkDecodingImageGenerator::Options struct.
Also added a ImageDecoderOptions test which loops through a list
of sets of options and tries them on a set of 5 small encoded
images.
Also updated several users of SkDecodingImageGenerator::Install to
follow new call signature - gm/factory.cpp, LazyDecodeBitmap.cpp,
and PictureTest.cpp, CachedDecodingPixelRefTest.cpp.
We also added a new ImprovedBitmapFactory Test which simulates the
exact function that Android will need to modify to use this,
installPixelRef() in BitmapFactory.
R=reed@google.com, scroggo@google.com
Committed: https://code.google.com/p/skia/source/detail?r=12744
Review URL: https://codereview.chromium.org/93703004
git-svn-id: http://skia.googlecode.com/svn/trunk@12855 2bbb7eff-a529-9590-31e7-b0007b416f81
Motivation: We want to remove redundant classes from Skia. To
that end we want to remove SkImageRef and its subclasses and
replace their uses with SkDiscardablePixelRef +
SkDecodingImageGenerator. Since Android uses SkImageRef, we need
to make sure that SkDecodingImageGenerator allows all of the
settings that Android exposes in BitmapFactory.Options.
To that end, we have created an Options struct for the
SkDecodingImageGenerator which lets the client of the generator set
sample size, dithering, and bitmap config.
We have made the SkDecodingImageGenerator constructor private
and replaced the SkDecodingImageGenerator::Install functions
with a SkDecodingImageGenerator::Create functions (one for
SkData and one for SkStream) which now take a
SkDecodingImageGenerator::Options struct.
Also added a ImageDecoderOptions test which loops through a list
of sets of options and tries them on a set of 5 small encoded
images.
Also updated several users of SkDecodingImageGenerator::Install to
follow new call signature - gm/factory.cpp, LazyDecodeBitmap.cpp,
and PictureTest.cpp, CachedDecodingPixelRefTest.cpp.
We also added a new ImprovedBitmapFactory Test which simulates the
exact function that Android will need to modify to use this,
installPixelRef() in BitmapFactory.
R=reed@google.com, scroggo@google.com
Review URL: https://codereview.chromium.org/93703004
git-svn-id: http://skia.googlecode.com/svn/trunk@12744 2bbb7eff-a529-9590-31e7-b0007b416f81
I found this while running a modified version of v8's tools/presubmit.py
script.
samplecode/SampleImage.cpp does not end with a single new line.
samplecode/SampleImageDir.cpp does not end with a single new line.
src/ports/SkFontHost_sandbox_none.cpp does not end with a single new line.
tests/FlatDataTest.cpp does not end with a single new line.
tests/ImageCacheTest.cpp has trailing whitespaces in line 31.
* Removed three empty files.
* Add single new line to FlatDataTest.cpp
* Removed trailing whitespace in ImageCacheTest.cpp
BUG=None
TEST=None
R=bsalomon@google.comTBR=bsalomon@google.com
Review URL: https://codereview.chromium.org/111503008
git-svn-id: http://skia.googlecode.com/svn/trunk@12684 2bbb7eff-a529-9590-31e7-b0007b416f81
Revert "Revert "PixelRef now returns (nearly) everything that is currently in SkBitmap. The goal is to refactor bitmap later to remove redundancy, and more interestingly, remove the chance for a disconnect between the actual (pixelref) rowbytes and config, and the one claimed by the bitmap.""""""
This reverts commit eabd6b2ed4e494b323c08f32358f45950a0368c3.
BUG=
Review URL: https://codereview.chromium.org/108773003
git-svn-id: http://skia.googlecode.com/svn/trunk@12624 2bbb7eff-a529-9590-31e7-b0007b416f81
Added SK_API to SkImageGenerator (already in include/).
Moved SkDiscardablePixelRef::Install to SkInstallDiscardablePixelRef,
added SK_API to that function, and moved declaration to
SkImageGenerator.h
This keeps the SkDiscardablePixelRef internal to Skia, but exposes a
method to install it into a bitmap.
Modifed tests that rely on this functio to use new version.
BUG=
R=mtklein@google.com, reed@google.com
Review URL: https://codereview.chromium.org/111713002
git-svn-id: http://skia.googlecode.com/svn/trunk@12612 2bbb7eff-a529-9590-31e7-b0007b416f81
- Implement ashmem-backed SkDiscardableMemory subclass:
This class in only accesible via the SkDiscardableMemory::Create()
function, which replaces the mock implementation in
SkDiscardableMemory_none.cpp
- Added SkDiscardableMemory_ashmem.cpp to the Android port of Skia
Removed SkDiscardableMemory_none.cpp from the Android port.
- Added DiscardableMemoryTest.
Still needs work.
- SkDiscardablePixelRef Bugfix:
onLockPixels() now calls SkDELETE on the SkDiscardableMemory pointer
when it fails to unlock.
- Improved documentation inside ashmem.h
BUG=
R=scroggo@google.com
Review URL: https://codereview.chromium.org/83563002
git-svn-id: http://skia.googlecode.com/svn/trunk@12608 2bbb7eff-a529-9590-31e7-b0007b416f81
Removed SkBitmapFactory since no clients were using it. New cache
selection mechanism can simply pass a SkDiscardableMemory::Factory
into the SkDiscardablePixelRef if non-default SkDiscardableMemory
should be used. Removed BitmapFactoryTest.
SkDiscardableMemory::Factory interface. Android will need this
functionality in the future inside their BitmapFactory.
Removed SkLazyPixelRef, since it's functionality is now subsumed into
SkDiscardablePixelRef. Removed LazyPixelRef test.
Modified SkDiscardablePixelRef to optionally allow it to use a
SkDiscardableMemory::Factory. This tiny change makes it a replacement
for SkLazyPixelRef. This functioanlity is also necessary for moving
Android over to SkDiscardablePixelRef from SkImageRef in a later CL.
Added a test for this.
SkDecodingImageGenerator::Install can optionally pass a factory in to
SkDiscardablePixelRef.
Removed SkImageCache, SkLruImageCache, and SkPurgeableImageCache.
This functionality can be handled much more cleanly by
SkDiscardableMemory.
New SkDiscardableMemoryPool class to replace SkLruImageCache. In a
later CL, we will replace SkImageRef_GlobalPool (used by android) as
well. This is a concrete implementation of
SkDiscardableMemory::Factory. Added a test for this.
modified gm/factory.cpp to remove dependnce on SkBitmapFactory +
SkLruImageCache. Now uses SkDecodingImageGenerator +
SkDiscardablePixelRef + SkDiscardableMemoryPool.
SkImageDecoder::Target replaces SkBitmapFactory::Target. The
DecodeMemoryToTarget function may disappear in the future.
Moved SkLazyCachingPixelRef::DecodeProc replaces
SkBitmapFactory::DecodeProc. This is a short term change, since
another CL changes SkLazyCachingPixelRef to use SkImageGenerator
instead of DecodeProc.
Modified DrawBitmapRectTest to use SkDiscardablePixelRef instead of
SkLazyPixelRef.
tools/LazyDecodeBitmap.cpp now uses SkDecodingImageGenerator +
SkDiscardablePixelRef instead of a SkBitmapFactory.
bench_pictures uses the Global SkDiscardableMemoryPool instead of a
global gLruImageCache.
R=reed@google.com, scroggo@google.com
Review URL: https://codereview.chromium.org/103033002
git-svn-id: http://skia.googlecode.com/svn/trunk@12515 2bbb7eff-a529-9590-31e7-b0007b416f81
Add INHERITED declarations to class declarations that prevent
compilation with the flag.
Remove SK_DEFINE_INST_COUNT from all class implementations. Instead,
use function-local static variables in the reference count helper
classes to create the global instances to store the needed info. The
accessor functions are defined inline in the helper classes, so
definitions are not needed. The initialization point of the variables
should be as well defined as previously.
Remove SK_DECLARE_INST_COUNT_TEMPLATE and use SK_DECLARE_INST_COUNT
instead. This avoids possible future compilation errors further.
For SK_ENABLE_INST_COUNT=0 compilation, add an empty static member
function to all classes that use SK_DECLARE_INST_COUNT and
SK_DECLARE_INST_COUNT_ROOT macros. The function ensures that classes
contain public INHERITED typedef. This member function seems to be
compiled away. This shouĺd ensure that part of the compilation errors
are caught earlier.
Also adds DSK_DECLARE_INST_COUNT to few SkPDFDict subclasses.
R=robertphillips@google.com, richardlin@chromium.org, bsalomon@google.com
Author: kkinnunen@nvidia.com
Review URL: https://codereview.chromium.org/98703002
git-svn-id: http://skia.googlecode.com/svn/trunk@12501 2bbb7eff-a529-9590-31e7-b0007b416f81
The GCC compilers for Android and Ubuntu do not seem to be able to
inline the memcmp operations on GrBinHashKey data. Write the comparisons
manually. Also shortcut GrBinHashKey::EQ to skip comparison when hashes
do not match.
Speeds up grresourcecache_find test on ARM and x86_64. Speeds up
grresourcecache_add on x86_64.
In order to test the change, moves ad hoc Gr unit tests from
src/gr_unittest.cpp to tests/GrUnitTests to be consistent with other
tests and enables GrUnitTests.
Fixes a regression from r2863 with where re-setting GrBinHashKey data
would not set the hash correctly. This should also improve the hash
function itself. The regression caused many of the hash operations be
no-ops. This is caught by the unit test.
Renames the comparison functions that GrHashTable needs from EQ, LT to
Equals, LessThan.
Renames GrTBinHashKey to GrBinHashKey. The GrTBinHashKey used to
forward comparison functions to an ENTRY template class, which would
extract the key and call back to the GrTBinHashKey. This would save
the user from writing one comparison function when comparison was done
with int ENTRY::compare(). There's no real benefit in this now. Also
this was used only for one class (GrTextureStripAtlas). The other use
in GrResourceKey was not actually using the provided "shortcut". The
new GrBinHashKey is not templated with the entry, rather just provides
== and < functions. The users of GrTHashTable provide the needed
functions now.
Adds explicit documentation of functions that are actually needed
GrTHashTable for the Key template. Adds SK_DEBUG guards according to
the contract.
R=bsalomon@google.com, mtklein@google.com
Author: kkinnunen@nvidia.com
Review URL: https://codereview.chromium.org/88113002
git-svn-id: http://skia.googlecode.com/svn/trunk@12426 2bbb7eff-a529-9590-31e7-b0007b416f81
SkTDStackNester is a class used by PdfViewer to assist in saving
and restoring the PDF state. Clean up and test this class.
Add some documentation.
Add FIXME's where I have questions to resolve.
Fix a bug where fNestingLevel was not initialized.
Remove a commented out line of code copied over from
SkTDStack.
Rename SkTDStackNester::nests() to nestingLevel() and make it const.
Remove unnecessary predeclaration and friend declaration.
Remove index() (both const and non-const versions). They were
unused, return something that may not be expected (index from
the top, rather than from the bottom), and don't work to get any
elements in earlier Recs once the first one is full.
Report a warning if the nesting level goes above the maximum level,
or if we attempt to bring it below zero.
Prevent fNestingLevel from dropping below zero.
Add kUnusedObject_SkPdfIssue, and use it where appropriate.
Depends on https://codereview.chromium.org/64093009/R=mtklein@google.com
Review URL: https://codereview.chromium.org/68843006
git-svn-id: http://skia.googlecode.com/svn/trunk@12328 2bbb7eff-a529-9590-31e7-b0007b416f81
Using Mike Klein's excellent coverage tool, increase the
unit testing of SkPath.cpp from 70% to 95%.
Along the way, determined that these functions were not
maintained or used:
SkPath::pathTo
SkPath::contains
as well as a large block of SkPath::cheapGetDirection().
Changed SkPath::validate() to permit infinities in
the path data points.
Fixed errors in preserving direction.
Fixed error setting direction when convexity is unknown.
Added missing conic to moveTo only detector.
BUG=
R=bsalomon@google.com, reed@google.com
Author: caryclark@google.com
Review URL: https://codereview.chromium.org/65493004
git-svn-id: http://skia.googlecode.com/svn/trunk@12291 2bbb7eff-a529-9590-31e7-b0007b416f81
SK_CONF_TRY_SET() is like SK_CONF_SET(), but doesn't complain if
confname can't be found. This is useful if the SK_CONF_DECLARE is
inside a source file whose linkage is dependent on the system.
Internally to the SkRTConf system, SkRTConfRegistry::set() was given
an additional parameter controling wanrings.
A new RuntimeConfig unit test was introduced. It should run silently.
In the future, it should be expanded to cover all of the SkRTConf
functionality.
(For example, the images.jpeg.suppressDecoderWarnings variable is
defined and used only in SkImageDecoder_libjpeg.cpp, but on MacOS, we
use Core Graphics via SkImageDecoder_CG.cpp - SkImageDecoder_libjpeg
is never linked in. The same is true of the Windows Imaging Component
on Windows.)
BUG=
R=reed@google.com
Review URL: https://codereview.chromium.org/54503007
git-svn-id: http://skia.googlecode.com/svn/trunk@12155 2bbb7eff-a529-9590-31e7-b0007b416f81
The reason for this CL is to allow greater decoder flexibility.
Chrome currently uses its own decoding functions. These allow for
greater flexibility in dealing with images with multiple frames or
partial data. The DecodeProc function was not flexible enough to
handle these. Instead of asking the decoder to squeeze everything
into the DecodeProc, we now ask the downstream library to inherit from
SkCachingPixelRef. If WebKit's LazyDecodingPixelRef is re-tooled to
inherit from SkCachingPixelRef, then it can make use of Skia's caching
ability while still allowing it to deal with multiple frames, scaling,
subsetting, and partial data.
- The abstract SkCachingPixelRef class handles caching the decoded
data in a SkScaledImageCache. This class relies on the virtual
functions onDecodeInfo() and onDecode() to do the actual decoding
of data.
- The SkLazyCachingPixelRef class is derived from SkCachingPixelRef.
It provides an implementation of onDecodeInfo() and onDecode() in
terms of calls to a SkBitmapFactory::DecodeProc function. It also
provides an Install() static method which installs a new
SkLazyCachingPixelRef into a SkBitmap.
SkLazyCachingPixelRef exists for two reasons: to test
SkCachingPixelRef within Skia and as an example for downstream
developers to make their own classes that inherit from
SkCachingPixelRef.
- The CachedDecodingPixelRefTest was updated to test the
SkLazyCachingPixelRef class and indirectly the SkCachingPixelRef
class.
BUG=
R=reed@google.com, scroggo@google.com
Author: halcanary@google.com
Review URL: https://codereview.chromium.org/54203006
git-svn-id: http://skia.googlecode.com/svn/trunk@12149 2bbb7eff-a529-9590-31e7-b0007b416f81
Fixes the cases where clip stack reduction would cause clip to be
re-rendered to stencil for each draw call. This causes unneeded
slowdown.
Stencil cache would not be used because the clip stack generation id communicated
by the clip stack element list would be invalid. This happended due to
a) clip stack reduction creating new elements in the element list.
b) purging logic removing the generation id, but reduction logic
selecting already purged element, and thus the generation id, as
the representative state of the clip.
Cases of a) where reduction would flatten the stack to a single new
element were fixed by assigning the generation id of the top-most
element of the clip stack as the generation id of the new
element. This is not strictly minimal, but enables more caching than
using invalid id.
Cases of a) where reduction would substitute a stack element with a
new element the generation id of the substituted element is used.
The b) part was fixed by removing the purging logic. It was not
exactly correct, as the previously purged states were actually
used. The purging was not used for anything.
Changes SkClipStack API to highlight that invalid generation id is
never returned by SkClipStack. Empty stacks are wide open. Changes the
clients to reflect this.
Fixes a crash when not passing anti-alias out parameter to
GrReducedClip::ReduceClipStack. The crash is not exercised in the
current code.
Committed: http://code.google.com/p/skia/source/detail?r=12084R=bsalomon@google.com, robertphillips@google.com
Author: kkinnunen@nvidia.com
Review URL: https://codereview.chromium.org/48593003
git-svn-id: http://skia.googlecode.com/svn/trunk@12127 2bbb7eff-a529-9590-31e7-b0007b416f81
Fixes the cases where clip stack reduction would cause clip to be
re-rendered to stencil for each draw call. This causes unneeded
slowdown.
Stencil cache would not be used because the clip stack generation id communicated
by the clip stack element list would be invalid. This happended due to
a) clip stack reduction creating new elements in the element list.
b) purging logic removing the generation id, but reduction logic
selecting already purged element, and thus the generation id, as
the representative state of the clip.
Cases of a) where reduction would flatten the stack to a single new
element were fixed by assigning the generation id of the top-most
element of the clip stack as the generation id of the new
element. This is not strictly minimal, but enables more caching than
using invalid id.
Cases of a) where reduction would substitute a stack element with a
new element the generation id of the substituted element is used.
The b) part was fixed by removing the purging logic. It was not
exactly correct, as the previously purged states were actually
used. The purging was not used for anything.
Changes SkClipStack API to highlight that invalid generation id is
never returned by SkClipStack. Empty stacks are wide open. Changes the
clients to reflect this.
Fixes a crash when not passing anti-alias out parameter to
GrReducedClip::ReduceClipStack. The crash is not exercised in the
current code.
R=bsalomon@google.com, robertphillips@google.com
Author: kkinnunen@nvidia.com
Review URL: https://codereview.chromium.org/48593003
git-svn-id: http://skia.googlecode.com/svn/trunk@12084 2bbb7eff-a529-9590-31e7-b0007b416f81
In some cases, the allocated array into which the data will be read is using getArrayCount() to allocate itself, which should be safe, but some cases use fixed length arrays or compute the array size before reading, which could overflow if the stream is compromised.
To prevent that from happening, I added a check that will verify that the number of bytes to read will not exceed the capacity of the input buffer argument passed to all the read...Array() functions.
I chose to use the byte array for this initial version, so that "size" represents the same value across all read...Array() functions, but I could also use the element count, if it is preferred.
Note : readPointArray and writePointArray are unused, so I could also remove them
BUG=
R=reed@google.com, mtklein@google.com, senorblanco@chromium.org
Author: sugoi@chromium.org
Review URL: https://codereview.chromium.org/37803002
git-svn-id: http://skia.googlecode.com/svn/trunk@12058 2bbb7eff-a529-9590-31e7-b0007b416f81
- SkScaledImageCache:
- Add new FindAndLock/AddAndLock variants that work well with
SkLazyPixelRefs (take width, height, generation_id).
- Add static versions of these new variants.
- SkLazyPixelRef:
- If NULL passed in as SkImageCache* in the constructor, it will
now default to using the static SkScaledImageCache methods to
cache decoded images.
- If (fImageCache==NULL), the default allocator can be changed
with the setAllocator method. If (fImageCache!=NULL), the
SkImageCache handles allocation.
- CachedDecodingPixelRefTest to test the new functionality.
BUG=
R=scroggo@google.com, mtklein@google.com, reed@google.com
Author: halcanary@google.com
Review URL: https://codereview.chromium.org/37343002
git-svn-id: http://skia.googlecode.com/svn/trunk@12006 2bbb7eff-a529-9590-31e7-b0007b416f81
This adds an invalidation listener mechanism to SkPixelRef to let it send this message while still staying ignorant of who's listening.
These messages are tricky to deliver. The SkPixelRefs they originates from and the GrResourceCaches they ultimately end up at may be on different threads; neither class is threadsafe; their object lifetimes are totally independent; it's a many-senders-to-many-receivers relation; and neither codebase should really know about the other.
So I've added a per-message-type global message bus to broadcast messages to threadsafe inboxes. Anyone can post() a message, which will show up in all the inboxes of that type, read whenever the inbox's owner calls poll(). The implementation is _dumb_; it can be improved in several dimensions (inbox size limits, lock-free message delivery) if we find the need.
I took some care to make sure not to send the invalidation message for any SkPixelRef that's sharing a generation ID with another SkPixelRef.
BUG=
R=bsalomon@google.com, scroggo@google.com, reed@google.com
Author: mtklein@google.com
Review URL: https://codereview.chromium.org/26734003
git-svn-id: http://skia.googlecode.com/svn/trunk@11949 2bbb7eff-a529-9590-31e7-b0007b416f81
This returns true if (1) the picture has finished recording and
(2) this picture or any picture drawn into it refers to any bitmaps.
It allows clients doing complicated manipulations of the picture to
early-out when there are no bitmaps present.
BUG=303281
R=reed@google.com
git-svn-id: http://skia.googlecode.com/svn/trunk@11935 2bbb7eff-a529-9590-31e7-b0007b416f81
Adds GrEffect::willUseInputColor() which indicates whether or not the
input color affects the output of the effect. This is needed for
certain Xfermodes, such as kSrc_Mode. For these modes the color filter
will not use the input color.
An effect with GrEffect::willUseInputColor() true will cause all color
or coverage effects before it to be discarded, as their computations
cannot affect the output. In these cases program is marked as having
white input color.
This fixes an assert when Skia is compiled in a mode that prefers
using uniforms instead of attributes for constants. (Flags
GR_GL_USE_NV_PATH_RENDERING or GR_GL_NO_CONSTANT_ATTRIBUTES). Using
attributes hides the problem where the fragment shader does not need
input color for color filters that ignore DST part of the filter. The
assert would be hit when uniform manager tries to bind an uniform which
has been optimized away by the shader compiler.
Adds specific GrGLSLExpr4 and GrGLSLExpr1 classes. This way the GLSL
expressions like "(v - src.a)" can remain somewhat readable in form of
"(v - src.a())". The GrGLSLExpr<typename> template implements the
generic functionality, GrGLSLExprX is the specialization that exposes
the type-safe interface to this functionality.
Also adds operators so that GLSL binary operators of the form
"(float * vecX)" can be expressed in C++. Before only the equivalent
"(vecX * float)" was possible. This reverts the common blending
calculations to more conventional order, such as "(1-a) * c" instead of
"c * (1-a)".
Changes GrGLSLExpr1::OnesStr from 1 to 1.0 in order to preserve the
color filter blending formula string the same (with the exception of
variable name change).
Shaders change in case of input color being needed:
- vec4 filteredColor;
- filteredColor = (((1.0 - uFilterColor.a) * output_Stage0) + uFilterColor);
- fsColorOut = filteredColor;
+ vec4 output_Stage1;
+ { // Stage 1: ModeColorFilterEffect
+ output_Stage1 = (((1.0 - uFilterColor_Stage1.a) * output_Stage0) + uFilterColor_Stage1);
+ }
+ fsColorOut = output_Stage1;
Shaders change in case of input color being not needed:
-uniform vec4 uFilterColor;
-in vec4 vColor;
+uniform vec4 uFilterColor_Stage0;
out vec4 fsColorOut;
void main() {
- vec4 filteredColor;
- filteredColor = uFilterColor;
- fsColorOut = filteredColor;
+ vec4 output_Stage0;
+ { // Stage 0: ModeColorFilterEffect
+ output_Stage0 = uFilterColor_Stage0;
+ }
+ fsColorOut = output_Stage0;
}
R=bsalomon@google.com, robertphillips@google.com, jvanverth@google.com
Author: kkinnunen@nvidia.com
Review URL: https://codereview.chromium.org/25023003
git-svn-id: http://skia.googlecode.com/svn/trunk@11912 2bbb7eff-a529-9590-31e7-b0007b416f81
Make GrProgramsTest check how many texture coordinate sets are
available and select random effects up until the amount runs out.
Otherwise, following effect sequence would fail the shader compilation
when Skia is compiled with nv_path_rendering on (eg. when fixed
function codepath is used):
* Stage 0: TextureDomain (1 texcoord)
* Stage 1: Convolution (1 texcoord)
* Stage 2: Bitmap Alpha Threshold (2 texcoords)
* Stage 3: DisplacementMap (2 texcoords)
* Stage 4: Config Conversion (1 texcoords)
* Stage 5: Two-Point Conical Gradient (2 texcoords)
This would use more texture coordinate sets than 8, which is fairly
common amount currently.
R=bsalomon@google.com, cdalton@nvidia.com
Author: kkinnunen@nvidia.com
Review URL: https://codereview.chromium.org/32403002
git-svn-id: http://skia.googlecode.com/svn/trunk@11881 2bbb7eff-a529-9590-31e7-b0007b416f81
This change removes sk_stdint.h since it is only needed for vs2008 and earlier.
This change removes SK_MMAP_SUPPORT define since it is no longer used.
This change removes the stdio.h include from SkTypes.h since on many systems
this is a very large header, few Skia files actually use it, it is
available everywhere standard, and SkDebugf should be used instead.
After this change there is no need for external users to put Skia's
include/config into their own list of includes, saving the headache
of having two header files of the same name and sometimes getting the
wrong one depending on include order.
R=bsalomon@google.com, djsollen@google.com
Review URL: https://codereview.chromium.org/27044002
git-svn-id: http://skia.googlecode.com/svn/trunk@11738 2bbb7eff-a529-9590-31e7-b0007b416f81
Add new runtime configuration variable,
images.gif.suppressDecoderWarnings, which suppresses warning and
errors from the GIF library. It defaults to "true", which is current
behavior.
(This setting can be changed by setting the environment variable
skia_images_gif_suppressDecoderWarnings="false".)
Some conditions which were errors before are now warnings:
- If the image width or height is greater than the GIF screen width or
height (respectively) we expand the screen to hold the image.
- If the offset of the image inside the screen would place the
image outside of the screen, we shift the image to fix this.
- If the image lacks a color table, we create a default color table.
- If the image is truncated, then the rest of the image is filled with
the fill color.
In all four cases, if images.gif.suppressDecoderWarnings is set to
false, then a warning message is printed via SkDebugf.
In the event of another kind of error, SkGIFImageDecoder::onDecode()
will still return false. But with this change, if
images.gif.suppressDecoderWarnings is set to false, a description of
the error is printed via SkDebugf.
Also, added a new unit test GifTest, which tests the deconing of both
good GIf files and corrupted files that should now work with this
change. This unit test is disabled on Win32, iOS, and Mac.
BUG=skia:1689
R=scroggo@google.com
Review URL: https://codereview.chromium.org/26743002
git-svn-id: http://skia.googlecode.com/svn/trunk@11734 2bbb7eff-a529-9590-31e7-b0007b416f81
I noticed SkMatrix <-> SkMatrix44 conversions were dropping the
perspective values on the floor. As we use SkMatrix44 heavily in
Chromium, I'm concerned this missing code will cause a bug eventually.
It should be correct to simply use the bottom row of the 4x4 matrix
excluding the third column.
Previously committed and reverted, second attempt with fix for
incorrect use of SkMScalar/SkScalar.
BUG=
R=reed@google.com, caryclark@google.com
Author: aelias@chromium.org
Review URL: https://codereview.chromium.org/25484006
git-svn-id: http://skia.googlecode.com/svn/trunk@11624 2bbb7eff-a529-9590-31e7-b0007b416f81
I noticed SkMatrix <-> SkMatrix44 conversions were dropping the
perspective values on the floor. As we use SkMatrix44 heavily in
Chromium, I'm concerned this missing code will cause a bug eventually.
It should be correct to simply use the bottom row of the 4x4 matrix
excluding the third column.
BUG=
R=reed@google.com
Author: aelias@chromium.org
Review URL: https://codereview.chromium.org/25484006
git-svn-id: http://skia.googlecode.com/svn/trunk@11622 2bbb7eff-a529-9590-31e7-b0007b416f81
This change address what happens when a jpeg is partially downloaded
before failing. Many browsers will render it anyway: we want Skia to
do the same. The JpegTest takes a perfectly cromulent jpeg file and
only passes into the ImageDecoder the first half of the image. We
then verify that the image decoder returns a valid bitmap of the
correct dimensions.
We also fixed some png library errors, including issue 1691.
Also, suppressed the majority of warnings from using libpng and
libjpeg. By default, most warnings are *not* suppressed in debug mode.
If you have a debug binary and wish to suppress warnings, set the
following environment variables to true
skia_images_png_suppressDecoderWarnings
skia_images_jpeg_suppressDecoderWarnings
or from within a program that links to Skia:
#if defined(SK_DEBUG)
#include "SkRTConf.h"
SK_CONF_SET("images.jpeg.suppressDecoderWarnings", true);
SK_CONF_SET("images.png.suppressDecoderWarnings", true);
#endif
I tested this, before (control) and after these changes (test), on
364,295 skps from the cluster telemetry.
- number of errors+warnings in control = 2804
- number of errors+warnings fixed = 2283
- number of PNG verbosity fixed = 2152
- number of PNG error fixed = 4
- number of PNG segfault fixed = 3
- number of PNG errors changed to warnings = 62
- number of JPG verbosity fixed = 26
- number of JPG error fixed = 91
Not all errors and warning have been fixed.
These numbers were generated using the find_bad_images_in_skps.py
program. This program may be useful going forward for testing
image-decoding libraries on skp files from the cluster telemetry.
find_bad_images_in_skps.py depends on the test_image_decoder program,
which simply executes the SkImageDecoder::DecodeFile function and uses
its exit status to report success or failure.
BUG=skia:1649
BUG=skia:1691
BUG=skia:1680
R=scroggo@google.com
Review URL: https://codereview.chromium.org/24449003
git-svn-id: http://skia.googlecode.com/svn/trunk@11597 2bbb7eff-a529-9590-31e7-b0007b416f81
These guys are not heavily contended nor speed critical. No need for atomics,
plus this makes tsan stop complaining (correctly) about reading fNextIndex
unsafely in onEnd.
I took a look at failCount/fFailCount, which I think is safely atomic and quite
conveniently so: It's never read until all the threads which could possibly
increment it have terminated (except for the one where it was created,
obviously). We could guard it with a mutex too, but maybe we can let this one
slide.
BUG=
R=bungeman@google.com
Author: mtklein@google.com
Review URL: https://codereview.chromium.org/25357002
git-svn-id: http://skia.googlecode.com/svn/trunk@11561 2bbb7eff-a529-9590-31e7-b0007b416f81
Only implemented for PNG.
Add a getter and setter, and sets the default to false in the
constructor. Also copies the setting in copyFieldsToOther.
Fix an indpendent bug where fDitherImage was not being copied in
copyFieldsToOther.
In SkScaledBitmapSampler::begin, consolidate the settings passed in
by passing a const reference to the decoder. The decoder can be
referenced for its settings of dither, unpremultiplied, and now
skipping writing zeroes. Update callers to use the new API. In png
decoder, rather than passing around a pointer to an initial
read of getDitherImage, and potentially changing it, look at the
field on the decoder itself, and modify it directly. This is a
change in behavior - now if that same decoder is used to decode
a different image, the dither setting has changed. I think this is
okay because A) the typical use case is to use a new decoder for
each decode, B) we do not make any promises that a decode does not
change the decoder and C) it makes the code in SkScaledBitmapSampler
much cleaner.
In SkScaledBitmapScampler, add new row procs for skipping zeroes. Now
that choosing the row proc has five dimensions (src config, dst config,
dither, skip writing zeroes, unpremultiplied), use a new method: each
src/dst combination has a function for choosing the right proc depending
on the decoder.
SkScaledBitmapScampler::RowProc is now public for convenience.
Remove Sample_Gray_D8888_Unpremul, which is effectively no different
from Sample_Gray_D8888.
In cases where unpremultiplied was trivial, such as 565 and when
sampling from gray, decoding may now succeed.
Add a benchmark (currently disabled) for comparing the speed of skipping
writing zeroes versus not skipping. For this particular image, which is
mostly transparent pixels, normal decoding took about 3.6 milliseconds,
while skipping zeroes in the decode took only about 2.5 milliseconds
(this is on a Nexus 4). Presumably it would be slower on an image
with a small amount of transparency, but there will be no slowdown
for an image which reports that it has no transparency.
In SkImageRef_ashmem, always skip writing zeroes, since ashmem
memory is guaranteed to be initialized to 0.
Add a flag to skip writing zeroes in skimage.
Add a regression test for choosing the rowproc to ensure I did not
change any behavior accidentally.
BUG=skia:1661
R=reed@google.com
Review URL: https://codereview.chromium.org/24269006
git-svn-id: http://skia.googlecode.com/svn/trunk@11558 2bbb7eff-a529-9590-31e7-b0007b416f81
Only affects factories, static functions that will use the factories,
and subset decoding, which all require rewinding. The decoders
themselves continue to take an SkStream. This is merely documentation
stating which functions will possibly rewind the passed in SkStream.
This is part of the general change to coordinate SkStreams with
Android's streams, which don't necessarily support rewinding in all
cases.
Update callers to use SkStreamRewindable.
BUG=skia:1572
R=bungeman@google.com, reed@google.com
Review URL: https://codereview.chromium.org/23477009
git-svn-id: http://skia.googlecode.com/svn/trunk@11460 2bbb7eff-a529-9590-31e7-b0007b416f81
I'm seeing basically no difference between malloc + bzero and calloc on my desktop, but on a Galaxy Nexus calloc is never slower, and significantly faster once the allocation size becomes large, both for allocation and for _reading_.
BUG=skia:1662
R=reed@google.com
Review URL: https://codereview.chromium.org/24251008
git-svn-id: http://skia.googlecode.com/svn/trunk@11414 2bbb7eff-a529-9590-31e7-b0007b416f81
Last week, the fuzzer found a few numerical issue with filters and I had written some fixes for them. Here are the fixes with some unit tests.
For senorblanco : So I figured out what was asserting when we'd get a 0 width "result" in SkBicubicImageFilter::onFilterImage(). Basically, if the "result" SkBitmap object calls SkBitmap::setConfig() with "width" and/or "height" set to 0, then the SkBitmap object will call SkBitmap::reset(), making the SkBitmap object's config invalid. At this point, calling SkBitmap::getAddr32() will assert, even without attempting to dereference the data pointer, because the SkBitmap's config is invalid. If height is valid, but width is 0, then this call to SkBitmap::getAddr32() happens directly in SkBicubicImageFilter::onFilterImage() a few lines lower and asserts right away.
BUG=
R=senorblanco@google.com, senorblanco@chromium.org, bsalomon@google.com
Author: sugoi@chromium.org
Review URL: https://chromiumcodereview.appspot.com/23533042
git-svn-id: http://skia.googlecode.com/svn/trunk@11249 2bbb7eff-a529-9590-31e7-b0007b416f81
Obviously these are all currently function pointers of type T(*)(P) for various
T and P. In bench refactoring, I'm trying to register a function pointer of
type T(*)(), which can't be done as is (passing P=void doesn't work). This
also lets us register things like primitives, which is conceivable useful.
BUG=
R=reed@google.com, scroggo@google.com
Review URL: https://codereview.chromium.org/23453031
git-svn-id: http://skia.googlecode.com/svn/trunk@11082 2bbb7eff-a529-9590-31e7-b0007b416f81
cleaned up SkPictureFlat.h quite a bit while working on this.
bench --match picture_record_ shows some improvement:
compare.sh bench --match picture_record_ --repeat 100
master -> usehash
N=3 p=0.001000 (corrected to 0.000333)
sig? rel. speed bench
y 1.0x picture_record_dictionaries
y 1.5x picture_record_recurring_paint_dictionary
y 3.8x picture_record_unique_paint_dictionary
Overall relative speed: 1.9x
bench_pictures --record is pretty much neutral:
compare.sh bench_pictures -r ../skp --mode record --repeat 30
master -> usehash
N=63 p=0.001000 (corrected to 0.000016)
sig? rel. speed bench
n 0.9x desk_pokemonwiki.skp
y 0.9x desk_googlespreadsheet.skp
y 0.9x tabl_pravda.skp
y 1.0x desk_googlespreadsheetdashed.skp
n 1.0x tabl_onlinewsj.skp
n 1.0x tabl_nytimes.skp
n 1.0x desk_googlehome.skp
y 1.0x desk_techcrunch.skp
n 1.0x tabl_slashdot.skp
n 1.0x tabl_techmeme.skp
n 1.0x desk_googleplus.skp
n 1.0x desk_sfgate.skp
n 1.0x tabl_transformice.skp
n 1.0x desk_espn.skp
n 1.0x desk_baidu.skp
n 1.0x tabl_worldjournal.skp
n 1.0x desk_chalkboard.skp
n 1.0x tabl_frantzen.skp
n 1.0x desk_gws.skp
n 1.0x tabl_androidpolice.skp
n 1.0x desk_linkedin.skp
n 1.0x mobi_wikipedia.skp
n 1.0x desk_wowwiki.skp
n 1.0x desk_css3gradients.skp
n 1.0x desk_gmailthread.skp
n 1.0x desk_yahoogames.skp
n 1.0x desk_facebook.skp
n 1.0x desk_wordpress.skp
n 1.0x tabl_vnexpress.skp
n 1.0x desk_br337.skp
n 1.0x tabl_engadget.skp
n 1.0x tabl_theverge.skp
n 1.0x desk_amazon.skp
n 1.0x desk_ebay.skp
n 1.0x tabl_hsfi.skp
n 1.0x tabl_sahadan.skp
n 1.0x desk_weather.skp
n 1.0x tabl_digg.skp
n 1.0x desk_youtubetvbrowse.skp
n 1.0x tabl_culturalsolutions.skp
n 1.0x tabl_ukwsj.skp
n 1.0x desk_youtube.skp
n 1.0x tabl_googlecalendar.skp
y 1.0x desk_yahooanswers.skp
n 1.0x desk_blogger.skp
n 1.0x desk_yahoonews.skp
y 1.0x desk_yahoosports.skp
y 1.0x tabl_mercurynews.skp
n 1.0x desk_youtubetvvideo.skp
y 1.0x tabl_gspro.skp
y 1.1x tabl_googleblog.skp
y 1.1x tabl_cnet.skp
y 1.1x tabl_mlb.skp
y 1.1x tabl_cuteoverload.skp
y 1.1x desk_booking.skp
y 1.1x tabl_deviantart.skp
y 1.1x desk_twitter.skp
y 1.1x tabl_cnn.skp
y 1.1x tabl_gamedeksiam.skp
y 1.1x tabl_gmail.skp
y 1.1x tabl_nofolo.skp
y 1.1x tabl_mozilla.skp
y 1.1x desk_pinterest.skp
Overall relative speed: 1.0x
(I'd take this to mean that the microbenches are probably drifting away from relevance.)
BUG=
R=reed@google.com
Review URL: https://codereview.chromium.org/21564008
git-svn-id: http://skia.googlecode.com/svn/trunk@10825 2bbb7eff-a529-9590-31e7-b0007b416f81
- add validate()
- make add() and remove() strict
- fill in maybeShrink()
- make grow and shrink thresholds configurable.
- fix issue where we were getting filled with deleted items - we need to count them as occupied when determining if we should grow
BUG=
R=reed@google.com
Review URL: https://codereview.chromium.org/22571010
git-svn-id: http://skia.googlecode.com/svn/trunk@10677 2bbb7eff-a529-9590-31e7-b0007b416f81
Use SkIntToScalar.
Reflect that 8888 can be copied to 4444 in BitmapCopyTest.
Unreviewed.
git-svn-id: http://skia.googlecode.com/svn/trunk@10623 2bbb7eff-a529-9590-31e7-b0007b416f81
In order to preserve the immutability of SkImageFilters, the crop rect is passed as a constructor parameter. If NULL (the default), the bounds of the input image are used, as before.
This also tightens up the boundary handling for SkImageBlurFilter on the GPU backend. Where we were previously using clamping semantics, we now respect decal semantics (so we don't oversaturate the edges). This brings the GPU and raster backends into closer alignment, but will require some new baselines for the GPU tests.
At a minimum, the following tests will need new baselines: imageblur, imagefiltersbase, imagefilterscropped, spritebitmap.
R=reed@google.com
Committed: https://code.google.com/p/skia/source/detail?r=10251
Review URL: https://codereview.chromium.org/19775006
git-svn-id: http://skia.googlecode.com/svn/trunk@10338 2bbb7eff-a529-9590-31e7-b0007b416f81
