Needed to enlarge radii to surface bugs without exceeding max texture size on low end devices.
BUG=chromium:477684
Review URL: https://codereview.chromium.org/1508003008
Make each filter responsible for expanding its destination
bounds. Previously, we were using a union of all
intermediate bounds sizes via join() calls in many image
filters' computeFastBounds(), due to the fact that those
filters could only produce bitmaps the same size as their
inputs. Now, we compute optimal bounds for each filter as
follows:
1) Pass the (unmodified) clip bounds to the root node
of the DAG in the first recursive call to onFilterImage()
as the Context's fClipBounds.
2) Reverse-map the clip: when recursing up the DAG in
filterInput[GPU](), apply filter-specific expansion to the
clip by calling calling onFilterNodeBounds(... kReverse).
This allows upstream nodes to have a clip that respects the
current node's requirements. This is done via helper
function mapContext().
3) Forward-map the source bitmap: just prior to applying
the crop rect in applyCropRect(), we determine the filter's
preferred bounds by mapping the source bitmap bounds
forwards via onFilterNodeBounds(..., kForward).
NOTE: GMs affected by this change:
fast_slow_blurimagefilter: fast and slow paths now produce the same result
spritebitmap: drawSprite() and drawBitmap() paths now produce the same result
filterfastbounds: fast bounds are optimized; all drop-shadow results now appear
apply-filter: snug and not-snug cases give same results
dropshadowimagefilter: drawSprite() results now show shadows
draw-with-filter: no artifacts on erode edges; blur edges no longer clipped
displacement, imagefiltersbase, imagefiltersclipped, imagefilterscropexpand, imagefiltersscaled, matriximagefilter,
resizeimagefilter, localmatriximagefilter, testimagefilters: fixed incorrect clipping
imagefilterstransformed, morphology: no artifacts on erode edges
BUG=skia:1062,skia:3194,skia:3939,skia:4337,skia:4526
Review URL: https://codereview.chromium.org/1308703007
- Update SkCodec's dox to point out that some of the data must be
read twice in order to decode
- Add an accessor that reports how much is needed for reading twice
- Make SkCodec default to use peek()
If an input stream supports peek()ing, peek() instead of reading.
This way the stream need not implement rewind()
- Make SkCodec use read() + rewind() as a backup
So that streams without peek() implemented can still function
properly (assuming they can rewind).
- read everything we may need to determine the format once
In SkCodec::NewFromStream, peek()/read() 14 bytes, which is enough
to read all of the types we support. Pass the buffer to each subtype,
which will have enough info to determine whether it is the right
type. This simplifies the code and results in less reading and
rewinding.
- NOTE: SkWbmpCodec needs the following number of bytes for the header
+ 1 (type)
+ 1 (reserved)
+ 3 (width - bytes needed to support up to 0xFFFF)
+ 3 (height - bytes needed to support up to 0xFFFF)
= 8
- in SkWebpCodec, support using read + rewind as a backup if peek does
not work.
A change in Android will add peek() to JavaInputStreamAdapter.
BUG=skia:3257
Review URL: https://codereview.chromium.org/1472123002
Will no longer be needed once ag/817367 lands - Android will be
inheriting directly from SkPngChunkReader, so no need for the
intermediate.
BUG=skia:4574
Review URL: https://codereview.chromium.org/1470913004
It's undefined behavior to pass null as src or dst to memcpy, even if len is 0.
This currently triggers -fsanitize=attribute-nonnull warnings, but also can
lead to very unexpected code generation with GCC.
sk_careful_memcpy() checks len first before calling memcpy(),
which prevents that weird undefined situation.
This allows me to mark all sanitizers as no-recover, i.e. make-the-bots-red fatal.
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Debug-ASAN-Trybot
BUG=skia:4641
NOTREECHECKS=true
Review URL: https://codereview.chromium.org/1510683002
Add SkImageEncoder::EncodeData(const SkPixmap&, ...) function.
Add SkImageEncoder::CreatePixelSerializer() to return a
PixelSerializer that calls into SkImageEncoder::EncodeData.
SkImage::encode() make use of SkImageEncoder::CreatePixelSerializer.
Review URL: https://codereview.chromium.org/1507123002
Replaces drawPathsFromRange with a more general drawPathBatch method.
While this still isn't perfect, it's a step in the right direction that
removes the need for path range draws to fit in a public API.
BUG=skia:
Review URL: https://codereview.chromium.org/1506823004
If the stream can peek less than requested, peek that amount. Return
the number of bytes peeked.
This simplifies crrev.com/1472123002. For a stream that is smaller than
14 bytes, it can successfully peek, meaning the client will not need to
fall back to read() + rewind(), which may fail if the stream can peek
but not rewind.
This CL revives code from patch set 3 of crrev.com/1044953002, where I
initially introduced peek() (including tests).
Add a test for SkFrontBufferedStream that verifies that peeking does
not make rewind() fail (i.e. by reading past the internal buffer).
BUG=skia:3257
Review URL: https://codereview.chromium.org/1490923005
Because the convolution kernel is (currently) applied in device space,
there's no way to know which object-space pixels will be touched. So
return false from canComputeFastBounds().
The results from the matrixconvolution GM were actually wrong, since
they were showing edge differences on the clip boundaries, where they
should really only show on crop boundaries. I added a crop to the GM
to keep the results the same (which are useful to test the different
convolution tile modes).
While I was at it, SkImageFilter::affectsTransparentBlack() was
inapplicable on most things except color filters, and its use on
leaf nodes was confusing. So I removed it, and made
SkImageFilter::canComputeFastBounds() virtual instead.
BUG=skia:4630
Review URL: https://codereview.chromium.org/1500923004
visual bench run on Mac Pro
curr/maxrss loops min median mean max stddev samples config bench
100/100 MB 16 412µs 413µs 413µs 414µs 0% ▄▁▇▄▄▄▄█▄▃▅ gpu warmupbench
101/102 MB 32 547µs 548µs 611µs 1.24ms 34% █▁▁▁▁▁▁▁▁▁▁ gpu image-filter-sprite-draw-image
102/103 MB 32 547µs 548µs 721µs 1.23ms 41% █▁▇▁▁█▁▁▁▁▁ gpu image-filter-sprite-draw-bitmap
103/103 MB 64 546µs 546µs 546µs 547µs 0% ▆▄▂▁▇█▅▇▅▇▃ gpu image-filter-sprite-draw-sprite
Should have no effect on Chrome while SK_SUPPORT_LEGACY_LAYER_BITMAP_IMAGEFILTERS is defined (which it is in chrome)
BUG=skia:1073
Review URL: https://codereview.chromium.org/1491293002
Reason for revert:
Introduced memory leak; pixel changes in Chrome.
Original issue's description:
> Matrix convolution bounds fix; affectsTransparentBlack fixes.
>
> Because the convolution kernel is (currently) applied in device space,
> there's no way to know which object-space pixels will be touched. So
> return false from canComputeFastBounds().
>
> The results from the matrixconvolution GM were actually wrong, since
> they were showing edge differences on the clip boundaries, where they
> should really only show on crop boundaries. I added a crop to the GM
> to keep the results the same (which are useful to test the different
> convolution tile modes).
>
> While I was at it, SkImageFilter::affectsTransparentBlack() was
> inapplicable on most things except color filters, and its use on
> leaf nodes was confusing. So I removed it, and made
> SkImageFilter::canComputeFastBounds() virtual instead.
>
> BUG=skia:
>
> Committed: https://skia.googlesource.com/skia/+/8705ec80518ef551994b82ca5ccaeb0241d6adecTBR=reed@google.com,reed@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1497083005
Because the convolution kernel is (currently) applied in device space,
there's no way to know which object-space pixels will be touched. So
return false from canComputeFastBounds().
The results from the matrixconvolution GM were actually wrong, since
they were showing edge differences on the clip boundaries, where they
should really only show on crop boundaries. I added a crop to the GM
to keep the results the same (which are useful to test the different
convolution tile modes).
While I was at it, SkImageFilter::affectsTransparentBlack() was
inapplicable on most things except color filters, and its use on
leaf nodes was confusing. So I removed it, and made
SkImageFilter::canComputeFastBounds() virtual instead.
BUG=skia:
Review URL: https://codereview.chromium.org/1500923004
This is more correct than using nextScanline() for the
SkGifCodec scanline decoder (since we will get a strange
result in the interlaced case) and is necessary if we want
to add scanline decoding to SkIcoCodec.
This does not actually fix bugs or change behavior.
BUG=skia:
Review URL: https://codereview.chromium.org/1489163002
The appropriate way to get the default system font is to pass |nullptr| as the
familyName. This was not clear from the interface, which may be why ui/gfx/ has
the wrong behavior.
BUG=chromium:564266
Review URL: https://codereview.chromium.org/1494253002
These sites don't necessarily need the full power of a GrRenderTarget object. This is a clean up for switching over to GrRenderTargetProxys.
Review URL: https://codereview.chromium.org/1486923004
This class allows a client of SkCodec to read chunks in the data
stream that are not recognized by libpng. This is used by Android
to specify ninepatch data.
Taken from SkImageDecoder::Peeker. Modify the name of the class
and its method to be more specific to their use. Make
SkImageDecoder::Peeker a subclass of the new class, to help stage
the change in Android.
Add a test to verify that it works.
BUG=skia:4574
BUG=skia:3257
Committed: https://skia.googlesource.com/skia/+/3389e00136188800b98ca69488c0418c374fd78b
Review URL: https://codereview.chromium.org/1040453002
Reason for revert:
Busted Chromium builds:
../../third_party/skia/src/ports/SkImageDecoder_empty.cpp:63:17: error: no type
named 'Peeker' in 'SkImageDecoder'
SkImageDecoder::Peeker* SkImageDecoder::setPeeker(Peeker*) {
~~~~~~~~~~~~~~~~^
../../third_party/skia/src/ports/SkImageDecoder_empty.cpp:63:51: error: unknown
type name 'Peeker'
SkImageDecoder::Peeker* SkImageDecoder::setPeeker(Peeker*) {
Original issue's description:
> Add SkPngChunkReader.
>
> This class allows a client of SkCodec to read chunks in the data
> stream that are not recognized by libpng. This is used by Android
> to specify ninepatch data.
>
> Taken from SkImageDecoder::Peeker. Modify the name of the class
> and its method to be more specific to their use. Make
> SkImageDecoder::Peeker a subclass of the new class, to help stage
> the change in Android.
>
> Add a test to verify that it works.
>
> BUG=skia:4574
> BUG=skia:3257
>
> Committed: https://skia.googlesource.com/skia/+/3389e00136188800b98ca69488c0418c374fd78bTBR=djsollen@google.com,reed@google.com,msarett@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4574
Review URL: https://codereview.chromium.org/1472863003
This class allows a client of SkCodec to read chunks in the data
stream that are not recognized by libpng. This is used by Android
to specify ninepatch data.
Taken from SkImageDecoder::Peeker. Modify the name of the class
and its method to be more specific to their use. Make
SkImageDecoder::Peeker a subclass of the new class, to help stage
the change in Android.
Add a test to verify that it works.
BUG=skia:4574
BUG=skia:3257
Review URL: https://codereview.chromium.org/1040453002
There may be other (better?) ways to enable this. For example, if we queried the device *before* we init our root DeviceCM, we wouldn't need this flag in InitFlags, since the device already has a virtual to opt-in ...
BUG=skia:
Review URL: https://codereview.chromium.org/1458153003
The new key for the distance field path cache will contain an
SkStrokeRec. This change guarantees that we don't have any hidden
padding that has garbage values, thereby preventing apparently
equal keys from hashing to two different values. This also has
the nice effect of reducing the size of SkStrokeRec from 24 bytes
to 16 bytes.
Review URL: https://codereview.chromium.org/1465773003
Add helper to track when a round rect was added to a path,
and then return the SkRRect specification that describes it.
Move the implementation for SkPath::RawIter to SkPathRef so it can be used there as well.
R=reed@google.com,robertphillips@google.com
Review URL: https://codereview.chromium.org/1461763004
DebugWriteToStderr isn't defined for Android. I'm not sure if I just didn't test compiling for Android or if this is due to a change in the base library.
BUG=skia:
No public API changes.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1438773003
Extend the SkPath API to allow specifying the contour starting point.
This will allow removing the explicit cubic code from Blink/Path.
BUG=chromium:315277
R=reed@google.com,caryclark@google.com
Review URL: https://codereview.chromium.org/1452203002
This shouldn't really make any difference but allocating and holding on to a GrRenderTarget for each test target generates image differences for Mali GPUs. This CL allows an existing render target to be used for the test target.
TBR=bsalomon@google.com
Review URL: https://codereview.chromium.org/1447113002
This will expose the BitmapRegionDecoder API as a public include
and move the implementation to src.
This makes this code more naturally exposed in Android and easier
to test in DM and nanobench.
BUG=skia:
Review URL: https://codereview.chromium.org/1438873002
SkChecksum::Compute is a very, very poorly distributed hash function.
This replaces all remaining uses with Murmur3.
The only interesting stuff is in src/gpu.
BUG=skia:
Review URL: https://codereview.chromium.org/1436973003
We were doing it on Windows, now do it everywhere.
This just changes the backend. We could think about another step to actually
replacing all our sk_atomic_... with std atomic stuff.
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-TSAN-Trybot
TBR=reed@google.com
Only deleting from include/...
Review URL: https://codereview.chromium.org/1441773002
Reason for revert:
Co-centered sample locations are not needed to do stencil clip with mixed samples
Original issue's description:
> Implement stencil clipping in mixed sampled render targets
>
> This change enables multisampled clipping for mixed sampled
> render targets. Previously clipping in mixed samples config
> behaved the same as in the gpu config.
>
> In order to retrofit non-MSAA draw methods, programmable sample
> locations are used in order to colocate all samples at (0.5, 0.5).
> Requires support for NV_sample_locations.
>
> BUG=skia:4399
>
> Committed:
> https://skia.googlesource.com/skia/+/3e77ba96d56d15db30ac6d8ccb900e30aafcbb16
BUG=skia:
Review URL: https://codereview.chromium.org/1415873011
Reason for revert:
Co-centered sample locations are not needed to do stencil clip with mixed samples.
Original issue's description:
> Fix setColocatedSampleLocations on ES and GL < 4.5
>
> Updates setColocatedSampleLocations to use glFramebufferParameteri
> when
> the DSA version glNamedFramebufferParameteri is not present.
>
> BUG=skia:
>
> Committed:
> https://skia.googlesource.com/skia/+/98cad6219b430eddf5528473311279f21dbd2e10
BUG=skia:
Review URL: https://codereview.chromium.org/1420883007
Reason for revert:
Co-centered sample locations are not needed to do stencil clip with mixed samples.
Original issue's description:
> Fix mixed samples stencil clip
>
> Fixes rendering bugs and nondeterminism in gm.
>
> Before, mixed samples stencil clip would try to infer whether the draw
> wanted co-centered sample locations from within GrGLGpu, which caused
> various errors. This change reworks it so the draw itself can request
> the co-centered sample locations when it knows it will need them.
>
> Also reduces framebuffer binds by moving the code that enables
> GL_FRAMEBUFFER_PROGRAMMABLE_SAMPLE_LOCATIONS into flushRenderTarget.
>
> Committed: https://skia.googlesource.com/skia/+/14184d5567b58085b6d8a6375796d405056f7f73TBR=bsalomon@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1407063011
Fixes rendering bugs and nondeterminism in gm.
Before, mixed samples stencil clip would try to infer whether the draw
wanted co-centered sample locations from within GrGLGpu, which caused
various errors. This change reworks it so the draw itself can request
the co-centered sample locations when it knows it will need them.
Also reduces framebuffer binds by moving the code that enables
GL_FRAMEBUFFER_PROGRAMMABLE_SAMPLE_LOCATIONS into flushRenderTarget.
Review URL: https://codereview.chromium.org/1431593006
Quits requiring EXT_raster_multisample and
NV_sample_mask_override_coverage for mixed samples support. This will
allow platforms without those latter extensions (i.e. Chrome) to still
use mixed samples for path rendering. Also moves the mixed samples cap
out of shader caps, since it no longer denotes shader functionality.
BUG=skia:
Review URL: https://codereview.chromium.org/1410383011
There seem about a zillion possible ways to slice this.
This adds and uses SkMallocPixelRef::ZeroedPRFactory.
I'm not married to it.
This appears to clear up a hot spot in the benchmark referenced in this bug:
BUG=516426
I'm not confident enough on Windows to declare that definitively yet.
It probably helps all other non-opaque layers too. Possibly significantly.
So I don't forget, I profiled this:
out/Release/performance_browser_tests.exe --gtest_filter=TabCapturePerformanceTest.Performance/2 --single-process
No diffs:
https://gold.skia.org/search2?issue=1430593007&unt=true&query=source_type%3Dgm&master=falseTBR=reed@google.com
Review URL: https://codereview.chromium.org/1430593007
Make the struct passed to SkAndroidCodec::getAndroidPixels const. This
matches SkCodec, and makes sense, since it is not used as an output.
Brought up in crrev.com/1417583009
Review URL: https://codereview.chromium.org/1411693005
Updates setColocatedSampleLocations to use glFramebufferParameteri when
the DSA version glNamedFramebufferParameteri is not present.
BUG=skia:
Review URL: https://codereview.chromium.org/1415503008
This allows internal Gr texture creation code to succeed for extraneous textures while running the bleed GM. This means we can turn on the shader variants.
Review URL: https://codereview.chromium.org/1418473004
Use DumpStackTrace in SkASSERT in GOOGLE3.
There are extra assertions enabled in debug mode that cause RecordDraw_TextBounds to fail.
New include causes a naming conflict with global name "base".
Corresponding internal cl/106495354
No public API changes.
TBR=reed@google.com
BUG=skia:
Review URL: https://codereview.chromium.org/1423013004
Logically this CL:
Moves the PathRendererChain from GrContext to GrDrawManager
- this was needed to untangled the Path-Chain/Renderer header mess
- this entailed adding getDrawingMgr so the CMM could access the PathRenderingChain
- this also entailed re-adding freeGpuResources to the GrDrawingMgr
Moves the CanDrawArgs struct up stack
Removes the GrPipelineBuilder from the CanDrawArgs struct
Review URL: https://codereview.chromium.org/1407883004
Motivation: This will be easier than adding a friend every time I want
to create a one-off SkCanvas subclass or SkRemote::Encoder subclass.
See also: SkPath::Iter.
Review URL: https://codereview.chromium.org/1411723005
Reason for revert:
Logic may be incorrect
Original issue's description:
> Fix ClipMaskManager's SW-fallback logic
>
>
> 'useSWOnlyPath' was not correctly toggling between stencil and color draws so there was a mismatch with the behavior in createAlphaClipMask (i.e., we were inadvertently rendering some of the elements in a clip using SW but using stenciling for others - precisely what 'useSWOnlyPath' was intended to prevent).
>
> Committed: https://skia.googlesource.com/skia/+/5c3ea4cd3921e8904d4f201bcdedfd5b8a726542TBR=bsalomon@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1426443008
'useSWOnlyPath' was not correctly toggling between stencil and color draws so there was a mismatch with the behavior in createAlphaClipMask (i.e., we were inadvertently rendering some of the elements in a clip using SW but using stenciling for others - precisely what 'useSWOnlyPath' was intended to prevent).
Review URL: https://codereview.chromium.org/1421533007
- Move high-precision wall timers from tools/timer to SkTime.
- Implement SkTime::GetMSecs() in terms of SkTime::GetNSecs().
- Delete unused tools/timer code.
I have no idea what's going on there in src/animator.
I don't intend to investigate.
BUG=skia:
Committed: https://skia.googlesource.com/skia/+/70084cbc16ee8162649f2601377feb6e49de0217
CQ_EXTRA_TRYBOTS=client.skia.compile:Build-Ubuntu-GCC-x86_64-Debug-CrOS_Link-Trybot
Review URL: https://codereview.chromium.org/1422513003
Reason for revert:
broke chromeos
Original issue's description:
> SkTime::GetNSecs()
>
> - Move high-precision wall timers from tools/timer to SkTime.
> - Implement SkTime::GetMSecs() in terms of SkTime::GetNSecs().
> - Delete unused tools/timer code.
>
> I have no idea what's going on there in src/animator.
> I don't intend to investigate.
>
> BUG=skia:
>
> Committed: https://skia.googlesource.com/skia/+/70084cbc16ee8162649f2601377feb6e49de0217TBR=reed@google.com,mtklein@google.com,mtklein@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1420923003
- Move high-precision wall timers from tools/timer to SkTime.
- Implement SkTime::GetMSecs() in terms of SkTime::GetNSecs().
- Delete unused tools/timer code.
I have no idea what's going on there in src/animator.
I don't intend to investigate.
BUG=skia:
Review URL: https://codereview.chromium.org/1422513003
As we use this more and more, we end up with more and more inline copies.
On my desktop, this makes Skia ~16K smaller.
Boy perf trybots would be neat.
BUG=skia:
Review URL: https://codereview.chromium.org/1415133003
We will implement this API using SkCodecs.
SkAndroidCodecs will be used to implement the
BitmapRegionDecoder Java API (and possibly
BitmapFactory).
BUG=skia:
Review URL: https://codereview.chromium.org/1406223002
Passing &SkGoodHash to SkTHashMap and SkTHashSet doesn't guarantee that it's actually instantiated. Using a functor does.
BUG=skia:
Review URL: https://codereview.chromium.org/1405053002
This method is different from MatrixFilter, in that MatrixFilter does not require a pre-existing
filter, but LocalM does. Also change the comment to be more general, as there is no promise that
we return a different subclass, and certainly not a specific subclass.
This pattern of obj->newWithModifiers() also more closely matches the pattern in SkImage (newSubset).
BUG=skia:
Review URL: https://codereview.chromium.org/1402133002
At draw time, this filter simply concatenates the given matrix to the
CTM, and recurses on its input. The matrix is thus applied to any
upstream filter parameters and crop rects.
BUG=skia:
Review URL: https://codereview.chromium.org/1392833005
Fix a crash in dm when run with Chromium command buffer driver.
Also removes glCopyTextureCHROMIUM, it does not seem to be used.
This is removed on the grounds that it would need similar change,
if it was used. The variable fCopyTextureCHROMIUM does not seem to
be populated in the Chromium side, either.
BUG=skia:2992
Review URL: https://codereview.chromium.org/1389213004
This CL allows the SkScanlineDecoder to decode partial
scanlines.
This is a first step in efficiently implementing subsetting
in SkScaledCodec.
BUG=skia:4209
Review URL: https://codereview.chromium.org/1390213002
Result:
- clients can get a filtered version of an image without having to setup a temp drawing environment
- for some cases, the process is more efficient even than (deprecated) drawSprite, since there is no need to draw/copy the result
Impl:
- made Proxy virtual so we don't need to have an existing device to use it
This, in conjunction with LocalMatrixImageFilter, should allow us to simplify and optimize ApplyImageFilter() in cc/output/gl_renderer.cc
BUG=skia:
Review URL: https://codereview.chromium.org/1390913005
Rather than implementing some sort of "fill" in every
SkCodec subclass for incomplete images, let's make the
parent class handle this situation.
This includes an API change to SkCodec.h
SkCodec::getScanlines() now returns the number of lines it
read successfully, rather than an SkCodec::Result enum.
getScanlines() most often fails on an incomplete input, in
which case it is useful to know how many lines were
successfully decoded - this provides more information than
kIncomplete vs kSuccess. We do lose information when the
API is used improperly, as we are no longer able to return
kInvalidParameter or kScanlineNotStarted.
Known Issues:
Does not work for incomplete fFrameIsSubset gifs.
Does not work for incomplete icos.
BUG=skia:
Review URL: https://codereview.chromium.org/1332053002
per-glyph GPU path object, but rather store a key for looking it up in
the resource cache. This allows the cache to purge glyphs when needed.
Also indirectly fixes a memory leak that was introduced with nvpr text
blobs.
BUG=skia:
Review URL: https://codereview.chromium.org/1374853004
We landed this originally with lazily-correct sequentially-consistent memory
order. It turns out that's regressed performance, we think particularly when
recording paths. We also think there's no need for anything but relaxed memory
order here.
We should see this chart go down if all goes well: https://perf.skia.org/#4329
There are also Chrome performance charts to watch in the linked bug.
BUG=chromium:537700
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Release-TSAN-Trybot,Test-Ubuntu-GCC-Golo-GPU-GT610-x86_64-Release-TSAN
No public API changes.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1393833003
Reason for revert:
Breaks Chrome with this link error: ../../third_party/skia/include/effects/SkMorphologyImageFilter.h:75: error: undefined reference to 'SkMorphologyImageFilter::SkMorphologyImageFilter(int, int, SkImageFilter*, SkImageFilter::CropRect const*)'
../../third_party/skia/include/effects/SkMorphologyImageFilter.h:104: error: undefined reference to 'SkMorphologyImageFilter::SkMorphologyImageFilter(int, int, SkImageFilter*, SkImageFilter::CropRect const*)'
Presumably due to code in third_party/WebKit/Source/platform/graphics/filters/FEMorphology.cpp that contains:
#include "SkMorphologyImageFilter.h"
...
if (m_type == FEMORPHOLOGY_OPERATOR_DILATE)
return adoptRef(SkDilateImageFilter::Create(radiusX, radiusY, input.get(), &rect));
return adoptRef(SkErodeImageFilter::Create(radiusX, radiusY, input.get(), &rect));
Original issue's description:
> factories should return baseclass, allowing the impl to specialize
>
> waiting on https://codereview.chromium.org/1386163002/# to land
>
> BUG=skia:4424
>
> Committed: https://skia.googlesource.com/skia/+/80a6dcaa1b757826ed7414f64b035d512d9ccbf8TBR=senorblanco@google.com,robertphillips@google.com,reed@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4424
Review URL: https://codereview.chromium.org/1389063002
This CL moves the allocation and storage of the GrTextContexts into the DrawingManager. The GrDrawContexts now just get their GrTextContext from the DrawingManager.
Review URL: https://codereview.chromium.org/1375153007
Prior to this CL, each SkCodec subclass that allows sampling does an
extra check in onStartScanlineDecode to determine whether the X dimension
is supported for sampling. Remove this check, and provide a way for
SkScaledCodec to directly access the SkSwizzler, and update it to do
sampling. This way, the SkCodec knows nothing of sampling, but we can
still save the extra step of sampling afterwards.
FIXME: SkBmpRLECodec still calls SkScaledCodec::DimensionsSupported. It
seems like it could directly support sampling, rather than dealing with
SkScaledCodec (partially).
Add a new base class for SkSwizzler. It allows updating the swizzler
after it was created, which is done by SkScaledCodec. Modify SkSwizzler's
constructor/factory function to stop taking any info about sampling,
assume the sample size is one, and move modifying that into a virtual
function overridden from the base class.
BUG=skia:4284
Review URL: https://codereview.chromium.org/1372973002
To further consolidate the various unique owning classes, this bases
SkAutoTUnref on skstd::unique_ptr. Users are updated because of two
breaking changes, swap now takes a reference and reset no longer
returns its argument.
Review URL: https://codereview.chromium.org/1370803002
This change enables multisampled clipping for mixed sampled
render targets. Previously clipping in mixed samples config
behaved the same as in the gpu config.
In order to retrofit non-MSAA draw methods, programmable sample
locations are used in order to colocate all samples at (0.5, 0.5).
Requires support for NV_sample_locations.
BUG=skia:4399
Review URL: https://codereview.chromium.org/1232103002
Rather than calling it in each subclass, call it once in the base
class. Call it first, since other steps may modify internal structures
which would be replaced by a call to onRewind.
BUG=skia:4284
Review URL: https://codereview.chromium.org/1381483002
Benefits:
- This mimics other decoding APIs (including the ones SkCodec relies
on, e.g. a png_struct, which can be used to decode an entire image or
one line at a time).
- It allows a client to ask us to do what we can do efficiently - i.e.
start from encoded data and either decode the whole thing or scanlines.
- It removes the duplicate methods which appeared in both SkCodec and
SkScanlineDecoder (some of which, e.g. in SkJpegScanlineDecoder, just
call fCodec->sameMethod()).
- It simplifies moving more checks into the base class (e.g. the
examples in skbug.com/4284).
BUG=skia:4175
BUG=skia:4284
=====================================================================
SkScanlineDecoder.h/.cpp:
Removed.
SkCodec.h/.cpp:
Add methods, enums, and variables which were previously in
SkScanlineDecoder.
Default fCurrScanline to -1, as a sentinel that start has not been
called.
General changes:
Convert SkScanlineDecoders to SkCodecs.
General changes in SkCodec subclasses:
Merge SkScanlineDecoder implementation into SkCodec. Most (all?) owned
an SkCodec, so they now call this-> instead of fCodec->.
SkBmpCodec.h/.cpp:
Replace the unused rowOrder method with an override for
onGetScanlineOrder.
Make getDstRow const, since it is called by onGetY, which is const.
SkCodec_libpng.h/.cpp:
Make SkPngCodec an abstract class, with two subclasses which handle
scanline decoding separately (they share code for decoding the entire
image). Reimplement onReallyHasAlpha so that it can return the most
recent result (e.g. after a scanline decode which only decoded part
of the image) or a better answer (e.g. if the whole image is known to
be opaque).
Compute fNumberPasses early, so we know which subclass to instantiate.
Make SkPngInterlaceScanlineDecoder use the base class' fCurrScanline
rather than a separate variable.
CodexTest.cpp:
Add tests for the state changes in SkCodec (need to call start before
decoding scanlines; calling getPixels means that start will need to
be called again before decoding more scanlines).
Add a test which decodes in stripes, currently only used for an
interlaced PNG.
TODO: Add tests for onReallyHasAlpha.
Review URL: https://codereview.chromium.org/1365313002
SkGlyphCache dumps too many glyphs, and to reduce the trace size,
RequestDetails enum is added to SkTraceMemoryDump interface. This
would tell caches to dump only requested details or not a detailed
dump.
BUG=499731
Review URL: https://codereview.chromium.org/1310123007
Reason for revert:
Landed PS8 temporarily to trigger the perf bots.
Original issue's description:
> Implement SkImageFilter::Cache with SkResourceCache.
>
> The single global cache now uses the global SkResourceCache,
> and any Create()ed cache uses a local SkResourceCache.
>
> No real public API changes (and only deletes).
>
> I don't see any pixel diffs on .skps or GMs.
> Don't see any significant perf difference on 8888 or gpu configs.
> DM peak memory usage did drop by about 113M, close to the 128M cache size.
>
> BUG=skia:3662
>
> Landing PS8 temporarily to trigger the perf bots.
> TBR=reed@google.com
>
> Committed: https://skia.googlesource.com/skia/+/75135d8ae1aa12e8e6bfce63291e5e876a77546fTBR=reed@google.com,robertphillips@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:3662
Review URL: https://codereview.chromium.org/1381523002
The single global cache now uses the global SkResourceCache,
and any Create()ed cache uses a local SkResourceCache.
No real public API changes (and only deletes).
I don't see any pixel diffs on .skps or GMs.
Don't see any significant perf difference on 8888 or gpu configs.
DM peak memory usage did drop by about 113M, close to the 128M cache size.
BUG=skia:3662
Landing PS8 temporarily to trigger the perf bots.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1370323002
An alternative way of addressing this is to alter SkCanvas::drawRoundRect to just reject isEmpty (i.e., un-sorted or truly empty) input rects.
BUG=skia:3786
Review URL: https://codereview.chromium.org/1373293002
- use C++11 features ({} init, move constructors) to eliminate the need
for explicit constructors
- collapse RECORD0...RECORD8 into just one RECORD macro
- explicitly tag record types instead of using member detectors.
Removing member detectors makes this code significantly less fragile.
This exposes a few places where we didn't really think through what to do
with SkDrawable. I've marked them TODO for now.
BUG=skia:
Review URL: https://codereview.chromium.org/1360943003
Reason for revert:
Need to somehow get access to encoders in chrome -- link error on the roll since SkImageEncoder is not built as part of chrome.
Original issue's description:
> change pixel-serializer to support reencoding existing data
>
> Trying to evolve this interface so it can
> - support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
> - allow for encoding images as well as bitmaps (e.g. for picture serialization)
> - perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
>
> BUG=skia:
>
> Committed: https://skia.googlesource.com/skia/+/13f48dc85aa68a60da66aaf39c93d527d11d1278TBR=scroggo@google.com,msarett@google.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1371983003
Trying to evolve this interface so it can
- support rich set of backend-encoders (including ones like ETC1 that can cheaply convert to KXT
- allow for encoding images as well as bitmaps (e.g. for picture serialization)
- perhaps replace SkImageEncoder as an API (assuming we create a factory that returns a serializer given a format)
BUG=skia:
Review URL: https://codereview.chromium.org/1373683003
One side effect is that the SkShader's (or implicit shader's) fragment processor is responsible for the transition from an unpremul paint color to a premul color.
Review URL: https://codereview.chromium.org/1348583002
To avoid breaking existing SKPs, add a deserialization stub which
unflattens SkBitmapSource records to SkImageSources.
R=reed@google.com,mtklein@google.com,robertphillips@google.com
Review URL: https://codereview.chromium.org/1363913002
The Registrar class is unnecessary, as SkFlattenable factory
registration is now handled via initialization routines that can just
call the Register function directly.
Also, no need to lazily initialize gCount to 0, as initializing an int
to a constant value does not require dynamic initialization. (C++
actually guarantees zero initialization of global ints anyway, but
existing practice in Skia appears to favor the explicit "= 0").
Relatedly, this requires removing the unused/unimplemented
SkLayerDrawLooper::MyRegistrar class. And removing that allows Clang
to realize that SkLayerDrawLooper::fTopRec is unneeded too, so remove
that too to squelch the compiler warning/error.
This doesn't change any public API.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1361323002
This implementation improves performance of SkMutex acquire / release pair from 42ns -> 13 ns.
SkSharedMutex and SkSpinlock have the same performance.
It also removes specialized windows and linux/mac code.
BUG=skia:
Review URL: https://codereview.chromium.org/1359733002
Motivation: I want too finalize this API before working on the more
complex problem of adding XMP metadata for PDF/A.
BUG=skia:3110
Review URL: https://codereview.chromium.org/1359943003
This CL removes the uses of SkNEW that have resprouted since commit
385fe4d, and removes the macros entirely now that Android and Chromium
have been cleaned up to no longer depend on them.
A bunch of files implicitly depend on #include <new> from SkPostConfig.h
still though, so keep that for now. To be fixed in a followup CL.
[mtklein mucking around]
Only public API removed.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1360653004
Reason for revert:
Who wants to land forever?
Original issue's description:
> update memset16/32 inlining heuristics
>
> I spent some time looking at perf.skia.org and it looks like we can do better.
>
> It is weird, weird, weird that on x86, we see three completely different behaviors:
> - x86 Android: inlining better for small N, custom better for large N;
> - Windows: inlining better for large N, custom better for small N;
> - other x86: inlining generally better
>
> BUG=skia:4316,chromium:516426
>
> (Temporary, plan to revert.)
> TBR=reed@google.com
>
> Committed: https://skia.googlesource.com/skia/+/b68fa409fc00ce2f38e2a0fd6f9dc2379b372481TBR=reed@google.com,jcgregorio@google.com,mtklein@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:4316,chromium:516426
Review URL: https://codereview.chromium.org/1358793002
I spent some time looking at perf.skia.org and it looks like we can do better.
It is weird, weird, weird that on x86, we see three completely different behaviors:
- x86 Android: inlining better for small N, custom better for large N;
- Windows: inlining better for large N, custom better for small N;
- other x86: inlining generally better
BUG=skia:4316,chromium:516426
(Temporary, plan to revert.)
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1357193002
Remove some bogus tests on the cache, as they are not thread-reliable. Running w/ discardable these are racy.
BUG=532981
Review URL: https://codereview.chromium.org/1351453004
The new FP is used to implement SkXM::Mode color filters and SkXM::Mode image filters. Also, these now support all advanced SkXM::Mode xfermodes.
Review URL: https://codereview.chromium.org/1334293003
Adds an entry point to GrContext to allow enumeration and tracing of GPU resources
via the newly added SkTraceMemoryDump.
Plan is for Chrome to call this on each of its GrContexts.
Dumps both the total size of GPU resources, as well as the total purgeable size.
BUG=526261
Review URL: https://codereview.chromium.org/1313743002
This makes the blurcircles bench go from ~33us to ~8us on Windows desktop.
It will require layout test suppressions
Review URL: https://codereview.chromium.org/1311583005
Blink is migrating away from SkBitmaps, so we need an SkImage-based
SkImageFilter source. This is pretty much a 1-1 equivalent of
SkBitmapSource.
To avoid duplication, relocate the SkImage deserialization logic
from SkPictureData to SkReadBuffer.
R=reed@google.com,robertphillips@google.com,senorblanco@chromium.org
Review URL: https://codereview.chromium.org/1343703005
The new flow of calls for attaching a Stencil looks like:
Client
rt->attachStencilAttachment()
gpu->getStencilAttachment()
glgpu->createStencilAttachment()
glrt->completeStencilAttachment() //actually attaches
BUG=skia:
Review URL: https://codereview.chromium.org/1333383002
Possible follow-up changes to consider
1. Roll SkImage_Raster and _Gpu into _Generator, where the generator (or cacherator) is backed by a pre-existing texture or raster.
2. Evolve SkImageUsageType into a verb requiring stretching, and have the caller (common code) digest the caps() and usage, so that subclasses are just told what to do (stretch or not)
3. Common code/utility to convert an unstretched texture into a stretch one (and cache it) if the generator can only make an unstretched one.
BUG=skia:
Review URL: https://codereview.chromium.org/1282363002
This was a pre-SkOpts attempt that we can bring under its wing now.
This should be a perf no-op, deo volente.
BUG=skia:4117
Review URL: https://codereview.chromium.org/1314863006
SkOncePtr<T[]> is identical to SkOncePtr<T> except we'll default to delete[]
for cleanup.
CQ_EXTRA_TRYBOTS=client.skia:Test-Ubuntu-GCC-GCE-CPU-AVX2-x86_64-Debug-ASAN-Trybot
BUG=skia:
No public API changes.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1311893010
Reason for revert:
Breaks Chrome roll.
obj/skia/ext/skia_chrome.skia_memory_dump_provider.o
does not have -I include/private on its include path, but transitively includes SkMessageBus.h.
Original issue's description:
> Port uses of SkLazyPtr to SkOncePtr.
>
> This gives SkOncePtr a non-trivial destructor that uses std::default_delete
> by default. This is overrideable, as seen in SkColorTable.
>
> SK_DECLARE_STATIC_ONCE_PTR still just leaves its pointers hanging at EOP.
>
> BUG=skia:
>
> No public API changes.
> TBR=reed@google.com
>
> Committed: https://skia.googlesource.com/skia/+/a1254acdb344174e761f5061c820559dab64a74cTBR=herb@google.com,mtklein@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=skia:
Review URL: https://codereview.chromium.org/1334523002
This gives SkOncePtr a non-trivial destructor that uses std::default_delete
by default. This is overrideable, as seen in SkColorTable.
SK_DECLARE_STATIC_ONCE_PTR still just leaves its pointers hanging at EOP.
BUG=skia:
No public API changes.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1322933005
Image encoding may fail during serialization, resulting in zero-length
encoded data in the SKP.
Instead of invalidating the stream (and preventing deserialization of
the whole picture) we can instantiate placeholder images.
BUG=skia:4285
R=reed@google.com,robertphillips@google.com
Review URL: https://codereview.chromium.org/1308273011
It is easy to think in some cases that SkString::resize(int) is not
destructive, since optimizations mean that most of the time the data
is still there after a resize. However, in the general case, the
original string's data is lost and the new SkString contains garbage.
Review URL: https://codereview.chromium.org/1304833004
The million SKPs generated require >5T of storage. A good deal
of that are copies of system fonts.
Chrome built with
#DEFINE SK_WHITELIST_SERIALIZED_TYPEFACES
will omit the font data if the font matches a precomputed
checksum.
The captured SKP prepends sk_ to the names of fonts that
have their data omitted. The SKP consumer can either add
renamed fonts from the recording machine, or add
gDeserializeTypefaceDelegate = WhitelistDeserializeTypeface;
which strips the sk_ prefix when deserializing typefaces.
whitelist_typefaces --check
Computes the checksums of fallback
fonts and returns 0 if the checksums match the checked-in
file SkWhitelistChecksum.cpp.
whitelist_typefaces --generate
Writes an updated version of SkWhitelistChecksum.cpp.
(Added Mike since this modifies a public header)
R=bungeman@google.com,rmistry@google.com,reed@google.com
Review URL: https://codereview.chromium.org/1317913005
Redesigns SkScanlineDecoder.h to indicate the ordering
in which the scanlines are provided
Refactors SkSwizzler::Fill() to include the zeroInit check
and to actually be correct.
BUG=skia:3257
BUG=skia:4198
Review URL: https://codereview.chromium.org/1287423002
This change regularizes Skia's type traits so that when <type_traits>
can finally be used the transition is easier. Various traits are
renamed to match <type_traits> and placed in the skstd namespace.
Current users of these traits are updated.
Review URL: https://codereview.chromium.org/1317593004
This macro was responsible for producing code like:
static SkAlignedStorage<sizeof(Foo)> g_gFoo_Storage;
static Foo* gFoo = new(g_gFoo_Storage.get()) Foo;
static SkAutoTDestroy<Foo> gFoo_ad(gFoo);
which would allocate static storage for an object of type Foo
(g_gFoo_Storage), lazily instantiate the object in that memory (via
gFoo's initializer), and then ensure that at global destruction time
the object is destroyed (via gFoo_Ad's destructor).
However, the exact same effect is achieved by just writing:
static Foo gFoo;
Review URL: https://codereview.chromium.org/1314763009
Dump the memory statistics of resource cache and glyph cache using the
SkTraceMemoryDump interface.
BUG=chromium:503168
Review URL: https://codereview.chromium.org/1313793004
Re-land; layout tests are suppressed and gm differences are understood.
A merge conflict prevented a automatic reland.
If the endcap is not butt, draw the endcaps even when the line
has zero length.
If the dash length is zero, generate a zero length line segment.
Treat a move followed by a close as a move followed by a zero-length
line.
TBR=reed@google.com
BUG=422974
Review URL: https://codereview.chromium.org/1314213002
Unfortunately, immintrin.h (which is also included by SkTypes)
includes xmmintrin.h which includes mm_malloc.h which includes
stdlib.h for malloc even though, from the implementation, it is
difficult to see why.
Fortunately, arm_neon.h does not seem to be involved in such
shenanigans, so building for Android will keep things sane.
TBR=reed@google.com
Doesn't change Skia API, just moves an include.
Review URL: https://codereview.chromium.org/1313203003
The motivation for this was to remove SK_OFFSETOF from SkTypes, but
this CL is mostly about cleaning up our use of offsetof generally.
SK_OFFSETOF is removed to SkTypes and added to the two places it is
actually used (for the non standard behavior of finding the offset of
fields in types which are not standard layout).
Older versions of gcc required POD for offsetof to be used without
warning. Newer versions require the more relaxed standard layout.
Now that we no longer build on older versions of gcc, remove the
old warning suppressions.
PODMatrix is renamed to AggregateMatrix. SkMatrix is already POD
(trivial and standard layout). The PODMatrix name implies that the
POD-ness is needed for the offsetof, but it is actually the aggregate
attribute which is needed for compile time constant initialization.
This makes it more obvious that this can be revisited after we can
rely on constexpr constructors.
This also adds skstd::declval since this allows removal of existing
awkward code which casts a constant to a pointer to find the size of
a field.
TBR=reed@google.com
No API change, only removes unused macro.
Review URL: https://codereview.chromium.org/1309523003
Looks like the -Wmicrosoft warnings in the bug are coming up specificically
because many the effects in SkLightingImageFilter are defined inside an
anonymous namespace (spanning, I think, lines 33-702 today).
BUG=skia:4091
No public API changes.
TBR=reed@google.com
Review URL: https://codereview.chromium.org/1311783004
CL (1 of 3) adds empty lists in our .gypi,
and builds the files in those empty lists with the appropriate flags.
CL (2 of 3) will have Chrome's GYP and GN files read these lists,
and build them with the appropriate flags.
CL (3 of 3) will add runtime detection and stub files to the lists
with empty Init_sse42(), Init_avx(), Init_avx2() methods.
After that, we should be able to use SSE 4.2, AVX, and AVX2 if desired.
Some motivation:
- SSE 4.2 adds some sweet string-oriented methods that
can help us write fast high quality 32-bit hashes.
- AVX is SSE doubled, e.g. 8 floats or two SkPMFloat at a time.
- AVX2 is SSE2 doubled, e.g. 8 pixels at a time.
BUG=skia:4117
Review URL: https://codereview.chromium.org/1290423007
Reason for revert:
More GMs changed than I expected. Will probably affect layout tests as well; reverting until I can verify that the changes are correct.
Original issue's description:
> experiment with zero-length round capped line segments
>
> If the endcap is not butt, draw the endcaps even when the line
> has zero length.
>
> If the dash length is zero, generate a zero length line segment.
>
> Treat a move followed by a close as a move followed by a zero-length
> line.
>
> R=reed@google.com,schenney@google.com
> BUG=422974
>
> Committed: https://skia.googlesource.com/skia/+/dd3c165828fffb369d0f4b13b48381169a0249a9TBR=reed@google.com,schenney@google.com,schenney@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=422974
Review URL: https://codereview.chromium.org/1304163008
If the endcap is not butt, draw the endcaps even when the line
has zero length.
If the dash length is zero, generate a zero length line segment.
Treat a move followed by a close as a move followed by a zero-length
line.
R=reed@google.com,schenney@google.com
BUG=422974
Review URL: https://codereview.chromium.org/1309753002
Reason for revert:
This causes a syntax error.
http://build.chromium.org/p/tryserver.chromium.mac/builders/mac_chromium_compile_dbg_ng/builds/87819/steps/compile%20%28with%20patch%29/logs/stdio
Original issue's description:
> Implement canComputeFastBounds() for image filters.
>
> Image filters have never implemented this check, which means that
> filters which affect transparent black falsely claim they can compute
> their bounds.
>
> Implemented an affectsTransparentBlack() virtual for image
> filters, and a similar helper function for color filters.
>
> This will affect the following GMs: imagefiltersscaled
> (lighting, perlin noise now filter to clip),
> colorfilterimagefilter (new test case), imagefiltersclipped
> (perlin noise now filters to clip).
>
> Note: I de-inlined SkPaint::canComputeFastBounds() to avoid adding
> a dependency from SkPaint.h to SkImageFilter.h.h. Skia benches show
> no impact from this change, but will watch the perf bots carefully.
>
> BUG=4212
>
> Committed: https://skia.googlesource.com/skia/+/915881fe743f9a789037695f543bc6ea189cd0cbTBR=reed@google.com,senorblanco@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=4212
Review URL: https://codereview.chromium.org/1300403003
Image filters have never implemented this check, which means that
filters which affect transparent black falsely claim they can compute
their bounds.
Implemented an affectsTransparentBlack() virtual for image
filters, and a similar helper function for color filters.
This will affect the following GMs: imagefiltersscaled
(lighting, perlin noise now filter to clip),
colorfilterimagefilter (new test case), imagefiltersclipped
(perlin noise now filters to clip).
Note: I de-inlined SkPaint::canComputeFastBounds() to avoid adding
a dependency from SkPaint.h to SkImageFilter.h.h. Skia benches show
no impact from this change, but will watch the perf bots carefully.
BUG=4212
Review URL: https://codereview.chromium.org/1296943002
SkTemplates.h contains a number of Skia specific utilities which are
not designed for external use. In addition to reducing the external
support burden, this will allow Skia to freely refactor this file.
Review URL: https://codereview.chromium.org/1272293004
This also:
makes the SkLightingShader handle normal maps where the rects aren't aligned between the diffuse and normal maps.
adds a light aggregating class (Lights) to SkLightingShader (along with a Builder nested class).
Split out of https://codereview.chromium.org/1261433009/ (Add SkCanvas::drawLitAtlas call)
Review URL: https://codereview.chromium.org/1291783003
By adding a cast to SK_ARRAY_COUNT, the compiler treats the
compile-time value as if it were a const int, and like regular
numbers, permits it to be compared to signed and unsigned
numbers freely.
R=reed@google.com
Review URL: https://codereview.chromium.org/1299943002
We don't want to test small images on Gold because they are
not interested to look at. Instead, I wrote a unit test to
verify that scaling small images does not cause crashes.
BUG=skia:
Review URL: https://codereview.chromium.org/1287863004
Old flow to serialize a picture:
1) serialize picture ops
2) serialize all sub pictures recursively
3) flatten the rest of this picture into a buffer, deduping flattenable factories and typefaces as we go
4) serialize the factories and typefaces
5) serialize the bytes from 3)
This allows the data in step 5) to refer to the deduplicated factories and typefaces from step 4). But, each sub picture in step 2) is completely siloed, so they can't dedup with the parent picture or each other.
New flow:
1) serialize picture ops
2) flatten the rest of this picture into a buffer, deduping flattenable factories and typefaces as we go
3) dummy-serialize sub pictures into /dev/null, with the effect of adding any new typefaces to our dedup set
4) serialize the factories and typefaces
5) serialize the bytes from 2)
6) serialize all sub pictures recursively, with perfect deduplication because of step 3).
Now all typefaces in the top-level picture and all sub pictures recursively should end up deduplicated in the top-level typeface set.
Decoding changes are similar: we just thread through the top-level typefaces to the sub pictures. What's convenient / surprising is that this new code correctly reads old pictures if we just have each picture prefer its local typeface set over the top-level one: old pictures always just use their own typefaces, and new pictures always use the top-level ones.
BUG=skia:4092
Review URL: https://codereview.chromium.org/1233953004
Added comment about how computeInvariantOutput() is non-recursive in GrFragmentProcessor
Made isEqual() recursive in GrFragmentProcessor
BUG=skia:4182
Review URL: https://codereview.chromium.org/1287343005
Fixed wrong indent
Changed auto child advance back to backwards linear search for getting subset of coords and samplers array of a child
Used offset from parent instead of backwards linear search to find a child proc's coords and transforms in Auto...Advance
append mangleString to variable name in nameVariable()
BUILDS! Added AutoFragmentChildProcAdvance class; fixed a few errors from previous commits
BUG=skia:4182
Review URL: https://codereview.chromium.org/1286293002
Currently, SkPaintFilterCanvas does not provide any help in cloning
target canvas state. While that could be handled in subclasses, it is
easy to miss (see linked bug).
This CL adds a new constructor variant which ensures that the initial
matrix and clip bounds are inherited from the target canvas.
BUG=516790
R=reed@google.com,robertphillips@google.com
Review URL: https://codereview.chromium.org/1294013002
To do this, create SkImageCacherator, which wraps a generator and provides an
interface to get a cached answer for either the raster or texture output of
the generator.
BUG=skia:
Review URL: https://codereview.chromium.org/1291803002
Prior to this patch clients who were solely uploading to textures (e.g., SW Mask Mgr) would cause extra flushes b.c., even though kPreferNoIO was being specified, resources with pending IO would still be returned even though there was plenty of space in the resource cache.
Review URL: https://codereview.chromium.org/1286203002
This allows removal the difficult to use (and so currently unused)
placement new and related macros to allow any constructor of T to
be used to initilize the storage of SkTLazy. This also properly
aligns the SkTLazy storage.
Review URL: https://codereview.chromium.org/1283183003
Changed childProcessor(i) to return const referencd
Fixed rootProc/parentProc offset issues; renamed a few things.
added nonempty check to gatherTransforms to avoid segfault
removed recursive append_gr_coord_transforms() from GrGLProgramBuilder
BUILDS! Changed num*includeProc() calls to num() calls
added gatherCoordTransforms(). added coordTransforms() for root proc only
Modified GrFragmentProcessor to append child proc transforms and textures to root proc's arrays.
BUG=skia:4182
Review URL: https://codereview.chromium.org/1275853005
Previously, many of our codec implementations followed the same
pattern (often in a function named handleRewind):
switch (this->rewindIfNeeded()) {
case CouldNotRewind:
return CouldNotRewind;
case NoRewindNecessary:
// keep going
break;
case Rewound:
<re-read header etc>
break;
}
In this CL, remove the enum, and put the piece that happens in the
Rewound case into a virtual function, onRewind. rewindIfNeeded now
contains the common pieces from various functions named handleRewind.
In SkBmpCodec, add a function that returns whether the BMP is in ICO,
so it can have a common implementation for onRewind.
BUG=skia:3257
Review URL: https://codereview.chromium.org/1288483002
This requires adding the stroke info to the cache key, and doing the
stroking and dashing before rendering as triangles.
BUG=skia:3755
Review URL: https://codereview.chromium.org/1275553002
